1 /*- 2 * Copyright (c) 2000 Takanori Watanabe <takawata@jp.freebsd.org> 3 * Copyright (c) 2000 Mitsuru IWASAKI <iwasaki@jp.freebsd.org> 4 * Copyright (c) 2000, 2001 Michael Smith 5 * Copyright (c) 2000 BSDi 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30 #include <sys/cdefs.h> 31 __FBSDID("$FreeBSD$"); 32 33 #include "opt_acpi.h" 34 35 #include <sys/param.h> 36 #include <sys/eventhandler.h> 37 #include <sys/kernel.h> 38 #include <sys/proc.h> 39 #include <sys/fcntl.h> 40 #include <sys/malloc.h> 41 #include <sys/module.h> 42 #include <sys/bus.h> 43 #include <sys/conf.h> 44 #include <sys/ioccom.h> 45 #include <sys/reboot.h> 46 #include <sys/sysctl.h> 47 #include <sys/ctype.h> 48 #include <sys/linker.h> 49 #include <sys/power.h> 50 #include <sys/sbuf.h> 51 #include <sys/sched.h> 52 #include <sys/smp.h> 53 #include <sys/timetc.h> 54 55 #if defined(__i386__) || defined(__amd64__) 56 #include <machine/clock.h> 57 #include <machine/pci_cfgreg.h> 58 #endif 59 #include <machine/resource.h> 60 #include <machine/bus.h> 61 #include <sys/rman.h> 62 #include <isa/isavar.h> 63 #include <isa/pnpvar.h> 64 65 #include <contrib/dev/acpica/include/acpi.h> 66 #include <contrib/dev/acpica/include/accommon.h> 67 #include <contrib/dev/acpica/include/acnamesp.h> 68 69 #include <dev/acpica/acpivar.h> 70 #include <dev/acpica/acpiio.h> 71 72 #include <dev/pci/pcivar.h> 73 74 #include <vm/vm_param.h> 75 76 static MALLOC_DEFINE(M_ACPIDEV, "acpidev", "ACPI devices"); 77 78 /* Hooks for the ACPI CA debugging infrastructure */ 79 #define _COMPONENT ACPI_BUS 80 ACPI_MODULE_NAME("ACPI") 81 82 static d_open_t acpiopen; 83 static d_close_t acpiclose; 84 static d_ioctl_t acpiioctl; 85 86 static struct cdevsw acpi_cdevsw = { 87 .d_version = D_VERSION, 88 .d_open = acpiopen, 89 .d_close = acpiclose, 90 .d_ioctl = acpiioctl, 91 .d_name = "acpi", 92 }; 93 94 struct acpi_interface { 95 ACPI_STRING *data; 96 int num; 97 }; 98 99 static char *sysres_ids[] = { "PNP0C01", "PNP0C02", NULL }; 100 static char *pcilink_ids[] = { "PNP0C0F", NULL }; 101 102 /* Global mutex for locking access to the ACPI subsystem. */ 103 struct mtx acpi_mutex; 104 struct callout acpi_sleep_timer; 105 106 /* Bitmap of device quirks. */ 107 int acpi_quirks; 108 109 /* Supported sleep states. */ 110 static BOOLEAN acpi_sleep_states[ACPI_S_STATE_COUNT]; 111 112 static void acpi_lookup(void *arg, const char *name, device_t *dev); 113 static int acpi_modevent(struct module *mod, int event, void *junk); 114 static int acpi_probe(device_t dev); 115 static int acpi_attach(device_t dev); 116 static int acpi_suspend(device_t dev); 117 static int acpi_resume(device_t dev); 118 static int acpi_shutdown(device_t dev); 119 static device_t acpi_add_child(device_t bus, u_int order, const char *name, 120 int unit); 121 static int acpi_print_child(device_t bus, device_t child); 122 static void acpi_probe_nomatch(device_t bus, device_t child); 123 static void acpi_driver_added(device_t dev, driver_t *driver); 124 static void acpi_child_deleted(device_t dev, device_t child); 125 static int acpi_read_ivar(device_t dev, device_t child, int index, 126 uintptr_t *result); 127 static int acpi_write_ivar(device_t dev, device_t child, int index, 128 uintptr_t value); 129 static struct resource_list *acpi_get_rlist(device_t dev, device_t child); 130 static void acpi_reserve_resources(device_t dev); 131 static int acpi_sysres_alloc(device_t dev); 132 static int acpi_set_resource(device_t dev, device_t child, int type, 133 int rid, rman_res_t start, rman_res_t count); 134 static struct resource *acpi_alloc_resource(device_t bus, device_t child, 135 int type, int *rid, rman_res_t start, rman_res_t end, 136 rman_res_t count, u_int flags); 137 static int acpi_adjust_resource(device_t bus, device_t child, int type, 138 struct resource *r, rman_res_t start, rman_res_t end); 139 static int acpi_release_resource(device_t bus, device_t child, int type, 140 int rid, struct resource *r); 141 static void acpi_delete_resource(device_t bus, device_t child, int type, 142 int rid); 143 static uint32_t acpi_isa_get_logicalid(device_t dev); 144 static int acpi_isa_get_compatid(device_t dev, uint32_t *cids, int count); 145 static int acpi_device_id_probe(device_t bus, device_t dev, char **ids, char **match); 146 static ACPI_STATUS acpi_device_eval_obj(device_t bus, device_t dev, 147 ACPI_STRING pathname, ACPI_OBJECT_LIST *parameters, 148 ACPI_BUFFER *ret); 149 static ACPI_STATUS acpi_device_scan_cb(ACPI_HANDLE h, UINT32 level, 150 void *context, void **retval); 151 static ACPI_STATUS acpi_device_scan_children(device_t bus, device_t dev, 152 int max_depth, acpi_scan_cb_t user_fn, void *arg); 153 static int acpi_isa_pnp_probe(device_t bus, device_t child, 154 struct isa_pnp_id *ids); 155 static void acpi_probe_children(device_t bus); 156 static void acpi_probe_order(ACPI_HANDLE handle, int *order); 157 static ACPI_STATUS acpi_probe_child(ACPI_HANDLE handle, UINT32 level, 158 void *context, void **status); 159 static void acpi_sleep_enable(void *arg); 160 static ACPI_STATUS acpi_sleep_disable(struct acpi_softc *sc); 161 static ACPI_STATUS acpi_EnterSleepState(struct acpi_softc *sc, int state); 162 static void acpi_shutdown_final(void *arg, int howto); 163 static void acpi_enable_fixed_events(struct acpi_softc *sc); 164 static void acpi_resync_clock(struct acpi_softc *sc); 165 static int acpi_wake_sleep_prep(ACPI_HANDLE handle, int sstate); 166 static int acpi_wake_run_prep(ACPI_HANDLE handle, int sstate); 167 static int acpi_wake_prep_walk(int sstate); 168 static int acpi_wake_sysctl_walk(device_t dev); 169 static int acpi_wake_set_sysctl(SYSCTL_HANDLER_ARGS); 170 static void acpi_system_eventhandler_sleep(void *arg, int state); 171 static void acpi_system_eventhandler_wakeup(void *arg, int state); 172 static int acpi_sname2sstate(const char *sname); 173 static const char *acpi_sstate2sname(int sstate); 174 static int acpi_supported_sleep_state_sysctl(SYSCTL_HANDLER_ARGS); 175 static int acpi_sleep_state_sysctl(SYSCTL_HANDLER_ARGS); 176 static int acpi_debug_objects_sysctl(SYSCTL_HANDLER_ARGS); 177 static int acpi_pm_func(u_long cmd, void *arg, ...); 178 static int acpi_child_location_str_method(device_t acdev, device_t child, 179 char *buf, size_t buflen); 180 static int acpi_child_pnpinfo_str_method(device_t acdev, device_t child, 181 char *buf, size_t buflen); 182 static void acpi_enable_pcie(void); 183 static void acpi_hint_device_unit(device_t acdev, device_t child, 184 const char *name, int *unitp); 185 static void acpi_reset_interfaces(device_t dev); 186 187 static device_method_t acpi_methods[] = { 188 /* Device interface */ 189 DEVMETHOD(device_probe, acpi_probe), 190 DEVMETHOD(device_attach, acpi_attach), 191 DEVMETHOD(device_shutdown, acpi_shutdown), 192 DEVMETHOD(device_detach, bus_generic_detach), 193 DEVMETHOD(device_suspend, acpi_suspend), 194 DEVMETHOD(device_resume, acpi_resume), 195 196 /* Bus interface */ 197 DEVMETHOD(bus_add_child, acpi_add_child), 198 DEVMETHOD(bus_print_child, acpi_print_child), 199 DEVMETHOD(bus_probe_nomatch, acpi_probe_nomatch), 200 DEVMETHOD(bus_driver_added, acpi_driver_added), 201 DEVMETHOD(bus_child_deleted, acpi_child_deleted), 202 DEVMETHOD(bus_read_ivar, acpi_read_ivar), 203 DEVMETHOD(bus_write_ivar, acpi_write_ivar), 204 DEVMETHOD(bus_get_resource_list, acpi_get_rlist), 205 DEVMETHOD(bus_set_resource, acpi_set_resource), 206 DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource), 207 DEVMETHOD(bus_alloc_resource, acpi_alloc_resource), 208 DEVMETHOD(bus_adjust_resource, acpi_adjust_resource), 209 DEVMETHOD(bus_release_resource, acpi_release_resource), 210 DEVMETHOD(bus_delete_resource, acpi_delete_resource), 211 DEVMETHOD(bus_child_pnpinfo_str, acpi_child_pnpinfo_str_method), 212 DEVMETHOD(bus_child_location_str, acpi_child_location_str_method), 213 DEVMETHOD(bus_activate_resource, bus_generic_activate_resource), 214 DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource), 215 DEVMETHOD(bus_setup_intr, bus_generic_setup_intr), 216 DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr), 217 DEVMETHOD(bus_hint_device_unit, acpi_hint_device_unit), 218 DEVMETHOD(bus_get_cpus, acpi_get_cpus), 219 DEVMETHOD(bus_get_domain, acpi_get_domain), 220 221 /* ACPI bus */ 222 DEVMETHOD(acpi_id_probe, acpi_device_id_probe), 223 DEVMETHOD(acpi_evaluate_object, acpi_device_eval_obj), 224 DEVMETHOD(acpi_pwr_for_sleep, acpi_device_pwr_for_sleep), 225 DEVMETHOD(acpi_scan_children, acpi_device_scan_children), 226 227 /* ISA emulation */ 228 DEVMETHOD(isa_pnp_probe, acpi_isa_pnp_probe), 229 230 DEVMETHOD_END 231 }; 232 233 static driver_t acpi_driver = { 234 "acpi", 235 acpi_methods, 236 sizeof(struct acpi_softc), 237 }; 238 239 static devclass_t acpi_devclass; 240 EARLY_DRIVER_MODULE(acpi, nexus, acpi_driver, acpi_devclass, acpi_modevent, 0, 241 BUS_PASS_BUS + BUS_PASS_ORDER_MIDDLE); 242 MODULE_VERSION(acpi, 1); 243 244 ACPI_SERIAL_DECL(acpi, "ACPI root bus"); 245 246 /* Local pools for managing system resources for ACPI child devices. */ 247 static struct rman acpi_rman_io, acpi_rman_mem; 248 249 #define ACPI_MINIMUM_AWAKETIME 5 250 251 /* Holds the description of the acpi0 device. */ 252 static char acpi_desc[ACPI_OEM_ID_SIZE + ACPI_OEM_TABLE_ID_SIZE + 2]; 253 254 SYSCTL_NODE(_debug, OID_AUTO, acpi, CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, 255 "ACPI debugging"); 256 static char acpi_ca_version[12]; 257 SYSCTL_STRING(_debug_acpi, OID_AUTO, acpi_ca_version, CTLFLAG_RD, 258 acpi_ca_version, 0, "Version of Intel ACPI-CA"); 259 260 /* 261 * Allow overriding _OSI methods. 262 */ 263 static char acpi_install_interface[256]; 264 TUNABLE_STR("hw.acpi.install_interface", acpi_install_interface, 265 sizeof(acpi_install_interface)); 266 static char acpi_remove_interface[256]; 267 TUNABLE_STR("hw.acpi.remove_interface", acpi_remove_interface, 268 sizeof(acpi_remove_interface)); 269 270 /* Allow users to dump Debug objects without ACPI debugger. */ 271 static int acpi_debug_objects; 272 TUNABLE_INT("debug.acpi.enable_debug_objects", &acpi_debug_objects); 273 SYSCTL_PROC(_debug_acpi, OID_AUTO, enable_debug_objects, 274 CTLFLAG_RW | CTLTYPE_INT | CTLFLAG_NEEDGIANT, NULL, 0, 275 acpi_debug_objects_sysctl, "I", 276 "Enable Debug objects"); 277 278 /* Allow the interpreter to ignore common mistakes in BIOS. */ 279 static int acpi_interpreter_slack = 1; 280 TUNABLE_INT("debug.acpi.interpreter_slack", &acpi_interpreter_slack); 281 SYSCTL_INT(_debug_acpi, OID_AUTO, interpreter_slack, CTLFLAG_RDTUN, 282 &acpi_interpreter_slack, 1, "Turn on interpreter slack mode."); 283 284 /* Ignore register widths set by FADT and use default widths instead. */ 285 static int acpi_ignore_reg_width = 1; 286 TUNABLE_INT("debug.acpi.default_register_width", &acpi_ignore_reg_width); 287 SYSCTL_INT(_debug_acpi, OID_AUTO, default_register_width, CTLFLAG_RDTUN, 288 &acpi_ignore_reg_width, 1, "Ignore register widths set by FADT"); 289 290 /* Allow users to override quirks. */ 291 TUNABLE_INT("debug.acpi.quirks", &acpi_quirks); 292 293 int acpi_susp_bounce; 294 SYSCTL_INT(_debug_acpi, OID_AUTO, suspend_bounce, CTLFLAG_RW, 295 &acpi_susp_bounce, 0, "Don't actually suspend, just test devices."); 296 297 /* 298 * ACPI can only be loaded as a module by the loader; activating it after 299 * system bootstrap time is not useful, and can be fatal to the system. 300 * It also cannot be unloaded, since the entire system bus hierarchy hangs 301 * off it. 302 */ 303 static int 304 acpi_modevent(struct module *mod, int event, void *junk) 305 { 306 switch (event) { 307 case MOD_LOAD: 308 if (!cold) { 309 printf("The ACPI driver cannot be loaded after boot.\n"); 310 return (EPERM); 311 } 312 break; 313 case MOD_UNLOAD: 314 if (!cold && power_pm_get_type() == POWER_PM_TYPE_ACPI) 315 return (EBUSY); 316 break; 317 default: 318 break; 319 } 320 return (0); 321 } 322 323 /* 324 * Perform early initialization. 325 */ 326 ACPI_STATUS 327 acpi_Startup(void) 328 { 329 static int started = 0; 330 ACPI_STATUS status; 331 int val; 332 333 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 334 335 /* Only run the startup code once. The MADT driver also calls this. */ 336 if (started) 337 return_VALUE (AE_OK); 338 started = 1; 339 340 /* 341 * Initialize the ACPICA subsystem. 342 */ 343 if (ACPI_FAILURE(status = AcpiInitializeSubsystem())) { 344 printf("ACPI: Could not initialize Subsystem: %s\n", 345 AcpiFormatException(status)); 346 return_VALUE (status); 347 } 348 349 /* 350 * Pre-allocate space for RSDT/XSDT and DSDT tables and allow resizing 351 * if more tables exist. 352 */ 353 if (ACPI_FAILURE(status = AcpiInitializeTables(NULL, 2, TRUE))) { 354 printf("ACPI: Table initialisation failed: %s\n", 355 AcpiFormatException(status)); 356 return_VALUE (status); 357 } 358 359 /* Set up any quirks we have for this system. */ 360 if (acpi_quirks == ACPI_Q_OK) 361 acpi_table_quirks(&acpi_quirks); 362 363 /* If the user manually set the disabled hint to 0, force-enable ACPI. */ 364 if (resource_int_value("acpi", 0, "disabled", &val) == 0 && val == 0) 365 acpi_quirks &= ~ACPI_Q_BROKEN; 366 if (acpi_quirks & ACPI_Q_BROKEN) { 367 printf("ACPI disabled by blacklist. Contact your BIOS vendor.\n"); 368 status = AE_SUPPORT; 369 } 370 371 return_VALUE (status); 372 } 373 374 /* 375 * Detect ACPI and perform early initialisation. 376 */ 377 int 378 acpi_identify(void) 379 { 380 ACPI_TABLE_RSDP *rsdp; 381 ACPI_TABLE_HEADER *rsdt; 382 ACPI_PHYSICAL_ADDRESS paddr; 383 struct sbuf sb; 384 385 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 386 387 if (!cold) 388 return (ENXIO); 389 390 /* Check that we haven't been disabled with a hint. */ 391 if (resource_disabled("acpi", 0)) 392 return (ENXIO); 393 394 /* Check for other PM systems. */ 395 if (power_pm_get_type() != POWER_PM_TYPE_NONE && 396 power_pm_get_type() != POWER_PM_TYPE_ACPI) { 397 printf("ACPI identify failed, other PM system enabled.\n"); 398 return (ENXIO); 399 } 400 401 /* Initialize root tables. */ 402 if (ACPI_FAILURE(acpi_Startup())) { 403 printf("ACPI: Try disabling either ACPI or apic support.\n"); 404 return (ENXIO); 405 } 406 407 if ((paddr = AcpiOsGetRootPointer()) == 0 || 408 (rsdp = AcpiOsMapMemory(paddr, sizeof(ACPI_TABLE_RSDP))) == NULL) 409 return (ENXIO); 410 if (rsdp->Revision > 1 && rsdp->XsdtPhysicalAddress != 0) 411 paddr = (ACPI_PHYSICAL_ADDRESS)rsdp->XsdtPhysicalAddress; 412 else 413 paddr = (ACPI_PHYSICAL_ADDRESS)rsdp->RsdtPhysicalAddress; 414 AcpiOsUnmapMemory(rsdp, sizeof(ACPI_TABLE_RSDP)); 415 416 if ((rsdt = AcpiOsMapMemory(paddr, sizeof(ACPI_TABLE_HEADER))) == NULL) 417 return (ENXIO); 418 sbuf_new(&sb, acpi_desc, sizeof(acpi_desc), SBUF_FIXEDLEN); 419 sbuf_bcat(&sb, rsdt->OemId, ACPI_OEM_ID_SIZE); 420 sbuf_trim(&sb); 421 sbuf_putc(&sb, ' '); 422 sbuf_bcat(&sb, rsdt->OemTableId, ACPI_OEM_TABLE_ID_SIZE); 423 sbuf_trim(&sb); 424 sbuf_finish(&sb); 425 sbuf_delete(&sb); 426 AcpiOsUnmapMemory(rsdt, sizeof(ACPI_TABLE_HEADER)); 427 428 snprintf(acpi_ca_version, sizeof(acpi_ca_version), "%x", ACPI_CA_VERSION); 429 430 return (0); 431 } 432 433 /* 434 * Fetch some descriptive data from ACPI to put in our attach message. 435 */ 436 static int 437 acpi_probe(device_t dev) 438 { 439 440 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 441 442 device_set_desc(dev, acpi_desc); 443 444 return_VALUE (BUS_PROBE_NOWILDCARD); 445 } 446 447 static int 448 acpi_attach(device_t dev) 449 { 450 struct acpi_softc *sc; 451 ACPI_STATUS status; 452 int error, state; 453 UINT32 flags; 454 UINT8 TypeA, TypeB; 455 char *env; 456 457 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 458 459 sc = device_get_softc(dev); 460 sc->acpi_dev = dev; 461 callout_init(&sc->susp_force_to, 1); 462 463 error = ENXIO; 464 465 /* Initialize resource manager. */ 466 acpi_rman_io.rm_type = RMAN_ARRAY; 467 acpi_rman_io.rm_start = 0; 468 acpi_rman_io.rm_end = 0xffff; 469 acpi_rman_io.rm_descr = "ACPI I/O ports"; 470 if (rman_init(&acpi_rman_io) != 0) 471 panic("acpi rman_init IO ports failed"); 472 acpi_rman_mem.rm_type = RMAN_ARRAY; 473 acpi_rman_mem.rm_descr = "ACPI I/O memory addresses"; 474 if (rman_init(&acpi_rman_mem) != 0) 475 panic("acpi rman_init memory failed"); 476 477 /* Initialise the ACPI mutex */ 478 mtx_init(&acpi_mutex, "ACPI global lock", NULL, MTX_DEF); 479 480 /* 481 * Set the globals from our tunables. This is needed because ACPI-CA 482 * uses UINT8 for some values and we have no tunable_byte. 483 */ 484 AcpiGbl_EnableInterpreterSlack = acpi_interpreter_slack ? TRUE : FALSE; 485 AcpiGbl_EnableAmlDebugObject = acpi_debug_objects ? TRUE : FALSE; 486 AcpiGbl_UseDefaultRegisterWidths = acpi_ignore_reg_width ? TRUE : FALSE; 487 488 #ifndef ACPI_DEBUG 489 /* 490 * Disable all debugging layers and levels. 