xref: /freebsd/sys/dev/acpica/acpi_pci_link.c (revision 39beb93c)
1 /*-
2  * Copyright (c) 2002 Mitsuru IWASAKI <iwasaki@jp.freebsd.org>
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  */
26 
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
29 
30 #include "opt_acpi.h"
31 #include <sys/param.h>
32 #include <sys/bus.h>
33 #include <sys/kernel.h>
34 #include <sys/limits.h>
35 #include <sys/malloc.h>
36 #include <sys/module.h>
37 
38 #include <contrib/dev/acpica/acpi.h>
39 #include <dev/acpica/acpivar.h>
40 #include <dev/acpica/acpi_pcibvar.h>
41 
42 #include <machine/pci_cfgreg.h>
43 #include <dev/pci/pcireg.h>
44 #include <dev/pci/pcivar.h>
45 #include "pcib_if.h"
46 
47 /* Hooks for the ACPI CA debugging infrastructure. */
48 #define _COMPONENT	ACPI_BUS
49 ACPI_MODULE_NAME("PCI_LINK")
50 
51 ACPI_SERIAL_DECL(pci_link, "ACPI PCI link");
52 
53 #define NUM_ISA_INTERRUPTS	16
54 #define NUM_ACPI_INTERRUPTS	256
55 
56 /*
57  * An ACPI PCI link device may contain multiple links.  Each link has its
58  * own ACPI resource.  _PRT entries specify which link is being used via
59  * the Source Index.
60  *
61  * XXX: A note about Source Indices and DPFs:  Currently we assume that
62  * the DPF start and end tags are not counted towards the index that
63  * Source Index corresponds to.  Also, we assume that when DPFs are in use
64  * they various sets overlap in terms of Indices.  Here's an example
65  * resource list indicating these assumptions:
66  *
67  * Resource		Index
68  * --------		-----
69  * I/O Port		0
70  * Start DPF		-
71  * IRQ			1
72  * MemIO		2
73  * Start DPF		-
74  * IRQ			1
75  * MemIO		2
76  * End DPF		-
77  * DMA Channel		3
78  *
79  * The XXX is because I'm not sure if this is a valid assumption to make.
80  */
81 
82 /* States during DPF processing. */
83 #define	DPF_OUTSIDE	0
84 #define	DPF_FIRST	1
85 #define	DPF_IGNORE	2
86 
87 struct link;
88 
89 struct acpi_pci_link_softc {
90 	int	pl_num_links;
91 	int	pl_crs_bad;
92 	struct link *pl_links;
93 	device_t pl_dev;
94 };
95 
96 struct link {
97 	struct acpi_pci_link_softc *l_sc;
98 	uint8_t	l_bios_irq;
99 	uint8_t	l_irq;
100 	uint8_t	l_initial_irq;
101 	int	l_res_index;
102 	int	l_num_irqs;
103 	int	*l_irqs;
104 	int	l_references;
105 	int	l_routed:1;
106 	int	l_isa_irq:1;
107 	ACPI_RESOURCE l_prs_template;
108 };
109 
110 struct link_count_request {
111 	int	in_dpf;
112 	int	count;
113 };
114 
115 struct link_res_request {
116 	struct acpi_pci_link_softc *sc;
117 	int	in_dpf;
118 	int	res_index;
119 	int	link_index;
120 };
121 
122 MALLOC_DEFINE(M_PCI_LINK, "pci_link", "ACPI PCI Link structures");
123 
124 static int pci_link_interrupt_weights[NUM_ACPI_INTERRUPTS];
125 static int pci_link_bios_isa_irqs;
126 
127 static char *pci_link_ids[] = { "PNP0C0F", NULL };
128 
129 /*
130  * Fetch the short name associated with an ACPI handle and save it in the
131  * passed in buffer.
132  */
133 static ACPI_STATUS
134 acpi_short_name(ACPI_HANDLE handle, char *buffer, size_t buflen)
135 {
136 	ACPI_BUFFER buf;
137 
138 	buf.Length = buflen;
139 	buf.Pointer = buffer;
140 	return (AcpiGetName(handle, ACPI_SINGLE_NAME, &buf));
141 }
142 
143 static int
144 acpi_pci_link_probe(device_t dev)
145 {
146 	char descr[28], name[12];
147 
148 	/*
149 	 * We explicitly do not check _STA since not all systems set it to
150 	 * sensible values.
151 	 */
152 	if (acpi_disabled("pci_link") ||
153 	    ACPI_ID_PROBE(device_get_parent(dev), dev, pci_link_ids) == NULL)
154 		return (ENXIO);
155 
156 	if (ACPI_SUCCESS(acpi_short_name(acpi_get_handle(dev), name,
157 	    sizeof(name)))) {
158 		snprintf(descr, sizeof(descr), "ACPI PCI Link %s", name);
159 		device_set_desc_copy(dev, descr);
160 	} else
161 		device_set_desc(dev, "ACPI PCI Link");
162 	device_quiet(dev);
163 	return (0);
164 }
165 
166 static ACPI_STATUS
167 acpi_count_irq_resources(ACPI_RESOURCE *res, void *context)
168 {
169 	struct link_count_request *req;
170 
171 	req = (struct link_count_request *)context;
172 	switch (res->Type) {
173 	case ACPI_RESOURCE_TYPE_START_DEPENDENT:
174 		switch (req->in_dpf) {
175 		case DPF_OUTSIDE:
176 			/* We've started the first DPF. */
177 			req->in_dpf = DPF_FIRST;
178 			break;
179 		case DPF_FIRST:
180 			/* We've started the second DPF. */
181 			req->in_dpf = DPF_IGNORE;
182 			break;
183 		}
184 		break;
185 	case ACPI_RESOURCE_TYPE_END_DEPENDENT:
186 		/* We are finished with DPF parsing. */
187 		KASSERT(req->in_dpf != DPF_OUTSIDE,
188 		    ("%s: end dpf when not parsing a dpf", __func__));
189 		req->in_dpf = DPF_OUTSIDE;
190 		break;
191 	case ACPI_RESOURCE_TYPE_IRQ:
192 	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
193 		/*
194 		 * Don't count resources if we are in a DPF set that we are
195 		 * ignoring.
