1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright 2019 Gateworks Corporation
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/linux-event-codes.h>
8#include <dt-bindings/interrupt-controller/irq.h>
9
10/ {
11	/* these are used by bootloader for disabling nodes */
12	aliases {
13		led0 = &led0;
14		led1 = &led1;
15		led2 = &led2;
16	};
17
18	chosen {
19		stdout-path = &uart2;
20	};
21
22	memory@10000000 {
23		device_type = "memory";
24		reg = <0x10000000 0x20000000>;
25	};
26
27	gpio-keys {
28		compatible = "gpio-keys";
29
30		user-pb {
31			label = "user_pb";
32			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
33			linux,code = <BTN_0>;
34		};
35
36		user-pb1x {
37			label = "user_pb1x";
38			linux,code = <BTN_1>;
39			interrupt-parent = <&gsc>;
40			interrupts = <0>;
41		};
42
43		key-erased {
44			label = "key-erased";
45			linux,code = <BTN_2>;
46			interrupt-parent = <&gsc>;
47			interrupts = <1>;
48		};
49
50		eeprom-wp {
51			label = "eeprom_wp";
52			linux,code = <BTN_3>;
53			interrupt-parent = <&gsc>;
54			interrupts = <2>;
55		};
56
57		tamper {
58			label = "tamper";
59			linux,code = <BTN_4>;
60			interrupt-parent = <&gsc>;
61			interrupts = <5>;
62		};
63
64		switch-hold {
65			label = "switch_hold";
66			linux,code = <BTN_5>;
67			interrupt-parent = <&gsc>;
68			interrupts = <7>;
69		};
70	};
71
72	leds {
73		compatible = "gpio-leds";
74		pinctrl-names = "default";
75		pinctrl-0 = <&pinctrl_gpio_leds>;
76
77		led0: led-user1 {
78			label = "user1";
79			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
80			default-state = "on";
81			linux,default-trigger = "heartbeat";
82		};
83
84		led1: led-user2 {
85			label = "user2";
86			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
87			default-state = "off";
88		};
89
90		led2: led-user3 {
91			label = "user3";
92			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
93			default-state = "off";
94		};
95	};
96
97	pps {
98		compatible = "pps-gpio";
99		pinctrl-names = "default";
100		pinctrl-0 = <&pinctrl_pps>;
101		gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
102		status = "okay";
103	};
104
105	reg_3p3v: regulator-3p3v {
106		compatible = "regulator-fixed";
107		regulator-name = "3P3V";
108		regulator-min-microvolt = <3300000>;
109		regulator-max-microvolt = <3300000>;
110		regulator-always-on;
111	};
112
113	reg_5p0v: regulator-5p0v {
114		compatible = "regulator-fixed";
115		regulator-name = "5P0V";
116		regulator-min-microvolt = <5000000>;
117		regulator-max-microvolt = <5000000>;
118		regulator-always-on;
119	};
120
121	reg_wl: regulator-wl {
122		pinctrl-names = "default";
123		pinctrl-0 = <&pinctrl_reg_wl>;
124		compatible = "regulator-fixed";
125		regulator-name = "wl";
126		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
127		startup-delay-us = <100>;
128		enable-active-high;
129		regulator-min-microvolt = <3300000>;
130		regulator-max-microvolt = <3300000>;
131	};
132};
133
134
135&ecspi3 {
136	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
137	pinctrl-names = "default";
138	pinctrl-0 = <&pinctrl_ecspi3>;
139	status = "okay";
140};
141
142&fec {
143	pinctrl-names = "default";
144	pinctrl-0 = <&pinctrl_enet>;
145	phy-mode = "rgmii-id";
146	status = "okay";
147};
148
149&gpmi {
150	pinctrl-names = "default";
151	pinctrl-0 = <&pinctrl_gpmi_nand>;
152	status = "okay";
153};
154
155&i2c1 {
156	clock-frequency = <100000>;
157	pinctrl-names = "default";
158	pinctrl-0 = <&pinctrl_i2c1>;
159	status = "okay";
160
161	gsc: gsc@20 {
162		compatible = "gw,gsc";
163		reg = <0x20>;
164		interrupt-parent = <&gpio1>;
165		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
166		interrupt-controller;
167		#interrupt-cells = <1>;
168		#size-cells = <0>;
169
170		adc {
171			compatible = "gw,gsc-adc";
172			#address-cells = <1>;
173			#size-cells = <0>;
174
175			channel@6 {
176				gw,mode = <0>;
177				reg = <0x06>;
178				label = "temp";
179			};
180
181			channel@8 {
182				gw,mode = <3>;
183				reg = <0x08>;
184				label = "vdd_bat";
185			};
186
187			channel@82 {
188				gw,mode = <2>;
189				reg = <0x82>;
190				label = "vdd_vin";
191				gw,voltage-divider-ohms = <22100 1000>;
192				gw,voltage-offset-microvolt = <800000>;
193			};
194
195			channel@84 {
196				gw,mode = <2>;
197				reg = <0x84>;
198				label = "vdd_5p0";
199				gw,voltage-divider-ohms = <22100 10000>;
200			};
201
202			channel@86 {
203				gw,mode = <2>;
204				reg = <0x86>;
205				label = "vdd_3p3";
206				gw,voltage-divider-ohms = <10000 10000>;
207			};
208
209			channel@88 {
210				gw,mode = <2>;
211				reg = <0x88>;
212				label = "vdd_2p5";
213				gw,voltage-divider-ohms = <10000 10000>;
214			};
215
216			channel@8c {
217				gw,mode = <2>;
218				reg = <0x8c>;
219				label = "vdd_3p0";
220			};
221
222			channel@8e {
223				gw,mode = <2>;
224				reg = <0x8e>;
225				label = "vdd_arm";
226			};
227
228			channel@90 {
229				gw,mode = <2>;
230				reg = <0x90>;
231				label = "vdd_soc";
232			};
233
234			channel@92 {
235				gw,mode = <2>;
236				reg = <0x92>;
237				label = "vdd_1p5";
238			};
239
240			channel@98 {
241				gw,mode = <2>;
242				reg = <0x98>;
243				label = "vdd_1p8";
244			};
245
246			channel@9a {
247				gw,mode = <2>;
248				reg = <0x9a>;
249				label = "vdd_1p0";
250				gw,voltage-divider-ohms = <10000 10000>;
251			};
252
253			channel@9c {
254				gw,mode = <2>;
255				reg = <0x9c>;
256				label = "vdd_an1";
257				gw,voltage-divider-ohms = <10000 10000>;
258			};
259
260			channel@a2 {
261				gw,mode = <2>;
262				reg = <0xa2>;
263				label = "vdd_gsc";
264				gw,voltage-divider-ohms = <10000 10000>;
265			};
266		};
267	};
268
269	gsc_gpio: gpio@23 {
270		compatible = "nxp,pca9555";
271		reg = <0x23>;
272		gpio-controller;
273		#gpio-cells = <2>;
