1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright 2022 NXP 4 */ 5 6#include <dt-bindings/clock/imx93-clock.h> 7#include <dt-bindings/gpio/gpio.h> 8#include <dt-bindings/input/input.h> 9#include <dt-bindings/interrupt-controller/arm-gic.h> 10#include <dt-bindings/power/fsl,imx93-power.h> 11 12#include "imx93-pinfunc.h" 13 14/ { 15 interrupt-parent = <&gic>; 16 #address-cells = <2>; 17 #size-cells = <2>; 18 19 aliases { 20 gpio0 = &gpio1; 21 gpio1 = &gpio2; 22 gpio2 = &gpio3; 23 gpio3 = &gpio4; 24 i2c0 = &lpi2c1; 25 i2c1 = &lpi2c2; 26 i2c2 = &lpi2c3; 27 i2c3 = &lpi2c4; 28 i2c4 = &lpi2c5; 29 i2c5 = &lpi2c6; 30 i2c6 = &lpi2c7; 31 i2c7 = &lpi2c8; 32 mmc0 = &usdhc1; 33 mmc1 = &usdhc2; 34 mmc2 = &usdhc3; 35 serial0 = &lpuart1; 36 serial1 = &lpuart2; 37 serial2 = &lpuart3; 38 serial3 = &lpuart4; 39 serial4 = &lpuart5; 40 serial5 = &lpuart6; 41 serial6 = &lpuart7; 42 serial7 = &lpuart8; 43 }; 44 45 cpus { 46 #address-cells = <1>; 47 #size-cells = <0>; 48 49 idle-states { 50 entry-method = "psci"; 51 52 cpu_pd_wait: cpu-pd-wait { 53 compatible = "arm,idle-state"; 54 arm,psci-suspend-param = <0x0010033>; 55 local-timer-stop; 56 entry-latency-us = <10000>; 57 exit-latency-us = <7000>; 58 min-residency-us = <27000>; 59 wakeup-latency-us = <15000>; 60 }; 61 }; 62 63 A55_0: cpu@0 { 64 device_type = "cpu"; 65 compatible = "arm,cortex-a55"; 66 reg = <0x0>; 67 enable-method = "psci"; 68 #cooling-cells = <2>; 69 cpu-idle-states = <&cpu_pd_wait>; 70 }; 71 72 A55_1: cpu@100 { 73 device_type = "cpu"; 74 compatible = "arm,cortex-a55"; 75 reg = <0x100>; 76 enable-method = "psci"; 77 #cooling-cells = <2>; 78 cpu-idle-states = <&cpu_pd_wait>; 79 }; 80 81 }; 82 83 osc_32k: clock-osc-32k { 84 compatible = "fixed-clock"; 85 #clock-cells = <0>; 86 clock-frequency = <32768>; 87 clock-output-names = "osc_32k"; 88 }; 89 90 osc_24m: clock-osc-24m { 91 compatible = "fixed-clock"; 92 #clock-cells = <0>; 93 clock-frequency = <24000000>; 94 clock-output-names = "osc_24m"; 95 }; 96 97 clk_ext1: clock-ext1 { 98 compatible = "fixed-clock"; 99 #clock-cells = <0>; 100 clock-frequency = <133000000>; 101 clock-output-names = "clk_ext1"; 102 }; 103 104 pmu { 105 compatible = "arm,cortex-a55-pmu"; 106 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; 107 }; 108 109 psci { 110 compatible = "arm,psci-1.0"; 111 method = "smc"; 112 }; 113 114 timer { 115 compatible = "arm,armv8-timer"; 116 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, 117 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, 118 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, 119 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; 120 clock-frequency = <24000000>; 121 arm,no-tick-in-suspend; 122 interrupt-parent = <&gic>; 123 }; 124 125 gic: interrupt-controller@48000000 { 126 compatible = "arm,gic-v3"; 127 reg = <0 0x48000000 0 0x10000>, 128 <0 0x48040000 0 0xc0000>; 129 #interrupt-cells = <3>; 130 interrupt-controller; 131 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; 132 interrupt-parent = <&gic>; 133 }; 134 135 soc@0 { 136 compatible = "simple-bus"; 137 #address-cells = <1>; 138 #size-cells = <1>; 139 ranges = <0x0 0x0 0x0 0x80000000>, 140 <0x28000000 0x0 0x28000000 0x10000000>; 141 142 aips1: bus@44000000 { 143 compatible = "fsl,aips-bus", "simple-bus"; 144 reg = <0x44000000 0x800000>; 145 #address-cells = <1>; 146 #size-cells = <1>; 147 ranges; 148 149 anomix_ns_gpr: syscon@44210000 { 150 compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon"; 151 reg = <0x44210000 0x1000>; 152 }; 153 154 mu1: mailbox@44230000 { 155 compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; 156 reg = <0x44230000 0x10000>; 157 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; 158 clocks = <&clk IMX93_CLK_MU1_B_GATE>; 159 #mbox-cells = <2>; 160 status = "disabled"; 161 }; 162 163 system_counter: timer@44290000 { 164 compatible = "nxp,sysctr-timer"; 165 reg = <0x44290000 0x30000>; 166 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; 167 clocks = <&osc_24m>; 168 clock-names = "per"; 169 nxp,no-divider; 170 }; 171 172 wdog1: watchdog@442d0000 { 173 compatible = "fsl,imx93-wdt"; 174 reg = <0x442d0000 0x10000>; 175 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; 176 clocks = <&clk IMX93_CLK_WDOG1_GATE>; 177 timeout-sec = <40>; 178 status = "disabled"; 179 }; 180 181 wdog2: watchdog@442e0000 { 182 compatible = "fsl,imx93-wdt"; 183 reg = <0x442e0000 0x10000>; 184 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; 185 clocks = <&clk IMX93_CLK_WDOG2_GATE>; 186 timeout-sec = <40>; 187 status = "disabled"; 188 }; 189 190 tpm1: pwm@44310000 { 191 compatible = "fsl,imx7ulp-pwm"; 192 reg = <0x44310000 0x1000>; 193 clocks = <&clk IMX93_CLK_TPM1_GATE>; 194 #pwm-cells = <3>; 195 status = "disabled"; 196 }; 197 198 tpm2: pwm@44320000 { 199 compatible = "fsl,imx7ulp-pwm"; 200 reg = <0x44320000 0x10000>; 201 clocks = <&clk IMX93_CLK_TPM2_GATE>; 202 #pwm-cells = <3>; 203 status = "disabled"; 204 }; 205 206 lpi2c1: i2c@44340000 { 207 compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; 208 reg = <0x44340000 0x10000>; 209 #address-cells = <1>; 210 #size-cells = <0>; 211 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 212 clocks = <&clk IMX93_CLK_LPI2C1_GATE>, 213 <&clk IMX93_CLK_BUS_AON>; 214 clock-names = "per", "ipg"; 215 status = "disabled"; 216 }; 217 218 lpi2c2: i2c@44350000 { 219 compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; 220 reg = <0x44350000 0x10000>; 221 #address-cells = <1>; 222 #size-cells = <0>; 223 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 224 clocks = <&clk IMX93_CLK_LPI2C2_GATE>, 225 <&clk IMX93_CLK_BUS_AON>; 226 clock-names = "per", "ipg"; 227 status = "disabled"; 228 }; 229 230 lpspi1: spi@44360000 { 231 #address-cells = <1>; 232 #size-cells = <0>; 233 compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; 234 reg = <0x44360000 0x10000>; 235 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; 236 clocks = <&clk IMX93_CLK_LPSPI1_GATE>, 237 <&clk IMX93_CLK_BUS_AON>; 238 clock-names = "per", "ipg"; 239 status = "disabled"; 240 }; 241 242 lpspi2: spi@44370000 { 243 #address-cells = <1>; 244 #size-cells = <0>; 245 compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; 246 reg = <0x44370000 0x10000>; 247 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; 248 clocks = <&clk IMX93_CLK_LPSPI2_GATE>, 249 <&clk IMX93_CLK_BUS_AON>; 250 clock-names = "per", "ipg"; 251 status = "disabled"; 252 }; 253 254 lpuart1: serial@44380000 { 255 compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; 256 reg = <0x44380000 0x1000>; 257 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; 258 clocks = <&clk IMX93_CLK_LPUART1_GATE>; 259 clock-names = "ipg"; 260 status = "disabled"; 261 }; 262 263 lpuart2: serial@44390000 { 264 compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; 265 reg = <0x44390000 0x1000>; 266 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; 267 clocks = <&clk IMX93_CLK_LPUART2_GATE>; 268 clock-names = "ipg"; 269 status = "disabled"; 270 }; 271 272 flexcan1: can@443a0000 { 273 compatible = "fsl,imx93-flexcan"; 274 reg = <0x443a0000 0x10000>; 275 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; 276 clocks = <&clk IMX93_CLK_BUS_AON>, 277 <&clk IMX93_CLK_CAN1_GATE>; 278 clock-names = "ipg", "per"; 279 assigned-clocks = <&clk IMX93_CLK_CAN1>; 280 assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; 281 assigned-clock-rates = <40000000>; 282 fsl,clk-source = /bits/ 8 <0>; 283 status = "disabled"; 284 }; 285 286 iomuxc: pinctrl@443c0000 { 287 compatible = "fsl,imx93-iomuxc"; 288 reg = <0x443c0000 0x10000>; 289 status = "okay"; 290 }; 291 292 bbnsm: bbnsm@44440000 { 293 compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd"; 294 reg = <0x44440000 0x10000>; 295 296 bbnsm_rtc: rtc { 297 compatible = "nxp,imx93-bbnsm-rtc"; 298 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; 299 }; 300 301 bbnsm_pwrkey: pwrkey { 302 compatible = "nxp,imx93-bbnsm-pwrkey"; 303 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; 304 linux,code = <KEY_POWER>; 305 }; 306 }; 307 308 clk: clock-controller@44450000 { 309 compatible = "fsl,imx93-ccm"; 310 reg = <0x44450000 0x10000>; 311 #clock-cells = <1>; 312 clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>; 313 clock-names = "osc_32k", "osc_24m", "clk_ext1"; 314 status = "okay"; 315 }; 316 317 src: system-controller@44460000 { 318 compatible = "fsl,imx93-src", "syscon"; 319 reg = <0x44460000 0x10000>; 320 #address-cells = <1>; 321 #size-cells = <1>; 322 ranges; 323 324 mlmix: power-domain@44461800 { 325 compatible = "fsl,imx93-src-slice"; 326 reg = <0x44461800 0x400>, <0x44464800 0x400>; 327 #power-domain-cells = <0>; 328 clocks = <&clk IMX93_CLK_ML_APB>, 329 <&clk IMX93_CLK_ML>; 330 }; 331 332 mediamix: power-domain@44462400 { 333 compatible = "fsl,imx93-src-slice"; 334 reg = <0x44462400 0x400>, <0x44465800 0x400>; 335 #power-domain-cells = <0>; 336 clocks = <&clk IMX93_CLK_MEDIA_AXI>, 337 <&clk IMX93_CLK_MEDIA_APB>; 338 }; 339 }; 340 341 anatop: anatop@44480000 { 342 compatible = "fsl,imx93-anatop", "syscon"; 343 reg = <0x44480000 0x2000>; 344 }; 345 346 adc1: adc@44530000 { 347 compatible = "nxp,imx93-adc"; 348 reg = <0x44530000 0x10000>; 349 interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, 350 <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, 351 <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, 352 <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; 353 clocks = <&clk IMX93_CLK_ADC1_GATE>; 354 clock-names = "ipg"; 355 #io-channel-cells = <1>; 356 status = "disabled"; 357 }; 358 }; 359 360 aips2: bus@42000000 { 361 compatible = "fsl,aips-bus", "simple-bus"; 362 reg = <0x42000000 0x800000>; 