1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
4 * D-82229 Seefeld, Germany.
5 * Author: Gregor Herburger
6 */
7
8#include "fsl-lx2160a.dtsi"
9
10/ {
11	reg_vcc3v3: regulator-vcc3v3 {
12		compatible = "regulator-fixed";
13		regulator-name = "VCC3V3";
14		regulator-min-microvolt = <3300000>;
15		regulator-max-microvolt = <3300000>;
16		regulator-always-on;
17	};
18};
19
20
21&emdio1 {
22	status = "okay";
23};
24
25&emdio2 {
26	status = "okay";
27};
28
29&esdhc1 {
30	bus-width = <8>;
31	no-sd;
32	no-sdio;
33	non-removable;
34	mmc-hs200-1_8v;
35	status = "okay";
36};
37
38&fspi {
39	status = "okay";
40
41	flash0: flash@0 {
42		compatible = "jedec,spi-nor";
43		reg = <0>;
44		#address-cells = <1>;
45		#size-cells = <1>;
46		spi-max-frequency = <10000000>;
47		spi-rx-bus-width = <1>;
48		spi-tx-bus-width = <1>;
49
50		partitions {
51			compatible = "fixed-partitions";
52			#address-cells = <1>;
53			#size-cells = <1>;
54		};
55	};
56
57	flash1: flash@1 {
58		compatible = "jedec,spi-nor";
59		reg = <1>;
60		#address-cells = <1>;
61		#size-cells = <1>;
62		spi-max-frequency = <10000000>;
63		spi-rx-bus-width = <1>;
64		spi-tx-bus-width = <1>;
65	};
66};
67
68&i2c0 {
69	scl-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
70	status = "okay";
71
72	sensor0: temperature-sensor@1f {
73		compatible = "nxp,se97", "jedec,jc-42.4-temp";
74		reg = <0x1f>;
75	};
76
77	eeprom1: eeprom@57 {
78		compatible = "atmel,24c02";
79		reg = <0x57>;
80		pagesize = <16>;
81		read-only;
82		vcc-supply = <&reg_vcc3v3>;
83	};
84
85	rtc: rtc@51 {
86		compatible = "nxp,pcf85063a";
87		reg = <0x51>;
88		quartz-load-femtofarads = <12500>;
89	};
90
91	eeprom2: eeprom@50 {
92		compatible = "atmel,24c64";
93		reg = <0x50>;
94		pagesize = <32>;
95		vcc-supply = <&reg_vcc3v3>;
96	};
97};
98