491 */ 492 AcpiDbgLayer = 0; 493 AcpiDbgLevel = 0; 494 #endif 495 496 /* Override OS interfaces if the user requested. */ 497 acpi_reset_interfaces(dev); 498 499 /* Load ACPI name space. */ 500 status = AcpiLoadTables(); 501 if (ACPI_FAILURE(status)) { 502 device_printf(dev, "Could not load Namespace: %s\n", 503 AcpiFormatException(status)); 504 goto out; 505 } 506 507 /* Handle MCFG table if present. */ 508 acpi_enable_pcie(); 509 510 /* 511 * Note that some systems (specifically, those with namespace evaluation 512 * issues that require the avoidance of parts of the namespace) must 513 * avoid running _INI and _STA on everything, as well as dodging the final 514 * object init pass. 515 * 516 * For these devices, we set ACPI_NO_DEVICE_INIT and ACPI_NO_OBJECT_INIT). 517 * 518 * XXX We should arrange for the object init pass after we have attached 519 * all our child devices, but on many systems it works here. 520 */ 521 flags = 0; 522 if (testenv("debug.acpi.avoid")) 523 flags = ACPI_NO_DEVICE_INIT | ACPI_NO_OBJECT_INIT; 524 525 /* Bring the hardware and basic handlers online. */ 526 if (ACPI_FAILURE(status = AcpiEnableSubsystem(flags))) { 527 device_printf(dev, "Could not enable ACPI: %s\n", 528 AcpiFormatException(status)); 529 goto out; 530 } 531 532 /* 533 * Call the ECDT probe function to provide EC functionality before 534 * the namespace has been evaluated. 535 * 536 * XXX This happens before the sysresource devices have been probed and 537 * attached so its resources come from nexus0. In practice, this isn't 538 * a problem but should be addressed eventually. 539 */ 540 acpi_ec_ecdt_probe(dev); 541 542 /* Bring device objects and regions online. */ 543 if (ACPI_FAILURE(status = AcpiInitializeObjects(flags))) { 544 device_printf(dev, "Could not initialize ACPI objects: %s\n", 545 AcpiFormatException(status)); 546 goto out; 547 } 548 549 /* 550 * Setup our sysctl tree. 551 * 552 * XXX: This doesn't check to make sure that none of these fail. 553 */ 554 sysctl_ctx_init(&sc->acpi_sysctl_ctx); 555 sc->acpi_sysctl_tree = SYSCTL_ADD_NODE(&sc->acpi_sysctl_ctx, 556 SYSCTL_STATIC_CHILDREN(_hw), OID_AUTO, device_get_name(dev), 557 CTLFLAG_RD | CTLFLAG_MPSAFE, 0, ""); 558 SYSCTL_ADD_PROC(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 559 OID_AUTO, "supported_sleep_state", 560 CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_NEEDGIANT, 561 0, 0, acpi_supported_sleep_state_sysctl, "A", 562 "List supported ACPI sleep states."); 563 SYSCTL_ADD_PROC(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 564 OID_AUTO, "power_button_state", 565 CTLTYPE_STRING | CTLFLAG_RW | CTLFLAG_NEEDGIANT, 566 &sc->acpi_power_button_sx, 0, acpi_sleep_state_sysctl, "A", 567 "Power button ACPI sleep state."); 568 SYSCTL_ADD_PROC(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 569 OID_AUTO, "sleep_button_state", 570 CTLTYPE_STRING | CTLFLAG_RW | CTLFLAG_NEEDGIANT, 571 &sc->acpi_sleep_button_sx, 0, acpi_sleep_state_sysctl, "A", 572 "Sleep button ACPI sleep state."); 573 SYSCTL_ADD_PROC(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 574 OID_AUTO, "lid_switch_state", 575 CTLTYPE_STRING | CTLFLAG_RW | CTLFLAG_NEEDGIANT, 576 &sc->acpi_lid_switch_sx, 0, acpi_sleep_state_sysctl, "A", 577 "Lid ACPI sleep state. Set to S3 if you want to suspend your laptop when close the Lid."); 578 SYSCTL_ADD_PROC(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 579 OID_AUTO, "standby_state", 580 CTLTYPE_STRING | CTLFLAG_RW | CTLFLAG_NEEDGIANT, 581 &sc->acpi_standby_sx, 0, acpi_sleep_state_sysctl, "A", ""); 582 SYSCTL_ADD_PROC(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 583 OID_AUTO, "suspend_state", 584 CTLTYPE_STRING | CTLFLAG_RW | CTLFLAG_NEEDGIANT, 585 &sc->acpi_suspend_sx, 0, acpi_sleep_state_sysctl, "A", ""); 586 SYSCTL_ADD_INT(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 587 OID_AUTO, "sleep_delay", CTLFLAG_RW, &sc->acpi_sleep_delay, 0, 588 "sleep delay in seconds"); 589 SYSCTL_ADD_INT(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 590 OID_AUTO, "s4bios", CTLFLAG_RW, &sc->acpi_s4bios, 0, "S4BIOS mode"); 591 SYSCTL_ADD_INT(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 592 OID_AUTO, "verbose", CTLFLAG_RW, &sc->acpi_verbose, 0, "verbose mode"); 593 SYSCTL_ADD_INT(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 594 OID_AUTO, "disable_on_reboot", CTLFLAG_RW, 595 &sc->acpi_do_disable, 0, "Disable ACPI when rebooting/halting system"); 596 SYSCTL_ADD_INT(&sc->acpi_sysctl_ctx, SYSCTL_CHILDREN(sc->acpi_sysctl_tree), 597 OID_AUTO, "handle_reboot", CTLFLAG_RW, 598 &sc->acpi_handle_reboot, 0, "Use ACPI Reset Register to reboot"); 599 600 /* 601 * Default to 1 second before sleeping to give some machines time to 602 * stabilize. 603 */ 604 sc->acpi_sleep_delay = 1; 605 if (bootverbose) 606 sc->acpi_verbose = 1; 607 if ((env = kern_getenv("hw.acpi.verbose")) != NULL) { 608 if (strcmp(env, "0") != 0) 609 sc->acpi_verbose = 1; 610 freeenv(env); 611 } 612 613 /* Only enable reboot by default if the FADT says it is available. */ 614 if (AcpiGbl_FADT.Flags & ACPI_FADT_RESET_REGISTER) 615 sc->acpi_handle_reboot = 1; 616 617 #if !ACPI_REDUCED_HARDWARE 618 /* Only enable S4BIOS by default if the FACS says it is available. */ 619 if (AcpiGbl_FACS != NULL && AcpiGbl_FACS->Flags & ACPI_FACS_S4_BIOS_PRESENT) 620 sc->acpi_s4bios = 1; 621 #endif 622 623 /* Probe all supported sleep states. */ 624 acpi_sleep_states[ACPI_STATE_S0] = TRUE; 625 for (state = ACPI_STATE_S1; state < ACPI_S_STATE_COUNT; state++) 626 if (ACPI_SUCCESS(AcpiEvaluateObject(ACPI_ROOT_OBJECT, 627 __DECONST(char *, AcpiGbl_SleepStateNames[state]), NULL, NULL)) && 628 ACPI_SUCCESS(AcpiGetSleepTypeData(state, &TypeA, &TypeB))) 629 acpi_sleep_states[state] = TRUE; 630 631 /* 632 * Dispatch the default sleep state to devices. The lid switch is set 633 * to UNKNOWN by default to avoid surprising users. 634 */ 635 sc->acpi_power_button_sx = acpi_sleep_states[ACPI_STATE_S5] ? 636 ACPI_STATE_S5 : ACPI_STATE_UNKNOWN; 637 sc->acpi_lid_switch_sx = ACPI_STATE_UNKNOWN; 638 sc->acpi_standby_sx = acpi_sleep_states[ACPI_STATE_S1] ? 639 ACPI_STATE_S1 : ACPI_STATE_UNKNOWN; 640 sc->acpi_suspend_sx = acpi_sleep_states[ACPI_STATE_S3] ? 641 ACPI_STATE_S3 : ACPI_STATE_UNKNOWN; 642 643 /* Pick the first valid sleep state for the sleep button default. */ 644 sc->acpi_sleep_button_sx = ACPI_STATE_UNKNOWN; 645 for (state = ACPI_STATE_S1; state <= ACPI_STATE_S4; state++) 646 if (acpi_sleep_states[state]) { 647 sc->acpi_sleep_button_sx = state; 648 break; 649 } 650 651 acpi_enable_fixed_events(sc); 652 653 /* 654 * Scan the namespace and attach/initialise children. 655 */ 656 657 /* Register our shutdown handler. */ 658 EVENTHANDLER_REGISTER(shutdown_final, acpi_shutdown_final, sc, 659 SHUTDOWN_PRI_LAST); 660 661 /* 662 * Register our acpi event handlers. 663 * XXX should be configurable eg. via userland policy manager. 664 */ 665 EVENTHANDLER_REGISTER(acpi_sleep_event, acpi_system_eventhandler_sleep, 666 sc, ACPI_EVENT_PRI_LAST); 667 EVENTHANDLER_REGISTER(acpi_wakeup_event, acpi_system_eventhandler_wakeup, 668 sc, ACPI_EVENT_PRI_LAST); 669 670 /* Flag our initial states. */ 671 sc->acpi_enabled = TRUE; 672 sc->acpi_sstate = ACPI_STATE_S0; 673 sc->acpi_sleep_disabled = TRUE; 674 675 /* Create the control device */ 676 sc->acpi_dev_t = make_dev(&acpi_cdevsw, 0, UID_ROOT, GID_OPERATOR, 0664, 677 "acpi"); 678 sc->acpi_dev_t->si_drv1 = sc; 679 680 if ((error = acpi_machdep_init(dev))) 681 goto out; 682 683 /* Register ACPI again to pass the correct argument of pm_func. */ 684 power_pm_register(POWER_PM_TYPE_ACPI, acpi_pm_func, sc); 685 686 if (!acpi_disabled("bus")) { 687 EVENTHANDLER_REGISTER(dev_lookup, acpi_lookup, NULL, 1000); 688 acpi_probe_children(dev); 689 } 690 691 /* Update all GPEs and enable runtime GPEs. */ 692 status = AcpiUpdateAllGpes(); 693 if (ACPI_FAILURE(status)) 694 device_printf(dev, "Could not update all GPEs: %s\n", 695 AcpiFormatException(status)); 696 697 /* Allow sleep request after a while. */ 698 callout_init_mtx(&acpi_sleep_timer, &acpi_mutex, 0); 699 callout_reset(&acpi_sleep_timer, hz * ACPI_MINIMUM_AWAKETIME, 700 acpi_sleep_enable, sc); 701 702 error = 0; 703 704 out: 705 return_VALUE (error); 706 } 707 708 static void 709 acpi_set_power_children(device_t dev, int state) 710 { 711 device_t child; 712 device_t *devlist; 713 int dstate, i, numdevs; 714 715 if (device_get_children(dev, &devlist, &numdevs) != 0) 716 return; 717 718 /* 719 * Retrieve and set D-state for the sleep state if _SxD is present. 720 * Skip children who aren't attached since they are handled separately. 721 */ 722 for (i = 0; i < numdevs; i++) { 723 child = devlist[i]; 724 dstate = state; 725 if (device_is_attached(child) && 726 acpi_device_pwr_for_sleep(dev, child, &dstate) == 0) 727 acpi_set_powerstate(child, dstate); 728 } 729 free(devlist, M_TEMP); 730 } 731 732 static int 733 acpi_suspend(device_t dev) 734 { 735 int error; 736 737 GIANT_REQUIRED; 738 739 error = bus_generic_suspend(dev); 740 if (error == 0) 741 acpi_set_power_children(dev, ACPI_STATE_D3); 742 743 return (error); 744 } 745 746 static int 747 acpi_resume(device_t dev) 748 { 749 750 GIANT_REQUIRED; 751 752 acpi_set_power_children(dev, ACPI_STATE_D0); 753 754 return (bus_generic_resume(dev)); 755 } 756 757 static int 758 acpi_shutdown(device_t dev) 759 { 760 761 GIANT_REQUIRED; 762 763 /* Allow children to shutdown first. */ 764 bus_generic_shutdown(dev); 765 766 /* 767 * Enable any GPEs that are able to power-on the system (i.e., RTC). 768 * Also, disable any that are not valid for this state (most). 769 */ 770 acpi_wake_prep_walk(ACPI_STATE_S5); 771 772 return (0); 773 } 774 775 /* 776 * Handle a new device being added 777 */ 778 static device_t 779 acpi_add_child(device_t bus, u_int order, const char *name, int unit) 780 { 781 struct acpi_device *ad; 782 device_t child; 783 784 if ((ad = malloc(sizeof(*ad), M_ACPIDEV, M_NOWAIT | M_ZERO)) == NULL) 785 return (NULL); 786 787 resource_list_init(&ad->ad_rl); 788 789 child = device_add_child_ordered(bus, order, name, unit); 790 if (child != NULL) 791 device_set_ivars(child, ad); 792 else 793 free(ad, M_ACPIDEV); 794 return (child); 795 } 796 797 static int 798 acpi_print_child(device_t bus, device_t child) 799 { 800 struct acpi_device *adev = device_get_ivars(child); 801 struct resource_list *rl = &adev->ad_rl; 802 int retval = 0; 803 804 retval += bus_print_child_header(bus, child); 805 retval += resource_list_print_type(rl, "port", SYS_RES_IOPORT, "%#jx"); 806 retval += resource_list_print_type(rl, "iomem", SYS_RES_MEMORY, "%#jx"); 807 retval += resource_list_print_type(rl, "irq", SYS_RES_IRQ, "%jd"); 808 retval += resource_list_print_type(rl, "drq", SYS_RES_DRQ, "%jd"); 809 if (device_get_flags(child)) 810 retval += printf(" flags %#x", device_get_flags(child)); 811 retval += bus_print_child_domain(bus, child); 812 retval += bus_print_child_footer(bus, child); 813 814 return (retval); 815 } 816 817 /* 818 * If this device is an ACPI child but no one claimed it, attempt 819 * to power it off. We'll power it back up when a driver is added. 820 * 821 * XXX Disabled for now since many necessary devices (like fdc and 822 * ATA) don't claim the devices we created for them but still expect 823 * them to be powered up. 824 */ 825 static void 826 acpi_probe_nomatch(device_t bus, device_t child) 827 { 828 #ifdef ACPI_ENABLE_POWERDOWN_NODRIVER 829 acpi_set_powerstate(child, ACPI_STATE_D3); 830 #endif 831 } 832 833 /* 834 * If a new driver has a chance to probe a child, first power it up. 835 * 836 * XXX Disabled for now (see acpi_probe_nomatch for details). 837 */ 838 static void 839 acpi_driver_added(device_t dev, driver_t *driver) 840 { 841 device_t child, *devlist; 842 int i, numdevs; 843 844 DEVICE_IDENTIFY(driver, dev); 845 if (device_get_children(dev, &devlist, &numdevs)) 846 return; 847 for (i = 0; i < numdevs; i++) { 848 child = devlist[i]; 849 if (device_get_state(child) == DS_NOTPRESENT) { 850 #ifdef ACPI_ENABLE_POWERDOWN_NODRIVER 851 acpi_set_powerstate(child, ACPI_STATE_D0); 852 if (device_probe_and_attach(child) != 0) 853 acpi_set_powerstate(child, ACPI_STATE_D3); 854 #else 855 device_probe_and_attach(child); 856 #endif 857 } 858 } 859 free(devlist, M_TEMP); 860 } 861 862 /* Location hint for devctl(8) */ 863 static int 864 acpi_child_location_str_method(device_t cbdev, device_t child, char *buf, 865 size_t buflen) 866 { 867 struct acpi_device *dinfo = device_get_ivars(child); 868 char buf2[32]; 869 int pxm; 870 871 if (dinfo->ad_handle) { 872 snprintf(buf, buflen, "handle=%s", acpi_name(dinfo->ad_handle)); 873 if (ACPI_SUCCESS(acpi_GetInteger(dinfo->ad_handle, "_PXM", &pxm))) { 874 snprintf(buf2, 32, " _PXM=%d", pxm); 875 strlcat(buf, buf2, buflen); 876 } 877 } else { 878 snprintf(buf, buflen, ""); 879 } 880 return (0); 881 } 882 883 /* PnP information for devctl(8) */ 884 int 885 acpi_pnpinfo_str(ACPI_HANDLE handle, char *buf, size_t buflen) 886 { 887 ACPI_DEVICE_INFO *adinfo; 888 889 if (ACPI_FAILURE(AcpiGetObjectInfo(handle, &adinfo))) { 890 snprintf(buf, buflen, "unknown"); 891 return (0); 892 } 893 894 snprintf(buf, buflen, "_HID=%s _UID=%lu _CID=%s", 895 (adinfo->Valid & ACPI_VALID_HID) ? 896 adinfo->HardwareId.String : "none", 897 (adinfo->Valid & ACPI_VALID_UID) ? 898 strtoul(adinfo->UniqueId.String, NULL, 10) : 0UL, 899 ((adinfo->Valid & ACPI_VALID_CID) && 900 adinfo->CompatibleIdList.Count > 0) ? 901 adinfo->CompatibleIdList.Ids[0].String : "none"); 902 AcpiOsFree(adinfo); 903 904 return (0); 905 } 906 907 static int 908 acpi_child_pnpinfo_str_method(device_t cbdev, device_t child, char *buf, 909 size_t buflen) 910 { 911 struct acpi_device *dinfo = device_get_ivars(child); 912 913 return (acpi_pnpinfo_str(dinfo->ad_handle, buf, buflen)); 914 } 915 916 /* 917 * Handle device deletion. 918 */ 919 static void 920 acpi_child_deleted(device_t dev, device_t child) 921 { 922 struct acpi_device *dinfo = device_get_ivars(child); 923 924 if (acpi_get_device(dinfo->ad_handle) == child) 925 AcpiDetachData(dinfo->ad_handle, acpi_fake_objhandler); 926 } 927 928 /* 929 * Handle per-device ivars 930 */ 931 static int 932 acpi_read_ivar(device_t dev, device_t child, int index, uintptr_t *result) 933 { 934 struct acpi_device *ad; 935 936 if ((ad = device_get_ivars(child)) == NULL) { 937 device_printf(child, "device has no ivars\n"); 938 return (ENOENT); 939 } 940 941 /* ACPI and ISA compatibility ivars */ 942 switch(index) { 943 case ACPI_IVAR_HANDLE: 944 *(ACPI_HANDLE *)result = ad->ad_handle; 945 break; 946 case ACPI_IVAR_PRIVATE: 947 *(void **)result = ad->ad_private; 948 break; 949 case ACPI_IVAR_FLAGS: 950 *(int *)result = ad->ad_flags; 951 break; 952 case ISA_IVAR_VENDORID: 953 case ISA_IVAR_SERIAL: 954 case ISA_IVAR_COMPATID: 955 *(int *)result = -1; 956 break; 957 case ISA_IVAR_LOGICALID: 958 *(int *)result = acpi_isa_get_logicalid(child); 959 break; 960 case PCI_IVAR_CLASS: 961 *(uint8_t*)result = (ad->ad_cls_class >> 16) & 0xff; 962 break; 963 case PCI_IVAR_SUBCLASS: 964 *(uint8_t*)result = (ad->ad_cls_class >> 8) & 0xff; 965 break; 966 case PCI_IVAR_PROGIF: 967 *(uint8_t*)result = (ad->ad_cls_class >> 0) & 0xff; 968 break; 969 default: 970 return (ENOENT); 971 } 972 973 return (0); 974 } 975 976 static int 977 acpi_write_ivar(device_t dev, device_t child, int index, uintptr_t value) 978 { 979 struct acpi_device *ad; 980 981 if ((ad = device_get_ivars(child)) == NULL) { 982 device_printf(child, "device has no ivars\n"); 983 return (ENOENT); 984 } 985 986 switch(index) { 987 case ACPI_IVAR_HANDLE: 988 ad->ad_handle = (ACPI_HANDLE)value; 989 break; 990 case ACPI_IVAR_PRIVATE: 991 ad->ad_private = (void *)value; 992 break; 993 case ACPI_IVAR_FLAGS: 994 ad->ad_flags = (int)value; 995 break; 996 default: 997 panic("bad ivar write request (%d)", index); 998 return (ENOENT); 999 } 1000 1001 return (0); 1002 } 1003 1004 /* 1005 * Handle child resource allocation/removal 1006 */ 1007 static struct resource_list * 1008 acpi_get_rlist(device_t dev, device_t child) 1009 { 1010 struct acpi_device *ad; 1011 1012 ad = device_get_ivars(child); 1013 return (&ad->ad_rl); 1014 } 1015 1016 static int 1017 acpi_match_resource_hint(device_t dev, int type, long value) 1018 { 1019 struct acpi_device *ad = device_get_ivars(dev); 1020 struct resource_list *rl = &ad->ad_rl; 1021 struct resource_list_entry *rle; 1022 1023 STAILQ_FOREACH(rle, rl, link) { 1024 if (rle->type != type) 1025 continue; 1026 if (rle->start <= value && rle->end >= value) 1027 return (1); 1028 } 1029 return (0); 1030 } 1031 1032 /* 1033 * Wire device unit numbers based on resource matches in hints. 