196 		 */
197 		if (req->in_dpf != DPF_IGNORE)
198 			req->count++;
199 	}
200 	return (AE_OK);
201 }
202 
203 static ACPI_STATUS
204 link_add_crs(ACPI_RESOURCE *res, void *context)
205 {
206 	struct link_res_request *req;
207 	struct link *link;
208 
209 	ACPI_SERIAL_ASSERT(pci_link);
210 	req = (struct link_res_request *)context;
211 	switch (res->Type) {
212 	case ACPI_RESOURCE_TYPE_START_DEPENDENT:
213 		switch (req->in_dpf) {
214 		case DPF_OUTSIDE:
215 			/* We've started the first DPF. */
216 			req->in_dpf = DPF_FIRST;
217 			break;
218 		case DPF_FIRST:
219 			/* We've started the second DPF. */
220 			panic(
221 		"%s: Multiple dependent functions within a current resource",
222 			    __func__);
223 			break;
224 		}
225 		break;
226 	case ACPI_RESOURCE_TYPE_END_DEPENDENT:
227 		/* We are finished with DPF parsing. */
228 		KASSERT(req->in_dpf != DPF_OUTSIDE,
229 		    ("%s: end dpf when not parsing a dpf", __func__));
230 		req->in_dpf = DPF_OUTSIDE;
231 		break;
232 	case ACPI_RESOURCE_TYPE_IRQ:
233 	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
234 		KASSERT(req->link_index < req->sc->pl_num_links,
235 		    ("%s: array boundary violation", __func__));
236 		link = &req->sc->pl_links[req->link_index];
237 		link->l_res_index = req->res_index;
238 		req->link_index++;
239 		req->res_index++;
240 
241 		/*
242 		 * Only use the current value if there's one IRQ.  Some
243 		 * systems return multiple IRQs (which is nonsense for _CRS)
244 		 * when the link hasn't been programmed.
245 		 */
246 		if (res->Type == ACPI_RESOURCE_TYPE_IRQ) {
247 			if (res->Data.Irq.InterruptCount == 1)
248 				link->l_irq = res->Data.Irq.Interrupts[0];
249 		} else if (res->Data.ExtendedIrq.InterruptCount == 1)
250 			link->l_irq = res->Data.ExtendedIrq.Interrupts[0];
251 
252 		/*
253 		 * An IRQ of zero means that the link isn't routed.
254 		 */
255 		if (link->l_irq == 0)
256 			link->l_irq = PCI_INVALID_IRQ;
257 		break;
258 	default:
259 		req->res_index++;
260 	}
261 	return (AE_OK);
262 }
263 
264 /*
265  * Populate the set of possible IRQs for each device.
266  */
267 static ACPI_STATUS
268 link_add_prs(ACPI_RESOURCE *res, void *context)
269 {
270 	struct link_res_request *req;
271 	struct link *link;
272 	UINT8 *irqs = NULL;
273 	UINT32 *ext_irqs = NULL;
274 	int i, is_ext_irq = 1;
275 
276 	ACPI_SERIAL_ASSERT(pci_link);
277 	req = (struct link_res_request *)context;
278 	switch (res->Type) {
279 	case ACPI_RESOURCE_TYPE_START_DEPENDENT:
280 		switch (req->in_dpf) {
281 		case DPF_OUTSIDE:
282 			/* We've started the first DPF. */
283 			req->in_dpf = DPF_FIRST;
284 			break;
285 		case DPF_FIRST:
286 			/* We've started the second DPF. */
287 			req->in_dpf = DPF_IGNORE;
288 			break;
289 		}
290 		break;
291 	case ACPI_RESOURCE_TYPE_END_DEPENDENT:
292 		/* We are finished with DPF parsing. */
293 		KASSERT(req->in_dpf != DPF_OUTSIDE,
294 		    ("%s: end dpf when not parsing a dpf", __func__));
295 		req->in_dpf = DPF_OUTSIDE;
296 		break;
297 	case ACPI_RESOURCE_TYPE_IRQ:
298 		is_ext_irq = 0;
299 		/* fall through */
300 	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
301 		/*
302 		 * Don't parse resources if we are in a DPF set that we are
303 		 * ignoring.
304 		 */
305 		if (req->in_dpf == DPF_IGNORE)
306 			break;
307 
308 		KASSERT(req->link_index < req->sc->pl_num_links,
309 		    ("%s: array boundary violation", __func__));
310 		link = &req->sc->pl_links[req->link_index];
311 		if (link->l_res_index == -1) {
312 			KASSERT(req->sc->pl_crs_bad,
313 			    ("res_index should be set"));
314 			link->l_res_index = req->res_index;
315 		}
316 		req->link_index++;
317 		req->res_index++;
318 
319 		/*
320 		 * Stash a copy of the resource for later use when doing
321 		 * _SRS.
322 		 */
323 		bcopy(res, &link->l_prs_template, sizeof(ACPI_RESOURCE));
324 		if (is_ext_irq) {
325 			link->l_num_irqs =
326 			    res->Data.ExtendedIrq.InterruptCount;
327 			ext_irqs = res->Data.ExtendedIrq.Interrupts;
328 		} else {
329 			link->l_num_irqs = res->Data.Irq.InterruptCount;
330 			irqs = res->Data.Irq.Interrupts;
331 		}
332 		if (link->l_num_irqs == 0)
333 			break;
334 
335 		/*
336 		 * Save a list of the valid IRQs.  Also, if all of the
337 		 * valid IRQs are ISA IRQs, then mark this link as
338 		 * routed via an ISA interrupt.
