xref: /freebsd/sys/dev/agp/agp_via.c (revision 39beb93c)
1 /*-
2  * Copyright (c) 2000 Doug Rabson
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  */
26 
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
29 
30 #include "opt_bus.h"
31 
32 #include <sys/param.h>
33 #include <sys/systm.h>
34 #include <sys/malloc.h>
35 #include <sys/kernel.h>
36 #include <sys/module.h>
37 #include <sys/bus.h>
38 #include <sys/lock.h>
39 #include <sys/mutex.h>
40 #include <sys/proc.h>
41 
42 #include <dev/agp/agppriv.h>
43 #include <dev/agp/agpreg.h>
44 #include <dev/pci/pcivar.h>
45 #include <dev/pci/pcireg.h>
46 
47 #include <vm/vm.h>
48 #include <vm/vm_object.h>
49 #include <vm/pmap.h>
50 
51 #define	REG_GARTCTRL	0
52 #define	REG_APSIZE	1
53 #define	REG_ATTBASE	2
54 
55 struct agp_via_softc {
56 	struct agp_softc agp;
57 	u_int32_t	initial_aperture; /* aperture size at startup */
58 	struct agp_gatt *gatt;
59 	int		*regs;
60 };
61 
62 static int via_v2_regs[] = { AGP_VIA_GARTCTRL, AGP_VIA_APSIZE,
63     AGP_VIA_ATTBASE };
64 static int via_v3_regs[] = { AGP3_VIA_GARTCTRL, AGP3_VIA_APSIZE,
65     AGP3_VIA_ATTBASE };
66 
67 static const char*
68 agp_via_match(device_t dev)
69 {
70 	if (pci_get_class(dev) != PCIC_BRIDGE
71 	    || pci_get_subclass(dev) != PCIS_BRIDGE_HOST)
72 		return NULL;
73 
74 	if (agp_find_caps(dev) == 0)
75 		return NULL;
76 
77 	switch (pci_get_devid(dev)) {
78 	case 0x01981106:
79 		return ("VIA 8763 (P4X600) host to PCI bridge");
80 	case 0x02591106:
81 		return ("VIA PM800/PN800/PM880/PN880 host to PCI bridge");
82 	case 0x02691106:
83 		return ("VIA KT880 host to PCI bridge");
84 	case 0x02961106:
85 		return ("VIA 3296 (P4M800) host to PCI bridge");
86 	case 0x03051106:
87 		return ("VIA 82C8363 (Apollo KT133x/KM133) host to PCI bridge");
88 	case 0x03141106:
89 		return ("VIA 3314 (P4M800CE) host to PCI bridge");
90 	case 0x03241106:
91 		return ("VIA VT3324 (CX700) host to PCI bridge");
92 	case 0x03271106:
93 		return ("VIA 3327 (P4M890) host to PCI bridge");
94 	case 0x03641106:
95 		return ("VIA 3364 (P4M900) host to PCI bridge");
96 	case 0x03911106:
97 		return ("VIA 8371 (Apollo KX133) host to PCI bridge");
98 	case 0x05011106:
99 		return ("VIA 8501 (Apollo MVP4) host to PCI bridge");
100 	case 0x05971106:
101 		return ("VIA 82C597 (Apollo VP3) host to PCI bridge");
102 	case 0x05981106:
103 		return ("VIA 82C598 (Apollo MVP3) host to PCI bridge");
104 	case 0x06011106:
105 		return ("VIA 8601 (Apollo ProMedia/PLE133Ta) host to PCI bridge");
106 	case 0x06051106:
107 		return ("VIA 82C694X (Apollo Pro 133A) host to PCI bridge");
108 	case 0x06911106:
109 		return ("VIA 82C691 (Apollo Pro) host to PCI bridge");
110 	case 0x30911106:
111 		return ("VIA 8633 (Pro 266) host to PCI bridge");
112 	case 0x30991106:
113 		return ("VIA 8367 (KT266/KY266x/KT333) host to PCI bridge");
114 	case 0x31011106:
