1// SPDX-License-Identifier: GPL-2.0-only
2
3/dts-v1/;
4
5#include "msm8916-pm8916.dtsi"
6#include "msm8916-modem-qdsp6.dtsi"
7
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/input/input.h>
10#include <dt-bindings/leds/common.h>
11#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
12
13/ {
14	model = "BQ Aquaris X5 (Longcheer L8910)";
15	compatible = "longcheer,l8910", "qcom,msm8916";
16	chassis-type = "handset";
17
18	aliases {
19		mmc0 = &sdhc_1; /* eMMC */
20		mmc1 = &sdhc_2; /* SD card */
21		serial0 = &blsp_uart2;
22	};
23
24	chosen {
25		stdout-path = "serial0";
26	};
27
28	speaker_amp: audio-amplifier {
29		compatible = "awinic,aw8738";
30		mode-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
31		awinic,mode = <5>;
32		sound-name-prefix = "Speaker Amp";
33
34		pinctrl-0 = <&spk_ext_pa_default>;
35		pinctrl-names = "default";
36	};
37
38	flash-led-controller {
39		compatible = "ocs,ocp8110";
40		enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
41		flash-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>;
42
43		pinctrl-0 = <&camera_front_flash_default>;
44		pinctrl-names = "default";
45
46		flash_led: led {
47			function = LED_FUNCTION_FLASH;
48			color = <LED_COLOR_ID_WHITE>;
49			flash-max-timeout-us = <250000>;
50		};
51	};
52
53	gpio-keys {
54		compatible = "gpio-keys";
55
56		pinctrl-names = "default";
57		pinctrl-0 = <&gpio_keys_default>;
58
59		label = "GPIO Buttons";
60
61		button-volume-up {
62			label = "Volume Up";
63			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
64			linux,code = <KEY_VOLUMEUP>;
65		};
66	};
67
68	leds {
69		compatible = "gpio-leds";
70
71		led-0 {
72			gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
73			color = <LED_COLOR_ID_WHITE>;
74			default-state = "off";
75			function = LED_FUNCTION_KBD_BACKLIGHT;
76
77			pinctrl-names = "default";
78			pinctrl-0 = <&button_backlight_default>;
79		};
80	};
81
82	usb_id: usb-id {
83		compatible = "linux,extcon-usb-gpio";
84		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
85		pinctrl-names = "default";
86		pinctrl-0 = <&usb_id_default>;
87	};
88};
89
90&blsp_i2c2 {
91	status = "okay";
92
93	led-controller@30 {
94		compatible = "kinetic,ktd2026";
95		reg = <0x30>;
96		#address-cells = <1>;
97		#size-cells = <0>;
98
99		vin-supply = <&pm8916_l17>;
100		vio-supply = <&pm8916_l6>;
101
102		pinctrl-0 = <&status_led_default>;
103		pinctrl-names = "default";
104
105		multi-led {
106			color = <LED_COLOR_ID_RGB>;
107			function = LED_FUNCTION_STATUS;
108
109			#address-cells = <1>;
110			#size-cells = <0>;
111
112			led@0 {
113				reg = <0>;
114				color = <LED_COLOR_ID_RED>;
115			};
116
117			led@1 {
118				reg = <1>;
119				color = <LED_COLOR_ID_GREEN>;
120			};
121
122			led@2 {
123				reg = <2>;
124				color = <LED_COLOR_ID_BLUE>;
125			};
126		};
127	};
128};
129
130&blsp_i2c3 {
131	status = "okay";
132
133	magnetometer@d {
134		compatible = "asahi-kasei,ak09911";
135		reg = <0x0d>;
136
137		vdd-supply = <&pm8916_l17>;
138		vid-supply = <&pm8916_l6>;
139
140		reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>;
141
142		pinctrl-names = "default";
143		pinctrl-0 = <&mag_reset_default>;
144	};
145
146	imu@68 {
147		compatible = "bosch,bmi160";
148		reg = <0x68>;
149
150		vdd-supply = <&pm8916_l17>;
151		vddio-supply = <&pm8916_l6>;
152
153		mount-matrix = "0", "1", "0",