339 		 */
340 		link->l_isa_irq = TRUE;
341 		link->l_irqs = malloc(sizeof(int) * link->l_num_irqs,
342 		    M_PCI_LINK, M_WAITOK | M_ZERO);
343 		for (i = 0; i < link->l_num_irqs; i++) {
344 			if (is_ext_irq) {
345 				link->l_irqs[i] = ext_irqs[i];
346 				if (ext_irqs[i] >= NUM_ISA_INTERRUPTS)
347 					link->l_isa_irq = FALSE;
348 			} else {
349 				link->l_irqs[i] = irqs[i];
350 				if (irqs[i] >= NUM_ISA_INTERRUPTS)
351 					link->l_isa_irq = FALSE;
352 			}
353 		}
354 		break;
355 	default:
356 		if (req->in_dpf == DPF_IGNORE)
357 			break;
358 		if (req->sc->pl_crs_bad)
359 			device_printf(req->sc->pl_dev,
360 		    "Warning: possible resource %d will be lost during _SRS\n",
361 			    req->res_index);
362 		req->res_index++;
363 	}
364 	return (AE_OK);
365 }
366 
367 static int
368 link_valid_irq(struct link *link, int irq)
369 {
370 	int i;
371 
372 	ACPI_SERIAL_ASSERT(pci_link);
373 
374 	/* Invalid interrupts are never valid. */
375 	if (!PCI_INTERRUPT_VALID(irq))
376 		return (FALSE);
377 
378 	/* Any interrupt in the list of possible interrupts is valid. */
379 	for (i = 0; i < link->l_num_irqs; i++)
380 		if (link->l_irqs[i] == irq)
381 			 return (TRUE);
382 
383 	/*
384 	 * For links routed via an ISA interrupt, if the SCI is routed via
385 	 * an ISA interrupt, the SCI is always treated as a valid IRQ.
386 	 */
387 	if (link->l_isa_irq && AcpiGbl_FADT.SciInterrupt == irq &&
388 	    irq < NUM_ISA_INTERRUPTS)
389 		return (TRUE);
390 
391 	/* If the interrupt wasn't found in the list it is not valid. */
392 	return (FALSE);
393 }
394 
395 static void
396 acpi_pci_link_dump(struct acpi_pci_link_softc *sc, int header, const char *tag)
397 {
398 	struct link *link;
399 	char buf[16];
400 	int i, j;
401 
402 	ACPI_SERIAL_ASSERT(pci_link);
403 	if (header) {
404 		snprintf(buf, sizeof(buf), "%s:",
405 		    device_get_nameunit(sc->pl_dev));
406 		printf("%-16.16s  Index  IRQ  Rtd  Ref  IRQs\n", buf);
407 	}
408 	for (i = 0; i < sc->pl_num_links; i++) {
409 		link = &sc->pl_links[i];
410 		printf("  %-14.14s  %5d  %3d   %c   %3d ", i == 0 ? tag : "", i,
411 		    link->l_irq, link->l_routed ? 'Y' : 'N',
412 		    link->l_references);
413 		if (link->l_num_irqs == 0)
414 			printf(" none");
415 		else for (j = 0; j < link->l_num_irqs; j++)
416 			printf(" %d", link->l_irqs[j]);
417 		printf("\n");
418 	}
419 }
420 
421 static int
422 acpi_pci_link_attach(device_t dev)
423 {
424 	struct acpi_pci_link_softc *sc;
425 	struct link_count_request creq;
426 	struct link_res_request rreq;
427 	ACPI_STATUS status;
428 	int i;
429 
430 	sc = device_get_softc(dev);
431 	sc->pl_dev = dev;
432 	ACPI_SERIAL_BEGIN(pci_link);
433 
434 	/*
435 	 * Count the number of current resources so we know how big of
436 	 * a link array to allocate.  On some systems, _CRS is broken,
437 	 * so for those systems try to derive the count from _PRS instead.
438 	 */
439 	creq.in_dpf = DPF_OUTSIDE;
440 	creq.count = 0;
441 	status = AcpiWalkResources(acpi_get_handle(dev), "_CRS",
442 	    acpi_count_irq_resources, &creq);
443 	sc->pl_crs_bad = ACPI_FAILURE(status);
444 	if (sc->pl_crs_bad) {
445 		creq.in_dpf = DPF_OUTSIDE;
446 		creq.count = 0;
447 		status = AcpiWalkResources(acpi_get_handle(dev), "_PRS",
448 		    acpi_count_irq_resources, &creq);
449 		if (ACPI_FAILURE(status)) {
450 			device_printf(dev,
451 			    "Unable to parse _CRS or _PRS: %s\n",
452 			    AcpiFormatException(status));
453 			ACPI_SERIAL_END(pci_link);
454 			return (ENXIO);
455 		}
456 	}
457 	sc->pl_num_links = creq.count;
458 	if (creq.count == 0) {
459 		ACPI_SERIAL_END(pci_link);
460 		return (0);
461 	}
462 	sc->pl_links = malloc(sizeof(struct link) * sc->pl_num_links,
463 	    M_PCI_LINK, M_WAITOK | M_ZERO);
464 
465 	/* Initialize the child links. */
466 	for (i = 0; i < sc->pl_num_links; i++) {
467 		sc->pl_links[i].l_irq = PCI_INVALID_IRQ;
468 		sc->pl_links[i].l_bios_irq = PCI_INVALID_IRQ;
469 		sc->pl_links[i].l_sc = sc;
470 		sc->pl_links[i].l_isa_irq = FALSE;
471 		sc->pl_links[i].l_res_index = -1;
472 	}
473 
474 	/* Try to read the current settings from _CRS if it is valid. */
475 	if (!sc->pl_crs_bad) {
476 		rreq.in_dpf = DPF_OUTSIDE;
477 		rreq.link_index = 0;
478 		rreq.res_index = 0;
479 		rreq.sc = sc;
480 		status = AcpiWalkResources(acpi_get_handle(dev), "_CRS",
481 		    link_add_crs, &rreq);
482 		if (ACPI_FAILURE(status)) {
483 			device_printf(dev, "Unable to parse _CRS: %s\n",
484 			    AcpiFormatException(status));
485 			goto fail;
486 		}
487 	}
488 
489 	/*
490 	 * Try to read the possible settings from _PRS.  Note that if the
491 	 * _CRS is toast, we depend on having a working _PRS.  However, if
492 	 * _CRS works, then it is ok for _PRS to be missing.
