1 /*- 2 * Core routines and tables shareable across OS platforms. 3 * 4 * SPDX-License-Identifier: BSD-3-Clause 5 * 6 * Copyright (c) 1994-2002, 2004 Justin T. Gibbs. 7 * Copyright (c) 2000-2003 Adaptec Inc. 8 * All rights reserved. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions, and the following disclaimer, 15 * without modification. 16 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 17 * substantially similar to the "NO WARRANTY" disclaimer below 18 * ("Disclaimer") and any redistribution must be conditioned upon 19 * including a substantially similar Disclaimer requirement for further 20 * binary redistribution. 21 * 3. Neither the names of the above-listed copyright holders nor the names 22 * of any contributors may be used to endorse or promote products derived 23 * from this software without specific prior written permission. 24 * 25 * Alternatively, this software may be distributed under the terms of the 26 * GNU General Public License ("GPL") version 2 as published by the Free 27 * Software Foundation. 28 * 29 * NO WARRANTY 30 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 31 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 32 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 33 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 34 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 35 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 36 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 37 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 38 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 39 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 40 * POSSIBILITY OF SUCH DAMAGES. 41 * 42 * $Id: //depot/aic7xxx/aic7xxx/aic79xx.c#246 $ 43 */ 44 45 #ifdef __linux__ 46 #include "aic79xx_osm.h" 47 #include "aic79xx_inline.h" 48 #include "aicasm/aicasm_insformat.h" 49 #else 50 #include <sys/cdefs.h> 51 __FBSDID("$FreeBSD$"); 52 #include <dev/aic7xxx/aic79xx_osm.h> 53 #include <dev/aic7xxx/aic79xx_inline.h> 54 #include <dev/aic7xxx/aicasm/aicasm_insformat.h> 55 #endif 56 57 /******************************** Globals *************************************/ 58 struct ahd_softc_tailq ahd_tailq = TAILQ_HEAD_INITIALIZER(ahd_tailq); 59 uint32_t ahd_attach_to_HostRAID_controllers = 1; 60 61 /***************************** Lookup Tables **********************************/ 62 char *ahd_chip_names[] = 63 { 64 "NONE", 65 "aic7901", 66 "aic7902", 67 "aic7901A" 68 }; 69 70 /* 71 * Hardware error codes. 72 */ 73 struct ahd_hard_error_entry { 74 uint8_t errno; 75 char *errmesg; 76 }; 77 78 static struct ahd_hard_error_entry ahd_hard_errors[] = { 79 { DSCTMOUT, "Discard Timer has timed out" }, 80 { ILLOPCODE, "Illegal Opcode in sequencer program" }, 81 { SQPARERR, "Sequencer Parity Error" }, 82 { DPARERR, "Data-path Parity Error" }, 83 { MPARERR, "Scratch or SCB Memory Parity Error" }, 84 { CIOPARERR, "CIOBUS Parity Error" }, 85 }; 86 static const u_int num_errors = NUM_ELEMENTS(ahd_hard_errors); 87 88 static struct ahd_phase_table_entry ahd_phase_table[] = 89 { 90 { P_DATAOUT, MSG_NOOP, "in Data-out phase" }, 91 { P_DATAIN, MSG_INITIATOR_DET_ERR, "in Data-in phase" }, 92 { P_DATAOUT_DT, MSG_NOOP, "in DT Data-out phase" }, 93 { P_DATAIN_DT, MSG_INITIATOR_DET_ERR, "in DT Data-in phase" }, 94 { P_COMMAND, MSG_NOOP, "in Command phase" }, 95 { P_MESGOUT, MSG_NOOP, "in Message-out phase" }, 96 { P_STATUS, MSG_INITIATOR_DET_ERR, "in Status phase" }, 97 { P_MESGIN, MSG_PARITY_ERROR, "in Message-in phase" }, 98 { P_BUSFREE, MSG_NOOP, "while idle" }, 99 { 0, MSG_NOOP, "in unknown phase" } 100 }; 101 102 /* 103 * In most cases we only wish to itterate over real phases, so 104 * exclude the last element from the count. 105 */ 106 static const u_int num_phases = NUM_ELEMENTS(ahd_phase_table) - 1; 107 108 /* Our Sequencer Program */ 109 #include "aic79xx_seq.h" 110 111 /**************************** Function Declarations ***************************/ 112 static void ahd_handle_transmission_error(struct ahd_softc *ahd); 113 static void ahd_handle_lqiphase_error(struct ahd_softc *ahd, 114 u_int lqistat1); 115 static int ahd_handle_pkt_busfree(struct ahd_softc *ahd, 116 u_int busfreetime); 117 static int ahd_handle_nonpkt_busfree(struct ahd_softc *ahd); 118 static void ahd_handle_proto_violation(struct ahd_softc *ahd); 119 static void ahd_force_renegotiation(struct ahd_softc *ahd, 120 struct ahd_devinfo *devinfo); 121 122 static struct ahd_tmode_tstate* 123 ahd_alloc_tstate(struct ahd_softc *ahd, 124 u_int scsi_id, char channel); 125 #ifdef AHD_TARGET_MODE 126 static void ahd_free_tstate(struct ahd_softc *ahd, 127 u_int scsi_id, char channel, int force); 128 #endif 129 static void ahd_devlimited_syncrate(struct ahd_softc *ahd, 130 struct ahd_initiator_tinfo *, 131 u_int *period, 132 u_int *ppr_options, 133 role_t role); 134 static void ahd_update_neg_table(struct ahd_softc *ahd, 135 struct ahd_devinfo *devinfo, 136 struct ahd_transinfo *tinfo); 137 static void ahd_update_pending_scbs(struct ahd_softc *ahd); 138 static void ahd_fetch_devinfo(struct ahd_softc *ahd, 139 struct ahd_devinfo *devinfo); 140 static void ahd_scb_devinfo(struct ahd_softc *ahd, 141 struct ahd_devinfo *devinfo, 142 struct scb *scb); 143 static void ahd_setup_initiator_msgout(struct ahd_softc *ahd, 144 struct ahd_devinfo *devinfo, 145 struct scb *scb); 146 static void ahd_build_transfer_msg(struct ahd_softc *ahd, 147 struct ahd_devinfo *devinfo); 148 static void ahd_construct_sdtr(struct ahd_softc *ahd, 149 struct ahd_devinfo *devinfo, 150 u_int period, u_int offset); 151 static void ahd_construct_wdtr(struct ahd_softc *ahd, 152 struct ahd_devinfo *devinfo, 153 u_int bus_width); 154 static void ahd_construct_ppr(struct ahd_softc *ahd, 155 struct ahd_devinfo *devinfo, 156 u_int period, u_int offset, 157 u_int bus_width, u_int ppr_options); 158 static void ahd_clear_msg_state(struct ahd_softc *ahd); 159 static void ahd_handle_message_phase(struct ahd_softc *ahd); 160 typedef enum { 161 AHDMSG_1B, 162 AHDMSG_2B, 163 AHDMSG_EXT 164 } ahd_msgtype; 165 static int ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type, 166 u_int msgval, int full); 167 static int ahd_parse_msg(struct ahd_softc *ahd, 168 struct ahd_devinfo *devinfo); 169 static int ahd_handle_msg_reject(struct ahd_softc *ahd, 170 struct ahd_devinfo *devinfo); 171 static void ahd_handle_ign_wide_residue(struct ahd_softc *ahd, 172 struct ahd_devinfo *devinfo); 173 static void ahd_reinitialize_dataptrs(struct ahd_softc *ahd); 174 static void ahd_handle_devreset(struct ahd_softc *ahd, 175 struct ahd_devinfo *devinfo, 176 u_int lun, cam_status status, 177 char *message, int verbose_level); 178 #ifdef AHD_TARGET_MODE 179 static void ahd_setup_target_msgin(struct ahd_softc *ahd, 180 struct ahd_devinfo *devinfo, 181 struct scb *scb); 182 #endif 183 184 static u_int ahd_sglist_size(struct ahd_softc *ahd); 185 static u_int ahd_sglist_allocsize(struct ahd_softc *ahd); 186 static bus_dmamap_callback_t 187 ahd_dmamap_cb; 188 static void ahd_initialize_hscbs(struct ahd_softc *ahd); 189 static int ahd_init_scbdata(struct ahd_softc *ahd); 190 static void ahd_fini_scbdata(struct ahd_softc *ahd); 191 static void ahd_setup_iocell_workaround(struct ahd_softc *ahd); 192 static void ahd_iocell_first_selection(struct ahd_softc *ahd); 193 static void ahd_add_col_list(struct ahd_softc *ahd, 194 struct scb *scb, u_int col_idx); 195 static void ahd_rem_col_list(struct ahd_softc *ahd, 196 struct scb *scb); 197 static void ahd_chip_init(struct ahd_softc *ahd); 198 static void ahd_qinfifo_requeue(struct ahd_softc *ahd, 199 struct scb *prev_scb, 200 struct scb *scb); 201 static int ahd_qinfifo_count(struct ahd_softc *ahd); 202 static int ahd_search_scb_list(struct ahd_softc *ahd, int target, 203 char channel, int lun, u_int tag, 204 role_t role, uint32_t status, 205 ahd_search_action action, 206 u_int *list_head, u_int *list_tail, 207 u_int tid); 208 static void ahd_stitch_tid_list(struct ahd_softc *ahd, 209 u_int tid_prev, u_int tid_cur, 210 u_int tid_next); 211 static void ahd_add_scb_to_free_list(struct ahd_softc *ahd, 212 u_int scbid); 213 static u_int ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid, 214 u_int prev, u_int next, u_int tid); 215 static void ahd_reset_current_bus(struct ahd_softc *ahd); 216 static ahd_callback_t ahd_reset_poll; 217 static ahd_callback_t ahd_stat_timer; 218 #ifdef AHD_DUMP_SEQ 219 static void ahd_dumpseq(struct ahd_softc *ahd); 220 #endif 221 static void ahd_loadseq(struct ahd_softc *ahd); 222 static int ahd_check_patch(struct ahd_softc *ahd, 223 struct patch **start_patch, 224 u_int start_instr, u_int *skip_addr); 225 static u_int ahd_resolve_seqaddr(struct ahd_softc *ahd, 226 u_int address); 227 static void ahd_download_instr(struct ahd_softc *ahd, 228 u_int instrptr, uint8_t *dconsts); 229 static int ahd_probe_stack_size(struct ahd_softc *ahd); 230 static int ahd_other_scb_timeout(struct ahd_softc *ahd, 231 struct scb *scb, 232 struct scb *other_scb); 233 static int ahd_scb_active_in_fifo(struct ahd_softc *ahd, 234 struct scb *scb); 235 static void ahd_run_data_fifo(struct ahd_softc *ahd, 236 struct scb *scb); 237 238 #ifdef AHD_TARGET_MODE 239 static void ahd_queue_lstate_event(struct ahd_softc *ahd, 240 struct ahd_tmode_lstate *lstate, 241 u_int initiator_id, 242 u_int event_type, 243 u_int event_arg); 244 static void ahd_update_scsiid(struct ahd_softc *ahd, 245 u_int targid_mask); 246 static int ahd_handle_target_cmd(struct ahd_softc *ahd, 247 struct target_cmd *cmd); 248 #endif 249 250 /******************************** Private Inlines *****************************/ 251 static __inline void ahd_assert_atn(struct ahd_softc *ahd); 252 static __inline int ahd_currently_packetized(struct ahd_softc *ahd); 253 static __inline int ahd_set_active_fifo(struct ahd_softc *ahd); 254 255 static __inline void 256 ahd_assert_atn(struct ahd_softc *ahd) 257 { 258 ahd_outb(ahd, SCSISIGO, ATNO); 259 } 260 261 /* 262 * Determine if the current connection has a packetized 263 * agreement. This does not necessarily mean that we 264 * are currently in a packetized transfer. We could 265 * just as easily be sending or receiving a message. 266 */ 267 static __inline int 268 ahd_currently_packetized(struct ahd_softc *ahd) 269 { 270 ahd_mode_state saved_modes; 271 int packetized; 272 273 saved_modes = ahd_save_modes(ahd); 274 if ((ahd->bugs & AHD_PKTIZED_STATUS_BUG) != 0) { 275 /* 276 * The packetized bit refers to the last 277 * connection, not the current one. Check 278 * for non-zero LQISTATE instead. 279 */ 280 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 281 packetized = ahd_inb(ahd, LQISTATE) != 0; 282 } else { 283 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 284 packetized = ahd_inb(ahd, LQISTAT2) & PACKETIZED; 285 } 286 ahd_restore_modes(ahd, saved_modes); 287 return (packetized); 288 } 289 290 static __inline int 291 ahd_set_active_fifo(struct ahd_softc *ahd) 292 { 293 u_int active_fifo; 294 295 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 296 active_fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO; 297 switch (active_fifo) { 298 case 0: 299 case 1: 300 ahd_set_modes(ahd, active_fifo, active_fifo); 301 return (1); 302 default: 303 return (0); 304 } 305 } 306 307 /************************* Sequencer Execution Control ************************/ 308 /* 309 * Restart the sequencer program from address zero 310 */ 311 void 312 ahd_restart(struct ahd_softc *ahd) 313 { 314 315 ahd_pause(ahd); 316 317 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 318 319 /* No more pending messages */ 320 ahd_clear_msg_state(ahd); 321 ahd_outb(ahd, SCSISIGO, 0); /* De-assert BSY */ 322 ahd_outb(ahd, MSG_OUT, MSG_NOOP); /* No message to send */ 323 ahd_outb(ahd, SXFRCTL1, ahd_inb(ahd, SXFRCTL1) & ~BITBUCKET); 324 ahd_outb(ahd, SEQINTCTL, 0); 325 ahd_outb(ahd, LASTPHASE, P_BUSFREE); 326 ahd_outb(ahd, SEQ_FLAGS, 0); 327 ahd_outb(ahd, SAVED_SCSIID, 0xFF); 328 ahd_outb(ahd, SAVED_LUN, 0xFF); 329 330 /* 331 * Ensure that the sequencer's idea of TQINPOS 332 * matches our own. The sequencer increments TQINPOS 333 * only after it sees a DMA complete and a reset could 334 * occur before the increment leaving the kernel to believe 335 * the command arrived but the sequencer to not. 336 */ 337 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext); 338 339 /* Always allow reselection */ 340 ahd_outb(ahd, SCSISEQ1, 341 ahd_inb(ahd, SCSISEQ_TEMPLATE) & (ENSELI|ENRSELI|ENAUTOATNP)); 342 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 343 344 /* 345 * Clear any pending sequencer interrupt. It is no 346 * longer relevant since we're resetting the Program 347 * Counter. 348 */ 349 ahd_outb(ahd, CLRINT, CLRSEQINT); 350 351 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET); 352 ahd_unpause(ahd); 353 } 354 355 void 356 ahd_clear_fifo(struct ahd_softc *ahd, u_int fifo) 357 { 358 ahd_mode_state saved_modes; 359 360 #ifdef AHD_DEBUG 361 if ((ahd_debug & AHD_SHOW_FIFOS) != 0) 362 printf("%s: Clearing FIFO %d\n", ahd_name(ahd), fifo); 363 #endif 364 saved_modes = ahd_save_modes(ahd); 365 ahd_set_modes(ahd, fifo, fifo); 366 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT); 367 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) 368 ahd_outb(ahd, CCSGCTL, CCSGRESET); 369 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 370 ahd_outb(ahd, SG_STATE, 0); 371 ahd_restore_modes(ahd, saved_modes); 372 } 373 374 /************************* Input/Output Queues ********************************/ 375 /* 376 * Flush and completed commands that are sitting in the command 377 * complete queues down on the chip but have yet to be dma'ed back up. 378 */ 379 void 380 ahd_flush_qoutfifo(struct ahd_softc *ahd) 381 { 382 struct scb *scb; 383 ahd_mode_state saved_modes; 384 u_int saved_scbptr; 385 u_int ccscbctl; 386 u_int scbid; 387 u_int next_scbid; 388 389 saved_modes = ahd_save_modes(ahd); 390 391 /* 392 * Flush the good status FIFO for completed packetized commands. 393 */ 394 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 395 saved_scbptr = ahd_get_scbptr(ahd); 396 while ((ahd_inb(ahd, LQISTAT2) & LQIGSAVAIL) != 0) { 397 u_int fifo_mode; 398 u_int i; 399 400 scbid = ahd_inw(ahd, GSFIFO); 401 scb = ahd_lookup_scb(ahd, scbid); 402 if (scb == NULL) { 403 printf("%s: Warning - GSFIFO SCB %d invalid\n", 404 ahd_name(ahd), scbid); 405 AHD_CORRECTABLE_ERROR(ahd); 406 continue; 407 } 408 /* 409 * Determine if this transaction is still active in 410 * any FIFO. If it is, we must flush that FIFO to 411 * the host before completing the command. 412 */ 413 fifo_mode = 0; 414 rescan_fifos: 415 for (i = 0; i < 2; i++) { 416 /* Toggle to the other mode. */ 417 fifo_mode ^= 1; 418 ahd_set_modes(ahd, fifo_mode, fifo_mode); 419 420 if (ahd_scb_active_in_fifo(ahd, scb) == 0) 421 continue; 422 423 ahd_run_data_fifo(ahd, scb); 424 425 /* 426 * Running this FIFO may cause a CFG4DATA for 427 * this same transaction to assert in the other 428 * FIFO or a new snapshot SAVEPTRS interrupt 429 * in this FIFO. Even running a FIFO may not 430 * clear the transaction if we are still waiting 431 * for data to drain to the host. We must loop 432 * until the transaction is not active in either 433 * FIFO just to be sure. Reset our loop counter 434 * so we will visit both FIFOs again before 435 * declaring this transaction finished. We 436 * also delay a bit so that status has a chance 437 * to change before we look at this FIFO again. 438 */ 439 aic_delay(200); 440 goto rescan_fifos; 441 } 442 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 443 ahd_set_scbptr(ahd, scbid); 444 if ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_LIST_NULL) == 0 445 && ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_FULL_RESID) != 0 446 || (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR) 447 & SG_LIST_NULL) != 0)) { 448 u_int comp_head; 449 450 /* 451 * The transfer completed with a residual. 452 * Place this SCB on the complete DMA list 453 * so that we update our in-core copy of the 454 * SCB before completing the command. 455 */ 456 ahd_outb(ahd, SCB_SCSI_STATUS, 0); 457 ahd_outb(ahd, SCB_SGPTR, 458 ahd_inb_scbram(ahd, SCB_SGPTR) 459 | SG_STATUS_VALID); 460 ahd_outw(ahd, SCB_TAG, scbid); 461 ahd_outw(ahd, SCB_NEXT_COMPLETE, SCB_LIST_NULL); 462 comp_head = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 463 if (SCBID_IS_NULL(comp_head)) { 464 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, scbid); 465 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid); 466 } else { 467 u_int tail; 468 469 tail = ahd_inw(ahd, COMPLETE_DMA_SCB_TAIL); 470 ahd_set_scbptr(ahd, tail); 471 ahd_outw(ahd, SCB_NEXT_COMPLETE, scbid); 472 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid); 473 ahd_set_scbptr(ahd, scbid); 474 } 475 } else 476 ahd_complete_scb(ahd, scb); 477 } 478 ahd_set_scbptr(ahd, saved_scbptr); 479 480 /* 481 * Setup for command channel portion of flush. 482 */ 483 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 484 485 /* 486 * Wait for any inprogress DMA to complete and clear DMA state 487 * if this if for an SCB in the qinfifo. 488 */ 489 while (((ccscbctl = ahd_inb(ahd, CCSCBCTL)) & (CCARREN|CCSCBEN)) != 0) { 490 491 if ((ccscbctl & (CCSCBDIR|CCARREN)) == (CCSCBDIR|CCARREN)) { 492 if ((ccscbctl & ARRDONE) != 0) 493 break; 494 } else if ((ccscbctl & CCSCBDONE) != 0) 495 break; 496 aic_delay(200); 497 } 498 /* 499 * We leave the sequencer to cleanup in the case of DMA's to 500 * update the qoutfifo. In all other cases (DMA's to the 501 * chip or a push of an SCB from the COMPLETE_DMA_SCB list), 502 * we disable the DMA engine so that the sequencer will not 503 * attempt to handle the DMA completion. 504 */ 505 if ((ccscbctl & CCSCBDIR) != 0 || (ccscbctl & ARRDONE) != 0) 506 ahd_outb(ahd, CCSCBCTL, ccscbctl & ~(CCARREN|CCSCBEN)); 507 508 /* 509 * Complete any SCBs that just finished 510 * being DMA'ed into the qoutfifo. 511 */ 512 ahd_run_qoutfifo(ahd); 513 514 saved_scbptr = ahd_get_scbptr(ahd); 515 /* 516 * Manually update/complete any completed SCBs that are waiting to be 517 * DMA'ed back up to the host. 518 */ 519 scbid = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 520 while (!SCBID_IS_NULL(scbid)) { 521 uint8_t *hscb_ptr; 522 u_int i; 523 524 ahd_set_scbptr(ahd, scbid); 525 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 526 scb = ahd_lookup_scb(ahd, scbid); 527 if (scb == NULL) { 528 printf("%s: Warning - DMA-up and complete " 529 "SCB %d invalid\n", ahd_name(ahd), scbid); 530 AHD_CORRECTABLE_ERROR(ahd); 531 continue; 532 } 533 hscb_ptr = (uint8_t *)scb->hscb; 534 for (i = 0; i < sizeof(struct hardware_scb); i++) 535 *hscb_ptr++ = ahd_inb_scbram(ahd, SCB_BASE + i); 536 537 ahd_complete_scb(ahd, scb); 538 scbid = next_scbid; 539 } 540 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL); 541 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, SCB_LIST_NULL); 542 543 scbid = ahd_inw(ahd, COMPLETE_ON_QFREEZE_HEAD); 544 while (!SCBID_IS_NULL(scbid)) { 545 546 ahd_set_scbptr(ahd, scbid); 547 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 548 scb = ahd_lookup_scb(ahd, scbid); 549 if (scb == NULL) { 550 printf("%s: Warning - Complete Qfrz SCB %d invalid\n", 551 ahd_name(ahd), scbid); 552 AHD_CORRECTABLE_ERROR(ahd); 553 continue; 554 } 555 556 ahd_complete_scb(ahd, scb); 557 scbid = next_scbid; 558 } 559 ahd_outw(ahd, COMPLETE_ON_QFREEZE_HEAD, SCB_LIST_NULL); 560 561 scbid = ahd_inw(ahd, COMPLETE_SCB_HEAD); 562 while (!SCBID_IS_NULL(scbid)) { 563 564 ahd_set_scbptr(ahd, scbid); 565 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 566 scb = ahd_lookup_scb(ahd, scbid); 567 if (scb == NULL) { 568 printf("%s: Warning - Complete SCB %d invalid\n", 569 ahd_name(ahd), scbid); 570 AHD_CORRECTABLE_ERROR(ahd); 571 continue; 572 } 573 574 ahd_complete_scb(ahd, scb); 575 scbid = next_scbid; 576 } 577 ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL); 578 579 /* 580 * Restore state. 581 */ 582 ahd_set_scbptr(ahd, saved_scbptr); 583 ahd_restore_modes(ahd, saved_modes); 584 ahd->flags |= AHD_UPDATE_PEND_CMDS; 585 } 586 587 /* 588 * Determine if an SCB for a packetized transaction 589 * is active in a FIFO. 590 */ 591 static int 592 ahd_scb_active_in_fifo(struct ahd_softc *ahd, struct scb *scb) 593 { 594 595 /* 596 * The FIFO is only active for our transaction if 597 * the SCBPTR matches the SCB's ID and the firmware 598 * has installed a handler for the FIFO or we have 599 * a pending SAVEPTRS or CFG4DATA interrupt. 600 */ 601 if (ahd_get_scbptr(ahd) != SCB_GET_TAG(scb) 602 || ((ahd_inb(ahd, LONGJMP_ADDR+1) & INVALID_ADDR) != 0 603 && (ahd_inb(ahd, SEQINTSRC) & (CFG4DATA|SAVEPTRS)) == 0)) 604 return (0); 605 606 return (1); 607 } 608 609 /* 610 * Run a data fifo to completion for a transaction we know 611 * has completed across the SCSI bus (good status has been 612 * received). We are already set to the correct FIFO mode 613 * on entry to this routine. 614 * 615 * This function attempts to operate exactly as the firmware 616 * would when running this FIFO. Care must be taken to update 617 * this routine any time the firmware's FIFO algorithm is 618 * changed. 619 */ 620 static void 621 ahd_run_data_fifo(struct ahd_softc *ahd, struct scb *scb) 622 { 623 u_int seqintsrc; 624 625 seqintsrc = ahd_inb(ahd, SEQINTSRC); 626 if ((seqintsrc & CFG4DATA) != 0) { 627 uint32_t datacnt; 628 uint32_t sgptr; 629 630 /* 631 * Clear full residual flag. 632 */ 633 sgptr = ahd_inl_scbram(ahd, SCB_SGPTR) & ~SG_FULL_RESID; 634 ahd_outb(ahd, SCB_SGPTR, sgptr); 635 636 /* 637 * Load datacnt and address. 638 */ 639 datacnt = ahd_inl_scbram(ahd, SCB_DATACNT); 640 if ((datacnt & AHD_DMA_LAST_SEG) != 0) { 641 sgptr |= LAST_SEG; 642 ahd_outb(ahd, SG_STATE, 0); 643 } else 644 ahd_outb(ahd, SG_STATE, LOADING_NEEDED); 645 ahd_outq(ahd, HADDR, ahd_inq_scbram(ahd, SCB_DATAPTR)); 646 ahd_outl(ahd, HCNT, datacnt & AHD_SG_LEN_MASK); 647 ahd_outb(ahd, SG_CACHE_PRE, sgptr); 648 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN); 649 650 /* 651 * Initialize Residual Fields. 652 */ 653 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, datacnt >> 24); 654 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr & SG_PTR_MASK); 655 656 /* 657 * Mark the SCB as having a FIFO in use. 658 */ 659 ahd_outb(ahd, SCB_FIFO_USE_COUNT, 660 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) + 1); 661 662 /* 663 * Install a "fake" handler for this FIFO. 664 */ 665 ahd_outw(ahd, LONGJMP_ADDR, 0); 666 667 /* 668 * Notify the hardware that we have satisfied 669 * this sequencer interrupt. 670 */ 671 ahd_outb(ahd, CLRSEQINTSRC, CLRCFG4DATA); 672 } else if ((seqintsrc & SAVEPTRS) != 0) { 673 uint32_t sgptr; 674 uint32_t resid; 675 676 if ((ahd_inb(ahd, LONGJMP_ADDR+1)&INVALID_ADDR) != 0) { 677 /* 678 * Snapshot Save Pointers. All that 679 * is necessary to clear the snapshot 680 * is a CLRCHN. 681 */ 682 goto clrchn; 683 } 684 685 /* 686 * Disable S/G fetch so the DMA engine 687 * is available to future users. 688 */ 689 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) 690 ahd_outb(ahd, CCSGCTL, 0); 691 ahd_outb(ahd, SG_STATE, 0); 692 693 /* 694 * Flush the data FIFO. Strickly only 695 * necessary for Rev A parts. 696 */ 697 ahd_outb(ahd, DFCNTRL, ahd_inb(ahd, DFCNTRL) | FIFOFLUSH); 698 699 /* 700 * Calculate residual. 701 */ 702 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 703 resid = ahd_inl(ahd, SHCNT); 704 resid |= ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT+3) << 24; 705 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, resid); 706 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG) == 0) { 707 /* 708 * Must back up to the correct S/G element. 709 * Typically this just means resetting our 710 * low byte to the offset in the SG_CACHE, 711 * but if we wrapped, we have to correct 712 * the other bytes of the sgptr too. 713 */ 714 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & 0x80) != 0 715 && (sgptr & 0x80) == 0) 716 sgptr -= 0x100; 717 sgptr &= ~0xFF; 718 sgptr |= ahd_inb(ahd, SG_CACHE_SHADOW) 719 & SG_ADDR_MASK; 720 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 721 ahd_outb(ahd, SCB_RESIDUAL_DATACNT + 3, 0); 722 } else if ((resid & AHD_SG_LEN_MASK) == 0) { 723 ahd_outb(ahd, SCB_RESIDUAL_SGPTR, 724 sgptr | SG_LIST_NULL); 725 } 726 /* 727 * Save Pointers. 728 */ 729 ahd_outq(ahd, SCB_DATAPTR, ahd_inq(ahd, SHADDR)); 730 ahd_outl(ahd, SCB_DATACNT, resid); 731 ahd_outl(ahd, SCB_SGPTR, sgptr); 732 ahd_outb(ahd, CLRSEQINTSRC, CLRSAVEPTRS); 733 ahd_outb(ahd, SEQIMODE, 734 ahd_inb(ahd, SEQIMODE) | ENSAVEPTRS); 735 /* 736 * If the data is to the SCSI bus, we are 737 * done, otherwise wait for FIFOEMP. 738 */ 739 if ((ahd_inb(ahd, DFCNTRL) & DIRECTION) != 0) 740 goto clrchn; 741 } else if ((ahd_inb(ahd, SG_STATE) & LOADING_NEEDED) != 0) { 742 uint32_t sgptr; 743 uint64_t data_addr; 744 uint32_t data_len; 745 u_int dfcntrl; 746 747 /* 748 * Disable S/G fetch so the DMA engine 749 * is available to future users. We won't 750 * be using the DMA engine to load segments. 751 */ 752 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) { 753 ahd_outb(ahd, CCSGCTL, 0); 754 ahd_outb(ahd, SG_STATE, LOADING_NEEDED); 755 } 756 757 /* 758 * Wait for the DMA engine to notice that the 759 * host transfer is enabled and that there is 760 * space in the S/G FIFO for new segments before 761 * loading more segments. 762 */ 763 if ((ahd_inb(ahd, DFSTATUS) & PRELOAD_AVAIL) != 0 764 && (ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0) { 765 766 /* 767 * Determine the offset of the next S/G 768 * element to load. 769 */ 770 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 771 sgptr &= SG_PTR_MASK; 772 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 773 struct ahd_dma64_seg *sg; 774 775 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 776 data_addr = sg->addr; 777 data_len = sg->len; 778 sgptr += sizeof(*sg); 779 } else { 780 struct ahd_dma_seg *sg; 781 782 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 783 data_addr = sg->len & AHD_SG_HIGH_ADDR_MASK; 784 data_addr <<= 8; 785 data_addr |= sg->addr; 786 data_len = sg->len; 787 sgptr += sizeof(*sg); 788 } 789 790 /* 791 * Update residual information. 792 */ 793 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, data_len >> 24); 794 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 795 796 /* 797 * Load the S/G. 798 */ 799 if (data_len & AHD_DMA_LAST_SEG) { 800 sgptr |= LAST_SEG; 801 ahd_outb(ahd, SG_STATE, 0); 802 } 803 ahd_outq(ahd, HADDR, data_addr); 804 ahd_outl(ahd, HCNT, data_len & AHD_SG_LEN_MASK); 805 ahd_outb(ahd, SG_CACHE_PRE, sgptr & 0xFF); 806 807 /* 808 * Advertise the segment to the hardware. 809 */ 810 dfcntrl = ahd_inb(ahd, DFCNTRL)|PRELOADEN|HDMAEN; 811 if ((ahd->features & AHD_NEW_DFCNTRL_OPTS) != 0) { 812 /* 813 * Use SCSIENWRDIS so that SCSIEN 814 * is never modified by this 815 * operation. 816 */ 817 dfcntrl |= SCSIENWRDIS; 818 } 819 ahd_outb(ahd, DFCNTRL, dfcntrl); 820 } 821 } else if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG_DONE) != 0) { 822 823 /* 824 * Transfer completed to the end of SG list 825 * and has flushed to the host. 826 */ 827 ahd_outb(ahd, SCB_SGPTR, 828 ahd_inb_scbram(ahd, SCB_SGPTR) | SG_LIST_NULL); 829 goto clrchn; 830 } else if ((ahd_inb(ahd, DFSTATUS) & FIFOEMP) != 0) { 831 clrchn: 832 /* 833 * Clear any handler for this FIFO, decrement 834 * the FIFO use count for the SCB, and release 835 * the FIFO. 836 */ 837 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 838 ahd_outb(ahd, SCB_FIFO_USE_COUNT, 839 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) - 1); 840 ahd_outb(ahd, DFFSXFRCTL, CLRCHN); 841 } 842 } 843 844 /* 845 * Look for entries in the QoutFIFO that have completed. 846 * The valid_tag completion field indicates the validity 847 * of the entry - the valid value toggles each time through 848 * the queue. We use the sg_status field in the completion 849 * entry to avoid referencing the hscb if the completion 850 * occurred with no errors and no residual. sg_status is 851 * a copy of the first byte (little endian) of the sgptr 852 * hscb field. 