1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Device Tree for the MGCOGE plattform from keymile
4 *
5 * Copyright 2008 DENX Software Engineering GmbH
6 * Heiko Schocher <hs@denx.de>
7 */
8
9/dts-v1/;
10/ {
11	model = "MGCOGE";
12	compatible = "keymile,km82xx";
13	#address-cells = <1>;
14	#size-cells = <1>;
15
16	aliases {
17		ethernet0 = &eth0;
18		serial0 = &smc2;
19	};
20
21	cpus {
22		#address-cells = <1>;
23		#size-cells = <0>;
24
25		PowerPC,8247@0 {
26			device_type = "cpu";
27			reg = <0>;
28			d-cache-line-size = <32>;
29			i-cache-line-size = <32>;
30			d-cache-size = <16384>;
31			i-cache-size = <16384>;
32			timebase-frequency = <0>; /* Filled in by U-Boot */
33			clock-frequency = <0>; /* Filled in by U-Boot */
34			bus-frequency = <0>; /* Filled in by U-Boot */
35		};
36	};
37
38	localbus@f0010100 {
39		compatible = "fsl,mpc8247-localbus",
40		             "fsl,pq2-localbus",
41		             "simple-bus";
42		#address-cells = <2>;
43		#size-cells = <1>;
44		reg = <0xf0010100 0x40>;
45
46		ranges = <0 0 0xfe000000 0x00400000
47			  1 0 0x30000000 0x00010000
48			  2 0 0x40000000 0x00010000
49			  5 0 0x50000000 0x04000000
50			>;
51
52		flash@0,0 {
53			compatible = "cfi-flash";
54			reg = <0 0x0 0x400000>;
55			#address-cells = <1>;
56			#size-cells = <1>;
57			bank-width = <1>;
58			device-width = <1>;
59			partition@0 {
60				label = "u-boot";
61				reg = <0x00000 0xC0000>;
62			};
63			partition@1 {
64				label = "env";
65				reg = <0xC0000 0x20000>;
66			};
67			partition@2 {
68				label = "envred";
69				reg = <0xE0000 0x20000>;
70			};
71			partition@3 {
72				label = "free";
73				reg = <0x100000 0x300000>;
74			};
75		};
76
77		flash@5,0 {
78			compatible = "cfi-flash";
79			reg = <5 0x00000000 0x02000000
80			       5 0x02000000 0x02000000>;
81			#address-cells = <1>;
82			#size-cells = <1>;
83			bank-width = <2>;
84			partition@app { /* 64 MBytes */
85				label = "ubi0";
86				reg = <0x00000000 0x04000000>;
87			};
88		};
89	};
90
91	memory {
92		device_type = "memory";
93		reg = <0 0>; /* Filled in by U-Boot */
94	};
95
96	soc@f0000000 {
97		#address-cells = <1>;
98		#size-cells = <1>;
99		compatible = "fsl,mpc8247-immr", "fsl,pq2-soc", "simple-bus";
100		ranges = <0x00000000 0xf0000000 0x00053000>;
101
102		// Temporary until code stops depending on it.
