1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (c) 2022, Linaro Ltd.
4 */
5
6/dts-v1/;
7
8#include "sdm845-db845c.dts"
9
10&camss {
11	vdda-phy-supply = <&vreg_l1a_0p875>;
12	vdda-pll-supply = <&vreg_l26a_1p2>;
13
14	status = "okay";
15
16	ports {
17		port@0 {
18			csiphy0_ep: endpoint {
19				data-lanes = <0 1 2 3>;
20				remote-endpoint = <&ov8856_ep>;
21			};
22		};
23	};
24};
25
26&cci {
27	status = "okay";
28};
29
30&cci_i2c0 {
31	camera@10 {
32		compatible = "ovti,ov8856";
33		reg = <0x10>;
34
35		/* CAM0_RST_N */
36		reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
37		pinctrl-names = "default";
38		pinctrl-0 = <&cam0_default>;
39
40		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
41		clock-names = "xvclk";
42		clock-frequency = <19200000>;
43
44		/*
45		 * The &vreg_s4a_1p8 trace is powered on as a,
46		 * so it is represented by a fixed regulator.
47		 *
48		 * The 2.8V vdda-supply and 1.2V vddd-supply regulators
49		 * both have to be enabled through the power management
50		 * gpios.
51		 */
52		dovdd-supply = <&vreg_lvs1a_1p8>;
53		avdd-supply = <&cam0_avdd_2v8>;
54		dvdd-supply = <&cam0_dvdd_1v2>;
55
56		port {
57			ov8856_ep: endpoint {
58				link-frequencies = /bits/ 64
59					<360000000 180000000>;
60				data-lanes = <1 2 3 4>;
61				remote-endpoint = <&csiphy0_ep>;
62			};
63		};
64	};
65};
66
67&cci_i2c1 {
68	camera@60 {
69		compatible = "ovti,ov7251";
70
71		/* I2C address as per ov7251.txt linux documentation */
72		reg = <0x60>;
73
74		/* CAM3_RST_N */
75		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
76		pinctrl-names = "default";
77		pinctrl-0 = <&cam3_default>;
78
79		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
80		clock-names = "xclk";
81		clock-frequency = <24000000>;
82
83		/*
84		 * The &vreg_s4a_1p8 trace always powered on.
85		 *
86		 * The 2.8V vdda-supply regulator is enabled when the
87		 * vreg_s4a_1p8 trace is pulled high.
88		 * It too is represented by a fixed regulator.
89		 *
90		 * No 1.2V vddd-supply regulator is used.
91		 */
92		vdddo-supply = <&vreg_lvs1a_1p8>;
93		vdda-supply = <&cam3_avdd_2v8>;
94
95		status = "disabled";
96
97		port {
98			ov7251_ep: endpoint {
99				data-lanes = <0 1>;
100/*				remote-endpoint = <&csiphy3_ep>; */
101			};
102		};
103	};
104};
105