853 */ 854 void 855 ahd_run_qoutfifo(struct ahd_softc *ahd) 856 { 857 struct ahd_completion *completion; 858 struct scb *scb; 859 u_int scb_index; 860 861 if ((ahd->flags & AHD_RUNNING_QOUTFIFO) != 0) 862 panic("ahd_run_qoutfifo recursion"); 863 ahd->flags |= AHD_RUNNING_QOUTFIFO; 864 ahd_sync_qoutfifo(ahd, BUS_DMASYNC_POSTREAD); 865 for (;;) { 866 completion = &ahd->qoutfifo[ahd->qoutfifonext]; 867 868 if (completion->valid_tag != ahd->qoutfifonext_valid_tag) 869 break; 870 871 scb_index = aic_le16toh(completion->tag); 872 scb = ahd_lookup_scb(ahd, scb_index); 873 if (scb == NULL) { 874 printf("%s: WARNING no command for scb %d " 875 "(cmdcmplt)\nQOUTPOS = %d\n", 876 ahd_name(ahd), scb_index, 877 ahd->qoutfifonext); 878 AHD_CORRECTABLE_ERROR(ahd); 879 ahd_dump_card_state(ahd); 880 } else if ((completion->sg_status & SG_STATUS_VALID) != 0) { 881 ahd_handle_scb_status(ahd, scb); 882 } else { 883 ahd_done(ahd, scb); 884 } 885 886 ahd->qoutfifonext = (ahd->qoutfifonext+1) & (AHD_QOUT_SIZE-1); 887 if (ahd->qoutfifonext == 0) 888 ahd->qoutfifonext_valid_tag ^= QOUTFIFO_ENTRY_VALID; 889 } 890 ahd->flags &= ~AHD_RUNNING_QOUTFIFO; 891 } 892 893 /************************* Interrupt Handling *********************************/ 894 void 895 ahd_handle_hwerrint(struct ahd_softc *ahd) 896 { 897 /* 898 * Some catastrophic hardware error has occurred. 899 * Print it for the user and disable the controller. 900 */ 901 int i; 902 int error; 903 904 error = ahd_inb(ahd, ERROR); 905 for (i = 0; i < num_errors; i++) { 906 if ((error & ahd_hard_errors[i].errno) != 0) { 907 printf("%s: hwerrint, %s\n", 908 ahd_name(ahd), ahd_hard_errors[i].errmesg); 909 AHD_UNCORRECTABLE_ERROR(ahd); 910 } 911 } 912 913 ahd_dump_card_state(ahd); 914 panic("BRKADRINT"); 915 916 /* Tell everyone that this HBA is no longer available */ 917 ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS, 918 CAM_LUN_WILDCARD, SCB_LIST_NULL, ROLE_UNKNOWN, 919 CAM_NO_HBA); 920 921 /* Tell the system that this controller has gone away. */ 922 ahd_free(ahd); 923 } 924 925 void 926 ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat) 927 { 928 u_int seqintcode; 929 930 /* 931 * Save the sequencer interrupt code and clear the SEQINT 932 * bit. We will unpause the sequencer, if appropriate, 933 * after servicing the request. 934 */ 935 seqintcode = ahd_inb(ahd, SEQINTCODE); 936 ahd_outb(ahd, CLRINT, CLRSEQINT); 937 if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) { 938 /* 939 * Unpause the sequencer and let it clear 940 * SEQINT by writing NO_SEQINT to it. This 941 * will cause the sequencer to be paused again, 942 * which is the expected state of this routine. 943 */ 944 ahd_unpause(ahd); 945 while (!ahd_is_paused(ahd)) 946 ; 947 ahd_outb(ahd, CLRINT, CLRSEQINT); 948 } 949 ahd_update_modes(ahd); 950 #ifdef AHD_DEBUG 951 if ((ahd_debug & AHD_SHOW_MISC) != 0) 952 printf("%s: Handle Seqint Called for code %d\n", 953 ahd_name(ahd), seqintcode); 954 #endif 955 switch (seqintcode) { 956 case ENTERING_NONPACK: 957 { 958 struct scb *scb; 959 u_int scbid; 960 961 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 962 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 963 scbid = ahd_get_scbptr(ahd); 964 scb = ahd_lookup_scb(ahd, scbid); 965 if (scb == NULL) { 966 /* 967 * Somehow need to know if this 968 * is from a selection or reselection. 969 * From that, we can determine target 970 * ID so we at least have an I_T nexus. 971 */ 972 } else { 973 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid); 974 ahd_outb(ahd, SAVED_LUN, scb->hscb->lun); 975 ahd_outb(ahd, SEQ_FLAGS, 0x0); 976 } 977 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0 978 && (ahd_inb(ahd, SCSISIGO) & ATNO) != 0) { 979 /* 980 * Phase change after read stream with 981 * CRC error with P0 asserted on last 982 * packet. 983 */ 984 #ifdef AHD_DEBUG 985 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) 986 printf("%s: Assuming LQIPHASE_NLQ with " 987 "P0 assertion\n", ahd_name(ahd)); 988 #endif 989 } 990 #ifdef AHD_DEBUG 991 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) 992 printf("%s: Entering NONPACK\n", ahd_name(ahd)); 993 #endif 994 break; 995 } 996 case INVALID_SEQINT: 997 printf("%s: Invalid Sequencer interrupt occurred.\n", 998 ahd_name(ahd)); 999 ahd_dump_card_state(ahd); 1000 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1001 AHD_UNCORRECTABLE_ERROR(ahd); 1002 break; 1003 case STATUS_OVERRUN: 1004 { 1005 struct scb *scb; 1006 u_int scbid; 1007 1008 scbid = ahd_get_scbptr(ahd); 1009 scb = ahd_lookup_scb(ahd, scbid); 1010 if (scb != NULL) 1011 ahd_print_path(ahd, scb); 1012 else 1013 printf("%s: ", ahd_name(ahd)); 1014 printf("SCB %d Packetized Status Overrun", scbid); 1015 ahd_dump_card_state(ahd); 1016 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1017 AHD_UNCORRECTABLE_ERROR(ahd); 1018 break; 1019 } 1020 case CFG4ISTAT_INTR: 1021 { 1022 struct scb *scb; 1023 u_int scbid; 1024 1025 scbid = ahd_get_scbptr(ahd); 1026 scb = ahd_lookup_scb(ahd, scbid); 1027 if (scb == NULL) { 1028 ahd_dump_card_state(ahd); 1029 printf("CFG4ISTAT: Free SCB %d referenced", scbid); 1030 AHD_FATAL_ERROR(ahd); 1031 panic("For safety"); 1032 } 1033 ahd_outq(ahd, HADDR, scb->sense_busaddr); 1034 ahd_outw(ahd, HCNT, AHD_SENSE_BUFSIZE); 1035 ahd_outb(ahd, HCNT + 2, 0); 1036 ahd_outb(ahd, SG_CACHE_PRE, SG_LAST_SEG); 1037 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN); 1038 break; 1039 } 1040 case ILLEGAL_PHASE: 1041 { 1042 u_int bus_phase; 1043 1044 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 1045 printf("%s: ILLEGAL_PHASE 0x%x\n", 1046 ahd_name(ahd), bus_phase); 1047 1048 switch (bus_phase) { 1049 case P_DATAOUT: 1050 case P_DATAIN: 1051 case P_DATAOUT_DT: 1052 case P_DATAIN_DT: 1053 case P_MESGOUT: 1054 case P_STATUS: 1055 case P_MESGIN: 1056 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1057 printf("%s: Issued Bus Reset.\n", ahd_name(ahd)); 1058 AHD_UNCORRECTABLE_ERROR(ahd); 1059 break; 1060 case P_COMMAND: 1061 { 1062 struct ahd_devinfo devinfo; 1063 struct scb *scb; 1064 struct ahd_tmode_tstate *tstate; 1065 u_int scbid; 1066 1067 /* 1068 * If a target takes us into the command phase 1069 * assume that it has been externally reset and 1070 * has thus lost our previous packetized negotiation 1071 * agreement. Since we have not sent an identify 1072 * message and may not have fully qualified the 1073 * connection, we change our command to TUR, assert 1074 * ATN and ABORT the task when we go to message in 1075 * phase. The OSM will see the REQUEUE_REQUEST 1076 * status and retry the command. 1077 */ 1078 scbid = ahd_get_scbptr(ahd); 1079 scb = ahd_lookup_scb(ahd, scbid); 1080 if (scb == NULL) { 1081 AHD_CORRECTABLE_ERROR(ahd); 1082 printf("Invalid phase with no valid SCB. " 1083 "Resetting bus.\n"); 1084 ahd_reset_channel(ahd, 'A', 1085 /*Initiate Reset*/TRUE); 1086 break; 1087 } 1088 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb), 1089 SCB_GET_TARGET(ahd, scb), 1090 SCB_GET_LUN(scb), 1091 SCB_GET_CHANNEL(ahd, scb), 1092 ROLE_INITIATOR); 1093 ahd_fetch_transinfo(ahd, 1094 devinfo.channel, 1095 devinfo.our_scsiid, 1096 devinfo.target, 1097 &tstate); 1098 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 1099 AHD_TRANS_ACTIVE, /*paused*/TRUE); 1100 ahd_set_syncrate(ahd, &devinfo, /*period*/0, 1101 /*offset*/0, /*ppr_options*/0, 1102 AHD_TRANS_ACTIVE, /*paused*/TRUE); 1103 ahd_outb(ahd, SCB_CDB_STORE, 0); 1104 ahd_outb(ahd, SCB_CDB_STORE+1, 0); 1105 ahd_outb(ahd, SCB_CDB_STORE+2, 0); 1106 ahd_outb(ahd, SCB_CDB_STORE+3, 0); 1107 ahd_outb(ahd, SCB_CDB_STORE+4, 0); 1108 ahd_outb(ahd, SCB_CDB_STORE+5, 0); 1109 ahd_outb(ahd, SCB_CDB_LEN, 6); 1110 scb->hscb->control &= ~(TAG_ENB|SCB_TAG_TYPE); 1111 scb->hscb->control |= MK_MESSAGE; 1112 ahd_outb(ahd, SCB_CONTROL, scb->hscb->control); 1113 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1114 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid); 1115 /* 1116 * The lun is 0, regardless of the SCB's lun 1117 * as we have not sent an identify message. 1118 */ 1119 ahd_outb(ahd, SAVED_LUN, 0); 1120 ahd_outb(ahd, SEQ_FLAGS, 0); 1121 ahd_assert_atn(ahd); 1122 scb->flags &= ~SCB_PACKETIZED; 1123 scb->flags |= SCB_ABORT|SCB_CMDPHASE_ABORT; 1124 ahd_freeze_devq(ahd, scb); 1125 aic_set_transaction_status(scb, CAM_REQUEUE_REQ); 1126 aic_freeze_scb(scb); 1127 1128 /* 1129 * Allow the sequencer to continue with 1130 * non-pack processing. 1131 */ 1132 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1133 ahd_outb(ahd, CLRLQOINT1, CLRLQOPHACHGINPKT); 1134 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) { 1135 ahd_outb(ahd, CLRLQOINT1, 0); 1136 } 1137 #ifdef AHD_DEBUG 1138 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1139 ahd_print_path(ahd, scb); 1140 AHD_CORRECTABLE_ERROR(ahd); 1141 printf("Unexpected command phase from " 1142 "packetized target\n"); 1143 } 1144 #endif 1145 break; 1146 } 1147 } 1148 break; 1149 } 1150 case CFG4OVERRUN: 1151 { 1152 struct scb *scb; 1153 u_int scb_index; 1154 1155 #ifdef AHD_DEBUG 1156 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1157 printf("%s: CFG4OVERRUN mode = %x\n", ahd_name(ahd), 1158 ahd_inb(ahd, MODE_PTR)); 1159 } 1160 #endif 1161 scb_index = ahd_get_scbptr(ahd); 1162 scb = ahd_lookup_scb(ahd, scb_index); 1163 if (scb == NULL) { 1164 /* 1165 * Attempt to transfer to an SCB that is 1166 * not outstanding. 1167 */ 1168 ahd_assert_atn(ahd); 1169 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1170 ahd->msgout_buf[0] = MSG_ABORT_TASK; 1171 ahd->msgout_len = 1; 1172 ahd->msgout_index = 0; 1173 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 1174 /* 1175 * Clear status received flag to prevent any 1176 * attempt to complete this bogus SCB. 1177 */ 1178 ahd_outb(ahd, SCB_CONTROL, 1179 ahd_inb_scbram(ahd, SCB_CONTROL) 1180 & ~STATUS_RCVD); 1181 } 1182 break; 1183 } 1184 case DUMP_CARD_STATE: 1185 { 1186 ahd_dump_card_state(ahd); 1187 break; 1188 } 1189 case PDATA_REINIT: 1190 { 1191 #ifdef AHD_DEBUG 1192 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1193 printf("%s: PDATA_REINIT - DFCNTRL = 0x%x " 1194 "SG_CACHE_SHADOW = 0x%x\n", 1195 ahd_name(ahd), ahd_inb(ahd, DFCNTRL), 1196 ahd_inb(ahd, SG_CACHE_SHADOW)); 1197 } 1198 #endif 1199 ahd_reinitialize_dataptrs(ahd); 1200 break; 1201 } 1202 case HOST_MSG_LOOP: 1203 { 1204 struct ahd_devinfo devinfo; 1205 1206 /* 1207 * The sequencer has encountered a message phase 1208 * that requires host assistance for completion. 1209 * While handling the message phase(s), we will be 1210 * notified by the sequencer after each byte is 1211 * transferred so we can track bus phase changes. 1212 * 1213 * If this is the first time we've seen a HOST_MSG_LOOP 1214 * interrupt, initialize the state of the host message 1215 * loop. 1216 */ 1217 ahd_fetch_devinfo(ahd, &devinfo); 1218 if (ahd->msg_type == MSG_TYPE_NONE) { 1219 struct scb *scb; 1220 u_int scb_index; 1221 u_int bus_phase; 1222 1223 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 1224 if (bus_phase != P_MESGIN 1225 && bus_phase != P_MESGOUT) { 1226 printf("ahd_intr: HOST_MSG_LOOP bad " 1227 "phase 0x%x\n", bus_phase); 1228 AHD_CORRECTABLE_ERROR(ahd); 1229 /* 1230 * Probably transitioned to bus free before 1231 * we got here. Just punt the message. 1232 */ 1233 ahd_dump_card_state(ahd); 1234 ahd_clear_intstat(ahd); 1235 ahd_restart(ahd); 1236 return; 1237 } 1238 1239 scb_index = ahd_get_scbptr(ahd); 1240 scb = ahd_lookup_scb(ahd, scb_index); 1241 if (devinfo.role == ROLE_INITIATOR) { 1242 if (bus_phase == P_MESGOUT) 1243 ahd_setup_initiator_msgout(ahd, 1244 &devinfo, 1245 scb); 1246 else { 1247 ahd->msg_type = 1248 MSG_TYPE_INITIATOR_MSGIN; 1249 ahd->msgin_index = 0; 1250 } 1251 } 1252 #ifdef AHD_TARGET_MODE 1253 else { 1254 if (bus_phase == P_MESGOUT) { 1255 ahd->msg_type = 1256 MSG_TYPE_TARGET_MSGOUT; 1257 ahd->msgin_index = 0; 1258 } 1259 else 1260 ahd_setup_target_msgin(ahd, 1261 &devinfo, 1262 scb); 1263 } 1264 #endif 1265 } 1266 1267 ahd_handle_message_phase(ahd); 1268 break; 1269 } 1270 case NO_MATCH: 1271 { 1272 /* Ensure we don't leave the selection hardware on */ 1273 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 1274 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 1275 1276 printf("%s:%c:%d: no active SCB for reconnecting " 1277 "target - issuing BUS DEVICE RESET\n", 1278 ahd_name(ahd), 'A', ahd_inb(ahd, SELID) >> 4); 1279 printf("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, " 1280 "REG0 == 0x%x ACCUM = 0x%x\n", 1281 ahd_inb(ahd, SAVED_SCSIID), ahd_inb(ahd, SAVED_LUN), 1282 ahd_inw(ahd, REG0), ahd_inb(ahd, ACCUM)); 1283 printf("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, " 1284 "SINDEX == 0x%x\n", 1285 ahd_inb(ahd, SEQ_FLAGS), ahd_get_scbptr(ahd), 1286 ahd_find_busy_tcl(ahd, 1287 BUILD_TCL(ahd_inb(ahd, SAVED_SCSIID), 1288 ahd_inb(ahd, SAVED_LUN))), 1289 ahd_inw(ahd, SINDEX)); 1290 printf("SELID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, " 1291 "SCB_CONTROL == 0x%x\n", 1292 ahd_inb(ahd, SELID), ahd_inb_scbram(ahd, SCB_SCSIID), 1293 ahd_inb_scbram(ahd, SCB_LUN), 1294 ahd_inb_scbram(ahd, SCB_CONTROL)); 1295 printf("SCSIBUS[0] == 0x%x, SCSISIGI == 0x%x\n", 1296 ahd_inb(ahd, SCSIBUS), ahd_inb(ahd, SCSISIGI)); 1297 printf("SXFRCTL0 == 0x%x\n", ahd_inb(ahd, SXFRCTL0)); 1298 printf("SEQCTL0 == 0x%x\n", ahd_inb(ahd, SEQCTL0)); 1299 ahd_dump_card_state(ahd); 1300 ahd->msgout_buf[0] = MSG_BUS_DEV_RESET; 1301 ahd->msgout_len = 1; 1302 ahd->msgout_index = 0; 1303 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 1304 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1305 ahd_assert_atn(ahd); 1306 break; 1307 } 1308 case PROTO_VIOLATION: 1309 { 1310 ahd_handle_proto_violation(ahd); 1311 break; 1312 } 1313 case IGN_WIDE_RES: 1314 { 1315 struct ahd_devinfo devinfo; 1316 1317 ahd_fetch_devinfo(ahd, &devinfo); 1318 ahd_handle_ign_wide_residue(ahd, &devinfo); 1319 break; 1320 } 1321 case BAD_PHASE: 1322 { 1323 u_int lastphase; 1324 1325 lastphase = ahd_inb(ahd, LASTPHASE); 1326 printf("%s:%c:%d: unknown scsi bus phase %x, " 1327 "lastphase = 0x%x. Attempting to continue\n", 1328 ahd_name(ahd), 'A', 1329 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)), 1330 lastphase, ahd_inb(ahd, SCSISIGI)); 1331 AHD_CORRECTABLE_ERROR(ahd); 1332 break; 1333 } 1334 case MISSED_BUSFREE: 1335 { 1336 u_int lastphase; 1337 1338 lastphase = ahd_inb(ahd, LASTPHASE); 1339 printf("%s:%c:%d: Missed busfree. " 1340 "Lastphase = 0x%x, Curphase = 0x%x\n", 1341 ahd_name(ahd), 'A', 1342 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)), 1343 lastphase, ahd_inb(ahd, SCSISIGI)); 1344 AHD_CORRECTABLE_ERROR(ahd); 1345 ahd_restart(ahd); 1346 return; 1347 } 1348 case DATA_OVERRUN: 1349 { 1350 /* 1351 * When the sequencer detects an overrun, it 1352 * places the controller in "BITBUCKET" mode 1353 * and allows the target to complete its transfer. 1354 * Unfortunately, none of the counters get updated 1355 * when the controller is in this mode, so we have 1356 * no way of knowing how large the overrun was. 1357 */ 1358 struct scb *scb; 1359 u_int scbindex; 1360 #ifdef AHD_DEBUG 1361 u_int lastphase; 1362 #endif 1363 1364 scbindex = ahd_get_scbptr(ahd); 1365 scb = ahd_lookup_scb(ahd, scbindex); 1366 #ifdef AHD_DEBUG 1367 lastphase = ahd_inb(ahd, LASTPHASE); 1368 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1369 ahd_print_path(ahd, scb); 1370 printf("data overrun detected %s. Tag == 0x%x.\n", 1371 ahd_lookup_phase_entry(lastphase)->phasemsg, 1372 SCB_GET_TAG(scb)); 1373 ahd_print_path(ahd, scb); 1374 printf("%s seen Data Phase. Length = %ld. " 1375 "NumSGs = %d.\n", 1376 ahd_inb(ahd, SEQ_FLAGS) & DPHASE 1377 ? "Have" : "Haven't", 1378 aic_get_transfer_length(scb), scb->sg_count); 1379 ahd_dump_sglist(scb); 1380 } 1381 #endif 1382 1383 /* 1384 * Set this and it will take effect when the 1385 * target does a command complete. 1386 */ 1387 ahd_freeze_devq(ahd, scb); 1388 aic_set_transaction_status(scb, CAM_DATA_RUN_ERR); 1389 aic_freeze_scb(scb); 1390 break; 1391 } 1392 case MKMSG_FAILED: 1393 { 1394 struct ahd_devinfo devinfo; 1395 struct scb *scb; 1396 u_int scbid; 1397 1398 ahd_fetch_devinfo(ahd, &devinfo); 1399 printf("%s:%c:%d:%d: Attempt to issue message failed\n", 1400 ahd_name(ahd), devinfo.channel, devinfo.target, 1401 devinfo.lun); 1402 scbid = ahd_get_scbptr(ahd); 1403 scb = ahd_lookup_scb(ahd, scbid); 1404 AHD_CORRECTABLE_ERROR(ahd); 1405 if (scb != NULL 1406 && (scb->flags & SCB_RECOVERY_SCB) != 0) 1407 /* 1408 * Ensure that we didn't put a second instance of this 1409 * SCB into the QINFIFO. 1410 */ 1411 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 1412 SCB_GET_CHANNEL(ahd, scb), 1413 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 1414 ROLE_INITIATOR, /*status*/0, 1415 SEARCH_REMOVE); 1416 ahd_outb(ahd, SCB_CONTROL, 1417 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE); 1418 break; 1419 } 1420 case TASKMGMT_FUNC_COMPLETE: 1421 { 1422 u_int scbid; 1423 struct scb *scb; 1424 1425 scbid = ahd_get_scbptr(ahd); 1426 scb = ahd_lookup_scb(ahd, scbid); 1427 if (scb != NULL) { 1428 u_int lun; 1429 u_int tag; 1430 cam_status error; 1431 1432 ahd_print_path(ahd, scb); 1433 printf("Task Management Func 0x%x Complete\n", 1434 scb->hscb->task_management); 1435 lun = CAM_LUN_WILDCARD; 1436 tag = SCB_LIST_NULL; 1437 1438 switch (scb->hscb->task_management) { 1439 case SIU_TASKMGMT_ABORT_TASK: 1440 tag = SCB_GET_TAG(scb); 1441 case SIU_TASKMGMT_ABORT_TASK_SET: 1442 case SIU_TASKMGMT_CLEAR_TASK_SET: 1443 lun = scb->hscb->lun; 1444 error = CAM_REQ_ABORTED; 1445 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 1446 'A', lun, tag, ROLE_INITIATOR, 1447 error); 1448 break; 1449 case SIU_TASKMGMT_LUN_RESET: 1450 lun = scb->hscb->lun; 1451 case SIU_TASKMGMT_TARGET_RESET: 1452 { 1453 struct ahd_devinfo devinfo; 1454 1455 ahd_scb_devinfo(ahd, &devinfo, scb); 1456 error = CAM_BDR_SENT; 1457 ahd_handle_devreset(ahd, &devinfo, lun, 1458 CAM_BDR_SENT, 1459 lun != CAM_LUN_WILDCARD 1460 ? "Lun Reset" 1461 : "Target Reset", 1462 /*verbose_level*/0); 1463 break; 1464 } 1465 default: 1466 panic("Unexpected TaskMgmt Func\n"); 1467 break; 1468 } 1469 } 1470 break; 1471 } 1472 case TASKMGMT_CMD_CMPLT_OKAY: 1473 { 1474 u_int scbid; 1475 struct scb *scb; 1476 1477 /* 1478 * An ABORT TASK TMF failed to be delivered before 1479 * the targeted command completed normally. 1480 */ 1481 scbid = ahd_get_scbptr(ahd); 1482 scb = ahd_lookup_scb(ahd, scbid); 1483 if (scb != NULL) { 1484 /* 1485 * Remove the second instance of this SCB from 1486 * the QINFIFO if it is still there. 1487 */ 1488 ahd_print_path(ahd, scb); 1489 printf("SCB completes before TMF\n"); 1490 /* 1491 * Handle losing the race. Wait until any 1492 * current selection completes. We will then 1493 * set the TMF back to zero in this SCB so that 1494 * the sequencer doesn't bother to issue another 1495 * sequencer interrupt for its completion. 1496 */ 1497 while ((ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0 1498 && (ahd_inb(ahd, SSTAT0) & SELDO) == 0 1499 && (ahd_inb(ahd, SSTAT1) & SELTO) == 0) 1500 ; 1501 ahd_outb(ahd, SCB_TASK_MANAGEMENT, 0); 1502 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 1503 SCB_GET_CHANNEL(ahd, scb), 1504 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 1505 ROLE_INITIATOR, /*status*/0, 1506 SEARCH_REMOVE); 1507 } 1508 break; 1509 } 1510 case TRACEPOINT0: 1511 case TRACEPOINT1: 1512 case TRACEPOINT2: 1513 case TRACEPOINT3: 1514 printf("%s: Tracepoint %d\n", ahd_name(ahd), 1515 seqintcode - TRACEPOINT0); 1516 break; 1517 case NO_SEQINT: 1518 break; 1519 case SAW_HWERR: 1520 ahd_handle_hwerrint(ahd); 1521 break; 1522 default: 1523 printf("%s: Unexpected SEQINTCODE %d\n", ahd_name(ahd), 1524 seqintcode); 1525 break; 1526 } 1527 /* 1528 * The sequencer is paused immediately on 1529 * a SEQINT, so we should restart it when 1530 * we're done. 1531 */ 1532 ahd_unpause(ahd); 1533 } 1534 1535 void 1536 ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) 1537 { 1538 struct scb *scb; 1539 u_int status0; 1540 u_int status3; 1541 u_int status; 1542 u_int lqistat1; 1543 u_int lqostat0; 1544 u_int scbid; 1545 u_int busfreetime; 1546 1547 ahd_update_modes(ahd); 1548 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1549 1550 status3 = ahd_inb(ahd, SSTAT3) & (NTRAMPERR|OSRAMPERR); 1551 status0 = ahd_inb(ahd, SSTAT0) & (IOERR|OVERRUN|SELDI|SELDO); 1552 status = ahd_inb(ahd, SSTAT1) & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR); 1553 lqistat1 = ahd_inb(ahd, LQISTAT1); 1554 lqostat0 = ahd_inb(ahd, LQOSTAT0); 1555 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME; 1556 if ((status0 & (SELDI|SELDO)) != 0) { 1557 u_int simode0; 1558 1559 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 1560 simode0 = ahd_inb(ahd, SIMODE0); 1561 status0 &= simode0 & (IOERR|OVERRUN|SELDI|SELDO); 1562 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1563 } 1564 scbid = ahd_get_scbptr(ahd); 1565 scb = ahd_lookup_scb(ahd, scbid); 1566 if (scb != NULL 1567 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0) 1568 scb = NULL; 1569 1570 if ((status0 & IOERR) != 0) { 1571 u_int now_lvd; 1572 1573 now_lvd = ahd_inb(ahd, SBLKCTL) & ENAB40; 1574 printf("%s: Transceiver State Has Changed to %s mode\n", 1575 ahd_name(ahd), now_lvd ? "LVD" : "SE"); 1576 ahd_outb(ahd, CLRSINT0, CLRIOERR); 1577 /* 1578 * A change in I/O mode is equivalent to a bus reset. 1579 */ 1580 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1581 ahd_pause(ahd); 1582 ahd_setup_iocell_workaround(ahd); 1583 ahd_unpause(ahd); 1584 } else if ((status0 & OVERRUN) != 0) { 1585 1586 printf("%s: SCSI offset overrun detected. Resetting bus.\n", 1587 ahd_name(ahd)); 1588 AHD_CORRECTABLE_ERROR(ahd); 1589 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1590 } else if ((status & SCSIRSTI) != 0) { 1591 1592 printf("%s: Someone reset channel A\n", ahd_name(ahd)); 1593 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/FALSE); 1594 AHD_UNCORRECTABLE_ERROR(ahd); 1595 } else if ((status & SCSIPERR) != 0) { 1596 1597 /* Make sure the sequencer is in a safe location. */ 1598 ahd_clear_critical_section(ahd); 1599 1600 ahd_handle_transmission_error(ahd); 1601 } else if (lqostat0 != 0) { 1602 1603 printf("%s: lqostat0 == 0x%x!\n", ahd_name(ahd), lqostat0); 1604 ahd_outb(ahd, CLRLQOINT0, lqostat0); 1605 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) 1606 ahd_outb(ahd, CLRLQOINT1, 0); 1607 } else if ((status & SELTO) != 0) { 1608 u_int scbid; 1609 1610 /* Stop the selection */ 1611 ahd_outb(ahd, SCSISEQ0, 0); 1612 1613 /* Make sure the sequencer is in a safe location. */ 1614 ahd_clear_critical_section(ahd); 1615 1616 /* No more pending messages */ 1617 ahd_clear_msg_state(ahd); 1618 1619 /* Clear interrupt state */ 1620 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRBUSFREE|CLRSCSIPERR); 1621 1622 /* 1623 * Although the driver does not care about the 1624 * 'Selection in Progress' status bit, the busy 1625 * LED does. SELINGO is only cleared by a successful 1626 * selection, so we must manually clear it to insure 1627 * the LED turns off just incase no future successful 1628 * selections occur (e.g. no devices on the bus). 1629 */ 1630 ahd_outb(ahd, CLRSINT0, CLRSELINGO); 1631 1632 scbid = ahd_inw(ahd, WAITING_TID_HEAD); 1633 scb = ahd_lookup_scb(ahd, scbid); 1634 if (scb == NULL) { 1635 printf("%s: ahd_intr - referenced scb not " 1636 "valid during SELTO scb(0x%x)\n", 1637 ahd_name(ahd), scbid); 1638 ahd_dump_card_state(ahd); 1639 AHD_UNCORRECTABLE_ERROR(ahd); 1640 } else { 1641 struct ahd_devinfo devinfo; 1642 #ifdef AHD_DEBUG 1643 if ((ahd_debug & AHD_SHOW_SELTO) != 0) { 1644 ahd_print_path(ahd, scb); 1645 printf("Saw Selection Timeout for SCB 0x%x\n", 1646 scbid); 1647 } 1648 #endif 1649 ahd_scb_devinfo(ahd, &devinfo, scb); 1650 aic_set_transaction_status(scb, CAM_SEL_TIMEOUT); 1651 ahd_freeze_devq(ahd, scb); 1652 1653 /* 1654 * Cancel any pending transactions on the device 1655 * now that it seems to be missing. This will 1656 * also revert us to async/narrow transfers until 1657 * we can renegotiate with the device. 1658 */ 1659 ahd_handle_devreset(ahd, &devinfo, 1660 CAM_LUN_WILDCARD, 1661 CAM_SEL_TIMEOUT, 1662 "Selection Timeout", 1663 /*verbose_level*/1); 1664 } 1665 ahd_outb(ahd, CLRINT, CLRSCSIINT); 1666 ahd_iocell_first_selection(ahd); 1667 ahd_unpause(ahd); 1668 } else if ((status0 & (SELDI|SELDO)) != 0) { 1669 1670 ahd_iocell_first_selection(ahd); 1671 ahd_unpause(ahd); 1672 } else if (status3 != 0) { 1673 printf("%s: SCSI Cell parity error SSTAT3 == 0x%x\n", 1674 ahd_name(ahd), status3); 1675 AHD_CORRECTABLE_ERROR(ahd); 1676 ahd_outb(ahd, CLRSINT3, status3); 1677 } else if ((lqistat1 & (LQIPHASE_LQ|LQIPHASE_NLQ)) != 0) { 1678 1679 /* Make sure the sequencer is in a safe location. */ 1680 ahd_clear_critical_section(ahd); 1681 1682 ahd_handle_lqiphase_error(ahd, lqistat1); 1683 } else if ((lqistat1 & LQICRCI_NLQ) != 0) { 1684 /* 1685 * This status can be delayed during some 1686 * streaming operations. The SCSIPHASE 1687 * handler has already dealt with this case 1688 * so just clear the error. 1689 */ 1690 ahd_outb(ahd, CLRLQIINT1, CLRLQICRCI_NLQ); 1691 } else if ((status & BUSFREE) != 0 1692 || (lqistat1 & LQOBUSFREE) != 0) { 1693 u_int lqostat1; 1694 int restart; 1695 int clear_fifo; 1696 int packetized; 1697 u_int mode; 1698 1699 /* 1700 * Clear our selection hardware as soon as possible. 1701 * We may have an entry in the waiting Q for this target, 1702 * that is affected by this busfree and we don't want to 1703 * go about selecting the target while we handle the event. 1704 */ 1705 ahd_outb(ahd, SCSISEQ0, 0); 1706 1707 /* Make sure the sequencer is in a safe location. */ 1708 ahd_clear_critical_section(ahd); 1709 1710 /* 1711 * Determine what we were up to at the time of 1712 * the busfree. 1713 */ 1714 mode = AHD_MODE_SCSI; 1715 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME; 1716 lqostat1 = ahd_inb(ahd, LQOSTAT1); 1717 switch (busfreetime) { 1718 case BUSFREE_DFF0: 1719 case BUSFREE_DFF1: 1720 { 1721 u_int scbid; 1722 struct scb *scb; 1723 1724 mode = busfreetime == BUSFREE_DFF0 1725 ? AHD_MODE_DFF0 : AHD_MODE_DFF1; 1726 ahd_set_modes(ahd, mode, mode); 1727 scbid = ahd_get_scbptr(ahd); 1728 scb = ahd_lookup_scb(ahd, scbid); 1729 if (scb == NULL) { 1730 printf("%s: Invalid SCB %d in DFF%d " 1731 "during unexpected busfree\n", 1732 ahd_name(ahd), scbid, mode); 1733 packetized = 0; 1734 AHD_CORRECTABLE_ERROR(ahd); 1735 } else 1736 packetized = (scb->flags & SCB_PACKETIZED) != 0; 1737 clear_fifo = 1; 1738 break; 1739 } 1740 case BUSFREE_LQO: 1741 clear_fifo = 0; 1742 packetized = 1; 1743 break; 1744 default: 1745 clear_fifo = 0; 1746 packetized = (lqostat1 & LQOBUSFREE) != 0; 1747 if (!packetized 1748 && ahd_inb(ahd, LASTPHASE) == P_BUSFREE 1749 && (ahd_inb(ahd, SSTAT0) & SELDI) == 0 1750 && ((ahd_inb(ahd, SSTAT0) & SELDO) == 0 1751 || (ahd_inb(ahd, SCSISEQ0) & ENSELO) == 0)) 1752 /* 1753 * Assume packetized if we are not 1754 * on the bus in a non-packetized 1755 * capacity and any pending selection 1756 * was a packetized selection. 1757 */ 1758 packetized = 1; 1759 break; 1760 } 1761 1762 #ifdef AHD_DEBUG 1763 if ((ahd_debug & AHD_SHOW_MISC) != 0) 1764 printf("Saw Busfree. Busfreetime = 0x%x.\n", 1765 busfreetime); 1766 #endif 1767 /* 1768 * Busfrees that occur in non-packetized phases are 1769 * handled by the nonpkt_busfree handler. 1770 */ 1771 if (packetized && ahd_inb(ahd, LASTPHASE) == P_BUSFREE) { 1772 restart = ahd_handle_pkt_busfree(ahd, busfreetime); 1773 } else { 1774 packetized = 0; 1775 restart = ahd_handle_nonpkt_busfree(ahd); 1776 } 1777 /* 1778 * Clear the busfree interrupt status. The setting of 1779 * the interrupt is a pulse, so in a perfect world, we 1780 * would not need to muck with the ENBUSFREE logic. This 1781 * would ensure that if the bus moves on to another 1782 * connection, busfree protection is still in force. If 1783 * BUSFREEREV is broken, however, we must manually clear 1784 * the ENBUSFREE if the busfree occurred during a non-pack 1785 * connection so that we don't get false positives during 1786 * future, packetized, connections. 1787 */ 1788 ahd_outb(ahd, CLRSINT1, CLRBUSFREE); 1789 if (packetized == 0 1790 && (ahd->bugs & AHD_BUSFREEREV_BUG) != 0) 1791 ahd_outb(ahd, SIMODE1, 1792 ahd_inb(ahd, SIMODE1) & ~ENBUSFREE); 1793 1794 if (clear_fifo) 1795 ahd_clear_fifo(ahd, mode); 1796 1797 ahd_clear_msg_state(ahd); 1798 ahd_outb(ahd, CLRINT, CLRSCSIINT); 1799 if (restart) { 1800 ahd_restart(ahd); 1801 } else { 1802 ahd_unpause(ahd); 1803 } 1804 } else { 1805 printf("%s: Missing case in ahd_handle_scsiint. status = %x\n", 1806 ahd_name(ahd), status); 1807 ahd_dump_card_state(ahd); 1808 ahd_clear_intstat(ahd); 1809 ahd_unpause(ahd); 1810 } 1811 } 1812 1813 static void 1814 ahd_handle_transmission_error(struct ahd_softc *ahd) 1815 { 1816 struct scb *scb; 1817 u_int scbid; 1818 u_int lqistat1; 1819 u_int msg_out; 1820 u_int curphase; 1821 u_int lastphase; 1822 u_int perrdiag; 1823 u_int cur_col; 1824 int silent; 1825 1826 scb = NULL; 1827 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1828 lqistat1 = ahd_inb(ahd, LQISTAT1) & ~(LQIPHASE_LQ|LQIPHASE_NLQ); 1829 ahd_inb(ahd, LQISTAT2); 1830 if ((lqistat1 & (LQICRCI_NLQ|LQICRCI_LQ)) == 0 1831 && (ahd->bugs & AHD_NLQICRC_DELAYED_BUG) != 0) { 1832 u_int lqistate; 1833 1834 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 1835 lqistate = ahd_inb(ahd, LQISTATE); 1836 if ((lqistate >= 0x1E && lqistate <= 0x24) 1837 || (lqistate == 0x29)) { 1838 #ifdef AHD_DEBUG 1839 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1840 printf("%s: NLQCRC found via LQISTATE\n", 1841 ahd_name(ahd)); 1842 } 1843 #endif 1844 lqistat1 |= LQICRCI_NLQ; 1845 } 1846 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1847 } 1848 1849 ahd_outb(ahd, CLRLQIINT1, lqistat1); 1850 lastphase = ahd_inb(ahd, LASTPHASE); 1851 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 1852 perrdiag = ahd_inb(ahd, PERRDIAG); 1853 msg_out = MSG_INITIATOR_DET_ERR; 1854 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR); 1855 1856 /* 1857 * Try to find the SCB associated with this error. 