1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
4 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
5 */
6
7#include "omap3-tao3530.dtsi"
8
9/ {
10	gpio_poweroff {
11		pinctrl-names = "default";
12		pinctrl-0 = <&poweroff_pins>;
13
14		compatible = "gpio-poweroff";
15		gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;	/* GPIO 168 */
16	};
17};
18
19&omap3_pmx_core {
20	sound2_pins: sound2-pins {
21		pinctrl-single,pins = <
22			OMAP3_CORE1_IOPAD(0x209e, PIN_OUTPUT | MUX_MODE4)	/* gpmc_d8 gpio_44 */
23		>;
24	};
25
26	led_blue_pins: led-blue-pins {
27		pinctrl-single,pins = <
28			OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE4)	/* cam_xclka gpio_96, LED blue */
29		>;
30	};
31
32	led_green_pins: led-green-pins {
33		pinctrl-single,pins = <
34			OMAP3_CORE1_IOPAD(0x2126, PIN_OUTPUT | MUX_MODE4)	/* cam_d8 gpio_107, LED green */
35		>;
36	};
37
38	led_red_pins: led-red-pins {
39		pinctrl-single,pins = <
40			OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* cam_xclkb gpio_111, LED red */
41		>;
42	};
43
44	poweroff_pins: poweroff-pins {
45		pinctrl-single,pins = <
46			OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* i2c2_scl gpio_168 */
47		>;
48	};
49
50	powerdown_input_pins: powerdown-input-pins {
51		pinctrl-single,pins = <
52			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE4)	/* i2c2_sda gpio_183 */
53		>;
54	};
55
56	fpga_boot0_pins: fpga-boot0-pins {
57		pinctrl-single,pins = <
58			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4)	/* cam_d2 gpio_101 */
59			OMAP3_CORE1_IOPAD(0x211c, PIN_OUTPUT | MUX_MODE4)	/* cam_d3 gpio_102 */
60			OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE4)	/* cam_d4 gpio_103 */
61			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_d5 gpio_104 */
62		>;
63	};
64
65	fpga_boot1_pins: fpga-boot1-pins {
66		pinctrl-single,pins = <
67			OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE4)	/* gpmc_d10 gpio_46 */
68			OMAP3_CORE1_IOPAD(0x20a4, PIN_OUTPUT | MUX_MODE4)	/* gpmc_d11 gpio_47 */
69			OMAP3_CORE1_IOPAD(0x20a6, PIN_OUTPUT | MUX_MODE4)	/* gpmc_d12 gpio_48 */
70			OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_d13 gpio_49 */
71		>;
72	};
73};
74
75/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */
76&i2c2 {
77	status = "disabled";
78};
79
80&i2c3 {
81	clock-frequency = <100000>;
82
83	pinctrl-names = "default";
84	pinctrl-0 = <&i2c3_pins>;
85};
86