1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree Include file for Freescale Layerscape-1043A family SoC.
4 *
5 * Copyright 2014-2015 Freescale Semiconductor, Inc.
6 * Copyright 2018-2021 NXP
7 *
8 * Mingkai Hu <Mingkai.hu@freescale.com>
9 */
10
11/dts-v1/;
12#include "fsl-ls1043a.dtsi"
13
14/ {
15	model = "LS1043A QDS Board";
16	compatible = "fsl,ls1043a-qds", "fsl,ls1043a";
17
18	aliases {
19		gpio0 = &gpio1;
20		gpio1 = &gpio2;
21		gpio2 = &gpio3;
22		gpio3 = &gpio4;
23		serial0 = &duart0;
24		serial1 = &duart1;
25		serial2 = &duart2;
26		serial3 = &duart3;
27		sgmii-riser-s1-p1 = &sgmii_phy_s1_p1;
28		sgmii-riser-s2-p1 = &sgmii_phy_s2_p1;
29		sgmii-riser-s3-p1 = &sgmii_phy_s3_p1;
30		sgmii-riser-s4-p1 = &sgmii_phy_s4_p1;
31		qsgmii-s1-p1 = &qsgmii_phy_s1_p1;
32		qsgmii-s1-p2 = &qsgmii_phy_s1_p2;
33		qsgmii-s1-p3 = &qsgmii_phy_s1_p3;
34		qsgmii-s1-p4 = &qsgmii_phy_s1_p4;
35		qsgmii-s2-p1 = &qsgmii_phy_s2_p1;
36		qsgmii-s2-p2 = &qsgmii_phy_s2_p2;
37		qsgmii-s2-p3 = &qsgmii_phy_s2_p3;
38		qsgmii-s2-p4 = &qsgmii_phy_s2_p4;
39		emi1-slot1 = &ls1043mdio_s1;
40		emi1-slot2 = &ls1043mdio_s2;
41		emi1-slot3 = &ls1043mdio_s3;
42		emi1-slot4 = &ls1043mdio_s4;
43	};
44
45	chosen {
46		stdout-path = "serial0:115200n8";
47	};
48};
49
50&duart0 {
51	status = "okay";
52};
53
54&duart1 {
55	status = "okay";
56};
57
58&ifc {
59	#address-cells = <2>;
60	#size-cells = <1>;
61	/* NOR, NAND Flashes and FPGA on board */
62	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
63		  0x1 0x0 0x0 0x7e800000 0x00010000
64		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
65	status = "okay";
66
67	nor@0,0 {
68		compatible = "cfi-flash";
69		reg = <0x0 0x0 0x8000000>;
70		big-endian;
71		bank-width = <2>;
72		device-width = <1>;
73	};
74
75	nand@1,0 {
76		compatible = "fsl,ifc-nand";
77		reg = <0x1 0x0 0x10000>;
78	};
79
80	fpga: board-control@2,0 {
81		compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis", "simple-mfd";
82		reg = <0x2 0x0 0x0000100>;
83		#address-cells = <1>;
84		#size-cells = <1>;
85		ranges = <0 2 0 0x100>;
86	};
87};
88
89&i2c0 {
90	status = "okay";
91
92	i2c-mux@77 {
93		compatible = "nxp,pca9547";
94		reg = <0x77>;
95		#address-cells = <1>;
96		#size-cells = <0>;
97
98		i2c@0 {
99			#address-cells = <1>;
100			#size-cells = <0>;
101			reg = <0x0>;
102
103			rtc@68 {
104				compatible = "dallas,ds3232";
105				reg = <0x68>;
106				/* IRQ10_B */
107				interrupts = <0 150 0x4>;
108			};
109		};
110
111		i2c@2 {
112			#address-cells = <1>;
113			#size-cells = <0>;
114			reg = <0x2>;
115
116			ina220@40 {
117				compatible = "ti,ina220";
118				reg = <0x40>;
119				shunt-resistor = <1000>;
120			};
121
122			ina220@41 {
123				compatible = "ti,ina220";
124				reg = <0x41>;
125				shunt-resistor = <1000>;
126			};
127		};
128
129		i2c@3 {
130			#address-cells = <1>;
131			#size-cells = <0>;
132			reg = <0x3>;
133
134			eeprom@56 {
135				compatible = "atmel,24c512";
136				reg = <0x56>;
137			};
138
139			eeprom@57 {
140				compatible = "atmel,24c512";
141				reg = <0x57>;
142			};
143
144			temp-sensor@4c {
145				compatible = "adi,adt7461a";
146				reg = <0x4c>;
147			};
148		};
149	};
150};
151
152&lpuart0 {
153	status = "okay";
154};
155
156&qspi {
157	status = "okay";
158
159	qflash0: flash@0 {
