1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Copyright 2016 Luxul Inc.
4 */
5
6/dts-v1/;
7
8#include "bcm47094.dtsi"
9#include "bcm5301x-nand-cs0-bch4.dtsi"
10
11/ {
12	compatible = "luxul,xwr-3100-v1", "brcm,bcm47094", "brcm,bcm4708";
13	model = "Luxul XWR-3100 V1";
14
15	chosen {
16		bootargs = "console=ttyS0,115200 earlycon";
17	};
18
19	memory@0 {
20		device_type = "memory";
21		reg = <0x00000000 0x08000000>,
22		      <0x88000000 0x08000000>;
23	};
24
25	nvram@1eff0000 {
26		compatible = "brcm,nvram";
27		reg = <0x1eff0000 0x10000>;
28
29		et0macaddr: et0macaddr {
30			#nvmem-cell-cells = <1>;
31		};
32	};
33
34	leds {
35		compatible = "gpio-leds";
36
37		led-power {
38			label = "bcm53xx:green:power";
39			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
40			linux,default-trigger = "default-on";
41		};
42
43		led-lan3 {
44			label = "bcm53xx:green:lan3";
45			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
46		};
47
48		led-lan4 {
49			label = "bcm53xx:green:lan4";
50			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
51		};
52
53		led-wan {
54			label = "bcm53xx:green:wan";
55			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
56		};
57
58		led-lan1 {
59			label = "bcm53xx:green:lan1";
60			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
61		};
62
63		led-lan2 {
64			label = "bcm53xx:green:lan2";
65			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
66		};
67
68		led-usb3 {
69			label = "bcm53xx:green:usb3";
70			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
71			trigger-sources = <&ohci_port1>, <&ehci_port1>,
72					  <&xhci_port1>;
73			linux,default-trigger = "usbport";
74		};
75
76		led-status {
77			label = "bcm53xx:green:status";
78			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
79			linux,default-trigger = "timer";
80		};
81
82		led-2ghz {
83			label = "bcm53xx:green:2ghz";
84			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
85		};
86
87		led-5ghz {
88			label = "bcm53xx:green:5ghz";
89			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
90		};
91	};
92
93	gpio-keys {
94		compatible = "gpio-keys";
95
96		button-restart {
97			label = "Reset";
98			linux,code = <KEY_RESTART>;
99			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
100		};
101	};
102};
103
104&usb3 {
105	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
106};
107
108&gmac0 {
109	nvmem-cells = <&et0macaddr 0>;
110	nvmem-cell-names = "mac-address";
111};
112
113&spi_nor {
114	status = "okay";
115};
116
117&usb3_phy {
118	status = "okay";
119};
120
121&srab {
122	status = "okay";
123
124	ports {
125		port@0 {
126			label = "lan4";
127		};
128
129		port@1 {
130			label = "lan3";
131		};
132
133		port@2 {
134			label = "lan2";
135		};
136
137		port@3 {
138			label = "lan1";
139		};
140
141		port@4 {
142			label = "wan";
143			nvmem-cells = <&et0macaddr 5>;
144			nvmem-cell-names = "mac-address";
145		};
146
147		port@5 {
148			label = "cpu";
149		};
150	};
151};
152