493 	 */
494 	rreq.in_dpf = DPF_OUTSIDE;
495 	rreq.link_index = 0;
496 	rreq.res_index = 0;
497 	rreq.sc = sc;
498 	status = AcpiWalkResources(acpi_get_handle(dev), "_PRS",
499 	    link_add_prs, &rreq);
500 	if (ACPI_FAILURE(status) &&
501 	    (status != AE_NOT_FOUND || sc->pl_crs_bad)) {
502 		device_printf(dev, "Unable to parse _PRS: %s\n",
503 		    AcpiFormatException(status));
504 		goto fail;
505 	}
506 	if (bootverbose)
507 		acpi_pci_link_dump(sc, 1, "Initial Probe");
508 
509 	/* Verify initial IRQs if we have _PRS. */
510 	if (status != AE_NOT_FOUND)
511 		for (i = 0; i < sc->pl_num_links; i++)
512 			if (!link_valid_irq(&sc->pl_links[i],
513 			    sc->pl_links[i].l_irq))
514 				sc->pl_links[i].l_irq = PCI_INVALID_IRQ;
515 	if (bootverbose)
516 		acpi_pci_link_dump(sc, 0, "Validation");
517 
518 	/* Save initial IRQs. */
519 	for (i = 0; i < sc->pl_num_links; i++)
520 		sc->pl_links[i].l_initial_irq = sc->pl_links[i].l_irq;
521 
522 	/*
523 	 * Try to disable this link.  If successful, set the current IRQ to
524 	 * zero and flags to indicate this link is not routed.  If we can't
525 	 * run _DIS (i.e., the method doesn't exist), assume the initial
526 	 * IRQ was routed by the BIOS.
527 	 */
528 	if (ACPI_SUCCESS(AcpiEvaluateObject(acpi_get_handle(dev), "_DIS", NULL,
529 	    NULL)))
530 		for (i = 0; i < sc->pl_num_links; i++)
531 			sc->pl_links[i].l_irq = PCI_INVALID_IRQ;
532 	else
533 		for (i = 0; i < sc->pl_num_links; i++)
534 			if (PCI_INTERRUPT_VALID(sc->pl_links[i].l_irq))
535 				sc->pl_links[i].l_routed = TRUE;
536 	if (bootverbose)
537 		acpi_pci_link_dump(sc, 0, "After Disable");
538 	ACPI_SERIAL_END(pci_link);
539 	return (0);
540 fail:
541 	ACPI_SERIAL_END(pci_link);
542 	for (i = 0; i < sc->pl_num_links; i++)
543 		if (sc->pl_links[i].l_irqs != NULL)
544 			free(sc->pl_links[i].l_irqs, M_PCI_LINK);
545 	free(sc->pl_links, M_PCI_LINK);
546 	return (ENXIO);
547 }
548 
549 /* XXX: Note that this is identical to pci_pir_search_irq(). */
550 static uint8_t
551 acpi_pci_link_search_irq(int bus, int device, int pin)
552 {
553 	uint32_t value;
554 	uint8_t func, maxfunc;
555 
556 	/* See if we have a valid device at function 0. */
557 	value = pci_cfgregread(bus, device, 0, PCIR_HDRTYPE, 1);
558 	if ((value & PCIM_HDRTYPE) > PCI_MAXHDRTYPE)
559 		return (PCI_INVALID_IRQ);
560 	if (value & PCIM_MFDEV)
561 		maxfunc = PCI_FUNCMAX;
562 	else
563 		maxfunc = 0;
564 
565 	/* Scan all possible functions at this device. */
566 	for (func = 0; func <= maxfunc; func++) {
567 		value = pci_cfgregread(bus, device, func, PCIR_DEVVENDOR, 4);
568 		if (value == 0xffffffff)
569 			continue;
570 		value = pci_cfgregread(bus, device, func, PCIR_INTPIN, 1);
571 
572 		/*
573 		 * See if it uses the pin in question.  Note that the passed
574 		 * in pin uses 0 for A, .. 3 for D whereas the intpin
575 		 * register uses 0 for no interrupt, 1 for A, .. 4 for D.
576 		 */
577 		if (value != pin + 1)
578 			continue;
579 		value = pci_cfgregread(bus, device, func, PCIR_INTLINE, 1);
580 		if (bootverbose)
581 			printf(
582 		"ACPI: Found matching pin for %d.%d.INT%c at func %d: %d\n",
583 			    bus, device, pin + 'A', func, value);
584 		if (value != PCI_INVALID_IRQ)
585 			return (value);
586 	}
587 	return (PCI_INVALID_IRQ);
588 }
589 
590 /*
591  * Find the link structure that corresponds to the resource index passed in
592  * via 'source_index'.
