1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
23  * Copyright (c) 2011, 2019 by Delphix. All rights reserved.
24  * Copyright 2015 Nexenta Systems, Inc.  All rights reserved.
25  * Copyright (c) 2014 Spectra Logic Corporation, All rights reserved.
26  * Copyright 2013 Saso Kiselkov. All rights reserved.
27  * Copyright (c) 2017 Datto Inc.
28  * Copyright (c) 2017, Intel Corporation.
29  * Copyright (c) 2019, loli10K <ezomori.nozomu@gmail.com>. All rights reserved.
30  */
31 
32 #include <sys/zfs_context.h>
33 #include <sys/spa_impl.h>
34 #include <sys/zio.h>
35 #include <sys/zio_checksum.h>
36 #include <sys/zio_compress.h>
37 #include <sys/dmu.h>
38 #include <sys/dmu_tx.h>
39 #include <sys/zap.h>
40 #include <sys/zil.h>
41 #include <sys/vdev_impl.h>
42 #include <sys/vdev_initialize.h>
43 #include <sys/vdev_trim.h>
44 #include <sys/vdev_file.h>
45 #include <sys/vdev_raidz.h>
46 #include <sys/metaslab.h>
47 #include <sys/uberblock_impl.h>
48 #include <sys/txg.h>
49 #include <sys/avl.h>
50 #include <sys/unique.h>
51 #include <sys/dsl_pool.h>
52 #include <sys/dsl_dir.h>
53 #include <sys/dsl_prop.h>
54 #include <sys/fm/util.h>
55 #include <sys/dsl_scan.h>
56 #include <sys/fs/zfs.h>
57 #include <sys/metaslab_impl.h>
58 #include <sys/arc.h>
59 #include <sys/ddt.h>
60 #include <sys/kstat.h>
61 #include "zfs_prop.h"
62 #include <sys/btree.h>
63 #include <sys/zfeature.h>
64 #include <sys/qat.h>
65 #include <sys/zstd/zstd.h>
66 
67 /*
68  * SPA locking
69  *
70  * There are three basic locks for managing spa_t structures:
71  *
72  * spa_namespace_lock (global mutex)
73  *
74  *	This lock must be acquired to do any of the following:
75  *
76  *		- Lookup a spa_t by name
77  *		- Add or remove a spa_t from the namespace
78  *		- Increase spa_refcount from non-zero
79  *		- Check if spa_refcount is zero
80  *		- Rename a spa_t
81  *		- add/remove/attach/detach devices
82  *		- Held for the duration of create/destroy/import/export
83  *
84  *	It does not need to handle recursion.  A create or destroy may
85  *	reference objects (files or zvols) in other pools, but by
86  *	definition they must have an existing reference, and will never need
87  *	to lookup a spa_t by name.
88  *
89  * spa_refcount (per-spa zfs_refcount_t protected by mutex)
90  *
91  *	This reference count keep track of any active users of the spa_t.  The
92  *	spa_t cannot be destroyed or freed while this is non-zero.  Internally,
93  *	the refcount is never really 'zero' - opening a pool implicitly keeps
94  *	some references in the DMU.  Internally we check against spa_minref, but
95  *	present the image of a zero/non-zero value to consumers.
96  *
97  * spa_config_lock[] (per-spa array of rwlocks)
98  *
99  *	This protects the spa_t from config changes, and must be held in
100  *	the following circumstances:
101  *
102  *		- RW_READER to perform I/O to the spa
103  *		- RW_WRITER to change the vdev config
104  *
105  * The locking order is fairly straightforward:
106  *
107  *		spa_namespace_lock	->	spa_refcount
108  *
109  *	The namespace lock must be acquired to increase the refcount from 0
110  *	or to check if it is zero.
111  *
112  *		spa_refcount		->	spa_config_lock[]
113  *
114  *	There must be at least one valid reference on the spa_t to acquire
115  *	the config lock.
116  *
117  *		spa_namespace_lock	->	spa_config_lock[]
118  *
119  *	The namespace lock must always be taken before the config lock.
120  *
121  *
122  * The spa_namespace_lock can be acquired directly and is globally visible.
123  *
124  * The namespace is manipulated using the following functions, all of which
125  * require the spa_namespace_lock to be held.
126  *
127  *	spa_lookup()		Lookup a spa_t by name.
128  *
129  *	spa_add()		Create a new spa_t in the namespace.
130  *
131  *	spa_remove()		Remove a spa_t from the namespace.  This also
132  *				frees up any memory associated with the spa_t.
133  *
134  *	spa_next()		Returns the next spa_t in the system, or the
135  *				first if NULL is passed.
136  *
137  *	spa_evict_all()		Shutdown and remove all spa_t structures in
138  *				the system.
139  *
140  *	spa_guid_exists()	Determine whether a pool/device guid exists.
141  *
142  * The spa_refcount is manipulated using the following functions:
143  *
144  *	spa_open_ref()		Adds a reference to the given spa_t.  Must be
145  *				called with spa_namespace_lock held if the
146  *				refcount is currently zero.
147  *
148  *	spa_close()		Remove a reference from the spa_t.  This will
149  *				not free the spa_t or remove it from the
150  *				namespace.  No locking is required.
151  *
152  *	spa_refcount_zero()	Returns true if the refcount is currently
153  *				zero.  Must be called with spa_namespace_lock
154  *				held.
155  *
156  * The spa_config_lock[] is an array of rwlocks, ordered as follows:
157  * SCL_CONFIG > SCL_STATE > SCL_ALLOC > SCL_ZIO > SCL_FREE > SCL_VDEV.
158  * spa_config_lock[] is manipulated with spa_config_{enter,exit,held}().
159  *
160  * To read the configuration, it suffices to hold one of these locks as reader.
161  * To modify the configuration, you must hold all locks as writer.  To modify
162  * vdev state without altering the vdev tree's topology (e.g. online/offline),
163  * you must hold SCL_STATE and SCL_ZIO as writer.
164  *
165  * We use these distinct config locks to avoid recursive lock entry.
166  * For example, spa_sync() (which holds SCL_CONFIG as reader) induces
167  * block allocations (SCL_ALLOC), which may require reading space maps
168  * from disk (dmu_read() -> zio_read() -> SCL_ZIO).
169  *
170  * The spa config locks cannot be normal rwlocks because we need the
171  * ability to hand off ownership.  For example, SCL_ZIO is acquired
172  * by the issuing thread and later released by an interrupt thread.
173  * They do, however, obey the usual write-wanted semantics to prevent
174  * writer (i.e. system administrator) starvation.
175  *
176  * The lock acquisition rules are as follows:
177  *
178  * SCL_CONFIG
179  *	Protects changes to the vdev tree topology, such as vdev
180  *	add/remove/attach/detach.  Protects the dirty config list
181  *	(spa_config_dirty_list) and the set of spares and l2arc devices.
182  *
183  * SCL_STATE
184  *	Protects changes to pool state and vdev state, such as vdev
185  *	online/offline/fault/degrade/clear.  Protects the dirty state list
186  *	(spa_state_dirty_list) and global pool state (spa_state).
187  *
188  * SCL_ALLOC
189  *	Protects changes to metaslab groups and classes.
190  *	Held as reader by metaslab_alloc() and metaslab_claim().
191  *
192  * SCL_ZIO
193  *	Held by bp-level zios (those which have no io_vd upon entry)
194  *	to prevent changes to the vdev tree.  The bp-level zio implicitly
195  *	protects all of its vdev child zios, which do not hold SCL_ZIO.
196  *
197  * SCL_FREE
198  *	Protects changes to metaslab groups and classes.
199  *	Held as reader by metaslab_free().  SCL_FREE is distinct from
200  *	SCL_ALLOC, and lower than SCL_ZIO, so that we can safely free
201  *	blocks in zio_done() while another i/o that holds either
202  *	SCL_ALLOC or SCL_ZIO is waiting for this i/o to complete.
203  *
204  * SCL_VDEV
205  *	Held as reader to prevent changes to the vdev tree during trivial
206  *	inquiries such as bp_get_dsize().  SCL_VDEV is distinct from the
207  *	other locks, and lower than all of them, to ensure that it's safe
208  *	to acquire regardless of caller context.
209  *
210  * In addition, the following rules apply:
211  *
212  * (a)	spa_props_lock protects pool properties, spa_config and spa_config_list.
213  *	The lock ordering is SCL_CONFIG > spa_props_lock.
214  *
215  * (b)	I/O operations on leaf vdevs.  For any zio operation that takes
216  *	an explicit vdev_t argument -- such as zio_ioctl(), zio_read_phys(),
217  *	or zio_write_phys() -- the caller must ensure that the config cannot
218  *	cannot change in the interim, and that the vdev cannot be reopened.
219  *	SCL_STATE as reader suffices for both.
220  *
221  * The vdev configuration is protected by spa_vdev_enter() / spa_vdev_exit().
222  *
223  *	spa_vdev_enter()	Acquire the namespace lock and the config lock
224  *				for writing.
225  *
226  *	spa_vdev_exit()		Release the config lock, wait for all I/O
227  *				to complete, sync the updated configs to the
228  *				cache, and release the namespace lock.
229  *
230  * vdev state is protected by spa_vdev_state_enter() / spa_vdev_state_exit().
231  * Like spa_vdev_enter/exit, these are convenience wrappers -- the actual
232  * locking is, always, based on spa_namespace_lock and spa_config_lock[].
233  */
234 
235 static avl_tree_t spa_namespace_avl;
236 kmutex_t spa_namespace_lock;
237 static kcondvar_t spa_namespace_cv;
238 int spa_max_replication_override = SPA_DVAS_PER_BP;
239 
240 static kmutex_t spa_spare_lock;
241 static avl_tree_t spa_spare_avl;
242 static kmutex_t spa_l2cache_lock;
243 static avl_tree_t spa_l2cache_avl;
244 
245 kmem_cache_t *spa_buffer_pool;
246 spa_mode_t spa_mode_global = SPA_MODE_UNINIT;
247 
248 #ifdef ZFS_DEBUG
249 /*
250  * Everything except dprintf, set_error, spa, and indirect_remap is on
251  * by default in debug builds.
252  */
253 int zfs_flags = ~(ZFS_DEBUG_DPRINTF | ZFS_DEBUG_SET_ERROR |
254     ZFS_DEBUG_INDIRECT_REMAP);
255 #else
256 int zfs_flags = 0;
257 #endif
258 
259 /*
260  * zfs_recover can be set to nonzero to attempt to recover from
261  * otherwise-fatal errors, typically caused by on-disk corruption.  When
262  * set, calls to zfs_panic_recover() will turn into warning messages.
263  * This should only be used as a last resort, as it typically results
264  * in leaked space, or worse.
265  */
266 int zfs_recover = B_FALSE;
267 
268 /*
269  * If destroy encounters an EIO while reading metadata (e.g. indirect
270  * blocks), space referenced by the missing metadata can not be freed.
271  * Normally this causes the background destroy to become "stalled", as
272  * it is unable to make forward progress.  While in this stalled state,
273  * all remaining space to free from the error-encountering filesystem is
274  * "temporarily leaked".  Set this flag to cause it to ignore the EIO,
275  * permanently leak the space from indirect blocks that can not be read,
276  * and continue to free everything else that it can.
277  *
278  * The default, "stalling" behavior is useful if the storage partially
279  * fails (i.e. some but not all i/os fail), and then later recovers.  In
280  * this case, we will be able to continue pool operations while it is
281  * partially failed, and when it recovers, we can continue to free the
282  * space, with no leaks.  However, note that this case is actually
283  * fairly rare.
284  *
285  * Typically pools either (a) fail completely (but perhaps temporarily,
286  * e.g. a top-level vdev going offline), or (b) have localized,
287  * permanent errors (e.g. disk returns the wrong data due to bit flip or
288  * firmware bug).  In case (a), this setting does not matter because the
289  * pool will be suspended and the sync thread will not be able to make
290  * forward progress regardless.  In case (b), because the error is
291  * permanent, the best we can do is leak the minimum amount of space,
292  * which is what setting this flag will do.  Therefore, it is reasonable
293  * for this flag to normally be set, but we chose the more conservative
294  * approach of not setting it, so that there is no possibility of
295  * leaking space in the "partial temporary" failure case.
296  */
297 int zfs_free_leak_on_eio = B_FALSE;
298 
299 /*
300  * Expiration time in milliseconds. This value has two meanings. First it is
301  * used to determine when the spa_deadman() logic should fire. By default the
302  * spa_deadman() will fire if spa_sync() has not completed in 600 seconds.
303  * Secondly, the value determines if an I/O is considered "hung". Any I/O that
304  * has not completed in zfs_deadman_synctime_ms is considered "hung" resulting
305  * in one of three behaviors controlled by zfs_deadman_failmode.
306  */
307 unsigned long zfs_deadman_synctime_ms = 600000UL;
308 
309 /*
310  * This value controls the maximum amount of time zio_wait() will block for an
311  * outstanding IO.  By default this is 300 seconds at which point the "hung"
312  * behavior will be applied as described for zfs_deadman_synctime_ms.
313  */
314 unsigned long zfs_deadman_ziotime_ms = 300000UL;
315 
316 /*
317  * Check time in milliseconds. This defines the frequency at which we check
318  * for hung I/O.
319  */
320 unsigned long zfs_deadman_checktime_ms = 60000UL;
321 
322 /*
323  * By default the deadman is enabled.
324  */
325 int zfs_deadman_enabled = 1;
326 
327 /*
328  * Controls the behavior of the deadman when it detects a "hung" I/O.
329  * Valid values are zfs_deadman_failmode=<wait|continue|panic>.
330  *
331  * wait     - Wait for the "hung" I/O (default)
332  * continue - Attempt to recover from a "hung" I/O
333  * panic    - Panic the system
334  */
335 char *zfs_deadman_failmode = "wait";
336 
337 /*
338  * The worst case is single-sector max-parity RAID-Z blocks, in which
339  * case the space requirement is exactly (VDEV_RAIDZ_MAXPARITY + 1)
340  * times the size; so just assume that.  Add to this the fact that
341  * we can have up to 3 DVAs per bp, and one more factor of 2 because
342  * the block may be dittoed with up to 3 DVAs by ddt_sync().  All together,
343  * the worst case is:
344  *     (VDEV_RAIDZ_MAXPARITY + 1) * SPA_DVAS_PER_BP * 2 == 24
345  */
346 int spa_asize_inflation = 24;
347 
348 /*
349  * Normally, we don't allow the last 3.2% (1/(2^spa_slop_shift)) of space in
350  * the pool to be consumed.  This ensures that we don't run the pool
351  * completely out of space, due to unaccounted changes (e.g. to the MOS).
