1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2022, Linaro Limited
4 */
5
6#include <dt-bindings/clock/qcom,rpmh.h>
7#include <dt-bindings/clock/qcom,sm8450-videocc.h>
8#include <dt-bindings/clock/qcom,sm8550-gcc.h>
9#include <dt-bindings/clock/qcom,sm8550-gpucc.h>
10#include <dt-bindings/clock/qcom,sm8550-tcsr.h>
11#include <dt-bindings/clock/qcom,sm8550-dispcc.h>
12#include <dt-bindings/dma/qcom-gpi.h>
13#include <dt-bindings/gpio/gpio.h>
14#include <dt-bindings/interrupt-controller/arm-gic.h>
15#include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
16#include <dt-bindings/mailbox/qcom-ipcc.h>
17#include <dt-bindings/power/qcom-rpmpd.h>
18#include <dt-bindings/power/qcom,rpmhpd.h>
19#include <dt-bindings/soc/qcom,gpr.h>
20#include <dt-bindings/soc/qcom,rpmh-rsc.h>
21#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
22#include <dt-bindings/phy/phy-qcom-qmp.h>
23#include <dt-bindings/thermal/thermal.h>
24
25/ {
26	interrupt-parent = <&intc>;
27
28	#address-cells = <2>;
29	#size-cells = <2>;
30
31	chosen { };
32
33	clocks {
34		xo_board: xo-board {
35			compatible = "fixed-clock";
36			#clock-cells = <0>;
37		};
38
39		sleep_clk: sleep-clk {
40			compatible = "fixed-clock";
41			#clock-cells = <0>;
42		};
43
44		bi_tcxo_div2: bi-tcxo-div2-clk {
45			#clock-cells = <0>;
46			compatible = "fixed-factor-clock";
47			clocks = <&rpmhcc RPMH_CXO_CLK>;
48			clock-mult = <1>;
49			clock-div = <2>;
50		};
51
52		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
53			#clock-cells = <0>;
54			compatible = "fixed-factor-clock";
55			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
56			clock-mult = <1>;
57			clock-div = <2>;
58		};
59
60		pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
61			compatible = "fixed-clock";
62			#clock-cells = <0>;
63		};
64	};
65
66	cpus {
67		#address-cells = <2>;
68		#size-cells = <0>;
69
70		CPU0: cpu@0 {
71			device_type = "cpu";
72			compatible = "arm,cortex-a510";
73			reg = <0 0>;
74			clocks = <&cpufreq_hw 0>;
75			enable-method = "psci";
76			next-level-cache = <&L2_0>;
77			power-domains = <&CPU_PD0>;
78			power-domain-names = "psci";
79			qcom,freq-domain = <&cpufreq_hw 0>;
80			capacity-dmips-mhz = <1024>;
81			dynamic-power-coefficient = <100>;
82			#cooling-cells = <2>;
83			L2_0: l2-cache {
84				compatible = "cache";
85				cache-level = <2>;
86				cache-unified;
87				next-level-cache = <&L3_0>;
88				L3_0: l3-cache {
89					compatible = "cache";
90					cache-level = <3>;
91					cache-unified;
92				};
93			};
94		};
95
96		CPU1: cpu@100 {
97			device_type = "cpu";
98			compatible = "arm,cortex-a510";
99			reg = <0 0x100>;
100			clocks = <&cpufreq_hw 0>;
101			enable-method = "psci";
102			next-level-cache = <&L2_100>;
103			power-domains = <&CPU_PD1>;
104			power-domain-names = "psci";
105			qcom,freq-domain = <&cpufreq_hw 0>;
106			capacity-dmips-mhz = <1024>;
107			dynamic-power-coefficient = <100>;
108			#cooling-cells = <2>;
109			L2_100: l2-cache {
110				compatible = "cache";
111				cache-level = <2>;
112				cache-unified;
113				next-level-cache = <&L3_0>;
114			};
115		};
116
117		CPU2: cpu@200 {
118			device_type = "cpu";
119			compatible = "arm,cortex-a510";
120			reg = <0 0x200>;
121			clocks = <&cpufreq_hw 0>;
122			enable-method = "psci";
123			next-level-cache = <&L2_200>;
124			power-domains = <&CPU_PD2>;
125			power-domain-names = "psci";
126			qcom,freq-domain = <&cpufreq_hw 0>;
127			capacity-dmips-mhz = <1024>;
128			dynamic-power-coefficient = <100>;
129			#cooling-cells = <2>;
130			L2_200: l2-cache {
131				compatible = "cache";
132				cache-level = <2>;
133				cache-unified;
134				next-level-cache = <&L3_0>;
135			};
136		};
137
138		CPU3: cpu@300 {
139			device_type = "cpu";
140			compatible = "arm,cortex-a715";
141			reg = <0 0x300>;
142			clocks = <&cpufreq_hw 1>;
143			enable-method = "psci";
144			next-level-cache = <&L2_300>;
145			power-domains = <&CPU_PD3>;
146			power-domain-names = "psci";
147			qcom,freq-domain = <&cpufreq_hw 1>;
148			capacity-dmips-mhz = <1792>;
149			dynamic-power-coefficient = <270>;
150			#cooling-cells = <2>;
151			L2_300: l2-cache {
152				compatible = "cache";
153				cache-level = <2>;
154				cache-unified;
155				next-level-cache = <&L3_0>;
156			};
157		};
158
159		CPU4: cpu@400 {
160			device_type = "cpu";
161			compatible = "arm,cortex-a715";
162			reg = <0 0x400>;
163			clocks = <&cpufreq_hw 1>;
164			enable-method = "psci";
165			next-level-cache = <&L2_400>;
166			power-domains = <&CPU_PD4>;
167			power-domain-names = "psci";
168			qcom,freq-domain = <&cpufreq_hw 1>;
169			capacity-dmips-mhz = <1792>;
170			dynamic-power-coefficient = <270>;
171			#cooling-cells = <2>;
172			L2_400: l2-cache {
173				compatible = "cache";
174				cache-level = <2>;
175				cache-unified;
176				next-level-cache = <&L3_0>;
177			};
178		};
179
180		CPU5: cpu@500 {
181			device_type = "cpu";
182			compatible = "arm,cortex-a710";
183			reg = <0 0x500>;
184			clocks = <&cpufreq_hw 1>;
185			enable-method = "psci";
186			next-level-cache = <&L2_500>;
187			power-domains = <&CPU_PD5>;
188			power-domain-names = "psci";
189			qcom,freq-domain = <&cpufreq_hw 1>;
190			capacity-dmips-mhz = <1792>;
191			dynamic-power-coefficient = <270>;
192			#cooling-cells = <2>;
193			L2_500: l2-cache {
194				compatible = "cache";
195				cache-level = <2>;
196				cache-unified;
197				next-level-cache = <&L3_0>;
198			};
199		};
200
201		CPU6: cpu@600 {
202			device_type = "cpu";
203			compatible = "arm,cortex-a710";
204			reg = <0 0x600>;
205			clocks = <&cpufreq_hw 1>;
206			enable-method = "psci";
207			next-level-cache = <&L2_600>;
208			power-domains = <&CPU_PD6>;
209			power-domain-names = "psci";
210			qcom,freq-domain = <&cpufreq_hw 1>;
211			capacity-dmips-mhz = <1792>;
212			dynamic-power-coefficient = <270>;
213			#cooling-cells = <2>;
214			L2_600: l2-cache {
215				compatible = "cache";
216				cache-level = <2>;
217				cache-unified;
218				next-level-cache = <&L3_0>;
219			};
220		};
221
222		CPU7: cpu@700 {
223			device_type = "cpu";
224			compatible = "arm,cortex-x3";
225			reg = <0 0x700>;
226			clocks = <&cpufreq_hw 2>;
227			enable-method = "psci";
228			next-level-cache = <&L2_700>;
229			power-domains = <&CPU_PD7>;
230			power-domain-names = "psci";
231			qcom,freq-domain = <&cpufreq_hw 2>;
232			capacity-dmips-mhz = <1894>;
233			dynamic-power-coefficient = <588>;
234			#cooling-cells = <2>;
235			L2_700: l2-cache {
236				compatible = "cache";
237				cache-level = <2>;
238				cache-unified;
239				next-level-cache = <&L3_0>;
240			};
241		};
242
243		cpu-map {
244			cluster0 {
245				core0 {
246					cpu = <&CPU0>;
247				};
248
249				core1 {
250					cpu = <&CPU1>;
251				};
252
253				core2 {
254					cpu = <&CPU2>;
255				};
256
257				core3 {
258					cpu = <&CPU3>;
259				};
260
261				core4 {
262					cpu = <&CPU4>;
263				};
264
265				core5 {
266					cpu = <&CPU5>;
267				};
268
269				core6 {
270					cpu = <&CPU6>;
271				};
272
273				core7 {
274					cpu = <&CPU7>;
275				};
276			};
277		};
278
279		idle-states {
280			entry-method = "psci";
281
282			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
283				compatible = "arm,idle-state";
284				idle-state-name = "silver-rail-power-collapse";
285				arm,psci-suspend-param = <0x40000004>;
286				entry-latency-us = <800>;
287				exit-latency-us = <750>;
288				min-residency-us = <4090>;
289				local-timer-stop;
290			};
291
292			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
293				compatible = "arm,idle-state";
294				idle-state-name = "gold-rail-power-collapse";
295				arm,psci-suspend-param = <0x40000004>;
296				entry-latency-us = <600>;
297				exit-latency-us = <1550>;
298				min-residency-us = <4791>;
299				local-timer-stop;
300			};
301		};
302
303		domain-idle-states {
304			CLUSTER_SLEEP_0: cluster-sleep-0 {
305				compatible = "domain-idle-state";
306				arm,psci-suspend-param = <0x41000044>;
307				entry-latency-us = <1050>;
308				exit-latency-us = <2500>;
309				min-residency-us = <5309>;
310			};
311
312			CLUSTER_SLEEP_1: cluster-sleep-1 {
313				compatible = "domain-idle-state";
314				arm,psci-suspend-param = <0x4100c344>;
315				entry-latency-us = <2700>;
316				exit-latency-us = <3500>;
317				min-residency-us = <13959>;
318			};
319		};
320	};
321
322	firmware {
323		scm: scm {
324			compatible = "qcom,scm-sm8550", "qcom,scm";
325			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
326		};
327	};
328
329	clk_virt: interconnect-0 {
330		compatible = "qcom,sm8550-clk-virt";
331		#interconnect-cells = <2>;
332		qcom,bcm-voters = <&apps_bcm_voter>;
333	};
334
335	mc_virt: interconnect-1 {
336		compatible = "qcom,sm8550-mc-virt";
337		#interconnect-cells = <2>;
338		qcom,bcm-voters = <&apps_bcm_voter>;
339	};
340
341	memory@a0000000 {
342		device_type = "memory";
343		/* We expect the bootloader to fill in the size */
344		reg = <0 0xa0000000 0 0>;
345	};
346
347	pmu {
348		compatible = "arm,armv8-pmuv3";
349		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
350	};
351
352	psci {
353		compatible = "arm,psci-1.0";
354		method = "smc";
355
356		CPU_PD0: power-domain-cpu0 {
357			#power-domain-cells = <0>;
358			power-domains = <&CLUSTER_PD>;
359			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
360		};
361
362		CPU_PD1: power-domain-cpu1 {
363			#power-domain-cells = <0>;
364			power-domains = <&CLUSTER_PD>;
365			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
366		};
367
368		CPU_PD2: power-domain-cpu2 {
369			#power-domain-cells = <0>;
370			power-domains = <&CLUSTER_PD>;
371			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
372		};
373
374		CPU_PD3: power-domain-cpu3 {
375			#power-domain-cells = <0>;
376			power-domains = <&CLUSTER_PD>;
377			domain-idle-states = <&BIG_CPU_SLEEP_0>;
378		};
379
380		CPU_PD4: power-domain-cpu4 {
381			#power-domain-cells = <0>;
382			power-domains = <&CLUSTER_PD>;
383			domain-idle-states = <&BIG_CPU_SLEEP_0>;
384		};
385
386		CPU_PD5: power-domain-cpu5 {
387			#power-domain-cells = <0>;
388			power-domains = <&CLUSTER_PD>;
389			domain-idle-states = <&BIG_CPU_SLEEP_0>;
390		};
391
392		CPU_PD6: power-domain-cpu6 {
393			#power-domain-cells = <0>;
394			power-domains = <&CLUSTER_PD>;
395			domain-idle-states = <&BIG_CPU_SLEEP_0>;
396		};
397
398		CPU_PD7: power-domain-cpu7 {
399			#power-domain-cells = <0>;
400			power-domains = <&CLUSTER_PD>;
401			domain-idle-states = <&BIG_CPU_SLEEP_0>;
402		};
403
404		CLUSTER_PD: power-domain-cluster {
405			#power-domain-cells = <0>;
406			domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>;
407		};
408	};
409
410	reserved_memory: reserved-memory {
411		#address-cells = <2>;
412		#size-cells = <2>;
413		ranges;
414
415		hyp_mem: hyp-region@80000000 {
416			reg = <0 0x80000000 0 0xa00000>;
417			no-map;
418		};
419
420		cpusys_vm_mem: cpusys-vm-region@80a00000 {
421			reg = <0 0x80a00000 0 0x400000>;
422			no-map;
423		};
424
425		hyp_tags_mem: hyp-tags-region@80e00000 {
426			reg = <0 0x80e00000 0 0x3d0000>;
427			no-map;
428		};
429
430		xbl_sc_mem: xbl-sc-region@d8100000 {
431			reg = <0 0xd8100000 0 0x40000>;
432			no-map;
433		};
434
435		hyp_tags_reserved_mem: hyp-tags-reserved-region@811d0000 {
436			reg = <0 0x811d0000 0 0x30000>;
437			no-map;
438		};
439
440		/* merged xbl_dt_log, xbl_ramdump, aop_image */
441		xbl_dt_log_merged_mem: xbl-dt-log-merged-region@81a00000 {
442			reg = <0 0x81a00000 0 0x260000>;
443			no-map;
444		};
445
446		aop_cmd_db_mem: aop-cmd-db-region@81c60000 {
447			compatible = "qcom,cmd-db";
448			reg = <0 0x81c60000 0 0x20000>;
449			no-map;
450		};
451
452		/* merged aop_config, tme_crash_dump, tme_log, uefi_log */
453		aop_config_merged_mem: aop-config-merged-region@81c80000 {
454			reg = <0 0x81c80000 0 0x74000>;
455			no-map;
456		};
457
458		/* secdata region can be reused by apps */
459		smem: smem@81d00000 {
460			compatible = "qcom,smem";
461			reg = <0 0x81d00000 0 0x200000>;
462			hwlocks = <&tcsr_mutex 3>;
463			no-map;
464		};
465
466		adsp_mhi_mem: adsp-mhi-region@81f00000 {
467			reg = <0 0x81f00000 0 0x20000>;
468			no-map;
469		};
470
471		global_sync_mem: global-sync-region@82600000 {
472			reg = <0 0x82600000 0 0x100000>;
473			no-map;
474		};
475
476		tz_stat_mem: tz-stat-region@82700000 {
477			reg = <0 0x82700000 0 0x100000>;
478			no-map;
479		};
480
481		cdsp_secure_heap_mem: cdsp-secure-heap-region@82800000 {
482			reg = <0 0x82800000 0 0x4600000>;
483			no-map;
484		};
485
486		mpss_mem: mpss-region@8a800000 {
487			reg = <0 0x8a800000 0 0x10800000>;
488			no-map;
489		};
490
491		q6_mpss_dtb_mem: q6-mpss-dtb-region@9b000000 {
492			reg = <0 0x9b000000 0 0x80000>;
493			no-map;
494		};
495
496		ipa_fw_mem: ipa-fw-region@9b080000 {
497			reg = <0 0x9b080000 0 0x10000>;
498			no-map;
499		};
500
501		ipa_gsi_mem: ipa-gsi-region@9b090000 {
502			reg = <0 0x9b090000 0 0xa000>;
503			no-map;
504		};
505
506		gpu_micro_code_mem: gpu-micro-code-region@9b09a000 {
507			reg = <0 0x9b09a000 0 0x2000>;
508			no-map;
509		};
510
511		spss_region_mem: spss-region@9b100000 {
512			reg = <0 0x9b100000 0 0x180000>;
513			no-map;
514		};
515
516		/* First part of the "SPU secure shared memory" region */
517		spu_tz_shared_mem: spu-tz-shared-region@9b280000 {
518			reg = <0 0x9b280000 0 0x60000>;
519			no-map;
520		};
521
522		/* Second part of the "SPU secure shared memory" region */
523		spu_modem_shared_mem: spu-modem-shared-region@9b2e0000 {
524			reg = <0 0x9b2e0000 0 0x20000>;
525			no-map;
526		};
527
528		camera_mem: camera-region@9b300000 {
529			reg = <0 0x9b300000 0 0x800000>;
530			no-map;
531		};
532
533		video_mem: video-region@9bb00000 {
534			reg = <0 0x9bb00000 0 0x700000>;
535			no-map;
536		};
537
538		cvp_mem: cvp-region@9c200000 {
539			reg = <0 0x9c200000 0 0x700000>;
540			no-map;
541		};
542
543		cdsp_mem: cdsp-region@9c900000 {
544			reg = <0 0x9c900000 0 0x2000000>;
545			no-map;
546		};
547
548		q6_cdsp_dtb_mem: q6-cdsp-dtb-region@9e900000 {
549			reg = <0 0x9e900000 0 0x80000>;
550			no-map;
551		};
552
553		q6_adsp_dtb_mem: q6-adsp-dtb-region@9e980000 {
554			reg = <0 0x9e980000 0 0x80000>;
555			no-map;
556		};
557
558		adspslpi_mem: adspslpi-region@9ea00000 {
559			reg = <0 0x9ea00000 0 0x4080000>;
560			no-map;
561		};
562
563		/* uefi region can be reused by apps */
564
565		/* Linux kernel image is loaded at 0xa8000000 */
566
567		rmtfs_mem: rmtfs-region@d4a80000 {
568			compatible = "qcom,rmtfs-mem";
569			reg = <0x0 0xd4a80000 0x0 0x280000>;
570			no-map;
571
572			qcom,client-id = <1>;
573			qcom,vmid = <15>;
574		};
575
576		mpss_dsm_mem: mpss-dsm-region@d4d00000 {
577			reg = <0 0xd4d00000 0 0x3300000>;
578			no-map;
579		};
580
581		tz_reserved_mem: tz-reserved-region@d8000000 {
582			reg = <0 0xd8000000 0 0x100000>;
583			no-map;
584		};
585
586		cpucp_fw_mem: cpucp-fw-region@d8140000 {
587			reg = <0 0xd8140000 0 0x1c0000>;
588			no-map;
589		};
590
591		qtee_mem: qtee-region@d8300000 {
592			reg = <0 0xd8300000 0 0x500000>;
593			no-map;
594		};
595
596		ta_mem: ta-region@d8800000 {
597			reg = <0 0xd8800000 0 0x8a00000>;
598			no-map;
599		};
600
601		tz_tags_mem: tz-tags-region@e1200000 {
602			reg = <0 0xe1200000 0 0x2740000>;
603			no-map;
604		};
605
606		hwfence_shbuf: hwfence-shbuf-region@e6440000 {
607			reg = <0 0xe6440000 0 0x279000>;
608			no-map;
609		};
610
611		trust_ui_vm_mem: trust-ui-vm-region@f3600000 {
612			reg = <0 0xf3600000 0 0x4aee000>;
613			no-map;
614		};
615
616		trust_ui_vm_dump: trust-ui-vm-dump-region@f80ee000 {
617			reg = <0 0xf80ee000 0 0x1000>;
618			no-map;
619		};
620
621		trust_ui_vm_qrtr: trust-ui-vm-qrt-region@f80ef000 {
622			reg = <0 0xf80ef000 0 0x9000>;
623			no-map;
624		};
625
626		trust_ui_vm_vblk0_ring: trust-ui-vm-vblk0-ring-region@f80f8000 {
627			reg = <0 0xf80f8000 0 0x4000>;
628			no-map;
629		};
630
631		trust_ui_vm_vblk1_ring: trust-ui-vm-vblk1-ring-region@f80fc000 {
632			reg = <0 0xf80fc000 0 0x4000>;
633			no-map;
634		};
635
636		trust_ui_vm_swiotlb: trust-ui-vm-swiotlb-region@f8100000 {
637			reg = <0 0xf8100000 0 0x100000>;
638			no-map;
639		};
640
641		oem_vm_mem: oem-vm-region@f8400000 {
642			reg = <0 0xf8400000 0 0x4800000>;
643			no-map;
644		};
645
646		oem_vm_vblk0_ring: oem-vm-vblk0-ring-region@fcc00000 {
647			reg = <0 0xfcc00000 0 0x4000>;
648			no-map;
649		};
650
651		oem_vm_swiotlb: oem-vm-swiotlb-region@fcc04000 {
652			reg = <0 0xfcc04000 0 0x100000>;
653			no-map;
654		};
655
656		hyp_ext_tags_mem: hyp-ext-tags-region@fce00000 {
657			reg = <0 0xfce00000 0 0x2900000>;
658			no-map;
659		};
660
661		hyp_ext_reserved_mem: hyp-ext-reserved-region@ff700000 {
662			reg = <0 0xff700000 0 0x100000>;
663			no-map;
664		};
665	};
666
667	smp2p-adsp {
668		compatible = "qcom,smp2p";
669		qcom,smem = <443>, <429>;
670		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
671					     IPCC_MPROC_SIGNAL_SMP2P
672					     IRQ_TYPE_EDGE_RISING>;
673		mboxes = <&ipcc IPCC_CLIENT_LPASS
674				IPCC_MPROC_SIGNAL_SMP2P>;
675
676		qcom,local-pid = <0>;
677		qcom,remote-pid = <2>;
678
679		smp2p_adsp_out: master-kernel {
680			qcom,entry-name = "master-kernel";
681			#qcom,smem-state-cells = <1>;
682		};
683
684		smp2p_adsp_in: slave-kernel {
685			qcom,entry-name = "slave-kernel";
686			interrupt-controller;
687			#interrupt-cells = <2>;
688		};
689	};
690
691	smp2p-cdsp {
692		compatible = "qcom,smp2p";
693		qcom,smem = <94>, <432>;
694		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
695					     IPCC_MPROC_SIGNAL_SMP2P
696					     IRQ_TYPE_EDGE_RISING>;
697		mboxes = <&ipcc IPCC_CLIENT_CDSP
698				IPCC_MPROC_SIGNAL_SMP2P>;
699
700		qcom,local-pid = <0>;
701		qcom,remote-pid = <5>;
702
703		smp2p_cdsp_out: master-kernel {
704			qcom,entry-name = "master-kernel";
705			#qcom,smem-state-cells = <1>;
706		};
707
708		smp2p_cdsp_in: slave-kernel {
709			qcom,entry-name = "slave-kernel";
710			interrupt-controller;
711			#interrupt-cells = <2>;
712		};
713	};
714
715	smp2p-modem {
716		compatible = "qcom,smp2p";
717		qcom,smem = <435>, <428>;
718		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
719					     IPCC_MPROC_SIGNAL_SMP2P
720					     IRQ_TYPE_EDGE_RISING>;
721		mboxes = <&ipcc IPCC_CLIENT_MPSS
722				IPCC_MPROC_SIGNAL_SMP2P>;
723
724		qcom,local-pid = <0>;
725		qcom,remote-pid = <1>;
726
727		smp2p_modem_out: master-kernel {
728			qcom,entry-name = "master-kernel";
729			#qcom,smem-state-cells = <1>;
730		};
731
732		smp2p_modem_in: slave-kernel {
733			qcom,entry-name = "slave-kernel";
734			interrupt-controller;
735			#interrupt-cells = <2>;
736		};
737
738		ipa_smp2p_out: ipa-ap-to-modem {
739			qcom,entry-name = "ipa";
740			#qcom,smem-state-cells = <1>;
741		};
742
743		ipa_smp2p_in: ipa-modem-to-ap {
744			qcom,entry-name = "ipa";
745			interrupt-controller;
746			#interrupt-cells = <2>;
747		};
748	};
749
750	soc: soc@0 {
751		compatible = "simple-bus";
752		ranges = <0 0 0 0 0x10 0>;
753		dma-ranges = <0 0 0 0 0x10 0>;
754
755		#address-cells = <2>;
756		#size-cells = <2>;
757
758		gcc: clock-controller@100000 {
759			compatible = "qcom,sm8550-gcc";
760			reg = <0 0x00100000 0 0x1f4200>;
761			#clock-cells = <1>;
762			#reset-cells = <1>;
763			#power-domain-cells = <1>;
764			clocks = <&bi_tcxo_div2>, <&sleep_clk>,
765				 <&pcie0_phy>,
766				 <&pcie1_phy>,
767				 <&pcie_1_phy_aux_clk>,
768				 <&ufs_mem_phy 0>,
769				 <&ufs_mem_phy 1>,
770				 <&ufs_mem_phy 2>,
771				 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
772		};
773
774		ipcc: mailbox@408000 {
775			compatible = "qcom,sm8550-ipcc", "qcom,ipcc";
776			reg = <0 0x00408000 0 0x1000>;
777			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
778			interrupt-controller;
779			#interrupt-cells = <3>;
780			#mbox-cells = <2>;
781		};
782
783		gpi_dma2: dma-controller@800000 {
784			compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
785			#dma-cells = <3>;
786			reg = <0 0x00800000 0 0x60000>;
787			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