593  */
594 static struct link *
595 acpi_pci_link_lookup(device_t dev, int source_index)
596 {
597 	struct acpi_pci_link_softc *sc;
598 	int i;
599 
600 	ACPI_SERIAL_ASSERT(pci_link);
601 	sc = device_get_softc(dev);
602 	for (i = 0; i < sc->pl_num_links; i++)
603 		if (sc->pl_links[i].l_res_index == source_index)
604 			return (&sc->pl_links[i]);
605 	return (NULL);
606 }
607 
608 void
609 acpi_pci_link_add_reference(device_t dev, int index, device_t pcib, int slot,
610     int pin)
611 {
612 	struct link *link;
613 	uint8_t bios_irq;
614 	uintptr_t bus;
615 
616 	/*
617 	 * Look up the PCI bus for the specified PCI bridge device.  Note
618 	 * that the PCI bridge device might not have any children yet.
619 	 * However, looking up its bus number doesn't require a valid child
620 	 * device, so we just pass NULL.
621 	 */
622 	if (BUS_READ_IVAR(pcib, NULL, PCIB_IVAR_BUS, &bus) != 0) {
623 		device_printf(pcib, "Unable to read PCI bus number");
624 		panic("PCI bridge without a bus number");
625 	}
626 
627 	/* Bump the reference count. */
628 	ACPI_SERIAL_BEGIN(pci_link);
629 	link = acpi_pci_link_lookup(dev, index);
630 	if (link == NULL) {
631 		device_printf(dev, "apparently invalid index %d\n", index);
632 		ACPI_SERIAL_END(pci_link);
633 		return;
634 	}
635 	link->l_references++;
636 	if (link->l_routed)
637 		pci_link_interrupt_weights[link->l_irq]++;
638 
639 	/*
640 	 * The BIOS only routes interrupts via ISA IRQs using the ATPICs
641 	 * (8259As).  Thus, if this link is routed via an ISA IRQ, go
642 	 * look to see if the BIOS routed an IRQ for this link at the
643 	 * indicated (bus, slot, pin).  If so, we prefer that IRQ for
644 	 * this link and add that IRQ to our list of known-good IRQs.
645 	 * This provides a good work-around for link devices whose _CRS
646 	 * method is either broken or bogus.  We only use the value
647 	 * returned by _CRS if we can't find a valid IRQ via this method
648 	 * in fact.
649 	 *
650 	 * If this link is not routed via an ISA IRQ (because we are using
651 	 * APIC for example), then don't bother looking up the BIOS IRQ
652 	 * as if we find one it won't be valid anyway.
653 	 */
654 	if (!link->l_isa_irq) {
655 		ACPI_SERIAL_END(pci_link);
656 		return;
657 	}
658 
659 	/* Try to find a BIOS IRQ setting from any matching devices. */
660 	bios_irq = acpi_pci_link_search_irq(bus, slot, pin);
661 	if (!PCI_INTERRUPT_VALID(bios_irq)) {
662 		ACPI_SERIAL_END(pci_link);
663 		return;
664 	}
665 
666 	/* Validate the BIOS IRQ. */
667 	if (!link_valid_irq(link, bios_irq)) {
668 		device_printf(dev, "BIOS IRQ %u for %d.%d.INT%c is invalid\n",
669 		    bios_irq, (int)bus, slot, pin + 'A');
670 	} else if (!PCI_INTERRUPT_VALID(link->l_bios_irq)) {
671 		link->l_bios_irq = bios_irq;
672 		if (bios_irq < NUM_ISA_INTERRUPTS)
673 			pci_link_bios_isa_irqs |= (1 << bios_irq);
674 		if (bios_irq != link->l_initial_irq &&
675 		    PCI_INTERRUPT_VALID(link->l_initial_irq))
676 			device_printf(dev,
677 			    "BIOS IRQ %u does not match initial IRQ %u\n",
678 			    bios_irq, link->l_initial_irq);
679 	} else if (bios_irq != link->l_bios_irq)
680 		device_printf(dev,
681 	    "BIOS IRQ %u for %d.%d.INT%c does not match previous BIOS IRQ %u\n",
682 		    bios_irq, (int)bus, slot, pin + 'A',
683 		    link->l_bios_irq);
684 	ACPI_SERIAL_END(pci_link);
685 }
686 
687 static ACPI_STATUS
688 acpi_pci_link_srs_from_crs(struct acpi_pci_link_softc *sc, ACPI_BUFFER *srsbuf)
689 {
690 	ACPI_RESOURCE *resource, *end, newres, *resptr;
691 	ACPI_BUFFER crsbuf;
692 	ACPI_STATUS status;
693 	struct link *link;
694 	int i, in_dpf;
695 
696 	/* Fetch the _CRS. */
697 	ACPI_SERIAL_ASSERT(pci_link);
698 	crsbuf.Pointer = NULL;
699 	crsbuf.Length = ACPI_ALLOCATE_BUFFER;
700 	status = AcpiGetCurrentResources(acpi_get_handle(sc->pl_dev), &crsbuf);
701 	if (ACPI_SUCCESS(status) && crsbuf.Pointer == NULL)
702 		status = AE_NO_MEMORY;
703 	if (ACPI_FAILURE(status)) {
704 		if (bootverbose)
705 			device_printf(sc->pl_dev,
706 			    "Unable to fetch current resources: %s\n",
707 			    AcpiFormatException(status));
708 		return (status);
709 	}
710 
711 	/* Fill in IRQ resources via link structures. */
712 	srsbuf->Pointer = NULL;
713 	link = sc->pl_links;
714 	i = 0;
715 	in_dpf = DPF_OUTSIDE;
716 	resource = (ACPI_RESOURCE *)crsbuf.Pointer;
717 	end = (ACPI_RESOURCE *)((char *)crsbuf.Pointer + crsbuf.Length);
718 	for (;;) {
719 		switch (resource->Type) {
720 		case ACPI_RESOURCE_TYPE_START_DEPENDENT:
721 			switch (in_dpf) {
722 			case DPF_OUTSIDE:
723 				/* We've started the first DPF. */
724 				in_dpf = DPF_FIRST;
725 				break;
726 			case DPF_FIRST:
727 				/* We've started the second DPF. */
728 				panic(