352  * It also limits the worst-case time to allocate space.  If we have
353  * less than this amount of free space, most ZPL operations (e.g. write,
354  * create) will return ENOSPC.
355  *
356  * Certain operations (e.g. file removal, most administrative actions) can
357  * use half the slop space.  They will only return ENOSPC if less than half
358  * the slop space is free.  Typically, once the pool has less than the slop
359  * space free, the user will use these operations to free up space in the pool.
360  * These are the operations that call dsl_pool_adjustedsize() with the netfree
361  * argument set to TRUE.
362  *
363  * Operations that are almost guaranteed to free up space in the absence of
364  * a pool checkpoint can use up to three quarters of the slop space
365  * (e.g zfs destroy).
366  *
367  * A very restricted set of operations are always permitted, regardless of
368  * the amount of free space.  These are the operations that call
369  * dsl_sync_task(ZFS_SPACE_CHECK_NONE). If these operations result in a net
370  * increase in the amount of space used, it is possible to run the pool
371  * completely out of space, causing it to be permanently read-only.
372  *
373  * Note that on very small pools, the slop space will be larger than
374  * 3.2%, in an effort to have it be at least spa_min_slop (128MB),
375  * but we never allow it to be more than half the pool size.
376  *
377  * See also the comments in zfs_space_check_t.
378  */
379 int spa_slop_shift = 5;
380 uint64_t spa_min_slop = 128 * 1024 * 1024;
381 int spa_allocators = 4;
382 
383 
384 /*PRINTFLIKE2*/
385 void
386 spa_load_failed(spa_t *spa, const char *fmt, ...)
387 {
388 	va_list adx;
389 	char buf[256];
390 
391 	va_start(adx, fmt);
392 	(void) vsnprintf(buf, sizeof (buf), fmt, adx);
393 	va_end(adx);
394 
395 	zfs_dbgmsg("spa_load(%s, config %s): FAILED: %s", spa->spa_name,
396 	    spa->spa_trust_config ? "trusted" : "untrusted", buf);
397 }
398 
399 /*PRINTFLIKE2*/
400 void
401 spa_load_note(spa_t *spa, const char *fmt, ...)
402 {
403 	va_list adx;
404 	char buf[256];
405 
406 	va_start(adx, fmt);
407 	(void) vsnprintf(buf, sizeof (buf), fmt, adx);
408 	va_end(adx);
409 
410 	zfs_dbgmsg("spa_load(%s, config %s): %s", spa->spa_name,
411 	    spa->spa_trust_config ? "trusted" : "untrusted", buf);
412 }
413 
414 /*
415  * By default dedup and user data indirects land in the special class
416  */
417 int zfs_ddt_data_is_special = B_TRUE;
418 int zfs_user_indirect_is_special = B_TRUE;
419 
420 /*
421  * The percentage of special class final space reserved for metadata only.
422  * Once we allocate 100 - zfs_special_class_metadata_reserve_pct we only
423  * let metadata into the class.
424  */
425 int zfs_special_class_metadata_reserve_pct = 25;
426 
427 /*
428  * ==========================================================================
429  * SPA config locking
430  * ==========================================================================
431  */
432 static void
433 spa_config_lock_init(spa_t *spa)
434 {
435 	for (int i = 0; i < SCL_LOCKS; i++) {
436 		spa_config_lock_t *scl = &spa->spa_config_lock[i];
437 		mutex_init(&scl->scl_lock, NULL, MUTEX_DEFAULT, NULL);
438 		cv_init(&scl->scl_cv, NULL, CV_DEFAULT, NULL);
439 		zfs_refcount_create_untracked(&scl->scl_count);
440 		scl->scl_writer = NULL;
441 		scl->scl_write_wanted = 0;
442 	}
443 }
444 
445 static void
446 spa_config_lock_destroy(spa_t *spa)
447 {
448 	for (int i = 0; i < SCL_LOCKS; i++) {
449 		spa_config_lock_t *scl = &spa->spa_config_lock[i];
450 		mutex_destroy(&scl->scl_lock);
451 		cv_destroy(&scl->scl_cv);
452 		zfs_refcount_destroy(&scl->scl_count);
453 		ASSERT(scl->scl_writer == NULL);
454 		ASSERT(scl->scl_write_wanted == 0);
455 	}
456 }
457 
458 int
459 spa_config_tryenter(spa_t *spa, int locks, void *tag, krw_t rw)
460 {
461 	for (int i = 0; i < SCL_LOCKS; i++) {
462 		spa_config_lock_t *scl = &spa->spa_config_lock[i];
463 		if (!(locks & (1 << i)))
464 			continue;
465 		mutex_enter(&scl->scl_lock);
466 		if (rw == RW_READER) {
467 			if (scl->scl_writer || scl->scl_write_wanted) {
468 				mutex_exit(&scl->scl_lock);
469 				spa_config_exit(spa, locks & ((1 << i) - 1),
470 				    tag);
471 				return (0);
472 			}
473 		} else {
474 			ASSERT(scl->scl_writer != curthread);
475 			if (!zfs_refcount_is_zero(&scl->scl_count)) {
476 				mutex_exit(&scl->scl_lock);
477 				spa_config_exit(spa, locks & ((1 << i) - 1),
478 				    tag);
479 				return (0);
480 			}
481 			scl->scl_writer = curthread;
482 		}
483 		(void) zfs_refcount_add(&scl->scl_count, tag);
484 		mutex_exit(&scl->scl_lock);
485 	}
486 	return (1);
487 }
488 
489 void
490 spa_config_enter(spa_t *spa, int locks, const void *tag, krw_t rw)
491 {
492 	int wlocks_held = 0;
493 
494 	ASSERT3U(SCL_LOCKS, <, sizeof (wlocks_held) * NBBY);
495 
496 	for (int i = 0; i < SCL_LOCKS; i++) {
497 		spa_config_lock_t *scl = &spa->spa_config_lock[i];
498 		if (scl->scl_writer == curthread)
499 			wlocks_held |= (1 << i);
500 		if (!(locks & (1 << i)))
501 			continue;
502 		mutex_enter(&scl->scl_lock);
503 		if (rw == RW_READER) {
504 			while (scl->scl_writer || scl->scl_write_wanted) {
505 				cv_wait(&scl->scl_cv, &scl->scl_lock);
506 			}
507 		} else {
508 			ASSERT(scl->scl_writer != curthread);
509 			while (!zfs_refcount_is_zero(&scl->scl_count)) {
510 				scl->scl_write_wanted++;
511 				cv_wait(&scl->scl_cv, &scl->scl_lock);
512 				scl->scl_write_wanted--;
513 			}
514 			scl->scl_writer = curthread;
515 		}
516 		(void) zfs_refcount_add(&scl->scl_count, tag);
517 		mutex_exit(&scl->scl_lock);
518 	}
519 	ASSERT3U(wlocks_held, <=, locks);
520 }
521 
522 void
523 spa_config_exit(spa_t *spa, int locks, const void *tag)
524 {
525 	for (int i = SCL_LOCKS - 1; i >= 0; i--) {
526 		spa_config_lock_t *scl = &spa->spa_config_lock[i];
527 		if (!(locks & (1 << i)))
528 			continue;
529 		mutex_enter(&scl->scl_lock);
530 		ASSERT(!zfs_refcount_is_zero(&scl->scl_count));
531 		if (zfs_refcount_remove(&scl->scl_count, tag) == 0) {
532 			ASSERT(scl->scl_writer == NULL ||
533 			    scl->scl_writer == curthread);
534 			scl->scl_writer = NULL;	/* OK in either case */
535 			cv_broadcast(&scl->scl_cv);
536 		}
537 		mutex_exit(&scl->scl_lock);
538 	}
539 }
540 
541 int
542 spa_config_held(spa_t *spa, int locks, krw_t rw)
543 {
544 	int locks_held = 0;
545 
546 	for (int i = 0; i < SCL_LOCKS; i++) {
547 		spa_config_lock_t *scl = &spa->spa_config_lock[i];
548 		if (!(locks & (1 << i)))
549 			continue;
550 		if ((rw == RW_READER &&
551 		    !zfs_refcount_is_zero(&scl->scl_count)) ||
552 		    (rw == RW_WRITER && scl->scl_writer == curthread))
553 			locks_held |= 1 << i;
554 	}
555 
556 	return (locks_held);
557 }
558 
559 /*
560  * ==========================================================================
561  * SPA namespace functions
562  * ==========================================================================
563  */
564 
565 /*
566  * Lookup the named spa_t in the AVL tree.  The spa_namespace_lock must be held.
567  * Returns NULL if no matching spa_t is found.
568  */
569 spa_t *
570 spa_lookup(const char *name)
571 {
572 	static spa_t search;	/* spa_t is large; don't allocate on stack */
573 	spa_t *spa;
574 	avl_index_t where;
575 	char *cp;
576 
577 	ASSERT(MUTEX_HELD(&spa_namespace_lock));
578 
579 	(void) strlcpy(search.spa_name, name, sizeof (search.spa_name));
580 
581 	/*
582 	 * If it's a full dataset name, figure out the pool name and
583 	 * just use that.
584 	 */
585 	cp = strpbrk(search.spa_name, "/@#");
586 	if (cp != NULL)
587 		*cp = '\0';
588 
589 	spa = avl_find(&spa_namespace_avl, &search, &where);
590 
591 	return (spa);
592 }
593 
594 /*
595  * Fires when spa_sync has not completed within zfs_deadman_synctime_ms.
596  * If the zfs_deadman_enabled flag is set then it inspects all vdev queues
597  * looking for potentially hung I/Os.
598  */
599 void
600 spa_deadman(void *arg)
601 {
602 	spa_t *spa = arg;
603 
604 	/* Disable the deadman if the pool is suspended. */
605 	if (spa_suspended(spa))
606 		return;
607 
608 	zfs_dbgmsg("slow spa_sync: started %llu seconds ago, calls %llu",
609 	    (gethrtime() - spa->spa_sync_starttime) / NANOSEC,
610 	    ++spa->spa_deadman_calls);
611 	if (zfs_deadman_enabled)
612 		vdev_deadman(spa->spa_root_vdev, FTAG);
613 
614 	spa->spa_deadman_tqid = taskq_dispatch_delay(system_delay_taskq,
615 	    spa_deadman, spa, TQ_SLEEP, ddi_get_lbolt() +
616 	    MSEC_TO_TICK(zfs_deadman_checktime_ms));
617 }
618 
619 static int
620 spa_log_sm_sort_by_txg(const void *va, const void *vb)
621 {
622 	const spa_log_sm_t *a = va;
623 	const spa_log_sm_t *b = vb;
624 
625 	return (TREE_CMP(a->sls_txg, b->sls_txg));
626 }
627 
628 /*
629  * Create an uninitialized spa_t with the given name.  Requires
630  * spa_namespace_lock.  The caller must ensure that the spa_t doesn't already
631  * exist by calling spa_lookup() first.
632  */
633 spa_t *
634 spa_add(const char *name, nvlist_t *config, const char *altroot)
635 {
636 	spa_t *spa;
637 	spa_config_dirent_t *dp;
638 
639 	ASSERT(MUTEX_HELD(&spa_namespace_lock));
640 
641 	spa = kmem_zalloc(sizeof (spa_t), KM_SLEEP);
642 
643 	mutex_init(&spa->spa_async_lock, NULL, MUTEX_DEFAULT, NULL);
644 	mutex_init(&spa->spa_errlist_lock, NULL, MUTEX_DEFAULT, NULL);
645 	mutex_init(&spa->spa_errlog_lock, NULL, MUTEX_DEFAULT, NULL);
646 	mutex_init(&spa->spa_evicting_os_lock, NULL, MUTEX_DEFAULT, NULL);
647 	mutex_init(&spa->spa_history_lock, NULL, MUTEX_DEFAULT, NULL);
648 	mutex_init(&spa->spa_proc_lock, NULL, MUTEX_DEFAULT, NULL);
649 	mutex_init(&spa->spa_props_lock, NULL, MUTEX_DEFAULT, NULL);
650 	mutex_init(&spa->spa_cksum_tmpls_lock, NULL, MUTEX_DEFAULT, NULL);
651 	mutex_init(&spa->spa_scrub_lock, NULL, MUTEX_DEFAULT, NULL);
652 	mutex_init(&spa->spa_suspend_lock, NULL, MUTEX_DEFAULT, NULL);
653 	mutex_init(&spa->spa_vdev_top_lock, NULL, MUTEX_DEFAULT, NULL);
654 	mutex_init(&spa->spa_feat_stats_lock, NULL, MUTEX_DEFAULT, NULL);
655 	mutex_init(&spa->spa_flushed_ms_lock, NULL, MUTEX_DEFAULT, NULL);
656 	mutex_init(&spa->spa_activities_lock, NULL, MUTEX_DEFAULT, NULL);
657 
658 	cv_init(&spa->spa_async_cv, NULL, CV_DEFAULT, NULL);
659 	cv_init(&spa->spa_evicting_os_cv, NULL, CV_DEFAULT, NULL);
660 	cv_init(&spa->spa_proc_cv, NULL, CV_DEFAULT, NULL);
661 	cv_init(&spa->spa_scrub_io_cv, NULL, CV_DEFAULT, NULL);
662 	cv_init(&spa->spa_suspend_cv, NULL, CV_DEFAULT, NULL);
663 	cv_init(&spa->spa_activities_cv, NULL, CV_DEFAULT, NULL);
664 	cv_init(&spa->spa_waiters_cv, NULL, CV_DEFAULT, NULL);
665 
666 	for (int t = 0; t < TXG_SIZE; t++)
667 		bplist_create(&spa->spa_free_bplist[t]);
668 
669 	(void) strlcpy(spa->spa_name, name, sizeof (spa->spa_name));
670 	spa->spa_state = POOL_STATE_UNINITIALIZED;
671 	spa->spa_freeze_txg = UINT64_MAX;
672 	spa->spa_final_txg = UINT64_MAX;
673 	spa->spa_load_max_txg = UINT64_MAX;
674 	spa->spa_proc = &p0;
675 	spa->spa_proc_state = SPA_PROC_NONE;
676 	spa->spa_trust_config = B_TRUE;
677 	spa->spa_hostid = zone_get_hostid(NULL);
678 
679 	spa->spa_deadman_synctime = MSEC2NSEC(zfs_deadman_synctime_ms);
680 	spa->spa_deadman_ziotime = MSEC2NSEC(zfs_deadman_ziotime_ms);
681 	spa_set_deadman_failmode(spa, zfs_deadman_failmode);
682 
683 	zfs_refcount_create(&spa->spa_refcount);
684 	spa_config_lock_init(spa);
685 	spa_stats_init(spa);
686 
687 	avl_add(&spa_namespace_avl, spa);
688 
689 	/*
690 	 * Set the alternate root, if there is one.
