man/man8/zpool-iostat.8

.\"
.\" CDDL HEADER START
.\"
.\" The contents of this file are subject to the terms of the
.\" Common Development and Distribution License (the "License").
.\" You may not use this file except in compliance with the License.
.\"
.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
.\" or http://www.opensolaris.org/os/licensing.
.\" See the License for the specific language governing permissions
.\" and limitations under the License.
.\"
.\" When distributing Covered Code, include this CDDL HEADER in each
.\" file and include the License file at usr/src/OPENSOLARIS.LICENSE.
.\" If applicable, add the following below this CDDL HEADER, with the
.\" fields enclosed by brackets "[]" replaced with your own identifying
.\" information: Portions Copyright [yyyy] [name of copyright owner]
.\"
.\" CDDL HEADER END
.\"
.\" Copyright (c) 2007, Sun Microsystems, Inc. All Rights Reserved.
.\" Copyright (c) 2012, 2018 by Delphix. All rights reserved.
.\" Copyright (c) 2012 Cyril Plisko. All Rights Reserved.
.\" Copyright (c) 2017 Datto Inc.
.\" Copyright (c) 2018 George Melikov. All Rights Reserved.
.\" Copyright 2017 Nexenta Systems, Inc.
.\" Copyright (c) 2017 Open-E, Inc. All Rights Reserved.
.\"
.Dd May 27, 2021
.Dt ZPOOL-IOSTAT 8
.Os
.
.Sh NAME
.Nm zpool-iostat
.Nd display logical I/O statistics for ZFS storage pools
.Sh SYNOPSIS
.Nm zpool
.Cm iostat
.Op Oo Oo Fl c Ar SCRIPT Oc Oo Fl lq Oc Oc Ns | Ns Fl rw
.Op Fl T Sy u Ns | Ns Sy d
.Op Fl ghHLnpPvy
.Oo Ar pool Ns … Ns | Ns Oo Ar pool vdev Ns … Oc Ns | Ns Ar vdev Ns … Oc
.Op Ar interval Op Ar count
.
.Sh DESCRIPTION
Displays logical I/O statistics for the given pools/vdevs.
Physical I/O statistics may be observed via
.Xr iostat 1 .
If writes are located nearby, they may be merged into a single
larger operation.
Additional I/O may be generated depending on the level of vdev redundancy.
To filter output, you may pass in a list of pools, a pool and list of vdevs
in that pool, or a list of any vdevs from any pool.
If no items are specified, statistics for every pool in the system are shown.
When given an
.Ar interval ,
the statistics are printed every
.Ar interval
seconds until killed.
If
.Fl n
flag is specified the headers are displayed only once, otherwise they are
displayed periodically.
If
.Ar count
is specified, the command exits after
.Ar count
reports are printed.
The first report printed is always the statistics since boot regardless of whether
.Ar interval
and
.Ar count
are passed.
However, this behavior can be suppressed with the
.Fl y
flag.
Also note that the units of
.Sy K ,
.Sy M ,
.Sy G Ns …
that are printed in the report are in base 1024.
To get the raw values, use the
.Fl p
flag.
.Bl -tag -width Ds
.It Fl c Op Ar SCRIPT1 Ns Oo , Ns Ar SCRIPT2 Oc Ns …
Run a script (or scripts) on each vdev and include the output as a new column
in the
.Nm zpool Cm iostat
output.
Users can run any script found in their
.Pa ~/.zpool.d
directory or from the system
.Pa /etc/zfs/zpool.d
directory.
Script names containing the slash
.Pq Sy /
character are not allowed.
The default search path can be overridden by setting the
.Sy ZPOOL_SCRIPTS_PATH
environment variable.
A privileged user can only run
.Fl c
if they have the
.Sy ZPOOL_SCRIPTS_AS_ROOT
environment variable set.
If a script requires the use of a privileged command, like
.Xr smartctl 8 ,
then it's recommended you allow the user access to it in
.Pa /etc/sudoers
or add the user to the
.Pa /etc/sudoers.d/zfs
file.
.Pp
If
.Fl c
is passed without a script name, it prints a list of all scripts.
.Fl c
also sets verbose mode
.No \&( Ns Fl v Ns No \&).
.Pp
Script output should be in the form of "name=value".
The column name is set to "name" and the value is set to "value".
Multiple lines can be used to output multiple columns.
The first line of output not in the
"name=value" format is displayed without a column title,
and no more output after that is displayed.
