1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * dts file for Xilinx ZynqMP ZCU111
4 *
5 * (C) Copyright 2017 - 2022, Xilinx, Inc.
6 * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
7 *
8 * Michal Simek <michal.simek@amd.com>
9 */
10
11/dts-v1/;
12
13#include "zynqmp.dtsi"
14#include "zynqmp-clk-ccf.dtsi"
15#include <dt-bindings/input/input.h>
16#include <dt-bindings/gpio/gpio.h>
17#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
18#include <dt-bindings/phy/phy.h>
19
20/ {
21	model = "ZynqMP ZCU111 RevA";
22	compatible = "xlnx,zynqmp-zcu111-revA", "xlnx,zynqmp-zcu111", "xlnx,zynqmp";
23
24	aliases {
25		ethernet0 = &gem3;
26		i2c0 = &i2c0;
27		i2c1 = &i2c1;
28		mmc0 = &sdhci1;
29		nvmem0 = &eeprom;
30		rtc0 = &rtc;
31		serial0 = &uart0;
32		serial1 = &dcc;
33		spi0 = &qspi;
34		usb0 = &usb0;
35	};
36
37	chosen {
38		bootargs = "earlycon";
39		stdout-path = "serial0:115200n8";
40	};
41
42	memory@0 {
43		device_type = "memory";
44		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
45		/* Another 4GB connected to PL */
46	};
47
48	gpio-keys {
49		compatible = "gpio-keys";
50		autorepeat;
51		switch-19 {
52			label = "sw19";
53			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
54			linux,code = <KEY_DOWN>;
55			wakeup-source;
56			autorepeat;
57		};
58	};
59
60	leds {
61		compatible = "gpio-leds";
62		heartbeat-led {
63			label = "heartbeat";
64			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
65			linux,default-trigger = "heartbeat";
66		};
67	};
68
69	ina226-u67 {
70		compatible = "iio-hwmon";
71		io-channels = <&u67 0>, <&u67 1>, <&u67 2>, <&u67 3>;
72	};
73	ina226-u59 {
74		compatible = "iio-hwmon";
75		io-channels = <&u59 0>, <&u59 1>, <&u59 2>, <&u59 3>;
76	};
77	ina226-u61 {
78		compatible = "iio-hwmon";
79		io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>;
80	};
81	ina226-u60 {
82		compatible = "iio-hwmon";
83		io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>;
84	};
85	ina226-u64 {
86		compatible = "iio-hwmon";
87		io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>;
88	};
89	ina226-u69 {
90		compatible = "iio-hwmon";
91		io-channels = <&u69 0>, <&u69 1>, <&u69 2>, <&u69 3>;
92	};
93	ina226-u66 {
94		compatible = "iio-hwmon";
95		io-channels = <&u66 0>, <&u66 1>, <&u66 2>, <&u66 3>;
96	};
97	ina226-u65 {
98		compatible = "iio-hwmon";
99		io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
100	};
101	ina226-u63 {
102		compatible = "iio-hwmon";
103		io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>;
104	};
105	ina226-u3 {
106		compatible = "iio-hwmon";
107		io-channels = <&u3 0>, <&u3 1>, <&u3 2>, <&u3 3>;
108	};
109	ina226-u71 {
110		compatible = "iio-hwmon";
111		io-channels = <&u71 0>, <&u71 1>, <&u71 2>, <&u71 3>;
112	};
113	ina226-u77 {
114		compatible = "iio-hwmon";
115		io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
116	};
117	ina226-u73 {
118		compatible = "iio-hwmon";
119		io-channels = <&u73 0>, <&u73 1>, <&u73 2>, <&u73 3>;
120	};
121	ina226-u79 {
122		compatible = "iio-hwmon";
123		io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
124	};
125
126	/* 48MHz reference crystal */
127	ref48: ref48M {
128		compatible = "fixed-clock";
129		#clock-cells = <0>;
130		clock-frequency = <48000000>;