115 		return ("VIA 8653 (Pro266T) host to PCI bridge");
116 	case 0x31121106:
117 		return ("VIA 8361 (KLE133) host to PCI bridge");
118 	case 0x31161106:
119 		return ("VIA XM266 (PM266/KM266) host to PCI bridge");
120 	case 0x31231106:
121 		return ("VIA 862x (CLE266) host to PCI bridge");
122 	case 0x31281106:
123 		return ("VIA 8753 (P4X266) host to PCI bridge");
124 	case 0x31481106:
125 		return ("VIA 8703 (P4M266x/P4N266) host to PCI bridge");
126 	case 0x31561106:
127 		return ("VIA XN266 (Apollo Pro266) host to PCI bridge");
128 	case 0x31681106:
129 		return ("VIA 8754 (PT800) host to PCI bridge");
130 	case 0x31891106:
131 		return ("VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge");
132 	case 0x32051106:
133 		return ("VIA 8235/8237 (Apollo KM400/KM400A) host to PCI bridge");
134 	case 0x32081106:
135 		return ("VIA 8783 (PT890) host to PCI bridge");
136 	case 0x32581106:
137 		return ("VIA PT880 host to PCI bridge");
138 	case 0xb1981106:
139 		return ("VIA VT83xx/VT87xx/KTxxx/Px8xx host to PCI bridge");
140 	};
141 
142 	return NULL;
143 }
144 
145 static int
146 agp_via_probe(device_t dev)
147 {
148 	const char *desc;
149 
150 	if (resource_disabled("agp", device_get_unit(dev)))
151 		return (ENXIO);
152 	desc = agp_via_match(dev);
153 	if (desc) {
154 		device_set_desc(dev, desc);
155 		return BUS_PROBE_DEFAULT;
156 	}
157 
158 	return ENXIO;
159 }
160 
161 static int
162 agp_via_attach(device_t dev)
163 {
164 	struct agp_via_softc *sc = device_get_softc(dev);
165 	struct agp_gatt *gatt;
166 	int error;
167 	u_int32_t agpsel;
168 
169 	/* XXX: This should be keying off of whether the bridge is AGP3 capable,
170 	 * rather than a bunch of device ids for chipsets that happen to do 8x.
171 	 */
172 	switch (pci_get_devid(dev)) {
173 	case 0x01981106:
174 	case 0x02591106:
175 	case 0x02691106:
176 	case 0x02961106:
177 	case 0x03141106:
178 	case 0x03241106:
179 	case 0x03271106:
180 	case 0x03641106:
181 	case 0x31231106:
182 	case 0x31681106:
183 	case 0x31891106:
184 	case 0x32051106:
185 	case 0x32581106:
186 	case 0xb1981106:
187 		/* The newer VIA chipsets will select the AGP version based on
188 		 * what AGP versions the card supports.  We still have to
189 		 * program it using the v2 registers if it has chosen to use
190 		 * compatibility mode.
191 		 */
192 		agpsel = pci_read_config(dev, AGP_VIA_AGPSEL, 1);
193 		if ((agpsel & (1 << 1)) == 0)
194 			sc->regs = via_v3_regs;
195 		else
196 			sc->regs = via_v2_regs;
197 		break;
198 	default:
199 		sc->regs = via_v2_regs;
200 		break;
201 	}
202 
203 	error = agp_generic_attach(dev);
204 	if (error)
205 		return error;
206 
207 	sc->initial_aperture = AGP_GET_APERTURE(dev);
208 
209 	for (;;) {
210 		gatt = agp_alloc_gatt(dev);
211 		if (gatt)
212 			break;
213 
214 		/*
215 		 * Probably contigmalloc failure. Try reducing the
216 		 * aperture so that the gatt size reduces.
