1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com>
4 */
5
6/dts-v1/;
7#include <dt-bindings/input/linux-event-codes.h>
8#include <dt-bindings/interrupt-controller/irq.h>
9#include <dt-bindings/pwm/pwm.h>
10#include "rk3399.dtsi"
11#include "rk3399-opp.dtsi"
12
13/ {
14	model = "Leez RK3399 P710";
15	compatible = "leez,p710", "rockchip,rk3399";
16
17	aliases {
18		mmc0 = &sdio0;
19		mmc1 = &sdmmc;
20		mmc2 = &sdhci;
21	};
22
23	chosen {
24		stdout-path = "serial2:1500000n8";
25	};
26
27	clkin_gmac: external-gmac-clock {
28		compatible = "fixed-clock";
29		clock-frequency = <125000000>;
30		clock-output-names = "clkin_gmac";
31		#clock-cells = <0>;
32	};
33
34	sdio_pwrseq: sdio-pwrseq {
35		compatible = "mmc-pwrseq-simple";
36		clocks = <&rk808 1>;
37		clock-names = "ext_clock";
38		pinctrl-names = "default";
39		pinctrl-0 = <&wifi_reg_on_h>;
40		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
41	};
42
43	dc5v_adp: dc5v-adp {
44		compatible = "regulator-fixed";
45		regulator-name = "dc5v_adapter";
46		regulator-always-on;
47		regulator-boot-on;
48		regulator-min-microvolt = <5000000>;
49		regulator-max-microvolt = <5000000>;
50	};
51
52	vcc3v3_lan: vcc3v3-lan {
53		compatible = "regulator-fixed";
54		regulator-name = "vcc3v3_lan";
55		regulator-always-on;
56		regulator-boot-on;
57		regulator-min-microvolt = <3300000>;
58		regulator-max-microvolt = <3300000>;
59		vin-supply = <&vcc3v3_sys>;
60	};
61
62	vcc3v3_sys: vcc3v3-sys {
63		compatible = "regulator-fixed";
64		regulator-name = "vcc3v3_sys";
65		regulator-always-on;
66		regulator-boot-on;
67		regulator-min-microvolt = <3300000>;
68		regulator-max-microvolt = <3300000>;
69		vin-supply = <&vcc5v0_sys>;
70	};
71
72	vcc5v0_host0: vcc5v0_host1: vcc5v0-host {
73		compatible = "regulator-fixed";
74		regulator-name = "vcc5v0_host";
75		regulator-boot-on;
76		regulator-always-on;
77		regulator-min-microvolt = <5500000>;
78		regulator-max-microvolt = <5500000>;
79		vin-supply = <&vcc5v0_sys>;
80	};
81
82	vcc5v0_host3: vcc5v0-host3 {
83		compatible = "regulator-fixed";
84		regulator-name = "vcc5v0_host3";
85		enable-active-high;
86		gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
87		pinctrl-names = "default";
88		pinctrl-0 = <&vcc5v0_host3_en>;
89		regulator-always-on;
90		vin-supply = <&vcc5v0_sys>;
91	};
92
93	vcc5v0_sys: vcc5v0-sys {
94		compatible = "regulator-fixed";
95		regulator-name = "vcc5v0_sys";
96		regulator-always-on;
97		regulator-boot-on;
98		regulator-min-microvolt = <5000000>;
99		regulator-max-microvolt = <5000000>;
100		vin-supply = <&dc5v_adp>;
101	};
102
103	vdd_log: vdd-log {
104		compatible = "pwm-regulator";
105		pwms = <&pwm2 0 25000 1>;
106		pwm-supply = <&vcc5v0_sys>;
107		regulator-name = "vdd_log";
108		regulator-always-on;
109		regulator-boot-on;
110		regulator-min-microvolt = <800000>;
111		regulator-max-microvolt = <1400000>;
112	};
113};
114
115&cpu_l0 {
116	cpu-supply = <&vdd_cpu_l>;
117};
118
119&cpu_l1 {
120	cpu-supply = <&vdd_cpu_l>;
121};
122
123&cpu_l2 {
124	cpu-supply = <&vdd_cpu_l>;
125};
126
127&cpu_l3 {
128	cpu-supply = <&vdd_cpu_l>;
129};
130
131&cpu_b0 {
132	cpu-supply = <&vdd_cpu_b>;
133};
134
135&cpu_b1 {
136	cpu-supply = <&vdd_cpu_b>;
137};
138
139&emmc_phy {
140	status = "okay";
141};
142
143&gmac {
144	assigned-clocks = <&cru SCLK_RMII_SRC>;
145	assigned-clock-parents = <&clkin_gmac>;
146	clock_in_out = "input";
147	phy-supply = <&vcc3v3_lan>;
148	phy-mode = "rgmii";
149	pinctrl-names = "default";
150	pinctrl-0 = <&rgmii_pins>;
151	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
152	snps,reset-active-low;
153	snps,reset-delays-us = <0 10000 50000>;
154	tx_delay = <0x28>;
155	rx_delay = <0x11>;
156	status = "okay";