1034 */ 1035 static void 1036 acpi_hint_device_unit(device_t acdev, device_t child, const char *name, 1037 int *unitp) 1038 { 1039 const char *s; 1040 long value; 1041 int line, matches, unit; 1042 1043 /* 1044 * Iterate over all the hints for the devices with the specified 1045 * name to see if one's resources are a subset of this device. 1046 */ 1047 line = 0; 1048 while (resource_find_dev(&line, name, &unit, "at", NULL) == 0) { 1049 /* Must have an "at" for acpi or isa. */ 1050 resource_string_value(name, unit, "at", &s); 1051 if (!(strcmp(s, "acpi0") == 0 || strcmp(s, "acpi") == 0 || 1052 strcmp(s, "isa0") == 0 || strcmp(s, "isa") == 0)) 1053 continue; 1054 1055 /* 1056 * Check for matching resources. We must have at least one match. 1057 * Since I/O and memory resources cannot be shared, if we get a 1058 * match on either of those, ignore any mismatches in IRQs or DRQs. 1059 * 1060 * XXX: We may want to revisit this to be more lenient and wire 1061 * as long as it gets one match. 1062 */ 1063 matches = 0; 1064 if (resource_long_value(name, unit, "port", &value) == 0) { 1065 /* 1066 * Floppy drive controllers are notorious for having a 1067 * wide variety of resources not all of which include the 1068 * first port that is specified by the hint (typically 1069 * 0x3f0) (see the comment above fdc_isa_alloc_resources() 1070 * in fdc_isa.c). However, they do all seem to include 1071 * port + 2 (e.g. 0x3f2) so for a floppy device, look for 1072 * 'value + 2' in the port resources instead of the hint 1073 * value. 1074 */ 1075 if (strcmp(name, "fdc") == 0) 1076 value += 2; 1077 if (acpi_match_resource_hint(child, SYS_RES_IOPORT, value)) 1078 matches++; 1079 else 1080 continue; 1081 } 1082 if (resource_long_value(name, unit, "maddr", &value) == 0) { 1083 if (acpi_match_resource_hint(child, SYS_RES_MEMORY, value)) 1084 matches++; 1085 else 1086 continue; 1087 } 1088 if (matches > 0) 1089 goto matched; 1090 if (resource_long_value(name, unit, "irq", &value) == 0) { 1091 if (acpi_match_resource_hint(child, SYS_RES_IRQ, value)) 1092 matches++; 1093 else 1094 continue; 1095 } 1096 if (resource_long_value(name, unit, "drq", &value) == 0) { 1097 if (acpi_match_resource_hint(child, SYS_RES_DRQ, value)) 1098 matches++; 1099 else 1100 continue; 1101 } 1102 1103 matched: 1104 if (matches > 0) { 1105 /* We have a winner! */ 1106 *unitp = unit; 1107 break; 1108 } 1109 } 1110 } 1111 1112 /* 1113 * Fetch the NUMA domain for a device by mapping the value returned by 1114 * _PXM to a NUMA domain. If the device does not have a _PXM method, 1115 * -2 is returned. If any other error occurs, -1 is returned. 1116 */ 1117 static int 1118 acpi_parse_pxm(device_t dev) 1119 { 1120 #ifdef NUMA 1121 #if defined(__i386__) || defined(__amd64__) 1122 ACPI_HANDLE handle; 1123 ACPI_STATUS status; 1124 int pxm; 1125 1126 handle = acpi_get_handle(dev); 1127 if (handle == NULL) 1128 return (-2); 1129 status = acpi_GetInteger(handle, "_PXM", &pxm); 1130 if (ACPI_SUCCESS(status)) 1131 return (acpi_map_pxm_to_vm_domainid(pxm)); 1132 if (status == AE_NOT_FOUND) 1133 return (-2); 1134 #endif 1135 #endif 1136 return (-1); 1137 } 1138 1139 int 1140 acpi_get_cpus(device_t dev, device_t child, enum cpu_sets op, size_t setsize, 1141 cpuset_t *cpuset) 1142 { 1143 int d, error; 1144 1145 d = acpi_parse_pxm(child); 1146 if (d < 0) 1147 return (bus_generic_get_cpus(dev, child, op, setsize, cpuset)); 1148 1149 switch (op) { 1150 case LOCAL_CPUS: 1151 if (setsize != sizeof(cpuset_t)) 1152 return (EINVAL); 1153 *cpuset = cpuset_domain[d]; 1154 return (0); 1155 case INTR_CPUS: 1156 error = bus_generic_get_cpus(dev, child, op, setsize, cpuset); 1157 if (error != 0) 1158 return (error); 1159 if (setsize != sizeof(cpuset_t)) 1160 return (EINVAL); 1161 CPU_AND(cpuset, &cpuset_domain[d]); 1162 return (0); 1163 default: 1164 return (bus_generic_get_cpus(dev, child, op, setsize, cpuset)); 1165 } 1166 } 1167 1168 /* 1169 * Fetch the NUMA domain for the given device 'dev'. 1170 * 1171 * If a device has a _PXM method, map that to a NUMA domain. 1172 * Otherwise, pass the request up to the parent. 1173 * If there's no matching domain or the domain cannot be 1174 * determined, return ENOENT. 1175 */ 1176 int 1177 acpi_get_domain(device_t dev, device_t child, int *domain) 1178 { 1179 int d; 1180 1181 d = acpi_parse_pxm(child); 1182 if (d >= 0) { 1183 *domain = d; 1184 return (0); 1185 } 1186 if (d == -1) 1187 return (ENOENT); 1188 1189 /* No _PXM node; go up a level */ 1190 return (bus_generic_get_domain(dev, child, domain)); 1191 } 1192 1193 /* 1194 * Pre-allocate/manage all memory and IO resources. Since rman can't handle 1195 * duplicates, we merge any in the sysresource attach routine. 1196 */ 1197 static int 1198 acpi_sysres_alloc(device_t dev) 1199 { 1200 struct resource *res; 1201 struct resource_list *rl; 1202 struct resource_list_entry *rle; 1203 struct rman *rm; 1204 device_t *children; 1205 int child_count, i; 1206 1207 /* 1208 * Probe/attach any sysresource devices. This would be unnecessary if we 1209 * had multi-pass probe/attach. 1210 */ 1211 if (device_get_children(dev, &children, &child_count) != 0) 1212 return (ENXIO); 1213 for (i = 0; i < child_count; i++) { 1214 if (ACPI_ID_PROBE(dev, children[i], sysres_ids, NULL) <= 0) 1215 device_probe_and_attach(children[i]); 1216 } 1217 free(children, M_TEMP); 1218 1219 rl = BUS_GET_RESOURCE_LIST(device_get_parent(dev), dev); 1220 STAILQ_FOREACH(rle, rl, link) { 1221 if (rle->res != NULL) { 1222 device_printf(dev, "duplicate resource for %jx\n", rle->start); 1223 continue; 1224 } 1225 1226 /* Only memory and IO resources are valid here. */ 1227 switch (rle->type) { 1228 case SYS_RES_IOPORT: 1229 rm = &acpi_rman_io; 1230 break; 1231 case SYS_RES_MEMORY: 1232 rm = &acpi_rman_mem; 1233 break; 1234 default: 1235 continue; 1236 } 1237 1238 /* Pre-allocate resource and add to our rman pool. */ 1239 res = BUS_ALLOC_RESOURCE(device_get_parent(dev), dev, rle->type, 1240 &rle->rid, rle->start, rle->start + rle->count - 1, rle->count, 0); 1241 if (res != NULL) { 1242 rman_manage_region(rm, rman_get_start(res), rman_get_end(res)); 1243 rle->res = res; 1244 } else if (bootverbose) 1245 device_printf(dev, "reservation of %jx, %jx (%d) failed\n", 1246 rle->start, rle->count, rle->type); 1247 } 1248 return (0); 1249 } 1250 1251 /* 1252 * Reserve declared resources for devices found during attach once system 1253 * resources have been allocated. 1254 */ 1255 static void 1256 acpi_reserve_resources(device_t dev) 1257 { 1258 struct resource_list_entry *rle; 1259 struct resource_list *rl; 1260 struct acpi_device *ad; 1261 struct acpi_softc *sc; 1262 device_t *children; 1263 int child_count, i; 1264 1265 sc = device_get_softc(dev); 1266 if (device_get_children(dev, &children, &child_count) != 0) 1267 return; 1268 for (i = 0; i < child_count; i++) { 1269 ad = device_get_ivars(children[i]); 1270 rl = &ad->ad_rl; 1271 1272 /* Don't reserve system resources. */ 1273 if (ACPI_ID_PROBE(dev, children[i], sysres_ids, NULL) <= 0) 1274 continue; 1275 1276 STAILQ_FOREACH(rle, rl, link) { 1277 /* 1278 * Don't reserve IRQ resources. There are many sticky things 1279 * to get right otherwise (e.g. IRQs for psm, atkbd, and HPET 1280 * when using legacy routing). 1281 */ 1282 if (rle->type == SYS_RES_IRQ) 1283 continue; 1284 1285 /* 1286 * Don't reserve the resource if it is already allocated. 1287 * The acpi_ec(4) driver can allocate its resources early 1288 * if ECDT is present. 1289 */ 1290 if (rle->res != NULL) 1291 continue; 1292 1293 /* 1294 * Try to reserve the resource from our parent. If this 1295 * fails because the resource is a system resource, just 1296 * let it be. The resource range is already reserved so 1297 * that other devices will not use it. If the driver 1298 * needs to allocate the resource, then 1299 * acpi_alloc_resource() will sub-alloc from the system 1300 * resource. 1301 */ 1302 resource_list_reserve(rl, dev, children[i], rle->type, &rle->rid, 1303 rle->start, rle->end, rle->count, 0); 1304 } 1305 } 1306 free(children, M_TEMP); 1307 sc->acpi_resources_reserved = 1; 1308 } 1309 1310 static int 1311 acpi_set_resource(device_t dev, device_t child, int type, int rid, 1312 rman_res_t start, rman_res_t count) 1313 { 1314 struct acpi_softc *sc = device_get_softc(dev); 1315 struct acpi_device *ad = device_get_ivars(child); 1316 struct resource_list *rl = &ad->ad_rl; 1317 ACPI_DEVICE_INFO *devinfo; 1318 rman_res_t end; 1319 int allow; 1320 1321 /* Ignore IRQ resources for PCI link devices. */ 1322 if (type == SYS_RES_IRQ && 1323 ACPI_ID_PROBE(dev, child, pcilink_ids, NULL) <= 0) 1324 return (0); 1325 1326 /* 1327 * Ignore most resources for PCI root bridges. Some BIOSes 1328 * incorrectly enumerate the memory ranges they decode as plain 1329 * memory resources instead of as ResourceProducer ranges. Other 1330 * BIOSes incorrectly list system resource entries for I/O ranges 1331 * under the PCI bridge. Do allow the one known-correct case on 1332 * x86 of a PCI bridge claiming the I/O ports used for PCI config 1333 * access. 1334 */ 1335 if (type == SYS_RES_MEMORY || type == SYS_RES_IOPORT) { 1336 if (ACPI_SUCCESS(AcpiGetObjectInfo(ad->ad_handle, &devinfo))) { 1337 if ((devinfo->Flags & ACPI_PCI_ROOT_BRIDGE) != 0) { 1338 #if defined(__i386__) || defined(__amd64__) 1339 allow = (type == SYS_RES_IOPORT && start == CONF1_ADDR_PORT); 1340 #else 1341 allow = 0; 1342 #endif 1343 if (!allow) { 1344 AcpiOsFree(devinfo); 1345 return (0); 1346 } 1347 } 1348 AcpiOsFree(devinfo); 1349 } 1350 } 1351 1352 #ifdef INTRNG 1353 /* map with default for now */ 1354 if (type == SYS_RES_IRQ) 1355 start = (rman_res_t)acpi_map_intr(child, (u_int)start, 1356 acpi_get_handle(child)); 1357 #endif 1358 1359 /* If the resource is already allocated, fail. */ 1360 if (resource_list_busy(rl, type, rid)) 1361 return (EBUSY); 1362 1363 /* If the resource is already reserved, release it. */ 1364 if (resource_list_reserved(rl, type, rid)) 1365 resource_list_unreserve(rl, dev, child, type, rid); 1366 1367 /* Add the resource. */ 1368 end = (start + count - 1); 1369 resource_list_add(rl, type, rid, start, end, count); 1370 1371 /* Don't reserve resources until the system resources are allocated. */ 1372 if (!sc->acpi_resources_reserved) 1373 return (0); 1374 1375 /* Don't reserve system resources. */ 1376 if (ACPI_ID_PROBE(dev, child, sysres_ids, NULL) <= 0) 1377 return (0); 1378 1379 /* 1380 * Don't reserve IRQ resources. There are many sticky things to 1381 * get right otherwise (e.g. IRQs for psm, atkbd, and HPET when 1382 * using legacy routing). 1383 */ 1384 if (type == SYS_RES_IRQ) 1385 return (0); 1386 1387 /* 1388 * Don't reserve resources for CPU devices. Some of these 1389 * resources need to be allocated as shareable, but reservations 1390 * are always non-shareable. 1391 */ 1392 if (device_get_devclass(child) == devclass_find("cpu")) 1393 return (0); 1394 1395 /* 1396 * Reserve the resource. 1397 * 1398 * XXX: Ignores failure for now. Failure here is probably a 1399 * BIOS/firmware bug? 1400 */ 1401 resource_list_reserve(rl, dev, child, type, &rid, start, end, count, 0); 1402 return (0); 1403 } 1404 1405 static struct resource * 1406 acpi_alloc_resource(device_t bus, device_t child, int type, int *rid, 1407 rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) 1408 { 1409 #ifndef INTRNG 1410 ACPI_RESOURCE ares; 1411 #endif 1412 struct acpi_device *ad; 1413 struct resource_list_entry *rle; 1414 struct resource_list *rl; 1415 struct resource *res; 1416 int isdefault = RMAN_IS_DEFAULT_RANGE(start, end); 1417 1418 /* 1419 * First attempt at allocating the resource. For direct children, 1420 * use resource_list_alloc() to handle reserved resources. For 1421 * other devices, pass the request up to our parent. 1422 */ 1423 if (bus == device_get_parent(child)) { 1424 ad = device_get_ivars(child); 1425 rl = &ad->ad_rl; 1426 1427 /* 1428 * Simulate the behavior of the ISA bus for direct children 1429 * devices. That is, if a non-default range is specified for 1430 * a resource that doesn't exist, use bus_set_resource() to 1431 * add the resource before allocating it. Note that these 1432 * resources will not be reserved. 1433 */ 1434 if (!isdefault && resource_list_find(rl, type, *rid) == NULL) 1435 resource_list_add(rl, type, *rid, start, end, count); 1436 res = resource_list_alloc(rl, bus, child, type, rid, start, end, count, 1437 flags); 1438 #ifndef INTRNG 1439 if (res != NULL && type == SYS_RES_IRQ) { 1440 /* 1441 * Since bus_config_intr() takes immediate effect, we cannot 1442 * configure the interrupt associated with a device when we 1443 * parse the resources but have to defer it until a driver 1444 * actually allocates the interrupt via bus_alloc_resource(). 1445 * 1446 * XXX: Should we handle the lookup failing? 1447 */ 1448 if (ACPI_SUCCESS(acpi_lookup_irq_resource(child, *rid, res, &ares))) 1449 acpi_config_intr(child, &ares); 1450 } 1451 #endif 1452 1453 /* 1454 * If this is an allocation of the "default" range for a given 1455 * RID, fetch the exact bounds for this resource from the 1456 * resource list entry to try to allocate the range from the 1457 * system resource regions. 1458 */ 1459 if (res == NULL && isdefault) { 1460 rle = resource_list_find(rl, type, *rid); 1461 if (rle != NULL) { 1462 start = rle->start; 1463 end = rle->end; 1464 count = rle->count; 1465 } 1466 } 1467 } else 1468 res = BUS_ALLOC_RESOURCE(device_get_parent(bus), child, type, rid, 1469 start, end, count, flags); 1470 1471 /* 1472 * If the first attempt failed and this is an allocation of a 1473 * specific range, try to satisfy the request via a suballocation 1474 * from our system resource regions. 1475 */ 1476 if (res == NULL && start + count - 1 == end) 1477 res = acpi_alloc_sysres(child, type, rid, start, end, count, flags); 1478 return (res); 1479 } 1480 1481 /* 1482 * Attempt to allocate a specific resource range from the system 1483 * resource ranges. Note that we only handle memory and I/O port 1484 * system resources. 