1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * dts file for Xilinx ZynqMP zc1751-xm018-dc4
4 *
5 * (C) Copyright 2015 - 2021, Xilinx, Inc.
6 *
7 * Michal Simek <michal.simek@xilinx.com>
8 */
9
10/dts-v1/;
11
12#include "zynqmp.dtsi"
13#include "zynqmp-clk-ccf.dtsi"
14
15/ {
16	model = "ZynqMP zc1751-xm018-dc4";
17	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
18
19	aliases {
20		ethernet0 = &gem0;
21		ethernet1 = &gem1;
22		ethernet2 = &gem2;
23		ethernet3 = &gem3;
24		i2c0 = &i2c0;
25		i2c1 = &i2c1;
26		rtc0 = &rtc;
27		serial0 = &uart0;
28		serial1 = &uart1;
29		spi0 = &qspi;
30	};
31
32	chosen {
33		bootargs = "earlycon";
34		stdout-path = "serial0:115200n8";
35	};
36
37	memory@0 {
38		device_type = "memory";
39		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
40	};
41};
42
43&can0 {
44	status = "okay";
45};
46
47&can1 {
48	status = "okay";
49};
50
51&fpd_dma_chan1 {
52	status = "okay";
53};
54
55&fpd_dma_chan2 {
56	status = "okay";
57};
58
59&fpd_dma_chan3 {
60	status = "okay";
61};
62
63&fpd_dma_chan4 {
64	status = "okay";
65};
66
67&fpd_dma_chan5 {
68	status = "okay";
69};
70
71&fpd_dma_chan6 {
72	status = "okay";
73};
74
75&fpd_dma_chan7 {
76	status = "okay";
77};
78
79&fpd_dma_chan8 {
80	status = "okay";
81};
82
83&lpd_dma_chan1 {
84	status = "okay";
85};
86
87&lpd_dma_chan2 {
88	status = "okay";
89};
90
91&lpd_dma_chan3 {
92	status = "okay";
93};
94
95&lpd_dma_chan4 {
96	status = "okay";
97};
98
99&lpd_dma_chan5 {
100	status = "okay";
101};
102
103&lpd_dma_chan6 {
104	status = "okay";
105};
106
107&lpd_dma_chan7 {
108	status = "okay";
109};
110
111&lpd_dma_chan8 {
112	status = "okay";
113};
114
115&gem0 {
116	status = "okay";
117	phy-mode = "rgmii-id";
118	phy-handle = <&ethernet_phy0>;
119	ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
120		reg = <0>;
121	};
122	ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
123		reg = <7>;
124	};
125	ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
126		reg = <3>;
127	};
128	ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
129		reg = <8>;
130	};
131};
132
133&gem1 {
134	status = "okay";
135	phy-mode = "rgmii-id";
136	phy-handle = <&ethernet_phy7>;
137};
138
139&gem2 {
140	status = "okay";
141	phy-mode = "rgmii-id";
142	phy-handle = <&ethernet_phy3>;
143};
144
145&gem3 {
146	status = "okay";
147	phy-mode = "rgmii-id";
148	phy-handle = <&ethernet_phy8>;
149};
150
151&gpio {
152	status = "okay";
153};
154
155&i2c0 {
156	clock-frequency = <400000>;
157	status = "okay";
158};
159
160&i2c1 {
161	clock-frequency = <400000>;
162	status = "okay";
163};
164
165&qspi {
166	status = "okay";
167	flash@0 {
168		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
169		#address-cells = <1>;
170		#size-cells = <1>;
171		reg = <0x0>;
172		spi-tx-bus-width = <1>;
173		spi-rx-bus-width = <4>; /* also DUAL configuration possible */
174		spi-max-frequency = <108000000>; /* Based on DC1 spec */
175	};
176};
177
178&rtc {
179	status = "okay";
180};
181
182&uart0 {
183	status = "okay";
184};
185
186&uart1 {
187	status = "okay";
188};
189
190&watchdog0 {
191	status = "okay";
192};
193
194&zynqmp_dpdma {
195	status = "okay";
196};
197
198&zynqmp_dpsub {
199	status = "okay";
200};
201