274		interrupt-parent = <&gsc>;
275		interrupts = <4>;
276	};
277
278	eeprom@50 {
279		compatible = "atmel,24c02";
280		reg = <0x50>;
281		pagesize = <16>;
282	};
283
284	eeprom@51 {
285		compatible = "atmel,24c02";
286		reg = <0x51>;
287		pagesize = <16>;
288	};
289
290	eeprom@52 {
291		compatible = "atmel,24c02";
292		reg = <0x52>;
293		pagesize = <16>;
294	};
295
296	eeprom@53 {
297		compatible = "atmel,24c02";
298		reg = <0x53>;
299		pagesize = <16>;
300	};
301
302	rtc@68 {
303		compatible = "dallas,ds1672";
304		reg = <0x68>;
305	};
306};
307
308&i2c2 {
309	clock-frequency = <100000>;
310	pinctrl-names = "default";
311	pinctrl-0 = <&pinctrl_i2c2>;
312	status = "okay";
313};
314
315&i2c3 {
316	clock-frequency = <100000>;
317	pinctrl-names = "default";
318	pinctrl-0 = <&pinctrl_i2c3>;
319	status = "okay";
320
321	accel@19 {
322		pinctrl-names = "default";
323		pinctrl-0 = <&pinctrl_accel>;
324		compatible = "st,lis2de12";
325		reg = <0x19>;
326		st,drdy-int-pin = <1>;
327		interrupt-parent = <&gpio7>;
328		interrupts = <13 0>;
329		interrupt-names = "INT1";
330	};
331};
332
333&pcie {
334	pinctrl-names = "default";
335	pinctrl-0 = <&pinctrl_pcie>;
336	reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
337	status = "okay";
338};
339
340&pwm2 {
341	pinctrl-names = "default";
342	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
343	status = "disabled";
344};
345
346&pwm3 {
347	pinctrl-names = "default";
348	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
349	status = "disabled";
350};
351
352/* off-board RS232 */
353&uart1 {
354	pinctrl-names = "default";
355	pinctrl-0 = <&pinctrl_uart1>;
356	status = "okay";
357};
358
359/* serial console */
360&uart2 {
361	pinctrl-names = "default";
362	pinctrl-0 = <&pinctrl_uart2>;
363	status = "okay";
364};
365
366/* cc1352 */
367&uart3 {
368	pinctrl-names = "default";
369	pinctrl-0 = <&pinctrl_uart3>;
370	uart-has-rtscts;
371	status = "okay";
372};
373
374/* Sterling-LWB Bluetooth */
375&uart4 {
376	pinctrl-names = "default";
377	pinctrl-0 = <&pinctrl_uart4>,<&pinctrl_bten>;
378	uart-has-rtscts;
379	status = "okay";
380
381	bluetooth {
382		compatible = "brcm,bcm4330-bt";
383		shutdown-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
384	};
385};
386
387/* GPS */
388&uart5 {
389	pinctrl-names = "default";
390	pinctrl-0 = <&pinctrl_uart5>;
391	status = "okay";
392};
393
394&usbotg {
395	vbus-supply = <&reg_5p0v>;
396	pinctrl-names = "default";
397	pinctrl-0 = <&pinctrl_usbotg>;
398	disable-over-current;
399	status = "okay";
400};
401
402&usbh1 {
403	status = "okay";
404};
405
406/* Sterling-LWB SDIO WiFi */
407&usdhc2 {
408	pinctrl-names = "default";
409	pinctrl-0 = <&pinctrl_usdhc2>;
410	vmmc-supply = <&reg_wl>;
411	non-removable;
412	bus-width = <4>;
413	status = "okay";
414};
415
416&usdhc3 {
417	pinctrl-names = "default", "state_100mhz", "state_200mhz";
418	pinctrl-0 = <&pinctrl_usdhc3>;
419	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
420	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
421	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
422	vmmc-supply = <&reg_3p3v>;
423	status = "okay";
424};
425
426&wdog1 {
427	pinctrl-names = "default";
428	pinctrl-0 = <&pinctrl_wdog>;
429	fsl,ext-reset-output;
430};
431
432&iomuxc {
433	pinctrl_accel: accelmuxgrp {
434		fsl,pins = <
435			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b1
436		>;
437	};
438
439	pinctrl_bten: btengrp {
440		fsl,pins = <
441			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1
442		>;
443	};
444
445	pinctrl_ecspi3: escpi3grp {
446		fsl,pins = <
447			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
448			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
449			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
450			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
451		>;
452	};
453
454	pinctrl_enet: enetgrp {
455		fsl,pins = <
456			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
457			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
458			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
459			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
460			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
461			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
462			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
463			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
464			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
465			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
466			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
467			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
468			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
469			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
470			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
471			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
472			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
473		>;
474	};
475
476	pinctrl_gpio_leds: gpioledsgrp {
477		fsl,pins = <
478			MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
479			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
480			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
481		>;
482	};
483
484	pinctrl_gpmi_nand: gpminandgrp {
485		fsl,pins = <
486			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
487			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
488			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
489			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
490			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
491			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
492			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
493			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
494			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