1485 */ 1486 struct resource * 1487 acpi_alloc_sysres(device_t child, int type, int *rid, rman_res_t start, 1488 rman_res_t end, rman_res_t count, u_int flags) 1489 { 1490 struct rman *rm; 1491 struct resource *res; 1492 1493 switch (type) { 1494 case SYS_RES_IOPORT: 1495 rm = &acpi_rman_io; 1496 break; 1497 case SYS_RES_MEMORY: 1498 rm = &acpi_rman_mem; 1499 break; 1500 default: 1501 return (NULL); 1502 } 1503 1504 KASSERT(start + count - 1 == end, ("wildcard resource range")); 1505 res = rman_reserve_resource(rm, start, end, count, flags & ~RF_ACTIVE, 1506 child); 1507 if (res == NULL) 1508 return (NULL); 1509 1510 rman_set_rid(res, *rid); 1511 1512 /* If requested, activate the resource using the parent's method. */ 1513 if (flags & RF_ACTIVE) 1514 if (bus_activate_resource(child, type, *rid, res) != 0) { 1515 rman_release_resource(res); 1516 return (NULL); 1517 } 1518 1519 return (res); 1520 } 1521 1522 static int 1523 acpi_is_resource_managed(int type, struct resource *r) 1524 { 1525 1526 /* We only handle memory and IO resources through rman. */ 1527 switch (type) { 1528 case SYS_RES_IOPORT: 1529 return (rman_is_region_manager(r, &acpi_rman_io)); 1530 case SYS_RES_MEMORY: 1531 return (rman_is_region_manager(r, &acpi_rman_mem)); 1532 } 1533 return (0); 1534 } 1535 1536 static int 1537 acpi_adjust_resource(device_t bus, device_t child, int type, struct resource *r, 1538 rman_res_t start, rman_res_t end) 1539 { 1540 1541 if (acpi_is_resource_managed(type, r)) 1542 return (rman_adjust_resource(r, start, end)); 1543 return (bus_generic_adjust_resource(bus, child, type, r, start, end)); 1544 } 1545 1546 static int 1547 acpi_release_resource(device_t bus, device_t child, int type, int rid, 1548 struct resource *r) 1549 { 1550 int ret; 1551 1552 /* 1553 * If this resource belongs to one of our internal managers, 1554 * deactivate it and release it to the local pool. 1555 */ 1556 if (acpi_is_resource_managed(type, r)) { 1557 if (rman_get_flags(r) & RF_ACTIVE) { 1558 ret = bus_deactivate_resource(child, type, rid, r); 1559 if (ret != 0) 1560 return (ret); 1561 } 1562 return (rman_release_resource(r)); 1563 } 1564 1565 return (bus_generic_rl_release_resource(bus, child, type, rid, r)); 1566 } 1567 1568 static void 1569 acpi_delete_resource(device_t bus, device_t child, int type, int rid) 1570 { 1571 struct resource_list *rl; 1572 1573 rl = acpi_get_rlist(bus, child); 1574 if (resource_list_busy(rl, type, rid)) { 1575 device_printf(bus, "delete_resource: Resource still owned by child" 1576 " (type=%d, rid=%d)\n", type, rid); 1577 return; 1578 } 1579 resource_list_unreserve(rl, bus, child, type, rid); 1580 resource_list_delete(rl, type, rid); 1581 } 1582 1583 /* Allocate an IO port or memory resource, given its GAS. */ 1584 int 1585 acpi_bus_alloc_gas(device_t dev, int *type, int *rid, ACPI_GENERIC_ADDRESS *gas, 1586 struct resource **res, u_int flags) 1587 { 1588 int error, res_type; 1589 1590 error = ENOMEM; 1591 if (type == NULL || rid == NULL || gas == NULL || res == NULL) 1592 return (EINVAL); 1593 1594 /* We only support memory and IO spaces. */ 1595 switch (gas->SpaceId) { 1596 case ACPI_ADR_SPACE_SYSTEM_MEMORY: 1597 res_type = SYS_RES_MEMORY; 1598 break; 1599 case ACPI_ADR_SPACE_SYSTEM_IO: 1600 res_type = SYS_RES_IOPORT; 1601 break; 1602 default: 1603 return (EOPNOTSUPP); 1604 } 1605 1606 /* 1607 * If the register width is less than 8, assume the BIOS author means 1608 * it is a bit field and just allocate a byte. 1609 */ 1610 if (gas->BitWidth && gas->BitWidth < 8) 1611 gas->BitWidth = 8; 1612 1613 /* Validate the address after we're sure we support the space. */ 1614 if (gas->Address == 0 || gas->BitWidth == 0) 1615 return (EINVAL); 1616 1617 bus_set_resource(dev, res_type, *rid, gas->Address, 1618 gas->BitWidth / 8); 1619 *res = bus_alloc_resource_any(dev, res_type, rid, RF_ACTIVE | flags); 1620 if (*res != NULL) { 1621 *type = res_type; 1622 error = 0; 1623 } else 1624 bus_delete_resource(dev, res_type, *rid); 1625 1626 return (error); 1627 } 1628 1629 /* Probe _HID and _CID for compatible ISA PNP ids. */ 1630 static uint32_t 1631 acpi_isa_get_logicalid(device_t dev) 1632 { 1633 ACPI_DEVICE_INFO *devinfo; 1634 ACPI_HANDLE h; 1635 uint32_t pnpid; 1636 1637 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 1638 1639 /* Fetch and validate the HID. */ 1640 if ((h = acpi_get_handle(dev)) == NULL || 1641 ACPI_FAILURE(AcpiGetObjectInfo(h, &devinfo))) 1642 return_VALUE (0); 1643 1644 pnpid = (devinfo->Valid & ACPI_VALID_HID) != 0 && 1645 devinfo->HardwareId.Length >= ACPI_EISAID_STRING_SIZE ? 1646 PNP_EISAID(devinfo->HardwareId.String) : 0; 1647 AcpiOsFree(devinfo); 1648 1649 return_VALUE (pnpid); 1650 } 1651 1652 static int 1653 acpi_isa_get_compatid(device_t dev, uint32_t *cids, int count) 1654 { 1655 ACPI_DEVICE_INFO *devinfo; 1656 ACPI_PNP_DEVICE_ID *ids; 1657 ACPI_HANDLE h; 1658 uint32_t *pnpid; 1659 int i, valid; 1660 1661 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 1662 1663 pnpid = cids; 1664 1665 /* Fetch and validate the CID */ 1666 if ((h = acpi_get_handle(dev)) == NULL || 1667 ACPI_FAILURE(AcpiGetObjectInfo(h, &devinfo))) 1668 return_VALUE (0); 1669 1670 if ((devinfo->Valid & ACPI_VALID_CID) == 0) { 1671 AcpiOsFree(devinfo); 1672 return_VALUE (0); 1673 } 1674 1675 if (devinfo->CompatibleIdList.Count < count) 1676 count = devinfo->CompatibleIdList.Count; 1677 ids = devinfo->CompatibleIdList.Ids; 1678 for (i = 0, valid = 0; i < count; i++) 1679 if (ids[i].Length >= ACPI_EISAID_STRING_SIZE && 1680 strncmp(ids[i].String, "PNP", 3) == 0) { 1681 *pnpid++ = PNP_EISAID(ids[i].String); 1682 valid++; 1683 } 1684 AcpiOsFree(devinfo); 1685 1686 return_VALUE (valid); 1687 } 1688 1689 static int 1690 acpi_device_id_probe(device_t bus, device_t dev, char **ids, char **match) 1691 { 1692 ACPI_HANDLE h; 1693 ACPI_OBJECT_TYPE t; 1694 int rv; 1695 int i; 1696 1697 h = acpi_get_handle(dev); 1698 if (ids == NULL || h == NULL) 1699 return (ENXIO); 1700 t = acpi_get_type(dev); 1701 if (t != ACPI_TYPE_DEVICE && t != ACPI_TYPE_PROCESSOR) 1702 return (ENXIO); 1703 1704 /* Try to match one of the array of IDs with a HID or CID. */ 1705 for (i = 0; ids[i] != NULL; i++) { 1706 rv = acpi_MatchHid(h, ids[i]); 1707 if (rv == ACPI_MATCHHID_NOMATCH) 1708 continue; 1709 1710 if (match != NULL) { 1711 *match = ids[i]; 1712 } 1713 return ((rv == ACPI_MATCHHID_HID)? 1714 BUS_PROBE_DEFAULT : BUS_PROBE_LOW_PRIORITY); 1715 } 1716 return (ENXIO); 1717 } 1718 1719 static ACPI_STATUS 1720 acpi_device_eval_obj(device_t bus, device_t dev, ACPI_STRING pathname, 1721 ACPI_OBJECT_LIST *parameters, ACPI_BUFFER *ret) 1722 { 1723 ACPI_HANDLE h; 1724 1725 if (dev == NULL) 1726 h = ACPI_ROOT_OBJECT; 1727 else if ((h = acpi_get_handle(dev)) == NULL) 1728 return (AE_BAD_PARAMETER); 1729 return (AcpiEvaluateObject(h, pathname, parameters, ret)); 1730 } 1731 1732 int 1733 acpi_device_pwr_for_sleep(device_t bus, device_t dev, int *dstate) 1734 { 1735 struct acpi_softc *sc; 1736 ACPI_HANDLE handle; 1737 ACPI_STATUS status; 1738 char sxd[8]; 1739 1740 handle = acpi_get_handle(dev); 1741 1742 /* 1743 * XXX If we find these devices, don't try to power them down. 1744 * The serial and IRDA ports on my T23 hang the system when 1745 * set to D3 and it appears that such legacy devices may 1746 * need special handling in their drivers. 1747 */ 1748 if (dstate == NULL || handle == NULL || 1749 acpi_MatchHid(handle, "PNP0500") || 1750 acpi_MatchHid(handle, "PNP0501") || 1751 acpi_MatchHid(handle, "PNP0502") || 1752 acpi_MatchHid(handle, "PNP0510") || 1753 acpi_MatchHid(handle, "PNP0511")) 1754 return (ENXIO); 1755 1756 /* 1757 * Override next state with the value from _SxD, if present. 1758 * Note illegal _S0D is evaluated because some systems expect this. 1759 */ 1760 sc = device_get_softc(bus); 1761 snprintf(sxd, sizeof(sxd), "_S%dD", sc->acpi_sstate); 1762 status = acpi_GetInteger(handle, sxd, dstate); 1763 if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { 1764 device_printf(dev, "failed to get %s on %s: %s\n", sxd, 1765 acpi_name(handle), AcpiFormatException(status)); 1766 return (ENXIO); 1767 } 1768 1769 return (0); 1770 } 1771 1772 /* Callback arg for our implementation of walking the namespace. */ 1773 struct acpi_device_scan_ctx { 1774 acpi_scan_cb_t user_fn; 1775 void *arg; 1776 ACPI_HANDLE parent; 1777 }; 1778 1779 static ACPI_STATUS 1780 acpi_device_scan_cb(ACPI_HANDLE h, UINT32 level, void *arg, void **retval) 1781 { 1782 struct acpi_device_scan_ctx *ctx; 1783 device_t dev, old_dev; 1784 ACPI_STATUS status; 1785 ACPI_OBJECT_TYPE type; 1786 1787 /* 1788 * Skip this device if we think we'll have trouble with it or it is 1789 * the parent where the scan began. 1790 */ 1791 ctx = (struct acpi_device_scan_ctx *)arg; 1792 if (acpi_avoid(h) || h == ctx->parent) 1793 return (AE_OK); 1794 1795 /* If this is not a valid device type (e.g., a method), skip it. */ 1796 if (ACPI_FAILURE(AcpiGetType(h, &type))) 1797 return (AE_OK); 1798 if (type != ACPI_TYPE_DEVICE && type != ACPI_TYPE_PROCESSOR && 1799 type != ACPI_TYPE_THERMAL && type != ACPI_TYPE_POWER) 1800 return (AE_OK); 1801 1802 /* 1803 * Call the user function with the current device. If it is unchanged 1804 * afterwards, return. Otherwise, we update the handle to the new dev. 1805 */ 1806 old_dev = acpi_get_device(h); 1807 dev = old_dev; 1808 status = ctx->user_fn(h, &dev, level, ctx->arg); 1809 if (ACPI_FAILURE(status) || old_dev == dev) 1810 return (status); 1811 1812 /* Remove the old child and its connection to the handle. */ 1813 if (old_dev != NULL) 1814 device_delete_child(device_get_parent(old_dev), old_dev); 1815 1816 /* Recreate the handle association if the user created a device. */ 1817 if (dev != NULL) 1818 AcpiAttachData(h, acpi_fake_objhandler, dev); 1819 1820 return (AE_OK); 1821 } 1822 1823 static ACPI_STATUS 1824 acpi_device_scan_children(device_t bus, device_t dev, int max_depth, 1825 acpi_scan_cb_t user_fn, void *arg) 1826 { 1827 ACPI_HANDLE h; 1828 struct acpi_device_scan_ctx ctx; 1829 1830 if (acpi_disabled("children")) 1831 return (AE_OK); 1832 1833 if (dev == NULL) 1834 h = ACPI_ROOT_OBJECT; 1835 else if ((h = acpi_get_handle(dev)) == NULL) 1836 return (AE_BAD_PARAMETER); 1837 ctx.user_fn = user_fn; 1838 ctx.arg = arg; 1839 ctx.parent = h; 1840 return (AcpiWalkNamespace(ACPI_TYPE_ANY, h, max_depth, 1841 acpi_device_scan_cb, NULL, &ctx, NULL)); 1842 } 1843 1844 /* 1845 * Even though ACPI devices are not PCI, we use the PCI approach for setting 1846 * device power states since it's close enough to ACPI. 1847 */ 1848 int 1849 acpi_set_powerstate(device_t child, int state) 1850 { 1851 ACPI_HANDLE h; 1852 ACPI_STATUS status; 1853 1854 h = acpi_get_handle(child); 1855 if (state < ACPI_STATE_D0 || state > ACPI_D_STATES_MAX) 1856 return (EINVAL); 1857 if (h == NULL) 1858 return (0); 1859 1860 /* Ignore errors if the power methods aren't present. */ 1861 status = acpi_pwr_switch_consumer(h, state); 1862 if (ACPI_SUCCESS(status)) { 1863 if (bootverbose) 1864 device_printf(child, "set ACPI power state D%d on %s\n", 1865 state, acpi_name(h)); 1866 } else if (status != AE_NOT_FOUND) 1867 device_printf(child, 1868 "failed to set ACPI power state D%d on %s: %s\n", state, 1869 acpi_name(h), AcpiFormatException(status)); 1870 1871 return (0); 1872 } 1873 1874 static int 1875 acpi_isa_pnp_probe(device_t bus, device_t child, struct isa_pnp_id *ids) 1876 { 1877 int result, cid_count, i; 1878 uint32_t lid, cids[8]; 1879 1880 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 1881 1882 /* 1883 * ISA-style drivers attached to ACPI may persist and 1884 * probe manually if we return ENOENT. We never want 1885 * that to happen, so don't ever return it. 1886 */ 1887 result = ENXIO; 1888 1889 /* Scan the supplied IDs for a match */ 1890 lid = acpi_isa_get_logicalid(child); 1891 cid_count = acpi_isa_get_compatid(child, cids, 8); 1892 while (ids && ids->ip_id) { 1893 if (lid == ids->ip_id) { 1894 result = 0; 1895 goto out; 1896 } 1897 for (i = 0; i < cid_count; i++) { 1898 if (cids[i] == ids->ip_id) { 1899 result = 0; 1900 goto out; 1901 } 1902 } 1903 ids++; 1904 } 1905 1906 out: 1907 if (result == 0 && ids->ip_desc) 1908 device_set_desc(child, ids->ip_desc); 1909 1910 return_VALUE (result); 1911 } 1912 1913 /* 1914 * Look for a MCFG table. If it is present, use the settings for 1915 * domain (segment) 0 to setup PCI config space access via the memory 1916 * map. 1917 * 1918 * On non-x86 architectures (arm64 for now), this will be done from the 1919 * PCI host bridge driver. 1920 */ 1921 static void 1922 acpi_enable_pcie(void) 1923 { 1924 #if defined(__i386__) || defined(__amd64__) 1925 ACPI_TABLE_HEADER *hdr; 1926 ACPI_MCFG_ALLOCATION *alloc, *end; 1927 ACPI_STATUS status; 1928 1929 status = AcpiGetTable(ACPI_SIG_MCFG, 1, &hdr); 1930 if (ACPI_FAILURE(status)) 1931 return; 1932 1933 end = (ACPI_MCFG_ALLOCATION *)((char *)hdr + hdr->Length); 1934 alloc = (ACPI_MCFG_ALLOCATION *)((ACPI_TABLE_MCFG *)hdr + 1); 1935 while (alloc < end) { 1936 if (alloc->PciSegment == 0) { 1937 pcie_cfgregopen(alloc->Address, alloc->StartBusNumber, 1938 alloc->EndBusNumber); 1939 return; 1940 } 1941 alloc++; 1942 } 1943 #endif 1944 } 1945 1946 /* 1947 * Scan all of the ACPI namespace and attach child devices. 1948 * 1949 * We should only expect to find devices in the \_PR, \_TZ, \_SI, and 1950 * \_SB scopes, and \_PR and \_TZ became obsolete in the ACPI 2.0 spec. 1951 * However, in violation of the spec, some systems place their PCI link 1952 * devices in \, so we have to walk the whole namespace. We check the 1953 * type of namespace nodes, so this should be ok. 1954 */ 1955 static void 1956 acpi_probe_children(device_t bus) 1957 { 1958 1959 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 1960 1961 /* 1962 * Scan the namespace and insert placeholders for all the devices that 1963 * we find. We also probe/attach any early devices. 1964 * 1965 * Note that we use AcpiWalkNamespace rather than AcpiGetDevices because 1966 * we want to create nodes for all devices, not just those that are 1967 * currently present. (This assumes that we don't want to create/remove 1968 * devices as they appear, which might be smarter.) 1969 */ 1970 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "namespace scan\n")); 1971 AcpiWalkNamespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, 100, acpi_probe_child, 1972 NULL, bus, NULL); 1973 1974 /* Pre-allocate resources for our rman from any sysresource devices. */ 1975 acpi_sysres_alloc(bus); 1976 1977 /* Reserve resources already allocated to children. */ 1978 acpi_reserve_resources(bus); 1979 1980 /* Create any static children by calling device identify methods. */ 1981 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "device identify routines\n")); 1982 bus_generic_probe(bus); 1983 1984 /* Probe/attach all children, created statically and from the namespace. */ 1985 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "acpi bus_generic_attach\n")); 1986 bus_generic_attach(bus); 1987 1988 /* Attach wake sysctls. */ 1989 acpi_wake_sysctl_walk(bus); 1990 1991 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "done attaching children\n")); 1992 return_VOID; 1993 } 1994 1995 /* 1996 * Determine the probe order for a given device. 1997 */ 1998 static void 1999 acpi_probe_order(ACPI_HANDLE handle, int *order) 2000 { 2001 ACPI_OBJECT_TYPE type; 2002 2003 /* 2004 * 0. CPUs 2005 * 1. I/O port and memory system resource holders 2006 * 2. Clocks and timers (to handle early accesses) 2007 * 3. Embedded controllers (to handle early accesses) 2008 * 4. PCI Link Devices 2009 */ 2010 AcpiGetType(handle, &type); 2011 if (type == ACPI_TYPE_PROCESSOR) 2012 *order = 0; 2013 else if (acpi_MatchHid(handle, "PNP0C01") || 2014 acpi_MatchHid(handle, "PNP0C02")) 2015 *order = 1; 2016 else if (acpi_MatchHid(handle, "PNP0100") || 2017 acpi_MatchHid(handle, "PNP0103") || 2018 acpi_MatchHid(handle, "PNP0B00")) 2019 *order = 2; 2020 else if (acpi_MatchHid(handle, "PNP0C09")) 2021 *order = 3; 2022 else if (acpi_MatchHid(handle, "PNP0C0F")) 2023 *order = 4; 2024 } 2025 2026 /* 2027 * Evaluate a child device and determine whether we might attach a device to 2028 * it. 2029 */ 2030 static ACPI_STATUS 2031 acpi_probe_child(ACPI_HANDLE handle, UINT32 level, void *context, void **status) 2032 { 2033 ACPI_DEVICE_INFO *devinfo; 2034 struct acpi_device *ad; 2035 struct acpi_prw_data prw; 2036 ACPI_OBJECT_TYPE type; 2037 ACPI_HANDLE h; 2038 device_t bus, child; 2039 char *handle_str; 2040 int order; 2041 2042 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 2043 2044 if (acpi_disabled("children")) 2045 return_ACPI_STATUS (AE_OK); 2046 2047 /* Skip this device if we think we'll have trouble with it. */ 2048 if (acpi_avoid(handle)) 2049 return_ACPI_STATUS (AE_OK); 2050 2051 bus = (device_t)context; 2052 if (ACPI_SUCCESS(AcpiGetType(handle, &type))) { 2053 handle_str = acpi_name(handle); 2054 switch (type) { 2055 case ACPI_TYPE_DEVICE: 2056 /* 2057 * Since we scan from \, be sure to skip system scope objects. 2058 * \_SB_ and \_TZ_ are defined in ACPICA as devices to work around 2059 * BIOS bugs. For example, \_SB_ is to allow \_SB_._INI to be run 2060 * during the initialization and \_TZ_ is to support Notify() on it. 2061 */ 2062 if (strcmp(handle_str, "\\_SB_") == 0 || 2063 strcmp(handle_str, "\\_TZ_") == 0) 2064 break; 2065 if (acpi_parse_prw(handle, &prw) == 0) 2066 AcpiSetupGpeForWake(handle, prw.gpe_handle, prw.gpe_bit); 2067 2068 /* 2069 * Ignore devices that do not have a _HID or _CID. They should 2070 * be discovered by other buses (e.g. the PCI bus driver). 