1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2/*
3 * Copyright 2020 Compass Electronics Group, LLC
4 */
5
6/ {
7	leds {
8		compatible = "gpio-leds";
9
10		led-0 {
11			label = "gen_led0";
12			gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
13			default-state = "off";
14		};
15
16		led-1 {
17			label = "gen_led1";
18			gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
19			default-state = "off";
20		};
21
22		led-2 {
23			label = "gen_led2";
24			gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
25			default-state = "off";
26		};
27
28		led-3 {
29			pinctrl-names = "default";
30			pinctrl-0 = <&pinctrl_led3>;
31			label = "heartbeat";
32			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
33			linux,default-trigger = "heartbeat";
34		};
35	};
36
37	reg_audio: regulator-audio {
38		compatible = "regulator-fixed";
39		regulator-name = "3v3_aud";
40		regulator-min-microvolt = <3300000>;
41		regulator-max-microvolt = <3300000>;
42		gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
43		enable-active-high;
44	};
45
46	reg_usdhc2_vmmc: regulator-usdhc2 {
47		compatible = "regulator-fixed";
48		regulator-name = "vsd_3v3";
49		regulator-min-microvolt = <3300000>;
50		regulator-max-microvolt = <3300000>;
51		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
52		enable-active-high;
53	};
54
55	reg_usb_otg_vbus: regulator-usb {
56		compatible = "regulator-fixed";
57		pinctrl-names = "default";
58		pinctrl-0 = <&pinctrl_reg_usb_otg>;
59		regulator-name = "usb_otg_vbus";
60		regulator-min-microvolt = <5000000>;
61		regulator-max-microvolt = <5000000>;
62		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
63		enable-active-high;
64	};
65
66	sound {
67		compatible = "fsl,imx-audio-wm8962";
68		model = "wm8962-audio";
69		audio-cpu = <&sai3>;
70		audio-codec = <&wm8962>;
71		audio-routing =
72			"Headphone Jack", "HPOUTL",
73			"Headphone Jack", "HPOUTR",
74			"Ext Spk", "SPKOUTL",
75			"Ext Spk", "SPKOUTR",
76			"AMIC", "MICBIAS",
77			"IN3R", "AMIC";
78	};
79};
80
81&ecspi2 {
82	pinctrl-names = "default";
83	pinctrl-0 = <&pinctrl_espi2>;
84	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
85	status = "okay";
86
87	eeprom@0 {
88		compatible = "microchip,at25160bn", "atmel,at25";
89		reg = <0>;
90		spi-max-frequency = <5000000>;
91		spi-cpha;
92		spi-cpol;
93		pagesize = <32>;
94		size = <2048>;
95		address-width = <16>;
96	};
97};
98
99&i2c4 {
100	clock-frequency = <400000>;
101	pinctrl-names = "default";
102	pinctrl-0 = <&pinctrl_i2c4>;
103	status = "okay";
104
105	pca6416_0: gpio@20 {
106		compatible = "nxp,pcal6416";
107		reg = <0x20>;
108		pinctrl-names = "default";
109		pinctrl-0 = <&pinctrl_pcal6414>;
110		gpio-controller;
111		#gpio-cells = <2>;
112		interrupt-parent = <&gpio4>;
113		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
114	};
115
116	pca6416_1: gpio@21 {
117		compatible = "nxp,pcal6416";
118		reg = <0x21>;
119		gpio-controller;
120		#gpio-cells = <2>;
121		interrupt-parent = <&gpio4>;
122		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
123	};
124
125	wm8962: audio-codec@1a {
126		compatible = "wlf,wm8962";
127		reg = <0x1a>;
128		clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
129		DCVDD-supply = <&reg_audio>;
130		DBVDD-supply = <&reg_audio>;
131		AVDD-supply = <&reg_audio>;
132		CPVDD-supply = <&reg_audio>;
133		MICVDD-supply = <&reg_audio>;
134		PLLVDD-supply = <&reg_audio>;
135		SPKVDD1-supply = <&reg_audio>;
136		SPKVDD2-supply = <&reg_audio>;
137		gpio-cfg = <
138			0x0000 /* 0:Default */
139			0x0000 /* 1:Default */
140			0x0000 /* 2:FN_DMICCLK */
141			0x0000 /* 3:Default */
142			0x0000 /* 4:FN_DMICCDAT */
143			0x0000 /* 5:Default */
144		>;
145	};
146};
147
148&easrc {
149	fsl,asrc-rate = <48000>;
150	status = "okay";
151};
152
153&sai3 {
154	pinctrl-names = "default";
155	pinctrl-0 = <&pinctrl_sai3>;
156	assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
157	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
158	assigned-clock-rates = <24576000>;
159	fsl,sai-mclk-direction-output;
160	status = "okay";
161};
162
163&snvs_pwrkey {
164	status = "okay";
165};
166
167&uart2 { /* console */
168	pinctrl-names = "default";
169	pinctrl-0 = <&pinctrl_uart2>;
170	status = "okay";
171};
172
173&uart3 {
174	pinctrl-names = "default";
175	pinctrl-0 = <&pinctrl_uart3>;
176	assigned-clocks = <&clk IMX8MN_CLK_UART3>;