788				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
789				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
790				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
791				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
792				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
793				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
794				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
795				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
796				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
797				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
798				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
799			dma-channels = <12>;
800			dma-channel-mask = <0x3e>;
801			iommus = <&apps_smmu 0x436 0>;
802			status = "disabled";
803		};
804
805		qupv3_id_1: geniqup@8c0000 {
806			compatible = "qcom,geni-se-qup";
807			reg = <0 0x008c0000 0 0x2000>;
808			ranges;
809			clock-names = "m-ahb", "s-ahb";
810			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
811				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
812			iommus = <&apps_smmu 0x423 0>;
813			#address-cells = <2>;
814			#size-cells = <2>;
815			status = "disabled";
816
817			i2c8: i2c@880000 {
818				compatible = "qcom,geni-i2c";
819				reg = <0 0x00880000 0 0x4000>;
820				clock-names = "se";
821				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
822				pinctrl-names = "default";
823				pinctrl-0 = <&qup_i2c8_data_clk>;
824				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
825				#address-cells = <1>;
826				#size-cells = <0>;
827				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
828						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
829						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
830				interconnect-names = "qup-core", "qup-config", "qup-memory";
831				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
832				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
833				dma-names = "tx", "rx";
834				status = "disabled";
835			};
836
837			spi8: spi@880000 {
838				compatible = "qcom,geni-spi";
839				reg = <0 0x00880000 0 0x4000>;
840				clock-names = "se";
841				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
842				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
843				pinctrl-names = "default";
844				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
845				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
846						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
847						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
848				interconnect-names = "qup-core", "qup-config", "qup-memory";
849				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
850				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
851				dma-names = "tx", "rx";
852				#address-cells = <1>;
853				#size-cells = <0>;
854				status = "disabled";
855			};
856
857			i2c9: i2c@884000 {
858				compatible = "qcom,geni-i2c";
859				reg = <0 0x00884000 0 0x4000>;
860				clock-names = "se";
861				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
862				pinctrl-names = "default";
863				pinctrl-0 = <&qup_i2c9_data_clk>;
864				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
865				#address-cells = <1>;
866				#size-cells = <0>;
867				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
868						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
869						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
870				interconnect-names = "qup-core", "qup-config", "qup-memory";
871				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
872				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
873				dma-names = "tx", "rx";
874				status = "disabled";
875			};
876
877			spi9: spi@884000 {
878				compatible = "qcom,geni-spi";
879				reg = <0 0x00884000 0 0x4000>;
880				clock-names = "se";
881				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
882				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
883				pinctrl-names = "default";
884				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
885				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
886						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
887						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
888				interconnect-names = "qup-core", "qup-config", "qup-memory";
889				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
890				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
891				dma-names = "tx", "rx";
892				#address-cells = <1>;
893				#size-cells = <0>;
894				status = "disabled";
895			};
896
897			i2c10: i2c@888000 {
898				compatible = "qcom,geni-i2c";
899				reg = <0 0x00888000 0 0x4000>;
900				clock-names = "se";
901				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
902				pinctrl-names = "default";
903				pinctrl-0 = <&qup_i2c10_data_clk>;
904				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
905				#address-cells = <1>;
906				#size-cells = <0>;
907				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
908						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
909						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
910				interconnect-names = "qup-core", "qup-config", "qup-memory";
911				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
912				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
913				dma-names = "tx", "rx";
914				status = "disabled";
915			};
916
917			spi10: spi@888000 {
918				compatible = "qcom,geni-spi";
919				reg = <0 0x00888000 0 0x4000>;
920				clock-names = "se";
921				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
922				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
923				pinctrl-names = "default";
924				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
925				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
926						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
927						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
928				interconnect-names = "qup-core", "qup-config", "qup-memory";
929				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
930				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
931				dma-names = "tx", "rx";
932				#address-cells = <1>;
933				#size-cells = <0>;
934				status = "disabled";
935			};
936
937			i2c11: i2c@88c000 {
938				compatible = "qcom,geni-i2c";
939				reg = <0 0x0088c000 0 0x4000>;
940				clock-names = "se";
941				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
942				pinctrl-names = "default";
943				pinctrl-0 = <&qup_i2c11_data_clk>;
944				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
945				#address-cells = <1>;
946				#size-cells = <0>;
947				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
948						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
949						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
950				interconnect-names = "qup-core", "qup-config", "qup-memory";
951				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
952				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
953				dma-names = "tx", "rx";
954				status = "disabled";
955			};
956
957			spi11: spi@88c000 {
958				compatible = "qcom,geni-spi";
959				reg = <0 0x0088c000 0 0x4000>;
960				clock-names = "se";
961				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
962				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
963				pinctrl-names = "default";
964				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
965				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
966						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
967						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
968				interconnect-names = "qup-core", "qup-config", "qup-memory";
969				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
970				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
971				dma-names = "tx", "rx";
972				#address-cells = <1>;
973				#size-cells = <0>;
974				status = "disabled";
975			};
976
977			i2c12: i2c@890000 {
978				compatible = "qcom,geni-i2c";
979				reg = <0 0x00890000 0 0x4000>;
980				clock-names = "se";
981				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
982				pinctrl-names = "default";
983				pinctrl-0 = <&qup_i2c12_data_clk>;
984				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
985				#address-cells = <1>;
986				#size-cells = <0>;
987				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
988						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
989						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
990				interconnect-names = "qup-core", "qup-config", "qup-memory";
991				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
992				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
993				dma-names = "tx", "rx";
994				status = "disabled";
995			};
996
997			spi12: spi@890000 {
998				compatible = "qcom,geni-spi";
999				reg = <0 0x00890000 0 0x4000>;
1000				clock-names = "se";
1001				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
1002				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
1003				pinctrl-names = "default";
1004				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
1005				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1006						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
1007						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
1008				interconnect-names = "qup-core", "qup-config", "qup-memory";
1009				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
1010				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
1011				dma-names = "tx", "rx";
1012				#address-cells = <1>;
1013				#size-cells = <0>;
1014				status = "disabled";
1015			};
1016
1017			i2c13: i2c@894000 {
1018				compatible = "qcom,geni-i2c";
1019				reg = <0 0x00894000 0 0x4000>;
1020				clock-names = "se";
1021				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1022				pinctrl-names = "default";
1023				pinctrl-0 = <&qup_i2c13_data_clk>;
1024				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1025				#address-cells = <1>;
1026				#size-cells = <0>;
1027				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1028						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
1029						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
1030				interconnect-names = "qup-core", "qup-config", "qup-memory";
1031				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
1032				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
1033				dma-names = "tx", "rx";
1034				status = "disabled";
1035			};
1036
1037			spi13: spi@894000 {
1038				compatible = "qcom,geni-spi";
1039				reg = <0 0x00894000 0 0x4000>;
1040				clock-names = "se";
1041				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1042				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1043				pinctrl-names = "default";
1044				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
1045				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1046						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
1047						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
1048				interconnect-names = "qup-core", "qup-config", "qup-memory";
1049				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
1050				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
1051				dma-names = "tx", "rx";
1052				#address-cells = <1>;
1053				#size-cells = <0>;
1054				status = "disabled";
1055			};
1056
1057			i2c15: i2c@89c000 {
1058				compatible = "qcom,geni-i2c";
1059				reg = <0 0x0089c000 0 0x4000>;
1060				clock-names = "se";
1061				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
1062				pinctrl-names = "default";
1063				pinctrl-0 = <&qup_i2c15_data_clk>;
1064				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
1065				#address-cells = <1>;
1066				#size-cells = <0>;
1067				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1068						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
1069						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
1070				interconnect-names = "qup-core", "qup-config", "qup-memory";
1071				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
1072				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
1073				dma-names = "tx", "rx";
1074				status = "disabled";
1075			};
1076
1077			spi15: spi@89c000 {
1078				compatible = "qcom,geni-spi";
1079				reg = <0 0x0089c000 0 0x4000>;
1080				clock-names = "se";
1081				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
1082				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
1083				pinctrl-names = "default";
1084				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
1085				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1086						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
1087						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
1088				interconnect-names = "qup-core", "qup-config", "qup-memory";
1089				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
1090				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
1091				dma-names = "tx", "rx";
1092				#address-cells = <1>;
1093				#size-cells = <0>;
1094				status = "disabled";
1095			};
1096		};
1097
1098		i2c_master_hub_0: geniqup@9c0000 {
1099			compatible = "qcom,geni-se-i2c-master-hub";
1100			reg = <0x0 0x009c0000 0x0 0x2000>;
1101			clock-names = "s-ahb";
1102			clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>;
1103			#address-cells = <2>;
1104			#size-cells = <2>;
1105			ranges;
1106			status = "disabled";
1107
1108			i2c_hub_0: i2c@980000 {
1109				compatible = "qcom,geni-i2c-master-hub";
1110				reg = <0x0 0x00980000 0x0 0x4000>;
1111				clock-names = "se", "core";
1112				clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
1113					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1114				pinctrl-names = "default";
1115				pinctrl-0 = <&hub_i2c0_data_clk>;
1116				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
1117				#address-cells = <1>;
1118				#size-cells = <0>;
1119				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1120						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1121				interconnect-names = "qup-core", "qup-config";
1122				status = "disabled";
1123			};
1124
1125			i2c_hub_1: i2c@984000 {
1126				compatible = "qcom,geni-i2c-master-hub";
1127				reg = <0x0 0x00984000 0x0 0x4000>;
1128				clock-names = "se", "core";
1129				clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
1130					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1131				pinctrl-names = "default";
1132				pinctrl-0 = <&hub_i2c1_data_clk>;
1133				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
1134				#address-cells = <1>;
1135				#size-cells = <0>;
1136				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1137						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1138				interconnect-names = "qup-core", "qup-config";
1139				status = "disabled";
1140			};
1141
1142			i2c_hub_2: i2c@988000 {
1143				compatible = "qcom,geni-i2c-master-hub";
1144				reg = <0x0 0x00988000 0x0 0x4000>;
1145				clock-names = "se", "core";
1146				clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
1147					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1148				pinctrl-names = "default";
1149				pinctrl-0 = <&hub_i2c2_data_clk>;
1150				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
1151				#address-cells = <1>;
1152				#size-cells = <0>;
1153				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1154						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1155				interconnect-names = "qup-core", "qup-config";
1156				status = "disabled";
1157			};
1158
1159			i2c_hub_3: i2c@98c000 {
1160				compatible = "qcom,geni-i2c-master-hub";
1161				reg = <0x0 0x0098c000 0x0 0x4000>;
1162				clock-names = "se", "core";
1163				clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
1164					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1165				pinctrl-names = "default";
1166				pinctrl-0 = <&hub_i2c3_data_clk>;
1167				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
1168				#address-cells = <1>;
1169				#size-cells = <0>;
1170				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1171						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1172				interconnect-names = "qup-core", "qup-config";
1173				status = "disabled";
1174			};
1175
1176			i2c_hub_4: i2c@990000 {
1177				compatible = "qcom,geni-i2c-master-hub";
1178				reg = <0x0 0x00990000 0x0 0x4000>;
1179				clock-names = "se", "core";
1180				clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
1181					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1182				pinctrl-names = "default";
1183				pinctrl-0 = <&hub_i2c4_data_clk>;
1184				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
1185				#address-cells = <1>;
1186				#size-cells = <0>;
1187				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1188						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1189				interconnect-names = "qup-core", "qup-config";
1190				status = "disabled";
1191			};
1192
1193			i2c_hub_5: i2c@994000 {
1194				compatible = "qcom,geni-i2c-master-hub";
1195				reg = <0 0x00994000 0 0x4000>;
1196				clock-names = "se", "core";
1197				clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>,
1198					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1199				pinctrl-names = "default";
1200				pinctrl-0 = <&hub_i2c5_data_clk>;
1201				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
1202				#address-cells = <1>;
1203				#size-cells = <0>;
1204				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1205						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1206				interconnect-names = "qup-core", "qup-config";
1207				status = "disabled";
1208			};
1209
1210			i2c_hub_6: i2c@998000 {
1211				compatible = "qcom,geni-i2c-master-hub";
1212				reg = <0 0x00998000 0 0x4000>;
1213				clock-names = "se", "core";
1214				clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>,
1215					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1216				pinctrl-names = "default";
1217				pinctrl-0 = <&hub_i2c6_data_clk>;
1218				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
1219				#address-cells = <1>;
1220				#size-cells = <0>;
1221				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1222						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1223				interconnect-names = "qup-core", "qup-config";
1224				status = "disabled";
1225			};
1226
1227			i2c_hub_7: i2c@99c000 {
1228				compatible = "qcom,geni-i2c-master-hub";
1229				reg = <0 0x0099c000 0 0x4000>;
1230				clock-names = "se", "core";
1231				clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>,
1232					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1233				pinctrl-names = "default";
1234				pinctrl-0 = <&hub_i2c7_data_clk>;
1235				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
1236				#address-cells = <1>;
1237				#size-cells = <0>;
1238				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1239						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1240				interconnect-names = "qup-core", "qup-config";
1241				status = "disabled";
1242			};
1243
1244			i2c_hub_8: i2c@9a0000 {
1245				compatible = "qcom,geni-i2c-master-hub";
1246				reg = <0 0x009a0000 0 0x4000>;
1247				clock-names = "se", "core";
1248				clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>,
1249					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1250				pinctrl-names = "default";
1251				pinctrl-0 = <&hub_i2c8_data_clk>;
1252				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
1253				#address-cells = <1>;
1254				#size-cells = <0>;
1255				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1256						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1257				interconnect-names = "qup-core", "qup-config";
1258				status = "disabled";
1259			};
1260
1261			i2c_hub_9: i2c@9a4000 {
1262				compatible = "qcom,geni-i2c-master-hub";
1263				reg = <0 0x009a4000 0 0x4000>;
1264				clock-names = "se", "core";
1265				clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>,
1266					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1267				pinctrl-names = "default";