2071 */ 2072 if (!acpi_has_hid(handle)) 2073 break; 2074 /* FALLTHROUGH */ 2075 case ACPI_TYPE_PROCESSOR: 2076 case ACPI_TYPE_THERMAL: 2077 case ACPI_TYPE_POWER: 2078 /* 2079 * Create a placeholder device for this node. Sort the 2080 * placeholder so that the probe/attach passes will run 2081 * breadth-first. Orders less than ACPI_DEV_BASE_ORDER 2082 * are reserved for special objects (i.e., system 2083 * resources). 2084 */ 2085 ACPI_DEBUG_PRINT((ACPI_DB_OBJECTS, "scanning '%s'\n", handle_str)); 2086 order = level * 10 + ACPI_DEV_BASE_ORDER; 2087 acpi_probe_order(handle, &order); 2088 child = BUS_ADD_CHILD(bus, order, NULL, -1); 2089 if (child == NULL) 2090 break; 2091 2092 /* Associate the handle with the device_t and vice versa. */ 2093 acpi_set_handle(child, handle); 2094 AcpiAttachData(handle, acpi_fake_objhandler, child); 2095 2096 /* 2097 * Check that the device is present. If it's not present, 2098 * leave it disabled (so that we have a device_t attached to 2099 * the handle, but we don't probe it). 2100 * 2101 * XXX PCI link devices sometimes report "present" but not 2102 * "functional" (i.e. if disabled). Go ahead and probe them 2103 * anyway since we may enable them later. 2104 */ 2105 if (type == ACPI_TYPE_DEVICE && !acpi_DeviceIsPresent(child)) { 2106 /* Never disable PCI link devices. */ 2107 if (acpi_MatchHid(handle, "PNP0C0F")) 2108 break; 2109 /* 2110 * Docking stations should remain enabled since the system 2111 * may be undocked at boot. 2112 */ 2113 if (ACPI_SUCCESS(AcpiGetHandle(handle, "_DCK", &h))) 2114 break; 2115 2116 device_disable(child); 2117 break; 2118 } 2119 2120 /* 2121 * Get the device's resource settings and attach them. 2122 * Note that if the device has _PRS but no _CRS, we need 2123 * to decide when it's appropriate to try to configure the 2124 * device. Ignore the return value here; it's OK for the 2125 * device not to have any resources. 2126 */ 2127 acpi_parse_resources(child, handle, &acpi_res_parse_set, NULL); 2128 2129 ad = device_get_ivars(child); 2130 ad->ad_cls_class = 0xffffff; 2131 if (ACPI_SUCCESS(AcpiGetObjectInfo(handle, &devinfo))) { 2132 if ((devinfo->Valid & ACPI_VALID_CLS) != 0 && 2133 devinfo->ClassCode.Length >= ACPI_PCICLS_STRING_SIZE) { 2134 ad->ad_cls_class = strtoul(devinfo->ClassCode.String, 2135 NULL, 16); 2136 } 2137 AcpiOsFree(devinfo); 2138 } 2139 break; 2140 } 2141 } 2142 2143 return_ACPI_STATUS (AE_OK); 2144 } 2145 2146 /* 2147 * AcpiAttachData() requires an object handler but never uses it. This is a 2148 * placeholder object handler so we can store a device_t in an ACPI_HANDLE. 2149 */ 2150 void 2151 acpi_fake_objhandler(ACPI_HANDLE h, void *data) 2152 { 2153 } 2154 2155 static void 2156 acpi_shutdown_final(void *arg, int howto) 2157 { 2158 struct acpi_softc *sc = (struct acpi_softc *)arg; 2159 register_t intr; 2160 ACPI_STATUS status; 2161 2162 /* 2163 * XXX Shutdown code should only run on the BSP (cpuid 0). 2164 * Some chipsets do not power off the system correctly if called from 2165 * an AP. 2166 */ 2167 if ((howto & RB_POWEROFF) != 0) { 2168 status = AcpiEnterSleepStatePrep(ACPI_STATE_S5); 2169 if (ACPI_FAILURE(status)) { 2170 device_printf(sc->acpi_dev, "AcpiEnterSleepStatePrep failed - %s\n", 2171 AcpiFormatException(status)); 2172 return; 2173 } 2174 device_printf(sc->acpi_dev, "Powering system off\n"); 2175 intr = intr_disable(); 2176 status = AcpiEnterSleepState(ACPI_STATE_S5); 2177 if (ACPI_FAILURE(status)) { 2178 intr_restore(intr); 2179 device_printf(sc->acpi_dev, "power-off failed - %s\n", 2180 AcpiFormatException(status)); 2181 } else { 2182 DELAY(1000000); 2183 intr_restore(intr); 2184 device_printf(sc->acpi_dev, "power-off failed - timeout\n"); 2185 } 2186 } else if ((howto & RB_HALT) == 0 && sc->acpi_handle_reboot) { 2187 /* Reboot using the reset register. */ 2188 status = AcpiReset(); 2189 if (ACPI_SUCCESS(status)) { 2190 DELAY(1000000); 2191 device_printf(sc->acpi_dev, "reset failed - timeout\n"); 2192 } else if (status != AE_NOT_EXIST) 2193 device_printf(sc->acpi_dev, "reset failed - %s\n", 2194 AcpiFormatException(status)); 2195 } else if (sc->acpi_do_disable && !KERNEL_PANICKED()) { 2196 /* 2197 * Only disable ACPI if the user requested. On some systems, writing 2198 * the disable value to SMI_CMD hangs the system. 2199 */ 2200 device_printf(sc->acpi_dev, "Shutting down\n"); 2201 AcpiTerminate(); 2202 } 2203 } 2204 2205 static void 2206 acpi_enable_fixed_events(struct acpi_softc *sc) 2207 { 2208 static int first_time = 1; 2209 2210 /* Enable and clear fixed events and install handlers. */ 2211 if ((AcpiGbl_FADT.Flags & ACPI_FADT_POWER_BUTTON) == 0) { 2212 AcpiClearEvent(ACPI_EVENT_POWER_BUTTON); 2213 AcpiInstallFixedEventHandler(ACPI_EVENT_POWER_BUTTON, 2214 acpi_event_power_button_sleep, sc); 2215 if (first_time) 2216 device_printf(sc->acpi_dev, "Power Button (fixed)\n"); 2217 } 2218 if ((AcpiGbl_FADT.Flags & ACPI_FADT_SLEEP_BUTTON) == 0) { 2219 AcpiClearEvent(ACPI_EVENT_SLEEP_BUTTON); 2220 AcpiInstallFixedEventHandler(ACPI_EVENT_SLEEP_BUTTON, 2221 acpi_event_sleep_button_sleep, sc); 2222 if (first_time) 2223 device_printf(sc->acpi_dev, "Sleep Button (fixed)\n"); 2224 } 2225 2226 first_time = 0; 2227 } 2228 2229 /* 2230 * Returns true if the device is actually present and should 2231 * be attached to. This requires the present, enabled, UI-visible 2232 * and diagnostics-passed bits to be set. 2233 */ 2234 BOOLEAN 2235 acpi_DeviceIsPresent(device_t dev) 2236 { 2237 ACPI_HANDLE h; 2238 UINT32 s; 2239 ACPI_STATUS status; 2240 2241 h = acpi_get_handle(dev); 2242 if (h == NULL) 2243 return (FALSE); 2244 /* 2245 * Certain Treadripper boards always returns 0 for FreeBSD because it 2246 * only returns non-zero for the OS string "Windows 2015". Otherwise it 2247 * will return zero. Force them to always be treated as present. 2248 * Beata versions were worse: they always returned 0. 2249 */ 2250 if (acpi_MatchHid(h, "AMDI0020") || acpi_MatchHid(h, "AMDI0010")) 2251 return (TRUE); 2252 2253 status = acpi_GetInteger(h, "_STA", &s); 2254 2255 /* 2256 * If no _STA method or if it failed, then assume that 2257 * the device is present. 2258 */ 2259 if (ACPI_FAILURE(status)) 2260 return (TRUE); 2261 2262 return (ACPI_DEVICE_PRESENT(s) ? TRUE : FALSE); 2263 } 2264 2265 /* 2266 * Returns true if the battery is actually present and inserted. 2267 */ 2268 BOOLEAN 2269 acpi_BatteryIsPresent(device_t dev) 2270 { 2271 ACPI_HANDLE h; 2272 UINT32 s; 2273 ACPI_STATUS status; 2274 2275 h = acpi_get_handle(dev); 2276 if (h == NULL) 2277 return (FALSE); 2278 status = acpi_GetInteger(h, "_STA", &s); 2279 2280 /* 2281 * If no _STA method or if it failed, then assume that 2282 * the device is present. 2283 */ 2284 if (ACPI_FAILURE(status)) 2285 return (TRUE); 2286 2287 return (ACPI_BATTERY_PRESENT(s) ? TRUE : FALSE); 2288 } 2289 2290 /* 2291 * Returns true if a device has at least one valid device ID. 2292 */ 2293 BOOLEAN 2294 acpi_has_hid(ACPI_HANDLE h) 2295 { 2296 ACPI_DEVICE_INFO *devinfo; 2297 BOOLEAN ret; 2298 2299 if (h == NULL || 2300 ACPI_FAILURE(AcpiGetObjectInfo(h, &devinfo))) 2301 return (FALSE); 2302 2303 ret = FALSE; 2304 if ((devinfo->Valid & ACPI_VALID_HID) != 0) 2305 ret = TRUE; 2306 else if ((devinfo->Valid & ACPI_VALID_CID) != 0) 2307 if (devinfo->CompatibleIdList.Count > 0) 2308 ret = TRUE; 2309 2310 AcpiOsFree(devinfo); 2311 return (ret); 2312 } 2313 2314 /* 2315 * Match a HID string against a handle 2316 * returns ACPI_MATCHHID_HID if _HID match 2317 * ACPI_MATCHHID_CID if _CID match and not _HID match. 2318 * ACPI_MATCHHID_NOMATCH=0 if no match. 2319 */ 2320 int 2321 acpi_MatchHid(ACPI_HANDLE h, const char *hid) 2322 { 2323 ACPI_DEVICE_INFO *devinfo; 2324 BOOLEAN ret; 2325 int i; 2326 2327 if (hid == NULL || h == NULL || 2328 ACPI_FAILURE(AcpiGetObjectInfo(h, &devinfo))) 2329 return (ACPI_MATCHHID_NOMATCH); 2330 2331 ret = ACPI_MATCHHID_NOMATCH; 2332 if ((devinfo->Valid & ACPI_VALID_HID) != 0 && 2333 strcmp(hid, devinfo->HardwareId.String) == 0) 2334 ret = ACPI_MATCHHID_HID; 2335 else if ((devinfo->Valid & ACPI_VALID_CID) != 0) 2336 for (i = 0; i < devinfo->CompatibleIdList.Count; i++) { 2337 if (strcmp(hid, devinfo->CompatibleIdList.Ids[i].String) == 0) { 2338 ret = ACPI_MATCHHID_CID; 2339 break; 2340 } 2341 } 2342 2343 AcpiOsFree(devinfo); 2344 return (ret); 2345 } 2346 2347 /* 2348 * Return the handle of a named object within our scope, ie. that of (parent) 2349 * or one if its parents. 2350 */ 2351 ACPI_STATUS 2352 acpi_GetHandleInScope(ACPI_HANDLE parent, char *path, ACPI_HANDLE *result) 2353 { 2354 ACPI_HANDLE r; 2355 ACPI_STATUS status; 2356 2357 /* Walk back up the tree to the root */ 2358 for (;;) { 2359 status = AcpiGetHandle(parent, path, &r); 2360 if (ACPI_SUCCESS(status)) { 2361 *result = r; 2362 return (AE_OK); 2363 } 2364 /* XXX Return error here? */ 2365 if (status != AE_NOT_FOUND) 2366 return (AE_OK); 2367 if (ACPI_FAILURE(AcpiGetParent(parent, &r))) 2368 return (AE_NOT_FOUND); 2369 parent = r; 2370 } 2371 } 2372 2373 /* 2374 * Allocate a buffer with a preset data size. 2375 */ 2376 ACPI_BUFFER * 2377 acpi_AllocBuffer(int size) 2378 { 2379 ACPI_BUFFER *buf; 2380 2381 if ((buf = malloc(size + sizeof(*buf), M_ACPIDEV, M_NOWAIT)) == NULL) 2382 return (NULL); 2383 buf->Length = size; 2384 buf->Pointer = (void *)(buf + 1); 2385 return (buf); 2386 } 2387 2388 ACPI_STATUS 2389 acpi_SetInteger(ACPI_HANDLE handle, char *path, UINT32 number) 2390 { 2391 ACPI_OBJECT arg1; 2392 ACPI_OBJECT_LIST args; 2393 2394 arg1.Type = ACPI_TYPE_INTEGER; 2395 arg1.Integer.Value = number; 2396 args.Count = 1; 2397 args.Pointer = &arg1; 2398 2399 return (AcpiEvaluateObject(handle, path, &args, NULL)); 2400 } 2401 2402 /* 2403 * Evaluate a path that should return an integer. 2404 */ 2405 ACPI_STATUS 2406 acpi_GetInteger(ACPI_HANDLE handle, char *path, UINT32 *number) 2407 { 2408 ACPI_STATUS status; 2409 ACPI_BUFFER buf; 2410 ACPI_OBJECT param; 2411 2412 if (handle == NULL) 2413 handle = ACPI_ROOT_OBJECT; 2414 2415 /* 2416 * Assume that what we've been pointed at is an Integer object, or 2417 * a method that will return an Integer. 2418 */ 2419 buf.Pointer = ¶m; 2420 buf.Length = sizeof(param); 2421 status = AcpiEvaluateObject(handle, path, NULL, &buf); 2422 if (ACPI_SUCCESS(status)) { 2423 if (param.Type == ACPI_TYPE_INTEGER) 2424 *number = param.Integer.Value; 2425 else 2426 status = AE_TYPE; 2427 } 2428 2429 /* 2430 * In some applications, a method that's expected to return an Integer 2431 * may instead return a Buffer (probably to simplify some internal 2432 * arithmetic). We'll try to fetch whatever it is, and if it's a Buffer, 2433 * convert it into an Integer as best we can. 2434 * 2435 * This is a hack. 2436 */ 2437 if (status == AE_BUFFER_OVERFLOW) { 2438 if ((buf.Pointer = AcpiOsAllocate(buf.Length)) == NULL) { 2439 status = AE_NO_MEMORY; 2440 } else { 2441 status = AcpiEvaluateObject(handle, path, NULL, &buf); 2442 if (ACPI_SUCCESS(status)) 2443 status = acpi_ConvertBufferToInteger(&buf, number); 2444 AcpiOsFree(buf.Pointer); 2445 } 2446 } 2447 return (status); 2448 } 2449 2450 ACPI_STATUS 2451 acpi_ConvertBufferToInteger(ACPI_BUFFER *bufp, UINT32 *number) 2452 { 2453 ACPI_OBJECT *p; 2454 UINT8 *val; 2455 int i; 2456 2457 p = (ACPI_OBJECT *)bufp->Pointer; 2458 if (p->Type == ACPI_TYPE_INTEGER) { 2459 *number = p->Integer.Value; 2460 return (AE_OK); 2461 } 2462 if (p->Type != ACPI_TYPE_BUFFER) 2463 return (AE_TYPE); 2464 if (p->Buffer.Length > sizeof(int)) 2465 return (AE_BAD_DATA); 2466 2467 *number = 0; 2468 val = p->Buffer.Pointer; 2469 for (i = 0; i < p->Buffer.Length; i++) 2470 *number += val[i] << (i * 8); 2471 return (AE_OK); 2472 } 2473 2474 /* 2475 * Iterate over the elements of an a package object, calling the supplied 2476 * function for each element. 2477 * 2478 * XXX possible enhancement might be to abort traversal on error. 2479 */ 2480 ACPI_STATUS 2481 acpi_ForeachPackageObject(ACPI_OBJECT *pkg, 2482 void (*func)(ACPI_OBJECT *comp, void *arg), void *arg) 2483 { 2484 ACPI_OBJECT *comp; 2485 int i; 2486 2487 if (pkg == NULL || pkg->Type != ACPI_TYPE_PACKAGE) 2488 return (AE_BAD_PARAMETER); 2489 2490 /* Iterate over components */ 2491 i = 0; 2492 comp = pkg->Package.Elements; 2493 for (; i < pkg->Package.Count; i++, comp++) 2494 func(comp, arg); 2495 2496 return (AE_OK); 2497 } 2498 2499 /* 2500 * Find the (index)th resource object in a set. 2501 */ 2502 ACPI_STATUS 2503 acpi_FindIndexedResource(ACPI_BUFFER *buf, int index, ACPI_RESOURCE **resp) 2504 { 2505 ACPI_RESOURCE *rp; 2506 int i; 2507 2508 rp = (ACPI_RESOURCE *)buf->Pointer; 2509 i = index; 2510 while (i-- > 0) { 2511 /* Range check */ 2512 if (rp > (ACPI_RESOURCE *)((u_int8_t *)buf->Pointer + buf->Length)) 2513 return (AE_BAD_PARAMETER); 2514 2515 /* Check for terminator */ 2516 if (rp->Type == ACPI_RESOURCE_TYPE_END_TAG || rp->Length == 0) 2517 return (AE_NOT_FOUND); 2518 rp = ACPI_NEXT_RESOURCE(rp); 2519 } 2520 if (resp != NULL) 2521 *resp = rp; 2522 2523 return (AE_OK); 2524 } 2525 2526 /* 2527 * Append an ACPI_RESOURCE to an ACPI_BUFFER. 2528 * 2529 * Given a pointer to an ACPI_RESOURCE structure, expand the ACPI_BUFFER 2530 * provided to contain it. If the ACPI_BUFFER is empty, allocate a sensible 2531 * backing block. If the ACPI_RESOURCE is NULL, return an empty set of 2532 * resources. 2533 */ 2534 #define ACPI_INITIAL_RESOURCE_BUFFER_SIZE 512 2535 2536 ACPI_STATUS 2537 acpi_AppendBufferResource(ACPI_BUFFER *buf, ACPI_RESOURCE *res) 2538 { 2539 ACPI_RESOURCE *rp; 2540 void *newp; 2541 2542 /* Initialise the buffer if necessary. */ 2543 if (buf->Pointer == NULL) { 2544 buf->Length = ACPI_INITIAL_RESOURCE_BUFFER_SIZE; 2545 if ((buf->Pointer = AcpiOsAllocate(buf->Length)) == NULL) 2546 return (AE_NO_MEMORY); 2547 rp = (ACPI_RESOURCE *)buf->Pointer; 2548 rp->Type = ACPI_RESOURCE_TYPE_END_TAG; 2549 rp->Length = ACPI_RS_SIZE_MIN; 2550 } 2551 if (res == NULL) 2552 return (AE_OK); 2553 2554 /* 2555 * Scan the current buffer looking for the terminator. 2556 * This will either find the terminator or hit the end 2557 * of the buffer and return an error. 2558 */ 2559 rp = (ACPI_RESOURCE *)buf->Pointer; 2560 for (;;) { 2561 /* Range check, don't go outside the buffer */ 2562 if (rp >= (ACPI_RESOURCE *)((u_int8_t *)buf->Pointer + buf->Length)) 2563 return (AE_BAD_PARAMETER); 2564 if (rp->Type == ACPI_RESOURCE_TYPE_END_TAG || rp->Length == 0) 2565 break; 2566 rp = ACPI_NEXT_RESOURCE(rp); 2567 } 2568 2569 /* 2570 * Check the size of the buffer and expand if required. 2571 * 2572 * Required size is: 2573 * size of existing resources before terminator + 2574 * size of new resource and header + 2575 * size of terminator. 2576 * 2577 * Note that this loop should really only run once, unless 2578 * for some reason we are stuffing a *really* huge resource. 2579 */ 2580 while ((((u_int8_t *)rp - (u_int8_t *)buf->Pointer) + 2581 res->Length + ACPI_RS_SIZE_NO_DATA + 2582 ACPI_RS_SIZE_MIN) >= buf->Length) { 2583 if ((newp = AcpiOsAllocate(buf->Length * 2)) == NULL) 2584 return (AE_NO_MEMORY); 2585 bcopy(buf->Pointer, newp, buf->Length); 2586 rp = (ACPI_RESOURCE *)((u_int8_t *)newp + 2587 ((u_int8_t *)rp - (u_int8_t *)buf->Pointer)); 2588 AcpiOsFree(buf->Pointer); 2589 buf->Pointer = newp; 2590 buf->Length += buf->Length; 2591 } 2592 2593 /* Insert the new resource. */ 2594 bcopy(res, rp, res->Length + ACPI_RS_SIZE_NO_DATA); 2595 2596 /* And add the terminator. */ 2597 rp = ACPI_NEXT_RESOURCE(rp); 2598 rp->Type = ACPI_RESOURCE_TYPE_END_TAG; 2599 rp->Length = ACPI_RS_SIZE_MIN; 2600 2601 return (AE_OK); 2602 } 2603 2604 UINT8 2605 acpi_DSMQuery(ACPI_HANDLE h, uint8_t *uuid, int revision) 2606 { 2607 /* 2608 * ACPI spec 9.1.1 defines this. 2609 * 2610 * "Arg2: Function Index Represents a specific function whose meaning is 2611 * specific to the UUID and Revision ID. Function indices should start 2612 * with 1. Function number zero is a query function (see the special 2613 * return code defined below)." 2614 */ 2615 ACPI_BUFFER buf; 2616 ACPI_OBJECT *obj; 2617 UINT8 ret = 0; 2618 2619 if (!ACPI_SUCCESS(acpi_EvaluateDSM(h, uuid, revision, 0, NULL, &buf))) { 2620 ACPI_INFO(("Failed to enumerate DSM functions\n")); 2621 return (0); 2622 } 2623 2624 obj = (ACPI_OBJECT *)buf.Pointer; 2625 KASSERT(obj, ("Object not allowed to be NULL\n")); 2626 2627 /* 2628 * From ACPI 6.2 spec 9.1.1: 2629 * If Function Index = 0, a Buffer containing a function index bitfield. 