157};
158
159&gpu {
160	mali-supply = <&vdd_gpu>;
161	status = "okay";
162};
163
164&hdmi {
165	ddc-i2c-bus = <&i2c7>;
166	pinctrl-names = "default";
167	pinctrl-0 = <&hdmi_cec>;
168	status = "okay";
169};
170
171&hdmi_sound {
172	status = "okay";
173};
174
175&i2c0 {
176	clock-frequency = <400000>;
177	i2c-scl-rising-time-ns = <168>;
178	i2c-scl-falling-time-ns = <4>;
179	status = "okay";
180
181	rk808: pmic@1b {
182		compatible = "rockchip,rk808";
183		reg = <0x1b>;
184		interrupt-parent = <&gpio1>;
185		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
186		#clock-cells = <1>;
187		clock-output-names = "xin32k", "rk808-clkout2";
188		pinctrl-names = "default";
189		pinctrl-0 = <&pmic_int_l>;
190		rockchip,system-power-controller;
191		wakeup-source;
192
193		vcc1-supply = <&vcc5v0_sys>;
194		vcc2-supply = <&vcc5v0_sys>;
195		vcc3-supply = <&vcc5v0_sys>;
196		vcc4-supply = <&vcc5v0_sys>;
197		vcc6-supply = <&vcc5v0_sys>;
198		vcc7-supply = <&vcc5v0_sys>;
199		vcc8-supply = <&vcc3v3_sys>;
200		vcc9-supply = <&vcc5v0_sys>;
201		vcc10-supply = <&vcc5v0_sys>;
202		vcc11-supply = <&vcc5v0_sys>;
203		vcc12-supply = <&vcc3v3_sys>;
204		vddio-supply = <&vcc_1v8>;
205
206		regulators {
207			vdd_center: DCDC_REG1 {
208				regulator-name = "vdd_center";
209				regulator-always-on;
210				regulator-boot-on;
211				regulator-min-microvolt = <750000>;
212				regulator-max-microvolt = <1350000>;
213				regulator-ramp-delay = <6001>;
214				regulator-state-mem {
215					regulator-off-in-suspend;
216				};
217			};
218
219			vdd_cpu_l: DCDC_REG2 {
220				regulator-name = "vdd_cpu_l";
221				regulator-always-on;
222				regulator-boot-on;
223				regulator-min-microvolt = <750000>;
224				regulator-max-microvolt = <1350000>;
225				regulator-ramp-delay = <6001>;
226				regulator-state-mem {
227					regulator-off-in-suspend;
228				};
229			};
230
231			vcc_ddr: DCDC_REG3 {
232				regulator-name = "vcc_ddr";
233				regulator-always-on;
234				regulator-boot-on;
235				regulator-state-mem {
236					regulator-on-in-suspend;
237				};
238			};
239
240			vcc_1v8: DCDC_REG4 {
241				regulator-name = "vcc_1v8";
242				regulator-always-on;
243				regulator-boot-on;
244				regulator-min-microvolt = <1800000>;
245				regulator-max-microvolt = <1800000>;
246				regulator-state-mem {
247					regulator-on-in-suspend;
248					regulator-suspend-microvolt = <1800000>;
249				};
250			};
251
252			vcc1v8_dvp: LDO_REG1 {
253				regulator-name = "vcc1v8_dvp";
254				regulator-always-on;
255				regulator-boot-on;
256				regulator-min-microvolt = <1800000>;
257				regulator-max-microvolt = <1800000>;
258				regulator-state-mem {
259					regulator-off-in-suspend;
260				};
261			};
262
263			vcc1v8_hdmi: LDO_REG2 {
264				regulator-name = "vcc1v8_hdmi";
265				regulator-always-on;
266				regulator-boot-on;
267				regulator-min-microvolt = <1800000>;
268				regulator-max-microvolt = <1800000>;
269				regulator-state-mem {
270					regulator-off-in-suspend;
271				};
272			};
273
274			vcca_1v8: LDO_REG3 {
275				regulator-name = "vcca_1v8";
276				regulator-always-on;
277				regulator-boot-on;
278				regulator-min-microvolt = <1800000>;
279				regulator-max-microvolt = <1800000>;
280				regulator-state-mem {
281					regulator-on-in-suspend;
282					regulator-suspend-microvolt = <1800000>;
283				};
284			};
285
286			vccio_sd: LDO_REG4 {
287				regulator-name = "vccio_sd";
288				regulator-always-on;
289				regulator-boot-on;
290				regulator-min-microvolt = <3000000>;
291				regulator-max-microvolt = <3000000>;
292				regulator-state-mem {
293					regulator-on-in-suspend;
294					regulator-suspend-microvolt = <3000000>;
295				};
296			};
297