1268				pinctrl-0 = <&hub_i2c9_data_clk>;
1269				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
1270				#address-cells = <1>;
1271				#size-cells = <0>;
1272				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1273						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1274				interconnect-names = "qup-core", "qup-config";
1275				status = "disabled";
1276			};
1277		};
1278
1279		gpi_dma1: dma-controller@a00000 {
1280			compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
1281			#dma-cells = <3>;
1282			reg = <0 0x00a00000 0 0x60000>;
1283			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
1284				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
1285				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
1286				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
1287				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
1288				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
1289				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
1290				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
1291				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
1292				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
1293				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
1294				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
1295			dma-channels = <12>;
1296			dma-channel-mask = <0x1e>;
1297			iommus = <&apps_smmu 0xb6 0>;
1298			status = "disabled";
1299		};
1300
1301		qupv3_id_0: geniqup@ac0000 {
1302			compatible = "qcom,geni-se-qup";
1303			reg = <0 0x00ac0000 0 0x2000>;
1304			ranges;
1305			clock-names = "m-ahb", "s-ahb";
1306			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
1307				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
1308			iommus = <&apps_smmu 0xa3 0>;
1309			interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
1310			interconnect-names = "qup-core";
1311			#address-cells = <2>;
1312			#size-cells = <2>;
1313			status = "disabled";
1314
1315			i2c0: i2c@a80000 {
1316				compatible = "qcom,geni-i2c";
1317				reg = <0 0x00a80000 0 0x4000>;
1318				clock-names = "se";
1319				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1320				pinctrl-names = "default";
1321				pinctrl-0 = <&qup_i2c0_data_clk>;
1322				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1323				#address-cells = <1>;
1324				#size-cells = <0>;
1325				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1326						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1327						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1328				interconnect-names = "qup-core", "qup-config", "qup-memory";
1329				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
1330				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
1331				dma-names = "tx", "rx";
1332				status = "disabled";
1333			};
1334
1335			spi0: spi@a80000 {
1336				compatible = "qcom,geni-spi";
1337				reg = <0 0x00a80000 0 0x4000>;
1338				clock-names = "se";
1339				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1340				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1341				pinctrl-names = "default";
1342				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
1343				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1344						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1345						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1346				interconnect-names = "qup-core", "qup-config", "qup-memory";
1347				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
1348				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
1349				dma-names = "tx", "rx";
1350				#address-cells = <1>;
1351				#size-cells = <0>;
1352				status = "disabled";
1353			};
1354
1355			i2c1: i2c@a84000 {
1356				compatible = "qcom,geni-i2c";
1357				reg = <0 0x00a84000 0 0x4000>;
1358				clock-names = "se";
1359				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1360				pinctrl-names = "default";
1361				pinctrl-0 = <&qup_i2c1_data_clk>;
1362				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1363				#address-cells = <1>;
1364				#size-cells = <0>;
1365				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1366						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1367						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1368				interconnect-names = "qup-core", "qup-config", "qup-memory";
1369				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
1370				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
1371				dma-names = "tx", "rx";
1372				status = "disabled";
1373			};
1374
1375			spi1: spi@a84000 {
1376				compatible = "qcom,geni-spi";
1377				reg = <0 0x00a84000 0 0x4000>;
1378				clock-names = "se";
1379				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1380				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1381				pinctrl-names = "default";
1382				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
1383				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1384						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1385						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1386				interconnect-names = "qup-core", "qup-config", "qup-memory";
1387				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
1388				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
1389				dma-names = "tx", "rx";
1390				#address-cells = <1>;
1391				#size-cells = <0>;
1392				status = "disabled";
1393			};
1394
1395			i2c2: i2c@a88000 {
1396				compatible = "qcom,geni-i2c";
1397				reg = <0 0x00a88000 0 0x4000>;
1398				clock-names = "se";
1399				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1400				pinctrl-names = "default";
1401				pinctrl-0 = <&qup_i2c2_data_clk>;
1402				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1403				#address-cells = <1>;
1404				#size-cells = <0>;
1405				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1406						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1407						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1408				interconnect-names = "qup-core", "qup-config", "qup-memory";
1409				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
1410				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
1411				dma-names = "tx", "rx";
1412				status = "disabled";
1413			};
1414
1415			spi2: spi@a88000 {
1416				compatible = "qcom,geni-spi";
1417				reg = <0 0x00a88000 0 0x4000>;
1418				clock-names = "se";
1419				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1420				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1421				pinctrl-names = "default";
1422				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
1423				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1424						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1425						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1426				interconnect-names = "qup-core", "qup-config", "qup-memory";
1427				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
1428				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
1429				dma-names = "tx", "rx";
1430				#address-cells = <1>;
1431				#size-cells = <0>;
1432				status = "disabled";
1433			};
1434
1435			i2c3: i2c@a8c000 {
1436				compatible = "qcom,geni-i2c";
1437				reg = <0 0x00a8c000 0 0x4000>;
1438				clock-names = "se";
1439				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1440				pinctrl-names = "default";
1441				pinctrl-0 = <&qup_i2c3_data_clk>;
1442				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1443				#address-cells = <1>;
1444				#size-cells = <0>;
1445				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1446						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1447						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1448				interconnect-names = "qup-core", "qup-config", "qup-memory";
1449				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
1450				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
1451				dma-names = "tx", "rx";
1452				status = "disabled";
1453			};
1454
1455			spi3: spi@a8c000 {
1456				compatible = "qcom,geni-spi";
1457				reg = <0 0x00a8c000 0 0x4000>;
1458				clock-names = "se";
1459				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1460				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1461				pinctrl-names = "default";
1462				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
1463				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1464						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1465						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1466				interconnect-names = "qup-core", "qup-config", "qup-memory";
1467				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
1468				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
1469				dma-names = "tx", "rx";
1470				#address-cells = <1>;
1471				#size-cells = <0>;
1472				status = "disabled";
1473			};
1474
1475			i2c4: i2c@a90000 {
1476				compatible = "qcom,geni-i2c";
1477				reg = <0 0x00a90000 0 0x4000>;
1478				clock-names = "se";
1479				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1480				pinctrl-names = "default";
1481				pinctrl-0 = <&qup_i2c4_data_clk>;
1482				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1483				#address-cells = <1>;
1484				#size-cells = <0>;
1485				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1486						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1487						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1488				interconnect-names = "qup-core", "qup-config", "qup-memory";
1489				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
1490				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
1491				dma-names = "tx", "rx";
1492				status = "disabled";
1493			};
1494
1495			spi4: spi@a90000 {
1496				compatible = "qcom,geni-spi";
1497				reg = <0 0x00a90000 0 0x4000>;
1498				clock-names = "se";
1499				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1500				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1501				pinctrl-names = "default";
1502				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
1503				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1504						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1505						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1506				interconnect-names = "qup-core", "qup-config", "qup-memory";
1507				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
1508				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
1509				dma-names = "tx", "rx";
1510				#address-cells = <1>;
1511				#size-cells = <0>;
1512				status = "disabled";
1513			};
1514
1515			i2c5: i2c@a94000 {
1516				compatible = "qcom,geni-i2c";
1517				reg = <0 0x00a94000 0 0x4000>;
1518				clock-names = "se";
1519				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1520				pinctrl-names = "default";
1521				pinctrl-0 = <&qup_i2c5_data_clk>;
1522				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1523				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1524						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1525						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1526				interconnect-names = "qup-core", "qup-config", "qup-memory";
1527				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
1528				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
1529				dma-names = "tx", "rx";
1530				#address-cells = <1>;
1531				#size-cells = <0>;
1532				status = "disabled";
1533			};
1534
1535			spi5: spi@a94000 {
1536				compatible = "qcom,geni-spi";
1537				reg = <0 0x00a94000 0 0x4000>;
1538				clock-names = "se";
1539				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1540				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1541				pinctrl-names = "default";
1542				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
1543				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1544						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1545						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1546				interconnect-names = "qup-core", "qup-config", "qup-memory";
1547				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
1548				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
1549				dma-names = "tx", "rx";
1550				#address-cells = <1>;
1551				#size-cells = <0>;
1552				status = "disabled";
1553			};
1554
1555			i2c6: i2c@a98000 {
1556				compatible = "qcom,geni-i2c";
1557				reg = <0 0x00a98000 0 0x4000>;
1558				clock-names = "se";
1559				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
1560				pinctrl-names = "default";
1561				pinctrl-0 = <&qup_i2c6_data_clk>;
1562				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
1563				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1564						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1565						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1566				interconnect-names = "qup-core", "qup-config", "qup-memory";
1567				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
1568				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
1569				dma-names = "tx", "rx";
1570				#address-cells = <1>;
1571				#size-cells = <0>;
1572				status = "disabled";
1573			};
1574
1575			spi6: spi@a98000 {
1576				compatible = "qcom,geni-spi";
1577				reg = <0 0x00a98000 0 0x4000>;
1578				clock-names = "se";
1579				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
1580				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
1581				pinctrl-names = "default";
1582				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
1583				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1584						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1585						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1586				interconnect-names = "qup-core", "qup-config", "qup-memory";
1587				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
1588				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
1589				dma-names = "tx", "rx";
1590				#address-cells = <1>;
1591				#size-cells = <0>;
1592				status = "disabled";
1593			};
1594
1595			uart7: serial@a9c000 {
1596				compatible = "qcom,geni-debug-uart";
1597				reg = <0 0x00a9c000 0 0x4000>;
1598				clock-names = "se";
1599				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
1600				pinctrl-names = "default";
1601				pinctrl-0 = <&qup_uart7_default>;
1602				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
1603				interconnect-names = "qup-core", "qup-config";
1604				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1605						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1606				status = "disabled";
1607			};
1608		};
1609
1610		cnoc_main: interconnect@1500000 {
1611			compatible = "qcom,sm8550-cnoc-main";
1612			reg = <0 0x01500000 0 0x13080>;
1613			#interconnect-cells = <2>;
1614			qcom,bcm-voters = <&apps_bcm_voter>;
1615		};
1616
1617		config_noc: interconnect@1600000 {
1618			compatible = "qcom,sm8550-config-noc";
1619			reg = <0 0x01600000 0 0x6200>;
1620			#interconnect-cells = <2>;
1621			qcom,bcm-voters = <&apps_bcm_voter>;
1622		};
1623
1624		system_noc: interconnect@1680000 {
1625			compatible = "qcom,sm8550-system-noc";
1626			reg = <0 0x01680000 0 0x1d080>;
1627			#interconnect-cells = <2>;
1628			qcom,bcm-voters = <&apps_bcm_voter>;
1629		};
1630
1631		pcie_noc: interconnect@16c0000 {
1632			compatible = "qcom,sm8550-pcie-anoc";
1633			reg = <0 0x016c0000 0 0x12200>;
1634			#interconnect-cells = <2>;
1635			clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
1636				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
1637			qcom,bcm-voters = <&apps_bcm_voter>;
1638		};
1639
1640		aggre1_noc: interconnect@16e0000 {
1641			compatible = "qcom,sm8550-aggre1-noc";
1642			reg = <0 0x016e0000 0 0x14400>;
1643			#interconnect-cells = <2>;
1644			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
1645				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
1646			qcom,bcm-voters = <&apps_bcm_voter>;
1647		};
1648
1649		aggre2_noc: interconnect@1700000 {
1650			compatible = "qcom,sm8550-aggre2-noc";
1651			reg = <0 0x01700000 0 0x1e400>;
1652			#interconnect-cells = <2>;
1653			clocks = <&rpmhcc RPMH_IPA_CLK>;
1654			qcom,bcm-voters = <&apps_bcm_voter>;
1655		};
1656
1657		mmss_noc: interconnect@1780000 {
1658			compatible = "qcom,sm8550-mmss-noc";
1659			reg = <0 0x01780000 0 0x5b800>;
1660			#interconnect-cells = <2>;
1661			qcom,bcm-voters = <&apps_bcm_voter>;
1662		};
1663
1664		pcie0: pci@1c00000 {
1665			device_type = "pci";
1666			compatible = "qcom,pcie-sm8550";
1667			reg = <0 0x01c00000 0 0x3000>,
1668			      <0 0x60000000 0 0xf1d>,
1669			      <0 0x60000f20 0 0xa8>,
1670			      <0 0x60001000 0 0x1000>,
1671			      <0 0x60100000 0 0x100000>;
1672			reg-names = "parf", "dbi", "elbi", "atu", "config";
1673			#address-cells = <3>;
1674			#size-cells = <2>;
1675			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
1676				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
1677			bus-range = <0x00 0xff>;
1678
1679			dma-coherent;
1680
1681			linux,pci-domain = <0>;
1682			num-lanes = <2>;
1683
1684			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
1685			interrupt-names = "msi";
1686
1687			#interrupt-cells = <1>;
1688			interrupt-map-mask = <0 0 0 0x7>;
1689			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1690					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1691					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1692					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1693
1694			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
1695				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1696				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
1697				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
1698				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
1699				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
1700				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>;
1701			clock-names = "aux",
1702				      "cfg",
1703				      "bus_master",
1704				      "bus_slave",
1705				      "slave_q2a",
1706				      "ddrss_sf_tbu",
1707				      "noc_aggr";
1708
1709			interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
1710					<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
1711			interconnect-names = "pcie-mem", "cpu-pcie";
1712
1713			iommu-map = <0x0   &apps_smmu 0x1400 0x1>,
1714				    <0x100 &apps_smmu 0x1401 0x1>;
1715
1716			resets = <&gcc GCC_PCIE_0_BCR>;
1717			reset-names = "pci";
1718
1719			power-domains = <&gcc PCIE_0_GDSC>;
1720
1721			phys = <&pcie0_phy>;
1722			phy-names = "pciephy";
1723
1724			status = "disabled";
1725		};
1726
1727		pcie0_phy: phy@1c06000 {
1728			compatible = "qcom,sm8550-qmp-gen3x2-pcie-phy";
1729			reg = <0 0x01c06000 0 0x2000>;
1730
1731			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
1732				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1733				 <&tcsr TCSR_PCIE_0_CLKREF_EN>,
1734				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
1735				 <&gcc GCC_PCIE_0_PIPE_CLK>;
1736			clock-names = "aux", "cfg_ahb", "ref", "rchng",
1737				      "pipe";
1738
1739			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
1740			reset-names = "phy";
1741
1742			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
1743			assigned-clock-rates = <100000000>;
1744
1745			power-domains = <&gcc PCIE_0_PHY_GDSC>;
1746
1747			#clock-cells = <0>;
1748			clock-output-names = "pcie0_pipe_clk";
1749
1750			#phy-cells = <0>;
1751
1752			status = "disabled";
1753		};
1754
1755		pcie1: pci@1c08000 {
1756			device_type = "pci";
1757			compatible = "qcom,pcie-sm8550";
1758			reg = <0x0 0x01c08000 0x0 0x3000>,
1759			      <0x0 0x40000000 0x0 0xf1d>,
1760			      <0x0 0x40000f20 0x0 0xa8>,
1761			      <0x0 0x40001000 0x0 0x1000>,
1762			      <0x0 0x40100000 0x0 0x100000>;
1763			reg-names = "parf", "dbi", "elbi", "atu", "config";
1764			#address-cells = <3>;
1765			#size-cells = <2>;
1766			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
1767				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
1768			bus-range = <0x00 0xff>;
1769
1770			dma-coherent;
