1// SPDX-License-Identifier: GPL-2.0-only
2
3/dts-v1/;
4
5#include "msm8916-pm8916.dtsi"
6
7#include <dt-bindings/gpio/gpio.h>
8#include <dt-bindings/input/input.h>
9#include <dt-bindings/leds/common.h>
10
11/ {
12	model = "GPLUS FL8005A";
13	compatible = "gplus,fl8005a", "qcom,msm8916";
14	chassis-type = "tablet";
15
16	aliases {
17		serial0 = &blsp1_uart2;
18	};
19
20	chosen {
21		stdout-path = "serial0";
22	};
23
24	flash-led-controller {
25		/* Actually qcom,leds-gpio-flash */
26		compatible = "sgmicro,sgm3140";
27		enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>;
28		flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
29
30		pinctrl-0 = <&camera_flash_default>;
31		pinctrl-names = "default";
32
33		flash_led: led {
34			function = LED_FUNCTION_FLASH;
35			color = <LED_COLOR_ID_WHITE>;
36			flash-max-timeout-us = <250000>;
37		};
38	};
39
40	gpio-keys {
41		compatible = "gpio-keys";
42
43		pinctrl-0 = <&gpio_keys_default>;
44		pinctrl-names = "default";
45
46		button-volume-up {
47			label = "Volume Up";
48			gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
49			linux,code = <KEY_VOLUMEUP>;
50		};
51	};
52
53	gpio-leds {
54		compatible = "gpio-leds";
55
56		pinctrl-0 = <&gpio_leds_default>;
57		pinctrl-names = "default";
58
59		led-red {
60			function = LED_FUNCTION_CHARGING;
61			color = <LED_COLOR_ID_RED>;
62			gpios = <&msmgpio 117 GPIO_ACTIVE_HIGH>;
63			retain-state-suspended;
64		};
65
66		led-green {
67			function = LED_FUNCTION_CHARGING;
68			color = <LED_COLOR_ID_GREEN>;
69			gpios = <&msmgpio 118 GPIO_ACTIVE_HIGH>;
70			retain-state-suspended;
71		};
72	};
73
74	usb_id: usb-id {
75		compatible = "linux,extcon-usb-gpio";
76		id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
77		pinctrl-0 = <&usb_id_default>;
78		pinctrl-names = "default";
79	};
80};
81
82&blsp_i2c5 {
83	status = "okay";
84
85	touchscreen@38 {
86		/* Actually ft5402 */
87		compatible = "edt,edt-ft5406";
88		reg = <0x38>;
89
90		interrupt-parent = <&msmgpio>;
91		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
92
93		reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>;
94
95		vcc-supply = <&pm8916_l17>;
96		iovcc-supply = <&pm8916_l6>;
97
98		touchscreen-size-x = <800>;
99		touchscreen-size-y = <500>;
100		touchscreen-inverted-x;
101		touchscreen-swapped-x-y;
102
103		pinctrl-0 = <&touchscreen_default>;
104		pinctrl-names = "default";
105	};
106};
107
108&blsp1_uart2 {
109	status = "okay";
110};
111
112&pm8916_resin {
113	linux,code = <KEY_VOLUMEDOWN>;
114	status = "okay";
115};
116
117&pm8916_vib {
118	status = "okay";
119};
120
121&sdhc_1 {
122	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
123	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
124	pinctrl-names = "default", "sleep";
125
126	status = "okay";
127};
128
129&sdhc_2 {
130	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
131	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
132	pinctrl-names = "default", "sleep";
133
134	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
135
136	status = "okay";
137};
138
139&usb {
140	extcon = <&usb_id>, <&usb_id>;
141	status = "okay";
142};
143
144&usb_hs_phy {
145	extcon = <&usb_id>;
146};
147
148&wcnss {
149	status = "okay";
150};
151