298			vcca3v0_codec: LDO_REG5 {
299				regulator-name = "vcca3v0_codec";
300				regulator-always-on;
301				regulator-boot-on;
302				regulator-min-microvolt = <3000000>;
303				regulator-max-microvolt = <3000000>;
304				regulator-state-mem {
305					regulator-off-in-suspend;
306				};
307			};
308
309			vcc_1v5: LDO_REG6 {
310				regulator-name = "vcc_1v5";
311				regulator-always-on;
312				regulator-boot-on;
313				regulator-min-microvolt = <1500000>;
314				regulator-max-microvolt = <1500000>;
315				regulator-state-mem {
316					regulator-on-in-suspend;
317					regulator-suspend-microvolt = <1500000>;
318				};
319			};
320
321			vcc0v9_hdmi: LDO_REG7 {
322				regulator-name = "vcc0v9_hdmi";
323				regulator-always-on;
324				regulator-boot-on;
325				regulator-min-microvolt = <900000>;
326				regulator-max-microvolt = <900000>;
327				regulator-state-mem {
328					regulator-off-in-suspend;
329				};
330			};
331
332			vcc_3v0: LDO_REG8 {
333				regulator-name = "vcc_3v0";
334				regulator-always-on;
335				regulator-boot-on;
336				regulator-min-microvolt = <3000000>;
337				regulator-max-microvolt = <3000000>;
338				regulator-state-mem {
339					regulator-on-in-suspend;
340					regulator-suspend-microvolt = <3000000>;
341				};
342			};
343		};
344	};
345
346	vdd_cpu_b: regulator@40 {
347		compatible = "silergy,syr827";
348		reg = <0x40>;
349		fcs,suspend-voltage-selector = <1>;
350		pinctrl-names = "default";
351		pinctrl-0 = <&vsel1_pin>;
352		regulator-name = "vdd_cpu_b";
353		regulator-min-microvolt = <712500>;
354		regulator-max-microvolt = <1500000>;
355		regulator-ramp-delay = <1000>;
356		regulator-always-on;
357		regulator-boot-on;
358		vin-supply = <&vcc5v0_sys>;
359
360		regulator-state-mem {
361			regulator-off-in-suspend;
362		};
363	};
364
365	vdd_gpu: regulator@41 {
366		compatible = "silergy,syr828";
367		reg = <0x41>;
368		fcs,suspend-voltage-selector = <1>;
369		pinctrl-names = "default";
370		pinctrl-0 = <&vsel2_pin>;
371		regulator-name = "vdd_gpu";
372		regulator-min-microvolt = <712500>;
373		regulator-max-microvolt = <1500000>;
374		regulator-ramp-delay = <1000>;
375		regulator-always-on;
376		regulator-boot-on;
377		vin-supply = <&vcc5v0_sys>;
378
379		regulator-state-mem {
380			regulator-off-in-suspend;
381		};
382	};
383};
384
385&i2c1 {
386	i2c-scl-rising-time-ns = <300>;
387	i2c-scl-falling-time-ns = <15>;
388	status = "okay";
389};
390
391&i2c3 {
392	i2c-scl-rising-time-ns = <450>;
393	i2c-scl-falling-time-ns = <15>;
394	status = "okay";
395};
396
397&i2c4 {
398	i2c-scl-rising-time-ns = <600>;
399	i2c-scl-falling-time-ns = <20>;
400	status = "okay";
401};
402
403&i2c7 {
404	status = "okay";
405};
406
407&i2s0 {
408	rockchip,playback-channels = <8>;
409	rockchip,capture-channels = <8>;
410	status = "okay";
411};
412
413&i2s1 {
414	rockchip,playback-channels = <2>;
415	rockchip,capture-channels = <2>;
416	status = "okay";
417};
418
419&i2s2 {
420	status = "okay";
421};
422
423&io_domains {
424	status = "okay";
425
426	bt656-supply = <&vcc1v8_dvp>;
427	audio-supply = <&vcc_1v8>;
428	sdmmc-supply = <&vccio_sd>;
429	gpio1830-supply = <&vcc_3v0>;
430};
431
432&pmu_io_domains {
433	status = "okay";
434	pmu1830-supply = <&vcc_3v0>;
435};
436
437&pinctrl {
438	bt {
439		bt_reg_on_h: bt-reg-on-h {
440			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
441		};
442
443		bt_host_wake_l: bt-host-wake-l {
444			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
445		};
446
447		bt_wake_l: bt-wake-l {
448			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
449		};
450	};
451
452	pmic {
453		pmic_int_l: pmic-int-l {
454			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
455		};
456
