1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2021, AngeloGioacchino Del Regno 4 * <angelogioacchino.delregno@somainline.org> 5 */ 6 7/dts-v1/; 8 9#include <dt-bindings/input/input.h> 10#include <dt-bindings/leds/common.h> 11#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 12#include "msm8998.dtsi" 13#include "pm8005.dtsi" 14#include "pm8998.dtsi" 15#include "pmi8998.dtsi" 16 17/ { 18 model = "F(x)tec Pro1 (QX1000)"; 19 compatible = "fxtec,pro1", "qcom,msm8998"; 20 chassis-type = "handset"; 21 qcom,board-id = <0x02000b 0x10>; 22 23 aliases { 24 serial0 = &blsp2_uart1; 25 serial1 = &blsp1_uart3; 26 }; 27 28 /* 29 * Until we hook up type-c detection, we 30 * have to stick with this. But it works. 31 */ 32 extcon_usb: extcon-usb { 33 compatible = "linux,extcon-usb-gpio"; 34 id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>; 35 }; 36 37 gpio-hall-sensors { 38 compatible = "gpio-keys"; 39 label = "Hall sensors"; 40 pinctrl-names = "default"; 41 pinctrl-0 = <&hall_sensor1_default>; 42 43 event-hall-sensor1 { 44 label = "Keyboard Hall Sensor"; 45 gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; 46 debounce-interval = <15>; 47 wakeup-source; 48 linux,input-type = <EV_SW>; 49 linux,code = <SW_KEYPAD_SLIDE>; 50 }; 51 }; 52 53 gpio-kb-extra-keys { 54 compatible = "gpio-keys"; 55 label = "Keyboard extra keys"; 56 pinctrl-names = "default"; 57 pinctrl-0 = <&gpio_kb_pins_extra>; 58 59 key-home { 60 label = "Home"; 61 gpios = <&tlmm 21 GPIO_ACTIVE_LOW>; 62 linux,code = <KEY_HOMEPAGE>; 63 debounce-interval = <15>; 64 linux,can-disable; 65 }; 66 67 key-super-l { 68 label = "Super Left"; 69 gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; 70 linux,code = <KEY_FN>; 71 debounce-interval = <15>; 72 linux,can-disable; 73 }; 74 75 key-super-r { 76 label = "Super Right"; 77 gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; 78 linux,code = <KEY_FN>; 79 debounce-interval = <15>; 80 linux,can-disable; 81 }; 82 83 key-shift { 84 label = "Shift"; 85 gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; 86 linux,code = <KEY_RIGHTSHIFT>; 87 debounce-interval = <15>; 88 linux,can-disable; 89 }; 90 91 key-ctrl { 92 label = "Ctrl"; 93 gpios = <&tlmm 128 GPIO_ACTIVE_LOW>; 94 linux,code = <KEY_LEFTCTRL>; 95 debounce-interval = <15>; 96 linux,can-disable; 97 }; 98 99 key-alt { 100 label = "Alt"; 101 gpios = <&tlmm 129 GPIO_ACTIVE_LOW>; 102 linux,code = <KEY_LEFTALT>; 103 debounce-interval = <15>; 104 linux,can-disable; 105 }; 106 }; 107 108 gpio-keys { 109 compatible = "gpio-keys"; 110 label = "Side buttons"; 111 pinctrl-names = "default"; 112 pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>, 113 <&cam_snapshot_pin_a>; 114 button-vol-up { 115 label = "Volume Up"; 116 gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; 117 linux,input-type = <EV_KEY>; 118 linux,code = <KEY_VOLUMEUP>; 119 wakeup-source; 120 debounce-interval = <15>; 121 }; 122 123 button-camera-snapshot { 124 label = "Camera Snapshot"; 125 gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>; 126 linux,input-type = <EV_KEY>; 127 linux,code = <KEY_CAMERA>; 128 debounce-interval = <15>; 129 }; 130 131 button-camera-focus { 132 label = "Camera Focus"; 133 gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>; 134 linux,input-type = <EV_KEY>; 135 linux,code = <KEY_CAMERA_FOCUS>; 136 debounce-interval = <15>; 137 }; 138 }; 139 140 keyboard-leds { 141 compatible = "gpio-leds"; 142 143 led-0 { 144 color = <LED_COLOR_ID_WHITE>; 145 default-state = "off"; 146 function = LED_FUNCTION_KBD_BACKLIGHT; 147 gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; 148 label = "white:kbd_backlight"; 149 retain-state-suspended; 150 }; 151 152 led-1 { 153 color = <LED_COLOR_ID_YELLOW>; 154 default-state = "off"; 155 function = LED_FUNCTION_CAPSLOCK; 156 gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; 157 label = "yellow:capslock"; 158 linux,default-trigger = "kbd-capslock"; 159 }; 160 }; 161 162 reserved-memory { 163 cont_splash_mem: memory@9d400000 { 164 reg = <0x0 0x9d400000 0x0 0x2000000>; 165 no-map; 166 }; 167 168 zap_shader_region: memory@f6400000 { 169 compatible = "shared-dma-pool"; 170 reg = <0x0 0xf6400000 0x0 0x2000>; 171 no-map; 172 }; 173 174 ramoops@ffc00000 { 175 compatible = "ramoops"; 176 reg = <0x0 0xffc00000 0x0 0x100000>; 177 console-size = <0x60000>; 178 ecc-size = <16>; 179 ftrace-size = <0x10000>; 180 pmsg-size = <0x20000>; 181 record-size = <0x10000>; 182 }; 183 }; 184 185 ts_vio_vreg: ts-vio-vreg { 186 compatible = "regulator-fixed"; 187 regulator-name = "ts_vio_reg"; 188 startup-delay-us = <2>; 189 enable-active-high; 190 gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; 191 pinctrl-names = "default"; 192 pinctrl-0 = <&ts_vio_default>; 193 regulator-always-on; 194 }; 195 196 vph_pwr: vph-pwr-regulator { 197 compatible = "regulator-fixed"; 198 regulator-name = "vph_pwr"; 199 regulator-always-on; 200 regulator-boot-on; 201 }; 202}; 203 204&blsp1_uart3 { 205 status = "okay"; 206 207 bluetooth { 208 compatible = "qcom,wcn3990-bt"; 209 210 vddio-supply = <&vreg_s4a_1p8>; 211 vddxo-supply = <&vreg_l7a_1p8>; 212 vddrf-supply = <&vreg_l17a_1p3>; 213 vddch0-supply = <&vreg_l25a_3p3>; 214 max-speed = <3200000>; 215 }; 216}; 217 218&blsp1_uart3_on { 219 rx-pins { 220 /delete-property/ bias-disable; 221 /* 222 * Configure a pull-up on 45 (RX). This is needed to 223 * avoid garbage data when the TX pin of the Bluetooth 224 * module is in tri-state (module powered off or not 225 * driving the signal yet). 226 */ 227 bias-pull-up; 228 }; 229 230 cts-pins { 231 /delete-property/ bias-disable; 232 /* 233 * Configure a pull-down on 47 (CTS) to match the pull 234 * of the Bluetooth module. 235 */ 236 bias-pull-down; 237 }; 238}; 239 240&blsp2_uart1 { 241 status = "okay"; 242}; 243 244&blsp2_i2c1 { 245 status = "okay"; 246 247 touchscreen@14 { 248 compatible = "goodix,gt9286"; 249 reg = <0x14>; 250 interrupt-parent = <&tlmm>; 251 interrupts = <125 IRQ_TYPE_LEVEL_LOW>; 252 reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; 253 AVDD28-supply = <&vreg_l28_3p0>; 254 VDDIO-supply = <&ts_vio_vreg>; 255 pinctrl-names = "active"; 256 pinctrl-0 = <&ts_rst_n>, <&ts_int_n>; 257 }; 258}; 259 260&etf { 261 status = "okay"; 262}; 263 264&etm1 { 265 status = "okay"; 266}; 267 268&etm2 { 269 status = "okay"; 270}; 271 272&etm3 { 273 status = "okay"; 274}; 275 276&etm4 { 277 status = "okay"; 278}; 279 280&etm5 { 281 status = "okay"; 282}; 283 284&etm6 { 285 status = "okay"; 286}; 287 288&etm7 { 289 status = "okay"; 290}; 291 292&etm8 { 293 status = "okay"; 294}; 295 296&etr { 297 status = "okay"; 298}; 299 300&funnel1 { 301 status = "okay"; 302}; 303 304&funnel2 { 305 status = "okay"; 306}; 307 308&funnel3 { 309 status = "okay"; 310}; 311 312&funnel4 { 313 /* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */ 314}; 315 316&funnel5 { 317 /* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */ 318}; 319 320&pcie0 { 321 status = "okay"; 322}; 323 324&pcie_phy { 325 status = "okay"; 326}; 327 328&pm8005_regulators { 329 vdd_s1-supply = <&vph_pwr>; 330 331 pm8005_s1: s1 { /* VDD_GFX supply */ 332 regulator-min-microvolt = <524000>; 333 regulator-max-microvolt = <1100000>; 334 regulator-enable-ramp-delay = <500>; 335 336 /* Hack until we rig up the gpu consumer */ 337 regulator-always-on; 338 }; 339}; 340 341&pm8998_gpios { 342 vol_up_pin_a: vol-up-active-state { 343 pins = "gpio6"; 344 function = "normal"; 345 bias-pull-up; 346 input-enable; 347 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; 348 }; 349 350 cam_focus_pin_a: cam-focus-btn-active-state { 351 pins = "gpio7"; 352 function = "normal"; 353 bias-pull-up; 354 input-enable; 355 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; 356 }; 357 358 cam_snapshot_pin_a: cam-snapshot-btn-active-state { 359 pins = "gpio8"; 360 function = "normal"; 361 bias-pull-up; 362 input-enable; 363 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; 364 }; 365}; 366 367&pm8998_resin { 368 linux,code = <KEY_VOLUMEDOWN>; 369 status = "okay"; 370}; 371 372&qusb2phy { 373 status = "okay"; 374 375 vdda-pll-supply = <&vreg_l12a_1p8>; 376 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; 377}; 378 379&replicator1 { 380 status = "okay"; 381}; 382 383&rpm_requests { 384 regulators-0 { 385 compatible = "qcom,rpm-pm8998-regulators"; 386 387 vdd_s1-supply = <&vph_pwr>; 388 vdd_s2-supply = <&vph_pwr>; 389 vdd_s3-supply = <&vph_pwr>; 390 vdd_s4-supply = <&vph_pwr>; 391 vdd_s5-supply = <&vph_pwr>; 392 vdd_s6-supply = <&vph_pwr>; 393 vdd_s7-supply = <&vph_pwr>; 394 vdd_s8-supply = <&vph_pwr>; 395 vdd_s9-supply = <&vph_pwr>; 396 vdd_s10-supply = <&vph_pwr>; 397 vdd_s11-supply = <&vph_pwr>; 398 vdd_s12-supply = <&vph_pwr>; 399 vdd_s13-supply = <&vph_pwr>; 400 vdd_l1_l27-supply = <&vreg_s7a_1p025>; 401 vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; 402 vdd_l3_l11-supply = <&vreg_s7a_1p025>; 403 vdd_l4_l5-supply = <&vreg_s7a_1p025>; 404 vdd_l6-supply = <&vreg_s5a_2p04>; 405 vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; 406 vdd_l9-supply = <&vreg_bob>; 407 vdd_l10_l23_l25-supply = <&vreg_bob>; 408 vdd_l13_l19_l21-supply = <&vreg_bob>; 409 vdd_l16_l28-supply = <&vreg_bob>; 410 vdd_l18_l22-supply = <&vreg_bob>; 411 vdd_l20_l24-supply = <&vreg_bob>; 412 vdd_l26-supply = <&vreg_s3a_1p35>; 413 vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; 414 415 vreg_s3a_1p35: s3 { 416 regulator-min-microvolt = <1352000>; 417 regulator-max-microvolt = <1352000>; 418 }; 419 420 vreg_s4a_1p8: s4 { 421 regulator-min-microvolt = <1800000>; 422 regulator-max-microvolt = <1800000>; 423 regulator-allow-set-load; 424 }; 425 426 vreg_s5a_2p04: s5 { 427 regulator-min-microvolt = <1904000>; 428 regulator-max-microvolt = <2040000>; 429 }; 430 431 vreg_s7a_1p025: s7 { 432 regulator-min-microvolt = <900000>; 433 regulator-max-microvolt = <1028000>; 434 }; 435 436 vreg_l1a_0p875: l1 { 437 regulator-min-microvolt = <880000>; 438 regulator-max-microvolt = <880000>; 439 }; 440 441 vreg_l2a_1p2: l2 { 442 regulator-min-microvolt = <1200000>; 443 regulator-max-microvolt = <1200000>; 444 }; 445 446 vreg_l3a_1p0: l3 { 447 regulator-min-microvolt = <1000000>; 448 regulator-max-microvolt = <1000000>; 449 }; 450 451 vreg_l5a_0p8: l5 { 452 regulator-min-microvolt = <800000>; 453 regulator-max-microvolt = <800000>; 454 }; 455 456 vreg_l6a_1p8: l6 { 457 regulator-min-microvolt = <1808000>; 458 regulator-max-microvolt = <1808000>; 459 }; 460 461 vreg_l7a_1p8: l7 { 462 regulator-min-microvolt = <1800000>; 463 regulator-max-microvolt = <1800000>; 464 }; 465 466 vreg_l8a_1p2: l8 { 467 regulator-min-microvolt = <1200000>; 468 regulator-max-microvolt = <1200000>; 469 }; 470 471 vreg_l9a_1p8: l9 { 472 regulator-min-microvolt = <1808000>; 473 regulator-max-microvolt = <2960000>; 474 }; 475 476 vreg_l10a_1p8: l10 { 477 regulator-min-microvolt = <1808000>; 478 regulator-max-microvolt = <2960000>; 479 }; 480 481 vreg_l11a_1p0: l11 { 482 regulator-min-microvolt = <1000000>; 483 regulator-max-microvolt = <1000000>; 484 }; 485 486 vreg_l12a_1p8: l12 { 487 regulator-min-microvolt = <1800000>; 488 regulator-max-microvolt = <1800000>; 489 }; 490 491 vreg_l13a_2p95: l13 { 492 regulator-min-microvolt = <1808000>; 493 regulator-max-microvolt = <2960000>; 494 }; 495 496 vreg_l14a_1p88: l14 { 497 regulator-min-microvolt = <1880000>; 498 regulator-max-microvolt = <1880000>; 499 }; 500 501 vreg_l15a_1p8: l15 { 502 regulator-min-microvolt = <1800000>; 503 regulator-max-microvolt = <1800000>; 504 }; 505 506 vreg_l16a_2p7: l16 { 507 regulator-min-microvolt = <2704000>; 508 regulator-max-microvolt = <2704000>; 509 }; 510 511 vreg_l17a_1p3: l17 { 512 regulator-min-microvolt = <1304000>; 513 regulator-max-microvolt = <1304000>; 514 }; 515 516 vreg_l18a_2p7: l18 { 517 regulator-min-microvolt = <2704000>; 518 regulator-max-microvolt = <2704000>; 519 }; 520 521 vreg_l19a_3p0: l19 { 522 regulator-min-microvolt = <3008000>; 523 regulator-max-microvolt = <3008000>; 524 }; 525 526 vreg_l20a_2p95: l20 { 527 regulator-min-microvolt = <2960000>; 528 regulator-max-microvolt = <2960000>; 529 regulator-allow-set-load; 530 }; 531 532 vreg_l21a_2p95: l21 { 533 regulator-min-microvolt = <2960000>; 534 regulator-max-microvolt = <2960000>; 535 regulator-system-load = <800000>; 536 regulator-allow-set-load; 537 }; 538 539 vreg_l22a_2p85: l22 { 540 regulator-min-microvolt = <2864000>; 541 regulator-max-microvolt = <2864000>; 542 }; 543 544 vreg_l23a_3p3: l23 { 545 regulator-min-microvolt = <3312000>; 546 regulator-max-microvolt = <3312000>; 547 }; 548 549 vreg_l24a_3p075: l24 { 550 regulator-min-microvolt = <3088000>; 551 regulator-max-microvolt = <3088000>; 552 }; 553 554 vreg_l25a_3p3: l25 { 555 regulator-min-microvolt = <3104000>; 556 regulator-max-microvolt = <3312000>; 557 }; 558 559 vreg_l26a_1p2: l26 { 560 regulator-min-microvolt = <1200000>; 561 