729 		"%s: Multiple dependent functions within a current resource",
730 				    __func__);
731 				break;
732 			}
733 			resptr = NULL;
734 			break;
735 		case ACPI_RESOURCE_TYPE_END_DEPENDENT:
736 			/* We are finished with DPF parsing. */
737 			KASSERT(in_dpf != DPF_OUTSIDE,
738 			    ("%s: end dpf when not parsing a dpf", __func__));
739 			in_dpf = DPF_OUTSIDE;
740 			resptr = NULL;
741 			break;
742 		case ACPI_RESOURCE_TYPE_IRQ:
743 			MPASS(i < sc->pl_num_links);
744 			MPASS(link->l_prs_template.Type == ACPI_RESOURCE_TYPE_IRQ);
745 			newres = link->l_prs_template;
746 			resptr = &newres;
747 			resptr->Data.Irq.InterruptCount = 1;
748 			if (PCI_INTERRUPT_VALID(link->l_irq)) {
749 				KASSERT(link->l_irq < NUM_ISA_INTERRUPTS,
750 		("%s: can't put non-ISA IRQ %d in legacy IRQ resource type",
751 				    __func__, link->l_irq));
752 				resptr->Data.Irq.Interrupts[0] = link->l_irq;
753 			} else
754 				resptr->Data.Irq.Interrupts[0] = 0;
755 			link++;
756 			i++;
757 			break;
758 		case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
759 			MPASS(i < sc->pl_num_links);
760 			MPASS(link->l_prs_template.Type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ);
761 			newres = link->l_prs_template;
762 			resptr = &newres;
763 			resptr->Data.ExtendedIrq.InterruptCount = 1;
764 			if (PCI_INTERRUPT_VALID(link->l_irq))
765 				resptr->Data.ExtendedIrq.Interrupts[0] =
766 				    link->l_irq;
767 			else
768 				resptr->Data.ExtendedIrq.Interrupts[0] = 0;
769 			link++;
770 			i++;
771 			break;
772 		default:
773 			resptr = resource;
774 		}
775 		if (resptr != NULL) {
776 			status = acpi_AppendBufferResource(srsbuf, resptr);
777 			if (ACPI_FAILURE(status)) {
778 				device_printf(sc->pl_dev,
779 				    "Unable to build resources: %s\n",
780 				    AcpiFormatException(status));
781 				if (srsbuf->Pointer != NULL)
782 					AcpiOsFree(srsbuf->Pointer);
783 				AcpiOsFree(crsbuf.Pointer);
784 				return (status);
785 			}
786 		}
787 		if (resource->Type == ACPI_RESOURCE_TYPE_END_TAG)
788 			break;
789 		resource = ACPI_NEXT_RESOURCE(resource);
790 		if (resource >= end)
791 			break;
792 	}
793 	AcpiOsFree(crsbuf.Pointer);
794 	return (AE_OK);
795 }
796 
797 static ACPI_STATUS
798 acpi_pci_link_srs_from_links(struct acpi_pci_link_softc *sc,
799     ACPI_BUFFER *srsbuf)
800 {
801 	ACPI_RESOURCE newres;
802 	ACPI_STATUS status;
803 	struct link *link;
804 	int i;
805 
806 	/* Start off with an empty buffer. */
807 	srsbuf->Pointer = NULL;
808 	link = sc->pl_links;
809 	for (i = 0; i < sc->pl_num_links; i++) {
810 
811 		/* Add a new IRQ resource from each link. */
812 		link = &sc->pl_links[i];
813 		newres = link->l_prs_template;
814 		if (newres.Type == ACPI_RESOURCE_TYPE_IRQ) {
815 
816 			/* Build an IRQ resource. */
817 			newres.Data.Irq.InterruptCount = 1;
818 			if (PCI_INTERRUPT_VALID(link->l_irq)) {
819 				KASSERT(link->l_irq < NUM_ISA_INTERRUPTS,
820 		("%s: can't put non-ISA IRQ %d in legacy IRQ resource type",
821 				    __func__, link->l_irq));
822 				newres.Data.Irq.Interrupts[0] = link->l_irq;
823 			} else
824 				newres.Data.Irq.Interrupts[0] = 0;
825 		} else {
826 
827 			/* Build an ExtIRQ resuorce. */
828 			newres.Data.ExtendedIrq.InterruptCount = 1;
829 			if (PCI_INTERRUPT_VALID(link->l_irq))
830 				newres.Data.ExtendedIrq.Interrupts[0] =
831 				    link->l_irq;
832 			else
833 				newres.Data.ExtendedIrq.Interrupts[0] = 0;
834 		}
835 
836 		/* Add the new resource to the end of the _SRS buffer. */
837 		status = acpi_AppendBufferResource(srsbuf, &newres);
838 		if (ACPI_FAILURE(status)) {
839 			device_printf(sc->pl_dev,
840 			    "Unable to build resources: %s\n",
841 			    AcpiFormatException(status));
842 			if (srsbuf->Pointer != NULL)
843 				AcpiOsFree(srsbuf->Pointer);
844 			return (status);
845 		}
846 	}
847 	return (AE_OK);
848 }
849 
850 static ACPI_STATUS
851 acpi_pci_link_route_irqs(device_t dev)
852 {
853 	struct acpi_pci_link_softc *sc;
854 	ACPI_RESOURCE *resource, *end;
855 	ACPI_BUFFER srsbuf;
856 	ACPI_STATUS status;
857 	struct link *link;
858 	int i;
859 
860 	ACPI_SERIAL_ASSERT(pci_link);
861 	sc = device_get_softc(dev);
862 	if (sc->pl_crs_bad)
863 		status = acpi_pci_link_srs_from_links(sc, &srsbuf);
864 	else
865 		status = acpi_pci_link_srs_from_crs(sc, &srsbuf);
866 
867 	/* Write out new resources via _SRS. */
868 	status = AcpiSetCurrentResources(acpi_get_handle(dev), &srsbuf);
869 	if (ACPI_FAILURE(status)) {
870 		device_printf(dev, "Unable to route IRQs: %s\n",
871 		    AcpiFormatException(status));
872 		AcpiOsFree(srsbuf.Pointer);
873 		return (status);
874 	}
875 
876 	/*
877 	 * Perform acpi_config_intr() on each IRQ resource if it was just
878 	 * routed for the first time.