691 	 */
692 	if (altroot)
693 		spa->spa_root = spa_strdup(altroot);
694 
695 	spa->spa_alloc_count = spa_allocators;
696 	spa->spa_alloc_locks = kmem_zalloc(spa->spa_alloc_count *
697 	    sizeof (kmutex_t), KM_SLEEP);
698 	spa->spa_alloc_trees = kmem_zalloc(spa->spa_alloc_count *
699 	    sizeof (avl_tree_t), KM_SLEEP);
700 	for (int i = 0; i < spa->spa_alloc_count; i++) {
701 		mutex_init(&spa->spa_alloc_locks[i], NULL, MUTEX_DEFAULT, NULL);
702 		avl_create(&spa->spa_alloc_trees[i], zio_bookmark_compare,
703 		    sizeof (zio_t), offsetof(zio_t, io_alloc_node));
704 	}
705 	avl_create(&spa->spa_metaslabs_by_flushed, metaslab_sort_by_flushed,
706 	    sizeof (metaslab_t), offsetof(metaslab_t, ms_spa_txg_node));
707 	avl_create(&spa->spa_sm_logs_by_txg, spa_log_sm_sort_by_txg,
708 	    sizeof (spa_log_sm_t), offsetof(spa_log_sm_t, sls_node));
709 	list_create(&spa->spa_log_summary, sizeof (log_summary_entry_t),
710 	    offsetof(log_summary_entry_t, lse_node));
711 
712 	/*
713 	 * Every pool starts with the default cachefile
714 	 */
715 	list_create(&spa->spa_config_list, sizeof (spa_config_dirent_t),
716 	    offsetof(spa_config_dirent_t, scd_link));
717 
718 	dp = kmem_zalloc(sizeof (spa_config_dirent_t), KM_SLEEP);
719 	dp->scd_path = altroot ? NULL : spa_strdup(spa_config_path);
720 	list_insert_head(&spa->spa_config_list, dp);
721 
722 	VERIFY(nvlist_alloc(&spa->spa_load_info, NV_UNIQUE_NAME,
723 	    KM_SLEEP) == 0);
724 
725 	if (config != NULL) {
726 		nvlist_t *features;
727 
728 		if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_FEATURES_FOR_READ,
729 		    &features) == 0) {
730 			VERIFY(nvlist_dup(features, &spa->spa_label_features,
731 			    0) == 0);
732 		}
733 
734 		VERIFY(nvlist_dup(config, &spa->spa_config, 0) == 0);
735 	}
736 
737 	if (spa->spa_label_features == NULL) {
738 		VERIFY(nvlist_alloc(&spa->spa_label_features, NV_UNIQUE_NAME,
739 		    KM_SLEEP) == 0);
740 	}
741 
742 	spa->spa_min_ashift = INT_MAX;
743 	spa->spa_max_ashift = 0;
744 
745 	/* Reset cached value */
746 	spa->spa_dedup_dspace = ~0ULL;
747 
748 	/*
749 	 * As a pool is being created, treat all features as disabled by
750 	 * setting SPA_FEATURE_DISABLED for all entries in the feature
751 	 * refcount cache.
752 	 */
753 	for (int i = 0; i < SPA_FEATURES; i++) {
754 		spa->spa_feat_refcount_cache[i] = SPA_FEATURE_DISABLED;
755 	}
756 
757 	list_create(&spa->spa_leaf_list, sizeof (vdev_t),
758 	    offsetof(vdev_t, vdev_leaf_node));
759 
760 	return (spa);
761 }
762 
763 /*
764  * Removes a spa_t from the namespace, freeing up any memory used.  Requires
765  * spa_namespace_lock.  This is called only after the spa_t has been closed and
766  * deactivated.
767  */
768 void
769 spa_remove(spa_t *spa)
770 {
771 	spa_config_dirent_t *dp;
772 
773 	ASSERT(MUTEX_HELD(&spa_namespace_lock));
774 	ASSERT(spa_state(spa) == POOL_STATE_UNINITIALIZED);
775 	ASSERT3U(zfs_refcount_count(&spa->spa_refcount), ==, 0);
776 	ASSERT0(spa->spa_waiters);
777 
778 	nvlist_free(spa->spa_config_splitting);
779 
780 	avl_remove(&spa_namespace_avl, spa);
781 	cv_broadcast(&spa_namespace_cv);
782 
783 	if (spa->spa_root)
784 		spa_strfree(spa->spa_root);
785 
786 	while ((dp = list_head(&spa->spa_config_list)) != NULL) {
787 		list_remove(&spa->spa_config_list, dp);
788 		if (dp->scd_path != NULL)
789 			spa_strfree(dp->scd_path);
790 		kmem_free(dp, sizeof (spa_config_dirent_t));
791 	}
792 
793 	for (int i = 0; i < spa->spa_alloc_count; i++) {
794 		avl_destroy(&spa->spa_alloc_trees[i]);
795 		mutex_destroy(&spa->spa_alloc_locks[i]);
796 	}
797 	kmem_free(spa->spa_alloc_locks, spa->spa_alloc_count *
798 	    sizeof (kmutex_t));
799 	kmem_free(spa->spa_alloc_trees, spa->spa_alloc_count *
800 	    sizeof (avl_tree_t));
801 
802 	avl_destroy(&spa->spa_metaslabs_by_flushed);
803 	avl_destroy(&spa->spa_sm_logs_by_txg);
804 	list_destroy(&spa->spa_log_summary);
805 	list_destroy(&spa->spa_config_list);
806 	list_destroy(&spa->spa_leaf_list);
807 
808 	nvlist_free(spa->spa_label_features);
809 	nvlist_free(spa->spa_load_info);
810 	nvlist_free(spa->spa_feat_stats);
811 	spa_config_set(spa, NULL);
812 
813 	zfs_refcount_destroy(&spa->spa_refcount);
814 
815 	spa_stats_destroy(spa);
816 	spa_config_lock_destroy(spa);
817 
818 	for (int t = 0; t < TXG_SIZE; t++)
819 		bplist_destroy(&spa->spa_free_bplist[t]);
820 
821 	zio_checksum_templates_free(spa);
822 
823 	cv_destroy(&spa->spa_async_cv);
824 	cv_destroy(&spa->spa_evicting_os_cv);
825 	cv_destroy(&spa->spa_proc_cv);
826 	cv_destroy(&spa->spa_scrub_io_cv);
827 	cv_destroy(&spa->spa_suspend_cv);
828 	cv_destroy(&spa->spa_activities_cv);
829 	cv_destroy(&spa->spa_waiters_cv);
830 
831 	mutex_destroy(&spa->spa_flushed_ms_lock);
832 	mutex_destroy(&spa->spa_async_lock);
833 	mutex_destroy(&spa->spa_errlist_lock);
834 	mutex_destroy(&spa->spa_errlog_lock);
835 	mutex_destroy(&spa->spa_evicting_os_lock);
836 	mutex_destroy(&spa->spa_history_lock);
837 	mutex_destroy(&spa->spa_proc_lock);
838 	mutex_destroy(&spa->spa_props_lock);
839 	mutex_destroy(&spa->spa_cksum_tmpls_lock);
840 	mutex_destroy(&spa->spa_scrub_lock);
841 	mutex_destroy(&spa->spa_suspend_lock);
842 	mutex_destroy(&spa->spa_vdev_top_lock);
843 	mutex_destroy(&spa->spa_feat_stats_lock);
844 	mutex_destroy(&spa->spa_activities_lock);
845 
846 	kmem_free(spa, sizeof (spa_t));
847 }
848 
849 /*
850  * Given a pool, return the next pool in the namespace, or NULL if there is
851  * none.  If 'prev' is NULL, return the first pool.
852  */
853 spa_t *
854 spa_next(spa_t *prev)
855 {
856 	ASSERT(MUTEX_HELD(&spa_namespace_lock));
857 
858 	if (prev)
859 		return (AVL_NEXT(&spa_namespace_avl, prev));
860 	else
861 		return (avl_first(&spa_namespace_avl));
862 }
863 
864 /*
865  * ==========================================================================
866  * SPA refcount functions
867  * ==========================================================================
868  */
869 
870 /*
871  * Add a reference to the given spa_t.  Must have at least one reference, or
872  * have the namespace lock held.
873  */
874 void
875 spa_open_ref(spa_t *spa, void *tag)
876 {
877 	ASSERT(zfs_refcount_count(&spa->spa_refcount) >= spa->spa_minref ||
878 	    MUTEX_HELD(&spa_namespace_lock));
879 	(void) zfs_refcount_add(&spa->spa_refcount, tag);
880 }
881 
882 /*
883  * Remove a reference to the given spa_t.  Must have at least one reference, or
884  * have the namespace lock held.
885  */
886 void
887 spa_close(spa_t *spa, void *tag)
888 {
889 	ASSERT(zfs_refcount_count(&spa->spa_refcount) > spa->spa_minref ||
890 	    MUTEX_HELD(&spa_namespace_lock));
891 	(void) zfs_refcount_remove(&spa->spa_refcount, tag);
892 }
893 
894 /*
895  * Remove a reference to the given spa_t held by a dsl dir that is
896  * being asynchronously released.  Async releases occur from a taskq
897  * performing eviction of dsl datasets and dirs.  The namespace lock
898  * isn't held and the hold by the object being evicted may contribute to
899  * spa_minref (e.g. dataset or directory released during pool export),
900  * so the asserts in spa_close() do not apply.
901  */
902 void
903 spa_async_close(spa_t *spa, void *tag)
904 {
905 	(void) zfs_refcount_remove(&spa->spa_refcount, tag);
906 }
907 
908 /*
909  * Check to see if the spa refcount is zero.  Must be called with
910  * spa_namespace_lock held.  We really compare against spa_minref, which is the
911  * number of references acquired when opening a pool
912  */
913 boolean_t
914 spa_refcount_zero(spa_t *spa)
915 {
916 	ASSERT(MUTEX_HELD(&spa_namespace_lock));
917 
918 	return (zfs_refcount_count(&spa->spa_refcount) == spa->spa_minref);
919 }
920 
921 /*
922  * ==========================================================================
923  * SPA spare and l2cache tracking
924  * ==========================================================================
925  */
926 
927 /*
928  * Hot spares and cache devices are tracked using the same code below,
929  * for 'auxiliary' devices.
930  */
931 
932 typedef struct spa_aux {
933 	uint64_t	aux_guid;
934 	uint64_t	aux_pool;
935 	avl_node_t	aux_avl;
936 	int		aux_count;
937 } spa_aux_t;
938 
939 static inline int
940 spa_aux_compare(const void *a, const void *b)
941 {
942 	const spa_aux_t *sa = (const spa_aux_t *)a;
943 	const spa_aux_t *sb = (const spa_aux_t *)b;
944 
945 	return (TREE_CMP(sa->aux_guid, sb->aux_guid));
946 }
947 
948 static void
949 spa_aux_add(vdev_t *vd, avl_tree_t *avl)
950 {
951 	avl_index_t where;
952 	spa_aux_t search;
953 	spa_aux_t *aux;
954 
955 	search.aux_guid = vd->vdev_guid;
956 	if ((aux = avl_find(avl, &search, &where)) != NULL) {
957 		aux->aux_count++;
958 	} else {
959 		aux = kmem_zalloc(sizeof (spa_aux_t), KM_SLEEP);
960 		aux->aux_guid = vd->vdev_guid;
961 		aux->aux_count = 1;
962 		avl_insert(avl, aux, where);
963 	}
964 }
965 
966 static void
967 spa_aux_remove(vdev_t *vd, avl_tree_t *avl)
968 {
969 	spa_aux_t search;
970 	spa_aux_t *aux;
971 	avl_index_t where;
972 
973 	search.aux_guid = vd->vdev_guid;
974 	aux = avl_find(avl, &search, &where);
975 
976 	ASSERT(aux != NULL);
977 
978 	if (--aux->aux_count == 0) {
979 		avl_remove(avl, aux);
980 		kmem_free(aux, sizeof (spa_aux_t));
981 	} else if (aux->aux_pool == spa_guid(vd->vdev_spa)) {
982 		aux->aux_pool = 0ULL;
983 	}
984 }
985 
986 static boolean_t
987 spa_aux_exists(uint64_t guid, uint64_t *pool, int *refcnt, avl_tree_t *avl)
988 {
989 	spa_aux_t search, *found;
990 
991 	search.aux_guid = guid;
992 	found = avl_find(avl, &search, NULL);
993 
994 	if (pool) {
995 		if (found)
996 			*pool = found->aux_pool;
997 		else
998 			*pool = 0ULL;
999 	}
1000 
1001 	if (refcnt) {
1002 		if (found)
1003 			*refcnt = found->aux_count;
1004 		else
1005 			*refcnt = 0;
1006 	}
1007 
1008 	return (found != NULL);
1009 }
1010 
1011 static void
1012 spa_aux_activate(vdev_t *vd, avl_tree_t *avl)
1013 {
1014 	spa_aux_t search, *found;
1015 	avl_index_t where;
1016 
1017 	search.aux_guid = vd->vdev_guid;
1018 	found = avl_find(avl, &search, &where);
1019 	ASSERT(found != NULL);
1020 	ASSERT(found->aux_pool == 0ULL);
1021 
1022 	found->aux_pool = spa_guid(vd->vdev_spa);
1023 }
1024 
1025 /*
1026  * Spares are tracked globally due to the following constraints:
1027  *
1028  * 	- A spare may be part of multiple pools.
1029  * 	- A spare may be added to a pool even if it's actively in use within
1030  *	  another pool.
1031  * 	- A spare in use in any pool can only be the source of a replacement if
1032  *	  the target is a spare in the same pool.
1033  *
1034  * We keep track of all spares on the system through the use of a reference
1035  * counted AVL tree.  When a vdev is added as a spare, or used as a replacement
1036  * spare, then we bump the reference count in the AVL tree.  In addition, we set
1037  * the 'vdev_isspare' member to indicate that the device is a spare (active or
1038  * inactive).  When a spare is made active (used to replace a device in the
1039  * pool), we also keep track of which pool its been made a part of.
