xref: /freebsd/sys/dev/agp/agp_ati.c (revision aa0a1e58)
1 /*-
2  * Copyright (c) 2005 Eric Anholt
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  *
26  * Based on reading the Linux 2.6.8.1 driver by Dave Jones.
27  */
28 
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
31 
32 #include "opt_bus.h"
33 
34 #include <sys/param.h>
35 #include <sys/systm.h>
36 #include <sys/malloc.h>
37 #include <sys/kernel.h>
38 #include <sys/module.h>
39 #include <sys/bus.h>
40 #include <sys/lock.h>
41 #include <sys/mutex.h>
42 #include <sys/proc.h>
43 
44 #include <dev/agp/agppriv.h>
45 #include <dev/agp/agpreg.h>
46 #include <dev/pci/pcivar.h>
47 #include <dev/pci/pcireg.h>
48 
49 #include <vm/vm.h>
50 #include <vm/vm_object.h>
51 #include <vm/pmap.h>
52 #include <machine/bus.h>
53 #include <machine/resource.h>
54 #include <sys/rman.h>
55 
56 MALLOC_DECLARE(M_AGP);
57 
58 #define READ4(off)	bus_space_read_4(sc->bst, sc->bsh, off)
59 #define WRITE4(off,v)	bus_space_write_4(sc->bst, sc->bsh, off, v)
60 
61 struct agp_ati_softc {
62 	struct agp_softc agp;
63 	struct resource *regs;	/* memory mapped control registers */
64 	bus_space_tag_t bst;	/* bus_space tag */
65 	bus_space_handle_t bsh;	/* bus_space handle */
66 	u_int32_t	initial_aperture; /* aperture size at startup */
67 	char		is_rs300;
68 
69 	/* The GATT */
70 	u_int32_t	ag_entries;
71 	u_int32_t      *ag_virtual;	/* virtual address of gatt */
72 	u_int32_t      *ag_vdir;	/* virtual address of page dir */
73 	vm_offset_t	ag_pdir;	/* physical address of page dir */
74 };
75 
76 
77 static const char*
78 agp_ati_match(device_t dev)
79 {
80 	if (pci_get_class(dev) != PCIC_BRIDGE ||
81 	    pci_get_subclass(dev) != PCIS_BRIDGE_HOST)
82 		return NULL;
83 
84 	if (agp_find_caps(dev) == 0)
85 		return NULL;
86 
87 	switch (pci_get_devid(dev)) {
88 	case 0xcab01002:
89 		return ("ATI RS100 AGP bridge");
90 	case 0xcab21002:
91 		return ("ATI RS200 AGP bridge");
92 	case 0xcbb21002:
93 		return ("ATI RS200M AGP bridge");
94 	case 0xcab31002:
95 		return ("ATI RS250 AGP bridge");
96 	case 0x58301002:
97 		return ("ATI RS300_100 AGP bridge");
98 	case 0x58311002:
99 		return ("ATI RS300_133 AGP bridge");
100 	case 0x58321002:
101 		return ("ATI RS300_166 AGP bridge");
102 	case 0x58331002:
103 		return ("ATI RS300_200 AGP bridge");
104 	};
105 
106 	return NULL;
107 }
108 
109 static int
110 agp_ati_probe(device_t dev)
111 {
112 	const char *desc;
113 
114 	desc = agp_ati_match(dev);
115 	if (desc) {
116 		device_set_desc(dev, desc);
117 		return 0;
118 	}
119 
120 	return ENXIO;
121 }
122 
123 static int
124 agp_ati_alloc_gatt(device_t dev)
125 {
126 	struct agp_ati_softc *sc = device_get_softc(dev);
127 	u_int32_t apsize = AGP_GET_APERTURE(dev);
128 	u_int32_t entries = apsize >> AGP_PAGE_SHIFT;
129 	u_int32_t apbase_offset;
130 	int i;
131 
132 	/* Alloc the GATT -- pointers to pages of AGP memory */
133 	sc->ag_entries = entries;
134 	sc->ag_virtual = malloc(entries * sizeof(u_int32_t), M_AGP,
135 	    M_NOWAIT | M_ZERO);
136 	if (sc->ag_virtual == NULL) {
137 		if (bootverbose)
138 			device_printf(dev, "aperture allocation failed\n");
139 		return ENOMEM;
140 	}
141 
142 	/* Alloc the page directory -- pointers to each page of the GATT */
143 	sc->ag_vdir = malloc(AGP_PAGE_SIZE, M_AGP, M_NOWAIT | M_ZERO);
144 	if (sc->ag_vdir == NULL) {
145 		if (bootverbose)
146 			device_printf(dev, "pagedir allocation failed\n");
147 		free(sc->ag_virtual, M_AGP);
148 		return ENOMEM;
149 	}
150 	sc->ag_pdir = vtophys((vm_offset_t)sc->ag_vdir);
151 
152 	apbase_offset = pci_read_config(dev, AGP_APBASE, 4) >> 22;
153 	/* Fill in the pagedir's pointers to GATT pages */
154 	for (i = 0; i < sc->ag_entries / 1024; i++) {
155 		vm_offset_t va;
156 		vm_offset_t pa;
157 
158 		va = ((vm_offset_t)sc->ag_virtual) + i * AGP_PAGE_SIZE;
159 		pa = vtophys(va);
160 		sc->ag_vdir[apbase_offset + i] = pa | 1;
161 	}
162 
163 	/*
164 	 * Make sure the chipset can see everything.