131	};
132};
133
134&dcc {
135	status = "okay";
136};
137
138&fpd_dma_chan1 {
139	status = "okay";
140};
141
142&fpd_dma_chan2 {
143	status = "okay";
144};
145
146&fpd_dma_chan3 {
147	status = "okay";
148};
149
150&fpd_dma_chan4 {
151	status = "okay";
152};
153
154&fpd_dma_chan5 {
155	status = "okay";
156};
157
158&fpd_dma_chan6 {
159	status = "okay";
160};
161
162&fpd_dma_chan7 {
163	status = "okay";
164};
165
166&fpd_dma_chan8 {
167	status = "okay";
168};
169
170&gem3 {
171	status = "okay";
172	phy-handle = <&phy0>;
173	phy-mode = "rgmii-id";
174	pinctrl-names = "default";
175	pinctrl-0 = <&pinctrl_gem3_default>;
176	mdio: mdio {
177		#address-cells = <1>;
178		#size-cells = <0>;
179		phy0: ethernet-phy@c {
180			#phy-cells = <1>;
181			compatible = "ethernet-phy-id2000.a231";
182			reg = <0xc>;
183			ti,rx-internal-delay = <0x8>;
184			ti,tx-internal-delay = <0xa>;
185			ti,fifo-depth = <0x1>;
186			ti,dp83867-rxctrl-strap-quirk;
187			reset-gpios = <&tca6416_u22 6 GPIO_ACTIVE_LOW>;
188		};
189	};
190};
191
192&gpio {
193	status = "okay";
194	pinctrl-names = "default";
195	pinctrl-0 = <&pinctrl_gpio_default>;
196};
197
198&gpu {
199	status = "okay";
200};
201
202&i2c0 {
203	status = "okay";
204	clock-frequency = <400000>;
205	pinctrl-names = "default", "gpio";
206	pinctrl-0 = <&pinctrl_i2c0_default>;
207	pinctrl-1 = <&pinctrl_i2c0_gpio>;
208	scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
209	sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
210
211	tca6416_u22: gpio@20 {
212		compatible = "ti,tca6416";
213		reg = <0x20>;
214		gpio-controller; /* interrupt not connected */
215		#gpio-cells = <2>;
216		/*
217		 * IRQ not connected
218		 * Lines:
219		 * 0 - MAX6643_OT_B
220		 * 1 - MAX6643_FANFAIL_B
221		 * 2 - MIO26_PMU_INPUT_LS
222		 * 4 - SFP_SI5382_INT_ALM
223		 * 5 - IIC_MUX_RESET_B
224		 * 6 - GEM3_EXP_RESET_B
225		 * 10 - FMCP_HSPC_PRSNT_M2C_B
226		 * 11 - CLK_SPI_MUX_SEL0
227		 * 12 - CLK_SPI_MUX_SEL1
228		 * 16 - IRPS5401_ALERT_B
229		 * 17 - INA226_PMBUS_ALERT
230		 * 3, 7, 13-15 - not connected
231		 */
232	};
233
234	i2c-mux@75 { /* u23 */
235		compatible = "nxp,pca9544";
236		#address-cells = <1>;
237		#size-cells = <0>;
238		reg = <0x75>;
239		i2c@0 {
240			#address-cells = <1>;
241			#size-cells = <0>;
242			reg = <0>;
243			/* PS_PMBUS */
244			/* PMBUS_ALERT done via pca9544 */
245			u67: ina226@40 { /* u67 */
246				compatible = "ti,ina226";
247				#io-channel-cells = <1>;
248				label = "ina226-u67";
249				reg = <0x40>;
250				shunt-resistor = <2000>;
251			};
252			u59: ina226@41 { /* u59 */
253				compatible = "ti,ina226";
254				#io-channel-cells = <1>;
255				label = "ina226-u59";
256				reg = <0x41>;
257				shunt-resistor = <5000>;
258			};
259			u61: ina226@42 { /* u61 */
260				compatible = "ti,ina226";
261				#io-channel-cells = <1>;
262				label = "ina226-u61";
263				reg = <0x42>;
264				shunt-resistor = <5000>;
265			};
266			u60: ina226@43 { /* u60 */
267				compatible = "ti,ina226";
268				#io-channel-cells = <1>;
269				label = "ina226-u60";
270				reg = <0x43>;
271				shunt-resistor = <5000>;
272			};
273			u64: ina226@45 { /* u64 */
274				compatible = "ti,ina226";
275				#io-channel-cells = <1>;
276				label = "ina226-u64";