217 		 */
218 		if (AGP_SET_APERTURE(dev, AGP_GET_APERTURE(dev) / 2)) {
219 			agp_generic_detach(dev);
220 			return ENOMEM;
221 		}
222 	}
223 	sc->gatt = gatt;
224 
225 	if (sc->regs == via_v2_regs) {
226 		/* Install the gatt. */
227 		pci_write_config(dev, sc->regs[REG_ATTBASE], gatt->ag_physical | 3, 4);
228 
229 		/* Enable the aperture. */
230 		pci_write_config(dev, sc->regs[REG_GARTCTRL], 0x0f, 4);
231 	} else {
232 		u_int32_t gartctrl;
233 
234 		/* Install the gatt. */
235 		pci_write_config(dev, sc->regs[REG_ATTBASE], gatt->ag_physical, 4);
236 
237 		/* Enable the aperture. */
238 		gartctrl = pci_read_config(dev, sc->regs[REG_ATTBASE], 4);
239 		pci_write_config(dev, sc->regs[REG_GARTCTRL], gartctrl | (3 << 7), 4);
240 	}
241 
242 	device_printf(dev, "aperture size is %dM\n",
243 		sc->initial_aperture / 1024 / 1024);
244 
245 	return 0;
246 }
247 
248 static int
249 agp_via_detach(device_t dev)
250 {
251 	struct agp_via_softc *sc = device_get_softc(dev);
252 
253 	agp_free_cdev(dev);
254 
255 	pci_write_config(dev, sc->regs[REG_GARTCTRL], 0, 4);
256 	pci_write_config(dev, sc->regs[REG_ATTBASE], 0, 4);
257 	AGP_SET_APERTURE(dev, sc->initial_aperture);
258 	agp_free_gatt(sc->gatt);
259 	agp_free_res(dev);
260 
261 	return 0;
262 }
263 
264 static u_int32_t
265 agp_via_get_aperture(device_t dev)
266 {
267 	struct agp_via_softc *sc = device_get_softc(dev);
268 	u_int32_t apsize;
269 
270 	if (sc->regs == via_v2_regs) {
271 		apsize = pci_read_config(dev, sc->regs[REG_APSIZE], 1) & 0x1f;
272 
273 		/*
274 		 * The size is determined by the number of low bits of
275 		 * register APBASE which are forced to zero. The low 20 bits
276 		 * are always forced to zero and each zero bit in the apsize
277 		 * field just read forces the corresponding bit in the 27:20
278 		 * to be zero. We calculate the aperture size accordingly.
279 		 */
280 		return (((apsize ^ 0xff) << 20) | ((1 << 20) - 1)) + 1;
281 	} else {
282 		apsize = pci_read_config(dev, sc->regs[REG_APSIZE], 2) & 0xfff;
283 		switch (apsize) {
284 		case 0x800:
285 			return 0x80000000;
286 		case 0xc00:
287 			return 0x40000000;
288 		case 0xe00:
289 			return 0x20000000;
290 		case 0xf00:
291 			return 0x10000000;
292 		case 0xf20:
293 			return 0x08000000;
294 		case 0xf30:
295 			return 0x04000000;
296 		case 0xf38:
297 			return 0x02000000;
298 		default:
299 			device_printf(dev, "Invalid aperture setting 0x%x",
300 			    pci_read_config(dev, sc->regs[REG_APSIZE], 2));
301 			return 0;
302 		}
303 	}
304 }
305 
306 static int
307 agp_via_set_aperture(device_t dev, u_int32_t aperture)
308 {
309 	struct agp_via_softc *sc = device_get_softc(dev);
310 	u_int32_t apsize, key, val;
311 
312 	if (sc->regs == via_v2_regs) {
313 		/*
314 		 * Reverse the magic from get_aperture.
315 		 */
316 		apsize = ((aperture - 1) >> 20) ^ 0xff;
317 
318 		/*
319 	 	 * Double check for sanity.