1858 */ 1859 silent = FALSE; 1860 if (lqistat1 == 0 1861 || (lqistat1 & LQICRCI_NLQ) != 0) { 1862 if ((lqistat1 & (LQICRCI_NLQ|LQIOVERI_NLQ)) != 0) 1863 ahd_set_active_fifo(ahd); 1864 scbid = ahd_get_scbptr(ahd); 1865 scb = ahd_lookup_scb(ahd, scbid); 1866 if (scb != NULL && SCB_IS_SILENT(scb)) 1867 silent = TRUE; 1868 } 1869 1870 cur_col = 0; 1871 if (silent == FALSE) { 1872 printf("%s: Transmission error detected\n", ahd_name(ahd)); 1873 ahd_lqistat1_print(lqistat1, &cur_col, 50); 1874 ahd_lastphase_print(lastphase, &cur_col, 50); 1875 ahd_scsisigi_print(curphase, &cur_col, 50); 1876 ahd_perrdiag_print(perrdiag, &cur_col, 50); 1877 printf("\n"); 1878 AHD_CORRECTABLE_ERROR(ahd); 1879 ahd_dump_card_state(ahd); 1880 } 1881 1882 if ((lqistat1 & (LQIOVERI_LQ|LQIOVERI_NLQ)) != 0) { 1883 if (silent == FALSE) { 1884 printf("%s: Gross protocol error during incoming " 1885 "packet. lqistat1 == 0x%x. Resetting bus.\n", 1886 ahd_name(ahd), lqistat1); 1887 AHD_UNCORRECTABLE_ERROR(ahd); 1888 } 1889 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1890 return; 1891 } else if ((lqistat1 & LQICRCI_LQ) != 0) { 1892 /* 1893 * A CRC error has been detected on an incoming LQ. 1894 * The bus is currently hung on the last ACK. 1895 * Hit LQIRETRY to release the last ack, and 1896 * wait for the sequencer to determine that ATNO 1897 * is asserted while in message out to take us 1898 * to our host message loop. No NONPACKREQ or 1899 * LQIPHASE type errors will occur in this 1900 * scenario. After this first LQIRETRY, the LQI 1901 * manager will be in ISELO where it will 1902 * happily sit until another packet phase begins. 1903 * Unexpected bus free detection is enabled 1904 * through any phases that occur after we release 1905 * this last ack until the LQI manager sees a 1906 * packet phase. This implies we may have to 1907 * ignore a perfectly valid "unexected busfree" 1908 * after our "initiator detected error" message is 1909 * sent. A busfree is the expected response after 1910 * we tell the target that it's L_Q was corrupted. 1911 * (SPI4R09 10.7.3.3.3) 1912 */ 1913 ahd_outb(ahd, LQCTL2, LQIRETRY); 1914 printf("LQIRetry for LQICRCI_LQ to release ACK\n"); 1915 AHD_CORRECTABLE_ERROR(ahd); 1916 } else if ((lqistat1 & LQICRCI_NLQ) != 0) { 1917 /* 1918 * We detected a CRC error in a NON-LQ packet. 1919 * The hardware has varying behavior in this situation 1920 * depending on whether this packet was part of a 1921 * stream or not. 1922 * 1923 * PKT by PKT mode: 1924 * The hardware has already acked the complete packet. 1925 * If the target honors our outstanding ATN condition, 1926 * we should be (or soon will be) in MSGOUT phase. 1927 * This will trigger the LQIPHASE_LQ status bit as the 1928 * hardware was expecting another LQ. Unexpected 1929 * busfree detection is enabled. Once LQIPHASE_LQ is 1930 * true (first entry into host message loop is much 1931 * the same), we must clear LQIPHASE_LQ and hit 1932 * LQIRETRY so the hardware is ready to handle 1933 * a future LQ. NONPACKREQ will not be asserted again 1934 * once we hit LQIRETRY until another packet is 1935 * processed. The target may either go busfree 1936 * or start another packet in response to our message. 1937 * 1938 * Read Streaming P0 asserted: 1939 * If we raise ATN and the target completes the entire 1940 * stream (P0 asserted during the last packet), the 1941 * hardware will ack all data and return to the ISTART 1942 * state. When the target reponds to our ATN condition, 1943 * LQIPHASE_LQ will be asserted. We should respond to 1944 * this with an LQIRETRY to prepare for any future 1945 * packets. NONPACKREQ will not be asserted again 1946 * once we hit LQIRETRY until another packet is 1947 * processed. The target may either go busfree or 1948 * start another packet in response to our message. 1949 * Busfree detection is enabled. 1950 * 1951 * Read Streaming P0 not asserted: 1952 * If we raise ATN and the target transitions to 1953 * MSGOUT in or after a packet where P0 is not 1954 * asserted, the hardware will assert LQIPHASE_NLQ. 1955 * We should respond to the LQIPHASE_NLQ with an 1956 * LQIRETRY. Should the target stay in a non-pkt 1957 * phase after we send our message, the hardware 1958 * will assert LQIPHASE_LQ. Recovery is then just as 1959 * listed above for the read streaming with P0 asserted. 1960 * Busfree detection is enabled. 1961 */ 1962 if (silent == FALSE) 1963 printf("LQICRC_NLQ\n"); 1964 if (scb == NULL) { 1965 printf("%s: No SCB valid for LQICRC_NLQ. " 1966 "Resetting bus\n", ahd_name(ahd)); 1967 AHD_UNCORRECTABLE_ERROR(ahd); 1968 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1969 return; 1970 } 1971 } else if ((lqistat1 & LQIBADLQI) != 0) { 1972 printf("Need to handle BADLQI!\n"); 1973 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1974 return; 1975 } else if ((perrdiag & (PARITYERR|PREVPHASE)) == PARITYERR) { 1976 if ((curphase & ~P_DATAIN_DT) != 0) { 1977 /* Ack the byte. So we can continue. */ 1978 if (silent == FALSE) 1979 printf("Acking %s to clear perror\n", 1980 ahd_lookup_phase_entry(curphase)->phasemsg); 1981 ahd_inb(ahd, SCSIDAT); 1982 } 1983 1984 if (curphase == P_MESGIN) 1985 msg_out = MSG_PARITY_ERROR; 1986 } 1987 1988 /* 1989 * We've set the hardware to assert ATN if we 1990 * get a parity error on "in" phases, so all we 1991 * need to do is stuff the message buffer with 1992 * the appropriate message. "In" phases have set 1993 * mesg_out to something other than MSG_NOP. 1994 */ 1995 ahd->send_msg_perror = msg_out; 1996 if (scb != NULL && msg_out == MSG_INITIATOR_DET_ERR) 1997 scb->flags |= SCB_TRANSMISSION_ERROR; 1998 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1999 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2000 ahd_unpause(ahd); 2001 } 2002 2003 static void 2004 ahd_handle_lqiphase_error(struct ahd_softc *ahd, u_int lqistat1) 2005 { 2006 /* 2007 * Clear the sources of the interrupts. 2008 */ 2009 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2010 ahd_outb(ahd, CLRLQIINT1, lqistat1); 2011 2012 /* 2013 * If the "illegal" phase changes were in response 2014 * to our ATN to flag a CRC error, AND we ended up 2015 * on packet boundaries, clear the error, restart the 2016 * LQI manager as appropriate, and go on our merry 2017 * way toward sending the message. Otherwise, reset 2018 * the bus to clear the error. 2019 */ 2020 ahd_set_active_fifo(ahd); 2021 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0 2022 && (ahd_inb(ahd, MDFFSTAT) & DLZERO) != 0) { 2023 if ((lqistat1 & LQIPHASE_LQ) != 0) { 2024 printf("LQIRETRY for LQIPHASE_LQ\n"); 2025 AHD_CORRECTABLE_ERROR(ahd); 2026 ahd_outb(ahd, LQCTL2, LQIRETRY); 2027 } else if ((lqistat1 & LQIPHASE_NLQ) != 0) { 2028 printf("LQIRETRY for LQIPHASE_NLQ\n"); 2029 AHD_CORRECTABLE_ERROR(ahd); 2030 ahd_outb(ahd, LQCTL2, LQIRETRY); 2031 } else 2032 panic("ahd_handle_lqiphase_error: No phase errors\n"); 2033 ahd_dump_card_state(ahd); 2034 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2035 ahd_unpause(ahd); 2036 } else { 2037 printf("Reseting Channel for LQI Phase error\n"); 2038 AHD_CORRECTABLE_ERROR(ahd); 2039 ahd_dump_card_state(ahd); 2040 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 2041 } 2042 } 2043 2044 /* 2045 * Packetized unexpected or expected busfree. 2046 * Entered in mode based on busfreetime. 2047 */ 2048 static int 2049 ahd_handle_pkt_busfree(struct ahd_softc *ahd, u_int busfreetime) 2050 { 2051 u_int lqostat1; 2052 2053 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 2054 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 2055 lqostat1 = ahd_inb(ahd, LQOSTAT1); 2056 if ((lqostat1 & LQOBUSFREE) != 0) { 2057 struct scb *scb; 2058 u_int scbid; 2059 u_int saved_scbptr; 2060 u_int waiting_h; 2061 u_int waiting_t; 2062 u_int next; 2063 2064 /* 2065 * The LQO manager detected an unexpected busfree 2066 * either: 2067 * 2068 * 1) During an outgoing LQ. 2069 * 2) After an outgoing LQ but before the first 2070 * REQ of the command packet. 2071 * 3) During an outgoing command packet. 2072 * 2073 * In all cases, CURRSCB is pointing to the 2074 * SCB that encountered the failure. Clean 2075 * up the queue, clear SELDO and LQOBUSFREE, 2076 * and allow the sequencer to restart the select 2077 * out at its lesure. 2078 */ 2079 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2080 scbid = ahd_inw(ahd, CURRSCB); 2081 scb = ahd_lookup_scb(ahd, scbid); 2082 if (scb == NULL) 2083 panic("SCB not valid during LQOBUSFREE"); 2084 /* 2085 * Clear the status. 2086 */ 2087 ahd_outb(ahd, CLRLQOINT1, CLRLQOBUSFREE); 2088 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) 2089 ahd_outb(ahd, CLRLQOINT1, 0); 2090 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 2091 ahd_flush_device_writes(ahd); 2092 ahd_outb(ahd, CLRSINT0, CLRSELDO); 2093 2094 /* 2095 * Return the LQO manager to its idle loop. It will 2096 * not do this automatically if the busfree occurs 2097 * after the first REQ of either the LQ or command 2098 * packet or between the LQ and command packet. 2099 */ 2100 ahd_outb(ahd, LQCTL2, ahd_inb(ahd, LQCTL2) | LQOTOIDLE); 2101 2102 /* 2103 * Update the waiting for selection queue so 2104 * we restart on the correct SCB. 2105 */ 2106 waiting_h = ahd_inw(ahd, WAITING_TID_HEAD); 2107 saved_scbptr = ahd_get_scbptr(ahd); 2108 if (waiting_h != scbid) { 2109 2110 ahd_outw(ahd, WAITING_TID_HEAD, scbid); 2111 waiting_t = ahd_inw(ahd, WAITING_TID_TAIL); 2112 if (waiting_t == waiting_h) { 2113 ahd_outw(ahd, WAITING_TID_TAIL, scbid); 2114 next = SCB_LIST_NULL; 2115 } else { 2116 ahd_set_scbptr(ahd, waiting_h); 2117 next = ahd_inw_scbram(ahd, SCB_NEXT2); 2118 } 2119 ahd_set_scbptr(ahd, scbid); 2120 ahd_outw(ahd, SCB_NEXT2, next); 2121 } 2122 ahd_set_scbptr(ahd, saved_scbptr); 2123 if (scb->crc_retry_count < AHD_MAX_LQ_CRC_ERRORS) { 2124 if (SCB_IS_SILENT(scb) == FALSE) { 2125 ahd_print_path(ahd, scb); 2126 printf("Probable outgoing LQ CRC error. " 2127 "Retrying command\n"); 2128 AHD_CORRECTABLE_ERROR(ahd); 2129 } 2130 scb->crc_retry_count++; 2131 } else { 2132 aic_set_transaction_status(scb, CAM_UNCOR_PARITY); 2133 aic_freeze_scb(scb); 2134 ahd_freeze_devq(ahd, scb); 2135 } 2136 /* Return unpausing the sequencer. */ 2137 return (0); 2138 } else if ((ahd_inb(ahd, PERRDIAG) & PARITYERR) != 0) { 2139 /* 2140 * Ignore what are really parity errors that 2141 * occur on the last REQ of a free running 2142 * clock prior to going busfree. Some drives 2143 * do not properly active negate just before 2144 * going busfree resulting in a parity glitch. 2145 */ 2146 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR|CLRBUSFREE); 2147 #ifdef AHD_DEBUG 2148 if ((ahd_debug & AHD_SHOW_MASKED_ERRORS) != 0) 2149 printf("%s: Parity on last REQ detected " 2150 "during busfree phase.\n", 2151 ahd_name(ahd)); 2152 #endif 2153 /* Return unpausing the sequencer. */ 2154 return (0); 2155 } 2156 if (ahd->src_mode != AHD_MODE_SCSI) { 2157 u_int scbid; 2158 struct scb *scb; 2159 2160 scbid = ahd_get_scbptr(ahd); 2161 scb = ahd_lookup_scb(ahd, scbid); 2162 ahd_print_path(ahd, scb); 2163 printf("Unexpected PKT busfree condition\n"); 2164 AHD_UNCORRECTABLE_ERROR(ahd); 2165 ahd_dump_card_state(ahd); 2166 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 'A', 2167 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 2168 ROLE_INITIATOR, CAM_UNEXP_BUSFREE); 2169 2170 /* Return restarting the sequencer. */ 2171 return (1); 2172 } 2173 printf("%s: Unexpected PKT busfree condition\n", ahd_name(ahd)); 2174 AHD_UNCORRECTABLE_ERROR(ahd); 2175 ahd_dump_card_state(ahd); 2176 /* Restart the sequencer. */ 2177 return (1); 2178 } 2179 2180 /* 2181 * Non-packetized unexpected or expected busfree. 2182 */ 2183 static int 2184 ahd_handle_nonpkt_busfree(struct ahd_softc *ahd) 2185 { 2186 struct ahd_devinfo devinfo; 2187 struct scb *scb; 2188 u_int lastphase; 2189 u_int saved_scsiid; 2190 u_int saved_lun; 2191 u_int target; 2192 u_int initiator_role_id; 2193 u_int scbid; 2194 u_int ppr_busfree; 2195 int printerror; 2196 2197 /* 2198 * Look at what phase we were last in. If its message out, 2199 * chances are pretty good that the busfree was in response 2200 * to one of our abort requests. 2201 */ 2202 lastphase = ahd_inb(ahd, LASTPHASE); 2203 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID); 2204 saved_lun = ahd_inb(ahd, SAVED_LUN); 2205 target = SCSIID_TARGET(ahd, saved_scsiid); 2206 initiator_role_id = SCSIID_OUR_ID(saved_scsiid); 2207 ahd_compile_devinfo(&devinfo, initiator_role_id, 2208 target, saved_lun, 'A', ROLE_INITIATOR); 2209 printerror = 1; 2210 2211 scbid = ahd_get_scbptr(ahd); 2212 scb = ahd_lookup_scb(ahd, scbid); 2213 if (scb != NULL 2214 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0) 2215 scb = NULL; 2216 2217 ppr_busfree = (ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0; 2218 if (lastphase == P_MESGOUT) { 2219 u_int tag; 2220 2221 tag = SCB_LIST_NULL; 2222 if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT_TAG, TRUE) 2223 || ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT, TRUE)) { 2224 int found; 2225 int sent_msg; 2226 2227 if (scb == NULL) { 2228 ahd_print_devinfo(ahd, &devinfo); 2229 printf("Abort for unidentified " 2230 "connection completed.\n"); 2231 /* restart the sequencer. */ 2232 return (1); 2233 } 2234 sent_msg = ahd->msgout_buf[ahd->msgout_index - 1]; 2235 ahd_print_path(ahd, scb); 2236 printf("SCB %d - Abort%s Completed.\n", 2237 SCB_GET_TAG(scb), 2238 sent_msg == MSG_ABORT_TAG ? "" : " Tag"); 2239 2240 if (sent_msg == MSG_ABORT_TAG) 2241 tag = SCB_GET_TAG(scb); 2242 2243 if ((scb->flags & SCB_CMDPHASE_ABORT) != 0) { 2244 /* 2245 * This abort is in response to an 2246 * unexpected switch to command phase 2247 * for a packetized connection. Since 2248 * the identify message was never sent, 2249 * "saved lun" is 0. We really want to 2250 * abort only the SCB that encountered 2251 * this error, which could have a different 2252 * lun. The SCB will be retried so the OS 2253 * will see the UA after renegotiating to 2254 * packetized. 2255 */ 2256 tag = SCB_GET_TAG(scb); 2257 saved_lun = scb->hscb->lun; 2258 } 2259 found = ahd_abort_scbs(ahd, target, 'A', saved_lun, 2260 tag, ROLE_INITIATOR, 2261 CAM_REQ_ABORTED); 2262 printf("found == 0x%x\n", found); 2263 printerror = 0; 2264 } else if (ahd_sent_msg(ahd, AHDMSG_1B, 2265 MSG_BUS_DEV_RESET, TRUE)) { 2266 #ifdef __FreeBSD__ 2267 /* 2268 * Don't mark the user's request for this BDR 2269 * as completing with CAM_BDR_SENT. CAM3 2270 * specifies CAM_REQ_CMP. 2271 */ 2272 if (scb != NULL 2273 && scb->io_ctx->ccb_h.func_code== XPT_RESET_DEV 2274 && ahd_match_scb(ahd, scb, target, 'A', 2275 CAM_LUN_WILDCARD, SCB_LIST_NULL, 2276 ROLE_INITIATOR)) 2277 aic_set_transaction_status(scb, CAM_REQ_CMP); 2278 #endif 2279 ahd_handle_devreset(ahd, &devinfo, CAM_LUN_WILDCARD, 2280 CAM_BDR_SENT, "Bus Device Reset", 2281 /*verbose_level*/0); 2282 printerror = 0; 2283 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, FALSE) 2284 && ppr_busfree == 0) { 2285 struct ahd_initiator_tinfo *tinfo; 2286 struct ahd_tmode_tstate *tstate; 2287 2288 /* 2289 * PPR Rejected. 2290 * 2291 * If the previous negotiation was packetized, 2292 * this could be because the device has been 2293 * reset without our knowledge. Force our 2294 * current negotiation to async and retry the 2295 * negotiation. Otherwise retry the command 2296 * with non-ppr negotiation. 2297 */ 2298 #ifdef AHD_DEBUG 2299 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2300 printf("PPR negotiation rejected busfree.\n"); 2301 #endif 2302 tinfo = ahd_fetch_transinfo(ahd, devinfo.channel, 2303 devinfo.our_scsiid, 2304 devinfo.target, &tstate); 2305 if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ)!=0) { 2306 ahd_set_width(ahd, &devinfo, 2307 MSG_EXT_WDTR_BUS_8_BIT, 2308 AHD_TRANS_CUR, 2309 /*paused*/TRUE); 2310 ahd_set_syncrate(ahd, &devinfo, 2311 /*period*/0, /*offset*/0, 2312 /*ppr_options*/0, 2313 AHD_TRANS_CUR, 2314 /*paused*/TRUE); 2315 /* 2316 * The expect PPR busfree handler below 2317 * will effect the retry and necessary 2318 * abort. 2319 */ 2320 } else { 2321 tinfo->curr.transport_version = 2; 2322 tinfo->goal.transport_version = 2; 2323 tinfo->goal.ppr_options = 0; 2324 /* 2325 * Remove any SCBs in the waiting for selection 2326 * queue that may also be for this target so 2327 * that command ordering is preserved. 2328 */ 2329 ahd_freeze_devq(ahd, scb); 2330 ahd_qinfifo_requeue_tail(ahd, scb); 2331 printerror = 0; 2332 } 2333 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, FALSE) 2334 && ppr_busfree == 0) { 2335 /* 2336 * Negotiation Rejected. Go-narrow and 2337 * retry command. 2338 */ 2339 #ifdef AHD_DEBUG 2340 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2341 printf("WDTR negotiation rejected busfree.\n"); 2342 #endif 2343 ahd_set_width(ahd, &devinfo, 2344 MSG_EXT_WDTR_BUS_8_BIT, 2345 AHD_TRANS_CUR|AHD_TRANS_GOAL, 2346 /*paused*/TRUE); 2347 /* 2348 * Remove any SCBs in the waiting for selection 2349 * queue that may also be for this target so that 2350 * command ordering is preserved. 2351 */ 2352 ahd_freeze_devq(ahd, scb); 2353 ahd_qinfifo_requeue_tail(ahd, scb); 2354 printerror = 0; 2355 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, FALSE) 2356 && ppr_busfree == 0) { 2357 /* 2358 * Negotiation Rejected. Go-async and 2359 * retry command. 2360 */ 2361 #ifdef AHD_DEBUG 2362 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2363 printf("SDTR negotiation rejected busfree.\n"); 2364 #endif 2365 ahd_set_syncrate(ahd, &devinfo, 2366 /*period*/0, /*offset*/0, 2367 /*ppr_options*/0, 2368 AHD_TRANS_CUR|AHD_TRANS_GOAL, 2369 /*paused*/TRUE); 2370 /* 2371 * Remove any SCBs in the waiting for selection 2372 * queue that may also be for this target so that 2373 * command ordering is preserved. 2374 */ 2375 ahd_freeze_devq(ahd, scb); 2376 ahd_qinfifo_requeue_tail(ahd, scb); 2377 printerror = 0; 2378 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_IDE_BUSFREE) != 0 2379 && ahd_sent_msg(ahd, AHDMSG_1B, 2380 MSG_INITIATOR_DET_ERR, TRUE)) { 2381 2382 #ifdef AHD_DEBUG 2383 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2384 printf("Expected IDE Busfree\n"); 2385 #endif 2386 printerror = 0; 2387 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_QASREJ_BUSFREE) 2388 && ahd_sent_msg(ahd, AHDMSG_1B, 2389 MSG_MESSAGE_REJECT, TRUE)) { 2390 2391 #ifdef AHD_DEBUG 2392 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2393 printf("Expected QAS Reject Busfree\n"); 2394 #endif 2395 printerror = 0; 2396 } 2397 } 2398 2399 /* 2400 * The busfree required flag is honored at the end of 2401 * the message phases. We check it last in case we 2402 * had to send some other message that caused a busfree. 2403 */ 2404 if (printerror != 0 2405 && (lastphase == P_MESGIN || lastphase == P_MESGOUT) 2406 && ((ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0)) { 2407 2408 ahd_freeze_devq(ahd, scb); 2409 aic_set_transaction_status(scb, CAM_REQUEUE_REQ); 2410 aic_freeze_scb(scb); 2411 if ((ahd->msg_flags & MSG_FLAG_IU_REQ_CHANGED) != 0) { 2412 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 2413 SCB_GET_CHANNEL(ahd, scb), 2414 SCB_GET_LUN(scb), SCB_LIST_NULL, 2415 ROLE_INITIATOR, CAM_REQ_ABORTED); 2416 } else { 2417 #ifdef AHD_DEBUG 2418 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2419 printf("PPR Negotiation Busfree.\n"); 2420 #endif 2421 ahd_done(ahd, scb); 2422 } 2423 printerror = 0; 2424 } 2425 if (printerror != 0) { 2426 int aborted; 2427 2428 aborted = 0; 2429 if (scb != NULL) { 2430 u_int tag; 2431 2432 if ((scb->hscb->control & TAG_ENB) != 0) 2433 tag = SCB_GET_TAG(scb); 2434 else 2435 tag = SCB_LIST_NULL; 2436 ahd_print_path(ahd, scb); 2437 aborted = ahd_abort_scbs(ahd, target, 'A', 2438 SCB_GET_LUN(scb), tag, 2439 ROLE_INITIATOR, 2440 CAM_UNEXP_BUSFREE); 2441 } else { 2442 /* 2443 * We had not fully identified this connection, 2444 * so we cannot abort anything. 2445 */ 2446 printf("%s: ", ahd_name(ahd)); 2447 } 2448 printf("Unexpected busfree %s, %d SCBs aborted, " 2449 "PRGMCNT == 0x%x\n", 2450 ahd_lookup_phase_entry(lastphase)->phasemsg, 2451 aborted, 2452 ahd_inw(ahd, PRGMCNT)); 2453 AHD_UNCORRECTABLE_ERROR(ahd); 2454 ahd_dump_card_state(ahd); 2455 if (lastphase != P_BUSFREE) 2456 ahd_force_renegotiation(ahd, &devinfo); 2457 } 2458 /* Always restart the sequencer. */ 2459 return (1); 2460 } 2461 2462 static void 2463 ahd_handle_proto_violation(struct ahd_softc *ahd) 2464 { 2465 struct ahd_devinfo devinfo; 2466 struct scb *scb; 2467 u_int scbid; 2468 u_int seq_flags; 2469 u_int curphase; 2470 u_int lastphase; 2471 int found; 2472 2473 ahd_fetch_devinfo(ahd, &devinfo); 2474 scbid = ahd_get_scbptr(ahd); 2475 scb = ahd_lookup_scb(ahd, scbid); 2476 seq_flags = ahd_inb(ahd, SEQ_FLAGS); 2477 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 2478 lastphase = ahd_inb(ahd, LASTPHASE); 2479 if ((seq_flags & NOT_IDENTIFIED) != 0) { 2480 2481 /* 2482 * The reconnecting target either did not send an 2483 * identify message, or did, but we didn't find an SCB 2484 * to match. 2485 */ 2486 ahd_print_devinfo(ahd, &devinfo); 2487 printf("Target did not send an IDENTIFY message. " 2488 "LASTPHASE = 0x%x.\n", lastphase); 2489 AHD_UNCORRECTABLE_ERROR(ahd); 2490 scb = NULL; 2491 } else if (scb == NULL) { 2492 /* 2493 * We don't seem to have an SCB active for this 2494 * transaction. Print an error and reset the bus. 2495 */ 2496 ahd_print_devinfo(ahd, &devinfo); 2497 printf("No SCB found during protocol violation\n"); 2498 AHD_UNCORRECTABLE_ERROR(ahd); 2499 goto proto_violation_reset; 2500 } else { 2501 aic_set_transaction_status(scb, CAM_SEQUENCE_FAIL); 2502 if ((seq_flags & NO_CDB_SENT) != 0) { 2503 ahd_print_path(ahd, scb); 2504 printf("No or incomplete CDB sent to device.\n"); 2505 AHD_UNCORRECTABLE_ERROR(ahd); 2506 } else if ((ahd_inb_scbram(ahd, SCB_CONTROL) 2507 & STATUS_RCVD) == 0) { 2508 /* 2509 * The target never bothered to provide status to 2510 * us prior to completing the command. Since we don't 2511 * know the disposition of this command, we must attempt 2512 * to abort it. Assert ATN and prepare to send an abort 2513 * message. 2514 */ 2515 ahd_print_path(ahd, scb); 2516 printf("Completed command without status.\n"); 2517 } else { 2518 ahd_print_path(ahd, scb); 2519 printf("Unknown protocol violation.\n"); 2520 AHD_UNCORRECTABLE_ERROR(ahd); 2521 ahd_dump_card_state(ahd); 2522 } 2523 } 2524 if ((lastphase & ~P_DATAIN_DT) == 0 2525 || lastphase == P_COMMAND) { 2526 proto_violation_reset: 2527 /* 2528 * Target either went directly to data 2529 * phase or didn't respond to our ATN. 2530 * The only safe thing to do is to blow 2531 * it away with a bus reset. 2532 */ 2533 found = ahd_reset_channel(ahd, 'A', TRUE); 2534 printf("%s: Issued Channel %c Bus Reset. " 2535 "%d SCBs aborted\n", ahd_name(ahd), 'A', found); 2536 AHD_UNCORRECTABLE_ERROR(ahd); 2537 } else { 2538 /* 2539 * Leave the selection hardware off in case 2540 * this abort attempt will affect yet to 2541 * be sent commands. 2542 */ 2543 ahd_outb(ahd, SCSISEQ0, 2544 ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 2545 ahd_assert_atn(ahd); 2546 ahd_outb(ahd, MSG_OUT, HOST_MSG); 2547 if (scb == NULL) { 2548 ahd_print_devinfo(ahd, &devinfo); 2549 ahd->msgout_buf[0] = MSG_ABORT_TASK; 2550 ahd->msgout_len = 1; 2551 ahd->msgout_index = 0; 2552 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 2553 } else { 2554 ahd_print_path(ahd, scb); 2555 scb->flags |= SCB_ABORT; 2556 } 2557 printf("Protocol violation %s. Attempting to abort.\n", 2558 ahd_lookup_phase_entry(curphase)->phasemsg); 2559 AHD_UNCORRECTABLE_ERROR(ahd); 2560 } 2561 } 2562 2563 /* 2564 * Force renegotiation to occur the next time we initiate 2565 * a command to the current device. 2566 */ 2567 static void 2568 ahd_force_renegotiation(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 2569 { 2570 struct ahd_initiator_tinfo *targ_info; 2571 struct ahd_tmode_tstate *tstate; 2572 2573 #ifdef AHD_DEBUG 2574 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 2575 ahd_print_devinfo(ahd, devinfo); 2576 printf("Forcing renegotiation\n"); 2577 } 2578 #endif 2579 targ_info = ahd_fetch_transinfo(ahd, 2580 devinfo->channel, 2581 devinfo->our_scsiid, 2582 devinfo->target, 2583 &tstate); 2584 ahd_update_neg_request(ahd, devinfo, tstate, 2585 targ_info, AHD_NEG_IF_NON_ASYNC); 2586 } 2587 2588 #define AHD_MAX_STEPS 2000 2589 void 2590 ahd_clear_critical_section(struct ahd_softc *ahd) 2591 { 2592 ahd_mode_state saved_modes; 2593 int stepping; 2594 int steps; 2595 int first_instr; 2596 u_int simode0; 2597 u_int simode1; 2598 u_int simode3; 2599 u_int lqimode0; 2600 u_int lqimode1; 2601 u_int lqomode0; 2602 u_int lqomode1; 2603 2604 if (ahd->num_critical_sections == 0) 2605 return; 2606 2607 stepping = FALSE; 2608 steps = 0; 2609 first_instr = 0; 2610 simode0 = 0; 2611 simode1 = 0; 2612 simode3 = 0; 2613 lqimode0 = 0; 2614 lqimode1 = 0; 2615 lqomode0 = 0; 2616 lqomode1 = 0; 2617 saved_modes = ahd_save_modes(ahd); 2618 for (;;) { 2619 struct cs *cs; 2620 u_int seqaddr; 2621 u_int i; 2622 2623 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2624 seqaddr = ahd_inw(ahd, CURADDR); 2625 2626 cs = ahd->critical_sections; 2627 for (i = 0; i < ahd->num_critical_sections; i++, cs++) { 2628 2629 if (cs->begin < seqaddr && cs->end >= seqaddr) 2630 break; 2631 } 2632 2633 if (i == ahd->num_critical_sections) 2634 break; 2635 2636 if (steps > AHD_MAX_STEPS) { 2637 printf("%s: Infinite loop in critical section\n" 2638 "%s: First Instruction 0x%x now 0x%x\n", 2639 ahd_name(ahd), ahd_name(ahd), first_instr, 2640 seqaddr); 2641 AHD_FATAL_ERROR(ahd); 2642 ahd_dump_card_state(ahd); 2643 panic("critical section loop"); 2644 } 2645 2646 steps++; 2647 #ifdef AHD_DEBUG 2648 if ((ahd_debug & AHD_SHOW_MISC) != 0) 2649 printf("%s: Single stepping at 0x%x\n", ahd_name(ahd), 2650 seqaddr); 2651 #endif 2652 if (stepping == FALSE) { 2653 2654 first_instr = seqaddr; 2655 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 2656 simode0 = ahd_inb(ahd, SIMODE0); 2657 simode3 = ahd_inb(ahd, SIMODE3); 2658 lqimode0 = ahd_inb(ahd, LQIMODE0); 2659 lqimode1 = ahd_inb(ahd, LQIMODE1); 2660 lqomode0 = ahd_inb(ahd, LQOMODE0); 2661 lqomode1 = ahd_inb(ahd, LQOMODE1); 2662 ahd_outb(ahd, SIMODE0, 0); 2663 ahd_outb(ahd, SIMODE3, 0); 2664 ahd_outb(ahd, LQIMODE0, 0); 2665 ahd_outb(ahd, LQIMODE1, 0); 2666 ahd_outb(ahd, LQOMODE0, 0); 2667 ahd_outb(ahd, LQOMODE1, 0); 2668 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2669 simode1 = ahd_inb(ahd, SIMODE1); 2670 /* 2671 * We don't clear ENBUSFREE. Unfortunately 2672 * we cannot re-enable busfree detection within 2673 * the current connection, so we must leave it 2674 * on while single stepping. 2675 */ 2676 ahd_outb(ahd, SIMODE1, simode1 & ENBUSFREE); 2677 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) | STEP); 2678 stepping = TRUE; 2679 } 2680 ahd_outb(ahd, CLRSINT1, CLRBUSFREE); 2681 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2682 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode); 2683 ahd_outb(ahd, HCNTRL, ahd->unpause); 2684 while (!ahd_is_paused(ahd)) 2685 aic_delay(200); 2686 ahd_update_modes(ahd); 2687 } 2688 if (stepping) { 2689 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 2690 ahd_outb(ahd, SIMODE0, simode0); 2691 ahd_outb(ahd, SIMODE3, simode3); 2692 ahd_outb(ahd, LQIMODE0, lqimode0); 2693 ahd_outb(ahd, LQIMODE1, lqimode1); 2694 ahd_outb(ahd, LQOMODE0, lqomode0); 2695 ahd_outb(ahd, LQOMODE1, lqomode1); 2696 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2697 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) & ~STEP); 2698 ahd_outb(ahd, SIMODE1, simode1); 2699 /* 2700 * SCSIINT seems to glitch occasionally when 2701 * the interrupt masks are restored. Clear SCSIINT 2702 * one more time so that only persistent errors 2703 * are seen as a real interrupt. 