1// SPDX-License-Identifier: (GPL-2.0+ OR X11)
2/*
3 * Copyright (C) 2015 Marek Vasut <marex@denx.de>
4 */
5
6#include "socfpga_cyclone5.dtsi"
7#include <dt-bindings/gpio/gpio.h>
8#include <dt-bindings/input/input.h>
9
10/ {
11	model = "samtec VIN|ING FPGA";
12	compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga";
13
14	chosen {
15		bootargs = "earlyprintk";
16		stdout-path = "serial0:115200n8";
17	};
18
19	memory@0 {
20		name = "memory";
21		device_type = "memory";
22		reg = <0x0 0x40000000>; /* 1GB */
23	};
24
25	aliases {
26		/*
27		 * This allow the ethaddr uboot environment variable contents
28		 * to be added to the gmac1 device tree blob.
29		 */
30		ethernet0 = &gmac1;
31		ethernet1 = &gmac0;
32	};
33
34	gpio-keys {
35		compatible = "gpio-keys";
36
37		hps_temp0 {
38			label = "BTN_0";			/* TEMP_OS */
39			gpios = <&portc 18 GPIO_ACTIVE_LOW>;	/* HPS_GPI5 */
40			linux,code = <BTN_0>;
41		};
42
43		hps_hkey0 {
44			label = "GP_SWITCH";			/* GP_SWITCH */
45			gpios = <&portc 19 GPIO_ACTIVE_LOW>;	/* HPS_GPI6 */
46			linux,code = <BTN_1>;
47		};
48
49		hps_hkey1 {
50			label = "RESET_SWITCH";			/* RESET_SWITCH */
51			gpios = <&portc 20 GPIO_ACTIVE_LOW>;	/* HPS_GPI7 */
52			linux,code = <BTN_2>;
53		};
54
55		hps_hkey2 {
56			label = "POWER_DOWN";			/* POWER_DOWN */
57			gpios = <&portc 4 GPIO_ACTIVE_LOW>;	/* HPS_GPIO62 */
58			linux,code = <KEY_POWER>;
59		};
60
61		hps_hkey3 {
62			label = "SENSE";			/* SENSE */
63			gpios = <&porta 9 GPIO_ACTIVE_LOW>;	/* HPS_GPIO9 */
64			linux,code = <BTN_3>;
65		};
66	};
67
68	regulator-usb-nrst {
69		compatible = "regulator-fixed";
70		regulator-name = "usb_nrst";
71		regulator-min-microvolt = <5000000>;
72		regulator-max-microvolt = <5000000>;
73		gpio = <&portb 5 GPIO_ACTIVE_HIGH>;
74		startup-delay-us = <70000>;
75		enable-active-high;
76		regulator-always-on;
77	};
78};
79
80&gmac1 {
81	status = "okay";
82	phy-mode = "rgmii";
83	phy-handle = <&phy1>;
84
85	snps,reset-gpio = <&porta 0 GPIO_ACTIVE_LOW>;
86	snps,reset-active-low;
87	snps,reset-delays-us = <10000 10000 10000>;
88
89	mdio0 {
90		#address-cells = <1>;
91		#size-cells = <0>;
92		compatible = "snps,dwmac-mdio";
93		phy1: ethernet-phy@1 {
94			reg = <1>;
95			rxd0-skew-ps = <0>;
96			rxd1-skew-ps = <0>;
97			rxd2-skew-ps = <0>;
98			rxd3-skew-ps = <0>;
99			txd0-skew-ps = <0>;
100			txd1-skew-ps = <0>;
101			txd2-skew-ps = <0>;
102			txd3-skew-ps = <0>;
103			txen-skew-ps = <0>;
104			txc-skew-ps = <1860>;
105			rxdv-skew-ps = <0>;
106			rxc-skew-ps = <1860>;
107		};
108	};
109};
110
111&gpio0 {	/* GPIO 0..29 */
112	status = "okay";
113};
114
115&gpio1 {	/* GPIO 30..57 */
116	status = "okay";
117};
118
119&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
