1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (C) 2023 Luca Weiss <luca@z3ntu.xyz>
4 */
5
6#include <dt-bindings/iio/qcom,spmi-vadc.h>
7#include <dt-bindings/interrupt-controller/irq.h>
8#include <dt-bindings/spmi/spmi.h>
9
10/ {
11	thermal-zones {
12		pmi632-thermal {
13			polling-delay-passive = <100>;
14			polling-delay = <0>;
15
16			thermal-sensors = <&pmi632_temp>;
17
18			trips {
19				trip0 {
20					temperature = <95000>;
21					hysteresis = <0>;
22					type = "passive";
23				};
24
25				trip1 {
26					temperature = <115000>;
27					hysteresis = <0>;
28					type = "hot";
29				};
30
31				trip2 {
32					temperature = <125000>;
33					hysteresis = <0>;
34					type = "critical";
35				};
36			};
37		};
38	};
39};
40
41&spmi_bus {
42	pmic@2 {
43		compatible = "qcom,pmi632", "qcom,spmi-pmic";
44		reg = <0x2 SPMI_USID>;
45		#address-cells = <1>;
46		#size-cells = <0>;
47
48		pmi632_temp: temp-alarm@2400 {
49			compatible = "qcom,spmi-temp-alarm";
50			reg = <0x2400>;
51			interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
52			#thermal-sensor-cells = <0>;
53		};
54
55		pmi632_adc: adc@3100 {
56			compatible = "qcom,spmi-adc5";
57			reg = <0x3100>;
58			#address-cells = <1>;
59			#size-cells = <0>;
60			#io-channel-cells = <1>;
61			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
62
63			channel@0 {
64				reg = <ADC5_REF_GND>;
65				qcom,pre-scaling = <1 1>;
66				label = "ref_gnd";
67			};
68
69			channel@1 {
70				reg = <ADC5_1P25VREF>;
71				qcom,pre-scaling = <1 1>;
72				label = "vref_1p25";
73			};
74
75			channel@6 {
76				reg = <ADC5_DIE_TEMP>;
77				qcom,pre-scaling = <1 1>;
78				label = "die_temp";
79			};
80
81			channel@7 {
82				reg = <ADC5_USB_IN_I>;
83				qcom,pre-scaling = <1 1>;
84				label = "usb_in_i_uv";
85			};
86
87			channel@8 {
88				reg = <ADC5_USB_IN_V_16>;
89				qcom,pre-scaling = <1 16>;
90				label = "usb_in_v_div_16";
91			};
92
93			channel@9 {
94				reg = <ADC5_CHG_TEMP>;
95				qcom,pre-scaling = <1 1>;
96				label = "chg_temp";
97			};
98
99			channel@4b {
100				reg = <ADC5_BAT_ID_100K_PU>;
101				qcom,hw-settle-time = <200>;
102				qcom,pre-scaling = <1 1>;
103				qcom,ratiometric;
104				label = "bat_id";
105			};
106
107			channel@83 {
108				reg = <ADC5_VPH_PWR>;
109				qcom,pre-scaling = <1 3>;
110				label = "vph_pwr";
111			};
112
113			channel@84 {
114				reg = <ADC5_VBAT_SNS>;
115				qcom,pre-scaling = <1 3>;
116				label = "vbat_sns";
117			};
118		};
119
120		pmi632_adc_tm: adc-tm@3500 {
121			compatible = "qcom,spmi-adc-tm5";
122			reg = <0x3500>;
123			interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
124			#thermal-sensor-cells = <1>;
125			#address-cells = <1>;
126			#size-cells = <0>;
127			status = "disabled";
128		};
129
130		pmi632_sdam_7: nvram@b600 {
131			compatible = "qcom,spmi-sdam";
132			reg = <0xb600>;
133			#address-cells = <1>;
134			#size-cells = <1>;
135			ranges = <0 0xb600 0x100>;
136		};
137
138		pmi632_gpios: gpio@c000 {
139			compatible = "qcom,pmi632-gpio", "qcom,spmi-gpio";
140			reg = <0xc000>;
141			gpio-controller;
142			gpio-ranges = <&pmi632_gpios 0 0 8>;
143			#gpio-cells = <2>;
144			interrupt-controller;
145			#interrupt-cells = <2>;
146		};
147	};
148
149	pmic@3 {
150		compatible = "qcom,pmi632", "qcom,spmi-pmic";
151		reg = <0x3 SPMI_USID>;
152		#address-cells = <1>;
153		#size-cells = <0>;
154
155		pmi632_lpg: pwm {
156			compatible = "qcom,pmi632-lpg";
157
158			#address-cells = <1>;
159			#size-cells = <0>;
160			#pwm-cells = <2>;
161
162			status = "disabled";
163		};
164	};
165};
166