154			      "-1", "0", "0",
155			       "0", "0", "1";
156	};
157};
158
159&blsp_uart2 {
160	status = "okay";
161};
162
163&mpss_mem {
164	reg = <0x0 0x86800000 0x0 0x5000000>;
165};
166
167&pm8916_codec {
168	qcom,micbias-lvl = <2800>;
169	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
170	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
171	qcom,hphl-jack-type-normally-open;
172};
173
174&pm8916_gpios {
175	status_led_default: status-led-default-state {
176		pins = "gpio3";
177		function = PMIC_GPIO_FUNC_NORMAL;
178		power-source = <PM8916_GPIO_VPH>;
179		bias-disable;
180		output-high;
181	};
182};
183
184&pm8916_resin {
185	status = "okay";
186	linux,code = <KEY_VOLUMEDOWN>;
187};
188
189&pm8916_rpm_regulators {
190	pm8916_l17: l17 {
191		regulator-min-microvolt = <2850000>;
192		regulator-max-microvolt = <2850000>;
193	};
194};
195
196&pm8916_vib {
197	status = "okay";
198};
199
200&sdhc_1 {
201	status = "okay";
202};
203
204&sdhc_2 {
205	status = "okay";
206
207	pinctrl-names = "default", "sleep";
208	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
209	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
210
211	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
212};
213
214&sound {
215	/*
216	 * Provide widgets/pin-switches to allow enabling speaker separately.
217	 * The hardware does not provide a way to disable the output via the
218	 * headphone jack when the speaker is enabled.
219	 */
220	model = "bq-paella";
221	widgets =
222		"Speaker", "Speaker",
223		"Headphone", "Headphones";
224	pin-switches = "Speaker";
225	audio-routing =
226		"Speaker", "Speaker Amp OUT",
227		"Speaker Amp IN", "HPH_R",
228		"Headphones", "HPH_L",
229		"Headphones", "HPH_R",
230		"AMIC1", "MIC BIAS External1",
231		"AMIC2", "MIC BIAS Internal2",
232		"AMIC3", "MIC BIAS External1";
233	aux-devs = <&speaker_amp>;
234};
235
236&usb {
237	status = "okay";
238	extcon = <&usb_id>, <&usb_id>;
239};
240
241&usb_hs_phy {
242	extcon = <&usb_id>;
243};
244
245&venus {
246	status = "okay";
247};
248
249&venus_mem {
250	status = "okay";
251};
252
253&wcnss {
254	status = "okay";
255};
256
257&wcnss_iris {
258	compatible = "qcom,wcn3620";
259};
260
261&wcnss_mem {
262	status = "okay";
263};
264
265&tlmm {
266	button_backlight_default: button-backlight-default-state {
267		pins = "gpio17";
268		function = "gpio";
269
270		drive-strength = <2>;
271		bias-disable;
272	};
273
274	camera_front_flash_default: camera-front-flash-default-state {
275		pins = "gpio49", "gpio119";
276		function = "gpio";
277		drive-strength = <2>;
278		bias-disable;
279	};
280
281	gpio_keys_default: gpio-keys-default-state {
282		pins = "gpio107";
283		function = "gpio";
284
285		drive-strength = <2>;
286		bias-pull-up;
287	};
288
289	mag_reset_default: mag-reset-default-state {
290		pins = "gpio111";
291		function = "gpio";
292
293		drive-strength = <2>;
294		bias-disable;
295	};
296
297	sdc2_cd_default: sdc2-cd-default-state {
298		pins = "gpio38";
299		function = "gpio";
300		drive-strength = <2>;
301		bias-disable;
302	};
303
304	spk_ext_pa_default: spk-ext-pa-default-state {
305		pins = "gpio114";
306		function = "gpio";
307		drive-strength = <2>;
308		bias-disable;
309	};
310
311	usb_id_default: usb-id-default-state {
312		pins = "gpio110";
313		function = "gpio";
314
315		drive-strength = <8>;
316		bias-pull-up;
317	};
318};
319