1040  *
1041  * The 'spa_spare_lock' protects the AVL tree.  These functions are normally
1042  * called under the spa_namespace lock as part of vdev reconfiguration.  The
1043  * separate spare lock exists for the status query path, which does not need to
1044  * be completely consistent with respect to other vdev configuration changes.
1045  */
1046 
1047 static int
1048 spa_spare_compare(const void *a, const void *b)
1049 {
1050 	return (spa_aux_compare(a, b));
1051 }
1052 
1053 void
1054 spa_spare_add(vdev_t *vd)
1055 {
1056 	mutex_enter(&spa_spare_lock);
1057 	ASSERT(!vd->vdev_isspare);
1058 	spa_aux_add(vd, &spa_spare_avl);
1059 	vd->vdev_isspare = B_TRUE;
1060 	mutex_exit(&spa_spare_lock);
1061 }
1062 
1063 void
1064 spa_spare_remove(vdev_t *vd)
1065 {
1066 	mutex_enter(&spa_spare_lock);
1067 	ASSERT(vd->vdev_isspare);
1068 	spa_aux_remove(vd, &spa_spare_avl);
1069 	vd->vdev_isspare = B_FALSE;
1070 	mutex_exit(&spa_spare_lock);
1071 }
1072 
1073 boolean_t
1074 spa_spare_exists(uint64_t guid, uint64_t *pool, int *refcnt)
1075 {
1076 	boolean_t found;
1077 
1078 	mutex_enter(&spa_spare_lock);
1079 	found = spa_aux_exists(guid, pool, refcnt, &spa_spare_avl);
1080 	mutex_exit(&spa_spare_lock);
1081 
1082 	return (found);
1083 }
1084 
1085 void
1086 spa_spare_activate(vdev_t *vd)
1087 {
1088 	mutex_enter(&spa_spare_lock);
1089 	ASSERT(vd->vdev_isspare);
1090 	spa_aux_activate(vd, &spa_spare_avl);
1091 	mutex_exit(&spa_spare_lock);
1092 }
1093 
1094 /*
1095  * Level 2 ARC devices are tracked globally for the same reasons as spares.
1096  * Cache devices currently only support one pool per cache device, and so
1097  * for these devices the aux reference count is currently unused beyond 1.
1098  */
1099 
1100 static int
1101 spa_l2cache_compare(const void *a, const void *b)
1102 {
1103 	return (spa_aux_compare(a, b));
1104 }
1105 
1106 void
1107 spa_l2cache_add(vdev_t *vd)
1108 {
1109 	mutex_enter(&spa_l2cache_lock);
1110 	ASSERT(!vd->vdev_isl2cache);
1111 	spa_aux_add(vd, &spa_l2cache_avl);
1112 	vd->vdev_isl2cache = B_TRUE;
1113 	mutex_exit(&spa_l2cache_lock);
1114 }
1115 
1116 void
1117 spa_l2cache_remove(vdev_t *vd)
1118 {
1119 	mutex_enter(&spa_l2cache_lock);
1120 	ASSERT(vd->vdev_isl2cache);
1121 	spa_aux_remove(vd, &spa_l2cache_avl);
1122 	vd->vdev_isl2cache = B_FALSE;
1123 	mutex_exit(&spa_l2cache_lock);
1124 }
1125 
1126 boolean_t
1127 spa_l2cache_exists(uint64_t guid, uint64_t *pool)
1128 {
1129 	boolean_t found;
1130 
1131 	mutex_enter(&spa_l2cache_lock);
1132 	found = spa_aux_exists(guid, pool, NULL, &spa_l2cache_avl);
1133 	mutex_exit(&spa_l2cache_lock);
1134 
1135 	return (found);
1136 }
1137 
1138 void
1139 spa_l2cache_activate(vdev_t *vd)
1140 {
1141 	mutex_enter(&spa_l2cache_lock);
1142 	ASSERT(vd->vdev_isl2cache);
1143 	spa_aux_activate(vd, &spa_l2cache_avl);
1144 	mutex_exit(&spa_l2cache_lock);
1145 }
1146 
1147 /*
1148  * ==========================================================================
1149  * SPA vdev locking
1150  * ==========================================================================
1151  */
1152 
1153 /*
1154  * Lock the given spa_t for the purpose of adding or removing a vdev.
1155  * Grabs the global spa_namespace_lock plus the spa config lock for writing.
1156  * It returns the next transaction group for the spa_t.
1157  */
1158 uint64_t
1159 spa_vdev_enter(spa_t *spa)
1160 {
1161 	mutex_enter(&spa->spa_vdev_top_lock);
1162 	mutex_enter(&spa_namespace_lock);
1163 
1164 	vdev_autotrim_stop_all(spa);
1165 
1166 	return (spa_vdev_config_enter(spa));
1167 }
1168 
1169 /*
1170  * The same as spa_vdev_enter() above but additionally takes the guid of
1171  * the vdev being detached.  When there is a rebuild in process it will be
1172  * suspended while the vdev tree is modified then resumed by spa_vdev_exit().
1173  * The rebuild is canceled if only a single child remains after the detach.
1174  */
1175 uint64_t
1176 spa_vdev_detach_enter(spa_t *spa, uint64_t guid)
1177 {
1178 	mutex_enter(&spa->spa_vdev_top_lock);
1179 	mutex_enter(&spa_namespace_lock);
1180 
1181 	vdev_autotrim_stop_all(spa);
1182 
1183 	if (guid != 0) {
1184 		vdev_t *vd = spa_lookup_by_guid(spa, guid, B_FALSE);
1185 		if (vd) {
1186 			vdev_rebuild_stop_wait(vd->vdev_top);
1187 		}
1188 	}
1189 
1190 	return (spa_vdev_config_enter(spa));
1191 }
1192 
1193 /*
1194  * Internal implementation for spa_vdev_enter().  Used when a vdev
1195  * operation requires multiple syncs (i.e. removing a device) while
1196  * keeping the spa_namespace_lock held.
1197  */
1198 uint64_t
1199 spa_vdev_config_enter(spa_t *spa)
1200 {
1201 	ASSERT(MUTEX_HELD(&spa_namespace_lock));
1202 
1203 	spa_config_enter(spa, SCL_ALL, spa, RW_WRITER);
1204 
1205 	return (spa_last_synced_txg(spa) + 1);
1206 }
1207 
1208 /*
1209  * Used in combination with spa_vdev_config_enter() to allow the syncing
1210  * of multiple transactions without releasing the spa_namespace_lock.
1211  */
1212 void
1213 spa_vdev_config_exit(spa_t *spa, vdev_t *vd, uint64_t txg, int error, char *tag)
1214 {
1215 	ASSERT(MUTEX_HELD(&spa_namespace_lock));
1216 
1217 	int config_changed = B_FALSE;
1218 
1219 	ASSERT(txg > spa_last_synced_txg(spa));
1220 
1221 	spa->spa_pending_vdev = NULL;
1222 
1223 	/*
1224 	 * Reassess the DTLs.
1225 	 */
1226 	vdev_dtl_reassess(spa->spa_root_vdev, 0, 0, B_FALSE, B_FALSE);
1227 
1228 	if (error == 0 && !list_is_empty(&spa->spa_config_dirty_list)) {
1229 		config_changed = B_TRUE;
1230 		spa->spa_config_generation++;
1231 	}
1232 
1233 	/*
1234 	 * Verify the metaslab classes.
1235 	 */
1236 	ASSERT(metaslab_class_validate(spa_normal_class(spa)) == 0);
1237 	ASSERT(metaslab_class_validate(spa_log_class(spa)) == 0);
1238 	ASSERT(metaslab_class_validate(spa_special_class(spa)) == 0);
1239 	ASSERT(metaslab_class_validate(spa_dedup_class(spa)) == 0);
1240 
1241 	spa_config_exit(spa, SCL_ALL, spa);
1242 
1243 	/*
1244 	 * Panic the system if the specified tag requires it.  This
1245 	 * is useful for ensuring that configurations are updated
1246 	 * transactionally.
1247 	 */
1248 	if (zio_injection_enabled)
1249 		zio_handle_panic_injection(spa, tag, 0);
1250 
1251 	/*
1252 	 * Note: this txg_wait_synced() is important because it ensures
1253 	 * that there won't be more than one config change per txg.
1254 	 * This allows us to use the txg as the generation number.
1255 	 */
1256 	if (error == 0)
1257 		txg_wait_synced(spa->spa_dsl_pool, txg);
1258 
1259 	if (vd != NULL) {
1260 		ASSERT(!vd->vdev_detached || vd->vdev_dtl_sm == NULL);
1261 		if (vd->vdev_ops->vdev_op_leaf) {
1262 			mutex_enter(&vd->vdev_initialize_lock);
1263 			vdev_initialize_stop(vd, VDEV_INITIALIZE_CANCELED,
1264 			    NULL);
1265 			mutex_exit(&vd->vdev_initialize_lock);
1266 
1267 			mutex_enter(&vd->vdev_trim_lock);
1268 			vdev_trim_stop(vd, VDEV_TRIM_CANCELED, NULL);
1269 			mutex_exit(&vd->vdev_trim_lock);
1270 		}
1271 
1272 		/*
1273 		 * The vdev may be both a leaf and top-level device.
1274 		 */
1275 		vdev_autotrim_stop_wait(vd);
1276 
1277 		spa_config_enter(spa, SCL_ALL, spa, RW_WRITER);
1278 		vdev_free(vd);
1279 		spa_config_exit(spa, SCL_ALL, spa);
1280 	}
1281 
1282 	/*
1283 	 * If the config changed, update the config cache.
1284 	 */
1285 	if (config_changed)
1286 		spa_write_cachefile(spa, B_FALSE, B_TRUE);
1287 }
1288 
1289 /*
1290  * Unlock the spa_t after adding or removing a vdev.  Besides undoing the
1291  * locking of spa_vdev_enter(), we also want make sure the transactions have
1292  * synced to disk, and then update the global configuration cache with the new
1293  * information.
1294  */
1295 int
1296 spa_vdev_exit(spa_t *spa, vdev_t *vd, uint64_t txg, int error)
1297 {
1298 	vdev_autotrim_restart(spa);
1299 	vdev_rebuild_restart(spa);
1300 
1301 	spa_vdev_config_exit(spa, vd, txg, error, FTAG);
1302 	mutex_exit(&spa_namespace_lock);
1303 	mutex_exit(&spa->spa_vdev_top_lock);
1304 
1305 	return (error);
1306 }
1307 
1308 /*
1309  * Lock the given spa_t for the purpose of changing vdev state.
1310  */
1311 void
1312 spa_vdev_state_enter(spa_t *spa, int oplocks)
1313 {
1314 	int locks = SCL_STATE_ALL | oplocks;
1315 
1316 	/*
1317 	 * Root pools may need to read of the underlying devfs filesystem
1318 	 * when opening up a vdev.  Unfortunately if we're holding the
1319 	 * SCL_ZIO lock it will result in a deadlock when we try to issue
1320 	 * the read from the root filesystem.  Instead we "prefetch"
1321 	 * the associated vnodes that we need prior to opening the
1322 	 * underlying devices and cache them so that we can prevent
1323 	 * any I/O when we are doing the actual open.
1324 	 */
1325 	if (spa_is_root(spa)) {
1326 		int low = locks & ~(SCL_ZIO - 1);
1327 		int high = locks & ~low;
1328 
1329 		spa_config_enter(spa, high, spa, RW_WRITER);
1330 		vdev_hold(spa->spa_root_vdev);
1331 		spa_config_enter(spa, low, spa, RW_WRITER);
1332 	} else {
1333 		spa_config_enter(spa, locks, spa, RW_WRITER);
1334 	}
1335 	spa->spa_vdev_locks = locks;
1336 }
1337 
1338 int
1339 spa_vdev_state_exit(spa_t *spa, vdev_t *vd, int error)
1340 {
1341 	boolean_t config_changed = B_FALSE;
1342 	vdev_t *vdev_top;
1343 
1344 	if (vd == NULL || vd == spa->spa_root_vdev) {
1345 		vdev_top = spa->spa_root_vdev;
1346 	} else {
1347 		vdev_top = vd->vdev_top;
1348 	}
1349 
1350 	if (vd != NULL || error == 0)
1351 		vdev_dtl_reassess(vdev_top, 0, 0, B_FALSE, B_FALSE);
1352 
1353 	if (vd != NULL) {
1354 		if (vd != spa->spa_root_vdev)
1355 			vdev_state_dirty(vdev_top);
1356 
1357 		config_changed = B_TRUE;
1358 		spa->spa_config_generation++;
1359 	}
1360 
1361 	if (spa_is_root(spa))
1362 		vdev_rele(spa->spa_root_vdev);
1363 
1364 	ASSERT3U(spa->spa_vdev_locks, >=, SCL_STATE_ALL);
1365 	spa_config_exit(spa, spa->spa_vdev_locks, spa);
1366 
1367 	/*
1368 	 * If anything changed, wait for it to sync.  This ensures that,
1369 	 * from the system administrator's perspective, zpool(1M) commands
1370 	 * are synchronous.  This is important for things like zpool offline:
1371 	 * when the command completes, you expect no further I/O from ZFS.
1372 	 */
1373 	if (vd != NULL)
1374 		txg_wait_synced(spa->spa_dsl_pool, 0);
1375 
1376 	/*
1377 	 * If the config changed, update the config cache.
1378 	 */
1379 	if (config_changed) {
1380 		mutex_enter(&spa_namespace_lock);
1381 		spa_write_cachefile(spa, B_FALSE, B_TRUE);
1382 		mutex_exit(&spa_namespace_lock);
1383 	}
1384 
1385 	return (error);
1386 }
1387 
1388 /*
1389  * ==========================================================================
1390  * Miscellaneous functions
1391  * ==========================================================================
1392  */
1393 
1394 void
1395 spa_activate_mos_feature(spa_t *spa, const char *feature, dmu_tx_t *tx)
1396 {
1397 	if (!nvlist_exists(spa->spa_label_features, feature)) {
1398 		fnvlist_add_boolean(spa->spa_label_features, feature);
1399 		/*
1400 		 * When we are creating the pool (tx_txg==TXG_INITIAL), we can't
1401 		 * dirty the vdev config because lock SCL_CONFIG is not held.
1402 		 * Thankfully, in this case we don't need to dirty the config
1403 		 * because it will be written out anyway when we finish
1404 		 * creating the pool.