1771
1772			linux,pci-domain = <1>;
1773			num-lanes = <2>;
1774
1775			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
1776			interrupt-names = "msi";
1777
1778			#interrupt-cells = <1>;
1779			interrupt-map-mask = <0 0 0 0x7>;
1780			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1781					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1782					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1783					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1784
1785			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
1786				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
1787				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
1788				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
1789				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
1790				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
1791				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
1792				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
1793			clock-names = "aux",
1794				      "cfg",
1795				      "bus_master",
1796				      "bus_slave",
1797				      "slave_q2a",
1798				      "ddrss_sf_tbu",
1799				      "noc_aggr",
1800				      "cnoc_sf_axi";
1801
1802			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
1803			assigned-clock-rates = <19200000>;
1804
1805			interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
1806					<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>;
1807			interconnect-names = "pcie-mem", "cpu-pcie";
1808
1809			iommu-map = <0x0   &apps_smmu 0x1480 0x1>,
1810				    <0x100 &apps_smmu 0x1481 0x1>;
1811
1812			resets = <&gcc GCC_PCIE_1_BCR>,
1813				<&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
1814			reset-names = "pci", "link_down";
1815
1816			power-domains = <&gcc PCIE_1_GDSC>;
1817
1818			phys = <&pcie1_phy>;
1819			phy-names = "pciephy";
1820
1821			status = "disabled";
1822		};
1823
1824		pcie1_phy: phy@1c0e000 {
1825			compatible = "qcom,sm8550-qmp-gen4x2-pcie-phy";
1826			reg = <0x0 0x01c0e000 0x0 0x2000>;
1827
1828			clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
1829				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
1830				 <&tcsr TCSR_PCIE_1_CLKREF_EN>,
1831				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
1832				 <&gcc GCC_PCIE_1_PIPE_CLK>;
1833			clock-names = "aux", "cfg_ahb", "ref", "rchng",
1834				      "pipe";
1835
1836			resets = <&gcc GCC_PCIE_1_PHY_BCR>,
1837				 <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>;
1838			reset-names = "phy", "phy_nocsr";
1839
1840			assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
1841			assigned-clock-rates = <100000000>;
1842
1843			power-domains = <&gcc PCIE_1_PHY_GDSC>;
1844
1845			#clock-cells = <0>;
1846			clock-output-names = "pcie1_pipe_clk";
1847
1848			#phy-cells = <0>;
1849
1850			status = "disabled";
1851		};
1852
1853		cryptobam: dma-controller@1dc4000 {
1854			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
1855			reg = <0x0 0x01dc4000 0x0 0x28000>;
1856			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
1857			#dma-cells = <1>;
1858			qcom,ee = <0>;
1859			qcom,controlled-remotely;
1860			iommus = <&apps_smmu 0x480 0x0>,
1861				 <&apps_smmu 0x481 0x0>;
1862		};
1863
1864		crypto: crypto@1dfa000 {
1865			compatible = "qcom,sm8550-qce", "qcom,sm8150-qce", "qcom,qce";
1866			reg = <0x0 0x01dfa000 0x0 0x6000>;
1867			dmas = <&cryptobam 4>, <&cryptobam 5>;
1868			dma-names = "rx", "tx";
1869			iommus = <&apps_smmu 0x480 0x0>,
1870				 <&apps_smmu 0x481 0x0>;
1871			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
1872			interconnect-names = "memory";
1873		};
1874
1875		ufs_mem_phy: phy@1d80000 {
1876			compatible = "qcom,sm8550-qmp-ufs-phy";
1877			reg = <0x0 0x01d80000 0x0 0x2000>;
1878			clocks = <&tcsr TCSR_UFS_CLKREF_EN>,
1879				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
1880			clock-names = "ref", "ref_aux";
1881
1882			power-domains = <&gcc UFS_MEM_PHY_GDSC>;
1883
1884			resets = <&ufs_mem_hc 0>;
1885			reset-names = "ufsphy";
1886
1887			#clock-cells = <1>;
1888			#phy-cells = <0>;
1889
1890			status = "disabled";
1891		};
1892
1893		ufs_mem_hc: ufs@1d84000 {
1894			compatible = "qcom,sm8550-ufshc", "qcom,ufshc",
1895				     "jedec,ufs-2.0";
1896			reg = <0x0 0x01d84000 0x0 0x3000>;
1897			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
1898			phys = <&ufs_mem_phy>;
1899			phy-names = "ufsphy";
1900			lanes-per-direction = <2>;
1901			#reset-cells = <1>;
1902			resets = <&gcc GCC_UFS_PHY_BCR>;
1903			reset-names = "rst";
1904
1905			power-domains = <&gcc UFS_PHY_GDSC>;
1906			required-opps = <&rpmhpd_opp_nom>;
1907
1908			iommus = <&apps_smmu 0x60 0x0>;
1909			dma-coherent;
1910
1911			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
1912					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
1913
1914			interconnect-names = "ufs-ddr", "cpu-ufs";
1915			clock-names = "core_clk",
1916				      "bus_aggr_clk",
1917				      "iface_clk",
1918				      "core_clk_unipro",
1919				      "ref_clk",
1920				      "tx_lane0_sync_clk",
1921				      "rx_lane0_sync_clk",
1922				      "rx_lane1_sync_clk";
1923			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
1924				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
1925				 <&gcc GCC_UFS_PHY_AHB_CLK>,
1926				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
1927				 <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
1928				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
1929				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
1930				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
1931			freq-table-hz =
1932				<75000000 300000000>,
1933				<0 0>,
1934				<0 0>,
1935				<75000000 300000000>,
1936				<100000000 403000000>,
1937				<0 0>,
1938				<0 0>,
1939				<0 0>;
1940			qcom,ice = <&ice>;
1941
1942			status = "disabled";
1943		};
1944
1945		ice: crypto@1d88000 {
1946			compatible = "qcom,sm8550-inline-crypto-engine",
1947				     "qcom,inline-crypto-engine";
1948			reg = <0 0x01d88000 0 0x8000>;
1949			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
1950		};
1951
1952		tcsr_mutex: hwlock@1f40000 {
1953			compatible = "qcom,tcsr-mutex";
1954			reg = <0 0x01f40000 0 0x20000>;
1955			#hwlock-cells = <1>;
1956		};
1957
1958		tcsr: clock-controller@1fc0000 {
1959			compatible = "qcom,sm8550-tcsr", "syscon";
1960			reg = <0 0x01fc0000 0 0x30000>;
1961			clocks = <&rpmhcc RPMH_CXO_CLK>;
1962			#clock-cells = <1>;
1963			#reset-cells = <1>;
1964		};
1965
1966		gpucc: clock-controller@3d90000 {
1967			compatible = "qcom,sm8550-gpucc";
1968			reg = <0 0x03d90000 0 0xa000>;
1969			clocks = <&bi_tcxo_div2>,
1970				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
1971				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
1972			#clock-cells = <1>;
1973			#reset-cells = <1>;
1974			#power-domain-cells = <1>;
1975		};
1976
1977		remoteproc_mpss: remoteproc@4080000 {
1978			compatible = "qcom,sm8550-mpss-pas";
1979			reg = <0x0 0x04080000 0x0 0x4040>;
1980
1981			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
1982					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
1983					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
1984					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
1985					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
1986					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
1987			interrupt-names = "wdog", "fatal", "ready", "handover",
1988					  "stop-ack", "shutdown-ack";
1989
1990			clocks = <&rpmhcc RPMH_CXO_CLK>;
1991			clock-names = "xo";
1992
1993			power-domains = <&rpmhpd RPMHPD_CX>,
1994					<&rpmhpd RPMHPD_MSS>;
1995			power-domain-names = "cx", "mss";
1996
1997			interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
1998
1999			memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, <&mpss_dsm_mem>;
2000
2001			qcom,qmp = <&aoss_qmp>;
2002
2003			qcom,smem-states = <&smp2p_modem_out 0>;
2004			qcom,smem-state-names = "stop";
2005
2006			status = "disabled";
2007
2008			glink-edge {
2009				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
2010							     IPCC_MPROC_SIGNAL_GLINK_QMP
2011							     IRQ_TYPE_EDGE_RISING>;
2012				mboxes = <&ipcc IPCC_CLIENT_MPSS
2013						IPCC_MPROC_SIGNAL_GLINK_QMP>;
2014				label = "mpss";
2015				qcom,remote-pid = <1>;
2016			};
2017		};
2018
2019		lpass_wsa2macro: codec@6aa0000 {
2020			compatible = "qcom,sm8550-lpass-wsa-macro";
2021			reg = <0 0x06aa0000 0 0x1000>;
2022			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2023				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2024				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2025				 <&lpass_vamacro>;
2026			clock-names = "mclk", "macro", "dcodec", "fsgen";
2027			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2028			assigned-clock-rates = <19200000>;
2029
2030			#clock-cells = <0>;
2031			clock-output-names = "wsa2-mclk";
2032			pinctrl-names = "default";
2033			pinctrl-0 = <&wsa2_swr_active>;
2034			#sound-dai-cells = <1>;
2035		};
2036
2037		swr3: soundwire-controller@6ab0000 {
2038			compatible = "qcom,soundwire-v2.0.0";
2039			reg = <0 0x06ab0000 0 0x10000>;
2040			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
2041			clocks = <&lpass_wsa2macro>;
2042			clock-names = "iface";
2043			label = "WSA2";
2044
2045			qcom,din-ports = <4>;
2046			qcom,dout-ports = <9>;
2047
2048			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
2049			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
2050			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2051			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
2052			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
2053			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
2054			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
2055			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2056			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2057
2058			#address-cells = <2>;
2059			#size-cells = <0>;
2060			#sound-dai-cells = <1>;
2061			status = "disabled";
2062		};
2063
2064		lpass_rxmacro: codec@6ac0000 {
2065			compatible = "qcom,sm8550-lpass-rx-macro";
2066			reg = <0 0x06ac0000 0 0x1000>;
2067			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2068				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2069				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2070				 <&lpass_vamacro>;
2071			clock-names = "mclk", "macro", "dcodec", "fsgen";
2072
2073			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2074			assigned-clock-rates = <19200000>;
2075
2076			#clock-cells = <0>;
2077			clock-output-names = "mclk";
2078			pinctrl-names = "default";
2079			pinctrl-0 = <&rx_swr_active>;
2080			#sound-dai-cells = <1>;
2081		};
2082
2083		swr1: soundwire-controller@6ad0000 {
2084			compatible = "qcom,soundwire-v2.0.0";
2085			reg = <0 0x06ad0000 0 0x10000>;
2086			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
2087			clocks = <&lpass_rxmacro>;
2088			clock-names = "iface";
2089			label = "RX";
2090
2091			qcom,din-ports = <0>;
2092			qcom,dout-ports = <10>;
2093
2094			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
2095			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
2096			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
2097			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
2098			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
2099			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
2100			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
2101			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
2102			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
2103
2104			#address-cells = <2>;
2105			#size-cells = <0>;
2106			#sound-dai-cells = <1>;
2107			status = "disabled";
2108		};
2109
2110		lpass_txmacro: codec@6ae0000 {
2111			compatible = "qcom,sm8550-lpass-tx-macro";
2112			reg = <0 0x06ae0000 0 0x1000>;
2113			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2114				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2115				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2116				 <&lpass_vamacro>;
2117			clock-names = "mclk", "macro", "dcodec", "fsgen";
2118			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2119
2120			assigned-clock-rates = <19200000>;
2121
2122			#clock-cells = <0>;
2123			clock-output-names = "mclk";
2124			pinctrl-names = "default";
2125			pinctrl-0 = <&tx_swr_active>;
2126			#sound-dai-cells = <1>;
2127		};
2128
2129		lpass_wsamacro: codec@6b00000 {
2130			compatible = "qcom,sm8550-lpass-wsa-macro";
2131			reg = <0 0x06b00000 0 0x1000>;
2132			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2133				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2134				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2135				 <&lpass_vamacro>;
2136			clock-names = "mclk", "macro", "dcodec", "fsgen";
2137
2138			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2139			assigned-clock-rates = <19200000>;
2140
2141			#clock-cells = <0>;
2142			clock-output-names = "mclk";
2143			pinctrl-names = "default";
2144			pinctrl-0 = <&wsa_swr_active>;
2145			#sound-dai-cells = <1>;
2146		};
2147
2148		swr0: soundwire-controller@6b10000 {
2149			compatible = "qcom,soundwire-v2.0.0";
2150			reg = <0 0x06b10000 0 0x10000>;
2151			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
2152			clocks = <&lpass_wsamacro>;
2153			clock-names = "iface";
2154			label = "WSA";
2155
2156			qcom,din-ports = <4>;
2157			qcom,dout-ports = <9>;
2158
2159			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
2160			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
2161			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2162			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
2163			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
2164			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
2165			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
2166			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2167			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2168
2169			#address-cells = <2>;
2170			#size-cells = <0>;
2171			#sound-dai-cells = <1>;
2172			status = "disabled";
2173		};
2174
2175		swr2: soundwire-controller@6d30000 {
2176			compatible = "qcom,soundwire-v2.0.0";
2177			reg = <0 0x06d30000 0 0x10000>;
2178			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
2179				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
2180			interrupt-names = "core", "wakeup";
2181			clocks = <&lpass_vamacro>;
2182			clock-names = "iface";
2183			label = "TX";
2184
2185			qcom,din-ports = <4>;
2186			qcom,dout-ports = <0>;
2187			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
2188			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
2189			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
2190			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
2191			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
2192			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
2193			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
2194			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
2195			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
2196
2197			#address-cells = <2>;
2198			#size-cells = <0>;
2199			#sound-dai-cells = <1>;
2200			status = "disabled";
2201		};
2202
2203		lpass_vamacro: codec@6d44000 {
2204			compatible = "qcom,sm8550-lpass-va-macro";
2205			reg = <0 0x06d44000 0 0x1000>;
2206			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2207				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2208				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2209			clock-names = "mclk", "macro", "dcodec";
2210
2211			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2212			assigned-clock-rates = <19200000>;
2213
2214			#clock-cells = <0>;
2215			clock-output-names = "fsgen";
2216			#sound-dai-cells = <1>;
2217		};
2218
2219		lpass_tlmm: pinctrl@6e80000 {
2220			compatible = "qcom,sm8550-lpass-lpi-pinctrl";
2221			reg = <0 0x06e80000 0 0x20000>,
2222			      <0 0x07250000 0 0x10000>;
2223			gpio-controller;
2224			#gpio-cells = <2>;
2225			gpio-ranges = <&lpass_tlmm 0 0 23>;
2226
2227			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2228				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2229			clock-names = "core", "audio";
2230
2231			tx_swr_active: tx-swr-active-state {
2232				clk-pins {
2233					pins = "gpio0";
2234					function = "swr_tx_clk";
2235					drive-strength = <2>;
2236					slew-rate = <1>;
2237					bias-disable;
2238				};
2239
2240				data-pins {
2241					pins = "gpio1", "gpio2", "gpio14";
2242					function = "swr_tx_data";
2243					drive-strength = <2>;
2244					slew-rate = <1>;
2245					bias-bus-hold;
2246				};
2247			};
2248
2249			rx_swr_active: rx-swr-active-state {
2250				clk-pins {
2251					pins = "gpio3";
2252					function = "swr_rx_clk";
2253					drive-strength = <2>;
2254					slew-rate = <1>;
2255					bias-disable;
2256				};
2257
2258				data-pins {
2259					pins = "gpio4", "gpio5";
2260					function = "swr_rx_data";
2261					drive-strength = <2>;
2262					slew-rate = <1>;
2263					bias-bus-hold;
2264				};
2265			};
2266
2267			dmic01_default: dmic01-default-state {
2268				clk-pins {
2269					pins = "gpio6";
2270					function = "dmic1_clk";
2271					drive-strength = <8>;
2272					output-high;
2273				};
2274
2275				data-pins {
2276					pins = "gpio7";
2277					function = "dmic1_data";
2278					drive-strength = <8>;
2279					input-enable;
2280				};
2281			};
2282
2283			dmic02_default: dmic02-default-state {
2284				clk-pins {
2285					pins = "gpio8";
2286					function = "dmic2_clk";
2287					drive-strength = <8>;
2288					output-high;
2289				};
2290
2291				data-pins {
2292					pins = "gpio9";
2293					function = "dmic2_data";
2294					drive-strength = <8>;
2295					input-enable;
2296				};
2297			};
2298
2299			wsa_swr_active: wsa-swr-active-state {
2300				clk-pins {
2301					pins = "gpio10";
2302					function = "wsa_swr_clk";
2303					drive-strength = <2>;
2304					slew-rate = <1>;
2305					bias-disable;
2306				};
2307
2308				data-pins {
2309					pins = "gpio11";
2310					function = "wsa_swr_data";
2311					drive-strength = <2>;
2312					slew-rate = <1>;
2313					bias-bus-hold;
2314				};
2315			};
2316
2317			wsa2_swr_active: wsa2-swr-active-state {
2318				clk-pins {
2319					pins = "gpio15";
2320					function = "wsa2_swr_clk";
2321					drive-strength = <2>;
2322					slew-rate = <1>;
2323					bias-disable;
2324				};
2325
2326				data-pins {
2327					pins = "gpio16";
2328					function = "wsa2_swr_data";
2329					drive-strength = <2>;
2330					slew-rate = <1>;
2331					bias-bus-hold;
2332				};
2333			};
2334		};
2335
2336		lpass_lpiaon_noc: interconnect@7400000 {
2337			compatible = "qcom,sm8550-lpass-lpiaon-noc";
2338			reg = <0 0x07400000 0 0x19080>;
2339			#interconnect-cells = <2>;
2340			qcom,bcm-voters = <&apps_bcm_voter>;
2341		};
2342
2343		lpass_lpicx_noc: interconnect@7430000 {
2344			compatible = "qcom,sm8550-lpass-lpicx-noc";
2345			reg = <0 0x07430000 0 0x3a200>;
2346			#interconnect-cells = <2>;
2347			qcom,bcm-voters = <&apps_bcm_voter>;
2348		};
2349
2350		lpass_ag_noc: interconnect@7e40000 {
2351			compatible = "qcom,sm8550-lpass-ag-noc";
2352			reg = <0 0x07e40000 0 0xe080>;
2353			#interconnect-cells = <2>;
2354			qcom,bcm-voters = <&apps_bcm_voter>;
2355		};
2356
2357		sdhc_2: mmc@8804000 {
2358			compatible = "qcom,sm8550-sdhci", "qcom,sdhci-msm-v5";
2359			reg = <0 0x08804000 0 0x1000>;
2360
2361			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
2362				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
2363			interrupt-names = "hc_irq", "pwr_irq";
2364
2365			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
2366				 <&gcc GCC_SDCC2_APPS_CLK>,
2367				 <&rpmhcc RPMH_CXO_CLK>;
2368			clock-names = "iface", "core", "xo";
2369			iommus = <&apps_smmu 0x540 0>;
2370			qcom,dll-config = <0x0007642c>;
2371			qcom,ddr-config = <0x80040868>;
2372			power-domains = <&rpmhpd RPMHPD_CX>;
2373			operating-points-v2 = <&sdhc2_opp_table>;