160		compatible = "spansion,m25p80";
161		#address-cells = <1>;
162		#size-cells = <1>;
163		spi-max-frequency = <20000000>;
164		spi-rx-bus-width = <4>;
165		spi-tx-bus-width = <4>;
166		reg = <0>;
167	};
168};
169
170&usb0 {
171	status = "okay";
172};
173
174#include "fsl-ls1043-post.dtsi"
175
176&fman0 {
177	ethernet@e0000 {
178		phy-handle = <&qsgmii_phy_s2_p1>;
179		phy-connection-type = "sgmii";
180	};
181
182	ethernet@e2000 {
183		phy-handle = <&qsgmii_phy_s2_p2>;
184		phy-connection-type = "sgmii";
185	};
186
187	ethernet@e4000 {
188		phy-handle = <&rgmii_phy1>;
189		phy-connection-type = "rgmii";
190	};
191
192	ethernet@e6000 {
193		phy-handle = <&rgmii_phy2>;
194		phy-connection-type = "rgmii";
195	};
196
197	ethernet@e8000 {
198		phy-handle = <&qsgmii_phy_s2_p3>;
199		phy-connection-type = "sgmii";
200	};
201
202	ethernet@ea000 {
203		phy-handle = <&qsgmii_phy_s2_p4>;
204		phy-connection-type = "sgmii";
205	};
206
207	ethernet@f0000 { /* DTSEC9/10GEC1 */
208		fixed-link = <1 1 10000 0 0>;
209		phy-connection-type = "xgmii";
210	};
211};
212
213&fpga {
214	mdio-mux-emi1@54 {
215		compatible = "mdio-mux-mmioreg", "mdio-mux";
216		mdio-parent-bus = <&mdio0>;
217		#address-cells = <1>;
218		#size-cells = <0>;
219		reg = <0x54 1>;    /* BRDCFG4 */
220		mux-mask = <0xe0>; /* EMI1 */
221
222		/* On-board RGMII1 PHY */
223		ls1043mdio0: mdio@0 {
224			reg = <0>;
225			#address-cells = <1>;
226			#size-cells = <0>;
227
228			rgmii_phy1: ethernet-phy@1 { /* MAC3 */
229				reg = <0x1>;
230			};
231		};
232
233		/* On-board RGMII2 PHY */
234		ls1043mdio1: mdio@20 {
235			reg = <0x20>;
236			#address-cells = <1>;
237			#size-cells = <0>;
238
239			rgmii_phy2: ethernet-phy@2 { /* MAC4 */
240				reg = <0x2>;
241			};
242		};
243
244		/* Slot 1 */
245		ls1043mdio_s1: mdio@40 {
246			reg = <0x40>;
247			#address-cells = <1>;
248			#size-cells = <0>;
249			status = "disabled";
250
251			qsgmii_phy_s1_p1: ethernet-phy@4 {
252				reg = <0x4>;
253			};
254
255			qsgmii_phy_s1_p2: ethernet-phy@5 {
256				reg = <0x5>;
257			};
258
259			qsgmii_phy_s1_p3: ethernet-phy@6 {
260				reg = <0x6>;
261			};
262
263			qsgmii_phy_s1_p4: ethernet-phy@7 {
264				reg = <0x7>;
265			};
266
267			sgmii_phy_s1_p1: ethernet-phy@1c {
268				reg = <0x1c>;
269			};
270		};
271
272		/* Slot 2 */
273		ls1043mdio_s2: mdio@60 {
274			reg = <0x60>;
275			#address-cells = <1>;
276			#size-cells = <0>;
277			status = "disabled";
278
279			qsgmii_phy_s2_p1: ethernet-phy@8 {
280				reg = <0x8>;
281			};
282
283			qsgmii_phy_s2_p2: ethernet-phy@9 {
284				reg = <0x9>;
285			};
286
287			qsgmii_phy_s2_p3: ethernet-phy@a {
288				reg = <0xa>;
289			};
290
291			qsgmii_phy_s2_p4: ethernet-phy@b {
292				reg = <0xb>;
293			};
294
295			sgmii_phy_s2_p1: ethernet-phy@1c {
296				reg = <0x1c>;
297			};
298		};
299
300		/* Slot 3 */
301		ls1043mdio_s3: mdio@80 {
302			reg = <0x80>;
303			#address-cells = <1>;
304			#size-cells = <0>;
305			status = "disabled";
306
307			sgmii_phy_s3_p1: ethernet-phy@1c {
308				reg = <0x1c>;
309			};
310		};
311
312		/* Slot 4 */
313		ls1043mdio_s4: mdio@a0 {
314			reg = <0xa0>;
315			#address-cells = <1>;
316			#size-cells = <0>;
317			status = "disabled";
318
319			sgmii_phy_s4_p1: ethernet-phy@1c {
320				reg = <0x1c>;
321			};
322		};
323	};
324};
325