277				reg = <0x45>;
278				shunt-resistor = <5000>;
279			};
280			u69: ina226@46 { /* u69 */
281				compatible = "ti,ina226";
282				#io-channel-cells = <1>;
283				label = "ina226-u69";
284				reg = <0x46>;
285				shunt-resistor = <2000>;
286			};
287			u66: ina226@47 { /* u66 */
288				compatible = "ti,ina226";
289				#io-channel-cells = <1>;
290				label = "ina226-u66";
291				reg = <0x47>;
292				shunt-resistor = <5000>;
293			};
294			u65: ina226@48 { /* u65 */
295				compatible = "ti,ina226";
296				#io-channel-cells = <1>;
297				label = "ina226-u65";
298				reg = <0x48>;
299				shunt-resistor = <5000>;
300			};
301			u63: ina226@49 { /* u63 */
302				compatible = "ti,ina226";
303				#io-channel-cells = <1>;
304				label = "ina226-u63";
305				reg = <0x49>;
306				shunt-resistor = <5000>;
307			};
308			u3: ina226@4a { /* u3 */
309				compatible = "ti,ina226";
310				#io-channel-cells = <1>;
311				label = "ina226-u3";
312				reg = <0x4a>;
313				shunt-resistor = <5000>;
314			};
315			u71: ina226@4b { /* u71 */
316				compatible = "ti,ina226";
317				#io-channel-cells = <1>;
318				label = "ina226-u71";
319				reg = <0x4b>;
320				shunt-resistor = <5000>;
321			};
322			u77: ina226@4c { /* u77 */
323				compatible = "ti,ina226";
324				#io-channel-cells = <1>;
325				label = "ina226-u77";
326				reg = <0x4c>;
327				shunt-resistor = <5000>;
328			};
329			u73: ina226@4d { /* u73 */
330				compatible = "ti,ina226";
331				#io-channel-cells = <1>;
332				label = "ina226-u73";
333				reg = <0x4d>;
334				shunt-resistor = <5000>;
335			};
336			u79: ina226@4e { /* u79 */
337				compatible = "ti,ina226";
338				#io-channel-cells = <1>;
339				label = "ina226-u79";
340				reg = <0x4e>;
341				shunt-resistor = <5000>;
342			};
343		};
344		i2c@1 {
345			#address-cells = <1>;
346			#size-cells = <0>;
347			reg = <1>;
348			/* NC */
349		};
350		i2c@2 {
351			#address-cells = <1>;
352			#size-cells = <0>;
353			reg = <2>;
354			irps5401_43: irps5401@43 { /* IRPS5401 - u53 check these */
355				compatible = "infineon,irps5401";
356				reg = <0x43>;
357			};
358			irps5401_44: irps5401@44 { /* IRPS5401 - u55 */
359				compatible = "infineon,irps5401";
360				reg = <0x44>;
361			};
362			irps5401_45: irps5401@45 { /* IRPS5401 - u57 */
363				compatible = "infineon,irps5401";
364				reg = <0x45>;
365			};
366			/* u68 IR38064 +0 */
367			/* u70 IR38060 +1 */
368			/* u74 IR38060 +2 */
369			/* u75 IR38060 +6 */
370			/* J19 header too */
371
372		};
373		i2c@3 {
374			#address-cells = <1>;
375			#size-cells = <0>;
376			reg = <3>;
377			/* SYSMON */
378		};
379	};
380};
381
382&i2c1 {
383	status = "okay";
384	clock-frequency = <400000>;
385	pinctrl-names = "default", "gpio";
386	pinctrl-0 = <&pinctrl_i2c1_default>;
387	pinctrl-1 = <&pinctrl_i2c1_gpio>;
388	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
389	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
390
391	i2c-mux@74 { /* u26 */
392		compatible = "nxp,pca9548";
393		#address-cells = <1>;
394		#size-cells = <0>;
395		reg = <0x74>;
396		i2c@0 {
397			#address-cells = <1>;
398			#size-cells = <0>;
399			reg = <0>;
400			/*
401			 * IIC_EEPROM 1kB memory which uses 256B blocks
402			 * where every block has different address.
