1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2014, 2015 Synopsys, Inc. (www.synopsys.com)
4 */
5
6/*
7 * Device tree for AXC003 CPU card: HS38x2 (Dual Core) with IDU intc
8 */
9
10/include/ "skeleton_hs_idu.dtsi"
11
12/ {
13	compatible = "snps,arc";
14	#address-cells = <2>;
15	#size-cells = <2>;
16
17	cpu_card {
18		compatible = "simple-bus";
19		#address-cells = <1>;
20		#size-cells = <1>;
21
22		ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
23
24		input_clk: input-clk {
25			#clock-cells = <0>;
26			compatible = "fixed-clock";
27			clock-frequency = <33333333>;
28		};
29
30		core_clk: core-clk@80 {
31			compatible = "snps,axs10x-arc-pll-clock";
32			reg = <0x80 0x10>, <0x100 0x10>;
33			#clock-cells = <0>;
34			clocks = <&input_clk>;
35
36			/*
37			 * Set initial core pll output frequency to 100MHz.
38			 * It will be applied at the core pll driver probing
39			 * on early boot.
40			 */
41			assigned-clocks = <&core_clk>;
42			assigned-clock-rates = <100000000>;
43		};
44
45		core_intc: archs-intc@cpu {
46			compatible = "snps,archs-intc";
47			interrupt-controller;
48			#interrupt-cells = <1>;
49		};
50
51		idu_intc: idu-interrupt-controller {
52			compatible = "snps,archs-idu-intc";
53			interrupt-controller;
54			interrupt-parent = <&core_intc>;
55			#interrupt-cells = <1>;
56		};
57
58		/*
59		 * this GPIO block ORs all interrupts on CPU card (creg,..)
60		 * to uplink only 1 IRQ to ARC core intc
61		 */
62		dw-apb-gpio@2000 {
63			compatible = "snps,dw-apb-gpio";
64			reg = < 0x2000 0x80 >;
65			#address-cells = <1>;
66			#size-cells = <0>;
67
68			ictl_intc: gpio-controller@0 {
69				compatible = "snps,dw-apb-gpio-port";
70				gpio-controller;
71				#gpio-cells = <2>;
72				snps,nr-gpios = <30>;
73				reg = <0>;
74				interrupt-controller;
75				#interrupt-cells = <2>;
76				interrupt-parent = <&idu_intc>;
77				interrupts = <1>;
78			};
79		};
80
81		debug_uart: dw-apb-uart@5000 {
82			compatible = "snps,dw-apb-uart";
83			reg = <0x5000 0x100>;
84			clock-frequency = <33333000>;
85			interrupt-parent = <&ictl_intc>;
86			interrupts = <2 4>;
87			baud = <115200>;
88			reg-shift = <2>;
89			reg-io-width = <4>;
90		};
91
92		arcpct0: pct {
93			compatible = "snps,archs-pct";
94			#interrupt-cells = <1>;
95			interrupt-parent = <&core_intc>;
96			interrupts = <20>;
97		};
98	};
99
100	/*
101	 * Mark DMA peripherals connected via IOC port as dma-coherent. We do
102	 * it via overlay because peripherals defined in axs10x_mb.dtsi are
103	 * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so
104	 * only AXS103 board has HW-coherent DMA peripherals)
105	 * We don't need to mark pgu@17000 as dma-coherent because it uses
106	 * external DMA buffer located outside of IOC aperture.
107	 */
108	axs10x_mb {
109		ethernet@18000 {
110			dma-coherent;
111		};
112
113		usb@40000 {
114			dma-coherent;
115		};
116
117		usb@60000 {
118			dma-coherent;
119		};
120
121		mmc@15000 {
122			dma-coherent;
123		};
124	};
125
126	/*
127	 * This INTC is actually connected to DW APB GPIO
128	 * which acts as a wire between MB INTC and CPU INTC.
129	 * GPIO INTC is configured in platform init code
130	 * and here we mimic direct connection from MB INTC to
131	 * CPU INTC, thus we set "interrupts = <0 1>" instead of
132	 * "interrupts = <12>"
133	 *
134	 * This intc actually resides on MB, but we move it here to
135	 * avoid duplicating the MB dtsi file given that IRQ from
136	 * this intc to cpu intc are different for axs101 and axs103
137	 */
138	mb_intc: interrupt-controller@e0012000 {
139		#interrupt-cells = <1>;
140		compatible = "snps,dw-apb-ictl";
141		reg = < 0x0 0xe0012000 0x0 0x200 >;
142		interrupt-controller;
143		interrupt-parent = <&idu_intc>;
144		interrupts = <0>;
145	};
146
147	memory {
148		device_type = "memory";
149		/* CONFIG_LINUX_RAM_BASE needs to match low mem start */
150		reg = <0x0 0x80000000 0x0 0x20000000	/* 512 MiB low mem */
151		       0x1 0xc0000000 0x0 0x40000000>;	/* 1 GiB highmem */
152	};
153
154	reserved-memory {
155		#address-cells = <2>;
156		#size-cells = <2>;
157		ranges;
158		/*
159		 * Move frame buffer out of IOC aperture (0x8z-0xaz).
160		 */
161		frame_buffer: frame_buffer@be000000 {
162			compatible = "shared-dma-pool";
163			reg = <0x0 0xbe000000 0x0 0x2000000>;
164			no-map;
165		};
166	};
167};
168