165 	 */
166 	agp_flush_cache();
167 
168 	return 0;
169 }
170 
171 
172 static int
173 agp_ati_attach(device_t dev)
174 {
175 	struct agp_ati_softc *sc = device_get_softc(dev);
176 	int error, rid;
177 	u_int32_t temp;
178 	u_int32_t apsize_reg, agpmode_reg;
179 
180 	error = agp_generic_attach(dev);
181 	if (error)
182 		return error;
183 
184 	switch (pci_get_devid(dev)) {
185 	case 0xcab01002: /* ATI RS100 AGP bridge */
186 	case 0xcab21002: /* ATI RS200 AGP bridge */
187 	case 0xcbb21002: /* ATI RS200M AGP bridge */
188 	case 0xcab31002: /* ATI RS250 AGP bridge */
189 		sc->is_rs300 = 0;
190 		apsize_reg = ATI_RS100_APSIZE;
191 		agpmode_reg = ATI_RS100_IG_AGPMODE;
192 		break;
193 	case 0x58301002: /* ATI RS300_100 AGP bridge */
194 	case 0x58311002: /* ATI RS300_133 AGP bridge */
195 	case 0x58321002: /* ATI RS300_166 AGP bridge */
196 	case 0x58331002: /* ATI RS300_200 AGP bridge */
197 		sc->is_rs300 = 1;
198 		apsize_reg = ATI_RS300_APSIZE;
199 		agpmode_reg = ATI_RS300_IG_AGPMODE;
200 		break;
201 	default:
202 		/* Unknown chipset */
203 		return EINVAL;
204 	};
205 
206 	rid = ATI_GART_MMADDR;
207 	sc->regs = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE);
208 	if (!sc->regs) {
209 		agp_generic_detach(dev);
210 		return ENOMEM;
211 	}
212 
213 	sc->bst = rman_get_bustag(sc->regs);
214 	sc->bsh = rman_get_bushandle(sc->regs);
215 
216 	sc->initial_aperture = AGP_GET_APERTURE(dev);
217 
218 	for (;;) {
219 		if (agp_ati_alloc_gatt(dev) == 0)
220 			break;
221 
222 		/*
223 		 * Probably contigmalloc failure. Try reducing the
224 		 * aperture so that the gatt size reduces.
225 		 */
226 		if (AGP_SET_APERTURE(dev, AGP_GET_APERTURE(dev) / 2))
227 			return ENOMEM;
228 	}
229 
230 	temp = pci_read_config(dev, apsize_reg, 4);
231 	pci_write_config(dev, apsize_reg, temp | 1, 4);
232 
233 	pci_write_config(dev, agpmode_reg, 0x20000, 4);
234 
235 	WRITE4(ATI_GART_FEATURE_ID, 0x00060000);
236 
237 	temp = pci_read_config(dev, 4, 4);	/* XXX: Magic reg# */
238 	pci_write_config(dev, 4, temp | (1 << 14), 4);
239 
240 	WRITE4(ATI_GART_BASE, sc->ag_pdir);
241 
242 	AGP_FLUSH_TLB(dev);
243 
244 	return 0;
245 }
246 
247 static int
248 agp_ati_detach(device_t dev)
249 {
250 	struct agp_ati_softc *sc = device_get_softc(dev);
251 	u_int32_t apsize_reg, temp;
252 
253 	agp_free_cdev(dev);
254 
255 	if (sc->is_rs300)
256 		apsize_reg = ATI_RS300_APSIZE;
257 	else
258 		apsize_reg = ATI_RS100_APSIZE;
259 
260 	/* Clear the GATT base */
261 	WRITE4(ATI_GART_BASE, 0);
262 
263 	/* Put the aperture back the way it started. */
264 	AGP_SET_APERTURE(dev, sc->initial_aperture);
265 
266 	temp = pci_read_config(dev, apsize_reg, 4);
267 	pci_write_config(dev, apsize_reg, temp & ~1, 4);
268 
269 	free(sc->ag_vdir, M_AGP);
270 	free(sc->ag_virtual, M_AGP);
271 
272 	bus_release_resource(dev, SYS_RES_MEMORY, ATI_GART_MMADDR, sc->regs);
273 	agp_free_res(dev);
274 
275 	return 0;
276 }
277 
278 static u_int32_t
279 agp_ati_get_aperture(device_t dev)
280 {
281 	struct agp_ati_softc *sc = device_get_softc(dev);
282 	int size_value;