320 	 	 */
321 		if ((((apsize ^ 0xff) << 20) | ((1 << 20) - 1)) + 1 != aperture)
322 			return EINVAL;
323 
324 		pci_write_config(dev, sc->regs[REG_APSIZE], apsize, 1);
325 	} else {
326 		switch (aperture) {
327 		case 0x80000000:
328 			key = 0x800;
329 			break;
330 		case 0x40000000:
331 			key = 0xc00;
332 			break;
333 		case 0x20000000:
334 			key = 0xe00;
335 			break;
336 		case 0x10000000:
337 			key = 0xf00;
338 			break;
339 		case 0x08000000:
340 			key = 0xf20;
341 			break;
342 		case 0x04000000:
343 			key = 0xf30;
344 			break;
345 		case 0x02000000:
346 			key = 0xf38;
347 			break;
348 		default:
349 			device_printf(dev, "Invalid aperture size (%dMb)\n",
350 			    aperture / 1024 / 1024);
351 			return EINVAL;
352 		}
353 		val = pci_read_config(dev, sc->regs[REG_APSIZE], 2);
354 		pci_write_config(dev, sc->regs[REG_APSIZE],
355 		    ((val & ~0xfff) | key), 2);
356 	}
357 	return 0;
358 }
359 
360 static int
361 agp_via_bind_page(device_t dev, int offset, vm_offset_t physical)
362 {
363 	struct agp_via_softc *sc = device_get_softc(dev);
364 
365 	if (offset < 0 || offset >= (sc->gatt->ag_entries << AGP_PAGE_SHIFT))
366 		return EINVAL;
367 
368 	sc->gatt->ag_virtual[offset >> AGP_PAGE_SHIFT] = physical;
369 	return 0;
370 }
371 
372 static int
373 agp_via_unbind_page(device_t dev, int offset)
374 {
375 	struct agp_via_softc *sc = device_get_softc(dev);
376 
377 	if (offset < 0 || offset >= (sc->gatt->ag_entries << AGP_PAGE_SHIFT))
378 		return EINVAL;
379 
380 	sc->gatt->ag_virtual[offset >> AGP_PAGE_SHIFT] = 0;
381 	return 0;
382 }
383 
384 static void
385 agp_via_flush_tlb(device_t dev)
386 {
387 	struct agp_via_softc *sc = device_get_softc(dev);
388 	u_int32_t gartctrl;
389 
390 	if (sc->regs == via_v2_regs) {
391 		pci_write_config(dev, sc->regs[REG_GARTCTRL], 0x8f, 4);
392 		pci_write_config(dev, sc->regs[REG_GARTCTRL], 0x0f, 4);
393 	} else {
394 		gartctrl = pci_read_config(dev, sc->regs[REG_GARTCTRL], 4);
395 		pci_write_config(dev, sc->regs[REG_GARTCTRL], gartctrl &
396 		    ~(1 << 7), 4);
397 		pci_write_config(dev, sc->regs[REG_GARTCTRL], gartctrl, 4);
398 	}
399 
400 }
401 
402 static device_method_t agp_via_methods[] = {
403 	/* Device interface */
404 	DEVMETHOD(device_probe,		agp_via_probe),
405 	DEVMETHOD(device_attach,	agp_via_attach),
406 	DEVMETHOD(device_detach,	agp_via_detach),
407 	DEVMETHOD(device_shutdown,	bus_generic_shutdown),
408 	DEVMETHOD(device_suspend,	bus_generic_suspend),
409 	DEVMETHOD(device_resume,	bus_generic_resume),
410 
411 	/* AGP interface */
412 	DEVMETHOD(agp_get_aperture,	agp_via_get_aperture),
413 	DEVMETHOD(agp_set_aperture,	agp_via_set_aperture),
414 	DEVMETHOD(agp_bind_page,	agp_via_bind_page),
415 	DEVMETHOD(agp_unbind_page,	agp_via_unbind_page),
416 	DEVMETHOD(agp_flush_tlb,	agp_via_flush_tlb),
417 	DEVMETHOD(agp_enable,		agp_generic_enable),
418 	DEVMETHOD(agp_alloc_memory,	agp_generic_alloc_memory),
419 	DEVMETHOD(agp_free_memory,	agp_generic_free_memory),
420 	DEVMETHOD(agp_bind_memory,	agp_generic_bind_memory),
421 	DEVMETHOD(agp_unbind_memory,	agp_generic_unbind_memory),
422 
423 	{ 0, 0 }
424 };
425 
426 static driver_t agp_via_driver = {
427 	"agp",
428 	agp_via_methods,
429 	sizeof(struct agp_via_softc),
430 };
431 
432 static devclass_t agp_devclass;
433 
434 DRIVER_MODULE(agp_via, hostb, agp_via_driver, agp_devclass, 0, 0);
435 MODULE_DEPEND(agp_via, agp, 1, 1, 1);
436 MODULE_DEPEND(agp_via, pci, 1, 1, 1);
437