120	status = "okay";
121};
122
123&i2c0 {
124	status = "okay";
125
126	gpio: pca9557@1f {
127		compatible = "nxp,pca9557";
128		reg = <0x1f>;
129		gpio-controller;
130		#gpio-cells = <2>;
131	};
132
133	temp: lm75@48 {
134		compatible = "lm75";
135		reg = <0x48>;
136	};
137
138	at24@50 {
139		compatible = "atmel,24c01";
140		pagesize = <8>;
141		reg = <0x50>;
142	};
143
144	i2c-mux@70 {
145		compatible = "nxp,pca9548";
146		#address-cells = <1>;
147		#size-cells = <0>;
148		reg = <0x70>;
149
150		i2c@0 {
151			#address-cells = <1>;
152			#size-cells = <0>;
153			reg = <0>;
154		};
155
156		i2c@1 {
157			#address-cells = <1>;
158			#size-cells = <0>;
159			reg = <1>;
160		};
161
162		i2c@2 {
163			#address-cells = <1>;
164			#size-cells = <0>;
165			reg = <2>;
166		};
167
168		i2c@3 {
169			#address-cells = <1>;
170			#size-cells = <0>;
171			reg = <3>;
172		};
173
174		i2c@4 {
175			#address-cells = <1>;
176			#size-cells = <0>;
177			reg = <4>;
178		};
179
180		i2c@5 {
181			#address-cells = <1>;
182			#size-cells = <0>;
183			reg = <5>;
184		};
185
186		i2c@6 {	/* Backplane EEPROM */
187			#address-cells = <1>;
188			#size-cells = <0>;
189			reg = <6>;
190			eeprom@51 {
191				compatible = "atmel,24c01";
192				pagesize = <8>;
193				reg = <0x51>;
194			};
195		};
196
197		i2c@7 {	/* Power board EEPROM */
198			#address-cells = <1>;
199			#size-cells = <0>;
200			reg = <7>;
201			eeprom@51 {
202				compatible = "atmel,24c01";
203				pagesize = <8>;
204				reg = <0x51>;
205			};
206		};
207	};
208};
209
210&i2c1 {
211	status = "okay";
212	clock-frequency = <100000>;
213
214	at24@50 {
215		compatible = "atmel,24c02";
216		pagesize = <8>;
217		reg = <0x50>;
218	};
219};
220
221&qspi {
222	status = "okay";
223
224	flash@0 {
225		#address-cells = <1>;
226		#size-cells = <1>;
227		compatible = "micron,n25q128", "jedec,spi-nor";
228		reg = <0>;		/* chip select */
229		spi-max-frequency = <100000000>;
230		m25p,fast-read;
231
232		cdns,page-size = <256>;
233		cdns,block-size = <16>;
234		cdns,read-delay = <4>;
235		cdns,tshsl-ns = <50>;
236		cdns,tsd2d-ns = <50>;
237		cdns,tchsh-ns = <4>;
238		cdns,tslch-ns = <4>;
239	};
240
241	flash@1 {
242		#address-cells = <1>;
243		#size-cells = <1>;
244		compatible = "micron,mt25qu02g", "jedec,spi-nor";
245		reg = <1>;		/* chip select */
246		spi-max-frequency = <100000000>;
247		m25p,fast-read;
248
249		cdns,page-size = <256>;
250		cdns,block-size = <16>;
251		cdns,read-delay = <4>;
252		cdns,tshsl-ns = <50>;
253		cdns,tsd2d-ns = <50>;
254		cdns,tchsh-ns = <4>;
255		cdns,tslch-ns = <4>;
256	};
257};
258
259&usb0 {
260	dr_mode = "host";
261	status = "okay";
262};
263
264&usb1 {
265	dr_mode = "peripheral";
266	status = "okay";
267};
268