1405 		 */
1406 		if (tx->tx_txg != TXG_INITIAL)
1407 			vdev_config_dirty(spa->spa_root_vdev);
1408 	}
1409 }
1410 
1411 void
1412 spa_deactivate_mos_feature(spa_t *spa, const char *feature)
1413 {
1414 	if (nvlist_remove_all(spa->spa_label_features, feature) == 0)
1415 		vdev_config_dirty(spa->spa_root_vdev);
1416 }
1417 
1418 /*
1419  * Return the spa_t associated with given pool_guid, if it exists.  If
1420  * device_guid is non-zero, determine whether the pool exists *and* contains
1421  * a device with the specified device_guid.
1422  */
1423 spa_t *
1424 spa_by_guid(uint64_t pool_guid, uint64_t device_guid)
1425 {
1426 	spa_t *spa;
1427 	avl_tree_t *t = &spa_namespace_avl;
1428 
1429 	ASSERT(MUTEX_HELD(&spa_namespace_lock));
1430 
1431 	for (spa = avl_first(t); spa != NULL; spa = AVL_NEXT(t, spa)) {
1432 		if (spa->spa_state == POOL_STATE_UNINITIALIZED)
1433 			continue;
1434 		if (spa->spa_root_vdev == NULL)
1435 			continue;
1436 		if (spa_guid(spa) == pool_guid) {
1437 			if (device_guid == 0)
1438 				break;
1439 
1440 			if (vdev_lookup_by_guid(spa->spa_root_vdev,
1441 			    device_guid) != NULL)
1442 				break;
1443 
1444 			/*
1445 			 * Check any devices we may be in the process of adding.
1446 			 */
1447 			if (spa->spa_pending_vdev) {
1448 				if (vdev_lookup_by_guid(spa->spa_pending_vdev,
1449 				    device_guid) != NULL)
1450 					break;
1451 			}
1452 		}
1453 	}
1454 
1455 	return (spa);
1456 }
1457 
1458 /*
1459  * Determine whether a pool with the given pool_guid exists.
1460  */
1461 boolean_t
1462 spa_guid_exists(uint64_t pool_guid, uint64_t device_guid)
1463 {
1464 	return (spa_by_guid(pool_guid, device_guid) != NULL);
1465 }
1466 
1467 char *
1468 spa_strdup(const char *s)
1469 {
1470 	size_t len;
1471 	char *new;
1472 
1473 	len = strlen(s);
1474 	new = kmem_alloc(len + 1, KM_SLEEP);
1475 	bcopy(s, new, len);
1476 	new[len] = '\0';
1477 
1478 	return (new);
1479 }
1480 
1481 void
1482 spa_strfree(char *s)
1483 {
1484 	kmem_free(s, strlen(s) + 1);
1485 }
1486 
1487 uint64_t
1488 spa_get_random(uint64_t range)
1489 {
1490 	uint64_t r;
1491 
1492 	ASSERT(range != 0);
1493 
1494 	if (range == 1)
1495 		return (0);
1496 
1497 	(void) random_get_pseudo_bytes((void *)&r, sizeof (uint64_t));
1498 
1499 	return (r % range);
1500 }
1501 
1502 uint64_t
1503 spa_generate_guid(spa_t *spa)
1504 {
1505 	uint64_t guid = spa_get_random(-1ULL);
1506 
1507 	if (spa != NULL) {
1508 		while (guid == 0 || spa_guid_exists(spa_guid(spa), guid))
1509 			guid = spa_get_random(-1ULL);
1510 	} else {
1511 		while (guid == 0 || spa_guid_exists(guid, 0))
1512 			guid = spa_get_random(-1ULL);
1513 	}
1514 
1515 	return (guid);
1516 }
1517 
1518 void
1519 snprintf_blkptr(char *buf, size_t buflen, const blkptr_t *bp)
1520 {
1521 	char type[256];
1522 	char *checksum = NULL;
1523 	char *compress = NULL;
1524 
1525 	if (bp != NULL) {
1526 		if (BP_GET_TYPE(bp) & DMU_OT_NEWTYPE) {
1527 			dmu_object_byteswap_t bswap =
1528 			    DMU_OT_BYTESWAP(BP_GET_TYPE(bp));
1529 			(void) snprintf(type, sizeof (type), "bswap %s %s",
1530 			    DMU_OT_IS_METADATA(BP_GET_TYPE(bp)) ?
1531 			    "metadata" : "data",
1532 			    dmu_ot_byteswap[bswap].ob_name);
1533 		} else {
1534 			(void) strlcpy(type, dmu_ot[BP_GET_TYPE(bp)].ot_name,
1535 			    sizeof (type));
1536 		}
1537 		if (!BP_IS_EMBEDDED(bp)) {
1538 			checksum =
1539 			    zio_checksum_table[BP_GET_CHECKSUM(bp)].ci_name;
1540 		}
1541 		compress = zio_compress_table[BP_GET_COMPRESS(bp)].ci_name;
1542 	}
1543 
1544 	SNPRINTF_BLKPTR(snprintf, ' ', buf, buflen, bp, type, checksum,
1545 	    compress);
1546 }
1547 
1548 void
1549 spa_freeze(spa_t *spa)
1550 {
1551 	uint64_t freeze_txg = 0;
1552 
1553 	spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
1554 	if (spa->spa_freeze_txg == UINT64_MAX) {
1555 		freeze_txg = spa_last_synced_txg(spa) + TXG_SIZE;
1556 		spa->spa_freeze_txg = freeze_txg;
1557 	}
1558 	spa_config_exit(spa, SCL_ALL, FTAG);
1559 	if (freeze_txg != 0)
1560 		txg_wait_synced(spa_get_dsl(spa), freeze_txg);
1561 }
1562 
1563 void
1564 zfs_panic_recover(const char *fmt, ...)
1565 {
1566 	va_list adx;
1567 
1568 	va_start(adx, fmt);
1569 	vcmn_err(zfs_recover ? CE_WARN : CE_PANIC, fmt, adx);
1570 	va_end(adx);
1571 }
1572 
1573 /*
1574  * This is a stripped-down version of strtoull, suitable only for converting
1575  * lowercase hexadecimal numbers that don't overflow.
1576  */
1577 uint64_t
1578 zfs_strtonum(const char *str, char **nptr)
1579 {
1580 	uint64_t val = 0;
1581 	char c;
1582 	int digit;
1583 
1584 	while ((c = *str) != '\0') {
1585 		if (c >= '0' && c <= '9')
1586 			digit = c - '0';
1587 		else if (c >= 'a' && c <= 'f')
1588 			digit = 10 + c - 'a';
1589 		else
1590 			break;
1591 
1592 		val *= 16;
1593 		val += digit;
1594 
1595 		str++;
1596 	}
1597 
1598 	if (nptr)
1599 		*nptr = (char *)str;
1600 
1601 	return (val);
1602 }
1603 
1604 void
1605 spa_activate_allocation_classes(spa_t *spa, dmu_tx_t *tx)
1606 {
1607 	/*
1608 	 * We bump the feature refcount for each special vdev added to the pool
1609 	 */
1610 	ASSERT(spa_feature_is_enabled(spa, SPA_FEATURE_ALLOCATION_CLASSES));
1611 	spa_feature_incr(spa, SPA_FEATURE_ALLOCATION_CLASSES, tx);
1612 }
1613 
1614 /*
1615  * ==========================================================================
1616  * Accessor functions
1617  * ==========================================================================
1618  */
1619 
1620 boolean_t
1621 spa_shutting_down(spa_t *spa)
1622 {
1623 	return (spa->spa_async_suspended);
1624 }
1625 
1626 dsl_pool_t *
1627 spa_get_dsl(spa_t *spa)
1628 {
1629 	return (spa->spa_dsl_pool);
1630 }
1631 
1632 boolean_t
1633 spa_is_initializing(spa_t *spa)
1634 {
1635 	return (spa->spa_is_initializing);
1636 }
1637 
1638 boolean_t
1639 spa_indirect_vdevs_loaded(spa_t *spa)
1640 {
1641 	return (spa->spa_indirect_vdevs_loaded);
1642 }
1643 
1644 blkptr_t *
1645 spa_get_rootblkptr(spa_t *spa)
1646 {
1647 	return (&spa->spa_ubsync.ub_rootbp);
1648 }
1649 
1650 void
1651 spa_set_rootblkptr(spa_t *spa, const blkptr_t *bp)
1652 {
1653 	spa->spa_uberblock.ub_rootbp = *bp;
1654 }
1655 
1656 void
1657 spa_altroot(spa_t *spa, char *buf, size_t buflen)
1658 {
1659 	if (spa->spa_root == NULL)
1660 		buf[0] = '\0';
1661 	else
1662 		(void) strncpy(buf, spa->spa_root, buflen);
1663 }
1664 
1665 int
1666 spa_sync_pass(spa_t *spa)
1667 {
1668 	return (spa->spa_sync_pass);
1669 }
1670 
1671 char *
1672 spa_name(spa_t *spa)
1673 {
1674 	return (spa->spa_name);
1675 }
1676 
1677 uint64_t
1678 spa_guid(spa_t *spa)
1679 {
1680 	dsl_pool_t *dp = spa_get_dsl(spa);
1681 	uint64_t guid;
1682 
1683 	/*
1684 	 * If we fail to parse the config during spa_load(), we can go through
1685 	 * the error path (which posts an ereport) and end up here with no root
1686 	 * vdev.  We stash the original pool guid in 'spa_config_guid' to handle
1687 	 * this case.
1688 	 */
1689 	if (spa->spa_root_vdev == NULL)
1690 		return (spa->spa_config_guid);
1691 
1692 	guid = spa->spa_last_synced_guid != 0 ?
1693 	    spa->spa_last_synced_guid : spa->spa_root_vdev->vdev_guid;
1694 
1695 	/*
1696 	 * Return the most recently synced out guid unless we're
1697 	 * in syncing context.
1698 	 */
1699 	if (dp && dsl_pool_sync_context(dp))
1700 		return (spa->spa_root_vdev->vdev_guid);
1701 	else
1702 		return (guid);
1703 }
1704 
1705 uint64_t
1706 spa_load_guid(spa_t *spa)
1707 {
1708 	/*
1709 	 * This is a GUID that exists solely as a reference for the
1710 	 * purposes of the arc.  It is generated at load time, and
1711 	 * is never written to persistent storage.
1712 	 */
1713 	return (spa->spa_load_guid);
1714 }
1715 
1716 uint64_t
1717 spa_last_synced_txg(spa_t *spa)
1718 {
1719 	return (spa->spa_ubsync.ub_txg);
1720 }
1721 
1722 uint64_t
1723 spa_first_txg(spa_t *spa)
1724 {
1725 	return (spa->spa_first_txg);
1726 }
1727 
1728 uint64_t
1729 spa_syncing_txg(spa_t *spa)
1730 {
1731 	return (spa->spa_syncing_txg);
1732 }
1733 
1734 /*
1735  * Return the last txg where data can be dirtied. The final txgs
1736  * will be used to just clear out any deferred frees that remain.
1737  */
1738 uint64_t
1739 spa_final_dirty_txg(spa_t *spa)
1740 {
1741 	return (spa->spa_final_txg - TXG_DEFER_SIZE);
1742 }
1743 
1744 pool_state_t
1745 spa_state(spa_t *spa)
1746 {
1747 	return (spa->spa_state);
1748 }
1749 
1750 spa_load_state_t
1751 spa_load_state(spa_t *spa)
1752 {
1753 	return (spa->spa_load_state);
1754 }
1755 
1756 uint64_t
1757 spa_freeze_txg(spa_t *spa)
1758 {
1759 	return (spa->spa_freeze_txg);
1760 }
1761 
1762 /*
1763  * Return the inflated asize for a logical write in bytes. This is used by the
1764  * DMU to calculate the space a logical write will require on disk.
1765  * If lsize is smaller than the largest physical block size allocatable on this
1766  * pool we use its value instead, since the write will end up using the whole
1767  * block anyway.
1768  */
1769 uint64_t
1770 spa_get_worst_case_asize(spa_t *spa, uint64_t lsize)
1771 {
1772 	if (lsize == 0)
1773 		return (0);	/* No inflation needed */
1774 	return (MAX(lsize, 1 << spa->spa_max_ashift) * spa_asize_inflation);
1775 }
1776 
1777 /*
1778  * Return the amount of slop space in bytes.  It is 1/32 of the pool (3.2%),
1779  * or at least 128MB, unless that would cause it to be more than half the
1780  * pool size.
1781  *
1782  * See the comment above spa_slop_shift for details.
1783  */
1784 uint64_t
1785 spa_get_slop_space(spa_t *spa)
1786 {
1787 	uint64_t space = spa_get_dspace(spa);
1788 	return (MAX(space >> spa_slop_shift, MIN(space >> 1, spa_min_slop)));
1789 }
1790 
1791 uint64_t
1792 spa_get_dspace(spa_t *spa)
1793 {
1794 	return (spa->spa_dspace);
1795 }
1796 
1797 uint64_t
1798 spa_get_checkpoint_space(spa_t *spa)
1799 {
1800 	return (spa->spa_checkpoint_info.sci_dspace);
1801 }
1802 
1803 void
1804 spa_update_dspace(spa_t *spa)
1805 {
1806 	spa->spa_dspace = metaslab_class_get_dspace(spa_normal_class(spa)) +
1807 	    ddt_get_dedup_dspace(spa);
1808 	if (spa->spa_vdev_removal != NULL) {
1809 		/*
1810 		 * We can't allocate from the removing device, so
1811 		 * subtract its size.  This prevents the DMU/DSL from
1812 		 * filling up the (now smaller) pool while we are in the
1813 		 * middle of removing the device.
1814 		 *
1815 		 * Note that the DMU/DSL doesn't actually know or care
1816 		 * how much space is allocated (it does its own tracking
1817 		 * of how much space has been logically used).  So it
1818 		 * doesn't matter that the data we are moving may be
1819 		 * allocated twice (on the old device and the new
1820 		 * device).
1821 		 */
1822 		spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER);
1823 		vdev_t *vd =
1824 		    vdev_lookup_top(spa, spa->spa_vdev_removal->svr_vdev_id);
1825 		spa->spa_dspace -= spa_deflate(spa) ?
1826 		    vd->vdev_stat.vs_dspace : vd->vdev_stat.vs_space;
1827 		spa_config_exit(spa, SCL_VDEV, FTAG);
1828 	}
1829 }
1830 
1831 /*
1832  * Return the failure mode that has been set to this pool. The default
1833  * behavior will be to block all I/Os when a complete failure occurs.
