1* Atmel Quad Serial Peripheral Interface (QSPI)
2
3Required properties:
4- compatible:     Should be one of the following:
5		  - "atmel,sama5d2-qspi"
6		  - "microchip,sam9x60-qspi"
7- reg:            Should contain the locations and lengths of the base registers
8                  and the mapped memory.
9- reg-names:      Should contain the resource reg names:
10                  - qspi_base: configuration register address space
11                  - qspi_mmap: memory mapped address space
12- interrupts:     Should contain the interrupt for the device.
13- clocks:         Should reference the peripheral clock and the QSPI system
14                  clock if available.
15- clock-names:    Should contain "pclk" for the peripheral clock and "qspick"
16                  for the system clock when available.
17- #address-cells: Should be <1>.
18- #size-cells:    Should be <0>.
19
20Example:
21
22spi@f0020000 {
23	compatible = "atmel,sama5d2-qspi";
24	reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>;
25	reg-names = "qspi_base", "qspi_mmap";
26	interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
27	clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
28	clock-names = "pclk";
29	#address-cells = <1>;
30	#size-cells = <0>;
31	pinctrl-names = "default";
32	pinctrl-0 = <&pinctrl_spi0_default>;
33
34	m25p80@0 {
35		...
36	};
37};
38