403			 *    0 - 256B address 0x54
404			 * 256B - 512B address 0x55
405			 * 512B - 768B address 0x56
406			 * 768B - 1024B address 0x57
407			 */
408			eeprom: eeprom@54 { /* u88 */
409				compatible = "atmel,24c08";
410				reg = <0x54>;
411			};
412		};
413		i2c@1 {
414			#address-cells = <1>;
415			#size-cells = <0>;
416			reg = <1>;
417			si5341: clock-generator@36 { /* SI5341 - u46 */
418				compatible = "silabs,si5341";
419				reg = <0x36>;
420				#clock-cells = <2>;
421				#address-cells = <1>;
422				#size-cells = <0>;
423				clocks = <&ref48>;
424				clock-names = "xtal";
425				clock-output-names = "si5341";
426
427				si5341_0: out@0 {
428					/* refclk0 for PS-GT, used for DP */
429					reg = <0>;
430					always-on;
431				};
432				si5341_2: out@2 {
433					/* refclk2 for PS-GT, used for USB3 */
434					reg = <2>;
435					always-on;
436				};
437				si5341_3: out@3 {
438					/* refclk3 for PS-GT, used for SATA */
439					reg = <3>;
440					always-on;
441				};
442				si5341_5: out@5 {
443					/* refclk5 PL CLK100 */
444					reg = <5>;
445					always-on;
446				};
447				si5341_6: out@6 {
448					/* refclk6 PL CLK125 */
449					reg = <6>;
450					always-on;
451				};
452				si5341_9: out@9 {
453					/* refclk9 used for PS_REF_CLK 33.3 MHz */
454					reg = <9>;
455					always-on;
456				};
457			};
458		};
459		i2c@2 {
460			#address-cells = <1>;
461			#size-cells = <0>;
462			reg = <2>;
463			si570_1: clock-generator@5d { /* USER SI570 - u47 */
464				#clock-cells = <0>;
465				compatible = "silabs,si570";
466				reg = <0x5d>;
467				temperature-stability = <50>;
468				factory-fout = <300000000>;
469				clock-frequency = <300000000>;
470				clock-output-names = "si570_user";
471			};
472		};
473		i2c@3 {
474			#address-cells = <1>;
475			#size-cells = <0>;
476			reg = <3>;
477			si570_2: clock-generator@5d { /* USER MGT SI570 - u49 */
478				#clock-cells = <0>;
479				compatible = "silabs,si570";
480				reg = <0x5d>;
481				temperature-stability = <50>;
482				factory-fout = <156250000>;
483				clock-frequency = <156250000>;
484				clock-output-names = "si570_mgt";
485			};
486		};
487		i2c@4 {
488			#address-cells = <1>;
489			#size-cells = <0>;
490			reg = <4>;
491			/* SI5382 - u48 */
492		};
493		i2c@5 {
494			#address-cells = <1>;
495			#size-cells = <0>;
496			reg = <5>;
497				sc18is603@2f { /* sc18is602 - u93 */
498					compatible = "nxp,sc18is603";
499					reg = <0x2f>;
500					/* 4 gpios for CS not handled by driver */
501					/*
502					 * USB2ANY cable or
503					 * LMK04208 - u90 or
504					 * LMX2594 - u102 or
505					 * LMX2594 - u103 or
506					 * LMX2594 - u104
507					 */
508				};
509		};
510		i2c@6 {
511			#address-cells = <1>;
512			#size-cells = <0>;
513			reg = <6>;
514			/* FMC connector */
515		};
516		/* 7 NC */
517	};
518
519	i2c-mux@75 {
520		compatible = "nxp,pca9548"; /* u27 */
521		#address-cells = <1>;
522		#size-cells = <0>;
523		reg = <0x75>;
524
525		i2c@0 {
526			#address-cells = <1>;
527			#size-cells = <0>;
528			reg = <0>;
529			/* FMCP_HSPC_IIC */
530		};
531		i2c@1 {
532			#address-cells = <1>;
533			#size-cells = <0>;
534			reg = <1>;
535			/* NC */
536		};
537		i2c@2 {
538			#address-cells = <1>;
539			#size-cells = <0>;
540			reg = <2>;
541			/* SYSMON */
542		};
543		i2c@3 {
544			#address-cells = <1>;
545			#size-cells = <0>;
546			reg = <3>;
547			/* DDR4 SODIMM */
548		};
549		i2c@4 {
550			#address-cells = <1>;