879 	 */
880 	link = sc->pl_links;
881 	i = 0;
882 	resource = (ACPI_RESOURCE *)srsbuf.Pointer;
883 	end = (ACPI_RESOURCE *)((char *)srsbuf.Pointer + srsbuf.Length);
884 	for (;;) {
885 		if (resource->Type == ACPI_RESOURCE_TYPE_END_TAG)
886 			break;
887 		switch (resource->Type) {
888 		case ACPI_RESOURCE_TYPE_IRQ:
889 		case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
890 			MPASS(i < sc->pl_num_links);
891 
892 			/*
893 			 * Only configure the interrupt and update the
894 			 * weights if this link has a valid IRQ and was
895 			 * previously unrouted.
896 			 */
897 			if (!link->l_routed &&
898 			    PCI_INTERRUPT_VALID(link->l_irq)) {
899 				link->l_routed = TRUE;
900 				acpi_config_intr(dev, resource);
901 				pci_link_interrupt_weights[link->l_irq] +=
902 				    link->l_references;
903 			}
904 			link++;
905 			i++;
906 			break;
907 		}
908 		resource = ACPI_NEXT_RESOURCE(resource);
909 		if (resource >= end)
910 			break;
911 	}
912 	AcpiOsFree(srsbuf.Pointer);
913 	return (AE_OK);
914 }
915 
916 static int
917 acpi_pci_link_resume(device_t dev)
918 {
919 	struct acpi_pci_link_softc *sc;
920 	ACPI_STATUS status;
921 	int i, routed;
922 
923 	/*
924 	 * If all of our links are routed, then restore the link via _SRS,
925 	 * otherwise, disable the link via _DIS.
926 	 */
927 	ACPI_SERIAL_BEGIN(pci_link);
928 	sc = device_get_softc(dev);
929 	routed = 0;
930 	for (i = 0; i < sc->pl_num_links; i++)
931 		if (sc->pl_links[i].l_routed)
932 			routed++;
933 	if (routed == sc->pl_num_links)
934 		status = acpi_pci_link_route_irqs(dev);
935 	else {
936 		AcpiEvaluateObject(acpi_get_handle(dev), "_DIS", NULL, NULL);
937 		status = AE_OK;
938 	}
939 	ACPI_SERIAL_END(pci_link);
940 	if (ACPI_FAILURE(status))
941 		return (ENXIO);
942 	else
943 		return (0);
944 }
945 
946 /*
947  * Pick an IRQ to use for this unrouted link.
948  */
949 static uint8_t
950 acpi_pci_link_choose_irq(device_t dev, struct link *link)
951 {
952 	char tunable_buffer[64], link_name[5];
953 	u_int8_t best_irq, pos_irq;
954 	int best_weight, pos_weight, i;
955 
956 	KASSERT(!link->l_routed, ("%s: link already routed", __func__));
957 	KASSERT(!PCI_INTERRUPT_VALID(link->l_irq),
958 	    ("%s: link already has an IRQ", __func__));
959 
960 	/* Check for a tunable override. */
961 	if (ACPI_SUCCESS(acpi_short_name(acpi_get_handle(dev), link_name,
962 	    sizeof(link_name)))) {
963 		snprintf(tunable_buffer, sizeof(tunable_buffer),
964 		    "hw.pci.link.%s.%d.irq", link_name, link->l_res_index);
965 		if (getenv_int(tunable_buffer, &i) && PCI_INTERRUPT_VALID(i)) {
966 			if (!link_valid_irq(link, i))
967 				device_printf(dev,
968 				    "Warning, IRQ %d is not listed as valid\n",
969 				    i);
970 			return (i);
971 		}
972 		snprintf(tunable_buffer, sizeof(tunable_buffer),
973 		    "hw.pci.link.%s.irq", link_name);
974 		if (getenv_int(tunable_buffer, &i) && PCI_INTERRUPT_VALID(i)) {
975 			if (!link_valid_irq(link, i))
976 				device_printf(dev,
977 				    "Warning, IRQ %d is not listed as valid\n",
978 				    i);
979 			return (i);
980 		}
981 	}
982 
983 	/*
984 	 * If we have a valid BIOS IRQ, use that.  We trust what the BIOS
985 	 * says it routed over what _CRS says the link thinks is routed.
986 	 */
987 	if (PCI_INTERRUPT_VALID(link->l_bios_irq))
988 		return (link->l_bios_irq);
989 
990 	/*
991 	 * If we don't have a BIOS IRQ but do have a valid IRQ from _CRS,
992 	 * then use that.