103		device_type = "soc";
104
105		cpm@119c0 {
106			#address-cells = <1>;
107			#size-cells = <1>;
108			#interrupt-cells = <2>;
109			compatible = "fsl,mpc8247-cpm", "fsl,cpm2",
110					"simple-bus";
111			reg = <0x119c0 0x30>;
112			ranges;
113
114			muram {
115				compatible = "fsl,cpm-muram";
116				#address-cells = <1>;
117				#size-cells = <1>;
118				ranges = <0 0 0x10000>;
119
120				data@0 {
121					compatible = "fsl,cpm-muram-data";
122					reg = <0x80 0x1f80 0x9800 0x800>;
123				};
124			};
125
126			brg@119f0 {
127				compatible = "fsl,mpc8247-brg",
128				             "fsl,cpm2-brg",
129				             "fsl,cpm-brg";
130				reg = <0x119f0 0x10 0x115f0 0x10>;
131			};
132
133			/* Monitor port/SMC2 */
134			smc2: serial@11a90 {
135				device_type = "serial";
136				compatible = "fsl,mpc8247-smc-uart",
137				             "fsl,cpm2-smc-uart";
138				reg = <0x11a90 0x20 0x88fc 0x02>;
139				interrupts = <5 8>;
140				interrupt-parent = <&PIC>;
141				fsl,cpm-brg = <2>;
142				fsl,cpm-command = <0x21200000>;
143				current-speed = <0>; /* Filled in by U-Boot */
144			};
145
146			eth0: ethernet@11a60 {
147				device_type = "network";
148				compatible = "fsl,mpc8247-scc-enet",
149				             "fsl,cpm2-scc-enet";
150				reg = <0x11a60 0x20 0x8300 0x100 0x11390 1>;
151				local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
152				interrupts = <43 8>;
153				interrupt-parent = <&PIC>;
154				linux,network-index = <0>;
155				fsl,cpm-command = <0xce00000>;
156				fixed-link = <0 0 10 0 0>;
157			};
158
159			i2c@11860 {
160				compatible = "fsl,mpc8272-i2c",
161					     "fsl,cpm2-i2c";
162				reg = <0x11860 0x20 0x8afc 0x2>;
163				interrupts = <1 8>;
164				interrupt-parent = <&PIC>;
165				fsl,cpm-command = <0x29600000>;
166				#address-cells = <1>;
167				#size-cells = <0>;
168			};
169
170			mdio@10d40 {
171				compatible = "fsl,cpm2-mdio-bitbang";
172				reg = <0x10d00 0x14>;
173				#address-cells = <1>;
174				#size-cells = <0>;
175				fsl,mdio-pin = <12>;
176				fsl,mdc-pin = <13>;
177
178				phy0: ethernet-phy@0 {
179					reg = <0x0>;
180				};
181
182				phy1: ethernet-phy@1 {
183					reg = <0x1>;
184				};
185			};
186
187			/* FCC1 management to switch */
188			ethernet@11300 {
189				device_type = "network";
190				compatible = "fsl,cpm2-fcc-enet";
191				reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
192				local-mac-address = [ 00 01 02 03 04 07 ];
193				interrupts = <32 8>;
194				interrupt-parent = <&PIC>;
195				phy-handle = <&phy0>;
196				linux,network-index = <1>;
197				fsl,cpm-command = <0x12000300>;
198			};
199
200			/* FCC2 to redundant core unit over backplane */
201			ethernet@11320 {
202				device_type = "network";
203				compatible = "fsl,cpm2-fcc-enet";
204				reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
205				local-mac-address = [ 00 01 02 03 04 08 ];
206				interrupts = <33 8>;
207				interrupt-parent = <&PIC>;
208				phy-handle = <&phy1>;
209				linux,network-index = <2>;
210				fsl,cpm-command = <0x16200300>;
211			};
212
213			usb@11b60 {
214				compatible = "fsl,mpc8272-cpm-usb";
215				mode = "peripheral";
216				reg = <0x11b60 0x40 0x8b00 0x100>;
217				interrupts = <11 8>;
218				interrupt-parent = <&PIC>;
219				usb-clock = <5>;
220			};
221			spi@11aa0 {
222				cell-index = <0>;
223				compatible = "fsl,spi", "fsl,cpm2-spi";
224				reg = <0x11a80 0x40 0x89fc 0x2>;
225				interrupts = <2 8>;
226				interrupt-parent = <&PIC>;
227				cs-gpios = < &cpm2_pio_d 19 0>;
228			};
229
230		};
231
232		cpm2_pio_d: gpio-controller@10d60 {
233			#gpio-cells = <2>;
234			compatible = "fsl,cpm2-pario-bank";
235			reg = <0x10d60 0x14>;
236			gpio-controller;
237		};
238
239		cpm2_pio_c: gpio-controller@10d40 {
240			#gpio-cells = <2>;
241			compatible = "fsl,cpm2-pario-bank";
242			reg = <0x10d40 0x14>;
243			gpio-controller;
244		};
245
246		PIC: interrupt-controller@10c00 {
247			#interrupt-cells = <2>;
248			interrupt-controller;
249			reg = <0x10c00 0x80>;
250			compatible = "fsl,mpc8247-pic", "fsl,pq2-pic";
251		};
252	};
253};
254