regulator-max-microvolt = <1200000>; 562 regulator-allow-set-load; 563 }; 564 565 vreg_l28_3p0: l28 { 566 regulator-min-microvolt = <3008000>; 567 regulator-max-microvolt = <3008000>; 568 }; 569 570 vreg_lvs1a_1p8: lvs1 { 571 regulator-min-microvolt = <1800000>; 572 regulator-max-microvolt = <1800000>; 573 }; 574 575 vreg_lvs2a_1p8: lvs2 { 576 regulator-min-microvolt = <1800000>; 577 regulator-max-microvolt = <1800000>; 578 }; 579 580 }; 581 582 regulators-1 { 583 compatible = "qcom,rpm-pmi8998-regulators"; 584 585 vdd_bob-supply = <&vph_pwr>; 586 587 vreg_bob: bob { 588 regulator-min-microvolt = <3312000>; 589 regulator-max-microvolt = <3600000>; 590 }; 591 }; 592}; 593 594&remoteproc_adsp { 595 status = "okay"; 596}; 597 598&remoteproc_mss { 599 status = "okay"; 600}; 601 602&remoteproc_slpi { 603 status = "okay"; 604}; 605 606&tlmm { 607 gpio-reserved-ranges = <0 4>; 608 609 mdp_vsync_n: mdp-vsync-n-state { 610 pins = "gpio10"; 611 function = "mdp_vsync_a"; 612 bias-pull-down; 613 drive-strength = <2>; 614 }; 615 616 gpio_kb_pins_extra: gpio-kb-pins-extra-state { 617 pins = "gpio21", "gpio32", "gpio33", "gpio114", 618 "gpio128", "gpio129"; 619 function = "gpio"; 620 drive-strength = <2>; 621 bias-pull-up; 622 }; 623 624 ts_vio_default: ts-vio-def-state { 625 pins = "gpio81"; 626 function = "gpio"; 627 bias-disable; 628 drive-strength = <2>; 629 }; 630 631 ts_rst_n: ts-rst-n-state { 632 pins = "gpio89"; 633 function = "gpio"; 634 bias-pull-up; 635 drive-strength = <8>; 636 }; 637 638 hall_sensor1_default: hall-sensor1-def-state { 639 pins = "gpio124"; 640 function = "gpio"; 641 bias-disable; 642 drive-strength = <2>; 643 }; 644 645 ts_int_n: ts-int-n-state { 646 pins = "gpio125"; 647 function = "gpio"; 648 bias-disable; 649 drive-strength = <8>; 650 }; 651}; 652 653&sdhc2 { 654 status = "okay"; 655 cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; 656 657 vmmc-supply = <&vreg_l21a_2p95>; 658 vqmmc-supply = <&vreg_l13a_2p95>; 659 660 pinctrl-names = "default", "sleep"; 661 pinctrl-0 = <&sdc2_on &sdc2_cd>; 662 pinctrl-1 = <&sdc2_off &sdc2_cd>; 663}; 664 665&stm { 666 status = "okay"; 667}; 668 669&ufshc { 670 status = "okay"; 671 vcc-supply = <&vreg_l20a_2p95>; 672 vccq-supply = <&vreg_l26a_1p2>; 673 vccq2-supply = <&vreg_s4a_1p8>; 674 vcc-max-microamp = <750000>; 675 vccq-max-microamp = <560000>; 676 vccq2-max-microamp = <750000>; 677}; 678 679&ufsphy { 680 status = "okay"; 681 vdda-phy-supply = <&vreg_l1a_0p875>; 682 vdda-pll-supply = <&vreg_l2a_1p2>; 683 vddp-ref-clk-supply = <&vreg_l26a_1p2>; 684}; 685 686&usb3 { 687 status = "okay"; 688}; 689 690&usb3_dwc3 { 691 dr_mode = "peripheral"; 692 extcon = <&extcon_usb>; 693}; 694 695&usb3phy { 696 status = "okay"; 697 698 vdda-phy-supply = <&vreg_l1a_0p875>; 699 vdda-pll-supply = <&vreg_l2a_1p2>; 700}; 701 702/* GT9286 analog supply */ 703&vreg_l28_3p0 { 704 regulator-min-microvolt = <2800000>; 705 regulator-max-microvolt = <2800000>; 706}; 707 708&wifi { 709 status = "okay"; 710 711 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; 712 vdd-1.8-xo-supply = <&vreg_l7a_1p8>; 713 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; 714 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; 715}; 716