152&wcnss_iris {
153	compatible = "qcom,wcn3620";
154};
155
156&smd_rpm_regulators {
157	vdd_l1_l2_l3-supply = <&pm8916_s3>;
158	vdd_l4_l5_l6-supply = <&pm8916_s4>;
159	vdd_l7-supply = <&pm8916_s4>;
160
161	s3 {
162		regulator-min-microvolt = <1200000>;
163		regulator-max-microvolt = <1300000>;
164	};
165
166	s4 {
167		regulator-min-microvolt = <1800000>;
168		regulator-max-microvolt = <2100000>;
169	};
170
171	l1 {
172		regulator-min-microvolt = <1225000>;
173		regulator-max-microvolt = <1225000>;
174	};
175
176	l2 {
177		regulator-min-microvolt = <1200000>;
178		regulator-max-microvolt = <1200000>;
179	};
180
181	l4 {
182		regulator-min-microvolt = <2050000>;
183		regulator-max-microvolt = <2050000>;
184	};
185
186	l5 {
187		regulator-min-microvolt = <1800000>;
188		regulator-max-microvolt = <1800000>;
189	};
190
191	l6 {
192		regulator-min-microvolt = <1800000>;
193		regulator-max-microvolt = <1800000>;
194	};
195
196	l7 {
197		regulator-min-microvolt = <1800000>;
198		regulator-max-microvolt = <1800000>;
199	};
200
201	l8 {
202		regulator-min-microvolt = <2850000>;
203		regulator-max-microvolt = <2900000>;
204	};
205
206	l9 {
207		regulator-min-microvolt = <3300000>;
208		regulator-max-microvolt = <3300000>;
209	};
210
211	l10 {
212		regulator-min-microvolt = <2700000>;
213		regulator-max-microvolt = <2800000>;
214	};
215
216	l11 {
217		regulator-min-microvolt = <1800000>;
218		regulator-max-microvolt = <2950000>;
219		regulator-system-load = <200000>;
220		regulator-allow-set-load;
221	};
222
223	l12 {
224		regulator-min-microvolt = <1800000>;
225		regulator-max-microvolt = <2950000>;
226	};
227
228	l13 {
229		regulator-min-microvolt = <3075000>;
230		regulator-max-microvolt = <3075000>;
231	};
232
233	l14 {
234		regulator-min-microvolt = <1800000>;
235		regulator-max-microvolt = <3300000>;
236	};
237
238	l15 {
239		regulator-min-microvolt = <1800000>;
240		regulator-max-microvolt = <3300000>;
241	};
242
243	l16 {
244		regulator-min-microvolt = <1800000>;
245		regulator-max-microvolt = <3300000>;
246	};
247
248	l17 {
249		regulator-min-microvolt = <2850000>;
250		regulator-max-microvolt = <2850000>;
251	};
252
253	l18 {
254		regulator-min-microvolt = <2700000>;
255		regulator-max-microvolt = <2700000>;
256	};
257};
258
259&msmgpio {
260	camera_flash_default: camera-flash-default-state {
261		pins = "gpio31", "gpio32";
262		function = "gpio";
263		drive-strength = <2>;
264		bias-disable;
265	};
266
267	gpio_keys_default: gpio-keys-default-state {
268		pins = "gpio107";
269		function = "gpio";
270		drive-strength = <2>;
271		bias-pull-up;
272	};
273
274	gpio_leds_default: gpio-led-default-state {
275		pins = "gpio117", "gpio118";
276		function = "gpio";
277		drive-strength = <2>;
278		bias-disable;
279	};
280
281	touchscreen_default: touchscreen-default-state {
282		reset-pins {
283			pins = "gpio12";
284			function = "gpio";
285			drive-strength = <2>;
286			bias-disable;
287		};
288
289		touchscreen-pins {
290			pins = "gpio13";
291			function = "gpio";
292			drive-strength = <2>;
293			bias-pull-up;
294		};
295	};
296
297	usb_id_default: usb-id-default-state {
298		pins = "gpio110";
299		function = "gpio";
300		drive-strength = <8>;
301		bias-pull-up;
302	};
303};
304