2704 */ 2705 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2706 } 2707 ahd_restore_modes(ahd, saved_modes); 2708 } 2709 2710 /* 2711 * Clear any pending interrupt status. 2712 */ 2713 void 2714 ahd_clear_intstat(struct ahd_softc *ahd) 2715 { 2716 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 2717 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 2718 /* Clear any interrupt conditions this may have caused */ 2719 ahd_outb(ahd, CLRLQIINT0, CLRLQIATNQAS|CLRLQICRCT1|CLRLQICRCT2 2720 |CLRLQIBADLQT|CLRLQIATNLQ|CLRLQIATNCMD); 2721 ahd_outb(ahd, CLRLQIINT1, CLRLQIPHASE_LQ|CLRLQIPHASE_NLQ|CLRLIQABORT 2722 |CLRLQICRCI_LQ|CLRLQICRCI_NLQ|CLRLQIBADLQI 2723 |CLRLQIOVERI_LQ|CLRLQIOVERI_NLQ|CLRNONPACKREQ); 2724 ahd_outb(ahd, CLRLQOINT0, CLRLQOTARGSCBPERR|CLRLQOSTOPT2|CLRLQOATNLQ 2725 |CLRLQOATNPKT|CLRLQOTCRC); 2726 ahd_outb(ahd, CLRLQOINT1, CLRLQOINITSCBPERR|CLRLQOSTOPI2|CLRLQOBADQAS 2727 |CLRLQOBUSFREE|CLRLQOPHACHGINPKT); 2728 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) { 2729 ahd_outb(ahd, CLRLQOINT0, 0); 2730 ahd_outb(ahd, CLRLQOINT1, 0); 2731 } 2732 ahd_outb(ahd, CLRSINT3, CLRNTRAMPERR|CLROSRAMPERR); 2733 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRATNO|CLRSCSIRSTI 2734 |CLRBUSFREE|CLRSCSIPERR|CLRREQINIT); 2735 ahd_outb(ahd, CLRSINT0, CLRSELDO|CLRSELDI|CLRSELINGO 2736 |CLRIOERR|CLROVERRUN); 2737 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2738 } 2739 2740 /**************************** Debugging Routines ******************************/ 2741 #ifdef AHD_DEBUG 2742 uint32_t ahd_debug = AHD_DEBUG_OPTS; 2743 #endif 2744 void 2745 ahd_print_scb(struct scb *scb) 2746 { 2747 struct hardware_scb *hscb; 2748 int i; 2749 2750 hscb = scb->hscb; 2751 printf("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n", 2752 (void *)scb, 2753 hscb->control, 2754 hscb->scsiid, 2755 hscb->lun, 2756 hscb->cdb_len); 2757 printf("Shared Data: "); 2758 for (i = 0; i < sizeof(hscb->shared_data.idata.cdb); i++) 2759 printf("%#02x", hscb->shared_data.idata.cdb[i]); 2760 printf(" dataptr:%#x%x datacnt:%#x sgptr:%#x tag:%#x\n", 2761 (uint32_t)((aic_le64toh(hscb->dataptr) >> 32) & 0xFFFFFFFF), 2762 (uint32_t)(aic_le64toh(hscb->dataptr) & 0xFFFFFFFF), 2763 aic_le32toh(hscb->datacnt), 2764 aic_le32toh(hscb->sgptr), 2765 SCB_GET_TAG(scb)); 2766 ahd_dump_sglist(scb); 2767 } 2768 2769 void 2770 ahd_dump_sglist(struct scb *scb) 2771 { 2772 int i; 2773 2774 if (scb->sg_count > 0) { 2775 if ((scb->ahd_softc->flags & AHD_64BIT_ADDRESSING) != 0) { 2776 struct ahd_dma64_seg *sg_list; 2777 2778 sg_list = (struct ahd_dma64_seg*)scb->sg_list; 2779 for (i = 0; i < scb->sg_count; i++) { 2780 uint64_t addr; 2781 2782 addr = aic_le64toh(sg_list[i].addr); 2783 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n", 2784 i, 2785 (uint32_t)((addr >> 32) & 0xFFFFFFFF), 2786 (uint32_t)(addr & 0xFFFFFFFF), 2787 sg_list[i].len & AHD_SG_LEN_MASK, 2788 (sg_list[i].len & AHD_DMA_LAST_SEG) 2789 ? " Last" : ""); 2790 } 2791 } else { 2792 struct ahd_dma_seg *sg_list; 2793 2794 sg_list = (struct ahd_dma_seg*)scb->sg_list; 2795 for (i = 0; i < scb->sg_count; i++) { 2796 uint32_t len; 2797 2798 len = aic_le32toh(sg_list[i].len); 2799 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n", 2800 i, 2801 (len & AHD_SG_HIGH_ADDR_MASK) >> 24, 2802 aic_le32toh(sg_list[i].addr), 2803 len & AHD_SG_LEN_MASK, 2804 len & AHD_DMA_LAST_SEG ? " Last" : ""); 2805 } 2806 } 2807 } 2808 } 2809 2810 /************************* Transfer Negotiation *******************************/ 2811 /* 2812 * Allocate per target mode instance (ID we respond to as a target) 2813 * transfer negotiation data structures. 2814 */ 2815 static struct ahd_tmode_tstate * 2816 ahd_alloc_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel) 2817 { 2818 struct ahd_tmode_tstate *master_tstate; 2819 struct ahd_tmode_tstate *tstate; 2820 int i; 2821 2822 master_tstate = ahd->enabled_targets[ahd->our_id]; 2823 if (ahd->enabled_targets[scsi_id] != NULL 2824 && ahd->enabled_targets[scsi_id] != master_tstate) 2825 panic("%s: ahd_alloc_tstate - Target already allocated", 2826 ahd_name(ahd)); 2827 tstate = malloc(sizeof(*tstate), M_DEVBUF, M_NOWAIT); 2828 if (tstate == NULL) 2829 return (NULL); 2830 2831 /* 2832 * If we have allocated a master tstate, copy user settings from 2833 * the master tstate (taken from SRAM or the EEPROM) for this 2834 * channel, but reset our current and goal settings to async/narrow 2835 * until an initiator talks to us. 2836 */ 2837 if (master_tstate != NULL) { 2838 memcpy(tstate, master_tstate, sizeof(*tstate)); 2839 memset(tstate->enabled_luns, 0, sizeof(tstate->enabled_luns)); 2840 for (i = 0; i < 16; i++) { 2841 memset(&tstate->transinfo[i].curr, 0, 2842 sizeof(tstate->transinfo[i].curr)); 2843 memset(&tstate->transinfo[i].goal, 0, 2844 sizeof(tstate->transinfo[i].goal)); 2845 } 2846 } else 2847 memset(tstate, 0, sizeof(*tstate)); 2848 ahd->enabled_targets[scsi_id] = tstate; 2849 return (tstate); 2850 } 2851 2852 #ifdef AHD_TARGET_MODE 2853 /* 2854 * Free per target mode instance (ID we respond to as a target) 2855 * transfer negotiation data structures. 2856 */ 2857 static void 2858 ahd_free_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel, int force) 2859 { 2860 struct ahd_tmode_tstate *tstate; 2861 2862 /* 2863 * Don't clean up our "master" tstate. 2864 * It has our default user settings. 2865 */ 2866 if (scsi_id == ahd->our_id 2867 && force == FALSE) 2868 return; 2869 2870 tstate = ahd->enabled_targets[scsi_id]; 2871 if (tstate != NULL) 2872 free(tstate, M_DEVBUF); 2873 ahd->enabled_targets[scsi_id] = NULL; 2874 } 2875 #endif 2876 2877 /* 2878 * Called when we have an active connection to a target on the bus, 2879 * this function finds the nearest period to the input period limited 2880 * by the capabilities of the bus connectivity of and sync settings for 2881 * the target. 2882 */ 2883 void 2884 ahd_devlimited_syncrate(struct ahd_softc *ahd, 2885 struct ahd_initiator_tinfo *tinfo, 2886 u_int *period, u_int *ppr_options, role_t role) 2887 { 2888 struct ahd_transinfo *transinfo; 2889 u_int maxsync; 2890 2891 if ((ahd_inb(ahd, SBLKCTL) & ENAB40) != 0 2892 && (ahd_inb(ahd, SSTAT2) & EXP_ACTIVE) == 0) { 2893 maxsync = AHD_SYNCRATE_PACED; 2894 } else { 2895 maxsync = AHD_SYNCRATE_ULTRA; 2896 /* Can't do DT related options on an SE bus */ 2897 *ppr_options &= MSG_EXT_PPR_QAS_REQ; 2898 } 2899 /* 2900 * Never allow a value higher than our current goal 2901 * period otherwise we may allow a target initiated 2902 * negotiation to go above the limit as set by the 2903 * user. In the case of an initiator initiated 2904 * sync negotiation, we limit based on the user 2905 * setting. This allows the system to still accept 2906 * incoming negotiations even if target initiated 2907 * negotiation is not performed. 2908 */ 2909 if (role == ROLE_TARGET) 2910 transinfo = &tinfo->user; 2911 else 2912 transinfo = &tinfo->goal; 2913 *ppr_options &= (transinfo->ppr_options|MSG_EXT_PPR_PCOMP_EN); 2914 if (transinfo->width == MSG_EXT_WDTR_BUS_8_BIT) { 2915 maxsync = MAX(maxsync, AHD_SYNCRATE_ULTRA2); 2916 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 2917 } 2918 if (transinfo->period == 0) { 2919 *period = 0; 2920 *ppr_options = 0; 2921 } else { 2922 *period = MAX(*period, transinfo->period); 2923 ahd_find_syncrate(ahd, period, ppr_options, maxsync); 2924 } 2925 } 2926 2927 /* 2928 * Look up the valid period to SCSIRATE conversion in our table. 2929 * Return the period and offset that should be sent to the target 2930 * if this was the beginning of an SDTR. 2931 */ 2932 void 2933 ahd_find_syncrate(struct ahd_softc *ahd, u_int *period, 2934 u_int *ppr_options, u_int maxsync) 2935 { 2936 if (*period < maxsync) 2937 *period = maxsync; 2938 2939 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) != 0 2940 && *period > AHD_SYNCRATE_MIN_DT) 2941 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 2942 2943 if (*period > AHD_SYNCRATE_MIN) 2944 *period = 0; 2945 2946 /* Honor PPR option conformance rules. */ 2947 if (*period > AHD_SYNCRATE_PACED) 2948 *ppr_options &= ~MSG_EXT_PPR_RTI; 2949 2950 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0) 2951 *ppr_options &= (MSG_EXT_PPR_DT_REQ|MSG_EXT_PPR_QAS_REQ); 2952 2953 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0) 2954 *ppr_options &= MSG_EXT_PPR_QAS_REQ; 2955 2956 /* Skip all PACED only entries if IU is not available */ 2957 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0 2958 && *period < AHD_SYNCRATE_DT) 2959 *period = AHD_SYNCRATE_DT; 2960 2961 /* Skip all DT only entries if DT is not available */ 2962 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0 2963 && *period < AHD_SYNCRATE_ULTRA2) 2964 *period = AHD_SYNCRATE_ULTRA2; 2965 } 2966 2967 /* 2968 * Truncate the given synchronous offset to a value the 2969 * current adapter type and syncrate are capable of. 2970 */ 2971 void 2972 ahd_validate_offset(struct ahd_softc *ahd, 2973 struct ahd_initiator_tinfo *tinfo, 2974 u_int period, u_int *offset, int wide, 2975 role_t role) 2976 { 2977 u_int maxoffset; 2978 2979 /* Limit offset to what we can do */ 2980 if (period == 0) 2981 maxoffset = 0; 2982 else if (period <= AHD_SYNCRATE_PACED) { 2983 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) 2984 maxoffset = MAX_OFFSET_PACED_BUG; 2985 else 2986 maxoffset = MAX_OFFSET_PACED; 2987 } else 2988 maxoffset = MAX_OFFSET_NON_PACED; 2989 *offset = MIN(*offset, maxoffset); 2990 if (tinfo != NULL) { 2991 if (role == ROLE_TARGET) 2992 *offset = MIN(*offset, tinfo->user.offset); 2993 else 2994 *offset = MIN(*offset, tinfo->goal.offset); 2995 } 2996 } 2997 2998 /* 2999 * Truncate the given transfer width parameter to a value the 3000 * current adapter type is capable of. 3001 */ 3002 void 3003 ahd_validate_width(struct ahd_softc *ahd, struct ahd_initiator_tinfo *tinfo, 3004 u_int *bus_width, role_t role) 3005 { 3006 switch (*bus_width) { 3007 default: 3008 if (ahd->features & AHD_WIDE) { 3009 /* Respond Wide */ 3010 *bus_width = MSG_EXT_WDTR_BUS_16_BIT; 3011 break; 3012 } 3013 /* FALLTHROUGH */ 3014 case MSG_EXT_WDTR_BUS_8_BIT: 3015 *bus_width = MSG_EXT_WDTR_BUS_8_BIT; 3016 break; 3017 } 3018 if (tinfo != NULL) { 3019 if (role == ROLE_TARGET) 3020 *bus_width = MIN(tinfo->user.width, *bus_width); 3021 else 3022 *bus_width = MIN(tinfo->goal.width, *bus_width); 3023 } 3024 } 3025 3026 /* 3027 * Update the bitmask of targets for which the controller should 3028 * negotiate with at the next convenient opportunity. This currently 3029 * means the next time we send the initial identify messages for 3030 * a new transaction. 3031 */ 3032 int 3033 ahd_update_neg_request(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3034 struct ahd_tmode_tstate *tstate, 3035 struct ahd_initiator_tinfo *tinfo, ahd_neg_type neg_type) 3036 { 3037 u_int auto_negotiate_orig; 3038 3039 auto_negotiate_orig = tstate->auto_negotiate; 3040 if (neg_type == AHD_NEG_ALWAYS) { 3041 /* 3042 * Force our "current" settings to be 3043 * unknown so that unless a bus reset 3044 * occurs the need to renegotiate is 3045 * recorded persistently. 3046 */ 3047 if ((ahd->features & AHD_WIDE) != 0) 3048 tinfo->curr.width = AHD_WIDTH_UNKNOWN; 3049 tinfo->curr.period = AHD_PERIOD_UNKNOWN; 3050 tinfo->curr.offset = AHD_OFFSET_UNKNOWN; 3051 } 3052 if (tinfo->curr.period != tinfo->goal.period 3053 || tinfo->curr.width != tinfo->goal.width 3054 || tinfo->curr.offset != tinfo->goal.offset 3055 || tinfo->curr.ppr_options != tinfo->goal.ppr_options 3056 || (neg_type == AHD_NEG_IF_NON_ASYNC 3057 && (tinfo->goal.offset != 0 3058 || tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT 3059 || tinfo->goal.ppr_options != 0))) 3060 tstate->auto_negotiate |= devinfo->target_mask; 3061 else 3062 tstate->auto_negotiate &= ~devinfo->target_mask; 3063 3064 return (auto_negotiate_orig != tstate->auto_negotiate); 3065 } 3066 3067 /* 3068 * Update the user/goal/curr tables of synchronous negotiation 3069 * parameters as well as, in the case of a current or active update, 3070 * any data structures on the host controller. In the case of an 3071 * active update, the specified target is currently talking to us on 3072 * the bus, so the transfer parameter update must take effect 3073 * immediately. 3074 */ 3075 void 3076 ahd_set_syncrate(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3077 u_int period, u_int offset, u_int ppr_options, 3078 u_int type, int paused) 3079 { 3080 struct ahd_initiator_tinfo *tinfo; 3081 struct ahd_tmode_tstate *tstate; 3082 u_int old_period; 3083 u_int old_offset; 3084 u_int old_ppr; 3085 int active; 3086 int update_needed; 3087 3088 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE; 3089 update_needed = 0; 3090 3091 if (period == 0 || offset == 0) { 3092 period = 0; 3093 offset = 0; 3094 } 3095 3096 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 3097 devinfo->target, &tstate); 3098 3099 if ((type & AHD_TRANS_USER) != 0) { 3100 tinfo->user.period = period; 3101 tinfo->user.offset = offset; 3102 tinfo->user.ppr_options = ppr_options; 3103 } 3104 3105 if ((type & AHD_TRANS_GOAL) != 0) { 3106 tinfo->goal.period = period; 3107 tinfo->goal.offset = offset; 3108 tinfo->goal.ppr_options = ppr_options; 3109 } 3110 3111 old_period = tinfo->curr.period; 3112 old_offset = tinfo->curr.offset; 3113 old_ppr = tinfo->curr.ppr_options; 3114 3115 if ((type & AHD_TRANS_CUR) != 0 3116 && (old_period != period 3117 || old_offset != offset 3118 || old_ppr != ppr_options)) { 3119 3120 update_needed++; 3121 3122 tinfo->curr.period = period; 3123 tinfo->curr.offset = offset; 3124 tinfo->curr.ppr_options = ppr_options; 3125 3126 ahd_send_async(ahd, devinfo->channel, devinfo->target, 3127 CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL); 3128 if (bootverbose) { 3129 if (offset != 0) { 3130 int options; 3131 3132 printf("%s: target %d synchronous with " 3133 "period = 0x%x, offset = 0x%x", 3134 ahd_name(ahd), devinfo->target, 3135 period, offset); 3136 options = 0; 3137 if ((ppr_options & MSG_EXT_PPR_RD_STRM) != 0) { 3138 printf("(RDSTRM"); 3139 options++; 3140 } 3141 if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0) { 3142 printf("%s", options ? "|DT" : "(DT"); 3143 options++; 3144 } 3145 if ((ppr_options & MSG_EXT_PPR_IU_REQ) != 0) { 3146 printf("%s", options ? "|IU" : "(IU"); 3147 options++; 3148 } 3149 if ((ppr_options & MSG_EXT_PPR_RTI) != 0) { 3150 printf("%s", options ? "|RTI" : "(RTI"); 3151 options++; 3152 } 3153 if ((ppr_options & MSG_EXT_PPR_QAS_REQ) != 0) { 3154 printf("%s", options ? "|QAS" : "(QAS"); 3155 options++; 3156 } 3157 if (options != 0) 3158 printf(")\n"); 3159 else 3160 printf("\n"); 3161 } else { 3162 printf("%s: target %d using " 3163 "asynchronous transfers%s\n", 3164 ahd_name(ahd), devinfo->target, 3165 (ppr_options & MSG_EXT_PPR_QAS_REQ) != 0 3166 ? "(QAS)" : ""); 3167 } 3168 } 3169 } 3170 /* 3171 * Always refresh the neg-table to handle the case of the 3172 * sequencer setting the ENATNO bit for a MK_MESSAGE request. 3173 * We will always renegotiate in that case if this is a 3174 * packetized request. Also manage the busfree expected flag 3175 * from this common routine so that we catch changes due to 3176 * WDTR or SDTR messages. 3177 */ 3178 if ((type & AHD_TRANS_CUR) != 0) { 3179 if (!paused) 3180 ahd_pause(ahd); 3181 ahd_update_neg_table(ahd, devinfo, &tinfo->curr); 3182 if (!paused) 3183 ahd_unpause(ahd); 3184 if (ahd->msg_type != MSG_TYPE_NONE) { 3185 if ((old_ppr & MSG_EXT_PPR_IU_REQ) 3186 != (ppr_options & MSG_EXT_PPR_IU_REQ)) { 3187 #ifdef AHD_DEBUG 3188 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3189 ahd_print_devinfo(ahd, devinfo); 3190 printf("Expecting IU Change busfree\n"); 3191 } 3192 #endif 3193 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE 3194 | MSG_FLAG_IU_REQ_CHANGED; 3195 } 3196 if ((old_ppr & MSG_EXT_PPR_IU_REQ) != 0) { 3197 #ifdef AHD_DEBUG 3198 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3199 printf("PPR with IU_REQ outstanding\n"); 3200 #endif 3201 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE; 3202 } 3203 } 3204 } 3205 3206 update_needed += ahd_update_neg_request(ahd, devinfo, tstate, 3207 tinfo, AHD_NEG_TO_GOAL); 3208 3209 if (update_needed && active) 3210 ahd_update_pending_scbs(ahd); 3211 } 3212 3213 /* 3214 * Update the user/goal/curr tables of wide negotiation 3215 * parameters as well as, in the case of a current or active update, 3216 * any data structures on the host controller. In the case of an 3217 * active update, the specified target is currently talking to us on 3218 * the bus, so the transfer parameter update must take effect 3219 * immediately. 3220 */ 3221 void 3222 ahd_set_width(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3223 u_int width, u_int type, int paused) 3224 { 3225 struct ahd_initiator_tinfo *tinfo; 3226 struct ahd_tmode_tstate *tstate; 3227 u_int oldwidth; 3228 int active; 3229 int update_needed; 3230 3231 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE; 3232 update_needed = 0; 3233 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 3234 devinfo->target, &tstate); 3235 3236 if ((type & AHD_TRANS_USER) != 0) 3237 tinfo->user.width = width; 3238 3239 if ((type & AHD_TRANS_GOAL) != 0) 3240 tinfo->goal.width = width; 3241 3242 oldwidth = tinfo->curr.width; 3243 if ((type & AHD_TRANS_CUR) != 0 && oldwidth != width) { 3244 3245 update_needed++; 3246 3247 tinfo->curr.width = width; 3248 ahd_send_async(ahd, devinfo->channel, devinfo->target, 3249 CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL); 3250 if (bootverbose) { 3251 printf("%s: target %d using %dbit transfers\n", 3252 ahd_name(ahd), devinfo->target, 3253 8 * (0x01 << width)); 3254 } 3255 } 3256 3257 if ((type & AHD_TRANS_CUR) != 0) { 3258 if (!paused) 3259 ahd_pause(ahd); 3260 ahd_update_neg_table(ahd, devinfo, &tinfo->curr); 3261 if (!paused) 3262 ahd_unpause(ahd); 3263 } 3264 3265 update_needed += ahd_update_neg_request(ahd, devinfo, tstate, 3266 tinfo, AHD_NEG_TO_GOAL); 3267 if (update_needed && active) 3268 ahd_update_pending_scbs(ahd); 3269 3270 } 3271 3272 /* 3273 * Update the current state of tagged queuing for a given target. 3274 */ 3275 void 3276 ahd_set_tags(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3277 ahd_queue_alg alg) 3278 { 3279 ahd_platform_set_tags(ahd, devinfo, alg); 3280 ahd_send_async(ahd, devinfo->channel, devinfo->target, 3281 devinfo->lun, AC_TRANSFER_NEG, &alg); 3282 } 3283 3284 static void 3285 ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3286 struct ahd_transinfo *tinfo) 3287 { 3288 ahd_mode_state saved_modes; 3289 u_int period; 3290 u_int ppr_opts; 3291 u_int con_opts; 3292 u_int offset; 3293 u_int saved_negoaddr; 3294 uint8_t iocell_opts[sizeof(ahd->iocell_opts)]; 3295 3296 saved_modes = ahd_save_modes(ahd); 3297 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3298 3299 saved_negoaddr = ahd_inb(ahd, NEGOADDR); 3300 ahd_outb(ahd, NEGOADDR, devinfo->target); 3301 period = tinfo->period; 3302 offset = tinfo->offset; 3303 memcpy(iocell_opts, ahd->iocell_opts, sizeof(ahd->iocell_opts)); 3304 ppr_opts = tinfo->ppr_options & (MSG_EXT_PPR_QAS_REQ|MSG_EXT_PPR_DT_REQ 3305 |MSG_EXT_PPR_IU_REQ|MSG_EXT_PPR_RTI); 3306 con_opts = 0; 3307 if (period == 0) 3308 period = AHD_SYNCRATE_ASYNC; 3309 if (period == AHD_SYNCRATE_160) { 3310 3311 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) { 3312 /* 3313 * When the SPI4 spec was finalized, PACE transfers 3314 * was not made a configurable option in the PPR 3315 * message. Instead it is assumed to be enabled for 3316 * any syncrate faster than 80MHz. Nevertheless, 3317 * Harpoon2A4 allows this to be configurable. 3318 * 3319 * Harpoon2A4 also assumes at most 2 data bytes per 3320 * negotiated REQ/ACK offset. Paced transfers take 3321 * 4, so we must adjust our offset. 3322 */ 3323 ppr_opts |= PPROPT_PACE; 3324 offset *= 2; 3325 3326 /* 3327 * Harpoon2A assumed that there would be a 3328 * fallback rate between 160MHz and 80Mhz, 3329 * so 7 is used as the period factor rather 3330 * than 8 for 160MHz. 3331 */ 3332 period = AHD_SYNCRATE_REVA_160; 3333 } 3334 if ((tinfo->ppr_options & MSG_EXT_PPR_PCOMP_EN) == 0) 3335 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= 3336 ~AHD_PRECOMP_MASK; 3337 } else { 3338 /* 3339 * Precomp should be disabled for non-paced transfers. 3340 */ 3341 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= ~AHD_PRECOMP_MASK; 3342 3343 if ((ahd->features & AHD_NEW_IOCELL_OPTS) != 0 3344 && (ppr_opts & MSG_EXT_PPR_DT_REQ) != 0 3345 && (ppr_opts & MSG_EXT_PPR_IU_REQ) == 0) { 3346 /* 3347 * Slow down our CRC interval to be 3348 * compatible with non-packetized 3349 * U160 devices that can't handle a 3350 * CRC at full speed. 3351 */ 3352 con_opts |= ENSLOWCRC; 3353 } 3354 3355 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) { 3356 /* 3357 * On H2A4, revert to a slower slewrate 3358 * on non-paced transfers. 3359 */ 3360 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= 3361 ~AHD_SLEWRATE_MASK; 3362 } 3363 } 3364 3365 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PRECOMP_SLEW); 3366 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_PRECOMP_SLEW_INDEX]); 3367 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_AMPLITUDE); 3368 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_AMPLITUDE_INDEX]); 3369 3370 ahd_outb(ahd, NEGPERIOD, period); 3371 ahd_outb(ahd, NEGPPROPTS, ppr_opts); 3372 ahd_outb(ahd, NEGOFFSET, offset); 3373 3374 if (tinfo->width == MSG_EXT_WDTR_BUS_16_BIT) 3375 con_opts |= WIDEXFER; 3376 3377 /* 3378 * During packetized transfers, the target will 3379 * give us the opportunity to send command packets 3380 * without us asserting attention. 3381 */ 3382 if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) == 0) 3383 con_opts |= ENAUTOATNO; 3384 ahd_outb(ahd, NEGCONOPTS, con_opts); 3385 ahd_outb(ahd, NEGOADDR, saved_negoaddr); 3386 ahd_restore_modes(ahd, saved_modes); 3387 } 3388 3389 /* 3390 * When the transfer settings for a connection change, setup for 3391 * negotiation in pending SCBs to effect the change as quickly as 3392 * possible. We also cancel any negotiations that are scheduled 3393 * for inflight SCBs that have not been started yet. 3394 */ 3395 static void 3396 ahd_update_pending_scbs(struct ahd_softc *ahd) 3397 { 3398 struct scb *pending_scb; 3399 int pending_scb_count; 3400 int paused; 3401 u_int saved_scbptr; 3402 ahd_mode_state saved_modes; 3403 3404 /* 3405 * Traverse the pending SCB list and ensure that all of the 3406 * SCBs there have the proper settings. We can only safely 3407 * clear the negotiation required flag (setting requires the 3408 * execution queue to be modified) and this is only possible 3409 * if we are not already attempting to select out for this 3410 * SCB. For this reason, all callers only call this routine 3411 * if we are changing the negotiation settings for the currently 3412 * active transaction on the bus. 3413 */ 3414 pending_scb_count = 0; 3415 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) { 3416 struct ahd_devinfo devinfo; 3417 struct ahd_tmode_tstate *tstate; 3418 3419 ahd_scb_devinfo(ahd, &devinfo, pending_scb); 3420 ahd_fetch_transinfo(ahd, devinfo.channel, 3421 devinfo.our_scsiid, 3422 devinfo.target, &tstate); 3423 if ((tstate->auto_negotiate & devinfo.target_mask) == 0 3424 && (pending_scb->flags & SCB_AUTO_NEGOTIATE) != 0) { 3425 pending_scb->flags &= ~SCB_AUTO_NEGOTIATE; 3426 pending_scb->hscb->control &= ~MK_MESSAGE; 3427 } 3428 ahd_sync_scb(ahd, pending_scb, 3429 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 3430 pending_scb_count++; 3431 } 3432 3433 if (pending_scb_count == 0) 3434 return; 3435 3436 if (ahd_is_paused(ahd)) { 3437 paused = 1; 3438 } else { 3439 paused = 0; 3440 ahd_pause(ahd); 3441 } 3442 3443 /* 3444 * Force the sequencer to reinitialize the selection for 3445 * the command at the head of the execution queue if it 3446 * has already been setup. The negotiation changes may 3447 * effect whether we select-out with ATN. It is only 3448 * safe to clear ENSELO when the bus is not free and no 3449 * selection is in progres or completed. 3450 */ 3451 saved_modes = ahd_save_modes(ahd); 3452 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3453 if ((ahd_inb(ahd, SCSISIGI) & BSYI) != 0 3454 && (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) == 0) 3455 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 3456 saved_scbptr = ahd_get_scbptr(ahd); 3457 /* Ensure that the hscbs down on the card match the new information */ 3458 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) { 3459 u_int scb_tag; 3460 u_int control; 3461 3462 scb_tag = SCB_GET_TAG(pending_scb); 3463 ahd_set_scbptr(ahd, scb_tag); 3464 control = ahd_inb_scbram(ahd, SCB_CONTROL); 3465 control &= ~MK_MESSAGE; 3466 control |= pending_scb->hscb->control & MK_MESSAGE; 3467 ahd_outb(ahd, SCB_CONTROL, control); 3468 } 3469 ahd_set_scbptr(ahd, saved_scbptr); 3470 ahd_restore_modes(ahd, saved_modes); 3471 3472 if (paused == 0) 3473 ahd_unpause(ahd); 3474 } 3475 3476 /**************************** Pathing Information *****************************/ 3477 static void 3478 ahd_fetch_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 3479 { 3480 ahd_mode_state saved_modes; 3481 u_int saved_scsiid; 3482 role_t role; 3483 int our_id; 3484 3485 saved_modes = ahd_save_modes(ahd); 3486 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3487 3488 if (ahd_inb(ahd, SSTAT0) & TARGET) 3489 role = ROLE_TARGET; 3490 else 3491 role = ROLE_INITIATOR; 3492 3493 if (role == ROLE_TARGET 3494 && (ahd_inb(ahd, SEQ_FLAGS) & CMDPHASE_PENDING) != 0) { 3495 /* We were selected, so pull our id from TARGIDIN */ 3496 our_id = ahd_inb(ahd, TARGIDIN) & OID; 3497 } else if (role == ROLE_TARGET) 3498 our_id = ahd_inb(ahd, TOWNID); 3499 else 3500 our_id = ahd_inb(ahd, IOWNID); 3501 3502 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID); 3503 ahd_compile_devinfo(devinfo, 3504 our_id, 3505 SCSIID_TARGET(ahd, saved_scsiid), 3506 ahd_inb(ahd, SAVED_LUN), 3507 SCSIID_CHANNEL(ahd, saved_scsiid), 3508 role); 3509 ahd_restore_modes(ahd, saved_modes); 3510 } 3511 3512 void 3513 ahd_print_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 3514 { 3515 printf("%s:%c:%d:%d: ", ahd_name(ahd), 'A', 3516 devinfo->target, devinfo->lun); 3517 } 3518 3519 struct ahd_phase_table_entry* 3520 ahd_lookup_phase_entry(int phase) 3521 { 3522 struct ahd_phase_table_entry *entry; 3523 struct ahd_phase_table_entry *last_entry; 3524 3525 /* 3526 * num_phases doesn't include the default entry which 3527 * will be returned if the phase doesn't match. 3528 */ 3529 last_entry = &ahd_phase_table[num_phases]; 3530 for (entry = ahd_phase_table; entry < last_entry; entry++) { 3531 if (phase == entry->phase) 3532 break; 3533 } 3534 return (entry); 3535 } 3536 3537 void 3538 ahd_compile_devinfo(struct ahd_devinfo *devinfo, u_int our_id, u_int target, 3539 u_int lun, char channel, role_t role) 3540 { 3541 devinfo->our_scsiid = our_id; 3542 devinfo->target = target; 3543 devinfo->lun = lun; 3544 devinfo->target_offset = target; 3545 devinfo->channel = channel; 3546 devinfo->role = role; 3547 if (channel == 'B') 3548 devinfo->target_offset += 8; 3549 devinfo->target_mask = (0x01 << devinfo->target_offset); 3550 } 3551 3552 static void 3553 ahd_scb_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3554 struct scb *scb) 3555 { 3556 role_t role; 3557 int our_id; 3558 3559 our_id = SCSIID_OUR_ID(scb->hscb->scsiid); 3560 role = ROLE_INITIATOR; 3561 if ((scb->hscb->control & TARGET_SCB) != 0) 3562 role = ROLE_TARGET; 3563 ahd_compile_devinfo(devinfo, our_id, SCB_GET_TARGET(ahd, scb), 3564 SCB_GET_LUN(scb), SCB_GET_CHANNEL(ahd, scb), role); 3565 } 3566 3567 3568 /************************ Message Phase Processing ****************************/ 3569 /* 3570 * When an initiator transaction with the MK_MESSAGE flag either reconnects 3571 * or enters the initial message out phase, we are interrupted. Fill our 3572 * outgoing message buffer with the appropriate message and beging handing 3573 * the message phase(s) manually. 3574 */ 3575 static void 3576 ahd_setup_initiator_msgout(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3577 struct scb *scb) 3578 { 3579 /* 3580 * To facilitate adding multiple messages together, 3581 * each routine should increment the index and len 3582 * variables instead of setting them explicitly. 