363 #address-cells = <1>; 364 #size-cells = <1>; 365 ranges; 366 367 wakeupmix_gpr: syscon@42420000 { 368 compatible = "fsl,imx93-wakeupmix-syscfg", "syscon"; 369 reg = <0x42420000 0x1000>; 370 }; 371 372 mu2: mailbox@42440000 { 373 compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; 374 reg = <0x42440000 0x10000>; 375 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; 376 clocks = <&clk IMX93_CLK_MU2_B_GATE>; 377 #mbox-cells = <2>; 378 status = "disabled"; 379 }; 380 381 wdog3: watchdog@42490000 { 382 compatible = "fsl,imx93-wdt"; 383 reg = <0x42490000 0x10000>; 384 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; 385 clocks = <&clk IMX93_CLK_WDOG3_GATE>; 386 timeout-sec = <40>; 387 status = "disabled"; 388 }; 389 390 wdog4: watchdog@424a0000 { 391 compatible = "fsl,imx93-wdt"; 392 reg = <0x424a0000 0x10000>; 393 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; 394 clocks = <&clk IMX93_CLK_WDOG4_GATE>; 395 timeout-sec = <40>; 396 status = "disabled"; 397 }; 398 399 wdog5: watchdog@424b0000 { 400 compatible = "fsl,imx93-wdt"; 401 reg = <0x424b0000 0x10000>; 402 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; 403 clocks = <&clk IMX93_CLK_WDOG5_GATE>; 404 timeout-sec = <40>; 405 status = "disabled"; 406 }; 407 408 tpm3: pwm@424e0000 { 409 compatible = "fsl,imx7ulp-pwm"; 410 reg = <0x424e0000 0x1000>; 411 clocks = <&clk IMX93_CLK_TPM3_GATE>; 412 #pwm-cells = <3>; 413 status = "disabled"; 414 }; 415 416 tpm4: pwm@424f0000 { 417 compatible = "fsl,imx7ulp-pwm"; 418 reg = <0x424f0000 0x10000>; 419 clocks = <&clk IMX93_CLK_TPM4_GATE>; 420 #pwm-cells = <3>; 421 status = "disabled"; 422 }; 423 424 tpm5: pwm@42500000 { 425 compatible = "fsl,imx7ulp-pwm"; 426 reg = <0x42500000 0x10000>; 427 clocks = <&clk IMX93_CLK_TPM5_GATE>; 428 #pwm-cells = <3>; 429 status = "disabled"; 430 }; 431 432 tpm6: pwm@42510000 { 433 compatible = "fsl,imx7ulp-pwm"; 434 reg = <0x42510000 0x10000>; 435 clocks = <&clk IMX93_CLK_TPM6_GATE>; 436 #pwm-cells = <3>; 437 status = "disabled"; 438 }; 439 440 lpi2c3: i2c@42530000 { 441 compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; 442 reg = <0x42530000 0x10000>; 443 #address-cells = <1>; 444 #size-cells = <0>; 445 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; 446 clocks = <&clk IMX93_CLK_LPI2C3_GATE>, 447 <&clk IMX93_CLK_BUS_WAKEUP>; 448 clock-names = "per", "ipg"; 449 status = "disabled"; 450 }; 451 452 lpi2c4: i2c@42540000 { 453 compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; 454 reg = <0x42540000 0x10000>; 455 #address-cells = <1>; 456 #size-cells = <0>; 457 interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; 458 clocks = <&clk IMX93_CLK_LPI2C4_GATE>, 459 <&clk IMX93_CLK_BUS_WAKEUP>; 460 clock-names = "per", "ipg"; 461 status = "disabled"; 462 }; 463 464 lpspi3: spi@42550000 { 465 #address-cells = <1>; 466 #size-cells = <0>; 467 compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; 468 reg = <0x42550000 0x10000>; 469 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; 470 clocks = <&clk IMX93_CLK_LPSPI3_GATE>, 471 <&clk IMX93_CLK_BUS_WAKEUP>; 472 clock-names = "per", "ipg"; 473 status = "disabled"; 474 }; 475 476 lpspi4: spi@42560000 { 477 #address-cells = <1>; 478 #size-cells = <0>; 479 compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; 480 reg = <0x42560000 0x10000>; 481 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; 482 clocks = <&clk IMX93_CLK_LPSPI4_GATE>, 483 <&clk IMX93_CLK_BUS_WAKEUP>; 484 clock-names = "per", "ipg"; 485 status = "disabled"; 486 }; 487 488 lpuart3: serial@42570000 { 489 compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; 490 reg = <0x42570000 0x1000>; 491 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; 492 clocks = <&clk IMX93_CLK_LPUART3_GATE>; 493 clock-names = "ipg"; 494 status = "disabled"; 495 }; 496 497 lpuart4: serial@42580000 { 498 compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; 499 reg = <0x42580000 0x1000>; 500 interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; 501 clocks = <&clk IMX93_CLK_LPUART4_GATE>; 502 clock-names = "ipg"; 503 status = "disabled"; 504 }; 505 506 lpuart5: serial@42590000 { 507 compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; 508 reg = <0x42590000 0x1000>; 509 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; 510 clocks = <&clk IMX93_CLK_LPUART5_GATE>; 511 clock-names = "ipg"; 512 status = "disabled"; 513 }; 514 515 lpuart6: serial@425a0000 { 516 compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; 517 reg = <0x425a0000 0x1000>; 518 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; 519 clocks = <&clk IMX93_CLK_LPUART6_GATE>; 520 clock-names = "ipg"; 521 status = "disabled"; 522 }; 523 524 flexcan2: can@425b0000 { 525 compatible = "fsl,imx93-flexcan"; 526 reg = <0x425b0000 0x10000>; 527 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; 528 clocks = <&clk IMX93_CLK_BUS_WAKEUP>, 529 <&clk IMX93_CLK_CAN2_GATE>; 530 clock-names = "ipg", "per"; 531 assigned-clocks = <&clk IMX93_CLK_CAN2>; 532 assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; 533 assigned-clock-rates = <40000000>; 534 fsl,clk-source = /bits/ 8 <0>; 535 status = "disabled"; 536 }; 537 538 flexspi1: spi@425e0000 { 539 compatible = "nxp,imx8mm-fspi"; 540 reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>; 541 reg-names = "fspi_base", "fspi_mmap"; 542 #address-cells = <1>; 543 #size-cells = <0>; 544 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; 545 clocks = <&clk IMX93_CLK_FLEXSPI1_GATE>, 546 <&clk IMX93_CLK_FLEXSPI1_GATE>; 547 clock-names = "fspi_en", "fspi"; 548 assigned-clocks = <&clk IMX93_CLK_FLEXSPI1>; 549 assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>; 550 status = "disabled"; 551 }; 552 553 lpuart7: serial@42690000 { 554 compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; 555 reg = <0x42690000 0x1000>; 556 interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>; 557 clocks = <&clk IMX93_CLK_LPUART7_GATE>; 558 clock-names = "ipg"; 559 status = "disabled"; 560 }; 561 562 lpuart8: serial@426a0000 { 563 compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; 564 reg = <0x426a0000 0x1000>; 565 interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; 566 clocks = <&clk IMX93_CLK_LPUART8_GATE>; 567 clock-names = "ipg"; 568 status = "disabled"; 569 }; 570 571 lpi2c5: i2c@426b0000 { 572 compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; 573 reg = <0x426b0000 0x10000>; 574 #address-cells = <1>; 