1834  */
1835 uint64_t
1836 spa_get_failmode(spa_t *spa)
1837 {
1838 	return (spa->spa_failmode);
1839 }
1840 
1841 boolean_t
1842 spa_suspended(spa_t *spa)
1843 {
1844 	return (spa->spa_suspended != ZIO_SUSPEND_NONE);
1845 }
1846 
1847 uint64_t
1848 spa_version(spa_t *spa)
1849 {
1850 	return (spa->spa_ubsync.ub_version);
1851 }
1852 
1853 boolean_t
1854 spa_deflate(spa_t *spa)
1855 {
1856 	return (spa->spa_deflate);
1857 }
1858 
1859 metaslab_class_t *
1860 spa_normal_class(spa_t *spa)
1861 {
1862 	return (spa->spa_normal_class);
1863 }
1864 
1865 metaslab_class_t *
1866 spa_log_class(spa_t *spa)
1867 {
1868 	return (spa->spa_log_class);
1869 }
1870 
1871 metaslab_class_t *
1872 spa_special_class(spa_t *spa)
1873 {
1874 	return (spa->spa_special_class);
1875 }
1876 
1877 metaslab_class_t *
1878 spa_dedup_class(spa_t *spa)
1879 {
1880 	return (spa->spa_dedup_class);
1881 }
1882 
1883 /*
1884  * Locate an appropriate allocation class
1885  */
1886 metaslab_class_t *
1887 spa_preferred_class(spa_t *spa, uint64_t size, dmu_object_type_t objtype,
1888     uint_t level, uint_t special_smallblk)
1889 {
1890 	if (DMU_OT_IS_ZIL(objtype)) {
1891 		if (spa->spa_log_class->mc_groups != 0)
1892 			return (spa_log_class(spa));
1893 		else
1894 			return (spa_normal_class(spa));
1895 	}
1896 
1897 	boolean_t has_special_class = spa->spa_special_class->mc_groups != 0;
1898 
1899 	if (DMU_OT_IS_DDT(objtype)) {
1900 		if (spa->spa_dedup_class->mc_groups != 0)
1901 			return (spa_dedup_class(spa));
1902 		else if (has_special_class && zfs_ddt_data_is_special)
1903 			return (spa_special_class(spa));
1904 		else
1905 			return (spa_normal_class(spa));
1906 	}
1907 
1908 	/* Indirect blocks for user data can land in special if allowed */
1909 	if (level > 0 && (DMU_OT_IS_FILE(objtype) || objtype == DMU_OT_ZVOL)) {
1910 		if (has_special_class && zfs_user_indirect_is_special)
1911 			return (spa_special_class(spa));
1912 		else
1913 			return (spa_normal_class(spa));
1914 	}
1915 
1916 	if (DMU_OT_IS_METADATA(objtype) || level > 0) {
1917 		if (has_special_class)
1918 			return (spa_special_class(spa));
1919 		else
1920 			return (spa_normal_class(spa));
1921 	}
1922 
1923 	/*
1924 	 * Allow small file blocks in special class in some cases (like
1925 	 * for the dRAID vdev feature). But always leave a reserve of
1926 	 * zfs_special_class_metadata_reserve_pct exclusively for metadata.
1927 	 */
1928 	if (DMU_OT_IS_FILE(objtype) &&
1929 	    has_special_class && size <= special_smallblk) {
1930 		metaslab_class_t *special = spa_special_class(spa);
1931 		uint64_t alloc = metaslab_class_get_alloc(special);
1932 		uint64_t space = metaslab_class_get_space(special);
1933 		uint64_t limit =
1934 		    (space * (100 - zfs_special_class_metadata_reserve_pct))
1935 		    / 100;
1936 
1937 		if (alloc < limit)
1938 			return (special);
1939 	}
1940 
1941 	return (spa_normal_class(spa));
1942 }
1943 
1944 void
1945 spa_evicting_os_register(spa_t *spa, objset_t *os)
1946 {
1947 	mutex_enter(&spa->spa_evicting_os_lock);
1948 	list_insert_head(&spa->spa_evicting_os_list, os);
1949 	mutex_exit(&spa->spa_evicting_os_lock);
1950 }
1951 
1952 void
1953 spa_evicting_os_deregister(spa_t *spa, objset_t *os)
1954 {
1955 	mutex_enter(&spa->spa_evicting_os_lock);
1956 	list_remove(&spa->spa_evicting_os_list, os);
1957 	cv_broadcast(&spa->spa_evicting_os_cv);
1958 	mutex_exit(&spa->spa_evicting_os_lock);
1959 }
1960 
1961 void
1962 spa_evicting_os_wait(spa_t *spa)
1963 {
1964 	mutex_enter(&spa->spa_evicting_os_lock);
1965 	while (!list_is_empty(&spa->spa_evicting_os_list))
1966 		cv_wait(&spa->spa_evicting_os_cv, &spa->spa_evicting_os_lock);
1967 	mutex_exit(&spa->spa_evicting_os_lock);
1968 
1969 	dmu_buf_user_evict_wait();
1970 }
1971 
1972 int
1973 spa_max_replication(spa_t *spa)
1974 {
1975 	/*
1976 	 * As of SPA_VERSION == SPA_VERSION_DITTO_BLOCKS, we are able to
1977 	 * handle BPs with more than one DVA allocated.  Set our max
1978 	 * replication level accordingly.
1979 	 */
1980 	if (spa_version(spa) < SPA_VERSION_DITTO_BLOCKS)
1981 		return (1);
1982 	return (MIN(SPA_DVAS_PER_BP, spa_max_replication_override));
1983 }
1984 
1985 int
1986 spa_prev_software_version(spa_t *spa)
1987 {
1988 	return (spa->spa_prev_software_version);
1989 }
1990 
1991 uint64_t
1992 spa_deadman_synctime(spa_t *spa)
1993 {
1994 	return (spa->spa_deadman_synctime);
1995 }
1996 
1997 spa_autotrim_t
1998 spa_get_autotrim(spa_t *spa)
1999 {
2000 	return (spa->spa_autotrim);
2001 }
2002 
2003 uint64_t
2004 spa_deadman_ziotime(spa_t *spa)
2005 {
2006 	return (spa->spa_deadman_ziotime);
2007 }
2008 
2009 uint64_t
2010 spa_get_deadman_failmode(spa_t *spa)
2011 {
2012 	return (spa->spa_deadman_failmode);
2013 }
2014 
2015 void
2016 spa_set_deadman_failmode(spa_t *spa, const char *failmode)
2017 {
2018 	if (strcmp(failmode, "wait") == 0)
2019 		spa->spa_deadman_failmode = ZIO_FAILURE_MODE_WAIT;
2020 	else if (strcmp(failmode, "continue") == 0)
2021 		spa->spa_deadman_failmode = ZIO_FAILURE_MODE_CONTINUE;
2022 	else if (strcmp(failmode, "panic") == 0)
2023 		spa->spa_deadman_failmode = ZIO_FAILURE_MODE_PANIC;
2024 	else
2025 		spa->spa_deadman_failmode = ZIO_FAILURE_MODE_WAIT;
2026 }
2027 
2028 void
2029 spa_set_deadman_ziotime(hrtime_t ns)
2030 {
2031 	spa_t *spa = NULL;
2032 
2033 	if (spa_mode_global != SPA_MODE_UNINIT) {
2034 		mutex_enter(&spa_namespace_lock);
2035 		while ((spa = spa_next(spa)) != NULL)
2036 			spa->spa_deadman_ziotime = ns;
2037 		mutex_exit(&spa_namespace_lock);
2038 	}
2039 }
2040 
2041 void
2042 spa_set_deadman_synctime(hrtime_t ns)
2043 {
2044 	spa_t *spa = NULL;
2045 
2046 	if (spa_mode_global != SPA_MODE_UNINIT) {
2047 		mutex_enter(&spa_namespace_lock);
2048 		while ((spa = spa_next(spa)) != NULL)
2049 			spa->spa_deadman_synctime = ns;
2050 		mutex_exit(&spa_namespace_lock);
2051 	}
2052 }
2053 
2054 uint64_t
2055 dva_get_dsize_sync(spa_t *spa, const dva_t *dva)
2056 {
2057 	uint64_t asize = DVA_GET_ASIZE(dva);
2058 	uint64_t dsize = asize;
2059 
2060 	ASSERT(spa_config_held(spa, SCL_ALL, RW_READER) != 0);
2061 
2062 	if (asize != 0 && spa->spa_deflate) {
2063 		vdev_t *vd = vdev_lookup_top(spa, DVA_GET_VDEV(dva));
2064 		if (vd != NULL)
2065 			dsize = (asize >> SPA_MINBLOCKSHIFT) *
2066 			    vd->vdev_deflate_ratio;
2067 	}
2068 
2069 	return (dsize);
2070 }
2071 
2072 uint64_t
2073 bp_get_dsize_sync(spa_t *spa, const blkptr_t *bp)
2074 {
2075 	uint64_t dsize = 0;
2076 
2077 	for (int d = 0; d < BP_GET_NDVAS(bp); d++)
2078 		dsize += dva_get_dsize_sync(spa, &bp->blk_dva[d]);
2079 
2080 	return (dsize);
2081 }
2082 
2083 uint64_t
2084 bp_get_dsize(spa_t *spa, const blkptr_t *bp)
2085 {
2086 	uint64_t dsize = 0;
2087 
2088 	spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER);
2089 
2090 	for (int d = 0; d < BP_GET_NDVAS(bp); d++)
2091 		dsize += dva_get_dsize_sync(spa, &bp->blk_dva[d]);
2092 
2093 	spa_config_exit(spa, SCL_VDEV, FTAG);
2094 
2095 	return (dsize);
2096 }
2097 
2098 uint64_t
2099 spa_dirty_data(spa_t *spa)
2100 {
2101 	return (spa->spa_dsl_pool->dp_dirty_total);
2102 }
2103 
2104 /*
2105  * ==========================================================================
2106  * SPA Import Progress Routines
2107  * ==========================================================================
2108  */
2109 
2110 typedef struct spa_import_progress {
2111 	uint64_t		pool_guid;	/* unique id for updates */
2112 	char			*pool_name;
2113 	spa_load_state_t	spa_load_state;
2114 	uint64_t		mmp_sec_remaining;	/* MMP activity check */
2115 	uint64_t		spa_load_max_txg;	/* rewind txg */
2116 	procfs_list_node_t	smh_node;
2117 } spa_import_progress_t;
2118 
2119 spa_history_list_t *spa_import_progress_list = NULL;
2120 
2121 static int
2122 spa_import_progress_show_header(struct seq_file *f)
2123 {
2124 	seq_printf(f, "%-20s %-14s %-14s %-12s %s\n", "pool_guid",
2125 	    "load_state", "multihost_secs", "max_txg",
2126 	    "pool_name");
2127 	return (0);
2128 }
2129 
2130 static int
2131 spa_import_progress_show(struct seq_file *f, void *data)
2132 {
2133 	spa_import_progress_t *sip = (spa_import_progress_t *)data;
2134 
2135 	seq_printf(f, "%-20llu %-14llu %-14llu %-12llu %s\n",
2136 	    (u_longlong_t)sip->pool_guid, (u_longlong_t)sip->spa_load_state,
2137 	    (u_longlong_t)sip->mmp_sec_remaining,
2138 	    (u_longlong_t)sip->spa_load_max_txg,
2139 	    (sip->pool_name ? sip->pool_name : "-"));
2140 
2141 	return (0);
2142 }
2143 
2144 /* Remove oldest elements from list until there are no more than 'size' left */
2145 static void
2146 spa_import_progress_truncate(spa_history_list_t *shl, unsigned int size)
2147 {
2148 	spa_import_progress_t *sip;
2149 	while (shl->size > size) {
2150 		sip = list_remove_head(&shl->procfs_list.pl_list);
2151 		if (sip->pool_name)
2152 			spa_strfree(sip->pool_name);
2153 		kmem_free(sip, sizeof (spa_import_progress_t));
2154 		shl->size--;
2155 	}
2156 
2157 	IMPLY(size == 0, list_is_empty(&shl->procfs_list.pl_list));
2158 }
2159 
2160 static void
2161 spa_import_progress_init(void)
2162 {
2163 	spa_import_progress_list = kmem_zalloc(sizeof (spa_history_list_t),
2164 	    KM_SLEEP);
2165 
2166 	spa_import_progress_list->size = 0;
2167 
2168 	spa_import_progress_list->procfs_list.pl_private =
2169 	    spa_import_progress_list;
2170 
2171 	procfs_list_install("zfs",
2172 	    "import_progress",
2173 	    0644,
2174 	    &spa_import_progress_list->procfs_list,
2175 	    spa_import_progress_show,
2176 	    spa_import_progress_show_header,
2177 	    NULL,
2178 	    offsetof(spa_import_progress_t, smh_node));
2179 }
2180 
2181 static void
2182 spa_import_progress_destroy(void)
2183 {
2184 	spa_history_list_t *shl = spa_import_progress_list;
2185 	procfs_list_uninstall(&shl->procfs_list);
2186 	spa_import_progress_truncate(shl, 0);
2187 	procfs_list_destroy(&shl->procfs_list);
2188 	kmem_free(shl, sizeof (spa_history_list_t));
2189 }
2190 
2191 int
2192 spa_import_progress_set_state(uint64_t pool_guid,
2193     spa_load_state_t load_state)
2194 {
2195 	spa_history_list_t *shl = spa_import_progress_list;
2196 	spa_import_progress_t *sip;
2197 	int error = ENOENT;
2198 
2199 	if (shl->size == 0)
2200 		return (0);
2201 
2202 	mutex_enter(&shl->procfs_list.pl_lock);
2203 	for (sip = list_tail(&shl->procfs_list.pl_list); sip != NULL;
2204 	    sip = list_prev(&shl->procfs_list.pl_list, sip)) {
2205 		if (sip->pool_guid == pool_guid) {
2206 			sip->spa_load_state = load_state;
2207 			error = 0;
2208 			break;
2209 		}
2210 	}
2211 	mutex_exit(&shl->procfs_list.pl_lock);
2212 
2213 	return (error);
2214 }
2215 
2216 int
2217 spa_import_progress_set_max_txg(uint64_t pool_guid, uint64_t load_max_txg)
2218 {
2219 	spa_history_list_t *shl = spa_import_progress_list;
2220 	spa_import_progress_t *sip;
2221 	int error = ENOENT;
2222 
2223 	if (shl->size == 0)
2224 		return (0);
2225 
2226 	mutex_enter(&shl->procfs_list.pl_lock);
2227 	for (sip = list_tail(&shl->procfs_list.pl_list); sip != NULL;
2228 	    sip = list_prev(&shl->procfs_list.pl_list, sip)) {
2229 		if (sip->pool_guid == pool_guid) {
2230 			sip->spa_load_max_txg = load_max_txg;
2231 			error = 0;
2232 			break;
2233 		}
2234 	}
2235 	mutex_exit(&shl->procfs_list.pl_lock);
2236 
2237 	return (error);
2238 }
2239 
2240 int
2241 spa_import_progress_set_mmp_check(uint64_t pool_guid,
2242     uint64_t mmp_sec_remaining)
2243 {
2244 	spa_history_list_t *shl = spa_import_progress_list;
2245 	spa_import_progress_t *sip;
2246 	int error = ENOENT;
2247 
2248 	if (shl->size == 0)
2249 		return (0);
2250 
2251 	mutex_enter(&shl->procfs_list.pl_lock);
2252 	for (sip = list_tail(&shl->procfs_list.pl_list); sip != NULL;
2253 	    sip = list_prev(&shl->procfs_list.pl_list, sip)) {
2254 		if (sip->pool_guid == pool_guid) {
2255 			sip->mmp_sec_remaining = mmp_sec_remaining;
2256 			error = 0;
2257 			break;
2258 		}
2259 	}
2260 	mutex_exit(&shl->procfs_list.pl_lock);
2261 
2262 	return (error);
2263 }
2264 
2265 /*
2266  * A new import is in progress, add an entry.