551			#size-cells = <0>;
552			reg = <4>;
553			/* SFP3 */
554		};
555		i2c@5 {
556			#address-cells = <1>;
557			#size-cells = <0>;
558			reg = <5>;
559			/* SFP2 */
560		};
561		i2c@6 {
562			#address-cells = <1>;
563			#size-cells = <0>;
564			reg = <6>;
565			/* SFP1 */
566		};
567		i2c@7 {
568			#address-cells = <1>;
569			#size-cells = <0>;
570			reg = <7>;
571			/* SFP0 */
572		};
573	};
574};
575
576&pinctrl0 {
577	status = "okay";
578	pinctrl_i2c0_default: i2c0-default {
579		mux {
580			groups = "i2c0_3_grp";
581			function = "i2c0";
582		};
583
584		conf {
585			groups = "i2c0_3_grp";
586			bias-pull-up;
587			slew-rate = <SLEW_RATE_SLOW>;
588			power-source = <IO_STANDARD_LVCMOS18>;
589		};
590	};
591
592	pinctrl_i2c0_gpio: i2c0-gpio {
593		mux {
594			groups = "gpio0_14_grp", "gpio0_15_grp";
595			function = "gpio0";
596		};
597
598		conf {
599			groups = "gpio0_14_grp", "gpio0_15_grp";
600			slew-rate = <SLEW_RATE_SLOW>;
601			power-source = <IO_STANDARD_LVCMOS18>;
602		};
603	};
604
605	pinctrl_i2c1_default: i2c1-default {
606		mux {
607			groups = "i2c1_4_grp";
608			function = "i2c1";
609		};
610
611		conf {
612			groups = "i2c1_4_grp";
613			bias-pull-up;
614			slew-rate = <SLEW_RATE_SLOW>;
615			power-source = <IO_STANDARD_LVCMOS18>;
616		};
617	};
618
619	pinctrl_i2c1_gpio: i2c1-gpio {
620		mux {
621			groups = "gpio0_16_grp", "gpio0_17_grp";
622			function = "gpio0";
623		};
624
625		conf {
626			groups = "gpio0_16_grp", "gpio0_17_grp";
627			slew-rate = <SLEW_RATE_SLOW>;
628			power-source = <IO_STANDARD_LVCMOS18>;
629		};
630	};
631
632	pinctrl_uart0_default: uart0-default {
633		mux {
634			groups = "uart0_4_grp";
635			function = "uart0";
636		};
637
638		conf {
639			groups = "uart0_4_grp";
640			slew-rate = <SLEW_RATE_SLOW>;
641			power-source = <IO_STANDARD_LVCMOS18>;
642		};
643
644		conf-rx {
645			pins = "MIO18";
646			bias-high-impedance;
647		};
648
649		conf-tx {
650			pins = "MIO19";
651			bias-disable;
652		};
653	};
654
655	pinctrl_usb0_default: usb0-default {
656		mux {
657			groups = "usb0_0_grp";
658			function = "usb0";
659		};
660
661		conf {
662			groups = "usb0_0_grp";
663			power-source = <IO_STANDARD_LVCMOS18>;
664		};
665
666		conf-rx {
667			pins = "MIO52", "MIO53", "MIO55";
668			bias-high-impedance;
669			drive-strength = <12>;
670			slew-rate = <SLEW_RATE_FAST>;
671		};
672
673		conf-tx {
674			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
675			       "MIO60", "MIO61", "MIO62", "MIO63";
676			bias-disable;
677			drive-strength = <4>;
678			slew-rate = <SLEW_RATE_SLOW>;
679		};
680	};
681
682	pinctrl_gem3_default: gem3-default {
683		mux {
684			function = "ethernet3";
685			groups = "ethernet3_0_grp";
686		};
687
688		conf {
689			groups = "ethernet3_0_grp";
690			slew-rate = <SLEW_RATE_SLOW>;
691			power-source = <IO_STANDARD_LVCMOS18>;
692		};
693
694		conf-rx {
695			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
696									"MIO75";
697			bias-high-impedance;
698			low-power-disable;
699		};
700
701		conf-tx {
702			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
703									"MIO69";
704			bias-disable;
705			low-power-enable;
706		};
707
708		mux-mdio {
709			function = "mdio3";
710			groups = "mdio3_0_grp";
711		};
712
713		conf-mdio {
714			groups = "mdio3_0_grp";
715			slew-rate = <SLEW_RATE_SLOW>;
716			power-source = <IO_STANDARD_LVCMOS18>;
717			bias-disable;
718		};
719	};
720