2374
2375			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
2376					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
2377			interconnect-names = "sdhc-ddr", "cpu-sdhc";
2378			bus-width = <4>;
2379			dma-coherent;
2380
2381			/* Forbid SDR104/SDR50 - broken hw! */
2382			sdhci-caps-mask = <0x3 0>;
2383
2384			status = "disabled";
2385
2386			sdhc2_opp_table: opp-table {
2387				compatible = "operating-points-v2";
2388
2389				opp-19200000 {
2390					opp-hz = /bits/ 64 <19200000>;
2391					required-opps = <&rpmhpd_opp_min_svs>;
2392				};
2393
2394				opp-50000000 {
2395					opp-hz = /bits/ 64 <50000000>;
2396					required-opps = <&rpmhpd_opp_low_svs>;
2397				};
2398
2399				opp-100000000 {
2400					opp-hz = /bits/ 64 <100000000>;
2401					required-opps = <&rpmhpd_opp_svs>;
2402				};
2403
2404				opp-202000000 {
2405					opp-hz = /bits/ 64 <202000000>;
2406					required-opps = <&rpmhpd_opp_svs_l1>;
2407				};
2408			};
2409		};
2410
2411		videocc: clock-controller@aaf0000 {
2412			compatible = "qcom,sm8550-videocc";
2413			reg = <0 0x0aaf0000 0 0x10000>;
2414			clocks = <&bi_tcxo_div2>,
2415				 <&gcc GCC_VIDEO_AHB_CLK>;
2416			power-domains = <&rpmhpd RPMHPD_MMCX>;
2417			required-opps = <&rpmhpd_opp_low_svs>;
2418			#clock-cells = <1>;
2419			#reset-cells = <1>;
2420			#power-domain-cells = <1>;
2421		};
2422
2423		mdss: display-subsystem@ae00000 {
2424			compatible = "qcom,sm8550-mdss";
2425			reg = <0 0x0ae00000 0 0x1000>;
2426			reg-names = "mdss";
2427
2428			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
2429			interrupt-controller;
2430			#interrupt-cells = <1>;
2431
2432			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
2433				 <&gcc GCC_DISP_AHB_CLK>,
2434				 <&gcc GCC_DISP_HF_AXI_CLK>,
2435				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
2436
2437			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
2438
2439			power-domains = <&dispcc MDSS_GDSC>;
2440
2441			interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
2442					<&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
2443			interconnect-names = "mdp0-mem", "mdp1-mem";
2444
2445			iommus = <&apps_smmu 0x1c00 0x2>;
2446
2447			#address-cells = <2>;
2448			#size-cells = <2>;
2449			ranges;
2450
2451			status = "disabled";
2452
2453			mdss_mdp: display-controller@ae01000 {
2454				compatible = "qcom,sm8550-dpu";
2455				reg = <0 0x0ae01000 0 0x8f000>,
2456				      <0 0x0aeb0000 0 0x2008>;
2457				reg-names = "mdp", "vbif";
2458
2459				interrupt-parent = <&mdss>;
2460				interrupts = <0>;
2461
2462				clocks = <&gcc GCC_DISP_AHB_CLK>,
2463					 <&gcc GCC_DISP_HF_AXI_CLK>,
2464					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
2465					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
2466					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
2467					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
2468				clock-names = "bus",
2469					      "nrt_bus",
2470					      "iface",
2471					      "lut",
2472					      "core",
2473					      "vsync";
2474
2475				power-domains = <&rpmhpd RPMHPD_MMCX>;
2476
2477				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
2478				assigned-clock-rates = <19200000>;
2479
2480				operating-points-v2 = <&mdp_opp_table>;
2481
2482				ports {
2483					#address-cells = <1>;
2484					#size-cells = <0>;
2485
2486					port@0 {
2487						reg = <0>;
2488						dpu_intf1_out: endpoint {
2489							remote-endpoint = <&mdss_dsi0_in>;
2490						};
2491					};
2492
2493					port@1 {
2494						reg = <1>;
2495						dpu_intf2_out: endpoint {
2496							remote-endpoint = <&mdss_dsi1_in>;
2497						};
2498					};
2499
2500					port@2 {
2501						reg = <2>;
2502						dpu_intf0_out: endpoint {
2503							remote-endpoint = <&mdss_dp0_in>;
2504						};
2505					};
2506				};
2507
2508				mdp_opp_table: opp-table {
2509					compatible = "operating-points-v2";
2510
2511					opp-200000000 {
2512						opp-hz = /bits/ 64 <200000000>;
2513						required-opps = <&rpmhpd_opp_low_svs>;
2514					};
2515
2516					opp-325000000 {
2517						opp-hz = /bits/ 64 <325000000>;
2518						required-opps = <&rpmhpd_opp_svs>;
2519					};
2520
2521					opp-375000000 {
2522						opp-hz = /bits/ 64 <375000000>;
2523						required-opps = <&rpmhpd_opp_svs_l1>;
2524					};
2525
2526					opp-514000000 {
2527						opp-hz = /bits/ 64 <514000000>;
2528						required-opps = <&rpmhpd_opp_nom>;
2529					};
2530				};
2531			};
2532
2533			mdss_dp0: displayport-controller@ae90000 {
2534				compatible = "qcom,sm8550-dp", "qcom,sm8350-dp";
2535				reg = <0 0xae90000 0 0x200>,
2536				      <0 0xae90200 0 0x200>,
2537				      <0 0xae90400 0 0xc00>,
2538				      <0 0xae91000 0 0x400>,
2539				      <0 0xae91400 0 0x400>;
2540				interrupt-parent = <&mdss>;
2541				interrupts = <12>;
2542				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
2543					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
2544					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
2545					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
2546					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
2547				clock-names = "core_iface",
2548					      "core_aux",
2549					      "ctrl_link",
2550					      "ctrl_link_iface",
2551					      "stream_pixel";
2552
2553				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
2554						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
2555				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
2556							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
2557
2558				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
2559				phy-names = "dp";
2560
2561				#sound-dai-cells = <0>;
2562
2563				operating-points-v2 = <&dp_opp_table>;
2564				power-domains = <&rpmhpd RPMHPD_MMCX>;
2565
2566				status = "disabled";
2567
2568				ports {
2569					#address-cells = <1>;
2570					#size-cells = <0>;
2571
2572					port@0 {
2573						reg = <0>;
2574						mdss_dp0_in: endpoint {
2575							remote-endpoint = <&dpu_intf0_out>;
2576						};
2577					};
2578
2579					port@1 {
2580						reg = <1>;
2581						mdss_dp0_out: endpoint {
2582						};
2583					};
2584				};
2585
2586				dp_opp_table: opp-table {
2587					compatible = "operating-points-v2";
2588
2589					opp-162000000 {
2590						opp-hz = /bits/ 64 <162000000>;
2591						required-opps = <&rpmhpd_opp_low_svs_d1>;
2592					};
2593
2594					opp-270000000 {
2595						opp-hz = /bits/ 64 <270000000>;
2596						required-opps = <&rpmhpd_opp_low_svs>;
2597					};
2598
2599					opp-540000000 {
2600						opp-hz = /bits/ 64 <540000000>;
2601						required-opps = <&rpmhpd_opp_svs_l1>;
2602					};
2603
2604					opp-810000000 {
2605						opp-hz = /bits/ 64 <810000000>;
2606						required-opps = <&rpmhpd_opp_nom>;
2607					};
2608				};
2609			};
2610
2611			mdss_dsi0: dsi@ae94000 {
2612				compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
2613				reg = <0 0x0ae94000 0 0x400>;
2614				reg-names = "dsi_ctrl";
2615
2616				interrupt-parent = <&mdss>;
2617				interrupts = <4>;
2618
2619				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
2620					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
2621					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
2622					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
2623					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
2624					 <&gcc GCC_DISP_HF_AXI_CLK>;
2625				clock-names = "byte",
2626					      "byte_intf",
2627					      "pixel",
2628					      "core",
2629					      "iface",
2630					      "bus";
2631
2632				power-domains = <&rpmhpd RPMHPD_MMCX>;
2633
2634				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
2635						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
2636				assigned-clock-parents = <&mdss_dsi0_phy 0>,
2637							 <&mdss_dsi0_phy 1>;
2638
2639				operating-points-v2 = <&mdss_dsi_opp_table>;
2640
2641				phys = <&mdss_dsi0_phy>;
2642				phy-names = "dsi";
2643
2644				#address-cells = <1>;
2645				#size-cells = <0>;
2646
2647				status = "disabled";
2648
2649				ports {
2650					#address-cells = <1>;
2651					#size-cells = <0>;
2652
2653					port@0 {
2654						reg = <0>;
2655						mdss_dsi0_in: endpoint {
2656							remote-endpoint = <&dpu_intf1_out>;
2657						};
2658					};
2659
2660					port@1 {
2661						reg = <1>;
2662						mdss_dsi0_out: endpoint {
2663						};
2664					};
2665				};
2666
2667				mdss_dsi_opp_table: opp-table {
2668					compatible = "operating-points-v2";
2669
2670					opp-187500000 {
2671						opp-hz = /bits/ 64 <187500000>;
2672						required-opps = <&rpmhpd_opp_low_svs>;
2673					};
2674
2675					opp-300000000 {
2676						opp-hz = /bits/ 64 <300000000>;
2677						required-opps = <&rpmhpd_opp_svs>;
2678					};
2679
2680					opp-358000000 {
2681						opp-hz = /bits/ 64 <358000000>;
2682						required-opps = <&rpmhpd_opp_svs_l1>;
2683					};
2684				};
2685			};
2686
2687			mdss_dsi0_phy: phy@ae95000 {
2688				compatible = "qcom,sm8550-dsi-phy-4nm";
2689				reg = <0 0x0ae95000 0 0x200>,
2690				      <0 0x0ae95200 0 0x280>,
2691				      <0 0x0ae95500 0 0x400>;
2692				reg-names = "dsi_phy",
2693					    "dsi_phy_lane",
2694					    "dsi_pll";
2695
2696				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
2697					 <&rpmhcc RPMH_CXO_CLK>;
2698				clock-names = "iface", "ref";
2699
2700				#clock-cells = <1>;
2701				#phy-cells = <0>;
2702
2703				status = "disabled";
2704			};
2705
2706			mdss_dsi1: dsi@ae96000 {
2707				compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
2708				reg = <0 0x0ae96000 0 0x400>;
2709				reg-names = "dsi_ctrl";
2710
2711				interrupt-parent = <&mdss>;
2712				interrupts = <5>;
2713
2714				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
2715					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
2716					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
2717					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
2718					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
2719					 <&gcc GCC_DISP_HF_AXI_CLK>;
2720				clock-names = "byte",
2721					      "byte_intf",
2722					      "pixel",
2723					      "core",
2724					      "iface",
2725					      "bus";
2726
2727				power-domains = <&rpmhpd RPMHPD_MMCX>;
2728
2729				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
2730						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
2731				assigned-clock-parents = <&mdss_dsi1_phy 0>,
2732							 <&mdss_dsi1_phy 1>;
2733
2734				operating-points-v2 = <&mdss_dsi_opp_table>;
2735
2736				phys = <&mdss_dsi1_phy>;
2737				phy-names = "dsi";
2738
2739				#address-cells = <1>;
2740				#size-cells = <0>;
2741
2742				status = "disabled";
2743
2744				ports {
2745					#address-cells = <1>;
2746					#size-cells = <0>;
2747
2748					port@0 {
2749						reg = <0>;
2750						mdss_dsi1_in: endpoint {
2751							remote-endpoint = <&dpu_intf2_out>;
2752						};
2753					};
2754
2755					port@1 {
2756						reg = <1>;
2757						mdss_dsi1_out: endpoint {
2758						};
2759					};
2760				};
2761			};
2762
2763			mdss_dsi1_phy: phy@ae97000 {
2764				compatible = "qcom,sm8550-dsi-phy-4nm";
2765				reg = <0 0x0ae97000 0 0x200>,
2766				      <0 0x0ae97200 0 0x280>,
2767				      <0 0x0ae97500 0 0x400>;
2768				reg-names = "dsi_phy",
2769					    "dsi_phy_lane",
2770					    "dsi_pll";
2771
2772				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
2773					 <&rpmhcc RPMH_CXO_CLK>;
2774				clock-names = "iface", "ref";
2775
2776				#clock-cells = <1>;
2777				#phy-cells = <0>;
2778
2779				status = "disabled";
2780			};
2781		};
2782
2783		dispcc: clock-controller@af00000 {
2784			compatible = "qcom,sm8550-dispcc";
2785			reg = <0 0x0af00000 0 0x20000>;
2786			clocks = <&bi_tcxo_div2>,
2787				 <&bi_tcxo_ao_div2>,
2788				 <&gcc GCC_DISP_AHB_CLK>,
2789				 <&sleep_clk>,
2790				 <&mdss_dsi0_phy 0>,
2791				 <&mdss_dsi0_phy 1>,
2792				 <&mdss_dsi1_phy 0>,
2793				 <&mdss_dsi1_phy 1>,
2794				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
2795				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
2796				 <0>, /* dp1 */
2797				 <0>,
2798				 <0>, /* dp2 */
2799				 <0>,
2800				 <0>, /* dp3 */
2801				 <0>;
2802			power-domains = <&rpmhpd RPMHPD_MMCX>;
2803			required-opps = <&rpmhpd_opp_low_svs>;
2804			#clock-cells = <1>;
2805			#reset-cells = <1>;
2806			#power-domain-cells = <1>;
2807		};
2808
2809		usb_1_hsphy: phy@88e3000 {
2810			compatible = "qcom,sm8550-snps-eusb2-phy";
2811			reg = <0x0 0x088e3000 0x0 0x154>;
2812			#phy-cells = <0>;
2813
2814			clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
2815			clock-names = "ref";
2816
2817			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
2818
2819			status = "disabled";
2820		};
2821
2822		usb_dp_qmpphy: phy@88e8000 {
2823			compatible = "qcom,sm8550-qmp-usb3-dp-phy";
2824			reg = <0x0 0x088e8000 0x0 0x3000>;
2825
2826			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
2827				 <&rpmhcc RPMH_CXO_CLK>,
2828				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
2829				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
2830			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
2831
2832			power-domains = <&gcc USB3_PHY_GDSC>;
2833
2834			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
2835				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
2836			reset-names = "phy", "common";
2837
2838			#clock-cells = <1>;
2839			#phy-cells = <1>;
2840
2841			status = "disabled";
2842
2843			ports {
2844				#address-cells = <1>;
2845				#size-cells = <0>;
2846
2847				port@0 {
2848					reg = <0>;
2849
2850					usb_dp_qmpphy_out: endpoint {
2851					};
2852				};
2853
2854				port@1 {
2855					reg = <1>;
2856
2857					usb_dp_qmpphy_usb_ss_in: endpoint {
2858					};
2859				};
2860
2861				port@2 {
2862					reg = <2>;
2863
2864					usb_dp_qmpphy_dp_in: endpoint {
2865					};
2866				};
2867			};
2868		};
2869
2870		usb_1: usb@a6f8800 {
2871			compatible = "qcom,sm8550-dwc3", "qcom,dwc3";
2872			reg = <0x0 0x0a6f8800 0x0 0x400>;
2873			#address-cells = <2>;
2874			#size-cells = <2>;
2875			ranges;
2876
2877			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
2878				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
2879				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
2880				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
2881				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
2882				 <&tcsr TCSR_USB3_CLKREF_EN>;
2883			clock-names = "cfg_noc",
2884				      "core",
2885				      "iface",
2886				      "sleep",
2887				      "mock_utmi",
2888				      "xo";
2889
2890			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
2891					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
2892			assigned-clock-rates = <19200000>, <200000000>;
2893
2894			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
2895					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
2896					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
2897					      <&pdc 14 IRQ_TYPE_EDGE_RISING>;
2898			interrupt-names = "hs_phy_irq",
2899					  "ss_phy_irq",
2900					  "dm_hs_phy_irq",
2901					  "dp_hs_phy_irq";
2902
2903			power-domains = <&gcc USB30_PRIM_GDSC>;
2904			required-opps = <&rpmhpd_opp_nom>;
2905
2906			resets = <&gcc GCC_USB30_PRIM_BCR>;
2907
2908			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
2909					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
2910			interconnect-names = "usb-ddr", "apps-usb";
2911
2912			status = "disabled";
2913
2914			usb_1_dwc3: usb@a600000 {
2915				compatible = "snps,dwc3";
2916				reg = <0x0 0x0a600000 0x0 0xcd00>;
2917				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
2918				iommus = <&apps_smmu 0x40 0x0>;
2919				snps,dis_u2_susphy_quirk;
2920				snps,dis_enblslpm_quirk;
2921				snps,usb3_lpm_capable;
2922				phys = <&usb_1_hsphy>,
2923				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
2924				phy-names = "usb2-phy", "usb3-phy";
2925
2926				ports {
2927					#address-cells = <1>;
2928					#size-cells = <0>;
2929
2930					port@0 {
2931						reg = <0>;
2932
2933						usb_1_dwc3_hs: endpoint {
2934						};
2935					};
2936
2937					port@1 {
2938						reg = <1>;
2939
2940						usb_1_dwc3_ss: endpoint {
2941						};
2942					};
2943				};
2944			};
2945		};
2946
2947		pdc: interrupt-controller@b220000 {
2948			compatible = "qcom,sm8550-pdc", "qcom,pdc";
2949			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
2950			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
2951					  <125 63 1>, <126 716 12>,
2952					  <138 251 5>;
2953			#interrupt-cells = <2>;
2954			interrupt-parent = <&intc>;
2955			interrupt-controller;
2956		};
2957
2958		tsens0: thermal-sensor@c271000 {
2959			compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
2960			reg = <0 0x0c271000 0 0x1000>, /* TM */
2961			      <0 0x0c222000 0 0x1000>; /* SROT */
2962			#qcom,sensors = <16>;
2963			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
2964				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
2965			interrupt-names = "uplow", "critical";
2966			#thermal-sensor-cells = <1>;
2967		};
2968
2969		tsens1: thermal-sensor@c272000 {
2970			compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
2971			reg = <0 0x0c272000 0 0x1000>, /* TM */
2972			      <0 0x0c223000 0 0x1000>; /* SROT */
2973			#qcom,sensors = <16>;
2974			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
2975				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
2976			interrupt-names = "uplow", "critical";
2977			#thermal-sensor-cells = <1>;
2978		};
2979
2980		tsens2: thermal-sensor@c273000 {
2981			compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
2982			reg = <0 0x0c273000 0 0x1000>, /* TM */
2983			      <0 0x0c224000 0 0x1000>; /* SROT */
2984			#qcom,sensors = <16>;
2985			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
2986				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
2987			interrupt-names = "uplow", "critical";
2988			#thermal-sensor-cells = <1>;
2989		};
2990
2991		aoss_qmp: power-management@c300000 {
2992			compatible = "qcom,sm8550-aoss-qmp", "qcom,aoss-qmp";
2993			reg = <0 0x0c300000 0 0x400>;
2994			interrupt-parent = <&ipcc>;
2995			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
2996						     IRQ_TYPE_EDGE_RISING>;
2997			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
2998
2999			#clock-cells = <0>;
3000		};
3001
3002		sram@c3f0000 {
3003			compatible = "qcom,rpmh-stats";
3004			reg = <0 0x0c3f0000 0 0x400>;
3005		};
3006
3007		spmi_bus: spmi@c400000 {
3008			compatible = "qcom,spmi-pmic-arb";
3009			reg = <0 0x0c400000 0 0x3000>,
3010			      <0 0x0c500000 0 0x4000000>,
3011			      <0 0x0c440000 0 0x80000>,
3012			      <0 0x0c4c0000 0 0x20000>,
3013			      <0 0x0c42d000 0 0x4000>;
3014			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
3015			interrupt-names = "periph_irq";
3016			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
3017			qcom,ee = <0>;
3018			qcom,channel = <0>;
3019			qcom,bus-id = <0>;
3020			#address-cells = <2>;
3021			#size-cells = <0>;
3022			interrupt-controller;
3023			#interrupt-cells = <4>;
3024		};
3025
3026		tlmm: pinctrl@f100000 {
3027			compatible = "qcom,sm8550-tlmm";
3028			reg = <0 0x0f100000 0 0x300000>;
3029			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
3030			gpio-controller;
3031			#gpio-cells = <2>;
3032			interrupt-controller;
3033			#interrupt-cells = <2>;
3034			gpio-ranges = <&tlmm 0 0 211>;
3035			wakeup-parent = <&pdc>;
3036
3037			hub_i2c0_data_clk: hub-i2c0-data-clk-state {
3038				/* SDA, SCL */
3039				pins = "gpio16", "gpio17";
3040				function = "i2chub0_se0";
3041				drive-strength = <2>;
3042				bias-pull-up;
3043			};
3044
3045			hub_i2c1_data_clk: hub-i2c1-data-clk-state {
3046				/* SDA, SCL */
3047				pins = "gpio18", "gpio19";
3048				function = "i2chub0_se1";
3049				drive-strength = <2>;
3050				bias-pull-up;
3051			};
3052
3053			hub_i2c2_data_clk: hub-i2c2-data-clk-state {
3054				/* SDA, SCL */
3055				pins = "gpio20", "gpio21";
3056				function = "i2chub0_se2";
3057				drive-strength = <2>;
3058				bias-pull-up;