2267  */
2268 void
2269 spa_import_progress_add(spa_t *spa)
2270 {
2271 	spa_history_list_t *shl = spa_import_progress_list;
2272 	spa_import_progress_t *sip;
2273 	char *poolname = NULL;
2274 
2275 	sip = kmem_zalloc(sizeof (spa_import_progress_t), KM_SLEEP);
2276 	sip->pool_guid = spa_guid(spa);
2277 
2278 	(void) nvlist_lookup_string(spa->spa_config, ZPOOL_CONFIG_POOL_NAME,
2279 	    &poolname);
2280 	if (poolname == NULL)
2281 		poolname = spa_name(spa);
2282 	sip->pool_name = spa_strdup(poolname);
2283 	sip->spa_load_state = spa_load_state(spa);
2284 
2285 	mutex_enter(&shl->procfs_list.pl_lock);
2286 	procfs_list_add(&shl->procfs_list, sip);
2287 	shl->size++;
2288 	mutex_exit(&shl->procfs_list.pl_lock);
2289 }
2290 
2291 void
2292 spa_import_progress_remove(uint64_t pool_guid)
2293 {
2294 	spa_history_list_t *shl = spa_import_progress_list;
2295 	spa_import_progress_t *sip;
2296 
2297 	mutex_enter(&shl->procfs_list.pl_lock);
2298 	for (sip = list_tail(&shl->procfs_list.pl_list); sip != NULL;
2299 	    sip = list_prev(&shl->procfs_list.pl_list, sip)) {
2300 		if (sip->pool_guid == pool_guid) {
2301 			if (sip->pool_name)
2302 				spa_strfree(sip->pool_name);
2303 			list_remove(&shl->procfs_list.pl_list, sip);
2304 			shl->size--;
2305 			kmem_free(sip, sizeof (spa_import_progress_t));
2306 			break;
2307 		}
2308 	}
2309 	mutex_exit(&shl->procfs_list.pl_lock);
2310 }
2311 
2312 /*
2313  * ==========================================================================
2314  * Initialization and Termination
2315  * ==========================================================================
2316  */
2317 
2318 static int
2319 spa_name_compare(const void *a1, const void *a2)
2320 {
2321 	const spa_t *s1 = a1;
2322 	const spa_t *s2 = a2;
2323 	int s;
2324 
2325 	s = strcmp(s1->spa_name, s2->spa_name);
2326 
2327 	return (TREE_ISIGN(s));
2328 }
2329 
2330 void
2331 spa_boot_init(void)
2332 {
2333 	spa_config_load();
2334 }
2335 
2336 void
2337 spa_init(spa_mode_t mode)
2338 {
2339 	mutex_init(&spa_namespace_lock, NULL, MUTEX_DEFAULT, NULL);
2340 	mutex_init(&spa_spare_lock, NULL, MUTEX_DEFAULT, NULL);
2341 	mutex_init(&spa_l2cache_lock, NULL, MUTEX_DEFAULT, NULL);
2342 	cv_init(&spa_namespace_cv, NULL, CV_DEFAULT, NULL);
2343 
2344 	avl_create(&spa_namespace_avl, spa_name_compare, sizeof (spa_t),
2345 	    offsetof(spa_t, spa_avl));
2346 
2347 	avl_create(&spa_spare_avl, spa_spare_compare, sizeof (spa_aux_t),
2348 	    offsetof(spa_aux_t, aux_avl));
2349 
2350 	avl_create(&spa_l2cache_avl, spa_l2cache_compare, sizeof (spa_aux_t),
2351 	    offsetof(spa_aux_t, aux_avl));
2352 
2353 	spa_mode_global = mode;
2354 
2355 #ifndef _KERNEL
2356 	if (spa_mode_global != SPA_MODE_READ && dprintf_find_string("watch")) {
2357 		struct sigaction sa;
2358 
2359 		sa.sa_flags = SA_SIGINFO;
2360 		sigemptyset(&sa.sa_mask);
2361 		sa.sa_sigaction = arc_buf_sigsegv;
2362 
2363 		if (sigaction(SIGSEGV, &sa, NULL) == -1) {
2364 			perror("could not enable watchpoints: "
2365 			    "sigaction(SIGSEGV, ...) = ");
2366 		} else {
2367 			arc_watch = B_TRUE;
2368 		}
2369 	}
2370 #endif
2371 
2372 	fm_init();
2373 	zfs_refcount_init();
2374 	unique_init();
2375 	zfs_btree_init();
2376 	metaslab_stat_init();
2377 	ddt_init();
2378 	zio_init();
2379 	dmu_init();
2380 	zil_init();
2381 	vdev_cache_stat_init();
2382 	vdev_mirror_stat_init();
2383 	vdev_raidz_math_init();
2384 	vdev_file_init();
2385 	zfs_prop_init();
2386 	zpool_prop_init();
2387 	zpool_feature_init();
2388 	spa_config_load();
2389 	l2arc_start();
2390 	scan_init();
2391 	qat_init();
2392 	spa_import_progress_init();
2393 }
2394 
2395 void
2396 spa_fini(void)
2397 {
2398 	l2arc_stop();
2399 
2400 	spa_evict_all();
2401 
2402 	vdev_file_fini();
2403 	vdev_cache_stat_fini();
2404 	vdev_mirror_stat_fini();
2405 	vdev_raidz_math_fini();
2406 	zil_fini();
2407 	dmu_fini();
2408 	zio_fini();
2409 	ddt_fini();
2410 	metaslab_stat_fini();
2411 	zfs_btree_fini();
2412 	unique_fini();
2413 	zfs_refcount_fini();
2414 	fm_fini();
2415 	scan_fini();
2416 	qat_fini();
2417 	spa_import_progress_destroy();
2418 
2419 	avl_destroy(&spa_namespace_avl);
2420 	avl_destroy(&spa_spare_avl);
2421 	avl_destroy(&spa_l2cache_avl);
2422 
2423 	cv_destroy(&spa_namespace_cv);
2424 	mutex_destroy(&spa_namespace_lock);
2425 	mutex_destroy(&spa_spare_lock);
2426 	mutex_destroy(&spa_l2cache_lock);
2427 }
2428 
2429 /*
2430  * Return whether this pool has slogs. No locking needed.
2431  * It's not a problem if the wrong answer is returned as it's only for
2432  * performance and not correctness
2433  */
2434 boolean_t
2435 spa_has_slogs(spa_t *spa)
2436 {
2437 	return (spa->spa_log_class->mc_rotor != NULL);
2438 }
2439 
2440 spa_log_state_t
2441 spa_get_log_state(spa_t *spa)
2442 {
2443 	return (spa->spa_log_state);
2444 }
2445 
2446 void
2447 spa_set_log_state(spa_t *spa, spa_log_state_t state)
2448 {
2449 	spa->spa_log_state = state;
2450 }
2451 
2452 boolean_t
2453 spa_is_root(spa_t *spa)
2454 {
2455 	return (spa->spa_is_root);
2456 }
2457 
2458 boolean_t
2459 spa_writeable(spa_t *spa)
2460 {
2461 	return (!!(spa->spa_mode & SPA_MODE_WRITE) && spa->spa_trust_config);
2462 }
2463 
2464 /*
2465  * Returns true if there is a pending sync task in any of the current
2466  * syncing txg, the current quiescing txg, or the current open txg.
2467  */
2468 boolean_t
2469 spa_has_pending_synctask(spa_t *spa)
2470 {
2471 	return (!txg_all_lists_empty(&spa->spa_dsl_pool->dp_sync_tasks) ||
2472 	    !txg_all_lists_empty(&spa->spa_dsl_pool->dp_early_sync_tasks));
2473 }
2474 
2475 spa_mode_t
2476 spa_mode(spa_t *spa)
2477 {
2478 	return (spa->spa_mode);
2479 }
2480 
2481 uint64_t
2482 spa_bootfs(spa_t *spa)
2483 {
2484 	return (spa->spa_bootfs);
2485 }
2486 
2487 uint64_t
2488 spa_delegation(spa_t *spa)
2489 {
2490 	return (spa->spa_delegation);
2491 }
2492 
2493 objset_t *
2494 spa_meta_objset(spa_t *spa)
2495 {
2496 	return (spa->spa_meta_objset);
2497 }
2498 
2499 enum zio_checksum
2500 spa_dedup_checksum(spa_t *spa)
2501 {
2502 	return (spa->spa_dedup_checksum);
2503 }
2504 
2505 /*
2506  * Reset pool scan stat per scan pass (or reboot).
2507  */
2508 void
2509 spa_scan_stat_init(spa_t *spa)
2510 {
2511 	/* data not stored on disk */
2512 	spa->spa_scan_pass_start = gethrestime_sec();
2513 	if (dsl_scan_is_paused_scrub(spa->spa_dsl_pool->dp_scan))
2514 		spa->spa_scan_pass_scrub_pause = spa->spa_scan_pass_start;
2515 	else
2516 		spa->spa_scan_pass_scrub_pause = 0;
2517 	spa->spa_scan_pass_scrub_spent_paused = 0;
2518 	spa->spa_scan_pass_exam = 0;
2519 	spa->spa_scan_pass_issued = 0;
2520 	vdev_scan_stat_init(spa->spa_root_vdev);
2521 }
2522 
2523 /*
2524  * Get scan stats for zpool status reports
2525  */
2526 int
2527 spa_scan_get_stats(spa_t *spa, pool_scan_stat_t *ps)
2528 {
2529 	dsl_scan_t *scn = spa->spa_dsl_pool ? spa->spa_dsl_pool->dp_scan : NULL;
2530 
2531 	if (scn == NULL || scn->scn_phys.scn_func == POOL_SCAN_NONE)
2532 		return (SET_ERROR(ENOENT));
2533 	bzero(ps, sizeof (pool_scan_stat_t));
2534 
2535 	/* data stored on disk */
2536 	ps->pss_func = scn->scn_phys.scn_func;
2537 	ps->pss_state = scn->scn_phys.scn_state;
2538 	ps->pss_start_time = scn->scn_phys.scn_start_time;
2539 	ps->pss_end_time = scn->scn_phys.scn_end_time;
2540 	ps->pss_to_examine = scn->scn_phys.scn_to_examine;
2541 	ps->pss_examined = scn->scn_phys.scn_examined;
2542 	ps->pss_to_process = scn->scn_phys.scn_to_process;
2543 	ps->pss_processed = scn->scn_phys.scn_processed;
2544 	ps->pss_errors = scn->scn_phys.scn_errors;
2545 
2546 	/* data not stored on disk */
2547 	ps->pss_pass_exam = spa->spa_scan_pass_exam;
2548 	ps->pss_pass_start = spa->spa_scan_pass_start;
2549 	ps->pss_pass_scrub_pause = spa->spa_scan_pass_scrub_pause;
2550 	ps->pss_pass_scrub_spent_paused = spa->spa_scan_pass_scrub_spent_paused;
2551 	ps->pss_pass_issued = spa->spa_scan_pass_issued;
2552 	ps->pss_issued =
2553 	    scn->scn_issued_before_pass + spa->spa_scan_pass_issued;
2554 
2555 	return (0);
2556 }
2557 
2558 int
2559 spa_maxblocksize(spa_t *spa)
2560 {
2561 	if (spa_feature_is_enabled(spa, SPA_FEATURE_LARGE_BLOCKS))
2562 		return (SPA_MAXBLOCKSIZE);
2563 	else
2564 		return (SPA_OLD_MAXBLOCKSIZE);
2565 }
2566 
2567 
2568 /*
2569  * Returns the txg that the last device removal completed. No indirect mappings
2570  * have been added since this txg.
2571  */
2572 uint64_t
2573 spa_get_last_removal_txg(spa_t *spa)
2574 {
2575 	uint64_t vdevid;
2576 	uint64_t ret = -1ULL;
2577 
2578 	spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER);
2579 	/*
2580 	 * sr_prev_indirect_vdev is only modified while holding all the
2581 	 * config locks, so it is sufficient to hold SCL_VDEV as reader when
2582 	 * examining it.
2583 	 */
2584 	vdevid = spa->spa_removing_phys.sr_prev_indirect_vdev;
2585 
2586 	while (vdevid != -1ULL) {
2587 		vdev_t *vd = vdev_lookup_top(spa, vdevid);
2588 		vdev_indirect_births_t *vib = vd->vdev_indirect_births;
2589 
2590 		ASSERT3P(vd->vdev_ops, ==, &vdev_indirect_ops);
2591 
2592 		/*
2593 		 * If the removal did not remap any data, we don't care.