2630 * Otherwise, the return value and type depends on the UUID and revision 2631 * ID (see below). 2632 */ 2633 switch (obj->Type) { 2634 case ACPI_TYPE_BUFFER: 2635 ret = *(uint8_t *)obj->Buffer.Pointer; 2636 break; 2637 case ACPI_TYPE_INTEGER: 2638 ACPI_BIOS_WARNING((AE_INFO, 2639 "Possibly buggy BIOS with ACPI_TYPE_INTEGER for function enumeration\n")); 2640 ret = obj->Integer.Value & 0xFF; 2641 break; 2642 default: 2643 ACPI_WARNING((AE_INFO, "Unexpected return type %u\n", obj->Type)); 2644 }; 2645 2646 AcpiOsFree(obj); 2647 return ret; 2648 } 2649 2650 /* 2651 * DSM may return multiple types depending on the function. It is therefore 2652 * unsafe to use the typed evaluation. It is highly recommended that the caller 2653 * check the type of the returned object. 2654 */ 2655 ACPI_STATUS 2656 acpi_EvaluateDSM(ACPI_HANDLE handle, uint8_t *uuid, int revision, 2657 uint64_t function, union acpi_object *package, ACPI_BUFFER *out_buf) 2658 { 2659 ACPI_OBJECT arg[4]; 2660 ACPI_OBJECT_LIST arglist; 2661 ACPI_BUFFER buf; 2662 ACPI_STATUS status; 2663 2664 if (out_buf == NULL) 2665 return (AE_NO_MEMORY); 2666 2667 arg[0].Type = ACPI_TYPE_BUFFER; 2668 arg[0].Buffer.Length = ACPI_UUID_LENGTH; 2669 arg[0].Buffer.Pointer = uuid; 2670 arg[1].Type = ACPI_TYPE_INTEGER; 2671 arg[1].Integer.Value = revision; 2672 arg[2].Type = ACPI_TYPE_INTEGER; 2673 arg[2].Integer.Value = function; 2674 if (package) { 2675 arg[3] = *package; 2676 } else { 2677 arg[3].Type = ACPI_TYPE_PACKAGE; 2678 arg[3].Package.Count = 0; 2679 arg[3].Package.Elements = NULL; 2680 } 2681 2682 arglist.Pointer = arg; 2683 arglist.Count = 4; 2684 buf.Pointer = NULL; 2685 buf.Length = ACPI_ALLOCATE_BUFFER; 2686 status = AcpiEvaluateObject(handle, "_DSM", &arglist, &buf); 2687 if (ACPI_FAILURE(status)) 2688 return (status); 2689 2690 KASSERT(ACPI_SUCCESS(status), ("Unexpected status")); 2691 2692 *out_buf = buf; 2693 return (status); 2694 } 2695 2696 ACPI_STATUS 2697 acpi_EvaluateOSC(ACPI_HANDLE handle, uint8_t *uuid, int revision, int count, 2698 uint32_t *caps_in, uint32_t *caps_out, bool query) 2699 { 2700 ACPI_OBJECT arg[4], *ret; 2701 ACPI_OBJECT_LIST arglist; 2702 ACPI_BUFFER buf; 2703 ACPI_STATUS status; 2704 2705 arglist.Pointer = arg; 2706 arglist.Count = 4; 2707 arg[0].Type = ACPI_TYPE_BUFFER; 2708 arg[0].Buffer.Length = ACPI_UUID_LENGTH; 2709 arg[0].Buffer.Pointer = uuid; 2710 arg[1].Type = ACPI_TYPE_INTEGER; 2711 arg[1].Integer.Value = revision; 2712 arg[2].Type = ACPI_TYPE_INTEGER; 2713 arg[2].Integer.Value = count; 2714 arg[3].Type = ACPI_TYPE_BUFFER; 2715 arg[3].Buffer.Length = count * sizeof(*caps_in); 2716 arg[3].Buffer.Pointer = (uint8_t *)caps_in; 2717 caps_in[0] = query ? 1 : 0; 2718 buf.Pointer = NULL; 2719 buf.Length = ACPI_ALLOCATE_BUFFER; 2720 status = AcpiEvaluateObjectTyped(handle, "_OSC", &arglist, &buf, 2721 ACPI_TYPE_BUFFER); 2722 if (ACPI_FAILURE(status)) 2723 return (status); 2724 if (caps_out != NULL) { 2725 ret = buf.Pointer; 2726 if (ret->Buffer.Length != count * sizeof(*caps_out)) { 2727 AcpiOsFree(buf.Pointer); 2728 return (AE_BUFFER_OVERFLOW); 2729 } 2730 bcopy(ret->Buffer.Pointer, caps_out, ret->Buffer.Length); 2731 } 2732 AcpiOsFree(buf.Pointer); 2733 return (status); 2734 } 2735 2736 /* 2737 * Set interrupt model. 2738 */ 2739 ACPI_STATUS 2740 acpi_SetIntrModel(int model) 2741 { 2742 2743 return (acpi_SetInteger(ACPI_ROOT_OBJECT, "_PIC", model)); 2744 } 2745 2746 /* 2747 * Walk subtables of a table and call a callback routine for each 2748 * subtable. The caller should provide the first subtable and a 2749 * pointer to the end of the table. This can be used to walk tables 2750 * such as MADT and SRAT that use subtable entries. 2751 */ 2752 void 2753 acpi_walk_subtables(void *first, void *end, acpi_subtable_handler *handler, 2754 void *arg) 2755 { 2756 ACPI_SUBTABLE_HEADER *entry; 2757 2758 for (entry = first; (void *)entry < end; ) { 2759 /* Avoid an infinite loop if we hit a bogus entry. */ 2760 if (entry->Length < sizeof(ACPI_SUBTABLE_HEADER)) 2761 return; 2762 2763 handler(entry, arg); 2764 entry = ACPI_ADD_PTR(ACPI_SUBTABLE_HEADER, entry, entry->Length); 2765 } 2766 } 2767 2768 /* 2769 * DEPRECATED. This interface has serious deficiencies and will be 2770 * removed. 2771 * 2772 * Immediately enter the sleep state. In the old model, acpiconf(8) ran 2773 * rc.suspend and rc.resume so we don't have to notify devd(8) to do this. 2774 */ 2775 ACPI_STATUS 2776 acpi_SetSleepState(struct acpi_softc *sc, int state) 2777 { 2778 static int once; 2779 2780 if (!once) { 2781 device_printf(sc->acpi_dev, 2782 "warning: acpi_SetSleepState() deprecated, need to update your software\n"); 2783 once = 1; 2784 } 2785 return (acpi_EnterSleepState(sc, state)); 2786 } 2787 2788 #if defined(__amd64__) || defined(__i386__) 2789 static void 2790 acpi_sleep_force_task(void *context) 2791 { 2792 struct acpi_softc *sc = (struct acpi_softc *)context; 2793 2794 if (ACPI_FAILURE(acpi_EnterSleepState(sc, sc->acpi_next_sstate))) 2795 device_printf(sc->acpi_dev, "force sleep state S%d failed\n", 2796 sc->acpi_next_sstate); 2797 } 2798 2799 static void 2800 acpi_sleep_force(void *arg) 2801 { 2802 struct acpi_softc *sc = (struct acpi_softc *)arg; 2803 2804 device_printf(sc->acpi_dev, 2805 "suspend request timed out, forcing sleep now\n"); 2806 /* 2807 * XXX Suspending from callout causes freezes in DEVICE_SUSPEND(). 2808 * Suspend from acpi_task thread instead. 2809 */ 2810 if (ACPI_FAILURE(AcpiOsExecute(OSL_NOTIFY_HANDLER, 2811 acpi_sleep_force_task, sc))) 2812 device_printf(sc->acpi_dev, "AcpiOsExecute() for sleeping failed\n"); 2813 } 2814 #endif 2815 2816 /* 2817 * Request that the system enter the given suspend state. All /dev/apm 2818 * devices and devd(8) will be notified. Userland then has a chance to 2819 * save state and acknowledge the request. The system sleeps once all 2820 * acks are in. 2821 */ 2822 int 2823 acpi_ReqSleepState(struct acpi_softc *sc, int state) 2824 { 2825 #if defined(__amd64__) || defined(__i386__) 2826 struct apm_clone_data *clone; 2827 ACPI_STATUS status; 2828 2829 if (state < ACPI_STATE_S1 || state > ACPI_S_STATES_MAX) 2830 return (EINVAL); 2831 if (!acpi_sleep_states[state]) 2832 return (EOPNOTSUPP); 2833 2834 /* 2835 * If a reboot/shutdown/suspend request is already in progress or 2836 * suspend is blocked due to an upcoming shutdown, just return. 2837 */ 2838 if (rebooting || sc->acpi_next_sstate != 0 || suspend_blocked) { 2839 return (0); 2840 } 2841 2842 /* Wait until sleep is enabled. */ 2843 while (sc->acpi_sleep_disabled) { 2844 AcpiOsSleep(1000); 2845 } 2846 2847 ACPI_LOCK(acpi); 2848 2849 sc->acpi_next_sstate = state; 2850 2851 /* S5 (soft-off) should be entered directly with no waiting. */ 2852 if (state == ACPI_STATE_S5) { 2853 ACPI_UNLOCK(acpi); 2854 status = acpi_EnterSleepState(sc, state); 2855 return (ACPI_SUCCESS(status) ? 0 : ENXIO); 2856 } 2857 2858 /* Record the pending state and notify all apm devices. */ 2859 STAILQ_FOREACH(clone, &sc->apm_cdevs, entries) { 2860 clone->notify_status = APM_EV_NONE; 2861 if ((clone->flags & ACPI_EVF_DEVD) == 0) { 2862 selwakeuppri(&clone->sel_read, PZERO); 2863 KNOTE_LOCKED(&clone->sel_read.si_note, 0); 2864 } 2865 } 2866 2867 /* If devd(8) is not running, immediately enter the sleep state. */ 2868 if (!devctl_process_running()) { 2869 ACPI_UNLOCK(acpi); 2870 status = acpi_EnterSleepState(sc, state); 2871 return (ACPI_SUCCESS(status) ? 0 : ENXIO); 2872 } 2873 2874 /* 2875 * Set a timeout to fire if userland doesn't ack the suspend request 2876 * in time. This way we still eventually go to sleep if we were 2877 * overheating or running low on battery, even if userland is hung. 2878 * We cancel this timeout once all userland acks are in or the 2879 * suspend request is aborted. 2880 */ 2881 callout_reset(&sc->susp_force_to, 10 * hz, acpi_sleep_force, sc); 2882 ACPI_UNLOCK(acpi); 2883 2884 /* Now notify devd(8) also. */ 2885 acpi_UserNotify("Suspend", ACPI_ROOT_OBJECT, state); 2886 2887 return (0); 2888 #else 2889 /* This platform does not support acpi suspend/resume. */ 2890 return (EOPNOTSUPP); 2891 #endif 2892 } 2893 2894 /* 2895 * Acknowledge (or reject) a pending sleep state. The caller has 2896 * prepared for suspend and is now ready for it to proceed. If the 2897 * error argument is non-zero, it indicates suspend should be cancelled 2898 * and gives an errno value describing why. Once all votes are in, 2899 * we suspend the system. 2900 */ 2901 int 2902 acpi_AckSleepState(struct apm_clone_data *clone, int error) 2903 { 2904 #if defined(__amd64__) || defined(__i386__) 2905 struct acpi_softc *sc; 2906 int ret, sleeping; 2907 2908 /* If no pending sleep state, return an error. */ 2909 ACPI_LOCK(acpi); 2910 sc = clone->acpi_sc; 2911 if (sc->acpi_next_sstate == 0) { 2912 ACPI_UNLOCK(acpi); 2913 return (ENXIO); 2914 } 2915 2916 /* Caller wants to abort suspend process. */ 2917 if (error) { 2918 sc->acpi_next_sstate = 0; 2919 callout_stop(&sc->susp_force_to); 2920 device_printf(sc->acpi_dev, 2921 "listener on %s cancelled the pending suspend\n", 2922 devtoname(clone->cdev)); 2923 ACPI_UNLOCK(acpi); 2924 return (0); 2925 } 2926 2927 /* 2928 * Mark this device as acking the suspend request. Then, walk through 2929 * all devices, seeing if they agree yet. We only count devices that 2930 * are writable since read-only devices couldn't ack the request. 2931 */ 2932 sleeping = TRUE; 2933 clone->notify_status = APM_EV_ACKED; 2934 STAILQ_FOREACH(clone, &sc->apm_cdevs, entries) { 2935 if ((clone->flags & ACPI_EVF_WRITE) != 0 && 2936 clone->notify_status != APM_EV_ACKED) { 2937 sleeping = FALSE; 2938 break; 2939 } 2940 } 2941 2942 /* If all devices have voted "yes", we will suspend now. */ 2943 if (sleeping) 2944 callout_stop(&sc->susp_force_to); 2945 ACPI_UNLOCK(acpi); 2946 ret = 0; 2947 if (sleeping) { 2948 if (ACPI_FAILURE(acpi_EnterSleepState(sc, sc->acpi_next_sstate))) 2949 ret = ENODEV; 2950 } 2951 return (ret); 2952 #else 2953 /* This platform does not support acpi suspend/resume. */ 2954 return (EOPNOTSUPP); 2955 #endif 2956 } 2957 2958 static void 2959 acpi_sleep_enable(void *arg) 2960 { 2961 struct acpi_softc *sc = (struct acpi_softc *)arg; 2962 2963 ACPI_LOCK_ASSERT(acpi); 2964 2965 /* Reschedule if the system is not fully up and running. */ 2966 if (!AcpiGbl_SystemAwakeAndRunning) { 2967 callout_schedule(&acpi_sleep_timer, hz * ACPI_MINIMUM_AWAKETIME); 2968 return; 2969 } 2970 2971 sc->acpi_sleep_disabled = FALSE; 2972 } 2973 2974 static ACPI_STATUS 2975 acpi_sleep_disable(struct acpi_softc *sc) 2976 { 2977 ACPI_STATUS status; 2978 2979 /* Fail if the system is not fully up and running. */ 2980 if (!AcpiGbl_SystemAwakeAndRunning) 2981 return (AE_ERROR); 2982 2983 ACPI_LOCK(acpi); 2984 status = sc->acpi_sleep_disabled ? AE_ERROR : AE_OK; 2985 sc->acpi_sleep_disabled = TRUE; 2986 ACPI_UNLOCK(acpi); 2987 2988 return (status); 2989 } 2990 2991 enum acpi_sleep_state { 2992 ACPI_SS_NONE, 2993 ACPI_SS_GPE_SET, 2994 ACPI_SS_DEV_SUSPEND, 2995 ACPI_SS_SLP_PREP, 2996 ACPI_SS_SLEPT, 2997 }; 2998 2999 /* 3000 * Enter the desired system sleep state. 3001 * 3002 * Currently we support S1-S5 but S4 is only S4BIOS 3003 */ 3004 static ACPI_STATUS 3005 acpi_EnterSleepState(struct acpi_softc *sc, int state) 3006 { 3007 register_t intr; 3008 ACPI_STATUS status; 3009 ACPI_EVENT_STATUS power_button_status; 3010 enum acpi_sleep_state slp_state; 3011 int sleep_result; 3012 3013 ACPI_FUNCTION_TRACE_U32((char *)(uintptr_t)__func__, state); 3014 3015 if (state < ACPI_STATE_S1 || state > ACPI_S_STATES_MAX) 3016 return_ACPI_STATUS (AE_BAD_PARAMETER); 3017 if (!acpi_sleep_states[state]) { 3018 device_printf(sc->acpi_dev, "Sleep state S%d not supported by BIOS\n", 3019 state); 3020 return (AE_SUPPORT); 3021 } 3022 3023 /* Re-entry once we're suspending is not allowed. */ 3024 status = acpi_sleep_disable(sc); 3025 if (ACPI_FAILURE(status)) { 3026 device_printf(sc->acpi_dev, 3027 "suspend request ignored (not ready yet)\n"); 3028 return (status); 3029 } 3030 3031 if (state == ACPI_STATE_S5) { 3032 /* 3033 * Shut down cleanly and power off. This will call us back through the 3034 * shutdown handlers. 3035 */ 3036 shutdown_nice(RB_POWEROFF); 3037 return_ACPI_STATUS (AE_OK); 3038 } 3039 3040 EVENTHANDLER_INVOKE(power_suspend_early); 3041 stop_all_proc(); 3042 EVENTHANDLER_INVOKE(power_suspend); 3043 3044 #ifdef EARLY_AP_STARTUP 3045 MPASS(mp_ncpus == 1 || smp_started); 3046 thread_lock(curthread); 3047 sched_bind(curthread, 0); 3048 thread_unlock(curthread); 3049 #else 3050 if (smp_started) { 3051 thread_lock(curthread); 3052 sched_bind(curthread, 0); 3053 thread_unlock(curthread); 3054 } 3055 #endif 3056 3057 /* 3058 * Be sure to hold Giant across DEVICE_SUSPEND/RESUME since non-MPSAFE 3059 * drivers need this. 3060 */ 3061 mtx_lock(&Giant); 3062 3063 slp_state = ACPI_SS_NONE; 3064 3065 sc->acpi_sstate = state; 3066 3067 /* Enable any GPEs as appropriate and requested by the user. */ 3068 acpi_wake_prep_walk(state); 3069 slp_state = ACPI_SS_GPE_SET; 3070 3071 /* 3072 * Inform all devices that we are going to sleep. If at least one 3073 * device fails, DEVICE_SUSPEND() automatically resumes the tree. 3074 * 3075 * XXX Note that a better two-pass approach with a 'veto' pass 3076 * followed by a "real thing" pass would be better, but the current 3077 * bus interface does not provide for this. 3078 */ 3079 if (DEVICE_SUSPEND(root_bus) != 0) { 3080 device_printf(sc->acpi_dev, "device_suspend failed\n"); 3081 goto backout; 3082 } 3083 slp_state = ACPI_SS_DEV_SUSPEND; 3084 3085 status = AcpiEnterSleepStatePrep(state); 3086 if (ACPI_FAILURE(status)) { 3087 device_printf(sc->acpi_dev, "AcpiEnterSleepStatePrep failed - %s\n", 3088 AcpiFormatException(status)); 3089 goto backout; 3090 } 3091 slp_state = ACPI_SS_SLP_PREP; 3092 3093 if (sc->acpi_sleep_delay > 0) 3094 DELAY(sc->acpi_sleep_delay * 1000000); 3095 3096 suspendclock(); 3097 intr = intr_disable(); 3098 if (state != ACPI_STATE_S1) { 3099 sleep_result = acpi_sleep_machdep(sc, state); 3100 acpi_wakeup_machdep(sc, state, sleep_result, 0); 3101 3102 /* 3103 * XXX According to ACPI specification SCI_EN bit should be restored 3104 * by ACPI platform (BIOS, firmware) to its pre-sleep state. 3105 * Unfortunately some BIOSes fail to do that and that leads to 3106 * unexpected and serious consequences during wake up like a system 3107 * getting stuck in SMI handlers. 3108 * This hack is picked up from Linux, which claims that it follows 3109 * Windows behavior. 3110 */ 3111 if (sleep_result == 1 && state != ACPI_STATE_S4) 3112 AcpiWriteBitRegister(ACPI_BITREG_SCI_ENABLE, ACPI_ENABLE_EVENT); 3113 3114 if (sleep_result == 1 && state == ACPI_STATE_S3) { 3115 /* 3116 * Prevent mis-interpretation of the wakeup by power button 3117 * as a request for power off. 3118 * Ideally we should post an appropriate wakeup event, 3119 * perhaps using acpi_event_power_button_wake or alike. 3120 * 3121 * Clearing of power button status after wakeup is mandated 3122 * by ACPI specification in section "Fixed Power Button". 3123 * 3124 * XXX As of ACPICA 20121114 AcpiGetEventStatus provides 3125 * status as 0/1 corressponding to inactive/active despite 3126 * its type being ACPI_EVENT_STATUS. In other words, 3127 * we should not test for ACPI_EVENT_FLAG_SET for time being. 3128 */ 3129 if (ACPI_SUCCESS(AcpiGetEventStatus(ACPI_EVENT_POWER_BUTTON, 3130 &power_button_status)) && power_button_status != 0) { 3131 AcpiClearEvent(ACPI_EVENT_POWER_BUTTON); 3132 device_printf(sc->acpi_dev, 3133 "cleared fixed power button status\n"); 3134 } 3135 } 3136 3137 intr_restore(intr); 3138 3139 /* call acpi_wakeup_machdep() again with interrupt enabled */ 3140 acpi_wakeup_machdep(sc, state, sleep_result, 1); 3141 3142 AcpiLeaveSleepStatePrep(state); 3143 3144 if (sleep_result == -1) 3145 goto backout; 3146 3147 /* Re-enable ACPI hardware on wakeup from sleep state 4. */ 3148 if (state == ACPI_STATE_S4) 3149 AcpiEnable(); 3150 } else { 3151 status = AcpiEnterSleepState(state); 3152 intr_restore(intr); 3153 AcpiLeaveSleepStatePrep(state); 3154 if (ACPI_FAILURE(status)) { 3155 device_printf(sc->acpi_dev, "AcpiEnterSleepState failed - %s\n", 3156 AcpiFormatException(status)); 3157 goto backout; 3158 } 3159 } 3160 slp_state = ACPI_SS_SLEPT; 3161 3162 /* 3163 * Back out state according to how far along we got in the suspend 3164 * process. This handles both the error and success cases. 