993 	 */
994 	if (PCI_INTERRUPT_VALID(link->l_initial_irq))
995 		return (link->l_initial_irq);
996 
997 	/*
998 	 * Ok, we have no useful hints, so we have to pick from the
999 	 * possible IRQs.  For ISA IRQs we only use interrupts that
1000 	 * have already been used by the BIOS.
1001 	 */
1002 	best_irq = PCI_INVALID_IRQ;
1003 	best_weight = INT_MAX;
1004 	for (i = 0; i < link->l_num_irqs; i++) {
1005 		pos_irq = link->l_irqs[i];
1006 		if (pos_irq < NUM_ISA_INTERRUPTS &&
1007 		    (pci_link_bios_isa_irqs & 1 << pos_irq) == 0)
1008 			continue;
1009 		pos_weight = pci_link_interrupt_weights[pos_irq];
1010 		if (pos_weight < best_weight) {
1011 			best_weight = pos_weight;
1012 			best_irq = pos_irq;
1013 		}
1014 	}
1015 
1016 	/*
1017 	 * If this is an ISA IRQ, try using the SCI if it is also an ISA
1018 	 * interrupt as a fallback.
1019 	 */
1020 	if (link->l_isa_irq) {
1021 		pos_irq = AcpiGbl_FADT.SciInterrupt;
1022 		pos_weight = pci_link_interrupt_weights[pos_irq];
1023 		if (pos_weight < best_weight) {
1024 			best_weight = pos_weight;
1025 			best_irq = pos_irq;
1026 		}
1027 	}
1028 
1029 	if (PCI_INTERRUPT_VALID(best_irq)) {
1030 		if (bootverbose)
1031 			device_printf(dev, "Picked IRQ %u with weight %d\n",
1032 			    best_irq, best_weight);
1033 	} else
1034 		device_printf(dev, "Unable to choose an IRQ\n");
1035 	return (best_irq);
1036 }
1037 
1038 int
1039 acpi_pci_link_route_interrupt(device_t dev, int index)
1040 {
1041 	struct link *link;
1042 
1043 	if (acpi_disabled("pci_link"))
1044 		return (PCI_INVALID_IRQ);
1045 
1046 	ACPI_SERIAL_BEGIN(pci_link);
1047 	link = acpi_pci_link_lookup(dev, index);
1048 	if (link == NULL)
1049 		panic("%s: apparently invalid index %d", __func__, index);
1050 
1051 	/*
1052 	 * If this link device is already routed to an interrupt, just return
1053 	 * the interrupt it is routed to.
1054 	 */
1055 	if (link->l_routed) {
1056 		KASSERT(PCI_INTERRUPT_VALID(link->l_irq),
1057 		    ("%s: link is routed but has an invalid IRQ", __func__));
1058 		ACPI_SERIAL_END(pci_link);
1059 		return (link->l_irq);
1060 	}
1061 
1062 	/* Choose an IRQ if we need one. */
1063 	if (!PCI_INTERRUPT_VALID(link->l_irq)) {
1064 		link->l_irq = acpi_pci_link_choose_irq(dev, link);
1065 
1066 		/*
1067 		 * Try to route the interrupt we picked.  If it fails, then
1068 		 * assume the interrupt is not routed.
1069 		 */
1070 		if (PCI_INTERRUPT_VALID(link->l_irq)) {
1071 			acpi_pci_link_route_irqs(dev);
1072 			if (!link->l_routed)
1073 				link->l_irq = PCI_INVALID_IRQ;
1074 		}
1075 	}
1076 	ACPI_SERIAL_END(pci_link);
1077 
1078 	return (link->l_irq);
1079 }
1080 
1081 /*
1082  * This is gross, but we abuse the identify routine to perform one-time
1083  * SYSINIT() style initialization for the driver.
1084  */
1085 static void
1086 acpi_pci_link_identify(driver_t *driver, device_t parent)
1087 {
1088 
1089 	/*
1090 	 * If the SCI is an ISA IRQ, add it to the bitmask of known good
1091 	 * ISA IRQs.
1092 	 *
1093 	 * XXX: If we are using the APIC, the SCI might have been
1094 	 * rerouted to an APIC pin in which case this is invalid.  However,
1095 	 * if we are using the APIC, we also shouldn't be having any PCI
1096 	 * interrupts routed via ISA IRQs, so this is probably ok.
1097 	 */
1098 	if (AcpiGbl_FADT.SciInterrupt < NUM_ISA_INTERRUPTS)
1099 		pci_link_bios_isa_irqs |= (1 << AcpiGbl_FADT.SciInterrupt);
1100 }
1101 
1102 static device_method_t acpi_pci_link_methods[] = {
1103 	/* Device interface */
1104 	DEVMETHOD(device_identify,	acpi_pci_link_identify),
1105 	DEVMETHOD(device_probe,		acpi_pci_link_probe),
1106 	DEVMETHOD(device_attach,	acpi_pci_link_attach),
1107 	DEVMETHOD(device_resume,	acpi_pci_link_resume),
1108 
1109 	{0, 0}
1110 };
1111 
1112 static driver_t acpi_pci_link_driver = {
1113 	"pci_link",
1114 	acpi_pci_link_methods,
1115 	sizeof(struct acpi_pci_link_softc),
1116 };
1117 
1118 static devclass_t pci_link_devclass;
1119 
1120 DRIVER_MODULE(acpi_pci_link, acpi, acpi_pci_link_driver, pci_link_devclass, 0,
1121     0);
1122 MODULE_DEPEND(acpi_pci_link, acpi, 1, 1, 1);
1123