This can be useful for printing error messages.
Blank or NULL values are printed as a '-' to make output AWKable.
.Pp
The following environment variables are set before running each script:
.Bl -tag -compact -width "VDEV_ENC_SYSFS_PATH"
.It Sy VDEV_PATH
Full path to the vdev
.It Sy VDEV_UPATH
Underlying path to the vdev
.Pq Pa /dev/sd* .
For use with device mapper, multipath, or partitioned vdevs.
.It Sy VDEV_ENC_SYSFS_PATH
The sysfs path to the enclosure for the vdev (if any).
.El
.It Fl T Sy u Ns | Ns Sy d
Display a time stamp.
Specify
.Sy u
for a printed representation of the internal representation of time.
See
.Xr time 2 .
Specify
.Sy d
for standard date format.
See
.Xr date 1 .
.It Fl g
Display vdev GUIDs instead of the normal device names.
These GUIDs can be used in place of device names for the zpool
detach/offline/remove/replace commands.
.It Fl H
Scripted mode.
Do not display headers, and separate fields by a
single tab instead of arbitrary space.
.It Fl L
Display real paths for vdevs resolving all symbolic links.
This can be used to look up the current block device name regardless of the
.Pa /dev/disk/
path used to open it.
.It Fl n
Print headers only once when passed
.It Fl p
Display numbers in parsable (exact) values.
Time values are in nanoseconds.
.It Fl P
Display full paths for vdevs instead of only the last component of the path.
This can be used in conjunction with the
.Fl L
flag.
.It Fl r
Print request size histograms for the leaf vdev's I/O.
This includes histograms of individual I/O (ind) and aggregate I/O (agg).
These stats can be useful for observing how well I/O aggregation is working.
Note that TRIM I/O may exceed 16M, but will be counted as 16M.
.It Fl v
Verbose statistics Reports usage statistics for individual vdevs within the
pool, in addition to the pool-wide statistics.
.It Fl y
Normally the first line of output reports the statistics since boot:
suppress it.
.It Fl w
Display latency histograms:
.Bl -tag -compact -width "asyncq_read/write"
.It Sy total_wait
Total I/O time (queuing + disk I/O time).
.It Sy disk_wait
Disk I/O time (time reading/writing the disk).
.It Sy syncq_wait
Amount of time I/O spent in synchronous priority queues.
Does not include disk time.
.It Sy asyncq_wait
Amount of time I/O spent in asynchronous priority queues.
Does not include disk time.
.It Sy scrub
Amount of time I/O spent in scrub queue.
Does not include disk time.
.It Sy rebuild
Amount of time I/O spent in rebuild queue.
Does not include disk time.
.El
.It Fl l
Include average latency statistics:
.Bl -tag -compact -width "asyncq_read/write"
.It Sy total_wait
Average total I/O time (queuing + disk I/O time).
.It Sy disk_wait
Average disk I/O time (time reading/writing the disk).
.It Sy syncq_wait
Average amount of time I/O spent in synchronous priority queues.
Does not include disk time.
.It Sy asyncq_wait
Average amount of time I/O spent in asynchronous priority queues.
Does not include disk time.
.It Sy scrub
Average queuing time in scrub queue.
Does not include disk time.
.It Sy trim
Average queuing time in trim queue.
Does not include disk time.
.It Sy rebuild
Average queuing time in rebuild queue.
Does not include disk time.
.El
.It Fl q
Include active queue statistics.
Each priority queue has both pending
.Sy ( pend )
and active
.Sy ( activ )
I/O requests.
Pending requests are waiting to be issued to the disk,
and active requests have been issued to disk and are waiting for completion.
These stats are broken out by priority queue:
.Bl -tag -compact -width "asyncq_read/write"
.It Sy syncq_read/write
Current number of entries in synchronous priority
queues.
.It Sy asyncq_read/write
Current number of entries in asynchronous priority queues.
.It Sy scrubq_read
Current number of entries in scrub queue.
.It Sy trimq_write
Current number of entries in trim queue.
.It Sy rebuildq_write
Current number of entries in rebuild queue.
.El
.Pp
All queue statistics are instantaneous measurements of the number of
entries in the queues.
If you specify an interval,
the measurements will be sampled from the end of the interval.
.El
.
.Sh SEE ALSO
.Xr iostat 1 ,
.Xr smartctl 8 ,
.Xr zpool-list 8 ,
.Xr zpool-status 8