3583 */ 3584 ahd->msgout_index = 0; 3585 ahd->msgout_len = 0; 3586 3587 if (ahd_currently_packetized(ahd)) 3588 ahd->msg_flags |= MSG_FLAG_PACKETIZED; 3589 3590 if (ahd->send_msg_perror 3591 && ahd_inb(ahd, MSG_OUT) == HOST_MSG) { 3592 ahd->msgout_buf[ahd->msgout_index++] = ahd->send_msg_perror; 3593 ahd->msgout_len++; 3594 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3595 #ifdef AHD_DEBUG 3596 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3597 printf("Setting up for Parity Error delivery\n"); 3598 #endif 3599 return; 3600 } else if (scb == NULL) { 3601 printf("%s: WARNING. No pending message for " 3602 "I_T msgin. Issuing NO-OP\n", ahd_name(ahd)); 3603 AHD_CORRECTABLE_ERROR(ahd); 3604 ahd->msgout_buf[ahd->msgout_index++] = MSG_NOOP; 3605 ahd->msgout_len++; 3606 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3607 return; 3608 } 3609 3610 if ((scb->flags & SCB_DEVICE_RESET) == 0 3611 && (scb->flags & SCB_PACKETIZED) == 0 3612 && ahd_inb(ahd, MSG_OUT) == MSG_IDENTIFYFLAG) { 3613 u_int identify_msg; 3614 3615 identify_msg = MSG_IDENTIFYFLAG | SCB_GET_LUN(scb); 3616 if ((scb->hscb->control & DISCENB) != 0) 3617 identify_msg |= MSG_IDENTIFY_DISCFLAG; 3618 ahd->msgout_buf[ahd->msgout_index++] = identify_msg; 3619 ahd->msgout_len++; 3620 3621 if ((scb->hscb->control & TAG_ENB) != 0) { 3622 ahd->msgout_buf[ahd->msgout_index++] = 3623 scb->hscb->control & (TAG_ENB|SCB_TAG_TYPE); 3624 ahd->msgout_buf[ahd->msgout_index++] = SCB_GET_TAG(scb); 3625 ahd->msgout_len += 2; 3626 } 3627 } 3628 3629 if (scb->flags & SCB_DEVICE_RESET) { 3630 ahd->msgout_buf[ahd->msgout_index++] = MSG_BUS_DEV_RESET; 3631 ahd->msgout_len++; 3632 ahd_print_path(ahd, scb); 3633 printf("Bus Device Reset Message Sent\n"); 3634 AHD_CORRECTABLE_ERROR(ahd); 3635 /* 3636 * Clear our selection hardware in advance of 3637 * the busfree. We may have an entry in the waiting 3638 * Q for this target, and we don't want to go about 3639 * selecting while we handle the busfree and blow it 3640 * away. 3641 */ 3642 ahd_outb(ahd, SCSISEQ0, 0); 3643 } else if ((scb->flags & SCB_ABORT) != 0) { 3644 3645 if ((scb->hscb->control & TAG_ENB) != 0) { 3646 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT_TAG; 3647 } else { 3648 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT; 3649 } 3650 ahd->msgout_len++; 3651 ahd_print_path(ahd, scb); 3652 printf("Abort%s Message Sent\n", 3653 (scb->hscb->control & TAG_ENB) != 0 ? " Tag" : ""); 3654 AHD_CORRECTABLE_ERROR(ahd); 3655 /* 3656 * Clear our selection hardware in advance of 3657 * the busfree. We may have an entry in the waiting 3658 * Q for this target, and we don't want to go about 3659 * selecting while we handle the busfree and blow it 3660 * away. 3661 */ 3662 ahd_outb(ahd, SCSISEQ0, 0); 3663 } else if ((scb->flags & (SCB_AUTO_NEGOTIATE|SCB_NEGOTIATE)) != 0) { 3664 ahd_build_transfer_msg(ahd, devinfo); 3665 /* 3666 * Clear our selection hardware in advance of potential 3667 * PPR IU status change busfree. We may have an entry in 3668 * the waiting Q for this target, and we don't want to go 3669 * about selecting while we handle the busfree and blow 3670 * it away. 3671 */ 3672 ahd_outb(ahd, SCSISEQ0, 0); 3673 } else { 3674 printf("ahd_intr: AWAITING_MSG for an SCB that " 3675 "does not have a waiting message\n"); 3676 printf("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid, 3677 devinfo->target_mask); 3678 AHD_FATAL_ERROR(ahd); 3679 panic("SCB = %d, SCB Control = %x:%x, MSG_OUT = %x " 3680 "SCB flags = %x", SCB_GET_TAG(scb), scb->hscb->control, 3681 ahd_inb_scbram(ahd, SCB_CONTROL), ahd_inb(ahd, MSG_OUT), 3682 scb->flags); 3683 } 3684 3685 /* 3686 * Clear the MK_MESSAGE flag from the SCB so we aren't 3687 * asked to send this message again. 3688 */ 3689 ahd_outb(ahd, SCB_CONTROL, 3690 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE); 3691 scb->hscb->control &= ~MK_MESSAGE; 3692 ahd->msgout_index = 0; 3693 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3694 } 3695 3696 /* 3697 * Build an appropriate transfer negotiation message for the 3698 * currently active target. 3699 */ 3700 static void 3701 ahd_build_transfer_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 3702 { 3703 /* 3704 * We need to initiate transfer negotiations. 3705 * If our current and goal settings are identical, 3706 * we want to renegotiate due to a check condition. 3707 */ 3708 struct ahd_initiator_tinfo *tinfo; 3709 struct ahd_tmode_tstate *tstate; 3710 int dowide; 3711 int dosync; 3712 int doppr; 3713 u_int period; 3714 u_int ppr_options; 3715 u_int offset; 3716 3717 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 3718 devinfo->target, &tstate); 3719 /* 3720 * Filter our period based on the current connection. 3721 * If we can't perform DT transfers on this segment (not in LVD 3722 * mode for instance), then our decision to issue a PPR message 3723 * may change. 3724 */ 3725 period = tinfo->goal.period; 3726 offset = tinfo->goal.offset; 3727 ppr_options = tinfo->goal.ppr_options; 3728 /* Target initiated PPR is not allowed in the SCSI spec */ 3729 if (devinfo->role == ROLE_TARGET) 3730 ppr_options = 0; 3731 ahd_devlimited_syncrate(ahd, tinfo, &period, 3732 &ppr_options, devinfo->role); 3733 dowide = tinfo->curr.width != tinfo->goal.width; 3734 dosync = tinfo->curr.offset != offset || tinfo->curr.period != period; 3735 /* 3736 * Only use PPR if we have options that need it, even if the device 3737 * claims to support it. There might be an expander in the way 3738 * that doesn't. 3739 */ 3740 doppr = ppr_options != 0; 3741 3742 if (!dowide && !dosync && !doppr) { 3743 dowide = tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT; 3744 dosync = tinfo->goal.offset != 0; 3745 } 3746 3747 if (!dowide && !dosync && !doppr) { 3748 /* 3749 * Force async with a WDTR message if we have a wide bus, 3750 * or just issue an SDTR with a 0 offset. 3751 */ 3752 if ((ahd->features & AHD_WIDE) != 0) 3753 dowide = 1; 3754 else 3755 dosync = 1; 3756 3757 if (bootverbose) { 3758 ahd_print_devinfo(ahd, devinfo); 3759 printf("Ensuring async\n"); 3760 } 3761 } 3762 /* Target initiated PPR is not allowed in the SCSI spec */ 3763 if (devinfo->role == ROLE_TARGET) 3764 doppr = 0; 3765 3766 /* 3767 * Both the PPR message and SDTR message require the 3768 * goal syncrate to be limited to what the target device 3769 * is capable of handling (based on whether an LVD->SE 3770 * expander is on the bus), so combine these two cases. 3771 * Regardless, guarantee that if we are using WDTR and SDTR 3772 * messages that WDTR comes first. 3773 */ 3774 if (doppr || (dosync && !dowide)) { 3775 3776 offset = tinfo->goal.offset; 3777 ahd_validate_offset(ahd, tinfo, period, &offset, 3778 doppr ? tinfo->goal.width 3779 : tinfo->curr.width, 3780 devinfo->role); 3781 if (doppr) { 3782 ahd_construct_ppr(ahd, devinfo, period, offset, 3783 tinfo->goal.width, ppr_options); 3784 } else { 3785 ahd_construct_sdtr(ahd, devinfo, period, offset); 3786 } 3787 } else { 3788 ahd_construct_wdtr(ahd, devinfo, tinfo->goal.width); 3789 } 3790 } 3791 3792 /* 3793 * Build a synchronous negotiation message in our message 3794 * buffer based on the input parameters. 3795 */ 3796 static void 3797 ahd_construct_sdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3798 u_int period, u_int offset) 3799 { 3800 if (offset == 0) 3801 period = AHD_ASYNC_XFER_PERIOD; 3802 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED; 3803 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_SDTR_LEN; 3804 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_SDTR; 3805 ahd->msgout_buf[ahd->msgout_index++] = period; 3806 ahd->msgout_buf[ahd->msgout_index++] = offset; 3807 ahd->msgout_len += 5; 3808 if (bootverbose) { 3809 printf("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n", 3810 ahd_name(ahd), devinfo->channel, devinfo->target, 3811 devinfo->lun, period, offset); 3812 } 3813 } 3814 3815 /* 3816 * Build a wide negotiateion message in our message 3817 * buffer based on the input parameters. 3818 */ 3819 static void 3820 ahd_construct_wdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3821 u_int bus_width) 3822 { 3823 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED; 3824 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_WDTR_LEN; 3825 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_WDTR; 3826 ahd->msgout_buf[ahd->msgout_index++] = bus_width; 3827 ahd->msgout_len += 4; 3828 if (bootverbose) { 3829 printf("(%s:%c:%d:%d): Sending WDTR %x\n", 3830 ahd_name(ahd), devinfo->channel, devinfo->target, 3831 devinfo->lun, bus_width); 3832 } 3833 } 3834 3835 /* 3836 * Build a parallel protocol request message in our message 3837 * buffer based on the input parameters. 3838 */ 3839 static void 3840 ahd_construct_ppr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3841 u_int period, u_int offset, u_int bus_width, 3842 u_int ppr_options) 3843 { 3844 /* 3845 * Always request precompensation from 3846 * the other target if we are running 3847 * at paced syncrates. 3848 */ 3849 if (period <= AHD_SYNCRATE_PACED) 3850 ppr_options |= MSG_EXT_PPR_PCOMP_EN; 3851 if (offset == 0) 3852 period = AHD_ASYNC_XFER_PERIOD; 3853 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED; 3854 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_PPR_LEN; 3855 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_PPR; 3856 ahd->msgout_buf[ahd->msgout_index++] = period; 3857 ahd->msgout_buf[ahd->msgout_index++] = 0; 3858 ahd->msgout_buf[ahd->msgout_index++] = offset; 3859 ahd->msgout_buf[ahd->msgout_index++] = bus_width; 3860 ahd->msgout_buf[ahd->msgout_index++] = ppr_options; 3861 ahd->msgout_len += 8; 3862 if (bootverbose) { 3863 printf("(%s:%c:%d:%d): Sending PPR bus_width %x, period %x, " 3864 "offset %x, ppr_options %x\n", ahd_name(ahd), 3865 devinfo->channel, devinfo->target, devinfo->lun, 3866 bus_width, period, offset, ppr_options); 3867 } 3868 } 3869 3870 /* 3871 * Clear any active message state. 3872 */ 3873 static void 3874 ahd_clear_msg_state(struct ahd_softc *ahd) 3875 { 3876 ahd_mode_state saved_modes; 3877 3878 saved_modes = ahd_save_modes(ahd); 3879 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3880 ahd->send_msg_perror = 0; 3881 ahd->msg_flags = MSG_FLAG_NONE; 3882 ahd->msgout_len = 0; 3883 ahd->msgin_index = 0; 3884 ahd->msg_type = MSG_TYPE_NONE; 3885 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0) { 3886 /* 3887 * The target didn't care to respond to our 3888 * message request, so clear ATN. 3889 */ 3890 ahd_outb(ahd, CLRSINT1, CLRATNO); 3891 } 3892 ahd_outb(ahd, MSG_OUT, MSG_NOOP); 3893 ahd_outb(ahd, SEQ_FLAGS2, 3894 ahd_inb(ahd, SEQ_FLAGS2) & ~TARGET_MSG_PENDING); 3895 ahd_restore_modes(ahd, saved_modes); 3896 } 3897 3898 /* 3899 * Manual message loop handler. 3900 */ 3901 static void 3902 ahd_handle_message_phase(struct ahd_softc *ahd) 3903 { 3904 struct ahd_devinfo devinfo; 3905 u_int bus_phase; 3906 int end_session; 3907 3908 ahd_fetch_devinfo(ahd, &devinfo); 3909 end_session = FALSE; 3910 bus_phase = ahd_inb(ahd, LASTPHASE); 3911 3912 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0) { 3913 printf("LQIRETRY for LQIPHASE_OUTPKT\n"); 3914 ahd_outb(ahd, LQCTL2, LQIRETRY); 3915 } 3916 reswitch: 3917 switch (ahd->msg_type) { 3918 case MSG_TYPE_INITIATOR_MSGOUT: 3919 { 3920 int lastbyte; 3921 int phasemis; 3922 int msgdone; 3923 3924 if (ahd->msgout_len == 0 && ahd->send_msg_perror == 0) 3925 panic("HOST_MSG_LOOP interrupt with no active message"); 3926 3927 #ifdef AHD_DEBUG 3928 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3929 ahd_print_devinfo(ahd, &devinfo); 3930 printf("INITIATOR_MSG_OUT"); 3931 } 3932 #endif 3933 phasemis = bus_phase != P_MESGOUT; 3934 if (phasemis) { 3935 #ifdef AHD_DEBUG 3936 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3937 printf(" PHASEMIS %s\n", 3938 ahd_lookup_phase_entry(bus_phase) 3939 ->phasemsg); 3940 } 3941 #endif 3942 if (bus_phase == P_MESGIN) { 3943 /* 3944 * Change gears and see if 3945 * this messages is of interest to 3946 * us or should be passed back to 3947 * the sequencer. 3948 */ 3949 ahd_outb(ahd, CLRSINT1, CLRATNO); 3950 ahd->send_msg_perror = 0; 3951 ahd->msg_type = MSG_TYPE_INITIATOR_MSGIN; 3952 ahd->msgin_index = 0; 3953 goto reswitch; 3954 } 3955 end_session = TRUE; 3956 break; 3957 } 3958 3959 if (ahd->send_msg_perror) { 3960 ahd_outb(ahd, CLRSINT1, CLRATNO); 3961 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 3962 #ifdef AHD_DEBUG 3963 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3964 printf(" byte 0x%x\n", ahd->send_msg_perror); 3965 #endif 3966 /* 3967 * If we are notifying the target of a CRC error 3968 * during packetized operations, the target is 3969 * within its rights to acknowledge our message 3970 * with a busfree. 3971 */ 3972 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0 3973 && ahd->send_msg_perror == MSG_INITIATOR_DET_ERR) 3974 ahd->msg_flags |= MSG_FLAG_EXPECT_IDE_BUSFREE; 3975 3976 ahd_outb(ahd, RETURN_2, ahd->send_msg_perror); 3977 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE); 3978 break; 3979 } 3980 3981 msgdone = ahd->msgout_index == ahd->msgout_len; 3982 if (msgdone) { 3983 /* 3984 * The target has requested a retry. 3985 * Re-assert ATN, reset our message index to 3986 * 0, and try again. 3987 */ 3988 ahd->msgout_index = 0; 3989 ahd_assert_atn(ahd); 3990 } 3991 3992 lastbyte = ahd->msgout_index == (ahd->msgout_len - 1); 3993 if (lastbyte) { 3994 /* Last byte is signified by dropping ATN */ 3995 ahd_outb(ahd, CLRSINT1, CLRATNO); 3996 } 3997 3998 /* 3999 * Clear our interrupt status and present 4000 * the next byte on the bus. 4001 */ 4002 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 4003 #ifdef AHD_DEBUG 4004 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 4005 printf(" byte 0x%x\n", 4006 ahd->msgout_buf[ahd->msgout_index]); 4007 #endif 4008 ahd_outb(ahd, RETURN_2, ahd->msgout_buf[ahd->msgout_index++]); 4009 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE); 4010 break; 4011 } 4012 case MSG_TYPE_INITIATOR_MSGIN: 4013 { 4014 int phasemis; 4015 int message_done; 4016 4017 #ifdef AHD_DEBUG 4018 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 4019 ahd_print_devinfo(ahd, &devinfo); 4020 printf("INITIATOR_MSG_IN"); 4021 } 4022 #endif 4023 phasemis = bus_phase != P_MESGIN; 4024 if (phasemis) { 4025 #ifdef AHD_DEBUG 4026 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 4027 printf(" PHASEMIS %s\n", 4028 ahd_lookup_phase_entry(bus_phase) 4029 ->phasemsg); 4030 } 4031 #endif 4032 ahd->msgin_index = 0; 4033 if (bus_phase == P_MESGOUT 4034 && (ahd->send_msg_perror != 0 4035 || (ahd->msgout_len != 0 4036 && ahd->msgout_index == 0))) { 4037 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 4038 goto reswitch; 4039 } 4040 end_session = TRUE; 4041 break; 4042 } 4043 4044 /* Pull the byte in without acking it */ 4045 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIBUS); 4046 #ifdef AHD_DEBUG 4047 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 4048 printf(" byte 0x%x\n", 4049 ahd->msgin_buf[ahd->msgin_index]); 4050 #endif 4051 4052 message_done = ahd_parse_msg(ahd, &devinfo); 4053 4054 if (message_done) { 4055 /* 4056 * Clear our incoming message buffer in case there 4057 * is another message following this one. 4058 */ 4059 ahd->msgin_index = 0; 4060 4061 /* 4062 * If this message illicited a response, 4063 * assert ATN so the target takes us to the 4064 * message out phase. 4065 */ 4066 if (ahd->msgout_len != 0) { 4067 #ifdef AHD_DEBUG 4068 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 4069 ahd_print_devinfo(ahd, &devinfo); 4070 printf("Asserting ATN for response\n"); 4071 } 4072 #endif 4073 ahd_assert_atn(ahd); 4074 } 4075 } else 4076 ahd->msgin_index++; 4077 4078 if (message_done == MSGLOOP_TERMINATED) { 4079 end_session = TRUE; 4080 } else { 4081 /* Ack the byte */ 4082 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 4083 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_READ); 4084 } 4085 break; 4086 } 4087 case MSG_TYPE_TARGET_MSGIN: 4088 { 4089 int msgdone; 4090 int msgout_request; 4091 4092 /* 4093 * By default, the message loop will continue. 4094 */ 4095 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG); 4096 4097 if (ahd->msgout_len == 0) 4098 panic("Target MSGIN with no active message"); 4099 4100 /* 4101 * If we interrupted a mesgout session, the initiator 4102 * will not know this until our first REQ. So, we 4103 * only honor mesgout requests after we've sent our 4104 * first byte. 4105 */ 4106 if ((ahd_inb(ahd, SCSISIGI) & ATNI) != 0 4107 && ahd->msgout_index > 0) 4108 msgout_request = TRUE; 4109 else 4110 msgout_request = FALSE; 4111 4112 if (msgout_request) { 4113 4114 /* 4115 * Change gears and see if 4116 * this messages is of interest to 4117 * us or should be passed back to 4118 * the sequencer. 4119 */ 4120 ahd->msg_type = MSG_TYPE_TARGET_MSGOUT; 4121 ahd_outb(ahd, SCSISIGO, P_MESGOUT | BSYO); 4122 ahd->msgin_index = 0; 4123 /* Dummy read to REQ for first byte */ 4124 ahd_inb(ahd, SCSIDAT); 4125 ahd_outb(ahd, SXFRCTL0, 4126 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4127 break; 4128 } 4129 4130 msgdone = ahd->msgout_index == ahd->msgout_len; 4131 if (msgdone) { 4132 ahd_outb(ahd, SXFRCTL0, 4133 ahd_inb(ahd, SXFRCTL0) & ~SPIOEN); 4134 end_session = TRUE; 4135 break; 4136 } 4137 4138 /* 4139 * Present the next byte on the bus. 4140 */ 4141 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4142 ahd_outb(ahd, SCSIDAT, ahd->msgout_buf[ahd->msgout_index++]); 4143 break; 4144 } 4145 case MSG_TYPE_TARGET_MSGOUT: 4146 { 4147 int lastbyte; 4148 int msgdone; 4149 4150 /* 4151 * By default, the message loop will continue. 4152 */ 4153 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG); 4154 4155 /* 4156 * The initiator signals that this is 4157 * the last byte by dropping ATN. 4158 */ 4159 lastbyte = (ahd_inb(ahd, SCSISIGI) & ATNI) == 0; 4160 4161 /* 4162 * Read the latched byte, but turn off SPIOEN first 4163 * so that we don't inadvertently cause a REQ for the 4164 * next byte. 4165 */ 4166 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) & ~SPIOEN); 4167 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIDAT); 4168 msgdone = ahd_parse_msg(ahd, &devinfo); 4169 if (msgdone == MSGLOOP_TERMINATED) { 4170 /* 4171 * The message is *really* done in that it caused 4172 * us to go to bus free. The sequencer has already 4173 * been reset at this point, so pull the ejection 4174 * handle. 4175 */ 4176 return; 4177 } 4178 4179 ahd->msgin_index++; 4180 4181 /* 4182 * XXX Read spec about initiator dropping ATN too soon 4183 * and use msgdone to detect it. 4184 */ 4185 if (msgdone == MSGLOOP_MSGCOMPLETE) { 4186 ahd->msgin_index = 0; 4187 4188 /* 4189 * If this message illicited a response, transition 4190 * to the Message in phase and send it. 4191 */ 4192 if (ahd->msgout_len != 0) { 4193 ahd_outb(ahd, SCSISIGO, P_MESGIN | BSYO); 4194 ahd_outb(ahd, SXFRCTL0, 4195 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4196 ahd->msg_type = MSG_TYPE_TARGET_MSGIN; 4197 ahd->msgin_index = 0; 4198 break; 4199 } 4200 } 4201 4202 if (lastbyte) 4203 end_session = TRUE; 4204 else { 4205 /* Ask for the next byte. */ 4206 ahd_outb(ahd, SXFRCTL0, 4207 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4208 } 4209 4210 break; 4211 } 4212 default: 4213 panic("Unknown REQINIT message type"); 4214 } 4215 4216 if (end_session) { 4217 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0) { 4218 printf("%s: Returning to Idle Loop\n", 4219 ahd_name(ahd)); 4220 ahd_clear_msg_state(ahd); 4221 4222 /* 4223 * Perform the equivalent of a clear_target_state. 4224 */ 4225 ahd_outb(ahd, LASTPHASE, P_BUSFREE); 4226 ahd_outb(ahd, SEQ_FLAGS, NOT_IDENTIFIED|NO_CDB_SENT); 4227 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET); 4228 } else { 4229 ahd_clear_msg_state(ahd); 4230 ahd_outb(ahd, RETURN_1, EXIT_MSG_LOOP); 4231 } 4232 } 4233 } 4234 4235 /* 4236 * See if we sent a particular extended message to the target. 4237 * If "full" is true, return true only if the target saw the full 4238 * message. If "full" is false, return true if the target saw at 4239 * least the first byte of the message. 4240 */ 4241 static int 4242 ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type, u_int msgval, int full) 4243 { 4244 int found; 4245 u_int index; 4246 4247 found = FALSE; 4248 index = 0; 4249 4250 while (index < ahd->msgout_len) { 4251 if (ahd->msgout_buf[index] == MSG_EXTENDED) { 4252 u_int end_index; 4253 4254 end_index = index + 1 + ahd->msgout_buf[index + 1]; 4255 if (ahd->msgout_buf[index+2] == msgval 4256 && type == AHDMSG_EXT) { 4257 4258 if (full) { 4259 if (ahd->msgout_index > end_index) 4260 found = TRUE; 4261 } else if (ahd->msgout_index > index) 4262 found = TRUE; 4263 } 4264 index = end_index; 4265 } else if (ahd->msgout_buf[index] >= MSG_SIMPLE_TASK 4266 && ahd->msgout_buf[index] <= MSG_IGN_WIDE_RESIDUE) { 4267 4268 /* Skip tag type and tag id or residue param*/ 4269 index += 2; 4270 } else { 4271 /* Single byte message */ 4272 if (type == AHDMSG_1B 4273 && ahd->msgout_index > index 4274 && (ahd->msgout_buf[index] == msgval 4275 || ((ahd->msgout_buf[index] & MSG_IDENTIFYFLAG) != 0 4276 && msgval == MSG_IDENTIFYFLAG))) 4277 found = TRUE; 4278 index++; 4279 } 4280 4281 if (found) 4282 break; 4283 } 4284 return (found); 4285 } 4286 4287 /* 4288 * Wait for a complete incoming message, parse it, and respond accordingly. 4289 */ 4290 static int 4291 ahd_parse_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4292 { 4293 struct ahd_initiator_tinfo *tinfo; 4294 struct ahd_tmode_tstate *tstate; 4295 int reject; 4296 int done; 4297 int response; 4298 4299 done = MSGLOOP_IN_PROG; 4300 response = FALSE; 4301 reject = FALSE; 4302 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 4303 devinfo->target, &tstate); 4304 4305 /* 4306 * Parse as much of the message as is available, 4307 * rejecting it if we don't support it. When 4308 * the entire message is available and has been 4309 * handled, return MSGLOOP_MSGCOMPLETE, indicating 4310 * that we have parsed an entire message. 4311 * 4312 * In the case of extended messages, we accept the length 4313 * byte outright and perform more checking once we know the 4314 * extended message type. 4315 */ 4316 switch (ahd->msgin_buf[0]) { 4317 case MSG_DISCONNECT: 4318 case MSG_SAVEDATAPOINTER: 4319 case MSG_CMDCOMPLETE: 4320 case MSG_RESTOREPOINTERS: 4321 case MSG_IGN_WIDE_RESIDUE: 4322 /* 4323 * End our message loop as these are messages 4324 * the sequencer handles on its own. 4325 */ 4326 done = MSGLOOP_TERMINATED; 4327 break; 4328 case MSG_MESSAGE_REJECT: 4329 response = ahd_handle_msg_reject(ahd, devinfo); 4330 /* FALLTHROUGH */ 4331 case MSG_NOOP: 4332 done = MSGLOOP_MSGCOMPLETE; 4333 break; 4334 case MSG_EXTENDED: 4335 { 4336 /* Wait for enough of the message to begin validation */ 4337 if (ahd->msgin_index < 2) 4338 break; 4339 switch (ahd->msgin_buf[2]) { 4340 case MSG_EXT_SDTR: 4341 { 4342 u_int period; 4343 u_int ppr_options; 4344 u_int offset; 4345 u_int saved_offset; 4346 4347 if (ahd->msgin_buf[1] != MSG_EXT_SDTR_LEN) { 4348 reject = TRUE; 4349 break; 4350 } 4351 4352 /* 4353 * Wait until we have both args before validating 4354 * and acting on this message. 4355 * 4356 * Add one to MSG_EXT_SDTR_LEN to account for 4357 * the extended message preamble. 4358 */ 4359 if (ahd->msgin_index < (MSG_EXT_SDTR_LEN + 1)) 4360 break; 4361 4362 period = ahd->msgin_buf[3]; 4363 ppr_options = 0; 4364 saved_offset = offset = ahd->msgin_buf[4]; 4365 ahd_devlimited_syncrate(ahd, tinfo, &period, 4366 &ppr_options, devinfo->role); 4367 ahd_validate_offset(ahd, tinfo, period, &offset, 4368 tinfo->curr.width, devinfo->role); 4369 if (bootverbose) { 4370 printf("(%s:%c:%d:%d): Received " 4371 "SDTR period %x, offset %x\n\t" 4372 "Filtered to period %x, offset %x\n", 4373 ahd_name(ahd), devinfo->channel, 4374 devinfo->target, devinfo->lun, 4375 ahd->msgin_buf[3], saved_offset, 4376 period, offset); 4377 } 4378 ahd_set_syncrate(ahd, devinfo, period, 4379 offset, ppr_options, 4380 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4381 /*paused*/TRUE); 4382 4383 /* 4384 * See if we initiated Sync Negotiation 4385 * and didn't have to fall down to async 4386 * transfers. 4387 */ 4388 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, TRUE)) { 4389 /* We started it */ 4390 if (saved_offset != offset) { 4391 /* Went too low - force async */ 4392 reject = TRUE; 4393 } 4394 } else { 4395 /* 4396 * Send our own SDTR in reply 4397 */ 4398 if (bootverbose 4399 && devinfo->role == ROLE_INITIATOR) { 4400 printf("(%s:%c:%d:%d): Target " 4401 "Initiated SDTR\n", 4402 ahd_name(ahd), devinfo->channel, 4403 devinfo->target, devinfo->lun); 4404 } 4405 ahd->msgout_index = 0; 4406 ahd->msgout_len = 0; 4407 ahd_construct_sdtr(ahd, devinfo, 4408 period, offset); 4409 ahd->msgout_index = 0; 4410 response = TRUE; 4411 } 4412 done = MSGLOOP_MSGCOMPLETE; 4413 break; 4414 } 4415 case MSG_EXT_WDTR: 4416 { 4417 u_int bus_width; 4418 u_int saved_width; 4419 u_int sending_reply; 4420 4421 sending_reply = FALSE; 4422 if (ahd->msgin_buf[1] != MSG_EXT_WDTR_LEN) { 4423 reject = TRUE; 4424 break; 4425 } 4426 4427 /* 4428 * Wait until we have our arg before validating 4429 * and acting on this message. 4430 * 4431 * Add one to MSG_EXT_WDTR_LEN to account for 4432 * the extended message preamble. 4433 */ 4434 if (ahd->msgin_index < (MSG_EXT_WDTR_LEN + 1)) 4435 break; 4436 4437 bus_width = ahd->msgin_buf[3]; 4438 saved_width = bus_width; 4439 ahd_validate_width(ahd, tinfo, &bus_width, 4440 devinfo->role); 4441 if (bootverbose) { 4442 printf("(%s:%c:%d:%d): Received WDTR " 4443 "%x filtered to %x\n", 4444 ahd_name(ahd), devinfo->channel, 4445 devinfo->target, devinfo->lun, 4446 saved_width, bus_width); 4447 } 4448 4449 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, TRUE)) { 4450 /* 4451 * Don't send a WDTR back to the 4452 * target, since we asked first. 4453 * If the width went higher than our 4454 * request, reject it. 4455 */ 4456 if (saved_width > bus_width) { 4457 reject = TRUE; 4458 printf("(%s:%c:%d:%d): requested %dBit " 4459 "transfers. Rejecting...\n", 4460 ahd_name(ahd), devinfo->channel, 4461 devinfo->target, devinfo->lun, 4462 8 * (0x01 << bus_width)); 4463 bus_width = 0; 4464 } 4465 } else { 4466 /* 4467 * Send our own WDTR in reply 4468 */ 4469 if (bootverbose 4470 && devinfo->role == ROLE_INITIATOR) { 4471 printf("(%s:%c:%d:%d): Target " 4472 "Initiated WDTR\n", 4473 ahd_name(ahd), devinfo->channel, 4474 devinfo->target, devinfo->lun); 4475 } 4476 ahd->msgout_index = 0; 4477 ahd->msgout_len = 0; 4478 ahd_construct_wdtr(ahd, devinfo, bus_width); 4479 ahd->msgout_index = 0; 4480 response = TRUE; 4481 sending_reply = TRUE; 4482 } 4483 /* 4484 * After a wide message, we are async, but 4485 * some devices don't seem to honor this portion 4486 * of the spec. Force a renegotiation of the 4487 * sync component of our transfer agreement even 4488 * if our goal is async. By updating our width 4489 * after forcing the negotiation, we avoid 4490 * renegotiating for width. 4491 */ 4492 ahd_update_neg_request(ahd, devinfo, tstate, 4493 tinfo, AHD_NEG_ALWAYS); 4494 ahd_set_width(ahd, devinfo, bus_width, 4495 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4496 /*paused*/TRUE); 4497 if (sending_reply == FALSE && reject == FALSE) { 4498 4499 /* 4500 * We will always have an SDTR to send. 4501 */ 4502 ahd->msgout_index = 0; 4503 ahd->msgout_len = 0; 4504 ahd_build_transfer_msg(ahd, devinfo); 4505 ahd->msgout_index = 0; 4506 response = TRUE; 4507 } 4508 done = MSGLOOP_MSGCOMPLETE; 4509 break; 4510 } 4511 case MSG_EXT_PPR: 4512 { 4513 u_int period; 4514 u_int offset; 4515 u_int bus_width; 4516 u_int ppr_options; 4517 u_int saved_width; 4518 u_int saved_offset; 4519 u_int saved_ppr_options; 4520 4521 if (ahd->msgin_buf[1] != MSG_EXT_PPR_LEN) { 4522 reject = TRUE; 4523 break; 4524 } 4525 4526 /* 4527 * Wait until we have all args before validating 4528 * and acting on this message. 4529 * 4530 * Add one to MSG_EXT_PPR_LEN to account for 4531 * the extended message preamble. 4532 */ 4533 if (ahd->msgin_index < (MSG_EXT_PPR_LEN + 1)) 4534 break; 4535 4536 period = ahd->msgin_buf[3]; 4537 offset = ahd->msgin_buf[5]; 4538 bus_width = ahd->msgin_buf[6]; 4539 saved_width = bus_width; 4540 ppr_options = ahd->msgin_buf[7]; 4541 /* 4542 * According to the spec, a DT only 4543 * period factor with no DT option 4544 * set implies async. 4545 */ 4546 if ((ppr_options & MSG_EXT_PPR_DT_REQ) == 0 4547 && period <= 9) 4548 offset = 0; 4549 saved_ppr_options = ppr_options; 4550 saved_offset = offset; 4551 4552 /* 4553 * Transfer options are only available if we 4554 * are negotiating wide. 4555 */ 4556 if (bus_width == 0) 4557 ppr_options &= MSG_EXT_PPR_QAS_REQ; 4558 4559 ahd_validate_width(ahd, tinfo, &bus_width, 4560 devinfo->role); 4561 ahd_devlimited_syncrate(ahd, tinfo, &period, 4562 &ppr_options, devinfo->role); 4563 ahd_validate_offset(ahd, tinfo, period, &offset, 4564 bus_width, devinfo->role); 4565 4566 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, TRUE)) { 4567 /* 4568 * If we are unable to do any of the 4569 * requested options (we went too low), 4570 * then we'll have to reject the message. 