283 
284 	if (sc->is_rs300)
285 		size_value = pci_read_config(dev, ATI_RS300_APSIZE, 4);
286 	else
287 		size_value = pci_read_config(dev, ATI_RS100_APSIZE, 4);
288 
289 	size_value = (size_value & 0x0000000e) >> 1;
290 	size_value = (32 * 1024 * 1024) << size_value;
291 
292 	return size_value;
293 }
294 
295 static int
296 agp_ati_set_aperture(device_t dev, u_int32_t aperture)
297 {
298 	struct agp_ati_softc *sc = device_get_softc(dev);
299 	int size_value;
300 	u_int32_t apsize_reg;
301 
302 	if (sc->is_rs300)
303 		apsize_reg = ATI_RS300_APSIZE;
304 	else
305 		apsize_reg = ATI_RS100_APSIZE;
306 
307 	size_value = pci_read_config(dev, apsize_reg, 4);
308 
309 	size_value &= ~0x0000000e;
310 	size_value |= (ffs(aperture / (32 * 1024 * 1024)) - 1) << 1;
311 
312 	pci_write_config(dev, apsize_reg, size_value, 4);
313 
314 	return 0;
315 }
316 
317 static int
318 agp_ati_bind_page(device_t dev, vm_offset_t offset, vm_offset_t physical)
319 {
320 	struct agp_ati_softc *sc = device_get_softc(dev);
321 
322 	if (offset >= (sc->ag_entries << AGP_PAGE_SHIFT))
323 		return EINVAL;
324 
325 	sc->ag_virtual[offset >> AGP_PAGE_SHIFT] = physical | 1;
326 
327 	return 0;
328 }
329 
330 static int
331 agp_ati_unbind_page(device_t dev, vm_offset_t offset)
332 {
333 	struct agp_ati_softc *sc = device_get_softc(dev);
334 
335 	if (offset >= (sc->ag_entries << AGP_PAGE_SHIFT))
336 		return EINVAL;
337 
338 	sc->ag_virtual[offset >> AGP_PAGE_SHIFT] = 0;
339 	return 0;
340 }
341 
342 static void
343 agp_ati_flush_tlb(device_t dev)
344 {
345 	struct agp_ati_softc *sc = device_get_softc(dev);
346 
347 	/* Set the cache invalidate bit and wait for the chipset to clear */
348 	WRITE4(ATI_GART_CACHE_CNTRL, 1);
349 	(void)READ4(ATI_GART_CACHE_CNTRL);
350 }
351 
352 static device_method_t agp_ati_methods[] = {
353 	/* Device interface */
354 	DEVMETHOD(device_probe,		agp_ati_probe),
355 	DEVMETHOD(device_attach,	agp_ati_attach),
356 	DEVMETHOD(device_detach,	agp_ati_detach),
357 	DEVMETHOD(device_shutdown,	bus_generic_shutdown),
358 	DEVMETHOD(device_suspend,	bus_generic_suspend),
359 	DEVMETHOD(device_resume,	bus_generic_resume),
360 
361 	/* AGP interface */
362 	DEVMETHOD(agp_get_aperture,	agp_ati_get_aperture),
363 	DEVMETHOD(agp_set_aperture,	agp_ati_set_aperture),
364 	DEVMETHOD(agp_bind_page,	agp_ati_bind_page),
365 	DEVMETHOD(agp_unbind_page,	agp_ati_unbind_page),
366 	DEVMETHOD(agp_flush_tlb,	agp_ati_flush_tlb),
367 	DEVMETHOD(agp_enable,		agp_generic_enable),
368 	DEVMETHOD(agp_alloc_memory,	agp_generic_alloc_memory),
369 	DEVMETHOD(agp_free_memory,	agp_generic_free_memory),
370 	DEVMETHOD(agp_bind_memory,	agp_generic_bind_memory),
371 	DEVMETHOD(agp_unbind_memory,	agp_generic_unbind_memory),
372 
373 	{ 0, 0 }
374 };
375 
376 static driver_t agp_ati_driver = {
377 	"agp",
378 	agp_ati_methods,
379 	sizeof(struct agp_ati_softc),
380 };
381 
382 static devclass_t agp_devclass;
383 
384 DRIVER_MODULE(agp_ati, hostb, agp_ati_driver, agp_devclass, 0, 0);
385 MODULE_DEPEND(agp_ati, agp, 1, 1, 1);
386 MODULE_DEPEND(agp_ati, pci, 1, 1, 1);
387