575 #size-cells = <0>; 576 interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; 577 clocks = <&clk IMX93_CLK_LPI2C5_GATE>, 578 <&clk IMX93_CLK_BUS_WAKEUP>; 579 clock-names = "per", "ipg"; 580 status = "disabled"; 581 }; 582 583 lpi2c6: i2c@426c0000 { 584 compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; 585 reg = <0x426c0000 0x10000>; 586 #address-cells = <1>; 587 #size-cells = <0>; 588 interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; 589 clocks = <&clk IMX93_CLK_LPI2C6_GATE>, 590 <&clk IMX93_CLK_BUS_WAKEUP>; 591 clock-names = "per", "ipg"; 592 status = "disabled"; 593 }; 594 595 lpi2c7: i2c@426d0000 { 596 compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; 597 reg = <0x426d0000 0x10000>; 598 #address-cells = <1>; 599 #size-cells = <0>; 600 interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; 601 clocks = <&clk IMX93_CLK_LPI2C7_GATE>, 602 <&clk IMX93_CLK_BUS_WAKEUP>; 603 clock-names = "per", "ipg"; 604 status = "disabled"; 605 }; 606 607 lpi2c8: i2c@426e0000 { 608 compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; 609 reg = <0x426e0000 0x10000>; 610 #address-cells = <1>; 611 #size-cells = <0>; 612 interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; 613 clocks = <&clk IMX93_CLK_LPI2C8_GATE>, 614 <&clk IMX93_CLK_BUS_WAKEUP>; 615 clock-names = "per", "ipg"; 616 status = "disabled"; 617 }; 618 619 lpspi5: spi@426f0000 { 620 #address-cells = <1>; 621 #size-cells = <0>; 622 compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; 623 reg = <0x426f0000 0x10000>; 624 interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; 625 clocks = <&clk IMX93_CLK_LPSPI5_GATE>, 626 <&clk IMX93_CLK_BUS_WAKEUP>; 627 clock-names = "per", "ipg"; 628 status = "disabled"; 629 }; 630 631 lpspi6: spi@42700000 { 632 #address-cells = <1>; 633 #size-cells = <0>; 634 compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; 635 reg = <0x42700000 0x10000>; 636 interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; 637 clocks = <&clk IMX93_CLK_LPSPI6_GATE>, 638 <&clk IMX93_CLK_BUS_WAKEUP>; 639 clock-names = "per", "ipg"; 640 status = "disabled"; 641 }; 642 643 lpspi7: spi@42710000 { 644 #address-cells = <1>; 645 #size-cells = <0>; 646 compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; 647 reg = <0x42710000 0x10000>; 648 interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; 649 clocks = <&clk IMX93_CLK_LPSPI7_GATE>, 650 <&clk IMX93_CLK_BUS_WAKEUP>; 651 clock-names = "per", "ipg"; 652 status = "disabled"; 653 }; 654 655 lpspi8: spi@42720000 { 656 #address-cells = <1>; 657 #size-cells = <0>; 658 compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; 659 reg = <0x42720000 0x10000>; 660 interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; 661 clocks = <&clk IMX93_CLK_LPSPI8_GATE>, 662 <&clk IMX93_CLK_BUS_WAKEUP>; 663 clock-names = "per", "ipg"; 664 status = "disabled"; 665 }; 666 667 }; 668 669 aips3: bus@42800000 { 670 compatible = "fsl,aips-bus", "simple-bus"; 671 reg = <0x42800000 0x800000>; 672 #address-cells = <1>; 673 #size-cells = <1>; 674 ranges; 675 676 usdhc1: mmc@42850000 { 677 compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; 678 reg = <0x42850000 0x10000>; 679 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; 