495			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
496			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
497			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
498			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
499			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
500			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
501		>;
502	};
503
504	pinctrl_i2c1: i2c1grp {
505		fsl,pins = <
506			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
507			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
508			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
509		>;
510	};
511
512	pinctrl_i2c2: i2c2grp {
513		fsl,pins = <
514			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
515			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
516		>;
517	};
518
519	pinctrl_i2c3: i2c3grp {
520		fsl,pins = <
521			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
522			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
523		>;
524	};
525
526	pinctrl_pcie: pciegrp {
527		fsl,pins = <
528			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
529		>;
530	};
531
532	pinctrl_pps: ppsgrp {
533		fsl,pins = <
534			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16	0x1b0b1
535		>;
536	};
537
538	pinctrl_pwm2: pwm2grp {
539		fsl,pins = <
540			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
541		>;
542	};
543
544	pinctrl_pwm3: pwm3grp {
545		fsl,pins = <
546			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
547		>;
548	};
549
550	pinctrl_reg_wl: regwlgrp {
551		fsl,pins = <
552			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1
553		>;
554	};
555
556	pinctrl_uart1: uart1grp {
557		fsl,pins = <
558			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
559			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
560		>;
561	};
562
563	pinctrl_uart2: uart2grp {
564		fsl,pins = <
565			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
566			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
567		>;
568	};
569
570	pinctrl_uart3: uart3grp {
571		fsl,pins = <
572			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
573			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
574			MX6QDL_PAD_EIM_D23__UART3_RTS_B		0x1b0b1
575			MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
576			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x4001b0b1 /* DIO20 */
577			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x4001b0b1 /* DIO14 */
578			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x4001b0b1 /* DIO15 */
579			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b0b1 /* TMS */
580			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b1 /* TCK */
581			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x1b0b1 /* TDO */
582			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b0b1 /* TDI */
583			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x4001b0b1 /* RST# */
584		>;
585	};
586
587	pinctrl_uart4: uart4grp {
588		fsl,pins = <
589			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
590			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
591			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
592			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
593		>;
594	};
595
596	pinctrl_uart5: uart5grp {
597		fsl,pins = <
598			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
599			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
600		>;
601	};
602
603	pinctrl_usbotg: usbotggrp {
604		fsl,pins = <
605			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
606		>;
607	};
608
609	pinctrl_usdhc2: usdhc2grp {
610		fsl,pins = <
611			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
612			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
613			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
614			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
615			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
616			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
617		>;
618	};
619
620	pinctrl_usdhc3: usdhc3grp {
621		fsl,pins = <
622			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
623			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
624			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
625			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
626			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
627			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
628			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
629			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
630		>;
631	};
632
633	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
634		fsl,pins = <
635			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
636			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
637			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
638			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
639			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
640			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
641			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
642			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
643		>;
644	};
645
646	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
647		fsl,pins = <
648			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
649			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
650			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
651			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
652			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
653			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
654			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
655			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
656		>;
657	};
658
659	pinctrl_wdog: wdoggrp {
660		fsl,pins = <
661			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
662		>;
663	};
664};
665