4571 */ 4572 if (saved_width > bus_width 4573 || saved_offset != offset 4574 || saved_ppr_options != ppr_options) { 4575 reject = TRUE; 4576 period = 0; 4577 offset = 0; 4578 bus_width = 0; 4579 ppr_options = 0; 4580 } 4581 } else { 4582 if (devinfo->role != ROLE_TARGET) 4583 printf("(%s:%c:%d:%d): Target " 4584 "Initiated PPR\n", 4585 ahd_name(ahd), devinfo->channel, 4586 devinfo->target, devinfo->lun); 4587 else 4588 printf("(%s:%c:%d:%d): Initiator " 4589 "Initiated PPR\n", 4590 ahd_name(ahd), devinfo->channel, 4591 devinfo->target, devinfo->lun); 4592 ahd->msgout_index = 0; 4593 ahd->msgout_len = 0; 4594 ahd_construct_ppr(ahd, devinfo, period, offset, 4595 bus_width, ppr_options); 4596 ahd->msgout_index = 0; 4597 response = TRUE; 4598 } 4599 if (bootverbose) { 4600 printf("(%s:%c:%d:%d): Received PPR width %x, " 4601 "period %x, offset %x,options %x\n" 4602 "\tFiltered to width %x, period %x, " 4603 "offset %x, options %x\n", 4604 ahd_name(ahd), devinfo->channel, 4605 devinfo->target, devinfo->lun, 4606 saved_width, ahd->msgin_buf[3], 4607 saved_offset, saved_ppr_options, 4608 bus_width, period, offset, ppr_options); 4609 } 4610 ahd_set_width(ahd, devinfo, bus_width, 4611 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4612 /*paused*/TRUE); 4613 ahd_set_syncrate(ahd, devinfo, period, 4614 offset, ppr_options, 4615 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4616 /*paused*/TRUE); 4617 4618 done = MSGLOOP_MSGCOMPLETE; 4619 break; 4620 } 4621 default: 4622 /* Unknown extended message. Reject it. */ 4623 reject = TRUE; 4624 break; 4625 } 4626 break; 4627 } 4628 #ifdef AHD_TARGET_MODE 4629 case MSG_BUS_DEV_RESET: 4630 ahd_handle_devreset(ahd, devinfo, CAM_LUN_WILDCARD, 4631 CAM_BDR_SENT, 4632 "Bus Device Reset Received", 4633 /*verbose_level*/0); 4634 ahd_restart(ahd); 4635 done = MSGLOOP_TERMINATED; 4636 break; 4637 case MSG_ABORT_TAG: 4638 case MSG_ABORT: 4639 case MSG_CLEAR_QUEUE: 4640 { 4641 int tag; 4642 4643 /* Target mode messages */ 4644 if (devinfo->role != ROLE_TARGET) { 4645 reject = TRUE; 4646 break; 4647 } 4648 tag = SCB_LIST_NULL; 4649 if (ahd->msgin_buf[0] == MSG_ABORT_TAG) 4650 tag = ahd_inb(ahd, INITIATOR_TAG); 4651 ahd_abort_scbs(ahd, devinfo->target, devinfo->channel, 4652 devinfo->lun, tag, ROLE_TARGET, 4653 CAM_REQ_ABORTED); 4654 4655 tstate = ahd->enabled_targets[devinfo->our_scsiid]; 4656 if (tstate != NULL) { 4657 struct ahd_tmode_lstate* lstate; 4658 4659 lstate = tstate->enabled_luns[devinfo->lun]; 4660 if (lstate != NULL) { 4661 ahd_queue_lstate_event(ahd, lstate, 4662 devinfo->our_scsiid, 4663 ahd->msgin_buf[0], 4664 /*arg*/tag); 4665 ahd_send_lstate_events(ahd, lstate); 4666 } 4667 } 4668 ahd_restart(ahd); 4669 done = MSGLOOP_TERMINATED; 4670 break; 4671 } 4672 #endif 4673 case MSG_QAS_REQUEST: 4674 #ifdef AHD_DEBUG 4675 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 4676 printf("%s: QAS request. SCSISIGI == 0x%x\n", 4677 ahd_name(ahd), ahd_inb(ahd, SCSISIGI)); 4678 #endif 4679 ahd->msg_flags |= MSG_FLAG_EXPECT_QASREJ_BUSFREE; 4680 /* FALLTHROUGH */ 4681 case MSG_TERM_IO_PROC: 4682 default: 4683 reject = TRUE; 4684 break; 4685 } 4686 4687 if (reject) { 4688 /* 4689 * Setup to reject the message. 4690 */ 4691 ahd->msgout_index = 0; 4692 ahd->msgout_len = 1; 4693 ahd->msgout_buf[0] = MSG_MESSAGE_REJECT; 4694 done = MSGLOOP_MSGCOMPLETE; 4695 response = TRUE; 4696 } 4697 4698 if (done != MSGLOOP_IN_PROG && !response) 4699 /* Clear the outgoing message buffer */ 4700 ahd->msgout_len = 0; 4701 4702 return (done); 4703 } 4704 4705 /* 4706 * Process a message reject message. 4707 */ 4708 static int 4709 ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4710 { 4711 /* 4712 * What we care about here is if we had an 4713 * outstanding SDTR or WDTR message for this 4714 * target. If we did, this is a signal that 4715 * the target is refusing negotiation. 4716 */ 4717 struct scb *scb; 4718 struct ahd_initiator_tinfo *tinfo; 4719 struct ahd_tmode_tstate *tstate; 4720 u_int scb_index; 4721 u_int last_msg; 4722 int response = 0; 4723 4724 scb_index = ahd_get_scbptr(ahd); 4725 scb = ahd_lookup_scb(ahd, scb_index); 4726 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, 4727 devinfo->our_scsiid, 4728 devinfo->target, &tstate); 4729 /* Might be necessary */ 4730 last_msg = ahd_inb(ahd, LAST_MSG); 4731 4732 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/FALSE)) { 4733 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/TRUE) 4734 && tinfo->goal.period <= AHD_SYNCRATE_PACED) { 4735 /* 4736 * Target may not like our SPI-4 PPR Options. 4737 * Attempt to negotiate 80MHz which will turn 4738 * off these options. 4739 */ 4740 if (bootverbose) { 4741 printf("(%s:%c:%d:%d): PPR Rejected. " 4742 "Trying simple U160 PPR\n", 4743 ahd_name(ahd), devinfo->channel, 4744 devinfo->target, devinfo->lun); 4745 } 4746 tinfo->goal.period = AHD_SYNCRATE_DT; 4747 tinfo->goal.ppr_options &= MSG_EXT_PPR_IU_REQ 4748 | MSG_EXT_PPR_QAS_REQ 4749 | MSG_EXT_PPR_DT_REQ; 4750 } else { 4751 /* 4752 * Target does not support the PPR message. 4753 * Attempt to negotiate SPI-2 style. 4754 */ 4755 if (bootverbose) { 4756 printf("(%s:%c:%d:%d): PPR Rejected. " 4757 "Trying WDTR/SDTR\n", 4758 ahd_name(ahd), devinfo->channel, 4759 devinfo->target, devinfo->lun); 4760 } 4761 tinfo->goal.ppr_options = 0; 4762 tinfo->curr.transport_version = 2; 4763 tinfo->goal.transport_version = 2; 4764 } 4765 ahd->msgout_index = 0; 4766 ahd->msgout_len = 0; 4767 ahd_build_transfer_msg(ahd, devinfo); 4768 ahd->msgout_index = 0; 4769 response = 1; 4770 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, /*full*/FALSE)) { 4771 4772 /* note 8bit xfers */ 4773 printf("(%s:%c:%d:%d): refuses WIDE negotiation. Using " 4774 "8bit transfers\n", ahd_name(ahd), 4775 devinfo->channel, devinfo->target, devinfo->lun); 4776 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT, 4777 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4778 /*paused*/TRUE); 4779 /* 4780 * No need to clear the sync rate. If the target 4781 * did not accept the command, our syncrate is 4782 * unaffected. If the target started the negotiation, 4783 * but rejected our response, we already cleared the 4784 * sync rate before sending our WDTR. 4785 */ 4786 if (tinfo->goal.offset != tinfo->curr.offset) { 4787 4788 /* Start the sync negotiation */ 4789 ahd->msgout_index = 0; 4790 ahd->msgout_len = 0; 4791 ahd_build_transfer_msg(ahd, devinfo); 4792 ahd->msgout_index = 0; 4793 response = 1; 4794 } 4795 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, /*full*/FALSE)) { 4796 /* note asynch xfers and clear flag */ 4797 ahd_set_syncrate(ahd, devinfo, /*period*/0, 4798 /*offset*/0, /*ppr_options*/0, 4799 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4800 /*paused*/TRUE); 4801 printf("(%s:%c:%d:%d): refuses synchronous negotiation. " 4802 "Using asynchronous transfers\n", 4803 ahd_name(ahd), devinfo->channel, 4804 devinfo->target, devinfo->lun); 4805 } else if ((scb->hscb->control & MSG_SIMPLE_TASK) != 0) { 4806 int tag_type; 4807 int mask; 4808 4809 tag_type = (scb->hscb->control & MSG_SIMPLE_TASK); 4810 4811 if (tag_type == MSG_SIMPLE_TASK) { 4812 printf("(%s:%c:%d:%d): refuses tagged commands. " 4813 "Performing non-tagged I/O\n", ahd_name(ahd), 4814 devinfo->channel, devinfo->target, devinfo->lun); 4815 ahd_set_tags(ahd, devinfo, AHD_QUEUE_NONE); 4816 mask = ~0x23; 4817 } else { 4818 printf("(%s:%c:%d:%d): refuses %s tagged commands. " 4819 "Performing simple queue tagged I/O only\n", 4820 ahd_name(ahd), devinfo->channel, devinfo->target, 4821 devinfo->lun, tag_type == MSG_ORDERED_TASK 4822 ? "ordered" : "head of queue"); 4823 ahd_set_tags(ahd, devinfo, AHD_QUEUE_BASIC); 4824 mask = ~0x03; 4825 } 4826 4827 /* 4828 * Resend the identify for this CCB as the target 4829 * may believe that the selection is invalid otherwise. 4830 */ 4831 ahd_outb(ahd, SCB_CONTROL, 4832 ahd_inb_scbram(ahd, SCB_CONTROL) & mask); 4833 scb->hscb->control &= mask; 4834 aic_set_transaction_tag(scb, /*enabled*/FALSE, 4835 /*type*/MSG_SIMPLE_TASK); 4836 ahd_outb(ahd, MSG_OUT, MSG_IDENTIFYFLAG); 4837 ahd_assert_atn(ahd); 4838 ahd_busy_tcl(ahd, BUILD_TCL(scb->hscb->scsiid, devinfo->lun), 4839 SCB_GET_TAG(scb)); 4840 4841 /* 4842 * Requeue all tagged commands for this target 4843 * currently in our possession so they can be 4844 * converted to untagged commands. 4845 */ 4846 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 4847 SCB_GET_CHANNEL(ahd, scb), 4848 SCB_GET_LUN(scb), /*tag*/SCB_LIST_NULL, 4849 ROLE_INITIATOR, CAM_REQUEUE_REQ, 4850 SEARCH_COMPLETE); 4851 } else if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_IDENTIFYFLAG, TRUE)) { 4852 /* 4853 * Most likely the device believes that we had 4854 * previously negotiated packetized. 4855 */ 4856 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE 4857 | MSG_FLAG_IU_REQ_CHANGED; 4858 4859 ahd_force_renegotiation(ahd, devinfo); 4860 ahd->msgout_index = 0; 4861 ahd->msgout_len = 0; 4862 ahd_build_transfer_msg(ahd, devinfo); 4863 ahd->msgout_index = 0; 4864 response = 1; 4865 } else { 4866 /* 4867 * Otherwise, we ignore it. 4868 */ 4869 printf("%s:%c:%d: Message reject for %x -- ignored\n", 4870 ahd_name(ahd), devinfo->channel, devinfo->target, 4871 last_msg); 4872 } 4873 return (response); 4874 } 4875 4876 /* 4877 * Process an ingnore wide residue message. 4878 */ 4879 static void 4880 ahd_handle_ign_wide_residue(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4881 { 4882 u_int scb_index; 4883 struct scb *scb; 4884 4885 scb_index = ahd_get_scbptr(ahd); 4886 scb = ahd_lookup_scb(ahd, scb_index); 4887 /* 4888 * XXX Actually check data direction in the sequencer? 4889 * Perhaps add datadir to some spare bits in the hscb? 4890 */ 4891 if ((ahd_inb(ahd, SEQ_FLAGS) & DPHASE) == 0 4892 || aic_get_transfer_dir(scb) != CAM_DIR_IN) { 4893 /* 4894 * Ignore the message if we haven't 4895 * seen an appropriate data phase yet. 4896 */ 4897 } else { 4898 /* 4899 * If the residual occurred on the last 4900 * transfer and the transfer request was 4901 * expected to end on an odd count, do 4902 * nothing. Otherwise, subtract a byte 4903 * and update the residual count accordingly. 4904 */ 4905 uint32_t sgptr; 4906 4907 sgptr = ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR); 4908 if ((sgptr & SG_LIST_NULL) != 0 4909 && (ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE) 4910 & SCB_XFERLEN_ODD) != 0) { 4911 /* 4912 * If the residual occurred on the last 4913 * transfer and the transfer request was 4914 * expected to end on an odd count, do 4915 * nothing. 4916 */ 4917 } else { 4918 uint32_t data_cnt; 4919 uint64_t data_addr; 4920 uint32_t sglen; 4921 4922 /* Pull in the rest of the sgptr */ 4923 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 4924 data_cnt = ahd_inl_scbram(ahd, SCB_RESIDUAL_DATACNT); 4925 if ((sgptr & SG_LIST_NULL) != 0) { 4926 /* 4927 * The residual data count is not updated 4928 * for the command run to completion case. 4929 * Explicitly zero the count. 4930 */ 4931 data_cnt &= ~AHD_SG_LEN_MASK; 4932 } 4933 data_addr = ahd_inq(ahd, SHADDR); 4934 data_cnt += 1; 4935 data_addr -= 1; 4936 sgptr &= SG_PTR_MASK; 4937 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 4938 struct ahd_dma64_seg *sg; 4939 4940 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 4941 4942 /* 4943 * The residual sg ptr points to the next S/G 4944 * to load so we must go back one. 4945 */ 4946 sg--; 4947 sglen = aic_le32toh(sg->len) & AHD_SG_LEN_MASK; 4948 if (sg != scb->sg_list 4949 && sglen < (data_cnt & AHD_SG_LEN_MASK)) { 4950 4951 sg--; 4952 sglen = aic_le32toh(sg->len); 4953 /* 4954 * Preserve High Address and SG_LIST 4955 * bits while setting the count to 1. 4956 */ 4957 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK)); 4958 data_addr = aic_le64toh(sg->addr) 4959 + (sglen & AHD_SG_LEN_MASK) 4960 - 1; 4961 4962 /* 4963 * Increment sg so it points to the 4964 * "next" sg. 4965 */ 4966 sg++; 4967 sgptr = ahd_sg_virt_to_bus(ahd, scb, 4968 sg); 4969 } 4970 } else { 4971 struct ahd_dma_seg *sg; 4972 4973 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 4974 4975 /* 4976 * The residual sg ptr points to the next S/G 4977 * to load so we must go back one. 4978 */ 4979 sg--; 4980 sglen = aic_le32toh(sg->len) & AHD_SG_LEN_MASK; 4981 if (sg != scb->sg_list 4982 && sglen < (data_cnt & AHD_SG_LEN_MASK)) { 4983 4984 sg--; 4985 sglen = aic_le32toh(sg->len); 4986 /* 4987 * Preserve High Address and SG_LIST 4988 * bits while setting the count to 1. 4989 */ 4990 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK)); 4991 data_addr = aic_le32toh(sg->addr) 4992 + (sglen & AHD_SG_LEN_MASK) 4993 - 1; 4994 4995 /* 4996 * Increment sg so it points to the 4997 * "next" sg. 4998 */ 4999 sg++; 5000 sgptr = ahd_sg_virt_to_bus(ahd, scb, 5001 sg); 5002 } 5003 } 5004 /* 5005 * Toggle the "oddness" of the transfer length 5006 * to handle this mid-transfer ignore wide 5007 * residue. This ensures that the oddness is 5008 * correct for subsequent data transfers. 5009 */ 5010 ahd_outb(ahd, SCB_TASK_ATTRIBUTE, 5011 ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE) 5012 ^ SCB_XFERLEN_ODD); 5013 5014 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 5015 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, data_cnt); 5016 /* 5017 * The FIFO's pointers will be updated if/when the 5018 * sequencer re-enters a data phase. 5019 */ 5020 } 5021 } 5022 } 5023 5024 5025 /* 5026 * Reinitialize the data pointers for the active transfer 5027 * based on its current residual. 5028 */ 5029 static void 5030 ahd_reinitialize_dataptrs(struct ahd_softc *ahd) 5031 { 5032 struct scb *scb; 5033 ahd_mode_state saved_modes; 5034 u_int scb_index; 5035 u_int wait; 5036 uint32_t sgptr; 5037 uint32_t resid; 5038 uint64_t dataptr; 5039 5040 AHD_ASSERT_MODES(ahd, AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK, 5041 AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK); 5042 5043 scb_index = ahd_get_scbptr(ahd); 5044 scb = ahd_lookup_scb(ahd, scb_index); 5045 5046 /* 5047 * Release and reacquire the FIFO so we 5048 * have a clean slate. 5049 */ 5050 ahd_outb(ahd, DFFSXFRCTL, CLRCHN); 5051 wait = 1000; 5052 while (--wait && !(ahd_inb(ahd, MDFFSTAT) & FIFOFREE)) 5053 aic_delay(100); 5054 if (wait == 0) { 5055 ahd_print_path(ahd, scb); 5056 printf("ahd_reinitialize_dataptrs: Forcing FIFO free.\n"); 5057 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT); 5058 } 5059 saved_modes = ahd_save_modes(ahd); 5060 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5061 ahd_outb(ahd, DFFSTAT, 5062 ahd_inb(ahd, DFFSTAT) 5063 | (saved_modes == 0x11 ? CURRFIFO_1 : CURRFIFO_0)); 5064 5065 /* 5066 * Determine initial values for data_addr and data_cnt 5067 * for resuming the data phase. 5068 */ 5069 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 5070 sgptr &= SG_PTR_MASK; 5071 5072 resid = (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 2) << 16) 5073 | (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 1) << 8) 5074 | ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT); 5075 5076 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 5077 struct ahd_dma64_seg *sg; 5078 5079 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 5080 5081 /* The residual sg_ptr always points to the next sg */ 5082 sg--; 5083 5084 dataptr = aic_le64toh(sg->addr) 5085 + (aic_le32toh(sg->len) & AHD_SG_LEN_MASK) 5086 - resid; 5087 ahd_outl(ahd, HADDR + 4, dataptr >> 32); 5088 } else { 5089 struct ahd_dma_seg *sg; 5090 5091 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 5092 5093 /* The residual sg_ptr always points to the next sg */ 5094 sg--; 5095 5096 dataptr = aic_le32toh(sg->addr) 5097 + (aic_le32toh(sg->len) & AHD_SG_LEN_MASK) 5098 - resid; 5099 ahd_outb(ahd, HADDR + 4, 5100 (aic_le32toh(sg->len) & ~AHD_SG_LEN_MASK) >> 24); 5101 } 5102 ahd_outl(ahd, HADDR, dataptr); 5103 ahd_outb(ahd, HCNT + 2, resid >> 16); 5104 ahd_outb(ahd, HCNT + 1, resid >> 8); 5105 ahd_outb(ahd, HCNT, resid); 5106 } 5107 5108 /* 5109 * Handle the effects of issuing a bus device reset message. 5110 */ 5111 static void 5112 ahd_handle_devreset(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 5113 u_int lun, cam_status status, char *message, 5114 int verbose_level) 5115 { 5116 #ifdef AHD_TARGET_MODE 5117 struct ahd_tmode_tstate* tstate; 5118 #endif 5119 int found; 5120 5121 found = ahd_abort_scbs(ahd, devinfo->target, devinfo->channel, 5122 lun, SCB_LIST_NULL, devinfo->role, 5123 status); 5124 5125 #ifdef AHD_TARGET_MODE 5126 /* 5127 * Send an immediate notify ccb to all target mord peripheral 5128 * drivers affected by this action. 5129 */ 5130 tstate = ahd->enabled_targets[devinfo->our_scsiid]; 5131 if (tstate != NULL) { 5132 u_int cur_lun; 5133 u_int max_lun; 5134 5135 if (lun != CAM_LUN_WILDCARD) { 5136 cur_lun = 0; 5137 max_lun = AHD_NUM_LUNS - 1; 5138 } else { 5139 cur_lun = lun; 5140 max_lun = lun; 5141 } 5142 for (cur_lun <= max_lun; cur_lun++) { 5143 struct ahd_tmode_lstate* lstate; 5144 5145 lstate = tstate->enabled_luns[cur_lun]; 5146 if (lstate == NULL) 5147 continue; 5148 5149 ahd_queue_lstate_event(ahd, lstate, devinfo->our_scsiid, 5150 MSG_BUS_DEV_RESET, /*arg*/0); 5151 ahd_send_lstate_events(ahd, lstate); 5152 } 5153 } 5154 #endif 5155 5156 /* 5157 * Go back to async/narrow transfers and renegotiate. 5158 */ 5159 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT, 5160 AHD_TRANS_CUR, /*paused*/TRUE); 5161 ahd_set_syncrate(ahd, devinfo, /*period*/0, /*offset*/0, 5162 /*ppr_options*/0, AHD_TRANS_CUR, 5163 /*paused*/TRUE); 5164 5165 if (status != CAM_SEL_TIMEOUT) 5166 ahd_send_async(ahd, devinfo->channel, devinfo->target, 5167 lun, AC_SENT_BDR, NULL); 5168 5169 if (message != NULL 5170 && (verbose_level <= bootverbose)) { 5171 AHD_CORRECTABLE_ERROR(ahd); 5172 printf("%s: %s on %c:%d. %d SCBs aborted\n", ahd_name(ahd), 5173 message, devinfo->channel, devinfo->target, found); 5174 } 5175 } 5176 5177 #ifdef AHD_TARGET_MODE 5178 static void 5179 ahd_setup_target_msgin(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 5180 struct scb *scb) 5181 { 5182 5183 /* 5184 * To facilitate adding multiple messages together, 5185 * each routine should increment the index and len 5186 * variables instead of setting them explicitly. 5187 */ 5188 ahd->msgout_index = 0; 5189 ahd->msgout_len = 0; 5190 5191 if (scb != NULL && (scb->flags & SCB_AUTO_NEGOTIATE) != 0) 5192 ahd_build_transfer_msg(ahd, devinfo); 5193 else 5194 panic("ahd_intr: AWAITING target message with no message"); 5195 5196 ahd->msgout_index = 0; 5197 ahd->msg_type = MSG_TYPE_TARGET_MSGIN; 5198 } 5199 #endif 5200 /**************************** Initialization **********************************/ 5201 static u_int 5202 ahd_sglist_size(struct ahd_softc *ahd) 5203 { 5204 bus_size_t list_size; 5205 5206 list_size = sizeof(struct ahd_dma_seg) * AHD_NSEG; 5207 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 5208 list_size = sizeof(struct ahd_dma64_seg) * AHD_NSEG; 5209 return (list_size); 5210 } 5211 5212 /* 5213 * Calculate the optimum S/G List allocation size. S/G elements used 5214 * for a given transaction must be physically contiguous. Assume the 5215 * OS will allocate full pages to us, so it doesn't make sense to request 5216 * less than a page. 5217 */ 5218 static u_int 5219 ahd_sglist_allocsize(struct ahd_softc *ahd) 5220 { 5221 bus_size_t sg_list_increment; 5222 bus_size_t sg_list_size; 5223 bus_size_t max_list_size; 5224 bus_size_t best_list_size; 5225 5226 /* Start out with the minimum required for AHD_NSEG. */ 5227 sg_list_increment = ahd_sglist_size(ahd); 5228 sg_list_size = sg_list_increment; 5229 5230 /* Get us as close as possible to a page in size. */ 5231 while ((sg_list_size + sg_list_increment) <= PAGE_SIZE) 5232 sg_list_size += sg_list_increment; 5233 5234 /* 5235 * Try to reduce the amount of wastage by allocating 5236 * multiple pages. 5237 */ 5238 best_list_size = sg_list_size; 5239 max_list_size = roundup(sg_list_increment, PAGE_SIZE); 5240 if (max_list_size < 4 * PAGE_SIZE) 5241 max_list_size = 4 * PAGE_SIZE; 5242 if (max_list_size > (AHD_SCB_MAX_ALLOC * sg_list_increment)) 5243 max_list_size = (AHD_SCB_MAX_ALLOC * sg_list_increment); 5244 while ((sg_list_size + sg_list_increment) <= max_list_size 5245 && (sg_list_size % PAGE_SIZE) != 0) { 5246 bus_size_t new_mod; 5247 bus_size_t best_mod; 5248 5249 sg_list_size += sg_list_increment; 5250 new_mod = sg_list_size % PAGE_SIZE; 5251 best_mod = best_list_size % PAGE_SIZE; 5252 if (new_mod > best_mod || new_mod == 0) { 5253 best_list_size = sg_list_size; 5254 } 5255 } 5256 return (best_list_size); 5257 } 5258 5259 /* 5260 * Allocate a controller structure for a new device 5261 * and perform initial initializion. 5262 */ 5263 struct ahd_softc * 5264 ahd_alloc(void *platform_arg, char *name) 5265 { 5266 struct ahd_softc *ahd; 5267 5268 #ifndef __FreeBSD__ 5269 ahd = malloc(sizeof(*ahd), M_DEVBUF, M_NOWAIT); 5270 if (!ahd) { 5271 printf("aic7xxx: cannot malloc softc!\n"); 5272 free(name, M_DEVBUF); 5273 return NULL; 5274 } 5275 #else 5276 ahd = device_get_softc((device_t)platform_arg); 5277 #endif 5278 memset(ahd, 0, sizeof(*ahd)); 5279 ahd->seep_config = malloc(sizeof(*ahd->seep_config), 5280 M_DEVBUF, M_NOWAIT); 5281 if (ahd->seep_config == NULL) { 5282 #ifndef __FreeBSD__ 5283 free(ahd, M_DEVBUF); 5284 #endif 5285 free(name, M_DEVBUF); 5286 return (NULL); 5287 } 5288 LIST_INIT(&ahd->pending_scbs); 5289 LIST_INIT(&ahd->timedout_scbs); 5290 /* We don't know our unit number until the OSM sets it */ 5291 ahd->name = name; 5292 ahd->unit = -1; 5293 ahd->description = NULL; 5294 ahd->bus_description = NULL; 5295 ahd->channel = 'A'; 5296 ahd->chip = AHD_NONE; 5297 ahd->features = AHD_FENONE; 5298 ahd->bugs = AHD_BUGNONE; 5299 ahd->flags = AHD_SPCHK_ENB_A|AHD_RESET_BUS_A|AHD_TERM_ENB_A 5300 | AHD_EXTENDED_TRANS_A|AHD_STPWLEVEL_A; 5301 aic_timer_init(&ahd->reset_timer); 5302 aic_timer_init(&ahd->stat_timer); 5303 ahd->int_coalescing_timer = AHD_INT_COALESCING_TIMER_DEFAULT; 5304 ahd->int_coalescing_maxcmds = AHD_INT_COALESCING_MAXCMDS_DEFAULT; 5305 ahd->int_coalescing_mincmds = AHD_INT_COALESCING_MINCMDS_DEFAULT; 5306 ahd->int_coalescing_threshold = AHD_INT_COALESCING_THRESHOLD_DEFAULT; 5307 ahd->int_coalescing_stop_threshold = 5308 AHD_INT_COALESCING_STOP_THRESHOLD_DEFAULT; 5309 5310 if (ahd_platform_alloc(ahd, platform_arg) != 0) { 5311 ahd_free(ahd); 5312 ahd = NULL; 5313 } 5314 ahd_lockinit(ahd); 5315 #ifdef AHD_DEBUG 5316 if ((ahd_debug & AHD_SHOW_MEMORY) != 0) { 5317 printf("%s: scb size = 0x%x, hscb size = 0x%x\n", 5318 ahd_name(ahd), (u_int)sizeof(struct scb), 5319 (u_int)sizeof(struct hardware_scb)); 5320 } 5321 #endif 5322 return (ahd); 5323 } 5324 5325 int 5326 ahd_softc_init(struct ahd_softc *ahd) 5327 { 5328 5329 ahd->unpause = 0; 5330 ahd->pause = PAUSE; 5331 return (0); 5332 } 5333 5334 void 5335 ahd_softc_insert(struct ahd_softc *ahd) 5336 { 5337 struct ahd_softc *list_ahd; 5338 5339 #if AIC_PCI_CONFIG > 0 5340 /* 5341 * Second Function PCI devices need to inherit some 5342 * settings from function 0. 5343 */ 5344 if ((ahd->features & AHD_MULTI_FUNC) != 0) { 5345 TAILQ_FOREACH(list_ahd, &ahd_tailq, links) { 5346 aic_dev_softc_t list_pci; 5347 aic_dev_softc_t pci; 5348 5349 list_pci = list_ahd->dev_softc; 5350 pci = ahd->dev_softc; 5351 if (aic_get_pci_slot(list_pci) == aic_get_pci_slot(pci) 5352 && aic_get_pci_bus(list_pci) == aic_get_pci_bus(pci)) { 5353 struct ahd_softc *master; 5354 struct ahd_softc *slave; 5355 5356 if (aic_get_pci_function(list_pci) == 0) { 5357 master = list_ahd; 5358 slave = ahd; 5359 } else { 5360 master = ahd; 5361 slave = list_ahd; 5362 } 5363 slave->flags &= ~AHD_BIOS_ENABLED; 5364 slave->flags |= 5365 master->flags & AHD_BIOS_ENABLED; 5366 break; 5367 } 5368 } 5369 } 5370 #endif 5371 5372 /* 5373 * Insertion sort into our list of softcs. 5374 */ 5375 list_ahd = TAILQ_FIRST(&ahd_tailq); 5376 while (list_ahd != NULL 5377 && ahd_softc_comp(ahd, list_ahd) <= 0) 5378 list_ahd = TAILQ_NEXT(list_ahd, links); 5379 if (list_ahd != NULL) 5380 TAILQ_INSERT_BEFORE(list_ahd, ahd, links); 5381 else 5382 TAILQ_INSERT_TAIL(&ahd_tailq, ahd, links); 5383 ahd->init_level++; 5384 } 5385 5386 void 5387 ahd_set_unit(struct ahd_softc *ahd, int unit) 5388 { 5389 ahd->unit = unit; 5390 } 5391 5392 void 5393 ahd_set_name(struct ahd_softc *ahd, char *name) 5394 { 5395 if (ahd->name != NULL) 5396 free(ahd->name, M_DEVBUF); 5397 ahd->name = name; 5398 } 5399 5400 void 5401 ahd_free(struct ahd_softc *ahd) 5402 { 5403 int i; 5404 5405 ahd_terminate_recovery_thread(ahd); 5406 switch (ahd->init_level) { 5407 default: 5408 case 5: 5409 ahd_shutdown(ahd); 5410 /* FALLTHROUGH */ 5411 case 4: 5412 aic_dmamap_unload(ahd, ahd->shared_data_dmat, 5413 ahd->shared_data_map.dmamap); 5414 /* FALLTHROUGH */ 5415 case 3: 5416 aic_dmamem_free(ahd, ahd->shared_data_dmat, ahd->qoutfifo, 5417 ahd->shared_data_map.dmamap); 5418 /* FALLTHROUGH */ 5419 case 2: 5420 aic_dma_tag_destroy(ahd, ahd->shared_data_dmat); 5421 case 1: 5422 #ifndef __linux__ 5423 aic_dma_tag_destroy(ahd, ahd->buffer_dmat); 5424 #endif 5425 break; 5426 case 0: 5427 break; 5428 } 5429 5430 #ifndef __linux__ 5431 aic_dma_tag_destroy(ahd, ahd->parent_dmat); 5432 #endif 5433 ahd_platform_free(ahd); 5434 ahd_fini_scbdata(ahd); 5435 for (i = 0; i < AHD_NUM_TARGETS; i++) { 5436 struct ahd_tmode_tstate *tstate; 5437 5438 tstate = ahd->enabled_targets[i]; 5439 if (tstate != NULL) { 5440 #ifdef AHD_TARGET_MODE 5441 int j; 5442 5443 for (j = 0; j < AHD_NUM_LUNS; j++) { 5444 struct ahd_tmode_lstate *lstate; 5445 5446 lstate = tstate->enabled_luns[j]; 5447 if (lstate != NULL) { 5448 xpt_free_path(lstate->path); 5449 free(lstate, M_DEVBUF); 5450 } 5451 } 5452 #endif 5453 free(tstate, M_DEVBUF); 5454 } 5455 } 5456 #ifdef AHD_TARGET_MODE 5457 if (ahd->black_hole != NULL) { 5458 xpt_free_path(ahd->black_hole->path); 5459 free(ahd->black_hole, M_DEVBUF); 5460 } 5461 #endif 5462 if (ahd->name != NULL) 5463 free(ahd->name, M_DEVBUF); 5464 if (ahd->seep_config != NULL) 5465 free(ahd->seep_config, M_DEVBUF); 5466 if (ahd->saved_stack != NULL) 5467 free(ahd->saved_stack, M_DEVBUF); 5468 #ifndef __FreeBSD__ 5469 free(ahd, M_DEVBUF); 5470 #endif 5471 return; 5472 } 5473 5474 void 5475 ahd_shutdown(void *arg) 5476 { 5477 struct ahd_softc *ahd; 5478 5479 ahd = (struct ahd_softc *)arg; 5480 5481 /* 5482 * Stop periodic timer callbacks. 5483 */ 5484 aic_timer_stop(&ahd->reset_timer); 5485 aic_timer_stop(&ahd->stat_timer); 5486 5487 /* This will reset most registers to 0, but not all */ 5488 ahd_reset(ahd, /*reinit*/FALSE); 5489 } 5490 5491 /* 5492 * Reset the controller and record some information about it 5493 * that is only available just after a reset. If "reinit" is 5494 * non-zero, this reset occurred after initial configuration 5495 * and the caller requests that the chip be fully reinitialized 5496 * to a runable state. Chip interrupts are *not* enabled after 5497 * a reinitialization. The caller must enable interrupts via 5498 * ahd_intr_enable(). 5499 */ 5500 int 5501 ahd_reset(struct ahd_softc *ahd, int reinit) 5502 { 5503 u_int sxfrctl1; 5504 int wait; 5505 uint32_t cmd; 5506 5507 /* 5508 * Preserve the value of the SXFRCTL1 register for all channels. 5509 * It contains settings that affect termination and we don't want 5510 * to disturb the integrity of the bus. 5511 */ 5512 ahd_pause(ahd); 5513 ahd_update_modes(ahd); 5514 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5515 sxfrctl1 = ahd_inb(ahd, SXFRCTL1); 5516 5517 cmd = aic_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/2); 5518 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) { 5519 uint32_t mod_cmd; 5520 5521 /* 5522 * A4 Razor #632 5523 * During the assertion of CHIPRST, the chip 5524 * does not disable its parity logic prior to 5525 * the start of the reset. This may cause a 5526 * parity error to be detected and thus a 5527 * spurious SERR or PERR assertion. Disble 5528 * PERR and SERR responses during the CHIPRST. 5529 */ 5530 mod_cmd = cmd & ~(PCIM_CMD_PERRESPEN|PCIM_CMD_SERRESPEN); 5531 aic_pci_write_config(ahd->dev_softc, PCIR_COMMAND, 5532 mod_cmd, /*bytes*/2); 5533 } 5534 ahd_outb(ahd, HCNTRL, CHIPRST | ahd->pause); 5535 5536 /* 5537 * Ensure that the reset has finished. We delay 1000us 5538 * prior to reading the register to make sure the chip 5539 * has sufficiently completed its reset to handle register 5540 * accesses. 5541 */ 5542 wait = 1000; 5543 do { 5544 aic_delay(1000); 5545 } while (--wait && !