457		vsel1_pin: vsel1-pin {
458			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
459		};
460
461		vsel2_pin: vsel2-pin {
462			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
463		};
464	};
465
466	usb2 {
467		vcc5v0_host3_en: vcc5v0-host3-en {
468			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
469		};
470	};
471
472	wifi {
473		wifi_reg_on_h: wifi-reg-on-h {
474			rockchip,pins =
475				<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
476		};
477
478		wifi_host_wake_l: wifi-host-wake-l {
479			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
480		};
481	};
482};
483
484&pwm2 {
485	status = "okay";
486};
487
488&saradc {
489	status = "okay";
490
491	vref-supply = <&vcc_1v8>;
492};
493
494&sdio0 {
495	#address-cells = <1>;
496	#size-cells = <0>;
497	bus-width = <4>;
498	clock-frequency = <50000000>;
499	cap-sdio-irq;
500	cap-sd-highspeed;
501	keep-power-in-suspend;
502	mmc-pwrseq = <&sdio_pwrseq>;
503	non-removable;
504	pinctrl-names = "default";
505	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
506	sd-uhs-sdr104;
507	status = "okay";
508
509	brcmf: wifi@1 {
510		compatible = "brcm,bcm4329-fmac";
511		reg = <1>;
512		interrupt-parent = <&gpio0>;
513		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
514		interrupt-names = "host-wake";
515		pinctrl-names = "default";
516		pinctrl-0 = <&wifi_host_wake_l>;
517	};
518};
519
520&sdhci {
521	bus-width = <8>;
522	mmc-hs400-1_8v;
523	mmc-hs400-enhanced-strobe;
524	non-removable;
525	status = "okay";
526};
527
528&sdmmc {
529	bus-width = <4>;
530	cap-mmc-highspeed;
531	cap-sd-highspeed;
532	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
533	disable-wp;
534	max-frequency = <150000000>;
535	pinctrl-names = "default";
536	pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>;
537	status = "okay";
538};
539
540&tcphy0 {
541	status = "okay";
542};
543
544&tcphy1 {
545	status = "okay";
546};
547
548&tsadc {
549	status = "okay";
550
551	/* tshut mode 0:CRU 1:GPIO */
552	rockchip,hw-tshut-mode = <1>;
553	/* tshut polarity 0:LOW 1:HIGH */
554	rockchip,hw-tshut-polarity = <1>;
555};
556
557&u2phy0 {
558	status = "okay";
559
560	u2phy0_otg: otg-port {
561		status = "okay";
562	};
563
564	u2phy0_host: host-port {
565		phy-supply = <&vcc5v0_host0>;
566		status = "okay";
567	};
568};
569
570&u2phy1 {
571	status = "okay";
572
573	u2phy1_otg: otg-port {
574		status = "okay";
575	};
576
577	u2phy1_host: host-port {
578		phy-supply = <&vcc5v0_host1>;
579		status = "okay";
580	};
581};
582
583&uart0 {
584	pinctrl-names = "default";
585	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
586	status = "okay";
587
588	bluetooth {
589		compatible = "brcm,bcm43438-bt";
590		clocks = <&rk808 1>;
591		clock-names = "ext_clock";
592		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
593		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
594		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
595		pinctrl-names = "default";
596		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
597	};
598};
599
600&uart2 {
601	status = "okay";
602};
603
604&usb_host0_ehci {
605	status = "okay";
606};
607
608&usb_host0_ohci {
609	status = "okay";
610};
611
612&usb_host1_ehci {
613	status = "okay";
614};
615
616&usb_host1_ohci {
617	status = "okay";
618};
619
620&usbdrd3_0 {
621	status = "okay";
622};
623
624&usbdrd_dwc3_0 {
625	status = "okay";
626	dr_mode = "otg";
627};
628
629&usbdrd3_1 {
630	status = "okay";
631};
632
633&usbdrd_dwc3_1 {
634	status = "okay";
635	dr_mode = "host";
636};
637
638&vopb {
639	status = "okay";
640};
641
642&vopb_mmu {
643	status = "okay";
644};
645
646&vopl {
647	status = "okay";
648};
649
650&vopl_mmu {
651	status = "okay";
652};
653