680 clocks = <&clk IMX93_CLK_BUS_WAKEUP>, 681 <&clk IMX93_CLK_WAKEUP_AXI>, 682 <&clk IMX93_CLK_USDHC1_GATE>; 683 clock-names = "ipg", "ahb", "per"; 684 bus-width = <8>; 685 fsl,tuning-start-tap = <20>; 686 fsl,tuning-step= <2>; 687 status = "disabled"; 688 }; 689 690 usdhc2: mmc@42860000 { 691 compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; 692 reg = <0x42860000 0x10000>; 693 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; 694 clocks = <&clk IMX93_CLK_BUS_WAKEUP>, 695 <&clk IMX93_CLK_WAKEUP_AXI>, 696 <&clk IMX93_CLK_USDHC2_GATE>; 697 clock-names = "ipg", "ahb", "per"; 698 bus-width = <4>; 699 fsl,tuning-start-tap = <20>; 700 fsl,tuning-step= <2>; 701 status = "disabled"; 702 }; 703 704 fec: ethernet@42890000 { 705 compatible = "fsl,imx93-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec"; 706 reg = <0x42890000 0x10000>; 707 interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, 708 <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, 709 <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, 710 <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; 711 clocks = <&clk IMX93_CLK_ENET1_GATE>, 712 <&clk IMX93_CLK_ENET1_GATE>, 713 <&clk IMX93_CLK_ENET_TIMER1>, 714 <&clk IMX93_CLK_ENET_REF>, 715 <&clk IMX93_CLK_ENET_REF_PHY>; 716 clock-names = "ipg", "ahb", "ptp", 717 "enet_clk_ref", "enet_out"; 718 assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>, 719 <&clk IMX93_CLK_ENET_REF>, 720 <&clk IMX93_CLK_ENET_REF_PHY>; 721 assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, 722 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>, 723 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; 724 assigned-clock-rates = <100000000>, <250000000>, <50000000>; 725 fsl,num-tx-queues = <3>; 726 fsl,num-rx-queues = <3>; 727 fsl,stop-mode = <&wakeupmix_gpr 0x0c 1>; 728 status = "disabled"; 729 }; 730 731 eqos: ethernet@428a0000 { 732 compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a"; 733 reg = <0x428a0000 0x10000>; 734 interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, 735 <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; 736 interrupt-names = "macirq", "eth_wake_irq"; 737 clocks = <&clk IMX93_CLK_ENET_QOS_GATE>, 738 <&clk IMX93_CLK_ENET_QOS_GATE>, 739 <&clk IMX93_CLK_ENET_TIMER2>, 740 <&clk IMX93_CLK_ENET>, 741 <&clk IMX93_CLK_ENET_QOS_GATE>; 742 clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem"; 743 assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>, 744 <&clk IMX93_CLK_ENET>; 745 assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, 746 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>; 747 assigned-clock-rates = <100000000>, <250000000>; 748 intf_mode = <&wakeupmix_gpr 0x28>; 749 snps,clk-csr = <0>; 750 status = "disabled"; 751 }; 752 753 usdhc3: mmc@428b0000 { 754 compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; 755 reg = <0x428b0000 0x10000>; 756 interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; 757 clocks = <&clk IMX93_CLK_BUS_WAKEUP>, 758 <&clk IMX93_CLK_WAKEUP_AXI>, 759 <&clk IMX93_CLK_USDHC3_GATE>; 760 clock-names = "ipg", "ahb", "per"; 761 bus-width = <4>; 762 fsl,tuning-start-tap = <20>; 763 fsl,tuning-step= <2>; 764 status = "disabled"; 765 }; 766 }; 767 768 gpio2: gpio@43810080 { 769 compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; 770 reg = <0x43810080 0x1000>, <0x43810040 0x40>; 771 gpio-controller; 772 #gpio-cells = <2>; 773 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; 774 interrupt-controller; 775 #interrupt-cells = <2>; 776 clocks = <&clk IMX93_CLK_GPIO2_GATE>, 777 <&clk IMX93_CLK_GPIO2_GATE>; 778 clock-names = "gpio", "port"; 779 gpio-ranges = <&iomuxc 0 4 30>; 780 }; 781 782 gpio3: gpio@43820080 { 783 compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; 784 reg = <0x43820080 0x1000>, <0x43820040 0x40>; 785 gpio-controller; 786 #gpio-cells = <2>; 787 interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; 788 interrupt-controller; 789 #interrupt-cells = <2>; 790 clocks = <&clk IMX93_CLK_GPIO3_GATE>, 791 <&clk IMX93_CLK_GPIO3_GATE>; 792 clock-names = "gpio", "port"; 793 gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>, 794 <&iomuxc 26 34 2>, <&iomuxc 28 0 4>; 795 }; 796 797 gpio4: gpio@43830080 { 798 compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; 799 reg = <0x43830080 0x1000>, <0x43830040 0x40>; 800 gpio-controller; 801 #gpio-cells = <2>; 802 interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; 803 interrupt-controller; 804 #interrupt-cells = <2>; 805 clocks = <&clk IMX93_CLK_GPIO4_GATE>, 806 <&clk IMX93_CLK_GPIO4_GATE>; 807 clock-names = "gpio", "port"; 808 gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>; 809 }; 810 811 gpio1: gpio@47400080 { 812 compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; 813 reg = <0x47400080 0x1000>, <0x47400040 0x40>; 814 gpio-controller; 815 #gpio-cells = <2>; 816 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 817 interrupt-controller; 818 #interrupt-cells = <2>; 819 clocks = <&clk IMX93_CLK_GPIO1_GATE>, 820 <&clk IMX93_CLK_GPIO1_GATE>; 821 clock-names = "gpio", "port"; 822 gpio-ranges = <&iomuxc 0 92 16>; 823 }; 824 825 ocotp: efuse@47510000 { 826 compatible = "fsl,imx93-ocotp", "syscon"; 827 reg = <0x47510000 0x10000>; 828 #address-cells = <1>; 829 #size-cells = <1>; 830 }; 831 832 s4muap: mailbox@47520000 { 833 compatible = "fsl,imx93-mu-s4"; 834 reg = <0x47520000 0x10000>; 835 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, 836 <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; 837 interrupt-names = "tx", "rx"; 838 #mbox-cells = <2>; 839 }; 840 841 media_blk_ctrl: system-controller@4ac10000 { 842 compatible = "fsl,imx93-media-blk-ctrl", "syscon"; 843 reg = <0x4ac10000 0x10000>; 844 power-domains = <&mediamix>; 845 clocks = <&clk IMX93_CLK_MEDIA_APB>, 846 <&clk IMX93_CLK_MEDIA_AXI>, 847 <&clk IMX93_CLK_NIC_MEDIA_GATE>, 848 <&clk IMX93_CLK_MEDIA_DISP_PIX>, 849 <&clk IMX93_CLK_CAM_PIX>, 850 <&clk IMX93_CLK_PXP_GATE>, 851 <&clk IMX93_CLK_LCDIF_GATE>, 852 <&clk IMX93_CLK_ISI_GATE>, 853 <&clk IMX93_CLK_MIPI_CSI_GATE>, 854 <&clk IMX93_CLK_MIPI_DSI_GATE>; 855 clock-names = "apb", "axi", "nic", "disp", "cam", 856 "pxp", "lcdif", "isi", "csi", "dsi"; 857 #power-domain-cells = <1>; 858 status = "disabled"; 859 }; 860 861 ddr-pmu@4e300dc0 { 862 compatible = "fsl,imx93-ddr-pmu"; 863 reg = <0x4e300dc0 0x200>; 864 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; 865 }; 866 }; 867}; 868