(ahd_inb(ahd, HCNTRL) & CHIPRSTACK)); 5546 5547 if (wait == 0) { 5548 printf("%s: WARNING - Failed chip reset! " 5549 "Trying to initialize anyway.\n", ahd_name(ahd)); 5550 AHD_FATAL_ERROR(ahd); 5551 } 5552 ahd_outb(ahd, HCNTRL, ahd->pause); 5553 5554 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) { 5555 /* 5556 * Clear any latched PCI error status and restore 5557 * previous SERR and PERR response enables. 5558 */ 5559 aic_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1, 5560 0xFF, /*bytes*/1); 5561 aic_pci_write_config(ahd->dev_softc, PCIR_COMMAND, 5562 cmd, /*bytes*/2); 5563 } 5564 5565 /* 5566 * Mode should be SCSI after a chip reset, but lets 5567 * set it just to be safe. We touch the MODE_PTR 5568 * register directly so as to bypass the lazy update 5569 * code in ahd_set_modes(). 5570 */ 5571 ahd_known_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5572 ahd_outb(ahd, MODE_PTR, 5573 ahd_build_mode_state(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI)); 5574 5575 /* 5576 * Restore SXFRCTL1. 5577 * 5578 * We must always initialize STPWEN to 1 before we 5579 * restore the saved values. STPWEN is initialized 5580 * to a tri-state condition which can only be cleared 5581 * by turning it on. 5582 */ 5583 ahd_outb(ahd, SXFRCTL1, sxfrctl1|STPWEN); 5584 ahd_outb(ahd, SXFRCTL1, sxfrctl1); 5585 5586 /* Determine chip configuration */ 5587 ahd->features &= ~AHD_WIDE; 5588 if ((ahd_inb(ahd, SBLKCTL) & SELWIDE) != 0) 5589 ahd->features |= AHD_WIDE; 5590 5591 /* 5592 * If a recovery action has forced a chip reset, 5593 * re-initialize the chip to our liking. 5594 */ 5595 if (reinit != 0) 5596 ahd_chip_init(ahd); 5597 5598 return (0); 5599 } 5600 5601 /* 5602 * Determine the number of SCBs available on the controller 5603 */ 5604 int 5605 ahd_probe_scbs(struct ahd_softc *ahd) { 5606 int i; 5607 5608 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 5609 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 5610 for (i = 0; i < AHD_SCB_MAX; i++) { 5611 int j; 5612 5613 ahd_set_scbptr(ahd, i); 5614 ahd_outw(ahd, SCB_BASE, i); 5615 for (j = 2; j < 64; j++) 5616 ahd_outb(ahd, SCB_BASE+j, 0); 5617 /* Start out life as unallocated (needing an abort) */ 5618 ahd_outb(ahd, SCB_CONTROL, MK_MESSAGE); 5619 if (ahd_inw_scbram(ahd, SCB_BASE) != i) 5620 break; 5621 ahd_set_scbptr(ahd, 0); 5622 if (ahd_inw_scbram(ahd, SCB_BASE) != 0) 5623 break; 5624 } 5625 return (i); 5626 } 5627 5628 static void 5629 ahd_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) 5630 { 5631 bus_addr_t *baddr; 5632 5633 baddr = (bus_addr_t *)arg; 5634 *baddr = segs->ds_addr; 5635 } 5636 5637 static void 5638 ahd_initialize_hscbs(struct ahd_softc *ahd) 5639 { 5640 int i; 5641 5642 for (i = 0; i < ahd->scb_data.maxhscbs; i++) { 5643 ahd_set_scbptr(ahd, i); 5644 5645 /* Clear the control byte. */ 5646 ahd_outb(ahd, SCB_CONTROL, 0); 5647 5648 /* Set the next pointer */ 5649 ahd_outw(ahd, SCB_NEXT, SCB_LIST_NULL); 5650 } 5651 } 5652 5653 static int 5654 ahd_init_scbdata(struct ahd_softc *ahd) 5655 { 5656 struct scb_data *scb_data; 5657 int i; 5658 5659 scb_data = &ahd->scb_data; 5660 TAILQ_INIT(&scb_data->free_scbs); 5661 for (i = 0; i < AHD_NUM_TARGETS * AHD_NUM_LUNS_NONPKT; i++) 5662 LIST_INIT(&scb_data->free_scb_lists[i]); 5663 LIST_INIT(&scb_data->any_dev_free_scb_list); 5664 SLIST_INIT(&scb_data->hscb_maps); 5665 SLIST_INIT(&scb_data->sg_maps); 5666 SLIST_INIT(&scb_data->sense_maps); 5667 5668 /* Determine the number of hardware SCBs and initialize them */ 5669 scb_data->maxhscbs = ahd_probe_scbs(ahd); 5670 if (scb_data->maxhscbs == 0) { 5671 printf("%s: No SCB space found\n", ahd_name(ahd)); 5672 AHD_FATAL_ERROR(ahd); 5673 return (ENXIO); 5674 } 5675 5676 ahd_initialize_hscbs(ahd); 5677 5678 /* 5679 * Create our DMA tags. These tags define the kinds of device 5680 * accessible memory allocations and memory mappings we will 5681 * need to perform during normal operation. 5682 * 5683 * Unless we need to further restrict the allocation, we rely 5684 * on the restrictions of the parent dmat, hence the common 5685 * use of MAXADDR and MAXSIZE. 5686 */ 5687 5688 /* DMA tag for our hardware scb structures */ 5689 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1, 5690 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 5691 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 5692 /*highaddr*/BUS_SPACE_MAXADDR, 5693 /*filter*/NULL, /*filterarg*/NULL, 5694 PAGE_SIZE, /*nsegments*/1, 5695 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 5696 /*flags*/0, &scb_data->hscb_dmat) != 0) { 5697 goto error_exit; 5698 } 5699 5700 scb_data->init_level++; 5701 5702 /* DMA tag for our S/G structures. */ 5703 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/8, 5704 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 5705 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 5706 /*highaddr*/BUS_SPACE_MAXADDR, 5707 /*filter*/NULL, /*filterarg*/NULL, 5708 ahd_sglist_allocsize(ahd), /*nsegments*/1, 5709 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 5710 /*flags*/0, &scb_data->sg_dmat) != 0) { 5711 goto error_exit; 5712 } 5713 #ifdef AHD_DEBUG 5714 if ((ahd_debug & AHD_SHOW_MEMORY) != 0) 5715 printf("%s: ahd_sglist_allocsize = 0x%x\n", ahd_name(ahd), 5716 ahd_sglist_allocsize(ahd)); 5717 #endif 5718 5719 scb_data->init_level++; 5720 5721 /* DMA tag for our sense buffers. We allocate in page sized chunks */ 5722 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1, 5723 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 5724 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 5725 /*highaddr*/BUS_SPACE_MAXADDR, 5726 /*filter*/NULL, /*filterarg*/NULL, 5727 PAGE_SIZE, /*nsegments*/1, 5728 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 5729 /*flags*/0, &scb_data->sense_dmat) != 0) { 5730 goto error_exit; 5731 } 5732 5733 scb_data->init_level++; 5734 5735 /* Perform initial CCB allocation */ 5736 while (ahd_alloc_scbs(ahd) != 0) 5737 ; 5738 5739 if (scb_data->numscbs == 0) { 5740 printf("%s: ahd_init_scbdata - " 5741 "Unable to allocate initial scbs\n", 5742 ahd_name(ahd)); 5743 goto error_exit; 5744 } 5745 5746 /* 5747 * Note that we were successful 5748 */ 5749 return (0); 5750 5751 error_exit: 5752 5753 return (ENOMEM); 5754 } 5755 5756 static struct scb * 5757 ahd_find_scb_by_tag(struct ahd_softc *ahd, u_int tag) 5758 { 5759 struct scb *scb; 5760 5761 /* 5762 * Look on the pending list. 5763 */ 5764 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 5765 if (SCB_GET_TAG(scb) == tag) 5766 return (scb); 5767 } 5768 5769 /* 5770 * Then on all of the collision free lists. 5771 */ 5772 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 5773 struct scb *list_scb; 5774 5775 list_scb = scb; 5776 do { 5777 if (SCB_GET_TAG(list_scb) == tag) 5778 return (list_scb); 5779 list_scb = LIST_NEXT(list_scb, collision_links); 5780 } while (list_scb); 5781 } 5782 5783 /* 5784 * And finally on the generic free list. 5785 */ 5786 LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) { 5787 if (SCB_GET_TAG(scb) == tag) 5788 return (scb); 5789 } 5790 5791 return (NULL); 5792 } 5793 5794 static void 5795 ahd_fini_scbdata(struct ahd_softc *ahd) 5796 { 5797 struct scb_data *scb_data; 5798 5799 scb_data = &ahd->scb_data; 5800 if (scb_data == NULL) 5801 return; 5802 5803 switch (scb_data->init_level) { 5804 default: 5805 case 7: 5806 { 5807 struct map_node *sns_map; 5808 5809 while ((sns_map = SLIST_FIRST(&scb_data->sense_maps)) != NULL) { 5810 SLIST_REMOVE_HEAD(&scb_data->sense_maps, links); 5811 aic_dmamap_unload(ahd, scb_data->sense_dmat, 5812 sns_map->dmamap); 5813 aic_dmamem_free(ahd, scb_data->sense_dmat, 5814 sns_map->vaddr, sns_map->dmamap); 5815 free(sns_map, M_DEVBUF); 5816 } 5817 aic_dma_tag_destroy(ahd, scb_data->sense_dmat); 5818 /* FALLTHROUGH */ 5819 } 5820 case 6: 5821 { 5822 struct map_node *sg_map; 5823 5824 while ((sg_map = SLIST_FIRST(&scb_data->sg_maps)) != NULL) { 5825 SLIST_REMOVE_HEAD(&scb_data->sg_maps, links); 5826 aic_dmamap_unload(ahd, scb_data->sg_dmat, 5827 sg_map->dmamap); 5828 aic_dmamem_free(ahd, scb_data->sg_dmat, 5829 sg_map->vaddr, sg_map->dmamap); 5830 free(sg_map, M_DEVBUF); 5831 } 5832 aic_dma_tag_destroy(ahd, scb_data->sg_dmat); 5833 /* FALLTHROUGH */ 5834 } 5835 case 5: 5836 { 5837 struct map_node *hscb_map; 5838 5839 while ((hscb_map = SLIST_FIRST(&scb_data->hscb_maps)) != NULL) { 5840 SLIST_REMOVE_HEAD(&scb_data->hscb_maps, links); 5841 aic_dmamap_unload(ahd, scb_data->hscb_dmat, 5842 hscb_map->dmamap); 5843 aic_dmamem_free(ahd, scb_data->hscb_dmat, 5844 hscb_map->vaddr, hscb_map->dmamap); 5845 free(hscb_map, M_DEVBUF); 5846 } 5847 aic_dma_tag_destroy(ahd, scb_data->hscb_dmat); 5848 /* FALLTHROUGH */ 5849 } 5850 case 4: 5851 case 3: 5852 case 2: 5853 case 1: 5854 case 0: 5855 break; 5856 } 5857 } 5858 5859 /* 5860 * DSP filter Bypass must be enabled until the first selection 5861 * after a change in bus mode (Razor #491 and #493). 5862 */ 5863 static void 5864 ahd_setup_iocell_workaround(struct ahd_softc *ahd) 5865 { 5866 ahd_mode_state saved_modes; 5867 5868 saved_modes = ahd_save_modes(ahd); 5869 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 5870 ahd_outb(ahd, DSPDATACTL, ahd_inb(ahd, DSPDATACTL) 5871 | BYPASSENAB | RCVROFFSTDIS | XMITOFFSTDIS); 5872 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) | (ENSELDO|ENSELDI)); 5873 #ifdef AHD_DEBUG 5874 if ((ahd_debug & AHD_SHOW_MISC) != 0) 5875 printf("%s: Setting up iocell workaround\n", ahd_name(ahd)); 5876 #endif 5877 ahd_restore_modes(ahd, saved_modes); 5878 ahd->flags &= ~AHD_HAD_FIRST_SEL; 5879 } 5880 5881 static void 5882 ahd_iocell_first_selection(struct ahd_softc *ahd) 5883 { 5884 ahd_mode_state saved_modes; 5885 u_int sblkctl; 5886 5887 if ((ahd->flags & AHD_HAD_FIRST_SEL) != 0) 5888 return; 5889 saved_modes = ahd_save_modes(ahd); 5890 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5891 sblkctl = ahd_inb(ahd, SBLKCTL); 5892 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 5893 #ifdef AHD_DEBUG 5894 if ((ahd_debug & AHD_SHOW_MISC) != 0) 5895 printf("%s: iocell first selection\n", ahd_name(ahd)); 5896 #endif 5897 if ((sblkctl & ENAB40) != 0) { 5898 ahd_outb(ahd, DSPDATACTL, 5899 ahd_inb(ahd, DSPDATACTL) & ~BYPASSENAB); 5900 #ifdef AHD_DEBUG 5901 if ((ahd_debug & AHD_SHOW_MISC) != 0) 5902 printf("%s: BYPASS now disabled\n", ahd_name(ahd)); 5903 #endif 5904 } 5905 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) & ~(ENSELDO|ENSELDI)); 5906 ahd_outb(ahd, CLRINT, CLRSCSIINT); 5907 ahd_restore_modes(ahd, saved_modes); 5908 ahd->flags |= AHD_HAD_FIRST_SEL; 5909 } 5910 5911 /*************************** SCB Management ***********************************/ 5912 static void 5913 ahd_add_col_list(struct ahd_softc *ahd, struct scb *scb, u_int col_idx) 5914 { 5915 struct scb_list *free_list; 5916 struct scb_tailq *free_tailq; 5917 struct scb *first_scb; 5918 5919 scb->flags |= SCB_ON_COL_LIST; 5920 AHD_SET_SCB_COL_IDX(scb, col_idx); 5921 free_list = &ahd->scb_data.free_scb_lists[col_idx]; 5922 free_tailq = &ahd->scb_data.free_scbs; 5923 first_scb = LIST_FIRST(free_list); 5924 if (first_scb != NULL) { 5925 LIST_INSERT_AFTER(first_scb, scb, collision_links); 5926 } else { 5927 LIST_INSERT_HEAD(free_list, scb, collision_links); 5928 TAILQ_INSERT_TAIL(free_tailq, scb, links.tqe); 5929 } 5930 } 5931 5932 static void 5933 ahd_rem_col_list(struct ahd_softc *ahd, struct scb *scb) 5934 { 5935 struct scb_list *free_list; 5936 struct scb_tailq *free_tailq; 5937 struct scb *first_scb; 5938 u_int col_idx; 5939 5940 scb->flags &= ~SCB_ON_COL_LIST; 5941 col_idx = AHD_GET_SCB_COL_IDX(ahd, scb); 5942 free_list = &ahd->scb_data.free_scb_lists[col_idx]; 5943 free_tailq = &ahd->scb_data.free_scbs; 5944 first_scb = LIST_FIRST(free_list); 5945 if (first_scb == scb) { 5946 struct scb *next_scb; 5947 5948 /* 5949 * Maintain order in the collision free 5950 * lists for fairness if this device has 5951 * other colliding tags active. 5952 */ 5953 next_scb = LIST_NEXT(scb, collision_links); 5954 if (next_scb != NULL) { 5955 TAILQ_INSERT_AFTER(free_tailq, scb, 5956 next_scb, links.tqe); 5957 } 5958 TAILQ_REMOVE(free_tailq, scb, links.tqe); 5959 } 5960 LIST_REMOVE(scb, collision_links); 5961 } 5962 5963 /* 5964 * Get a free scb. If there are none, see if we can allocate a new SCB. 5965 */ 5966 struct scb * 5967 ahd_get_scb(struct ahd_softc *ahd, u_int col_idx) 5968 { 5969 struct scb *scb; 5970 int tries; 5971 5972 tries = 0; 5973 look_again: 5974 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 5975 if (AHD_GET_SCB_COL_IDX(ahd, scb) != col_idx) { 5976 ahd_rem_col_list(ahd, scb); 5977 goto found; 5978 } 5979 } 5980 if ((scb = LIST_FIRST(&ahd->scb_data.any_dev_free_scb_list)) == NULL) { 5981 5982 if (tries++ != 0) 5983 return (NULL); 5984 if (ahd_alloc_scbs(ahd) == 0) 5985 return (NULL); 5986 goto look_again; 5987 } 5988 LIST_REMOVE(scb, links.le); 5989 if (col_idx != AHD_NEVER_COL_IDX 5990 && (scb->col_scb != NULL) 5991 && (scb->col_scb->flags & SCB_ACTIVE) == 0) { 5992 LIST_REMOVE(scb->col_scb, links.le); 5993 ahd_add_col_list(ahd, scb->col_scb, col_idx); 5994 } 5995 found: 5996 scb->flags |= SCB_ACTIVE; 5997 return (scb); 5998 } 5999 6000 /* 6001 * Return an SCB resource to the free list. 6002 */ 6003 void 6004 ahd_free_scb(struct ahd_softc *ahd, struct scb *scb) 6005 { 6006 6007 /* Clean up for the next user */ 6008 scb->flags = SCB_FLAG_NONE; 6009 scb->hscb->control = 0; 6010 ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = NULL; 6011 6012 if (scb->col_scb == NULL) { 6013 6014 /* 6015 * No collision possible. Just free normally. 6016 */ 6017 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 6018 scb, links.le); 6019 } else if ((scb->col_scb->flags & SCB_ON_COL_LIST) != 0) { 6020 6021 /* 6022 * The SCB we might have collided with is on 6023 * a free collision list. Put both SCBs on 6024 * the generic list. 6025 */ 6026 ahd_rem_col_list(ahd, scb->col_scb); 6027 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 6028 scb, links.le); 6029 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 6030 scb->col_scb, links.le); 6031 } else if ((scb->col_scb->flags 6032 & (SCB_PACKETIZED|SCB_ACTIVE)) == SCB_ACTIVE 6033 && (scb->col_scb->hscb->control & TAG_ENB) != 0) { 6034 6035 /* 6036 * The SCB we might collide with on the next allocation 6037 * is still active in a non-packetized, tagged, context. 6038 * Put us on the SCB collision list. 6039 */ 6040 ahd_add_col_list(ahd, scb, 6041 AHD_GET_SCB_COL_IDX(ahd, scb->col_scb)); 6042 } else { 6043 /* 6044 * The SCB we might collide with on the next allocation 6045 * is either active in a packetized context, or free. 6046 * Since we can't collide, put this SCB on the generic 6047 * free list. 6048 */ 6049 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 6050 scb, links.le); 6051 } 6052 6053 aic_platform_scb_free(ahd, scb); 6054 } 6055 6056 int 6057 ahd_alloc_scbs(struct ahd_softc *ahd) 6058 { 6059 struct scb_data *scb_data; 6060 struct scb *next_scb; 6061 struct hardware_scb *hscb; 6062 struct map_node *hscb_map; 6063 struct map_node *sg_map; 6064 struct map_node *sense_map; 6065 uint8_t *segs; 6066 uint8_t *sense_data; 6067 bus_addr_t hscb_busaddr; 6068 bus_addr_t sg_busaddr; 6069 bus_addr_t sense_busaddr; 6070 int newcount; 6071 int i; 6072 6073 scb_data = &ahd->scb_data; 6074 if (scb_data->numscbs >= AHD_SCB_MAX_ALLOC) 6075 /* Can't allocate any more */ 6076 return (0); 6077 6078 if (scb_data->scbs_left != 0) { 6079 int offset; 6080 6081 offset = (PAGE_SIZE / sizeof(*hscb)) - scb_data->scbs_left; 6082 hscb_map = SLIST_FIRST(&scb_data->hscb_maps); 6083 hscb = &((struct hardware_scb *)hscb_map->vaddr)[offset]; 6084 hscb_busaddr = hscb_map->busaddr + (offset * sizeof(*hscb)); 6085 } else { 6086 hscb_map = malloc(sizeof(*hscb_map), M_DEVBUF, M_NOWAIT); 6087 6088 if (hscb_map == NULL) 6089 return (0); 6090 6091 /* Allocate the next batch of hardware SCBs */ 6092 if (aic_dmamem_alloc(ahd, scb_data->hscb_dmat, 6093 (void **)&hscb_map->vaddr, 6094 BUS_DMA_NOWAIT | BUS_DMA_COHERENT, 6095 &hscb_map->dmamap) != 0) { 6096 free(hscb_map, M_DEVBUF); 6097 return (0); 6098 } 6099 6100 SLIST_INSERT_HEAD(&scb_data->hscb_maps, hscb_map, links); 6101 6102 aic_dmamap_load(ahd, scb_data->hscb_dmat, hscb_map->dmamap, 6103 hscb_map->vaddr, PAGE_SIZE, ahd_dmamap_cb, 6104 &hscb_map->busaddr, /*flags*/0); 6105 6106 hscb = (struct hardware_scb *)hscb_map->vaddr; 6107 hscb_busaddr = hscb_map->busaddr; 6108 scb_data->scbs_left = PAGE_SIZE / sizeof(*hscb); 6109 } 6110 6111 if (scb_data->sgs_left != 0) { 6112 int offset; 6113 6114 offset = ((ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd)) 6115 - scb_data->sgs_left) * ahd_sglist_size(ahd); 6116 sg_map = SLIST_FIRST(&scb_data->sg_maps); 6117 segs = sg_map->vaddr + offset; 6118 sg_busaddr = sg_map->busaddr + offset; 6119 } else { 6120 sg_map = malloc(sizeof(*sg_map), M_DEVBUF, M_NOWAIT); 6121 6122 if (sg_map == NULL) 6123 return (0); 6124 6125 /* Allocate the next batch of S/G lists */ 6126 if (aic_dmamem_alloc(ahd, scb_data->sg_dmat, 6127 (void **)&sg_map->vaddr, 6128 BUS_DMA_NOWAIT | BUS_DMA_COHERENT, 6129 &sg_map->dmamap) != 0) { 6130 free(sg_map, M_DEVBUF); 6131 return (0); 6132 } 6133 6134 SLIST_INSERT_HEAD(&scb_data->sg_maps, sg_map, links); 6135 6136 aic_dmamap_load(ahd, scb_data->sg_dmat, sg_map->dmamap, 6137 sg_map->vaddr, ahd_sglist_allocsize(ahd), 6138 ahd_dmamap_cb, &sg_map->busaddr, /*flags*/0); 6139 6140 segs = sg_map->vaddr; 6141 sg_busaddr = sg_map->busaddr; 6142 scb_data->sgs_left = 6143 ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd); 6144 #ifdef AHD_DEBUG 6145 if (ahd_debug & AHD_SHOW_MEMORY) 6146 printf("Mapped SG data\n"); 6147 #endif 6148 } 6149 6150 if (scb_data->sense_left != 0) { 6151 int offset; 6152 6153 offset = PAGE_SIZE - (AHD_SENSE_BUFSIZE * scb_data->sense_left); 6154 sense_map = SLIST_FIRST(&scb_data->sense_maps); 6155 sense_data = sense_map->vaddr + offset; 6156 sense_busaddr = sense_map->busaddr + offset; 6157 } else { 6158 sense_map = malloc(sizeof(*sense_map), M_DEVBUF, M_NOWAIT); 6159 6160 if (sense_map == NULL) 6161 return (0); 6162 6163 /* Allocate the next batch of sense buffers */ 6164 if (aic_dmamem_alloc(ahd, scb_data->sense_dmat, 6165 (void **)&sense_map->vaddr, 6166 BUS_DMA_NOWAIT, &sense_map->dmamap) != 0) { 6167 free(sense_map, M_DEVBUF); 6168 return (0); 6169 } 6170 6171 SLIST_INSERT_HEAD(&scb_data->sense_maps, sense_map, links); 6172 6173 aic_dmamap_load(ahd, scb_data->sense_dmat, sense_map->dmamap, 6174 sense_map->vaddr, PAGE_SIZE, ahd_dmamap_cb, 6175 &sense_map->busaddr, /*flags*/0); 6176 6177 sense_data = sense_map->vaddr; 6178 sense_busaddr = sense_map->busaddr; 6179 scb_data->sense_left = PAGE_SIZE / AHD_SENSE_BUFSIZE; 6180 #ifdef AHD_DEBUG 6181 if (ahd_debug & AHD_SHOW_MEMORY) 6182 printf("Mapped sense data\n"); 6183 #endif 6184 } 6185 6186 newcount = MIN(scb_data->sense_left, scb_data->scbs_left); 6187 newcount = MIN(newcount, scb_data->sgs_left); 6188 newcount = MIN(newcount, (AHD_SCB_MAX_ALLOC - scb_data->numscbs)); 6189 scb_data->sense_left -= newcount; 6190 scb_data->scbs_left -= newcount; 6191 scb_data->sgs_left -= newcount; 6192 for (i = 0; i < newcount; i++) { 6193 struct scb_platform_data *pdata; 6194 u_int col_tag; 6195 #ifndef __linux__ 6196 int error; 6197 #endif 6198 6199 next_scb = (struct scb *)malloc(sizeof(*next_scb), 6200 M_DEVBUF, M_NOWAIT); 6201 if (next_scb == NULL) 6202 break; 6203 6204 pdata = (struct scb_platform_data *)malloc(sizeof(*pdata), 6205 M_DEVBUF, M_NOWAIT); 6206 if (pdata == NULL) { 6207 free(next_scb, M_DEVBUF); 6208 break; 6209 } 6210 next_scb->platform_data = pdata; 6211 next_scb->hscb_map = hscb_map; 6212 next_scb->sg_map = sg_map; 6213 next_scb->sense_map = sense_map; 6214 next_scb->sg_list = segs; 6215 next_scb->sense_data = sense_data; 6216 next_scb->sense_busaddr = sense_busaddr; 6217 memset(hscb, 0, sizeof(*hscb)); 6218 next_scb->hscb = hscb; 6219 hscb->hscb_busaddr = aic_htole32(hscb_busaddr); 6220 6221 /* 6222 * The sequencer always starts with the second entry. 6223 * The first entry is embedded in the scb. 6224 */ 6225 next_scb->sg_list_busaddr = sg_busaddr; 6226 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 6227 next_scb->sg_list_busaddr 6228 += sizeof(struct ahd_dma64_seg); 6229 else 6230 next_scb->sg_list_busaddr += sizeof(struct ahd_dma_seg); 6231 next_scb->ahd_softc = ahd; 6232 next_scb->flags = SCB_FLAG_NONE; 6233 #ifndef __linux__ 6234 error = aic_dmamap_create(ahd, ahd->buffer_dmat, /*flags*/0, 6235 &next_scb->dmamap); 6236 if (error != 0) { 6237 free(next_scb, M_DEVBUF); 6238 free(pdata, M_DEVBUF); 6239 break; 6240 } 6241 #endif 6242 next_scb->hscb->tag = aic_htole16(scb_data->numscbs); 6243 col_tag = scb_data->numscbs ^ 0x100; 6244 next_scb->col_scb = ahd_find_scb_by_tag(ahd, col_tag); 6245 if (next_scb->col_scb != NULL) 6246 next_scb->col_scb->col_scb = next_scb; 6247 aic_timer_init(&next_scb->io_timer); 6248 ahd_free_scb(ahd, next_scb); 6249 hscb++; 6250 hscb_busaddr += sizeof(*hscb); 6251 segs += ahd_sglist_size(ahd); 6252 sg_busaddr += ahd_sglist_size(ahd); 6253 sense_data += AHD_SENSE_BUFSIZE; 6254 sense_busaddr += AHD_SENSE_BUFSIZE; 6255 scb_data->numscbs++; 6256 } 6257 return (i); 6258 } 6259 6260 void 6261 ahd_controller_info(struct ahd_softc *ahd, char *buf) 6262 { 6263 const char *speed; 6264 const char *type; 6265 int len; 6266 6267 len = sprintf(buf, "%s: ", ahd_chip_names[ahd->chip & AHD_CHIPID_MASK]); 6268 buf += len; 6269 6270 speed = "Ultra320 "; 6271 if ((ahd->features & AHD_WIDE) != 0) { 6272 type = "Wide "; 6273 } else { 6274 type = "Single "; 6275 } 6276 len = sprintf(buf, "%s%sChannel %c, SCSI Id=%d, ", 6277 speed, type, ahd->channel, ahd->our_id); 6278 buf += len; 6279 6280 sprintf(buf, "%s, %d SCBs", ahd->bus_description, 6281 ahd->scb_data.maxhscbs); 6282 } 6283 6284 static const char *channel_strings[] = { 6285 "Primary Low", 6286 "Primary High", 6287 "Secondary Low", 6288 "Secondary High" 6289 }; 6290 6291 static const char *termstat_strings[] = { 6292 "Terminated Correctly", 6293 "Over Terminated", 6294 "Under Terminated", 6295 "Not Configured" 6296 }; 6297 6298 /* 6299 * Start the board, ready for normal operation 6300 */ 6301 int 6302 ahd_init(struct ahd_softc *ahd) 6303 { 6304 uint8_t *next_vaddr; 6305 bus_addr_t next_baddr; 6306 size_t driver_data_size; 6307 int i; 6308 int error; 6309 u_int warn_user; 6310 uint8_t current_sensing; 6311 uint8_t fstat; 6312 6313 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 6314 6315 ahd->stack_size = ahd_probe_stack_size(ahd); 6316 ahd->saved_stack = malloc(ahd->stack_size * sizeof(uint16_t), 6317 M_DEVBUF, M_NOWAIT); 6318 if (ahd->saved_stack == NULL) 6319 return (ENOMEM); 6320 6321 /* 6322 * Verify that the compiler hasn't over-agressively 6323 * padded important structures. 6324 */ 6325 if (sizeof(struct hardware_scb) != 64) 6326 panic("Hardware SCB size is incorrect"); 6327 6328 #ifdef AHD_DEBUG 6329 if ((ahd_debug & AHD_DEBUG_SEQUENCER) != 0) 6330 ahd->flags |= AHD_SEQUENCER_DEBUG; 6331 #endif 6332 6333 /* 6334 * Default to allowing initiator operations. 6335 */ 6336 ahd->flags |= AHD_INITIATORROLE; 6337 6338 /* 6339 * Only allow target mode features if this unit has them enabled. 6340 */ 6341 if ((AHD_TMODE_ENABLE & (0x1 << ahd->unit)) == 0) 6342 ahd->features &= ~AHD_TARGETMODE; 6343 6344 #ifndef __linux__ 6345 /* DMA tag for mapping buffers into device visible space. */ 6346 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1, 6347 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 6348 /*lowaddr*/ahd->flags & AHD_39BIT_ADDRESSING 6349 ? (bus_addr_t)0x7FFFFFFFFFULL 6350 : BUS_SPACE_MAXADDR_32BIT, 6351 /*highaddr*/BUS_SPACE_MAXADDR, 6352 /*filter*/NULL, /*filterarg*/NULL, 6353 /*maxsize*/(AHD_NSEG - 1) * PAGE_SIZE, 6354 /*nsegments*/AHD_NSEG, 6355 /*maxsegsz*/AHD_MAXTRANSFER_SIZE, 6356 /*flags*/BUS_DMA_ALLOCNOW, 6357 &ahd->buffer_dmat) != 0) { 6358 return (ENOMEM); 6359 } 6360 #endif 6361 6362 ahd->init_level++; 6363 6364 /* 6365 * DMA tag for our command fifos and other data in system memory 6366 * the card's sequencer must be able to access. For initiator 6367 * roles, we need to allocate space for the qoutfifo. When providing 6368 * for the target mode role, we must additionally provide space for 6369 * the incoming target command fifo. 6370 */ 6371 driver_data_size = AHD_SCB_MAX * sizeof(*ahd->qoutfifo) 6372 + sizeof(struct hardware_scb); 6373 if ((ahd->features & AHD_TARGETMODE) != 0) 6374 driver_data_size += AHD_TMODE_CMDS * sizeof(struct target_cmd); 6375 if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) 6376 driver_data_size += PKT_OVERRUN_BUFSIZE; 6377 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1, 6378 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 6379 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 6380 /*highaddr*/BUS_SPACE_MAXADDR, 6381 /*filter*/NULL, /*filterarg*/NULL, 6382 driver_data_size, 6383 /*nsegments*/1, 6384 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 6385 /*flags*/0, &ahd->shared_data_dmat) != 0) { 6386 return (ENOMEM); 6387 } 6388 6389 ahd->init_level++; 6390 6391 /* Allocation of driver data */ 6392 if (aic_dmamem_alloc(ahd, ahd->shared_data_dmat, 6393 (void **)&ahd->shared_data_map.vaddr, 6394 BUS_DMA_NOWAIT | BUS_DMA_COHERENT, 6395 &ahd->shared_data_map.dmamap) != 0) { 6396 return (ENOMEM); 6397 } 6398 6399 ahd->init_level++; 6400 6401 /* And permanently map it in */ 6402 aic_dmamap_load(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap, 6403 ahd->shared_data_map.vaddr, driver_data_size, 6404 ahd_dmamap_cb, &ahd->shared_data_map.busaddr, 6405 /*flags*/0); 6406 ahd->qoutfifo = (struct ahd_completion *)ahd->shared_data_map.vaddr; 6407 next_vaddr = (uint8_t *)&ahd->qoutfifo[AHD_QOUT_SIZE]; 6408 next_baddr = ahd->shared_data_map.busaddr 6409 + AHD_QOUT_SIZE*sizeof(struct ahd_completion); 6410 if ((ahd->features & AHD_TARGETMODE) != 0) { 6411 ahd->targetcmds = (struct target_cmd *)next_vaddr; 6412 next_vaddr += AHD_TMODE_CMDS * sizeof(struct target_cmd); 6413 next_baddr += AHD_TMODE_CMDS * sizeof(struct target_cmd); 6414 } 6415 6416 if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) { 6417 ahd->overrun_buf = next_vaddr; 6418 next_vaddr += PKT_OVERRUN_BUFSIZE; 6419 next_baddr += PKT_OVERRUN_BUFSIZE; 6420 } 6421 6422 /* 6423 * We need one SCB to serve as the "next SCB". Since the 6424 * tag identifier in this SCB will never be used, there is 6425 * no point in using a valid HSCB tag from an SCB pulled from 6426 * the standard free pool. So, we allocate this "sentinel" 6427 * specially from the DMA safe memory chunk used for the QOUTFIFO. 6428 */ 6429 ahd->next_queued_hscb = (struct hardware_scb *)next_vaddr; 6430 ahd->next_queued_hscb_map = &ahd->shared_data_map; 6431 ahd->next_queued_hscb->hscb_busaddr = aic_htole32(next_baddr); 6432 6433 ahd->init_level++; 6434 6435 /* Allocate SCB data now that buffer_dmat is initialized */ 6436 if (ahd_init_scbdata(ahd) != 0) 6437 return (ENOMEM); 6438 6439 if ((ahd->flags & AHD_INITIATORROLE) == 0) 6440 ahd->flags &= ~AHD_RESET_BUS_A; 6441 6442 /* 6443 * Before committing these settings to the chip, give 6444 * the OSM one last chance to modify our configuration. 6445 */ 6446 ahd_platform_init(ahd); 6447 6448 /* Bring up the chip. */ 6449 ahd_chip_init(ahd); 6450 6451 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 6452 6453 if ((ahd->flags & AHD_CURRENT_SENSING) == 0) 6454 goto init_done; 6455 6456 /* 6457 * Verify termination based on current draw and 6458 * warn user if the bus is over/under terminated. 6459 */ 6460 error = ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 6461 CURSENSE_ENB); 6462 if (error != 0) { 6463 printf("%s: current sensing timeout 1\n", ahd_name(ahd)); 6464 goto init_done; 6465 } 6466 for (i = 20, fstat = FLX_FSTAT_BUSY; 6467 (fstat & FLX_FSTAT_BUSY) != 0 && i; i--) { 6468 error = ahd_read_flexport(ahd, FLXADDR_FLEXSTAT, &fstat); 6469 if (error != 0) { 6470 printf("%s: current sensing timeout 2\n", 6471 ahd_name(ahd)); 6472 goto init_done; 6473 } 6474 } 6475 if (i == 0) { 6476 printf("%s: Timedout during current-sensing test\n", 6477 ahd_name(ahd)); 6478 goto init_done; 6479 } 6480 6481 /* Latch Current Sensing status. */ 6482 error = ahd_read_flexport(ahd, FLXADDR_CURRENT_STAT, ¤t_sensing); 6483 if (error != 0) { 6484 printf("%s: current sensing timeout 3\n", ahd_name(ahd)); 6485 goto init_done; 6486 } 6487 6488 /* Diable current sensing. */ 6489 ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 0); 6490 6491 #ifdef AHD_DEBUG 6492 if ((ahd_debug & AHD_SHOW_TERMCTL) != 0) { 6493 printf("%s: current_sensing == 0x%x\n", 6494 ahd_name(ahd), current_sensing); 6495 } 6496 #endif 6497 warn_user = 0; 6498 for (i = 0; i < 4; i++, current_sensing >>= FLX_CSTAT_SHIFT) { 6499 u_int term_stat; 6500 6501 term_stat = (current_sensing & FLX_CSTAT_MASK); 6502 switch (term_stat) { 6503 case FLX_CSTAT_OVER: 6504 case FLX_CSTAT_UNDER: 6505 warn_user++; 6506 case FLX_CSTAT_INVALID: 6507 case FLX_CSTAT_OKAY: 6508 if (warn_user == 0 && bootverbose == 0) 6509 break; 6510 printf("%s: %s Channel %s\n", ahd_name(ahd), 6511 channel_strings[i], termstat_strings[term_stat]); 6512 break; 6513 } 6514 } 6515 if (warn_user) { 6516 printf("%s: WARNING. Termination is not configured correctly.