3165 */ 3166 backout: 3167 if (slp_state >= ACPI_SS_SLP_PREP) 3168 resumeclock(); 3169 if (slp_state >= ACPI_SS_GPE_SET) { 3170 acpi_wake_prep_walk(state); 3171 sc->acpi_sstate = ACPI_STATE_S0; 3172 } 3173 if (slp_state >= ACPI_SS_DEV_SUSPEND) 3174 DEVICE_RESUME(root_bus); 3175 if (slp_state >= ACPI_SS_SLP_PREP) 3176 AcpiLeaveSleepState(state); 3177 if (slp_state >= ACPI_SS_SLEPT) { 3178 #if defined(__i386__) || defined(__amd64__) 3179 /* NB: we are still using ACPI timecounter at this point. */ 3180 resume_TSC(); 3181 #endif 3182 acpi_resync_clock(sc); 3183 acpi_enable_fixed_events(sc); 3184 } 3185 sc->acpi_next_sstate = 0; 3186 3187 mtx_unlock(&Giant); 3188 3189 #ifdef EARLY_AP_STARTUP 3190 thread_lock(curthread); 3191 sched_unbind(curthread); 3192 thread_unlock(curthread); 3193 #else 3194 if (smp_started) { 3195 thread_lock(curthread); 3196 sched_unbind(curthread); 3197 thread_unlock(curthread); 3198 } 3199 #endif 3200 3201 resume_all_proc(); 3202 3203 EVENTHANDLER_INVOKE(power_resume); 3204 3205 /* Allow another sleep request after a while. */ 3206 callout_schedule(&acpi_sleep_timer, hz * ACPI_MINIMUM_AWAKETIME); 3207 3208 /* Run /etc/rc.resume after we are back. */ 3209 if (devctl_process_running()) 3210 acpi_UserNotify("Resume", ACPI_ROOT_OBJECT, state); 3211 3212 return_ACPI_STATUS (status); 3213 } 3214 3215 static void 3216 acpi_resync_clock(struct acpi_softc *sc) 3217 { 3218 3219 /* 3220 * Warm up timecounter again and reset system clock. 3221 */ 3222 (void)timecounter->tc_get_timecount(timecounter); 3223 inittodr(time_second + sc->acpi_sleep_delay); 3224 } 3225 3226 /* Enable or disable the device's wake GPE. */ 3227 int 3228 acpi_wake_set_enable(device_t dev, int enable) 3229 { 3230 struct acpi_prw_data prw; 3231 ACPI_STATUS status; 3232 int flags; 3233 3234 /* Make sure the device supports waking the system and get the GPE. */ 3235 if (acpi_parse_prw(acpi_get_handle(dev), &prw) != 0) 3236 return (ENXIO); 3237 3238 flags = acpi_get_flags(dev); 3239 if (enable) { 3240 status = AcpiSetGpeWakeMask(prw.gpe_handle, prw.gpe_bit, 3241 ACPI_GPE_ENABLE); 3242 if (ACPI_FAILURE(status)) { 3243 device_printf(dev, "enable wake failed\n"); 3244 return (ENXIO); 3245 } 3246 acpi_set_flags(dev, flags | ACPI_FLAG_WAKE_ENABLED); 3247 } else { 3248 status = AcpiSetGpeWakeMask(prw.gpe_handle, prw.gpe_bit, 3249 ACPI_GPE_DISABLE); 3250 if (ACPI_FAILURE(status)) { 3251 device_printf(dev, "disable wake failed\n"); 3252 return (ENXIO); 3253 } 3254 acpi_set_flags(dev, flags & ~ACPI_FLAG_WAKE_ENABLED); 3255 } 3256 3257 return (0); 3258 } 3259 3260 static int 3261 acpi_wake_sleep_prep(ACPI_HANDLE handle, int sstate) 3262 { 3263 struct acpi_prw_data prw; 3264 device_t dev; 3265 3266 /* Check that this is a wake-capable device and get its GPE. */ 3267 if (acpi_parse_prw(handle, &prw) != 0) 3268 return (ENXIO); 3269 dev = acpi_get_device(handle); 3270 3271 /* 3272 * The destination sleep state must be less than (i.e., higher power) 3273 * or equal to the value specified by _PRW. If this GPE cannot be 3274 * enabled for the next sleep state, then disable it. If it can and 3275 * the user requested it be enabled, turn on any required power resources 3276 * and set _PSW. 3277 */ 3278 if (sstate > prw.lowest_wake) { 3279 AcpiSetGpeWakeMask(prw.gpe_handle, prw.gpe_bit, ACPI_GPE_DISABLE); 3280 if (bootverbose) 3281 device_printf(dev, "wake_prep disabled wake for %s (S%d)\n", 3282 acpi_name(handle), sstate); 3283 } else if (dev && (acpi_get_flags(dev) & ACPI_FLAG_WAKE_ENABLED) != 0) { 3284 acpi_pwr_wake_enable(handle, 1); 3285 acpi_SetInteger(handle, "_PSW", 1); 3286 if (bootverbose) 3287 device_printf(dev, "wake_prep enabled for %s (S%d)\n", 3288 acpi_name(handle), sstate); 3289 } 3290 3291 return (0); 3292 } 3293 3294 static int 3295 acpi_wake_run_prep(ACPI_HANDLE handle, int sstate) 3296 { 3297 struct acpi_prw_data prw; 3298 device_t dev; 3299 3300 /* 3301 * Check that this is a wake-capable device and get its GPE. Return 3302 * now if the user didn't enable this device for wake. 3303 */ 3304 if (acpi_parse_prw(handle, &prw) != 0) 3305 return (ENXIO); 3306 dev = acpi_get_device(handle); 3307 if (dev == NULL || (acpi_get_flags(dev) & ACPI_FLAG_WAKE_ENABLED) == 0) 3308 return (0); 3309 3310 /* 3311 * If this GPE couldn't be enabled for the previous sleep state, it was 3312 * disabled before going to sleep so re-enable it. If it was enabled, 3313 * clear _PSW and turn off any power resources it used. 3314 */ 3315 if (sstate > prw.lowest_wake) { 3316 AcpiSetGpeWakeMask(prw.gpe_handle, prw.gpe_bit, ACPI_GPE_ENABLE); 3317 if (bootverbose) 3318 device_printf(dev, "run_prep re-enabled %s\n", acpi_name(handle)); 3319 } else { 3320 acpi_SetInteger(handle, "_PSW", 0); 3321 acpi_pwr_wake_enable(handle, 0); 3322 if (bootverbose) 3323 device_printf(dev, "run_prep cleaned up for %s\n", 3324 acpi_name(handle)); 3325 } 3326 3327 return (0); 3328 } 3329 3330 static ACPI_STATUS 3331 acpi_wake_prep(ACPI_HANDLE handle, UINT32 level, void *context, void **status) 3332 { 3333 int sstate; 3334 3335 /* If suspending, run the sleep prep function, otherwise wake. */ 3336 sstate = *(int *)context; 3337 if (AcpiGbl_SystemAwakeAndRunning) 3338 acpi_wake_sleep_prep(handle, sstate); 3339 else 3340 acpi_wake_run_prep(handle, sstate); 3341 return (AE_OK); 3342 } 3343 3344 /* Walk the tree rooted at acpi0 to prep devices for suspend/resume. */ 3345 static int 3346 acpi_wake_prep_walk(int sstate) 3347 { 3348 ACPI_HANDLE sb_handle; 3349 3350 if (ACPI_SUCCESS(AcpiGetHandle(ACPI_ROOT_OBJECT, "\\_SB_", &sb_handle))) 3351 AcpiWalkNamespace(ACPI_TYPE_DEVICE, sb_handle, 100, 3352 acpi_wake_prep, NULL, &sstate, NULL); 3353 return (0); 3354 } 3355 3356 /* Walk the tree rooted at acpi0 to attach per-device wake sysctls. */ 3357 static int 3358 acpi_wake_sysctl_walk(device_t dev) 3359 { 3360 int error, i, numdevs; 3361 device_t *devlist; 3362 device_t child; 3363 ACPI_STATUS status; 3364 3365 error = device_get_children(dev, &devlist, &numdevs); 3366 if (error != 0 || numdevs == 0) { 3367 if (numdevs == 0) 3368 free(devlist, M_TEMP); 3369 return (error); 3370 } 3371 for (i = 0; i < numdevs; i++) { 3372 child = devlist[i]; 3373 acpi_wake_sysctl_walk(child); 3374 if (!device_is_attached(child)) 3375 continue; 3376 status = AcpiEvaluateObject(acpi_get_handle(child), "_PRW", NULL, NULL); 3377 if (ACPI_SUCCESS(status)) { 3378 SYSCTL_ADD_PROC(device_get_sysctl_ctx(child), 3379 SYSCTL_CHILDREN(device_get_sysctl_tree(child)), OID_AUTO, 3380 "wake", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_NEEDGIANT, child, 0, 3381 acpi_wake_set_sysctl, "I", "Device set to wake the system"); 3382 } 3383 } 3384 free(devlist, M_TEMP); 3385 3386 return (0); 3387 } 3388 3389 /* Enable or disable wake from userland. */ 3390 static int 3391 acpi_wake_set_sysctl(SYSCTL_HANDLER_ARGS) 3392 { 3393 int enable, error; 3394 device_t dev; 3395 3396 dev = (device_t)arg1; 3397 enable = (acpi_get_flags(dev) & ACPI_FLAG_WAKE_ENABLED) ? 1 : 0; 3398 3399 error = sysctl_handle_int(oidp, &enable, 0, req); 3400 if (error != 0 || req->newptr == NULL) 3401 return (error); 3402 if (enable != 0 && enable != 1) 3403 return (EINVAL); 3404 3405 return (acpi_wake_set_enable(dev, enable)); 3406 } 3407 3408 /* Parse a device's _PRW into a structure. */ 3409 int 3410 acpi_parse_prw(ACPI_HANDLE h, struct acpi_prw_data *prw) 3411 { 3412 ACPI_STATUS status; 3413 ACPI_BUFFER prw_buffer; 3414 ACPI_OBJECT *res, *res2; 3415 int error, i, power_count; 3416 3417 if (h == NULL || prw == NULL) 3418 return (EINVAL); 3419 3420 /* 3421 * The _PRW object (7.2.9) is only required for devices that have the 3422 * ability to wake the system from a sleeping state. 3423 */ 3424 error = EINVAL; 3425 prw_buffer.Pointer = NULL; 3426 prw_buffer.Length = ACPI_ALLOCATE_BUFFER; 3427 status = AcpiEvaluateObject(h, "_PRW", NULL, &prw_buffer); 3428 if (ACPI_FAILURE(status)) 3429 return (ENOENT); 3430 res = (ACPI_OBJECT *)prw_buffer.Pointer; 3431 if (res == NULL) 3432 return (ENOENT); 3433 if (!ACPI_PKG_VALID(res, 2)) 3434 goto out; 3435 3436 /* 3437 * Element 1 of the _PRW object: 3438 * The lowest power system sleeping state that can be entered while still 3439 * providing wake functionality. The sleeping state being entered must 3440 * be less than (i.e., higher power) or equal to this value. 3441 */ 3442 if (acpi_PkgInt32(res, 1, &prw->lowest_wake) != 0) 3443 goto out; 3444 3445 /* 3446 * Element 0 of the _PRW object: 3447 */ 3448 switch (res->Package.Elements[0].Type) { 3449 case ACPI_TYPE_INTEGER: 3450 /* 3451 * If the data type of this package element is numeric, then this 3452 * _PRW package element is the bit index in the GPEx_EN, in the 3453 * GPE blocks described in the FADT, of the enable bit that is 3454 * enabled for the wake event. 3455 */ 3456 prw->gpe_handle = NULL; 3457 prw->gpe_bit = res->Package.Elements[0].Integer.Value; 3458 error = 0; 3459 break; 3460 case ACPI_TYPE_PACKAGE: 3461 /* 3462 * If the data type of this package element is a package, then this 3463 * _PRW package element is itself a package containing two 3464 * elements. The first is an object reference to the GPE Block 3465 * device that contains the GPE that will be triggered by the wake 3466 * event. The second element is numeric and it contains the bit 3467 * index in the GPEx_EN, in the GPE Block referenced by the 3468 * first element in the package, of the enable bit that is enabled for 3469 * the wake event. 3470 * 3471 * For example, if this field is a package then it is of the form: 3472 * Package() {\_SB.PCI0.ISA.GPE, 2} 3473 */ 3474 res2 = &res->Package.Elements[0]; 3475 if (!ACPI_PKG_VALID(res2, 2)) 3476 goto out; 3477 prw->gpe_handle = acpi_GetReference(NULL, &res2->Package.Elements[0]); 3478 if (prw->gpe_handle == NULL) 3479 goto out; 3480 if (acpi_PkgInt32(res2, 1, &prw->gpe_bit) != 0) 3481 goto out; 3482 error = 0; 3483 break; 3484 default: 3485 goto out; 3486 } 3487 3488 /* Elements 2 to N of the _PRW object are power resources. */ 3489 power_count = res->Package.Count - 2; 3490 if (power_count > ACPI_PRW_MAX_POWERRES) { 3491 printf("ACPI device %s has too many power resources\n", acpi_name(h)); 3492 power_count = 0; 3493 } 3494 prw->power_res_count = power_count; 3495 for (i = 0; i < power_count; i++) 3496 prw->power_res[i] = res->Package.Elements[i]; 3497 3498 out: 3499 if (prw_buffer.Pointer != NULL) 3500 AcpiOsFree(prw_buffer.Pointer); 3501 return (error); 3502 } 3503 3504 /* 3505 * ACPI Event Handlers 3506 */ 3507 3508 /* System Event Handlers (registered by EVENTHANDLER_REGISTER) */ 3509 3510 static void 3511 acpi_system_eventhandler_sleep(void *arg, int state) 3512 { 3513 struct acpi_softc *sc = (struct acpi_softc *)arg; 3514 int ret; 3515 3516 ACPI_FUNCTION_TRACE_U32((char *)(uintptr_t)__func__, state); 3517 3518 /* Check if button action is disabled or unknown. */ 3519 if (state == ACPI_STATE_UNKNOWN) 3520 return; 3521 3522 /* Request that the system prepare to enter the given suspend state. */ 3523 ret = acpi_ReqSleepState(sc, state); 3524 if (ret != 0) 3525 device_printf(sc->acpi_dev, 3526 "request to enter state S%d failed (err %d)\n", state, ret); 3527 3528 return_VOID; 3529 } 3530 3531 static void 3532 acpi_system_eventhandler_wakeup(void *arg, int state) 3533 { 3534 3535 ACPI_FUNCTION_TRACE_U32((char *)(uintptr_t)__func__, state); 3536 3537 /* Currently, nothing to do for wakeup. */ 3538 3539 return_VOID; 3540 } 3541 3542 /* 3543 * ACPICA Event Handlers (FixedEvent, also called from button notify handler) 3544 */ 3545 static void 3546 acpi_invoke_sleep_eventhandler(void *context) 3547 { 3548 3549 EVENTHANDLER_INVOKE(acpi_sleep_event, *(int *)context); 3550 } 3551 3552 static void 3553 acpi_invoke_wake_eventhandler(void *context) 3554 { 3555 3556 EVENTHANDLER_INVOKE(acpi_wakeup_event, *(int *)context); 3557 } 3558 3559 UINT32 3560 acpi_event_power_button_sleep(void *context) 3561 { 3562 struct acpi_softc *sc = (struct acpi_softc *)context; 3563 3564 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 3565 3566 if (ACPI_FAILURE(AcpiOsExecute(OSL_NOTIFY_HANDLER, 3567 acpi_invoke_sleep_eventhandler, &sc->acpi_power_button_sx))) 3568 return_VALUE (ACPI_INTERRUPT_NOT_HANDLED); 3569 return_VALUE (ACPI_INTERRUPT_HANDLED); 3570 } 3571 3572 UINT32 3573 acpi_event_power_button_wake(void *context) 3574 { 3575 struct acpi_softc *sc = (struct acpi_softc *)context; 3576 3577 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 3578 3579 if (ACPI_FAILURE(AcpiOsExecute(OSL_NOTIFY_HANDLER, 3580 acpi_invoke_wake_eventhandler, &sc->acpi_power_button_sx))) 3581 return_VALUE (ACPI_INTERRUPT_NOT_HANDLED); 3582 return_VALUE (ACPI_INTERRUPT_HANDLED); 3583 } 3584 3585 UINT32 3586 acpi_event_sleep_button_sleep(void *context) 3587 { 3588 struct acpi_softc *sc = (struct acpi_softc *)context; 3589 3590 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 3591 3592 if (ACPI_FAILURE(AcpiOsExecute(OSL_NOTIFY_HANDLER, 3593 acpi_invoke_sleep_eventhandler, &sc->acpi_sleep_button_sx))) 3594 return_VALUE (ACPI_INTERRUPT_NOT_HANDLED); 3595 return_VALUE (ACPI_INTERRUPT_HANDLED); 3596 } 3597 3598 UINT32 3599 acpi_event_sleep_button_wake(void *context) 3600 { 3601 struct acpi_softc *sc = (struct acpi_softc *)context; 3602 3603 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 3604 3605 if (ACPI_FAILURE(AcpiOsExecute(OSL_NOTIFY_HANDLER, 3606 acpi_invoke_wake_eventhandler, &sc->acpi_sleep_button_sx))) 3607 return_VALUE (ACPI_INTERRUPT_NOT_HANDLED); 3608 return_VALUE (ACPI_INTERRUPT_HANDLED); 3609 } 3610 3611 /* 3612 * XXX This static buffer is suboptimal. There is no locking so only 3613 * use this for single-threaded callers. 3614 */ 3615 char * 3616 acpi_name(ACPI_HANDLE handle) 3617 { 3618 ACPI_BUFFER buf; 3619 static char data[256]; 3620 3621 buf.Length = sizeof(data); 3622 buf.Pointer = data; 3623 3624 if (handle && ACPI_SUCCESS(AcpiGetName(handle, ACPI_FULL_PATHNAME, &buf))) 3625 return (data); 3626 return ("(unknown)"); 3627 } 3628 3629 /* 3630 * Debugging/bug-avoidance. Avoid trying to fetch info on various 3631 * parts of the namespace. 3632 */ 3633 int 3634 acpi_avoid(ACPI_HANDLE handle) 3635 { 3636 char *cp, *env, *np; 3637 int len; 3638 3639 np = acpi_name(handle); 3640 if (*np == '\\') 3641 np++; 3642 if ((env = kern_getenv("debug.acpi.avoid")) == NULL) 3643 return (0); 3644 3645 /* Scan the avoid list checking for a match */ 3646 cp = env; 3647 for (;;) { 3648 while (*cp != 0 && isspace(*cp)) 3649 cp++; 3650 if (*cp == 0) 3651 break; 3652 len = 0; 3653 while (cp[len] != 0 && !isspace(cp[len])) 3654 len++; 3655 if (!strncmp(cp, np, len)) { 3656 freeenv(env); 3657 return(1); 3658 } 3659 cp += len; 3660 } 3661 freeenv(env); 3662 3663 return (0); 3664 } 3665 3666 /* 3667 * Debugging/bug-avoidance. Disable ACPI subsystem components. 3668 */ 3669 int 3670 acpi_disabled(char *subsys) 3671 { 3672 char *cp, *env; 3673 int len; 3674 3675 if ((env = kern_getenv("debug.acpi.disabled")) == NULL) 3676 return (0); 3677 if (strcmp(env, "all") == 0) { 3678 freeenv(env); 3679 return (1); 3680 } 3681 3682 /* Scan the disable list, checking for a match. */ 3683 cp = env; 3684 for (;;) { 3685 while (*cp != '\0' && isspace(*cp)) 3686 cp++; 3687 if (*cp == '\0') 3688 break; 3689 len = 0; 3690 while (cp[len] != '\0' && !isspace(cp[len])) 3691 len++; 3692 if (strncmp(cp, subsys, len) == 0) { 3693 freeenv(env); 3694 return (1); 3695 } 3696 cp += len; 3697 } 3698 freeenv(env); 3699 3700 return (0); 3701 } 3702 3703 static void 3704 acpi_lookup(void *arg, const char *name, device_t *dev) 3705 { 3706 ACPI_HANDLE handle; 3707 3708 if (*dev != NULL) 3709 return; 3710 3711 /* 3712 * Allow any handle name that is specified as an absolute path and 3713 * starts with '\'. We could restrict this to \_SB and friends, 3714 * but see acpi_probe_children() for notes on why we scan the entire 3715 * namespace for devices. 3716 * 3717 * XXX: The pathname argument to AcpiGetHandle() should be fixed to 3718 * be const. 