721	pinctrl_sdhci1_default: sdhci1-default {
722		mux {
723			groups = "sdio1_0_grp";
724			function = "sdio1";
725		};
726
727		conf {
728			groups = "sdio1_0_grp";
729			slew-rate = <SLEW_RATE_SLOW>;
730			power-source = <IO_STANDARD_LVCMOS18>;
731			bias-disable;
732		};
733
734		mux-cd {
735			groups = "sdio1_cd_0_grp";
736			function = "sdio1_cd";
737		};
738
739		conf-cd {
740			groups = "sdio1_cd_0_grp";
741			bias-high-impedance;
742			bias-pull-up;
743			slew-rate = <SLEW_RATE_SLOW>;
744			power-source = <IO_STANDARD_LVCMOS18>;
745		};
746	};
747
748	pinctrl_gpio_default: gpio-default {
749		mux {
750			function = "gpio0";
751			groups = "gpio0_22_grp", "gpio0_23_grp";
752		};
753
754		conf {
755			groups = "gpio0_22_grp", "gpio0_23_grp";
756			slew-rate = <SLEW_RATE_SLOW>;
757			power-source = <IO_STANDARD_LVCMOS18>;
758		};
759
760		mux-msp {
761			function = "gpio0";
762			groups = "gpio0_13_grp", "gpio0_38_grp";
763		};
764
765		conf-msp {
766			groups = "gpio0_13_grp", "gpio0_38_grp";
767			slew-rate = <SLEW_RATE_SLOW>;
768			power-source = <IO_STANDARD_LVCMOS18>;
769		};
770
771		conf-pull-up {
772			pins = "MIO22";
773			bias-pull-up;
774		};
775
776		conf-pull-none {
777			pins = "MIO13", "MIO23", "MIO38";
778			bias-disable;
779		};
780	};
781};
782
783&psgtr {
784	status = "okay";
785	/* nc, dp, usb3, sata */
786	clocks = <&si5341 0 0>, <&si5341 0 2>, <&si5341 0 3>;
787	clock-names = "ref1", "ref2", "ref3";
788};
789
790&qspi {
791	status = "okay";
792	flash@0 {
793		compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */
794		#address-cells = <1>;
795		#size-cells = <1>;
796		reg = <0x0>;
797		spi-tx-bus-width = <4>;
798		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
799		spi-max-frequency = <108000000>; /* Based on DC1 spec */
800	};
801};
802
803&rtc {
804	status = "okay";
805};
806
807&sata {
808	status = "okay";
809	/* SATA OOB timing settings */
810	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
811	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
812	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
813	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
814	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
815	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
816	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
817	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
818	phy-names = "sata-phy";
819	phys = <&psgtr 3 PHY_TYPE_SATA 1 3>;
820};
821
822/* SD1 with level shifter */
823&sdhci1 {
824	status = "okay";
825	pinctrl-names = "default";
826	pinctrl-0 = <&pinctrl_sdhci1_default>;
827	disable-wp;
828	/*
829	 * This property should be removed for supporting UHS mode
830	 */
831	no-1-8-v;
832	xlnx,mio-bank = <1>;
833};
834
835&uart0 {
836	status = "okay";
837	pinctrl-names = "default";
838	pinctrl-0 = <&pinctrl_uart0_default>;
839};
840
841/* ULPI SMSC USB3320 */
842&usb0 {
843	status = "okay";
844	pinctrl-names = "default";
845	pinctrl-0 = <&pinctrl_usb0_default>;
846	phy-names = "usb3-phy";
847	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
848};
849
850&dwc3_0 {
851	status = "okay";
852	dr_mode = "host";
853	snps,usb3_lpm_capable;
854	maximum-speed = "super-speed";
855};
856
857&zynqmp_dpdma {
858	status = "okay";
859};
860
861&zynqmp_dpsub {
862	status = "okay";
863	phy-names = "dp-phy0", "dp-phy1";
864	phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
865	       <&psgtr 0 PHY_TYPE_DP 1 1>;
866};
867