3059			};
3060
3061			hub_i2c3_data_clk: hub-i2c3-data-clk-state {
3062				/* SDA, SCL */
3063				pins = "gpio22", "gpio23";
3064				function = "i2chub0_se3";
3065				drive-strength = <2>;
3066				bias-pull-up;
3067			};
3068
3069			hub_i2c4_data_clk: hub-i2c4-data-clk-state {
3070				/* SDA, SCL */
3071				pins = "gpio4", "gpio5";
3072				function = "i2chub0_se4";
3073				drive-strength = <2>;
3074				bias-pull-up;
3075			};
3076
3077			hub_i2c5_data_clk: hub-i2c5-data-clk-state {
3078				/* SDA, SCL */
3079				pins = "gpio6", "gpio7";
3080				function = "i2chub0_se5";
3081				drive-strength = <2>;
3082				bias-pull-up;
3083			};
3084
3085			hub_i2c6_data_clk: hub-i2c6-data-clk-state {
3086				/* SDA, SCL */
3087				pins = "gpio8", "gpio9";
3088				function = "i2chub0_se6";
3089				drive-strength = <2>;
3090				bias-pull-up;
3091			};
3092
3093			hub_i2c7_data_clk: hub-i2c7-data-clk-state {
3094				/* SDA, SCL */
3095				pins = "gpio10", "gpio11";
3096				function = "i2chub0_se7";
3097				drive-strength = <2>;
3098				bias-pull-up;
3099			};
3100
3101			hub_i2c8_data_clk: hub-i2c8-data-clk-state {
3102				/* SDA, SCL */
3103				pins = "gpio206", "gpio207";
3104				function = "i2chub0_se8";
3105				drive-strength = <2>;
3106				bias-pull-up;
3107			};
3108
3109			hub_i2c9_data_clk: hub-i2c9-data-clk-state {
3110				/* SDA, SCL */
3111				pins = "gpio84", "gpio85";
3112				function = "i2chub0_se9";
3113				drive-strength = <2>;
3114				bias-pull-up;
3115			};
3116
3117			pcie0_default_state: pcie0-default-state {
3118				perst-pins {
3119					pins = "gpio94";
3120					function = "gpio";
3121					drive-strength = <2>;
3122					bias-pull-down;
3123				};
3124
3125				clkreq-pins {
3126					pins = "gpio95";
3127					function = "pcie0_clk_req_n";
3128					drive-strength = <2>;
3129					bias-pull-up;
3130				};
3131
3132				wake-pins {
3133					pins = "gpio96";
3134					function = "gpio";
3135					drive-strength = <2>;
3136					bias-pull-up;
3137				};
3138			};
3139
3140			pcie1_default_state: pcie1-default-state {
3141				perst-pins {
3142					pins = "gpio97";
3143					function = "gpio";
3144					drive-strength = <2>;
3145					bias-pull-down;
3146				};
3147
3148				clkreq-pins {
3149					pins = "gpio98";
3150					function = "pcie1_clk_req_n";
3151					drive-strength = <2>;
3152					bias-pull-up;
3153				};
3154
3155				wake-pins {
3156					pins = "gpio99";
3157					function = "gpio";
3158					drive-strength = <2>;
3159					bias-pull-up;
3160				};
3161			};
3162
3163			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
3164				/* SDA, SCL */
3165				pins = "gpio28", "gpio29";
3166				function = "qup1_se0";
3167				drive-strength = <2>;
3168				bias-pull-up = <2200>;
3169			};
3170
3171			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
3172				/* SDA, SCL */
3173				pins = "gpio32", "gpio33";
3174				function = "qup1_se1";
3175				drive-strength = <2>;
3176				bias-pull-up = <2200>;
3177			};
3178
3179			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
3180				/* SDA, SCL */
3181				pins = "gpio36", "gpio37";
3182				function = "qup1_se2";
3183				drive-strength = <2>;
3184				bias-pull-up = <2200>;
3185			};
3186
3187			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
3188				/* SDA, SCL */
3189				pins = "gpio40", "gpio41";
3190				function = "qup1_se3";
3191				drive-strength = <2>;
3192				bias-pull-up = <2200>;
3193			};
3194
3195			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
3196				/* SDA, SCL */
3197				pins = "gpio44", "gpio45";
3198				function = "qup1_se4";
3199				drive-strength = <2>;
3200				bias-pull-up = <2200>;
3201			};
3202
3203			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
3204				/* SDA, SCL */
3205				pins = "gpio52", "gpio53";
3206				function = "qup1_se5";
3207				drive-strength = <2>;
3208				bias-pull-up = <2200>;
3209			};
3210
3211			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
3212				/* SDA, SCL */
3213				pins = "gpio48", "gpio49";
3214				function = "qup1_se6";
3215				drive-strength = <2>;
3216				bias-pull-up = <2200>;
3217			};
3218
3219			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
3220				scl-pins {
3221					pins = "gpio57";
3222					function = "qup2_se0_l1_mira";
3223					drive-strength = <2>;
3224					bias-pull-up = <2200>;
3225				};
3226
3227				sda-pins {
3228					pins = "gpio56";
3229					function = "qup2_se0_l0_mira";
3230					drive-strength = <2>;
3231					bias-pull-up = <2200>;
3232				};
3233			};
3234
3235			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
3236				/* SDA, SCL */
3237				pins = "gpio60", "gpio61";
3238				function = "qup2_se1";
3239				drive-strength = <2>;
3240				bias-pull-up = <2200>;
3241			};
3242
3243			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
3244				/* SDA, SCL */
3245				pins = "gpio64", "gpio65";
3246				function = "qup2_se2";
3247				drive-strength = <2>;
3248				bias-pull-up = <2200>;
3249			};
3250
3251			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
3252				/* SDA, SCL */
3253				pins = "gpio68", "gpio69";
3254				function = "qup2_se3";
3255				drive-strength = <2>;
3256				bias-pull-up = <2200>;
3257			};
3258
3259			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
3260				/* SDA, SCL */
3261				pins = "gpio2", "gpio3";
3262				function = "qup2_se4";
3263				drive-strength = <2>;
3264				bias-pull-up = <2200>;
3265			};
3266
3267			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
3268				/* SDA, SCL */
3269				pins = "gpio80", "gpio81";
3270				function = "qup2_se5";
3271				drive-strength = <2>;
3272				bias-pull-up = <2200>;
3273			};
3274
3275			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
3276				/* SDA, SCL */
3277				pins = "gpio72", "gpio106";
3278				function = "qup2_se7";
3279				drive-strength = <2>;
3280				bias-pull-up = <2200>;
3281			};
3282
3283			qup_spi0_cs: qup-spi0-cs-state {
3284				pins = "gpio31";
3285				function = "qup1_se0";
3286				drive-strength = <6>;
3287				bias-disable;
3288			};
3289
3290			qup_spi0_data_clk: qup-spi0-data-clk-state {
3291				/* MISO, MOSI, CLK */
3292				pins = "gpio28", "gpio29", "gpio30";
3293				function = "qup1_se0";
3294				drive-strength = <6>;
3295				bias-disable;
3296			};
3297
3298			qup_spi1_cs: qup-spi1-cs-state {
3299				pins = "gpio35";
3300				function = "qup1_se1";
3301				drive-strength = <6>;
3302				bias-disable;
3303			};
3304
3305			qup_spi1_data_clk: qup-spi1-data-clk-state {
3306				/* MISO, MOSI, CLK */
3307				pins = "gpio32", "gpio33", "gpio34";
3308				function = "qup1_se1";
3309				drive-strength = <6>;
3310				bias-disable;
3311			};
3312
3313			qup_spi2_cs: qup-spi2-cs-state {
3314				pins = "gpio39";
3315				function = "qup1_se2";
3316				drive-strength = <6>;
3317				bias-disable;
3318			};
3319
3320			qup_spi2_data_clk: qup-spi2-data-clk-state {
3321				/* MISO, MOSI, CLK */
3322				pins = "gpio36", "gpio37", "gpio38";
3323				function = "qup1_se2";
3324				drive-strength = <6>;
3325				bias-disable;
3326			};
3327
3328			qup_spi3_cs: qup-spi3-cs-state {
3329				pins = "gpio43";
3330				function = "qup1_se3";
3331				drive-strength = <6>;
3332				bias-disable;
3333			};
3334
3335			qup_spi3_data_clk: qup-spi3-data-clk-state {
3336				/* MISO, MOSI, CLK */
3337				pins = "gpio40", "gpio41", "gpio42";
3338				function = "qup1_se3";
3339				drive-strength = <6>;
3340				bias-disable;
3341			};
3342
3343			qup_spi4_cs: qup-spi4-cs-state {
3344				pins = "gpio47";
3345				function = "qup1_se4";
3346				drive-strength = <6>;
3347				bias-disable;
3348			};
3349
3350			qup_spi4_data_clk: qup-spi4-data-clk-state {
3351				/* MISO, MOSI, CLK */
3352				pins = "gpio44", "gpio45", "gpio46";
3353				function = "qup1_se4";
3354				drive-strength = <6>;
3355				bias-disable;
3356			};
3357
3358			qup_spi5_cs: qup-spi5-cs-state {
3359				pins = "gpio55";
3360				function = "qup1_se5";
3361				drive-strength = <6>;
3362				bias-disable;
3363			};
3364
3365			qup_spi5_data_clk: qup-spi5-data-clk-state {
3366				/* MISO, MOSI, CLK */
3367				pins = "gpio52", "gpio53", "gpio54";
3368				function = "qup1_se5";
3369				drive-strength = <6>;
3370				bias-disable;
3371			};
3372
3373			qup_spi6_cs: qup-spi6-cs-state {
3374				pins = "gpio51";
3375				function = "qup1_se6";
3376				drive-strength = <6>;
3377				bias-disable;
3378			};
3379
3380			qup_spi6_data_clk: qup-spi6-data-clk-state {
3381				/* MISO, MOSI, CLK */
3382				pins = "gpio48", "gpio49", "gpio50";
3383				function = "qup1_se6";
3384				drive-strength = <6>;
3385				bias-disable;
3386			};
3387
3388			qup_spi8_cs: qup-spi8-cs-state {
3389				pins = "gpio59";
3390				function = "qup2_se0_l3_mira";
3391				drive-strength = <6>;
3392				bias-disable;
3393			};
3394
3395			qup_spi8_data_clk: qup-spi8-data-clk-state {
3396				/* MISO, MOSI, CLK */
3397				pins = "gpio56", "gpio57", "gpio58";
3398				function = "qup2_se0_l2_mira";
3399				drive-strength = <6>;
3400				bias-disable;
3401			};
3402
3403			qup_spi9_cs: qup-spi9-cs-state {
3404				pins = "gpio63";
3405				function = "qup2_se1";
3406				drive-strength = <6>;
3407				bias-disable;
3408			};
3409
3410			qup_spi9_data_clk: qup-spi9-data-clk-state {
3411				/* MISO, MOSI, CLK */
3412				pins = "gpio60", "gpio61", "gpio62";
3413				function = "qup2_se1";
3414				drive-strength = <6>;
3415				bias-disable;
3416			};
3417
3418			qup_spi10_cs: qup-spi10-cs-state {
3419				pins = "gpio67";
3420				function = "qup2_se2";
3421				drive-strength = <6>;
3422				bias-disable;
3423			};
3424
3425			qup_spi10_data_clk: qup-spi10-data-clk-state {
3426				/* MISO, MOSI, CLK */
3427				pins = "gpio64", "gpio65", "gpio66";
3428				function = "qup2_se2";
3429				drive-strength = <6>;
3430				bias-disable;
3431			};
3432
3433			qup_spi11_cs: qup-spi11-cs-state {
3434				pins = "gpio71";
3435				function = "qup2_se3";
3436				drive-strength = <6>;
3437				bias-disable;
3438			};
3439
3440			qup_spi11_data_clk: qup-spi11-data-clk-state {
3441				/* MISO, MOSI, CLK */
3442				pins = "gpio68", "gpio69", "gpio70";
3443				function = "qup2_se3";
3444				drive-strength = <6>;
3445				bias-disable;
3446			};
3447
3448			qup_spi12_cs: qup-spi12-cs-state {
3449				pins = "gpio119";
3450				function = "qup2_se4";
3451				drive-strength = <6>;
3452				bias-disable;
3453			};
3454
3455			qup_spi12_data_clk: qup-spi12-data-clk-state {
3456				/* MISO, MOSI, CLK */
3457				pins = "gpio2", "gpio3", "gpio118";
3458				function = "qup2_se4";
3459				drive-strength = <6>;
3460				bias-disable;
3461			};
3462
3463			qup_spi13_cs: qup-spi13-cs-state {
3464				pins = "gpio83";
3465				function = "qup2_se5";
3466				drive-strength = <6>;
3467				bias-disable;
3468			};
3469
3470			qup_spi13_data_clk: qup-spi13-data-clk-state {
3471				/* MISO, MOSI, CLK */
3472				pins = "gpio80", "gpio81", "gpio82";
3473				function = "qup2_se5";
3474				drive-strength = <6>;
3475				bias-disable;
3476			};
3477
3478			qup_spi15_cs: qup-spi15-cs-state {
3479				pins = "gpio75";
3480				function = "qup2_se7";
3481				drive-strength = <6>;
3482				bias-disable;
3483			};
3484
3485			qup_spi15_data_clk: qup-spi15-data-clk-state {
3486				/* MISO, MOSI, CLK */
3487				pins = "gpio72", "gpio106", "gpio74";
3488				function = "qup2_se7";
3489				drive-strength = <6>;
3490				bias-disable;
3491			};
3492
3493			qup_uart7_default: qup-uart7-default-state {
3494				/* TX, RX */
3495				pins = "gpio26", "gpio27";
3496				function = "qup1_se7";
3497				drive-strength = <2>;
3498				bias-disable;
3499			};
3500
3501			sdc2_sleep: sdc2-sleep-state {
3502				clk-pins {
3503					pins = "sdc2_clk";
3504					bias-disable;
3505					drive-strength = <2>;
3506				};
3507
3508				cmd-pins {
3509					pins = "sdc2_cmd";
3510					bias-pull-up;
3511					drive-strength = <2>;
3512				};
3513
3514				data-pins {
3515					pins = "sdc2_data";
3516					bias-pull-up;
3517					drive-strength = <2>;
3518				};
3519			};
3520
3521			sdc2_default: sdc2-default-state {
3522				clk-pins {
3523					pins = "sdc2_clk";
3524					bias-disable;
3525					drive-strength = <16>;
3526				};
3527
3528				cmd-pins {
3529					pins = "sdc2_cmd";
3530					bias-pull-up;
3531					drive-strength = <10>;
3532				};
3533
3534				data-pins {
3535					pins = "sdc2_data";
3536					bias-pull-up;
3537					drive-strength = <10>;
3538				};
3539			};
3540		};
3541
3542		apps_smmu: iommu@15000000 {
3543			compatible = "qcom,sm8550-smmu-500", "qcom,smmu-500", "arm,mmu-500";
3544			reg = <0 0x15000000 0 0x100000>;
3545			#iommu-cells = <2>;
3546			#global-interrupts = <1>;
3547			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
3548				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
3549				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
3550				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
3551				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
3552				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
3553				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
3554				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
3555				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
3556				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
3557				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
3558				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
3559				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
3560				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
3561				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
3562				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
3563				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
3564				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
3565				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
3566				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
3567				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
3568				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
3569				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
3570				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
3571				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
3572				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
3573				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
3574				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
3575				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
3576				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
3577				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
3578				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
3579				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
3580				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
3581				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
3582				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
3583				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
3584				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
3585				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
3586				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
3587				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
3588				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
3589				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
3590				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
3591				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
3592				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
3593				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
3594				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
3595				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
3596				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
3597				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
3598				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
3599				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
3600				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
3601				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
3602				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
3603				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
3604				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
3605				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
3606				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
3607				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
3608				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
3609				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
3610				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
3611				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
3612				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
3613				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
3614				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
3615				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
3616				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
3617				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
3618				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
3619				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
3620				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
3621				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
3622				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
3623				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
3624				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
3625				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
3626				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
3627				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
3628				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
3629				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
3630				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
3631				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
3632				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
3633				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
3634				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
3635				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
3636				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
3637				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
3638				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
3639				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
3640				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
3641				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
3642				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
3643				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
3644		};
3645
3646		intc: interrupt-controller@17100000 {
3647			compatible = "arm,gic-v3";
3648			reg = <0 0x17100000 0 0x10000>,		/* GICD */
3649			      <0 0x17180000 0 0x200000>;	/* GICR * 8 */
3650			ranges;
3651			#interrupt-cells = <3>;
3652			interrupt-controller;
3653			#redistributor-regions = <1>;
3654			redistributor-stride = <0 0x40000>;
3655			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
3656			#address-cells = <2>;
3657			#size-cells = <2>;
3658
3659			gic_its: msi-controller@17140000 {
3660				compatible = "arm,gic-v3-its";
3661				reg = <0 0x17140000 0 0x20000>;
3662				msi-controller;
3663				#msi-cells = <1>;
3664			};
3665		};
3666
3667		timer@17420000 {
3668			compatible = "arm,armv7-timer-mem";
3669			reg = <0 0x17420000 0 0x1000>;
3670			ranges = <0 0 0 0x20000000>;
3671			#address-cells = <1>;
3672			#size-cells = <1>;
3673
3674			frame@17421000 {
3675				reg = <0x17421000 0x1000>,
3676				      <0x17422000 0x1000>;
3677				frame-number = <0>;
3678				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
3679					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
3680			};
3681
3682			frame@17423000 {
3683				reg = <0x17423000 0x1000>;
3684				frame-number = <1>;
3685				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
3686				status = "disabled";
3687			};
3688
3689			frame@17425000 {
3690				reg = <0x17425000 0x1000>;
3691				frame-number = <2>;