3719 */ 3720 if (name[0] != '\\') 3721 return; 3722 if (ACPI_FAILURE(AcpiGetHandle(ACPI_ROOT_OBJECT, __DECONST(char *, name), 3723 &handle))) 3724 return; 3725 *dev = acpi_get_device(handle); 3726 } 3727 3728 /* 3729 * Control interface. 3730 * 3731 * We multiplex ioctls for all participating ACPI devices here. Individual 3732 * drivers wanting to be accessible via /dev/acpi should use the 3733 * register/deregister interface to make their handlers visible. 3734 */ 3735 struct acpi_ioctl_hook 3736 { 3737 TAILQ_ENTRY(acpi_ioctl_hook) link; 3738 u_long cmd; 3739 acpi_ioctl_fn fn; 3740 void *arg; 3741 }; 3742 3743 static TAILQ_HEAD(,acpi_ioctl_hook) acpi_ioctl_hooks; 3744 static int acpi_ioctl_hooks_initted; 3745 3746 int 3747 acpi_register_ioctl(u_long cmd, acpi_ioctl_fn fn, void *arg) 3748 { 3749 struct acpi_ioctl_hook *hp; 3750 3751 if ((hp = malloc(sizeof(*hp), M_ACPIDEV, M_NOWAIT)) == NULL) 3752 return (ENOMEM); 3753 hp->cmd = cmd; 3754 hp->fn = fn; 3755 hp->arg = arg; 3756 3757 ACPI_LOCK(acpi); 3758 if (acpi_ioctl_hooks_initted == 0) { 3759 TAILQ_INIT(&acpi_ioctl_hooks); 3760 acpi_ioctl_hooks_initted = 1; 3761 } 3762 TAILQ_INSERT_TAIL(&acpi_ioctl_hooks, hp, link); 3763 ACPI_UNLOCK(acpi); 3764 3765 return (0); 3766 } 3767 3768 void 3769 acpi_deregister_ioctl(u_long cmd, acpi_ioctl_fn fn) 3770 { 3771 struct acpi_ioctl_hook *hp; 3772 3773 ACPI_LOCK(acpi); 3774 TAILQ_FOREACH(hp, &acpi_ioctl_hooks, link) 3775 if (hp->cmd == cmd && hp->fn == fn) 3776 break; 3777 3778 if (hp != NULL) { 3779 TAILQ_REMOVE(&acpi_ioctl_hooks, hp, link); 3780 free(hp, M_ACPIDEV); 3781 } 3782 ACPI_UNLOCK(acpi); 3783 } 3784 3785 static int 3786 acpiopen(struct cdev *dev, int flag, int fmt, struct thread *td) 3787 { 3788 return (0); 3789 } 3790 3791 static int 3792 acpiclose(struct cdev *dev, int flag, int fmt, struct thread *td) 3793 { 3794 return (0); 3795 } 3796 3797 static int 3798 acpiioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td) 3799 { 3800 struct acpi_softc *sc; 3801 struct acpi_ioctl_hook *hp; 3802 int error, state; 3803 3804 error = 0; 3805 hp = NULL; 3806 sc = dev->si_drv1; 3807 3808 /* 3809 * Scan the list of registered ioctls, looking for handlers. 3810 */ 3811 ACPI_LOCK(acpi); 3812 if (acpi_ioctl_hooks_initted) 3813 TAILQ_FOREACH(hp, &acpi_ioctl_hooks, link) { 3814 if (hp->cmd == cmd) 3815 break; 3816 } 3817 ACPI_UNLOCK(acpi); 3818 if (hp) 3819 return (hp->fn(cmd, addr, hp->arg)); 3820 3821 /* 3822 * Core ioctls are not permitted for non-writable user. 3823 * Currently, other ioctls just fetch information. 3824 * Not changing system behavior. 3825 */ 3826 if ((flag & FWRITE) == 0) 3827 return (EPERM); 3828 3829 /* Core system ioctls. */ 3830 switch (cmd) { 3831 case ACPIIO_REQSLPSTATE: 3832 state = *(int *)addr; 3833 if (state != ACPI_STATE_S5) 3834 return (acpi_ReqSleepState(sc, state)); 3835 device_printf(sc->acpi_dev, "power off via acpi ioctl not supported\n"); 3836 error = EOPNOTSUPP; 3837 break; 3838 case ACPIIO_ACKSLPSTATE: 3839 error = *(int *)addr; 3840 error = acpi_AckSleepState(sc->acpi_clone, error); 3841 break; 3842 case ACPIIO_SETSLPSTATE: /* DEPRECATED */ 3843 state = *(int *)addr; 3844 if (state < ACPI_STATE_S0 || state > ACPI_S_STATES_MAX) 3845 return (EINVAL); 3846 if (!acpi_sleep_states[state]) 3847 return (EOPNOTSUPP); 3848 if (ACPI_FAILURE(acpi_SetSleepState(sc, state))) 3849 error = ENXIO; 3850 break; 3851 default: 3852 error = ENXIO; 3853 break; 3854 } 3855 3856 return (error); 3857 } 3858 3859 static int 3860 acpi_sname2sstate(const char *sname) 3861 { 3862 int sstate; 3863 3864 if (toupper(sname[0]) == 'S') { 3865 sstate = sname[1] - '0'; 3866 if (sstate >= ACPI_STATE_S0 && sstate <= ACPI_STATE_S5 && 3867 sname[2] == '\0') 3868 return (sstate); 3869 } else if (strcasecmp(sname, "NONE") == 0) 3870 return (ACPI_STATE_UNKNOWN); 3871 return (-1); 3872 } 3873 3874 static const char * 3875 acpi_sstate2sname(int sstate) 3876 { 3877 static const char *snames[] = { "S0", "S1", "S2", "S3", "S4", "S5" }; 3878 3879 if (sstate >= ACPI_STATE_S0 && sstate <= ACPI_STATE_S5) 3880 return (snames[sstate]); 3881 else if (sstate == ACPI_STATE_UNKNOWN) 3882 return ("NONE"); 3883 return (NULL); 3884 } 3885 3886 static int 3887 acpi_supported_sleep_state_sysctl(SYSCTL_HANDLER_ARGS) 3888 { 3889 int error; 3890 struct sbuf sb; 3891 UINT8 state; 3892 3893 sbuf_new(&sb, NULL, 32, SBUF_AUTOEXTEND); 3894 for (state = ACPI_STATE_S1; state < ACPI_S_STATE_COUNT; state++) 3895 if (acpi_sleep_states[state]) 3896 sbuf_printf(&sb, "%s ", acpi_sstate2sname(state)); 3897 sbuf_trim(&sb); 3898 sbuf_finish(&sb); 3899 error = sysctl_handle_string(oidp, sbuf_data(&sb), sbuf_len(&sb), req); 3900 sbuf_delete(&sb); 3901 return (error); 3902 } 3903 3904 static int 3905 acpi_sleep_state_sysctl(SYSCTL_HANDLER_ARGS) 3906 { 3907 char sleep_state[10]; 3908 int error, new_state, old_state; 3909 3910 old_state = *(int *)oidp->oid_arg1; 3911 strlcpy(sleep_state, acpi_sstate2sname(old_state), sizeof(sleep_state)); 3912 error = sysctl_handle_string(oidp, sleep_state, sizeof(sleep_state), req); 3913 if (error == 0 && req->newptr != NULL) { 3914 new_state = acpi_sname2sstate(sleep_state); 3915 if (new_state < ACPI_STATE_S1) 3916 return (EINVAL); 3917 if (new_state < ACPI_S_STATE_COUNT && !acpi_sleep_states[new_state]) 3918 return (EOPNOTSUPP); 3919 if (new_state != old_state) 3920 *(int *)oidp->oid_arg1 = new_state; 3921 } 3922 return (error); 3923 } 3924 3925 /* Inform devctl(4) when we receive a Notify. */ 3926 void 3927 acpi_UserNotify(const char *subsystem, ACPI_HANDLE h, uint8_t notify) 3928 { 3929 char notify_buf[16]; 3930 ACPI_BUFFER handle_buf; 3931 ACPI_STATUS status; 3932 3933 if (subsystem == NULL) 3934 return; 3935 3936 handle_buf.Pointer = NULL; 3937 handle_buf.Length = ACPI_ALLOCATE_BUFFER; 3938 status = AcpiNsHandleToPathname(h, &handle_buf, FALSE); 3939 if (ACPI_FAILURE(status)) 3940 return; 3941 snprintf(notify_buf, sizeof(notify_buf), "notify=0x%02x", notify); 3942 devctl_notify("ACPI", subsystem, handle_buf.Pointer, notify_buf); 3943 AcpiOsFree(handle_buf.Pointer); 3944 } 3945 3946 #ifdef ACPI_DEBUG 3947 /* 3948 * Support for parsing debug options from the kernel environment. 3949 * 3950 * Bits may be set in the AcpiDbgLayer and AcpiDbgLevel debug registers 3951 * by specifying the names of the bits in the debug.acpi.layer and 3952 * debug.acpi.level environment variables. Bits may be unset by 3953 * prefixing the bit name with !. 3954 */ 3955 struct debugtag 3956 { 3957 char *name; 3958 UINT32 value; 3959 }; 3960 3961 static struct debugtag dbg_layer[] = { 3962 {"ACPI_UTILITIES", ACPI_UTILITIES}, 3963 {"ACPI_HARDWARE", ACPI_HARDWARE}, 3964 {"ACPI_EVENTS", ACPI_EVENTS}, 3965 {"ACPI_TABLES", ACPI_TABLES}, 3966 {"ACPI_NAMESPACE", ACPI_NAMESPACE}, 3967 {"ACPI_PARSER", ACPI_PARSER}, 3968 {"ACPI_DISPATCHER", ACPI_DISPATCHER}, 3969 {"ACPI_EXECUTER", ACPI_EXECUTER}, 3970 {"ACPI_RESOURCES", ACPI_RESOURCES}, 3971 {"ACPI_CA_DEBUGGER", ACPI_CA_DEBUGGER}, 3972 {"ACPI_OS_SERVICES", ACPI_OS_SERVICES}, 3973 {"ACPI_CA_DISASSEMBLER", ACPI_CA_DISASSEMBLER}, 3974 {"ACPI_ALL_COMPONENTS", ACPI_ALL_COMPONENTS}, 3975 3976 {"ACPI_AC_ADAPTER", ACPI_AC_ADAPTER}, 3977 {"ACPI_BATTERY", ACPI_BATTERY}, 3978 {"ACPI_BUS", ACPI_BUS}, 3979 {"ACPI_BUTTON", ACPI_BUTTON}, 3980 {"ACPI_EC", ACPI_EC}, 3981 {"ACPI_FAN", ACPI_FAN}, 3982 {"ACPI_POWERRES", ACPI_POWERRES}, 3983 {"ACPI_PROCESSOR", ACPI_PROCESSOR}, 3984 {"ACPI_THERMAL", ACPI_THERMAL}, 3985 {"ACPI_TIMER", ACPI_TIMER}, 3986 {"ACPI_ALL_DRIVERS", ACPI_ALL_DRIVERS}, 3987 {NULL, 0} 3988 }; 3989 3990 static struct debugtag dbg_level[] = { 3991 {"ACPI_LV_INIT", ACPI_LV_INIT}, 3992 {"ACPI_LV_DEBUG_OBJECT", ACPI_LV_DEBUG_OBJECT}, 3993 {"ACPI_LV_INFO", ACPI_LV_INFO}, 3994 {"ACPI_LV_REPAIR", ACPI_LV_REPAIR}, 3995 {"ACPI_LV_ALL_EXCEPTIONS", ACPI_LV_ALL_EXCEPTIONS}, 3996 3997 /* Trace verbosity level 1 [Standard Trace Level] */ 3998 {"ACPI_LV_INIT_NAMES", ACPI_LV_INIT_NAMES}, 3999 {"ACPI_LV_PARSE", ACPI_LV_PARSE}, 4000 {"ACPI_LV_LOAD", ACPI_LV_LOAD}, 4001 {"ACPI_LV_DISPATCH", ACPI_LV_DISPATCH}, 4002 {"ACPI_LV_EXEC", ACPI_LV_EXEC}, 4003 {"ACPI_LV_NAMES", ACPI_LV_NAMES}, 4004 {"ACPI_LV_OPREGION", ACPI_LV_OPREGION}, 4005 {"ACPI_LV_BFIELD", ACPI_LV_BFIELD}, 4006 {"ACPI_LV_TABLES", ACPI_LV_TABLES}, 4007 {"ACPI_LV_VALUES", ACPI_LV_VALUES}, 4008 {"ACPI_LV_OBJECTS", ACPI_LV_OBJECTS}, 4009 {"ACPI_LV_RESOURCES", ACPI_LV_RESOURCES}, 4010 {"ACPI_LV_USER_REQUESTS", ACPI_LV_USER_REQUESTS}, 4011 {"ACPI_LV_PACKAGE", ACPI_LV_PACKAGE}, 4012 {"ACPI_LV_VERBOSITY1", ACPI_LV_VERBOSITY1}, 4013 4014 /* Trace verbosity level 2 [Function tracing and memory allocation] */ 4015 {"ACPI_LV_ALLOCATIONS", ACPI_LV_ALLOCATIONS}, 4016 {"ACPI_LV_FUNCTIONS", ACPI_LV_FUNCTIONS}, 4017 {"ACPI_LV_OPTIMIZATIONS", ACPI_LV_OPTIMIZATIONS}, 4018 {"ACPI_LV_VERBOSITY2", ACPI_LV_VERBOSITY2}, 4019 {"ACPI_LV_ALL", ACPI_LV_ALL}, 4020 4021 /* Trace verbosity level 3 [Threading, I/O, and Interrupts] */ 4022 {"ACPI_LV_MUTEX", ACPI_LV_MUTEX}, 4023 {"ACPI_LV_THREADS", ACPI_LV_THREADS}, 4024 {"ACPI_LV_IO", ACPI_LV_IO}, 4025 {"ACPI_LV_INTERRUPTS", ACPI_LV_INTERRUPTS}, 4026 {"ACPI_LV_VERBOSITY3", ACPI_LV_VERBOSITY3}, 4027 4028 /* Exceptionally verbose output -- also used in the global "DebugLevel" */ 4029 {"ACPI_LV_AML_DISASSEMBLE", ACPI_LV_AML_DISASSEMBLE}, 4030 {"ACPI_LV_VERBOSE_INFO", ACPI_LV_VERBOSE_INFO}, 4031 {"ACPI_LV_FULL_TABLES", ACPI_LV_FULL_TABLES}, 4032 {"ACPI_LV_EVENTS", ACPI_LV_EVENTS}, 4033 {"ACPI_LV_VERBOSE", ACPI_LV_VERBOSE}, 4034 {NULL, 0} 4035 }; 4036 4037 static void 4038 acpi_parse_debug(char *cp, struct debugtag *tag, UINT32 *flag) 4039 { 4040 char *ep; 4041 int i, l; 4042 int set; 4043 4044 while (*cp) { 4045 if (isspace(*cp)) { 4046 cp++; 4047 continue; 4048 } 4049 ep = cp; 4050 while (*ep && !isspace(*ep)) 4051 ep++; 4052 if (*cp == '!') { 4053 set = 0; 4054 cp++; 4055 if (cp == ep) 4056 continue; 4057 } else { 4058 set = 1; 4059 } 4060 l = ep - cp; 4061 for (i = 0; tag[i].name != NULL; i++) { 4062 if (!strncmp(cp, tag[i].name, l)) { 4063 if (set) 4064 *flag |= tag[i].value; 4065 else 4066 *flag &= ~tag[i].value; 4067 } 4068 } 4069 cp = ep; 4070 } 4071 } 4072 4073 static void 4074 acpi_set_debugging(void *junk) 4075 { 4076 char *layer, *level; 4077 4078 if (cold) { 4079 AcpiDbgLayer = 0; 4080 AcpiDbgLevel = 0; 4081 } 4082 4083 layer = kern_getenv("debug.acpi.layer"); 4084 level = kern_getenv("debug.acpi.level"); 4085 if (layer == NULL && level == NULL) 4086 return; 4087 4088 printf("ACPI set debug"); 4089 if (layer != NULL) { 4090 if (strcmp("NONE", layer) != 0) 4091 printf(" layer '%s'", layer); 4092 acpi_parse_debug(layer, &dbg_layer[0], &AcpiDbgLayer); 4093 freeenv(layer); 4094 } 4095 if (level != NULL) { 4096 if (strcmp("NONE", level) != 0) 4097 printf(" level '%s'", level); 4098 acpi_parse_debug(level, &dbg_level[0], &AcpiDbgLevel); 4099 freeenv(level); 4100 } 4101 printf("\n"); 4102 } 4103 4104 SYSINIT(acpi_debugging, SI_SUB_TUNABLES, SI_ORDER_ANY, acpi_set_debugging, 4105 NULL); 4106 4107 static int 4108 acpi_debug_sysctl(SYSCTL_HANDLER_ARGS) 4109 { 4110 int error, *dbg; 4111 struct debugtag *tag; 4112 struct sbuf sb; 4113 char temp[128]; 4114 4115 if (sbuf_new(&sb, NULL, 128, SBUF_AUTOEXTEND) == NULL) 4116 return (ENOMEM); 4117 if (strcmp(oidp->oid_arg1, "debug.acpi.layer") == 0) { 4118 tag = &dbg_layer[0]; 4119 dbg = &AcpiDbgLayer; 4120 } else { 4121 tag = &dbg_level[0]; 4122 dbg = &AcpiDbgLevel; 4123 } 4124 4125 /* Get old values if this is a get request. */ 4126 ACPI_SERIAL_BEGIN(acpi); 4127 if (*dbg == 0) { 4128 sbuf_cpy(&sb, "NONE"); 4129 } else if (req->newptr == NULL) { 4130 for (; tag->name != NULL; tag++) { 4131 if ((*dbg & tag->value) == tag->value) 4132 sbuf_printf(&sb, "%s ", tag->name); 4133 } 4134 } 4135 sbuf_trim(&sb); 4136 sbuf_finish(&sb); 4137 strlcpy(temp, sbuf_data(&sb), sizeof(temp)); 4138 sbuf_delete(&sb); 4139 4140 error = sysctl_handle_string(oidp, temp, sizeof(temp), req); 4141 4142 /* Check for error or no change */ 4143 if (error == 0 && req->newptr != NULL) { 4144 *dbg = 0; 4145 kern_setenv((char *)oidp->oid_arg1, temp); 4146 acpi_set_debugging(NULL); 4147 } 4148 ACPI_SERIAL_END(acpi); 4149 4150 return (error); 4151 } 4152 4153 SYSCTL_PROC(_debug_acpi, OID_AUTO, layer, 4154 CTLFLAG_RW | CTLTYPE_STRING | CTLFLAG_NEEDGIANT, "debug.acpi.layer", 0, 4155 acpi_debug_sysctl, "A", 4156 ""); 4157 SYSCTL_PROC(_debug_acpi, OID_AUTO, level, 4158 CTLFLAG_RW | CTLTYPE_STRING | CTLFLAG_NEEDGIANT, "debug.acpi.level", 0, 4159 acpi_debug_sysctl, "A", 4160 ""); 4161 #endif /* ACPI_DEBUG */ 4162 4163 static int 4164 acpi_debug_objects_sysctl(SYSCTL_HANDLER_ARGS) 4165 { 4166 int error; 4167 int old; 4168 4169 old = acpi_debug_objects; 4170 error = sysctl_handle_int(oidp, &acpi_debug_objects, 0, req); 4171 if (error != 0 || req->newptr == NULL) 4172 return (error); 4173 if (old == acpi_debug_objects || (old && acpi_debug_objects)) 4174 return (0); 4175 4176 ACPI_SERIAL_BEGIN(acpi); 4177 AcpiGbl_EnableAmlDebugObject = acpi_debug_objects ? TRUE : FALSE; 4178 ACPI_SERIAL_END(acpi); 4179 4180 return (0); 4181 } 4182 4183 static int 4184 acpi_parse_interfaces(char *str, struct acpi_interface *iface) 4185 { 4186 char *p; 4187 size_t len; 4188 int i, j; 4189 4190 p = str; 4191 while (isspace(*p) || *p == ',') 4192 p++; 4193 len = strlen(p); 4194 if (len == 0) 4195 return (0); 4196 p = strdup(p, M_TEMP); 4197 for (i = 0; i < len; i++) 4198 if (p[i] == ',') 4199 p[i] = '\0'; 4200 i = j = 0; 4201 while (i < len) 4202 if (isspace(p[i]) || p[i] == '\0') 4203 i++; 4204 else { 4205 i += strlen(p + i) + 1; 4206 j++; 4207 } 4208 if (j == 0) { 4209 free(p, M_TEMP); 4210 return (0); 4211 } 4212 iface->data = malloc(sizeof(*iface->data) * j, M_TEMP, M_WAITOK); 4213 iface->num = j; 4214 i = j = 0; 4215 while (i < len) 4216 if (isspace(p[i]) || p[i] == '\0') 4217 i++; 4218 else { 4219 iface->data[j] = p + i; 4220 i += strlen(p + i) + 1; 4221 j++; 4222 } 4223 4224 return (j); 4225 } 4226 4227 static void 4228 acpi_free_interfaces(struct acpi_interface *iface) 4229 { 4230 4231 free(iface->data[0], M_TEMP); 4232 free(iface->data, M_TEMP); 4233 } 4234 4235 static void 4236 acpi_reset_interfaces(device_t dev) 4237 { 4238 struct acpi_interface list; 4239 ACPI_STATUS status; 4240 int i; 4241 4242 if (acpi_parse_interfaces(acpi_install_interface, &list) > 0) { 4243 for (i = 0; i < list.num; i++) { 4244 status = AcpiInstallInterface(list.data[i]); 4245 if (ACPI_FAILURE(status)) 4246 device_printf(dev, 4247 "failed to install _OSI(\"%s\"): %s\n", 4248 list.data[i], AcpiFormatException(status)); 4249 else if (bootverbose) 4250 device_printf(dev, "installed _OSI(\"%s\")\n", 4251 list.data[i]); 4252 } 4253 acpi_free_interfaces(&list); 4254 } 4255 if (acpi_parse_interfaces(acpi_remove_interface, &list) > 0) { 4256 for (i = 0; i < list.num; i++) { 4257 status = AcpiRemoveInterface(list.data[i]); 4258 if (ACPI_FAILURE(status)) 4259 device_printf(dev, 4260 "failed to remove _OSI(\"%s\"): %s\n", 4261 list.data[i], AcpiFormatException(status)); 4262 else if (bootverbose) 4263 device_printf(dev, "removed _OSI(\"%s\")\n", 4264 list.data[i]); 4265 } 4266 acpi_free_interfaces(&list); 4267 } 4268 } 4269 4270 static int 4271 acpi_pm_func(u_long cmd, void *arg, ...) 4272 { 4273 int state, acpi_state; 4274 int error; 4275 struct acpi_softc *sc; 4276 va_list ap; 4277 4278 error = 0; 4279 switch (cmd) { 4280 case POWER_CMD_SUSPEND: 4281 sc = (struct acpi_softc *)arg; 4282 if (sc == NULL) { 4283 error = EINVAL; 4284 goto out; 4285 } 4286 4287 va_start(ap, arg); 4288 state = va_arg(ap, int); 4289 va_end(ap); 4290 4291 switch (state) { 4292 case POWER_SLEEP_STATE_STANDBY: 4293 acpi_state = sc->acpi_standby_sx; 4294 break; 4295 case POWER_SLEEP_STATE_SUSPEND: 4296 acpi_state = sc->acpi_suspend_sx; 4297 break; 4298 case POWER_SLEEP_STATE_HIBERNATE: 4299 acpi_state = ACPI_STATE_S4; 4300 break; 4301 default: 4302 error = EINVAL; 4303 goto out; 4304 } 4305 4306 if (ACPI_FAILURE(acpi_EnterSleepState(sc, acpi_state))) 4307 error = ENXIO; 4308 break; 4309 default: 4310 error = EINVAL; 4311 goto out; 4312 } 4313 4314 out: 4315 return (error); 4316 } 4317 4318 static void 4319 acpi_pm_register(void *arg) 4320 { 4321 if (!cold || resource_disabled("acpi", 0)) 4322 return; 4323 4324 power_pm_register(POWER_PM_TYPE_ACPI, acpi_pm_func, NULL); 4325 } 4326 4327 SYSINIT(power, SI_SUB_KLD, SI_ORDER_ANY, acpi_pm_register, NULL); 4328