177	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
178	uart-has-rtscts;
179	status = "okay";
180};
181
182&usbotg1 {
183	vbus-supply = <&reg_usb_otg_vbus>;
184	disable-over-current;
185	dr_mode = "otg";
186	status = "okay";
187};
188
189&usdhc2 {
190	pinctrl-names = "default", "state_100mhz", "state_200mhz";
191	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
192	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
193	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
194	bus-width = <4>;
195	vmmc-supply = <&reg_usdhc2_vmmc>;
196	status = "okay";
197};
198
199&iomuxc {
200	pinctrl_espi2: espi2grp {
201		fsl,pins = <
202			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
203			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
204			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
205			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x41
206		>;
207	};
208
209	pinctrl_i2c2: i2c2grp {
210		fsl,pins = <
211			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
212			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
213		>;
214	};
215
216	pinctrl_i2c4: i2c4grp {
217		fsl,pins = <
218			MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
219			MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
220		>;
221	};
222
223	pinctrl_led3: led3grp {
224		fsl,pins = <
225			MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x41
226		>;
227	};
228
229	pinctrl_pcal6414: pcal6414-gpiogrp {
230		fsl,pins = <
231			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x19
232		>;
233	};
234
235	pinctrl_reg_usb_otg: reg-otggrp {
236		fsl,pins = <
237			MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29     0x19
238		>;
239	};
240
241	pinctrl_sai3: sai3grp {
242		fsl,pins = <
243			MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
244			MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
245			MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
246			MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
247			MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
248		>;
249	};
250
251	pinctrl_uart2: uart2grp {
252		fsl,pins = <
253			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
254			MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
255		>;
256	};
257
258	pinctrl_uart3: uart3grp {
259		fsl,pins = <
260			MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX	0x40
261			MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX	0x40
262			MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x40
263			MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B	0x40
264		>;
265	};
266
267	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
268		fsl,pins = <
269			MX8MN_IOMUXC_SD2_CD_B_USDHC2_CD_B	0x41
270			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
271		>;
272	};
273
274	pinctrl_usdhc2: usdhc2grp {
275		fsl,pins = <
276			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK	0x190
277			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d0
278			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
279			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
280			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
281			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
282			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
283		>;
284	};
285
286	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
287		fsl,pins = <
288			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK	0x194
289			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d4
290			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
291			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
292			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
293			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
294			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
295		>;
296	};
297
298	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
299		fsl,pins = <
300			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK	0x196
301			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d6
302			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
303			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
304			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
305			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
306			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
307		>;
308	};
309};
310