3692				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
3693				status = "disabled";
3694			};
3695
3696			frame@17427000 {
3697				reg = <0x17427000 0x1000>;
3698				frame-number = <3>;
3699				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
3700				status = "disabled";
3701			};
3702
3703			frame@17429000 {
3704				reg = <0x17429000 0x1000>;
3705				frame-number = <4>;
3706				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
3707				status = "disabled";
3708			};
3709
3710			frame@1742b000 {
3711				reg = <0x1742b000 0x1000>;
3712				frame-number = <5>;
3713				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
3714				status = "disabled";
3715			};
3716
3717			frame@1742d000 {
3718				reg = <0x1742d000 0x1000>;
3719				frame-number = <6>;
3720				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
3721				status = "disabled";
3722			};
3723		};
3724
3725		apps_rsc: rsc@17a00000 {
3726			label = "apps_rsc";
3727			compatible = "qcom,rpmh-rsc";
3728			reg = <0 0x17a00000 0 0x10000>,
3729			      <0 0x17a10000 0 0x10000>,
3730			      <0 0x17a20000 0 0x10000>,
3731			      <0 0x17a30000 0 0x10000>;
3732			reg-names = "drv-0", "drv-1", "drv-2", "drv-3";
3733			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
3734				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
3735				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
3736			qcom,tcs-offset = <0xd00>;
3737			qcom,drv-id = <2>;
3738			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
3739					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
3740			power-domains = <&CLUSTER_PD>;
3741
3742			apps_bcm_voter: bcm-voter {
3743				compatible = "qcom,bcm-voter";
3744			};
3745
3746			rpmhcc: clock-controller {
3747				compatible = "qcom,sm8550-rpmh-clk";
3748				#clock-cells = <1>;
3749				clock-names = "xo";
3750				clocks = <&xo_board>;
3751			};
3752
3753			rpmhpd: power-controller {
3754				compatible = "qcom,sm8550-rpmhpd";
3755				#power-domain-cells = <1>;
3756				operating-points-v2 = <&rpmhpd_opp_table>;
3757
3758				rpmhpd_opp_table: opp-table {
3759					compatible = "operating-points-v2";
3760
3761					rpmhpd_opp_ret: opp-16 {
3762						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
3763					};
3764
3765					rpmhpd_opp_min_svs: opp-48 {
3766						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
3767					};
3768
3769					rpmhpd_opp_low_svs_d2: opp-52 {
3770						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
3771					};
3772
3773					rpmhpd_opp_low_svs_d1: opp-56 {
3774						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
3775					};
3776
3777					rpmhpd_opp_low_svs_d0: opp-60 {
3778						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
3779					};
3780
3781					rpmhpd_opp_low_svs: opp-64 {
3782						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
3783					};
3784
3785					rpmhpd_opp_low_svs_l1: opp-80 {
3786						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
3787					};
3788
3789					rpmhpd_opp_svs: opp-128 {
3790						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
3791					};
3792
3793					rpmhpd_opp_svs_l0: opp-144 {
3794						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
3795					};
3796
3797					rpmhpd_opp_svs_l1: opp-192 {
3798						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
3799					};
3800
3801					rpmhpd_opp_nom: opp-256 {
3802						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
3803					};
3804
3805					rpmhpd_opp_nom_l1: opp-320 {
3806						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
3807					};
3808
3809					rpmhpd_opp_nom_l2: opp-336 {
3810						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
3811					};
3812
3813					rpmhpd_opp_turbo: opp-384 {
3814						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
3815					};
3816
3817					rpmhpd_opp_turbo_l1: opp-416 {
3818						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
3819					};
3820				};
3821			};
3822		};
3823
3824		cpufreq_hw: cpufreq@17d91000 {
3825			compatible = "qcom,sm8550-cpufreq-epss", "qcom,cpufreq-epss";
3826			reg = <0 0x17d91000 0 0x1000>,
3827			      <0 0x17d92000 0 0x1000>,
3828			      <0 0x17d93000 0 0x1000>;
3829			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
3830			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
3831			clock-names = "xo", "alternate";
3832			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
3833				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
3834				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
3835			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
3836			#freq-domain-cells = <1>;
3837			#clock-cells = <1>;
3838		};
3839
3840		pmu@24091000 {
3841			compatible = "qcom,sm8550-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
3842			reg = <0 0x24091000 0 0x1000>;
3843			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
3844			interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>;
3845
3846			operating-points-v2 = <&llcc_bwmon_opp_table>;
3847
3848			llcc_bwmon_opp_table: opp-table {
3849				compatible = "operating-points-v2";
3850
3851				opp-0 {
3852					opp-peak-kBps = <2086000>;
3853				};
3854
3855				opp-1 {
3856					opp-peak-kBps = <2929000>;
3857				};
3858
3859				opp-2 {
3860					opp-peak-kBps = <5931000>;
3861				};
3862
3863				opp-3 {
3864					opp-peak-kBps = <6515000>;
3865				};
3866
3867				opp-4 {
3868					opp-peak-kBps = <7980000>;
3869				};
3870
3871				opp-5 {
3872					opp-peak-kBps = <10437000>;
3873				};
3874
3875				opp-6 {
3876					opp-peak-kBps = <12157000>;
3877				};
3878
3879				opp-7 {
3880					opp-peak-kBps = <14060000>;
3881				};
3882
3883				opp-8 {
3884					opp-peak-kBps = <16113000>;
3885				};
3886			};
3887		};
3888
3889		pmu@240b6400 {
3890			compatible = "qcom,sm8550-cpu-bwmon", "qcom,sdm845-bwmon";
3891			reg = <0 0x240b6400 0 0x600>;
3892			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
3893			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>;
3894
3895			operating-points-v2 = <&cpu_bwmon_opp_table>;
3896
3897			cpu_bwmon_opp_table: opp-table {
3898				compatible = "operating-points-v2";
3899
3900				opp-0 {
3901					opp-peak-kBps = <4577000>;
3902				};
3903
3904				opp-1 {
3905					opp-peak-kBps = <7110000>;
3906				};
3907
3908				opp-2 {
3909					opp-peak-kBps = <9155000>;
3910				};
3911
3912				opp-3 {
3913					opp-peak-kBps = <12298000>;
3914				};
3915
3916				opp-4 {
3917					opp-peak-kBps = <14236000>;
3918				};
3919
3920				opp-5 {
3921					opp-peak-kBps = <16265000>;
3922				};
3923			};
3924		};
3925
3926		gem_noc: interconnect@24100000 {
3927			compatible = "qcom,sm8550-gem-noc";
3928			reg = <0 0x24100000 0 0xbb800>;
3929			#interconnect-cells = <2>;
3930			qcom,bcm-voters = <&apps_bcm_voter>;
3931		};
3932
3933		system-cache-controller@25000000 {
3934			compatible = "qcom,sm8550-llcc";
3935			reg = <0 0x25000000 0 0x200000>,
3936			      <0 0x25200000 0 0x200000>,
3937			      <0 0x25400000 0 0x200000>,
3938			      <0 0x25600000 0 0x200000>,
3939			      <0 0x25800000 0 0x200000>;
3940			reg-names = "llcc0_base",
3941				    "llcc1_base",
3942				    "llcc2_base",
3943				    "llcc3_base",
3944				    "llcc_broadcast_base";
3945			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
3946		};
3947
3948		remoteproc_adsp: remoteproc@30000000 {
3949			compatible = "qcom,sm8550-adsp-pas";
3950			reg = <0x0 0x30000000 0x0 0x100>;
3951
3952			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
3953					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
3954					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
3955					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
3956					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
3957			interrupt-names = "wdog", "fatal", "ready",
3958					  "handover", "stop-ack";
3959
3960			clocks = <&rpmhcc RPMH_CXO_CLK>;
3961			clock-names = "xo";
3962
3963			power-domains = <&rpmhpd RPMHPD_LCX>,
3964					<&rpmhpd RPMHPD_LMX>;
3965			power-domain-names = "lcx", "lmx";
3966
3967			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
3968
3969			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
3970
3971			qcom,qmp = <&aoss_qmp>;
3972
3973			qcom,smem-states = <&smp2p_adsp_out 0>;
3974			qcom,smem-state-names = "stop";
3975
3976			status = "disabled";
3977
3978			remoteproc_adsp_glink: glink-edge {
3979				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
3980							     IPCC_MPROC_SIGNAL_GLINK_QMP
3981							     IRQ_TYPE_EDGE_RISING>;
3982				mboxes = <&ipcc IPCC_CLIENT_LPASS
3983						IPCC_MPROC_SIGNAL_GLINK_QMP>;
3984
3985				label = "lpass";
3986				qcom,remote-pid = <2>;
3987
3988				fastrpc {
3989					compatible = "qcom,fastrpc";
3990					qcom,glink-channels = "fastrpcglink-apps-dsp";
3991					label = "adsp";
3992					#address-cells = <1>;
3993					#size-cells = <0>;
3994
3995					compute-cb@3 {
3996						compatible = "qcom,fastrpc-compute-cb";
3997						reg = <3>;
3998						iommus = <&apps_smmu 0x1003 0x80>,
3999							 <&apps_smmu 0x1063 0x0>;
4000					};
4001
4002					compute-cb@4 {
4003						compatible = "qcom,fastrpc-compute-cb";
4004						reg = <4>;
4005						iommus = <&apps_smmu 0x1004 0x80>,
4006							 <&apps_smmu 0x1064 0x0>;
4007					};
4008
4009					compute-cb@5 {
4010						compatible = "qcom,fastrpc-compute-cb";
4011						reg = <5>;
4012						iommus = <&apps_smmu 0x1005 0x80>,
4013							 <&apps_smmu 0x1065 0x0>;
4014					};
4015
4016					compute-cb@6 {
4017						compatible = "qcom,fastrpc-compute-cb";
4018						reg = <6>;
4019						iommus = <&apps_smmu 0x1006 0x80>,
4020							 <&apps_smmu 0x1066 0x0>;
4021					};
4022
4023					compute-cb@7 {
4024						compatible = "qcom,fastrpc-compute-cb";
4025						reg = <7>;
4026						iommus = <&apps_smmu 0x1007 0x80>,
4027							 <&apps_smmu 0x1067 0x0>;
4028					};
4029				};
4030
4031				gpr {
4032					compatible = "qcom,gpr";
4033					qcom,glink-channels = "adsp_apps";
4034					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
4035					qcom,intents = <512 20>;
4036					#address-cells = <1>;
4037					#size-cells = <0>;
4038
4039					q6apm: service@1 {
4040						compatible = "qcom,q6apm";
4041						reg = <GPR_APM_MODULE_IID>;
4042						#sound-dai-cells = <0>;
4043						qcom,protection-domain = "avs/audio",
4044									 "msm/adsp/audio_pd";
4045
4046						q6apmdai: dais {
4047							compatible = "qcom,q6apm-dais";
4048							iommus = <&apps_smmu 0x1001 0x80>,
4049								 <&apps_smmu 0x1061 0x0>;
4050						};
4051
4052						q6apmbedai: bedais {
4053							compatible = "qcom,q6apm-lpass-dais";
4054							#sound-dai-cells = <1>;
4055						};
4056					};
4057
4058					q6prm: service@2 {
4059						compatible = "qcom,q6prm";
4060						reg = <GPR_PRM_MODULE_IID>;
4061						qcom,protection-domain = "avs/audio",
4062									 "msm/adsp/audio_pd";
4063
4064						q6prmcc: clock-controller {
4065							compatible = "qcom,q6prm-lpass-clocks";
4066							#clock-cells = <2>;
4067						};
4068					};
4069				};
4070			};
4071		};
4072
4073		nsp_noc: interconnect@320c0000 {
4074			compatible = "qcom,sm8550-nsp-noc";
4075			reg = <0 0x320c0000 0 0xe080>;
4076			#interconnect-cells = <2>;
4077			qcom,bcm-voters = <&apps_bcm_voter>;
4078		};
4079
4080		remoteproc_cdsp: remoteproc@32300000 {
4081			compatible = "qcom,sm8550-cdsp-pas";
4082			reg = <0x0 0x32300000 0x0 0x1400000>;
4083
4084			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
4085					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
4086					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
4087					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
4088					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
4089			interrupt-names = "wdog", "fatal", "ready",
4090					  "handover", "stop-ack";
4091
4092			clocks = <&rpmhcc RPMH_CXO_CLK>;
4093			clock-names = "xo";
4094
4095			power-domains = <&rpmhpd RPMHPD_CX>,
4096					<&rpmhpd RPMHPD_MXC>,
4097					<&rpmhpd RPMHPD_NSP>;
4098			power-domain-names = "cx", "mxc", "nsp";
4099
4100			interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
4101
4102			memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>;
4103
4104			qcom,qmp = <&aoss_qmp>;
4105
4106			qcom,smem-states = <&smp2p_cdsp_out 0>;
4107			qcom,smem-state-names = "stop";
4108
4109			status = "disabled";
4110
4111			glink-edge {
4112				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
4113							     IPCC_MPROC_SIGNAL_GLINK_QMP
4114							     IRQ_TYPE_EDGE_RISING>;
4115				mboxes = <&ipcc IPCC_CLIENT_CDSP
4116						IPCC_MPROC_SIGNAL_GLINK_QMP>;
4117
4118				label = "cdsp";
4119				qcom,remote-pid = <5>;
4120
4121				fastrpc {
4122					compatible = "qcom,fastrpc";
4123					qcom,glink-channels = "fastrpcglink-apps-dsp";
4124					label = "cdsp";
4125					#address-cells = <1>;
4126					#size-cells = <0>;
4127
4128					compute-cb@1 {
4129						compatible = "qcom,fastrpc-compute-cb";
4130						reg = <1>;
4131						iommus = <&apps_smmu 0x1961 0x0>,
4132							 <&apps_smmu 0x0c01 0x20>,
4133							 <&apps_smmu 0x19c1 0x10>;
4134					};
4135
4136					compute-cb@2 {
4137						compatible = "qcom,fastrpc-compute-cb";
4138						reg = <2>;
4139						iommus = <&apps_smmu 0x1962 0x0>,
4140							 <&apps_smmu 0x0c02 0x20>,
4141							 <&apps_smmu 0x19c2 0x10>;
4142					};
4143
4144					compute-cb@3 {
4145						compatible = "qcom,fastrpc-compute-cb";
4146						reg = <3>;
4147						iommus = <&apps_smmu 0x1963 0x0>,
4148							 <&apps_smmu 0x0c03 0x20>,
4149							 <&apps_smmu 0x19c3 0x10>;
4150					};
4151
4152					compute-cb@4 {
4153						compatible = "qcom,fastrpc-compute-cb";
4154						reg = <4>;
4155						iommus = <&apps_smmu 0x1964 0x0>,
4156							 <&apps_smmu 0x0c04 0x20>,
4157							 <&apps_smmu 0x19c4 0x10>;
4158					};
4159
4160					compute-cb@5 {
4161						compatible = "qcom,fastrpc-compute-cb";
4162						reg = <5>;
4163						iommus = <&apps_smmu 0x1965 0x0>,
4164							 <&apps_smmu 0x0c05 0x20>,
4165							 <&apps_smmu 0x19c5 0x10>;
4166					};
4167
4168					compute-cb@6 {
4169						compatible = "qcom,fastrpc-compute-cb";
4170						reg = <6>;
4171						iommus = <&apps_smmu 0x1966 0x0>,
4172							 <&apps_smmu 0x0c06 0x20>,
4173							 <&apps_smmu 0x19c6 0x10>;
4174					};
4175
4176					compute-cb@7 {
4177						compatible = "qcom,fastrpc-compute-cb";
4178						reg = <7>;
4179						iommus = <&apps_smmu 0x1967 0x0>,
4180							 <&apps_smmu 0x0c07 0x20>,
4181							 <&apps_smmu 0x19c7 0x10>;
4182					};
4183
4184					compute-cb@8 {
4185						compatible = "qcom,fastrpc-compute-cb";
4186						reg = <8>;
4187						iommus = <&apps_smmu 0x1968 0x0>,
4188							 <&apps_smmu 0x0c08 0x20>,
4189							 <&apps_smmu 0x19c8 0x10>;
4190					};
4191
4192					/* note: secure cb9 in downstream */
4193				};
4194			};
4195		};
4196	};
4197
4198	thermal-zones {
4199		aoss0-thermal {
4200			polling-delay-passive = <0>;
4201			polling-delay = <0>;
4202			thermal-sensors = <&tsens0 0>;
4203
4204			trips {
4205				thermal-engine-config {
4206					temperature = <125000>;
4207					hysteresis = <1000>;
4208					type = "passive";
4209				};
4210
4211				reset-mon-config {
4212					temperature = <115000>;
4213					hysteresis = <5000>;
4214					type = "passive";
4215				};
4216			};
4217		};
4218
4219		cpuss0-thermal {
4220			polling-delay-passive = <0>;
4221			polling-delay = <0>;
4222			thermal-sensors = <&tsens0 1>;
4223
4224			trips {
4225				thermal-engine-config {
4226					temperature = <125000>;
4227					hysteresis = <1000>;
4228					type = "passive";
4229				};
4230
4231				reset-mon-config {
4232					temperature = <115000>;
4233					hysteresis = <5000>;
4234					type = "passive";
4235				};
4236			};
4237		};
4238
4239		cpuss1-thermal {
4240			polling-delay-passive = <0>;
4241			polling-delay = <0>;
4242			thermal-sensors = <&tsens0 2>;
4243
4244			trips {
4245				thermal-engine-config {
4246					temperature = <125000>;
4247					hysteresis = <1000>;
4248					type = "passive";
4249				};
4250
4251				reset-mon-config {
4252					temperature = <115000>;
4253					hysteresis = <5000>;
4254					type = "passive";
4255				};
4256			};
4257		};
4258
4259		cpuss2-thermal {
4260			polling-delay-passive = <0>;
4261			polling-delay = <0>;
4262			thermal-sensors = <&tsens0 3>;
4263
4264			trips {
4265				thermal-engine-config {
4266					temperature = <125000>;
4267					hysteresis = <1000>;
4268					type = "passive";
4269				};
4270
4271				reset-mon-config {
4272					temperature = <115000>;
4273					hysteresis = <5000>;
4274					type = "passive";
4275				};
4276			};
4277		};
4278
4279		cpuss3-thermal {
4280			polling-delay-passive = <0>;
4281			polling-delay = <0>;
4282			thermal-sensors = <&tsens0 4>;
4283
4284			trips {
4285				thermal-engine-config {
4286					temperature = <125000>;
4287					hysteresis = <1000>;
4288					type = "passive";
4289				};
4290
4291				reset-mon-config {
4292					temperature = <115000>;
4293					hysteresis = <5000>;
4294					type = "passive";
4295				};
4296			};
4297		};
4298
4299		cpu3-top-thermal {
4300			polling-delay-passive = <0>;
4301			polling-delay = <0>;
4302			thermal-sensors = <&tsens0 5>;
4303
4304			trips {
4305				cpu3_top_alert0: trip-point0 {
4306					temperature = <90000>;
4307					hysteresis = <2000>;
4308					type = "passive";
4309				};
4310
4311				cpu3_top_alert1: trip-point1 {
4312					temperature = <95000>;
4313					hysteresis = <2000>;
4314					type = "passive";
4315				};
4316
4317				cpu3_top_crit: cpu-critical {
4318					temperature = <110000>;
4319					hysteresis = <1000>;
4320					type = "critical";
4321				};
4322			};
4323		};
4324
4325		cpu3-bottom-thermal {
4326			polling-delay-passive = <0>;
4327			polling-delay = <0>;
4328			thermal-sensors = <&tsens0 6>;
4329
4330			trips {
4331				cpu3_bottom_alert0: trip-point0 {
4332					temperature = <90000>;
4333					hysteresis = <2000>;
4334					type = "passive";
4335				};
4336
4337				cpu3_bottom_alert1: trip-point1 {
4338					temperature = <95000>;
4339					hysteresis = <2000>;
4340					type = "passive";
4341				};
4342
4343				cpu3_bottom_crit: cpu-critical {
4344					temperature = <110000>;
4345					hysteresis = <1000>;
4346					type = "critical";
4347				};
4348			};
4349		};
4350
4351		cpu4-top-thermal {
4352			polling-delay-passive = <0>;
4353			polling-delay = <0>;
4354			thermal-sensors = <&tsens0 7>;
4355
4356			trips {
4357				cpu4_top_alert0: trip-point0 {
4358					temperature = <90000>;
4359					hysteresis = <2000>;
4360					type = "passive";
4361				};
4362
4363				cpu4_top_alert1: trip-point1 {
4364					temperature = <95000>;
4365					hysteresis = <2000>;
4366					type = "passive";
4367				};
4368
4369				cpu4_top_crit: cpu-critical {
4370					temperature = <110000>;
4371					hysteresis = <1000>;
4372					type = "critical";
4373				};
4374			};
4375		};
4376
4377		cpu4-bottom-thermal {
4378			polling-delay-passive = <0>;
4379			polling-delay = <0>;
4380			thermal-sensors = <&tsens0 8>;
4381
4382			trips {
4383				cpu4_bottom_alert0: trip-point0 {
4384					temperature = <90000>;
4385					hysteresis = <2000>;
4386					type = "passive";
4387				};
4388
4389				cpu4_bottom_alert1: trip-point1 {
4390					temperature = <95000>;
4391					hysteresis = <2000>;
4392					type = "passive";
4393				};
4394
4395				cpu4_bottom_crit: cpu-critical {
4396					temperature = <110000>;
4397					hysteresis = <1000>;
4398					type = "critical";
4399				};
4400			};
4401		};
4402
4403		cpu5-top-thermal {
4404			polling-delay-passive = <0>;
4405			polling-delay = <0>;
4406			thermal-sensors = <&tsens0 9>;
4407
4408			trips {
4409				cpu5_top_alert0: trip-point0 {
4410					temperature = <90000>;
4411					hysteresis = <2000>;
4412					type = "passive";
4413				};
4414
4415				cpu5_top_alert1: trip-point1 {
4416					temperature = <95000>;
4417					hysteresis = <2000>;
4418					type = "passive";
4419				};
4420
4421				cpu5_top_crit: cpu-critical {
4422					temperature = <110000>;
4423					hysteresis = <1000>;
4424					type = "critical";
4425				};
4426			};
4427		};
4428
4429		cpu5-bottom-thermal {
4430			polling-delay-passive = <0>;
4431			polling-delay = <0>;