2594 		 */
2595 		if (vdev_indirect_births_count(vib) != 0) {
2596 			ret = vdev_indirect_births_last_entry_txg(vib);
2597 			break;
2598 		}
2599 
2600 		vdevid = vd->vdev_indirect_config.vic_prev_indirect_vdev;
2601 	}
2602 	spa_config_exit(spa, SCL_VDEV, FTAG);
2603 
2604 	IMPLY(ret != -1ULL,
2605 	    spa_feature_is_active(spa, SPA_FEATURE_DEVICE_REMOVAL));
2606 
2607 	return (ret);
2608 }
2609 
2610 int
2611 spa_maxdnodesize(spa_t *spa)
2612 {
2613 	if (spa_feature_is_enabled(spa, SPA_FEATURE_LARGE_DNODE))
2614 		return (DNODE_MAX_SIZE);
2615 	else
2616 		return (DNODE_MIN_SIZE);
2617 }
2618 
2619 boolean_t
2620 spa_multihost(spa_t *spa)
2621 {
2622 	return (spa->spa_multihost ? B_TRUE : B_FALSE);
2623 }
2624 
2625 uint32_t
2626 spa_get_hostid(spa_t *spa)
2627 {
2628 	return (spa->spa_hostid);
2629 }
2630 
2631 boolean_t
2632 spa_trust_config(spa_t *spa)
2633 {
2634 	return (spa->spa_trust_config);
2635 }
2636 
2637 uint64_t
2638 spa_missing_tvds_allowed(spa_t *spa)
2639 {
2640 	return (spa->spa_missing_tvds_allowed);
2641 }
2642 
2643 space_map_t *
2644 spa_syncing_log_sm(spa_t *spa)
2645 {
2646 	return (spa->spa_syncing_log_sm);
2647 }
2648 
2649 void
2650 spa_set_missing_tvds(spa_t *spa, uint64_t missing)
2651 {
2652 	spa->spa_missing_tvds = missing;
2653 }
2654 
2655 /*
2656  * Return the pool state string ("ONLINE", "DEGRADED", "SUSPENDED", etc).
2657  */
2658 const char *
2659 spa_state_to_name(spa_t *spa)
2660 {
2661 	ASSERT3P(spa, !=, NULL);
2662 
2663 	/*
2664 	 * it is possible for the spa to exist, without root vdev
2665 	 * as the spa transitions during import/export
2666 	 */
2667 	vdev_t *rvd = spa->spa_root_vdev;
2668 	if (rvd == NULL) {
2669 		return ("TRANSITIONING");
2670 	}
2671 	vdev_state_t state = rvd->vdev_state;
2672 	vdev_aux_t aux = rvd->vdev_stat.vs_aux;
2673 
2674 	if (spa_suspended(spa) &&
2675 	    (spa_get_failmode(spa) != ZIO_FAILURE_MODE_CONTINUE))
2676 		return ("SUSPENDED");
2677 
2678 	switch (state) {
2679 	case VDEV_STATE_CLOSED:
2680 	case VDEV_STATE_OFFLINE:
2681 		return ("OFFLINE");
2682 	case VDEV_STATE_REMOVED:
2683 		return ("REMOVED");
2684 	case VDEV_STATE_CANT_OPEN:
2685 		if (aux == VDEV_AUX_CORRUPT_DATA || aux == VDEV_AUX_BAD_LOG)
2686 			return ("FAULTED");
2687 		else if (aux == VDEV_AUX_SPLIT_POOL)
2688 			return ("SPLIT");
2689 		else
2690 			return ("UNAVAIL");
2691 	case VDEV_STATE_FAULTED:
2692 		return ("FAULTED");
2693 	case VDEV_STATE_DEGRADED:
2694 		return ("DEGRADED");
2695 	case VDEV_STATE_HEALTHY:
2696 		return ("ONLINE");
2697 	default:
2698 		break;
2699 	}
2700 
2701 	return ("UNKNOWN");
2702 }
2703 
2704 boolean_t
2705 spa_top_vdevs_spacemap_addressable(spa_t *spa)
2706 {
2707 	vdev_t *rvd = spa->spa_root_vdev;
2708 	for (uint64_t c = 0; c < rvd->vdev_children; c++) {
2709 		if (!vdev_is_spacemap_addressable(rvd->vdev_child[c]))
2710 			return (B_FALSE);
2711 	}
2712 	return (B_TRUE);
2713 }
2714 
2715 boolean_t
2716 spa_has_checkpoint(spa_t *spa)
2717 {
2718 	return (spa->spa_checkpoint_txg != 0);
2719 }
2720 
2721 boolean_t
2722 spa_importing_readonly_checkpoint(spa_t *spa)
2723 {
2724 	return ((spa->spa_import_flags & ZFS_IMPORT_CHECKPOINT) &&
2725 	    spa->spa_mode == SPA_MODE_READ);
2726 }
2727 
2728 uint64_t
2729 spa_min_claim_txg(spa_t *spa)
2730 {
2731 	uint64_t checkpoint_txg = spa->spa_uberblock.ub_checkpoint_txg;
2732 
2733 	if (checkpoint_txg != 0)
2734 		return (checkpoint_txg + 1);
2735 
2736 	return (spa->spa_first_txg);
2737 }
2738 
2739 /*
2740  * If there is a checkpoint, async destroys may consume more space from
2741  * the pool instead of freeing it. In an attempt to save the pool from
2742  * getting suspended when it is about to run out of space, we stop
2743  * processing async destroys.
2744  */
2745 boolean_t
2746 spa_suspend_async_destroy(spa_t *spa)
2747 {
2748 	dsl_pool_t *dp = spa_get_dsl(spa);
2749 
2750 	uint64_t unreserved = dsl_pool_unreserved_space(dp,
2751 	    ZFS_SPACE_CHECK_EXTRA_RESERVED);
2752 	uint64_t used = dsl_dir_phys(dp->dp_root_dir)->dd_used_bytes;
2753 	uint64_t avail = (unreserved > used) ? (unreserved - used) : 0;
2754 
2755 	if (spa_has_checkpoint(spa) && avail == 0)
2756 		return (B_TRUE);
2757 
2758 	return (B_FALSE);
2759 }
2760 
2761 #if defined(_KERNEL)
2762 
2763 int
2764 param_set_deadman_failmode_common(const char *val)
2765 {
2766 	spa_t *spa = NULL;
2767 	char *p;
2768 
2769 	if (val == NULL)
2770 		return (SET_ERROR(EINVAL));
2771 
2772 	if ((p = strchr(val, '\n')) != NULL)
2773 		*p = '\0';
2774 
2775 	if (strcmp(val, "wait") != 0 && strcmp(val, "continue") != 0 &&
2776 	    strcmp(val, "panic"))
2777 		return (SET_ERROR(EINVAL));
2778 
2779 	if (spa_mode_global != SPA_MODE_UNINIT) {
2780 		mutex_enter(&spa_namespace_lock);
2781 		while ((spa = spa_next(spa)) != NULL)
2782 			spa_set_deadman_failmode(spa, val);
2783 		mutex_exit(&spa_namespace_lock);
2784 	}
2785 
2786 	return (0);
2787 }
2788 #endif
2789 
2790 /* Namespace manipulation */
2791 EXPORT_SYMBOL(spa_lookup);
2792 EXPORT_SYMBOL(spa_add);
2793 EXPORT_SYMBOL(spa_remove);
2794 EXPORT_SYMBOL(spa_next);
2795 
2796 /* Refcount functions */
2797 EXPORT_SYMBOL(spa_open_ref);
2798 EXPORT_SYMBOL(spa_close);
2799 EXPORT_SYMBOL(spa_refcount_zero);
2800 
2801 /* Pool configuration lock */
2802 EXPORT_SYMBOL(spa_config_tryenter);
2803 EXPORT_SYMBOL(spa_config_enter);
2804 EXPORT_SYMBOL(spa_config_exit);
2805 EXPORT_SYMBOL(spa_config_held);
2806 
2807 /* Pool vdev add/remove lock */
2808 EXPORT_SYMBOL(spa_vdev_enter);
2809 EXPORT_SYMBOL(spa_vdev_exit);
2810 
2811 /* Pool vdev state change lock */
2812 EXPORT_SYMBOL(spa_vdev_state_enter);
2813 EXPORT_SYMBOL(spa_vdev_state_exit);
2814 
2815 /* Accessor functions */
2816 EXPORT_SYMBOL(spa_shutting_down);
2817 EXPORT_SYMBOL(spa_get_dsl);
2818 EXPORT_SYMBOL(spa_get_rootblkptr);
2819 EXPORT_SYMBOL(spa_set_rootblkptr);
2820 EXPORT_SYMBOL(spa_altroot);
2821 EXPORT_SYMBOL(spa_sync_pass);
2822 EXPORT_SYMBOL(spa_name);
2823 EXPORT_SYMBOL(spa_guid);
2824 EXPORT_SYMBOL(spa_last_synced_txg);
2825 EXPORT_SYMBOL(spa_first_txg);
2826 EXPORT_SYMBOL(spa_syncing_txg);
2827 EXPORT_SYMBOL(spa_version);
2828 EXPORT_SYMBOL(spa_state);
2829 EXPORT_SYMBOL(spa_load_state);
2830 EXPORT_SYMBOL(spa_freeze_txg);
2831 EXPORT_SYMBOL(spa_get_dspace);
2832 EXPORT_SYMBOL(spa_update_dspace);
2833 EXPORT_SYMBOL(spa_deflate);
2834 EXPORT_SYMBOL(spa_normal_class);
2835 EXPORT_SYMBOL(spa_log_class);
2836 EXPORT_SYMBOL(spa_special_class);
2837 EXPORT_SYMBOL(spa_preferred_class);
2838 EXPORT_SYMBOL(spa_max_replication);
2839 EXPORT_SYMBOL(spa_prev_software_version);
2840 EXPORT_SYMBOL(spa_get_failmode);
2841 EXPORT_SYMBOL(spa_suspended);
2842 EXPORT_SYMBOL(spa_bootfs);
2843 EXPORT_SYMBOL(spa_delegation);
2844 EXPORT_SYMBOL(spa_meta_objset);
2845 EXPORT_SYMBOL(spa_maxblocksize);
2846 EXPORT_SYMBOL(spa_maxdnodesize);
2847 
2848 /* Miscellaneous support routines */
2849 EXPORT_SYMBOL(spa_guid_exists);
2850 EXPORT_SYMBOL(spa_strdup);
2851 EXPORT_SYMBOL(spa_strfree);
2852 EXPORT_SYMBOL(spa_get_random);
2853 EXPORT_SYMBOL(spa_generate_guid);
2854 EXPORT_SYMBOL(snprintf_blkptr);
2855 EXPORT_SYMBOL(spa_freeze);
2856 EXPORT_SYMBOL(spa_upgrade);
2857 EXPORT_SYMBOL(spa_evict_all);
2858 EXPORT_SYMBOL(spa_lookup_by_guid);
2859 EXPORT_SYMBOL(spa_has_spare);
2860 EXPORT_SYMBOL(dva_get_dsize_sync);
2861 EXPORT_SYMBOL(bp_get_dsize_sync);
2862 EXPORT_SYMBOL(bp_get_dsize);
2863 EXPORT_SYMBOL(spa_has_slogs);
2864 EXPORT_SYMBOL(spa_is_root);
2865 EXPORT_SYMBOL(spa_writeable);
2866 EXPORT_SYMBOL(spa_mode);
2867 EXPORT_SYMBOL(spa_namespace_lock);
2868 EXPORT_SYMBOL(spa_trust_config);
2869 EXPORT_SYMBOL(spa_missing_tvds_allowed);
2870 EXPORT_SYMBOL(spa_set_missing_tvds);
2871 EXPORT_SYMBOL(spa_state_to_name);
2872 EXPORT_SYMBOL(spa_importing_readonly_checkpoint);
2873 EXPORT_SYMBOL(spa_min_claim_txg);
2874 EXPORT_SYMBOL(spa_suspend_async_destroy);
2875 EXPORT_SYMBOL(spa_has_checkpoint);
2876 EXPORT_SYMBOL(spa_top_vdevs_spacemap_addressable);
2877 
2878 ZFS_MODULE_PARAM(zfs, zfs_, flags, UINT, ZMOD_RW,
2879 	"Set additional debugging flags");
2880 
2881 ZFS_MODULE_PARAM(zfs, zfs_, recover, INT, ZMOD_RW,
2882 	"Set to attempt to recover from fatal errors");
2883 
2884 ZFS_MODULE_PARAM(zfs, zfs_, free_leak_on_eio, INT, ZMOD_RW,
2885 	"Set to ignore IO errors during free and permanently leak the space");
2886 
2887 ZFS_MODULE_PARAM(zfs, zfs_, deadman_checktime_ms, ULONG, ZMOD_RW,
2888 	"Dead I/O check interval in milliseconds");
2889 
2890 ZFS_MODULE_PARAM(zfs, zfs_, deadman_enabled, INT, ZMOD_RW,
2891 	"Enable deadman timer");
2892 
2893 ZFS_MODULE_PARAM(zfs_spa, spa_, asize_inflation, INT, ZMOD_RW,
2894 	"SPA size estimate multiplication factor");
2895 
2896 ZFS_MODULE_PARAM(zfs, zfs_, ddt_data_is_special, INT, ZMOD_RW,
2897 	"Place DDT data into the special class");
2898 
2899 ZFS_MODULE_PARAM(zfs, zfs_, user_indirect_is_special, INT, ZMOD_RW,
2900 	"Place user data indirect blocks into the special class");
2901 
2902 /* BEGIN CSTYLED */
2903 ZFS_MODULE_PARAM_CALL(zfs_deadman, zfs_deadman_, failmode,
2904 	param_set_deadman_failmode, param_get_charp, ZMOD_RW,
2905 	"Failmode for deadman timer");
2906 
2907 ZFS_MODULE_PARAM_CALL(zfs_deadman, zfs_deadman_, synctime_ms,
2908 	param_set_deadman_synctime, param_get_ulong, ZMOD_RW,
2909 	"Pool sync expiration time in milliseconds");
2910 
2911 ZFS_MODULE_PARAM_CALL(zfs_deadman, zfs_deadman_, ziotime_ms,
2912 	param_set_deadman_ziotime, param_get_ulong, ZMOD_RW,
2913 	"IO expiration time in milliseconds");
2914 
2915 ZFS_MODULE_PARAM(zfs, zfs_, special_class_metadata_reserve_pct, INT, ZMOD_RW,
2916 	"Small file blocks in special vdevs depends on this much "
2917 	"free space available");
2918 /* END CSTYLED */
2919 
2920 ZFS_MODULE_PARAM_CALL(zfs_spa, spa_, slop_shift, param_set_slop_shift,
2921 	param_get_int, ZMOD_RW, "Reserved free space in pool");
2922