4432			thermal-sensors = <&tsens0 10>;
4433
4434			trips {
4435				cpu5_bottom_alert0: trip-point0 {
4436					temperature = <90000>;
4437					hysteresis = <2000>;
4438					type = "passive";
4439				};
4440
4441				cpu5_bottom_alert1: trip-point1 {
4442					temperature = <95000>;
4443					hysteresis = <2000>;
4444					type = "passive";
4445				};
4446
4447				cpu5_bottom_crit: cpu-critical {
4448					temperature = <110000>;
4449					hysteresis = <1000>;
4450					type = "critical";
4451				};
4452			};
4453		};
4454
4455		cpu6-top-thermal {
4456			polling-delay-passive = <0>;
4457			polling-delay = <0>;
4458			thermal-sensors = <&tsens0 11>;
4459
4460			trips {
4461				cpu6_top_alert0: trip-point0 {
4462					temperature = <90000>;
4463					hysteresis = <2000>;
4464					type = "passive";
4465				};
4466
4467				cpu6_top_alert1: trip-point1 {
4468					temperature = <95000>;
4469					hysteresis = <2000>;
4470					type = "passive";
4471				};
4472
4473				cpu6_top_crit: cpu-critical {
4474					temperature = <110000>;
4475					hysteresis = <1000>;
4476					type = "critical";
4477				};
4478			};
4479		};
4480
4481		cpu6-bottom-thermal {
4482			polling-delay-passive = <0>;
4483			polling-delay = <0>;
4484			thermal-sensors = <&tsens0 12>;
4485
4486			trips {
4487				cpu6_bottom_alert0: trip-point0 {
4488					temperature = <90000>;
4489					hysteresis = <2000>;
4490					type = "passive";
4491				};
4492
4493				cpu6_bottom_alert1: trip-point1 {
4494					temperature = <95000>;
4495					hysteresis = <2000>;
4496					type = "passive";
4497				};
4498
4499				cpu6_bottom_crit: cpu-critical {
4500					temperature = <110000>;
4501					hysteresis = <1000>;
4502					type = "critical";
4503				};
4504			};
4505		};
4506
4507		cpu7-top-thermal {
4508			polling-delay-passive = <0>;
4509			polling-delay = <0>;
4510			thermal-sensors = <&tsens0 13>;
4511
4512			trips {
4513				cpu7_top_alert0: trip-point0 {
4514					temperature = <90000>;
4515					hysteresis = <2000>;
4516					type = "passive";
4517				};
4518
4519				cpu7_top_alert1: trip-point1 {
4520					temperature = <95000>;
4521					hysteresis = <2000>;
4522					type = "passive";
4523				};
4524
4525				cpu7_top_crit: cpu-critical {
4526					temperature = <110000>;
4527					hysteresis = <1000>;
4528					type = "critical";
4529				};
4530			};
4531		};
4532
4533		cpu7-middle-thermal {
4534			polling-delay-passive = <0>;
4535			polling-delay = <0>;
4536			thermal-sensors = <&tsens0 14>;
4537
4538			trips {
4539				cpu7_middle_alert0: trip-point0 {
4540					temperature = <90000>;
4541					hysteresis = <2000>;
4542					type = "passive";
4543				};
4544
4545				cpu7_middle_alert1: trip-point1 {
4546					temperature = <95000>;
4547					hysteresis = <2000>;
4548					type = "passive";
4549				};
4550
4551				cpu7_middle_crit: cpu-critical {
4552					temperature = <110000>;
4553					hysteresis = <1000>;
4554					type = "critical";
4555				};
4556			};
4557		};
4558
4559		cpu7-bottom-thermal {
4560			polling-delay-passive = <0>;
4561			polling-delay = <0>;
4562			thermal-sensors = <&tsens0 15>;
4563
4564			trips {
4565				cpu7_bottom_alert0: trip-point0 {
4566					temperature = <90000>;
4567					hysteresis = <2000>;
4568					type = "passive";
4569				};
4570
4571				cpu7_bottom_alert1: trip-point1 {
4572					temperature = <95000>;
4573					hysteresis = <2000>;
4574					type = "passive";
4575				};
4576
4577				cpu7_bottom_crit: cpu-critical {
4578					temperature = <110000>;
4579					hysteresis = <1000>;
4580					type = "critical";
4581				};
4582			};
4583		};
4584
4585		aoss1-thermal {
4586			polling-delay-passive = <0>;
4587			polling-delay = <0>;
4588			thermal-sensors = <&tsens1 0>;
4589
4590			trips {
4591				thermal-engine-config {
4592					temperature = <125000>;
4593					hysteresis = <1000>;
4594					type = "passive";
4595				};
4596
4597				reset-mon-config {
4598					temperature = <115000>;
4599					hysteresis = <5000>;
4600					type = "passive";
4601				};
4602			};
4603		};
4604
4605		cpu0-thermal {
4606			polling-delay-passive = <0>;
4607			polling-delay = <0>;
4608			thermal-sensors = <&tsens1 1>;
4609
4610			trips {
4611				cpu0_alert0: trip-point0 {
4612					temperature = <90000>;
4613					hysteresis = <2000>;
4614					type = "passive";
4615				};
4616
4617				cpu0_alert1: trip-point1 {
4618					temperature = <95000>;
4619					hysteresis = <2000>;
4620					type = "passive";
4621				};
4622
4623				cpu0_crit: cpu-critical {
4624					temperature = <110000>;
4625					hysteresis = <1000>;
4626					type = "critical";
4627				};
4628			};
4629		};
4630
4631		cpu1-thermal {
4632			polling-delay-passive = <0>;
4633			polling-delay = <0>;
4634			thermal-sensors = <&tsens1 2>;
4635
4636			trips {
4637				cpu1_alert0: trip-point0 {
4638					temperature = <90000>;
4639					hysteresis = <2000>;
4640					type = "passive";
4641				};
4642
4643				cpu1_alert1: trip-point1 {
4644					temperature = <95000>;
4645					hysteresis = <2000>;
4646					type = "passive";
4647				};
4648
4649				cpu1_crit: cpu-critical {
4650					temperature = <110000>;
4651					hysteresis = <1000>;
4652					type = "critical";
4653				};
4654			};
4655		};
4656
4657		cpu2-thermal {
4658			polling-delay-passive = <0>;
4659			polling-delay = <0>;
4660			thermal-sensors = <&tsens1 3>;
4661
4662			trips {
4663				cpu2_alert0: trip-point0 {
4664					temperature = <90000>;
4665					hysteresis = <2000>;
4666					type = "passive";
4667				};
4668
4669				cpu2_alert1: trip-point1 {
4670					temperature = <95000>;
4671					hysteresis = <2000>;
4672					type = "passive";
4673				};
4674
4675				cpu2_crit: cpu-critical {
4676					temperature = <110000>;
4677					hysteresis = <1000>;
4678					type = "critical";
4679				};
4680			};
4681		};
4682
4683		cdsp0-thermal {
4684			polling-delay-passive = <10>;
4685			polling-delay = <0>;
4686			thermal-sensors = <&tsens2 4>;
4687
4688			trips {
4689				thermal-engine-config {
4690					temperature = <125000>;
4691					hysteresis = <1000>;
4692					type = "passive";
4693				};
4694
4695				thermal-hal-config {
4696					temperature = <125000>;
4697					hysteresis = <1000>;
4698					type = "passive";
4699				};
4700
4701				reset-mon-config {
4702					temperature = <115000>;
4703					hysteresis = <5000>;
4704					type = "passive";
4705				};
4706
4707				cdsp0_junction_config: junction-config {
4708					temperature = <95000>;
4709					hysteresis = <5000>;
4710					type = "passive";
4711				};
4712			};
4713		};
4714
4715		cdsp1-thermal {
4716			polling-delay-passive = <10>;
4717			polling-delay = <0>;
4718			thermal-sensors = <&tsens2 5>;
4719
4720			trips {
4721				thermal-engine-config {
4722					temperature = <125000>;
4723					hysteresis = <1000>;
4724					type = "passive";
4725				};
4726
4727				thermal-hal-config {
4728					temperature = <125000>;
4729					hysteresis = <1000>;
4730					type = "passive";
4731				};
4732
4733				reset-mon-config {
4734					temperature = <115000>;
4735					hysteresis = <5000>;
4736					type = "passive";
4737				};
4738
4739				cdsp1_junction_config: junction-config {
4740					temperature = <95000>;
4741					hysteresis = <5000>;
4742					type = "passive";
4743				};
4744			};
4745		};
4746
4747		cdsp2-thermal {
4748			polling-delay-passive = <10>;
4749			polling-delay = <0>;
4750			thermal-sensors = <&tsens2 6>;
4751
4752			trips {
4753				thermal-engine-config {
4754					temperature = <125000>;
4755					hysteresis = <1000>;
4756					type = "passive";
4757				};
4758
4759				thermal-hal-config {
4760					temperature = <125000>;
4761					hysteresis = <1000>;
4762					type = "passive";
4763				};
4764
4765				reset-mon-config {
4766					temperature = <115000>;
4767					hysteresis = <5000>;
4768					type = "passive";
4769				};
4770
4771				cdsp2_junction_config: junction-config {
4772					temperature = <95000>;
4773					hysteresis = <5000>;
4774					type = "passive";
4775				};
4776			};
4777		};
4778
4779		cdsp3-thermal {
4780			polling-delay-passive = <10>;
4781			polling-delay = <0>;
4782			thermal-sensors = <&tsens2 7>;
4783
4784			trips {
4785				thermal-engine-config {
4786					temperature = <125000>;
4787					hysteresis = <1000>;
4788					type = "passive";
4789				};
4790
4791				thermal-hal-config {
4792					temperature = <125000>;
4793					hysteresis = <1000>;
4794					type = "passive";
4795				};
4796
4797				reset-mon-config {
4798					temperature = <115000>;
4799					hysteresis = <5000>;
4800					type = "passive";
4801				};
4802
4803				cdsp3_junction_config: junction-config {
4804					temperature = <95000>;
4805					hysteresis = <5000>;
4806					type = "passive";
4807				};
4808			};
4809		};
4810
4811		video-thermal {
4812			polling-delay-passive = <0>;
4813			polling-delay = <0>;
4814			thermal-sensors = <&tsens1 8>;
4815
4816			trips {
4817				thermal-engine-config {
4818					temperature = <125000>;
4819					hysteresis = <1000>;
4820					type = "passive";
4821				};
4822
4823				reset-mon-config {
4824					temperature = <115000>;
4825					hysteresis = <5000>;
4826					type = "passive";
4827				};
4828			};
4829		};
4830
4831		mem-thermal {
4832			polling-delay-passive = <10>;
4833			polling-delay = <0>;
4834			thermal-sensors = <&tsens1 9>;
4835
4836			trips {
4837				thermal-engine-config {
4838					temperature = <125000>;
4839					hysteresis = <1000>;
4840					type = "passive";
4841				};
4842
4843				ddr_config0: ddr0-config {
4844					temperature = <90000>;
4845					hysteresis = <5000>;
4846					type = "passive";
4847				};
4848
4849				reset-mon-config {
4850					temperature = <115000>;
4851					hysteresis = <5000>;
4852					type = "passive";
4853				};
4854			};
4855		};
4856
4857		modem0-thermal {
4858			polling-delay-passive = <0>;
4859			polling-delay = <0>;
4860			thermal-sensors = <&tsens1 10>;
4861
4862			trips {
4863				thermal-engine-config {
4864					temperature = <125000>;
4865					hysteresis = <1000>;
4866					type = "passive";
4867				};
4868
4869				mdmss0_config0: mdmss0-config0 {
4870					temperature = <102000>;
4871					hysteresis = <3000>;
4872					type = "passive";
4873				};
4874
4875				mdmss0_config1: mdmss0-config1 {
4876					temperature = <105000>;
4877					hysteresis = <3000>;
4878					type = "passive";
4879				};
4880
4881				reset-mon-config {
4882					temperature = <115000>;
4883					hysteresis = <5000>;
4884					type = "passive";
4885				};
4886			};
4887		};
4888
4889		modem1-thermal {
4890			polling-delay-passive = <0>;
4891			polling-delay = <0>;
4892			thermal-sensors = <&tsens1 11>;
4893
4894			trips {
4895				thermal-engine-config {
4896					temperature = <125000>;
4897					hysteresis = <1000>;
4898					type = "passive";
4899				};
4900
4901				mdmss1_config0: mdmss1-config0 {
4902					temperature = <102000>;
4903					hysteresis = <3000>;
4904					type = "passive";
4905				};
4906
4907				mdmss1_config1: mdmss1-config1 {
4908					temperature = <105000>;
4909					hysteresis = <3000>;
4910					type = "passive";
4911				};
4912
4913				reset-mon-config {
4914					temperature = <115000>;
4915					hysteresis = <5000>;
4916					type = "passive";
4917				};
4918			};
4919		};
4920
4921		modem2-thermal {
4922			polling-delay-passive = <0>;
4923			polling-delay = <0>;
4924			thermal-sensors = <&tsens1 12>;
4925
4926			trips {
4927				thermal-engine-config {
4928					temperature = <125000>;
4929					hysteresis = <1000>;
4930					type = "passive";
4931				};
4932
4933				mdmss2_config0: mdmss2-config0 {
4934					temperature = <102000>;
4935					hysteresis = <3000>;
4936					type = "passive";
4937				};
4938
4939				mdmss2_config1: mdmss2-config1 {
4940					temperature = <105000>;
4941					hysteresis = <3000>;
4942					type = "passive";
4943				};
4944
4945				reset-mon-config {
4946					temperature = <115000>;
4947					hysteresis = <5000>;
4948					type = "passive";
4949				};
4950			};
4951		};
4952
4953		modem3-thermal {
4954			polling-delay-passive = <0>;
4955			polling-delay = <0>;
4956			thermal-sensors = <&tsens1 13>;
4957
4958			trips {
4959				thermal-engine-config {
4960					temperature = <125000>;
4961					hysteresis = <1000>;
4962					type = "passive";
4963				};
4964
4965				mdmss3_config0: mdmss3-config0 {
4966					temperature = <102000>;
4967					hysteresis = <3000>;
4968					type = "passive";
4969				};
4970
4971				mdmss3_config1: mdmss3-config1 {
4972					temperature = <105000>;
4973					hysteresis = <3000>;
4974					type = "passive";
4975				};
4976
4977				reset-mon-config {
4978					temperature = <115000>;
4979					hysteresis = <5000>;
4980					type = "passive";
4981				};
4982			};
4983		};
4984
4985		camera0-thermal {
4986			polling-delay-passive = <0>;
4987			polling-delay = <0>;
4988			thermal-sensors = <&tsens1 14>;
4989
4990			trips {
4991				thermal-engine-config {
4992					temperature = <125000>;
4993					hysteresis = <1000>;
4994					type = "passive";
4995				};
4996
4997				reset-mon-config {
4998					temperature = <115000>;
4999					hysteresis = <5000>;
5000					type = "passive";
5001				};
5002			};
5003		};
5004
5005		camera1-thermal {
5006			polling-delay-passive = <0>;
5007			polling-delay = <0>;
5008			thermal-sensors = <&tsens1 15>;
5009
5010			trips {
5011				thermal-engine-config {
5012					temperature = <125000>;
5013					hysteresis = <1000>;
5014					type = "passive";
5015				};
5016
5017				reset-mon-config {
5018					temperature = <115000>;
5019					hysteresis = <5000>;
5020					type = "passive";
5021				};
5022			};
5023		};
5024
5025		aoss2-thermal {
5026			polling-delay-passive = <0>;
5027			polling-delay = <0>;
5028			thermal-sensors = <&tsens2 0>;
5029
5030			trips {
5031				thermal-engine-config {
5032					temperature = <125000>;
5033					hysteresis = <1000>;
5034					type = "passive";
5035				};
5036
5037				reset-mon-config {
5038					temperature = <115000>;
5039					hysteresis = <5000>;
5040					type = "passive";
5041				};
5042			};
5043		};
5044
5045		gpuss-0-thermal {
5046			polling-delay-passive = <10>;
5047			polling-delay = <0>;
5048			thermal-sensors = <&tsens2 1>;
5049
5050			trips {
5051				thermal-engine-config {
5052					temperature = <125000>;
5053					hysteresis = <1000>;
5054					type = "passive";
5055				};
5056
5057				thermal-hal-config {
5058					temperature = <125000>;
5059					hysteresis = <1000>;
5060					type = "passive";
5061				};
5062
5063				reset-mon-config {
5064					temperature = <115000>;
5065					hysteresis = <5000>;
5066					type = "passive";
5067				};
5068
5069				gpu0_junction_config: junction-config {
5070					temperature = <95000>;
5071					hysteresis = <5000>;
5072					type = "passive";
5073				};
5074			};
5075		};
5076
5077		gpuss-1-thermal {
5078			polling-delay-passive = <10>;
5079			polling-delay = <0>;
5080			thermal-sensors = <&tsens2 2>;
5081
5082			trips {
5083				thermal-engine-config {
5084					temperature = <125000>;
5085					hysteresis = <1000>;
5086					type = "passive";
5087				};
5088
5089				thermal-hal-config {
5090					temperature = <125000>;
5091					hysteresis = <1000>;
5092					type = "passive";
5093				};
5094
5095				reset-mon-config {
5096					temperature = <115000>;
5097					hysteresis = <5000>;
5098					type = "passive";
5099				};
5100
5101				gpu1_junction_config: junction-config {
5102					temperature = <95000>;
5103					hysteresis = <5000>;
5104					type = "passive";
5105				};
5106			};
5107		};
5108
5109		gpuss-2-thermal {
5110			polling-delay-passive = <10>;
5111			polling-delay = <0>;
5112			thermal-sensors = <&tsens2 3>;
5113
5114			trips {
5115				thermal-engine-config {
5116					temperature = <125000>;
5117					hysteresis = <1000>;
5118					type = "passive";
5119				};
5120
5121				thermal-hal-config {
5122					temperature = <125000>;
5123					hysteresis = <1000>;
5124					type = "passive";
5125				};
5126
5127				reset-mon-config {
5128					temperature = <115000>;
5129					hysteresis = <5000>;
5130					type = "passive";
5131				};
5132
5133				gpu2_junction_config: junction-config {
5134					temperature = <95000>;
5135					hysteresis = <5000>;
5136					type = "passive";
5137				};
5138			};
5139		};
5140
5141		gpuss-3-thermal {
5142			polling-delay-passive = <10>;
5143			polling-delay = <0>;
5144			thermal-sensors = <&tsens2 4>;
5145
5146			trips {
5147				thermal-engine-config {
5148					temperature = <125000>;
5149					hysteresis = <1000>;
5150					type = "passive";
5151				};
5152
5153				thermal-hal-config {
5154					temperature = <125000>;
5155					hysteresis = <1000>;
5156					type = "passive";
5157				};
5158
5159				reset-mon-config {
5160					temperature = <115000>;
5161					hysteresis = <5000>;
5162					type = "passive";
5163				};
5164
5165				gpu3_junction_config: junction-config {
5166					temperature = <95000>;
5167					hysteresis = <5000>;
5168					type = "passive";
5169				};
5170			};
5171		};
5172
5173		gpuss-4-thermal {
5174			polling-delay-passive = <10>;
5175			polling-delay = <0>;
5176			thermal-sensors = <&tsens2 5>;
5177
5178			trips {
5179				thermal-engine-config {
5180					temperature = <125000>;
5181					hysteresis = <1000>;
5182					type = "passive";
5183				};
5184
5185				thermal-hal-config {
5186					temperature = <125000>;
5187					hysteresis = <1000>;
5188					type = "passive";
5189				};
5190
5191				reset-mon-config {
5192					temperature = <115000>;
5193					hysteresis = <5000>;
5194					type = "passive";
5195				};
5196
5197				gpu4_junction_config: junction-config {
5198					temperature = <95000>;
5199					hysteresis = <5000>;
5200					type = "passive";
5201				};
5202			};
5203		};
5204
5205		gpuss-5-thermal {
5206			polling-delay-passive = <10>;
5207			polling-delay = <0>;
5208			thermal-sensors = <&tsens2 6>;
5209
5210			trips {
5211				thermal-engine-config {
5212					temperature = <125000>;
5213					hysteresis = <1000>;
5214					type = "passive";
5215				};
5216
5217				thermal-hal-config {
5218					temperature = <125000>;
5219					hysteresis = <1000>;
5220					type = "passive";
5221				};
5222
5223				reset-mon-config {
5224					temperature = <115000>;
5225					hysteresis = <5000>;
5226					type = "passive";
5227				};
5228
5229				gpu5_junction_config: junction-config {
5230					temperature = <95000>;
5231					hysteresis = <5000>;
5232					type = "passive";
5233				};
5234			};
5235		};
5236
5237		gpuss-6-thermal {
5238			polling-delay-passive = <10>;
5239			polling-delay = <0>;
5240			thermal-sensors = <&tsens2 7>;
5241
5242			trips {
5243				thermal-engine-config {
5244					temperature = <125000>;
5245					hysteresis = <1000>;
5246					type = "passive";
5247				};
5248
5249				thermal-hal-config {
5250					temperature = <125000>;
5251					hysteresis = <1000>;
5252					type = "passive";
5253				};
5254
5255				reset-mon-config {
5256					temperature = <115000>;
5257					hysteresis = <5000>;
5258					type = "passive";
5259				};
5260
5261				gpu6_junction_config: junction-config {
5262					temperature = <95000>;
5263					hysteresis = <5000>;
5264					type = "passive";
5265				};
5266			};
5267		};
5268
5269		gpuss-7-thermal {
5270			polling-delay-passive = <10>;
5271			polling-delay = <0>;
5272			thermal-sensors = <&tsens2 8>;
5273
5274			trips {
5275				thermal-engine-config {
5276					temperature = <125000>;
5277					hysteresis = <1000>;
5278					type = "passive";
5279				};
5280
5281				thermal-hal-config {
5282					temperature = <125000>;
5283					hysteresis = <1000>;
5284					type = "passive";
5285				};
5286
5287				reset-mon-config {
5288					temperature = <115000>;
5289					hysteresis = <5000>;
5290					type = "passive";
5291				};
5292
5293				gpu7_junction_config: junction-config {
5294					temperature = <95000>;
5295					hysteresis = <5000>;
5296					type = "passive";
5297				};
5298			};
5299		};
5300	};
5301
5302	timer {
5303		compatible = "arm,armv8-timer";
5304		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
5305			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
5306			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
5307			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
5308	};
5309};
5310