\n" 6517 "%s: WARNING. SCSI bus operations may FAIL.\n", 6518 ahd_name(ahd), ahd_name(ahd)); 6519 AHD_CORRECTABLE_ERROR(ahd); 6520 } 6521 init_done: 6522 ahd_restart(ahd); 6523 aic_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_MS, 6524 ahd_stat_timer, ahd); 6525 return (0); 6526 } 6527 6528 /* 6529 * (Re)initialize chip state after a chip reset. 6530 */ 6531 static void 6532 ahd_chip_init(struct ahd_softc *ahd) 6533 { 6534 uint32_t busaddr; 6535 u_int sxfrctl1; 6536 u_int scsiseq_template; 6537 u_int wait; 6538 u_int i; 6539 u_int target; 6540 6541 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6542 /* 6543 * Take the LED out of diagnostic mode 6544 */ 6545 ahd_outb(ahd, SBLKCTL, ahd_inb(ahd, SBLKCTL) & ~(DIAGLEDEN|DIAGLEDON)); 6546 6547 /* 6548 * Return HS_MAILBOX to its default value. 6549 */ 6550 ahd->hs_mailbox = 0; 6551 ahd_outb(ahd, HS_MAILBOX, 0); 6552 6553 /* Set the SCSI Id, SXFRCTL0, SXFRCTL1, and SIMODE1. */ 6554 ahd_outb(ahd, IOWNID, ahd->our_id); 6555 ahd_outb(ahd, TOWNID, ahd->our_id); 6556 sxfrctl1 = (ahd->flags & AHD_TERM_ENB_A) != 0 ? STPWEN : 0; 6557 sxfrctl1 |= (ahd->flags & AHD_SPCHK_ENB_A) != 0 ? ENSPCHK : 0; 6558 if ((ahd->bugs & AHD_LONG_SETIMO_BUG) 6559 && (ahd->seltime != STIMESEL_MIN)) { 6560 /* 6561 * The selection timer duration is twice as long 6562 * as it should be. Halve it by adding "1" to 6563 * the user specified setting. 6564 */ 6565 sxfrctl1 |= ahd->seltime + STIMESEL_BUG_ADJ; 6566 } else { 6567 sxfrctl1 |= ahd->seltime; 6568 } 6569 6570 ahd_outb(ahd, SXFRCTL0, DFON); 6571 ahd_outb(ahd, SXFRCTL1, sxfrctl1|ahd->seltime|ENSTIMER|ACTNEGEN); 6572 ahd_outb(ahd, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR); 6573 6574 /* 6575 * Now that termination is set, wait for up 6576 * to 500ms for our transceivers to settle. If 6577 * the adapter does not have a cable attached, 6578 * the transceivers may never settle, so don't 6579 * complain if we fail here. 6580 */ 6581 for (wait = 10000; 6582 (ahd_inb(ahd, SBLKCTL) & (ENAB40|ENAB20)) == 0 && wait; 6583 wait--) 6584 aic_delay(100); 6585 6586 /* Clear any false bus resets due to the transceivers settling */ 6587 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI); 6588 ahd_outb(ahd, CLRINT, CLRSCSIINT); 6589 6590 /* Initialize mode specific S/G state. */ 6591 for (i = 0; i < 2; i++) { 6592 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i); 6593 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 6594 ahd_outb(ahd, SG_STATE, 0); 6595 ahd_outb(ahd, CLRSEQINTSRC, 0xFF); 6596 ahd_outb(ahd, SEQIMODE, 6597 ENSAVEPTRS|ENCFG4DATA|ENCFG4ISTAT 6598 |ENCFG4TSTAT|ENCFG4ICMD|ENCFG4TCMD); 6599 } 6600 6601 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 6602 ahd_outb(ahd, DSCOMMAND0, ahd_inb(ahd, DSCOMMAND0)|MPARCKEN|CACHETHEN); 6603 ahd_outb(ahd, DFF_THRSH, RD_DFTHRSH_75|WR_DFTHRSH_75); 6604 ahd_outb(ahd, SIMODE0, ENIOERR|ENOVERRUN); 6605 ahd_outb(ahd, SIMODE3, ENNTRAMPERR|ENOSRAMPERR); 6606 if ((ahd->bugs & AHD_BUSFREEREV_BUG) != 0) { 6607 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|AUTO_MSGOUT_DE); 6608 } else { 6609 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|BUSFREEREV|AUTO_MSGOUT_DE); 6610 } 6611 ahd_outb(ahd, SCSCHKN, CURRFIFODEF|WIDERESEN|SHVALIDSTDIS); 6612 if ((ahd->chip & AHD_BUS_MASK) == AHD_PCIX) 6613 /* 6614 * Do not issue a target abort when a split completion 6615 * error occurs. Let our PCIX interrupt handler deal 6616 * with it instead. H2A4 Razor #625 6617 */ 6618 ahd_outb(ahd, PCIXCTL, ahd_inb(ahd, PCIXCTL) | SPLTSTADIS); 6619 6620 if ((ahd->bugs & AHD_LQOOVERRUN_BUG) != 0) 6621 ahd_outb(ahd, LQOSCSCTL, LQONOCHKOVER); 6622 6623 /* 6624 * Tweak IOCELL settings. 6625 */ 6626 if ((ahd->flags & AHD_HP_BOARD) != 0) { 6627 for (i = 0; i < NUMDSPS; i++) { 6628 ahd_outb(ahd, DSPSELECT, i); 6629 ahd_outb(ahd, WRTBIASCTL, WRTBIASCTL_HP_DEFAULT); 6630 } 6631 #ifdef AHD_DEBUG 6632 if ((ahd_debug & AHD_SHOW_MISC) != 0) 6633 printf("%s: WRTBIASCTL now 0x%x\n", ahd_name(ahd), 6634 WRTBIASCTL_HP_DEFAULT); 6635 #endif 6636 } 6637 ahd_setup_iocell_workaround(ahd); 6638 6639 /* 6640 * Enable LQI Manager interrupts. 6641 */ 6642 ahd_outb(ahd, LQIMODE1, ENLQIPHASE_LQ|ENLQIPHASE_NLQ|ENLIQABORT 6643 | ENLQICRCI_LQ|ENLQICRCI_NLQ|ENLQIBADLQI 6644 | ENLQIOVERI_LQ|ENLQIOVERI_NLQ); 6645 ahd_outb(ahd, LQOMODE0, ENLQOATNLQ|ENLQOATNPKT|ENLQOTCRC); 6646 /* 6647 * We choose to have the sequencer catch LQOPHCHGINPKT errors 6648 * manually for the command phase at the start of a packetized 6649 * selection case. ENLQOBUSFREE should be made redundant by 6650 * the BUSFREE interrupt, but it seems that some LQOBUSFREE 6651 * events fail to assert the BUSFREE interrupt so we must 6652 * also enable LQOBUSFREE interrupts. 6653 */ 6654 ahd_outb(ahd, LQOMODE1, ENLQOBUSFREE); 6655 6656 /* 6657 * Setup sequencer interrupt handlers. 6658 */ 6659 ahd_outw(ahd, INTVEC1_ADDR, ahd_resolve_seqaddr(ahd, LABEL_seq_isr)); 6660 ahd_outw(ahd, INTVEC2_ADDR, ahd_resolve_seqaddr(ahd, LABEL_timer_isr)); 6661 6662 /* 6663 * Setup SCB Offset registers. 6664 */ 6665 if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) { 6666 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb, 6667 pkt_long_lun)); 6668 } else { 6669 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb, lun)); 6670 } 6671 ahd_outb(ahd, CMDLENPTR, offsetof(struct hardware_scb, cdb_len)); 6672 ahd_outb(ahd, ATTRPTR, offsetof(struct hardware_scb, task_attribute)); 6673 ahd_outb(ahd, FLAGPTR, offsetof(struct hardware_scb, task_management)); 6674 ahd_outb(ahd, CMDPTR, offsetof(struct hardware_scb, 6675 shared_data.idata.cdb)); 6676 ahd_outb(ahd, QNEXTPTR, 6677 offsetof(struct hardware_scb, next_hscb_busaddr)); 6678 ahd_outb(ahd, ABRTBITPTR, MK_MESSAGE_BIT_OFFSET); 6679 ahd_outb(ahd, ABRTBYTEPTR, offsetof(struct hardware_scb, control)); 6680 if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) { 6681 ahd_outb(ahd, LUNLEN, 6682 sizeof(ahd->next_queued_hscb->pkt_long_lun) - 1); 6683 } else { 6684 ahd_outb(ahd, LUNLEN, LUNLEN_SINGLE_LEVEL_LUN); 6685 } 6686 ahd_outb(ahd, CDBLIMIT, SCB_CDB_LEN_PTR - 1); 6687 ahd_outb(ahd, MAXCMD, 0xFF); 6688 ahd_outb(ahd, SCBAUTOPTR, 6689 AUSCBPTR_EN | offsetof(struct hardware_scb, tag)); 6690 6691 /* We haven't been enabled for target mode yet. */ 6692 ahd_outb(ahd, MULTARGID, 0); 6693 ahd_outb(ahd, MULTARGID + 1, 0); 6694 6695 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6696 /* Initialize the negotiation table. */ 6697 if ((ahd->features & AHD_NEW_IOCELL_OPTS) == 0) { 6698 /* 6699 * Clear the spare bytes in the neg table to avoid 6700 * spurious parity errors. 6701 */ 6702 for (target = 0; target < AHD_NUM_TARGETS; target++) { 6703 ahd_outb(ahd, NEGOADDR, target); 6704 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PER_DEV0); 6705 for (i = 0; i < AHD_NUM_PER_DEV_ANNEXCOLS; i++) 6706 ahd_outb(ahd, ANNEXDAT, 0); 6707 } 6708 } 6709 for (target = 0; target < AHD_NUM_TARGETS; target++) { 6710 struct ahd_devinfo devinfo; 6711 struct ahd_initiator_tinfo *tinfo; 6712 struct ahd_tmode_tstate *tstate; 6713 6714 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 6715 target, &tstate); 6716 ahd_compile_devinfo(&devinfo, ahd->our_id, 6717 target, CAM_LUN_WILDCARD, 6718 'A', ROLE_INITIATOR); 6719 ahd_update_neg_table(ahd, &devinfo, &tinfo->curr); 6720 } 6721 6722 ahd_outb(ahd, CLRSINT3, NTRAMPERR|OSRAMPERR); 6723 ahd_outb(ahd, CLRINT, CLRSCSIINT); 6724 6725 #ifdef NEEDS_MORE_TESTING 6726 /* 6727 * Always enable abort on incoming L_Qs if this feature is 6728 * supported. We use this to catch invalid SCB references. 6729 */ 6730 if ((ahd->bugs & AHD_ABORT_LQI_BUG) == 0) 6731 ahd_outb(ahd, LQCTL1, ABORTPENDING); 6732 else 6733 #endif 6734 ahd_outb(ahd, LQCTL1, 0); 6735 6736 /* All of our queues are empty */ 6737 ahd->qoutfifonext = 0; 6738 ahd->qoutfifonext_valid_tag = QOUTFIFO_ENTRY_VALID; 6739 ahd_outb(ahd, QOUTFIFO_ENTRY_VALID_TAG, QOUTFIFO_ENTRY_VALID); 6740 for (i = 0; i < AHD_QOUT_SIZE; i++) 6741 ahd->qoutfifo[i].valid_tag = 0; 6742 ahd_sync_qoutfifo(ahd, BUS_DMASYNC_PREREAD); 6743 6744 ahd->qinfifonext = 0; 6745 for (i = 0; i < AHD_QIN_SIZE; i++) 6746 ahd->qinfifo[i] = SCB_LIST_NULL; 6747 6748 if ((ahd->features & AHD_TARGETMODE) != 0) { 6749 /* All target command blocks start out invalid. */ 6750 for (i = 0; i < AHD_TMODE_CMDS; i++) 6751 ahd->targetcmds[i].cmd_valid = 0; 6752 ahd_sync_tqinfifo(ahd, BUS_DMASYNC_PREREAD); 6753 ahd->tqinfifonext = 1; 6754 ahd_outb(ahd, KERNEL_TQINPOS, ahd->tqinfifonext - 1); 6755 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext); 6756 } 6757 6758 /* Initialize Scratch Ram. */ 6759 ahd_outb(ahd, SEQ_FLAGS, 0); 6760 ahd_outb(ahd, SEQ_FLAGS2, 0); 6761 6762 /* We don't have any waiting selections */ 6763 ahd_outw(ahd, WAITING_TID_HEAD, SCB_LIST_NULL); 6764 ahd_outw(ahd, WAITING_TID_TAIL, SCB_LIST_NULL); 6765 ahd_outw(ahd, MK_MESSAGE_SCB, SCB_LIST_NULL); 6766 ahd_outw(ahd, MK_MESSAGE_SCSIID, 0xFF); 6767 for (i = 0; i < AHD_NUM_TARGETS; i++) 6768 ahd_outw(ahd, WAITING_SCB_TAILS + (2 * i), SCB_LIST_NULL); 6769 6770 /* 6771 * Nobody is waiting to be DMAed into the QOUTFIFO. 6772 */ 6773 ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL); 6774 ahd_outw(ahd, COMPLETE_SCB_DMAINPROG_HEAD, SCB_LIST_NULL); 6775 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL); 6776 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, SCB_LIST_NULL); 6777 ahd_outw(ahd, COMPLETE_ON_QFREEZE_HEAD, SCB_LIST_NULL); 6778 6779 /* 6780 * The Freeze Count is 0. 6781 */ 6782 ahd->qfreeze_cnt = 0; 6783 ahd_outw(ahd, QFREEZE_COUNT, 0); 6784 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, 0); 6785 6786 /* 6787 * Tell the sequencer where it can find our arrays in memory. 6788 */ 6789 busaddr = ahd->shared_data_map.busaddr; 6790 ahd_outl(ahd, SHARED_DATA_ADDR, busaddr); 6791 ahd_outl(ahd, QOUTFIFO_NEXT_ADDR, busaddr); 6792 6793 /* 6794 * Setup the allowed SCSI Sequences based on operational mode. 6795 * If we are a target, we'll enable select in operations once 6796 * we've had a lun enabled. 6797 */ 6798 scsiseq_template = ENAUTOATNP; 6799 if ((ahd->flags & AHD_INITIATORROLE) != 0) 6800 scsiseq_template |= ENRSELI; 6801 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq_template); 6802 6803 /* There are no busy SCBs yet. */ 6804 for (target = 0; target < AHD_NUM_TARGETS; target++) { 6805 int lun; 6806 6807 for (lun = 0; lun < AHD_NUM_LUNS_NONPKT; lun++) 6808 ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(target, 'A', lun)); 6809 } 6810 6811 /* 6812 * Initialize the group code to command length table. 6813 * Vendor Unique codes are set to 0 so we only capture 6814 * the first byte of the cdb. These can be overridden 6815 * when target mode is enabled. 6816 */ 6817 ahd_outb(ahd, CMDSIZE_TABLE, 5); 6818 ahd_outb(ahd, CMDSIZE_TABLE + 1, 9); 6819 ahd_outb(ahd, CMDSIZE_TABLE + 2, 9); 6820 ahd_outb(ahd, CMDSIZE_TABLE + 3, 0); 6821 ahd_outb(ahd, CMDSIZE_TABLE + 4, 15); 6822 ahd_outb(ahd, CMDSIZE_TABLE + 5, 11); 6823 ahd_outb(ahd, CMDSIZE_TABLE + 6, 0); 6824 ahd_outb(ahd, CMDSIZE_TABLE + 7, 0); 6825 6826 /* Tell the sequencer of our initial queue positions */ 6827 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 6828 ahd_outb(ahd, QOFF_CTLSTA, SCB_QSIZE_512); 6829 ahd->qinfifonext = 0; 6830 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 6831 ahd_set_hescb_qoff(ahd, 0); 6832 ahd_set_snscb_qoff(ahd, 0); 6833 ahd_set_sescb_qoff(ahd, 0); 6834 ahd_set_sdscb_qoff(ahd, 0); 6835 6836 /* 6837 * Tell the sequencer which SCB will be the next one it receives. 6838 */ 6839 busaddr = aic_le32toh(ahd->next_queued_hscb->hscb_busaddr); 6840 ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr); 6841 6842 /* 6843 * Default to coalescing disabled. 6844 */ 6845 ahd_outw(ahd, INT_COALESCING_CMDCOUNT, 0); 6846 ahd_outw(ahd, CMDS_PENDING, 0); 6847 ahd_update_coalescing_values(ahd, ahd->int_coalescing_timer, 6848 ahd->int_coalescing_maxcmds, 6849 ahd->int_coalescing_mincmds); 6850 ahd_enable_coalescing(ahd, FALSE); 6851 6852 ahd_loadseq(ahd); 6853 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6854 } 6855 6856 /* 6857 * Setup default device and controller settings. 6858 * This should only be called if our probe has 6859 * determined that no configuration data is available. 6860 */ 6861 int 6862 ahd_default_config(struct ahd_softc *ahd) 6863 { 6864 int targ; 6865 6866 ahd->our_id = 7; 6867 6868 /* 6869 * Allocate a tstate to house information for our 6870 * initiator presence on the bus as well as the user 6871 * data for any target mode initiator. 6872 */ 6873 if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) { 6874 printf("%s: unable to allocate ahd_tmode_tstate. " 6875 "Failing attach\n", ahd_name(ahd)); 6876 AHD_FATAL_ERROR(ahd); 6877 return (ENOMEM); 6878 } 6879 6880 for (targ = 0; targ < AHD_NUM_TARGETS; targ++) { 6881 struct ahd_devinfo devinfo; 6882 struct ahd_initiator_tinfo *tinfo; 6883 struct ahd_tmode_tstate *tstate; 6884 uint16_t target_mask; 6885 6886 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 6887 targ, &tstate); 6888 /* 6889 * We support SPC2 and SPI4. 6890 */ 6891 tinfo->user.protocol_version = 4; 6892 tinfo->user.transport_version = 4; 6893 6894 target_mask = 0x01 << targ; 6895 ahd->user_discenable |= target_mask; 6896 tstate->discenable |= target_mask; 6897 ahd->user_tagenable |= target_mask; 6898 #ifdef AHD_FORCE_160 6899 tinfo->user.period = AHD_SYNCRATE_DT; 6900 #else 6901 tinfo->user.period = AHD_SYNCRATE_160; 6902 #endif 6903 tinfo->user.offset = MAX_OFFSET; 6904 tinfo->user.ppr_options = MSG_EXT_PPR_RD_STRM 6905 | MSG_EXT_PPR_WR_FLOW 6906 | MSG_EXT_PPR_HOLD_MCS 6907 | MSG_EXT_PPR_IU_REQ 6908 | MSG_EXT_PPR_QAS_REQ 6909 | MSG_EXT_PPR_DT_REQ; 6910 if ((ahd->features & AHD_RTI) != 0) 6911 tinfo->user.ppr_options |= MSG_EXT_PPR_RTI; 6912 6913 tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT; 6914 6915 /* 6916 * Start out Async/Narrow/Untagged and with 6917 * conservative protocol support. 6918 */ 6919 tinfo->goal.protocol_version = 2; 6920 tinfo->goal.transport_version = 2; 6921 tinfo->curr.protocol_version = 2; 6922 tinfo->curr.transport_version = 2; 6923 ahd_compile_devinfo(&devinfo, ahd->our_id, 6924 targ, CAM_LUN_WILDCARD, 6925 'A', ROLE_INITIATOR); 6926 tstate->tagenable &= ~target_mask; 6927 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 6928 AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE); 6929 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0, 6930 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL, 6931 /*paused*/TRUE); 6932 } 6933 return (0); 6934 } 6935 6936 /* 6937 * Parse device configuration information. 6938 */ 6939 int 6940 ahd_parse_cfgdata(struct ahd_softc *ahd, struct seeprom_config *sc) 6941 { 6942 int targ; 6943 int max_targ; 6944 6945 max_targ = sc->max_targets & CFMAXTARG; 6946 ahd->our_id = sc->brtime_id & CFSCSIID; 6947 6948 /* 6949 * Allocate a tstate to house information for our 6950 * initiator presence on the bus as well as the user 6951 * data for any target mode initiator. 6952 */ 6953 if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) { 6954 printf("%s: unable to allocate ahd_tmode_tstate. " 6955 "Failing attach\n", ahd_name(ahd)); 6956 AHD_FATAL_ERROR(ahd); 6957 return (ENOMEM); 6958 } 6959 6960 for (targ = 0; targ < max_targ; targ++) { 6961 struct ahd_devinfo devinfo; 6962 struct ahd_initiator_tinfo *tinfo; 6963 struct ahd_transinfo *user_tinfo; 6964 struct ahd_tmode_tstate *tstate; 6965 uint16_t target_mask; 6966 6967 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 6968 targ, &tstate); 6969 user_tinfo = &tinfo->user; 6970 6971 /* 6972 * We support SPC2 and SPI4. 6973 */ 6974 tinfo->user.protocol_version = 4; 6975 tinfo->user.transport_version = 4; 6976 6977 target_mask = 0x01 << targ; 6978 ahd->user_discenable &= ~target_mask; 6979 tstate->discenable &= ~target_mask; 6980 ahd->user_tagenable &= ~target_mask; 6981 if (sc->device_flags[targ] & CFDISC) { 6982 tstate->discenable |= target_mask; 6983 ahd->user_discenable |= target_mask; 6984 ahd->user_tagenable |= target_mask; 6985 } else { 6986 /* 6987 * Cannot be packetized without disconnection. 6988 */ 6989 sc->device_flags[targ] &= ~CFPACKETIZED; 6990 } 6991 6992 user_tinfo->ppr_options = 0; 6993 user_tinfo->period = (sc->device_flags[targ] & CFXFER); 6994 if (user_tinfo->period < CFXFER_ASYNC) { 6995 if (user_tinfo->period <= AHD_PERIOD_10MHz) 6996 user_tinfo->ppr_options |= MSG_EXT_PPR_DT_REQ; 6997 user_tinfo->offset = MAX_OFFSET; 6998 } else { 6999 user_tinfo->offset = 0; 7000 user_tinfo->period = AHD_ASYNC_XFER_PERIOD; 7001 } 7002 #ifdef AHD_FORCE_160 7003 if (user_tinfo->period <= AHD_SYNCRATE_160) 7004 user_tinfo->period = AHD_SYNCRATE_DT; 7005 #endif 7006 7007 if ((sc->device_flags[targ] & CFPACKETIZED) != 0) { 7008 user_tinfo->ppr_options |= MSG_EXT_PPR_RD_STRM 7009 | MSG_EXT_PPR_WR_FLOW 7010 | MSG_EXT_PPR_HOLD_MCS 7011 | MSG_EXT_PPR_IU_REQ; 7012 if ((ahd->features & AHD_RTI) != 0) 7013 user_tinfo->ppr_options |= MSG_EXT_PPR_RTI; 7014 } 7015 7016 if ((sc->device_flags[targ] & CFQAS) != 0) 7017 user_tinfo->ppr_options |= MSG_EXT_PPR_QAS_REQ; 7018 7019 if ((sc->device_flags[targ] & CFWIDEB) != 0) 7020 user_tinfo->width = MSG_EXT_WDTR_BUS_16_BIT; 7021 else 7022 user_tinfo->width = MSG_EXT_WDTR_BUS_8_BIT; 7023 #ifdef AHD_DEBUG 7024 if ((ahd_debug & AHD_SHOW_MISC) != 0) 7025 printf("(%d): %x:%x:%x:%x\n", targ, user_tinfo->width, 7026 user_tinfo->period, user_tinfo->offset, 7027 user_tinfo->ppr_options); 7028 #endif 7029 /* 7030 * Start out Async/Narrow/Untagged and with 7031 * conservative protocol support. 7032 */ 7033 tstate->tagenable &= ~target_mask; 7034 tinfo->goal.protocol_version = 2; 7035 tinfo->goal.transport_version = 2; 7036 tinfo->curr.protocol_version = 2; 7037 tinfo->curr.transport_version = 2; 7038 ahd_compile_devinfo(&devinfo, ahd->our_id, 7039 targ, CAM_LUN_WILDCARD, 7040 'A', ROLE_INITIATOR); 7041 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 7042 AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE); 7043 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0, 7044 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL, 7045 /*paused*/TRUE); 7046 } 7047 7048 ahd->flags &= ~AHD_SPCHK_ENB_A; 7049 if (sc->bios_control & CFSPARITY) 7050 ahd->flags |= AHD_SPCHK_ENB_A; 7051 7052 ahd->flags &= ~AHD_RESET_BUS_A; 7053 if (sc->bios_control & CFRESETB) 7054 ahd->flags |= AHD_RESET_BUS_A; 7055 7056 ahd->flags &= ~AHD_EXTENDED_TRANS_A; 7057 if (sc->bios_control & CFEXTEND) 7058 ahd->flags |= AHD_EXTENDED_TRANS_A; 7059 7060 ahd->flags &= ~AHD_BIOS_ENABLED; 7061 if ((sc->bios_control & CFBIOSSTATE) == CFBS_ENABLED) 7062 ahd->flags |= AHD_BIOS_ENABLED; 7063 7064 ahd->flags &= ~AHD_STPWLEVEL_A; 7065 if ((sc->adapter_control & CFSTPWLEVEL) != 0) 7066 ahd->flags |= AHD_STPWLEVEL_A; 7067 7068 return (0); 7069 } 7070 7071 /* 7072 * Parse device configuration information. 7073 */ 7074 int 7075 ahd_parse_vpddata(struct ahd_softc *ahd, struct vpd_config *vpd) 7076 { 7077 int error; 7078 7079 error = ahd_verify_vpd_cksum(vpd); 7080 if (error == 0) 7081 return (EINVAL); 7082 if ((vpd->bios_flags & VPDBOOTHOST) != 0) 7083 ahd->flags |= AHD_BOOT_CHANNEL; 7084 return (0); 7085 } 7086 7087 void 7088 ahd_intr_enable(struct ahd_softc *ahd, int enable) 7089 { 7090 u_int hcntrl; 7091 7092 hcntrl = ahd_inb(ahd, HCNTRL); 7093 hcntrl &= ~INTEN; 7094 ahd->pause &= ~INTEN; 7095 ahd->unpause &= ~INTEN; 7096 if (enable) { 7097 hcntrl |= INTEN; 7098 ahd->pause |= INTEN; 7099 ahd->unpause |= INTEN; 7100 } 7101 ahd_outb(ahd, HCNTRL, hcntrl); 7102 } 7103 7104 void 7105 ahd_update_coalescing_values(struct ahd_softc *ahd, u_int timer, u_int maxcmds, 7106 u_int mincmds) 7107 { 7108 if (timer > AHD_TIMER_MAX_US) 7109 timer = AHD_TIMER_MAX_US; 7110 ahd->int_coalescing_timer = timer; 7111 7112 if (maxcmds > AHD_INT_COALESCING_MAXCMDS_MAX) 7113 maxcmds = AHD_INT_COALESCING_MAXCMDS_MAX; 7114 if (mincmds > AHD_INT_COALESCING_MINCMDS_MAX) 7115 mincmds = AHD_INT_COALESCING_MINCMDS_MAX; 7116 ahd->int_coalescing_maxcmds = maxcmds; 7117 ahd_outw(ahd, INT_COALESCING_TIMER, timer / AHD_TIMER_US_PER_TICK); 7118 ahd_outb(ahd, INT_COALESCING_MAXCMDS, -maxcmds); 7119 ahd_outb(ahd, INT_COALESCING_MINCMDS, -mincmds); 7120 } 7121 7122 void 7123 ahd_enable_coalescing(struct ahd_softc *ahd, int enable) 7124 { 7125 7126 ahd->hs_mailbox &= ~ENINT_COALESCE; 7127 if (enable) 7128 ahd->hs_mailbox |= ENINT_COALESCE; 7129 ahd_outb(ahd, HS_MAILBOX, ahd->hs_mailbox); 7130 ahd_flush_device_writes(ahd); 7131 ahd_run_qoutfifo(ahd); 7132 } 7133 7134 /* 7135 * Ensure that the card is paused in a location 7136 * outside of all critical sections and that all 7137 * pending work is completed prior to returning. 7138 * This routine should only be called from outside 7139 * an interrupt context. 7140 */ 7141 void 7142 ahd_pause_and_flushwork(struct ahd_softc *ahd) 7143 { 7144 u_int intstat; 7145 u_int maxloops; 7146 7147 maxloops = 1000; 7148 ahd->flags |= AHD_ALL_INTERRUPTS; 7149 ahd_pause(ahd); 7150 /* 7151 * Freeze the outgoing selections. We do this only 7152 * until we are safely paused without further selections 7153 * pending. 7154 */ 7155 ahd->qfreeze_cnt--; 7156 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt); 7157 ahd_outb(ahd, SEQ_FLAGS2, ahd_inb(ahd, SEQ_FLAGS2) | SELECTOUT_QFROZEN); 7158 do { 7159 7160 ahd_unpause(ahd); 7161 /* 7162 * Give the sequencer some time to service 7163 * any active selections. 7164 */ 7165 aic_delay(500); 7166 7167 ahd_intr(ahd); 7168 ahd_pause(ahd); 7169 intstat = ahd_inb(ahd, INTSTAT); 7170 if ((intstat & INT_PEND) == 0) { 7171 ahd_clear_critical_section(ahd); 7172 intstat = ahd_inb(ahd, INTSTAT); 7173 } 7174 } while (--maxloops 7175 && (intstat != 0xFF || (ahd->features & AHD_REMOVABLE) == 0) 7176 && ((intstat & INT_PEND) != 0 7177 || (ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0 7178 || (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) != 0)); 7179 7180 if (maxloops == 0) { 7181 printf("Infinite interrupt loop, INTSTAT = %x", 7182 ahd_inb(ahd, INTSTAT)); 7183 AHD_FATAL_ERROR(ahd); 7184 } 7185 ahd->qfreeze_cnt++; 7186 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt); 7187 7188 ahd_flush_qoutfifo(ahd); 7189 7190 ahd_platform_flushwork(ahd); 7191 ahd->flags &= ~AHD_ALL_INTERRUPTS; 7192 } 7193 7194 int 7195 ahd_suspend(struct ahd_softc *ahd) 7196 { 7197 7198 ahd_pause_and_flushwork(ahd); 7199 7200 if (LIST_FIRST(&ahd->pending_scbs) != NULL) { 7201 ahd_unpause(ahd); 7202 return (EBUSY); 7203 } 7204 ahd_shutdown(ahd); 7205 return (0); 7206 } 7207 7208 int 7209 ahd_resume(struct ahd_softc *ahd) 7210 { 7211 7212 ahd_reset(ahd, /*reinit*/TRUE); 7213 ahd_intr_enable(ahd, TRUE); 7214 ahd_restart(ahd); 7215 return (0); 7216 } 7217 7218 /************************** Busy Target Table *********************************/ 7219 /* 7220 * Set SCBPTR to the SCB that contains the busy 7221 * table entry for TCL. Return the offset into 7222 * the SCB that contains the entry for TCL. 7223 * saved_scbid is dereferenced and set to the 7224 * scbid that should be restored once manipualtion 7225 * of the TCL entry is complete. 7226 */ 7227 static __inline u_int 7228 ahd_index_busy_tcl(struct ahd_softc *ahd, u_int *saved_scbid, u_int tcl) 7229 { 7230 /* 7231 * Index to the SCB that contains the busy entry. 7232 */ 7233 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7234 *saved_scbid = ahd_get_scbptr(ahd); 7235 ahd_set_scbptr(ahd, TCL_LUN(tcl) 7236 | ((TCL_TARGET_OFFSET(tcl) & 0xC) << 4)); 7237 7238 /* 7239 * And now calculate the SCB offset to the entry. 7240 * Each entry is 2 bytes wide, hence the 7241 * multiplication by 2. 7242 */ 7243 return (((TCL_TARGET_OFFSET(tcl) & 0x3) << 1) + SCB_DISCONNECTED_LISTS); 7244 } 7245 7246 /* 7247 * Return the untagged transaction id for a given target/channel lun. 7248 */ 7249 u_int 7250 ahd_find_busy_tcl(struct ahd_softc *ahd, u_int tcl) 7251 { 7252 u_int scbid; 7253 u_int scb_offset; 7254 u_int saved_scbptr; 7255 7256 scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl); 7257 scbid = ahd_inw_scbram(ahd, scb_offset); 7258 ahd_set_scbptr(ahd, saved_scbptr); 7259 return (scbid); 7260 } 7261 7262 void 7263 ahd_busy_tcl(struct ahd_softc *ahd, u_int tcl, u_int scbid) 7264 { 7265 u_int scb_offset; 7266 u_int saved_scbptr; 7267 7268 scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl); 7269 ahd_outw(ahd, scb_offset, scbid); 7270 ahd_set_scbptr(ahd, saved_scbptr); 7271 } 7272 7273 /************************** SCB and SCB queue management **********************/ 7274 int 7275 ahd_match_scb(struct ahd_softc *ahd, struct scb *scb, int target, 7276 char channel, int lun, u_int tag, role_t role) 7277 { 7278 int targ = SCB_GET_TARGET(ahd, scb); 7279 char chan = SCB_GET_CHANNEL(ahd, scb); 7280 int slun = SCB_GET_LUN(scb); 7281 int match; 7282 7283 match = ((chan == channel) || (channel == ALL_CHANNELS)); 7284 if (match != 0) 7285 match = ((targ == target) || (target == CAM_TARGET_WILDCARD)); 7286 if (match != 0) 7287 match = ((lun == slun) || (lun == CAM_LUN_WILDCARD)); 7288 if (match != 0) { 7289 #ifdef AHD_TARGET_MODE 7290 int group; 7291 7292 group = XPT_FC_GROUP(scb->io_ctx->ccb_h.func_code); 7293 if (role == ROLE_INITIATOR) { 7294 match = (group != XPT_FC_GROUP_TMODE) 7295 && ((tag == SCB_GET_TAG(scb)) 7296 || (tag == SCB_LIST_NULL)); 7297 } else if (role == ROLE_TARGET) { 7298 match = (group == XPT_FC_GROUP_TMODE) 7299 && ((tag == scb->io_ctx->csio.tag_id) 7300 || (tag == SCB_LIST_NULL)); 7301 } 7302 #else /* !AHD_TARGET_MODE */ 7303 match = ((tag == SCB_GET_TAG(scb)) || (tag == SCB_LIST_NULL)); 7304 #endif /* AHD_TARGET_MODE */ 7305 } 7306 7307 return match; 7308 } 7309 7310 void 7311 ahd_freeze_devq(struct ahd_softc *ahd, struct scb *scb) 7312 { 7313 int target; 7314 char channel; 7315 int lun; 7316 7317 target = SCB_GET_TARGET(ahd, scb); 7318 lun = SCB_GET_LUN(scb); 7319 channel = SCB_GET_CHANNEL(ahd, scb); 7320 7321 ahd_search_qinfifo(ahd, target, channel, lun, 7322 /*tag*/SCB_LIST_NULL, ROLE_UNKNOWN, 7323 CAM_REQUEUE_REQ, SEARCH_COMPLETE); 7324 7325 ahd_platform_freeze_devq(ahd, scb); 7326 } 7327 7328 void 7329 ahd_qinfifo_requeue_tail(struct ahd_softc *ahd, struct scb *scb) 7330 { 7331 struct scb *prev_scb; 7332 ahd_mode_state saved_modes; 7333 7334 saved_modes = ahd_save_modes(ahd); 7335 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 7336 prev_scb = NULL; 7337 if (ahd_qinfifo_count(ahd) != 0) { 7338 u_int prev_tag; 7339 u_int prev_pos; 7340 7341 prev_pos = AHD_QIN_WRAP(ahd->qinfifonext - 1); 7342 prev_tag = ahd->qinfifo[prev_pos]; 7343 prev_scb = ahd_lookup_scb(ahd, prev_tag); 7344 } 7345 ahd_qinfifo_requeue(ahd, prev_scb, scb); 7346 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 7347 ahd_restore_modes(ahd, saved_modes); 7348 } 7349 7350 static void 7351 ahd_qinfifo_requeue(struct ahd_softc *ahd, struct scb *prev_scb, 7352 struct scb *scb) 7353 { 7354 if (prev_scb == NULL) { 7355 uint32_t busaddr; 7356 7357 busaddr = aic_le32toh(scb->hscb->hscb_busaddr); 7358 ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr); 7359 } else { 7360 prev_scb->hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr; 7361 ahd_sync_scb(ahd, prev_scb, 7362 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 7363 } 7364 ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb); 7365 ahd->qinfifonext++; 7366 scb->hscb->next_hscb_busaddr = ahd->next_queued_hscb->hscb_busaddr; 7367 ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 7368 } 7369 7370 static int 7371 ahd_qinfifo_count(struct ahd_softc *ahd) 7372 { 7373 u_int qinpos; 7374 u_int wrap_qinpos; 7375 u_int wrap_qinfifonext; 7376 7377 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); 7378 qinpos = ahd_get_snscb_qoff(ahd); 7379 wrap_qinpos = AHD_QIN_WRAP(qinpos); 7380 wrap_qinfifonext = AHD_QIN_WRAP(ahd->qinfifonext); 7381 if (wrap_qinfifonext >= wrap_qinpos) 7382 return (wrap_qinfifonext - wrap_qinpos); 7383 else 7384 return (wrap_qinfifonext 7385 + NUM_ELEMENTS(ahd->qinfifo) - wrap_qinpos); 7386 } 7387 7388 void 7389 ahd_reset_cmds_pending(struct ahd_softc *ahd) 7390 { 7391 struct scb *scb; 7392 ahd_mode_state saved_modes; 7393 u_int pending_cmds; 7394 7395 saved_modes = ahd_save_modes(ahd); 7396 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 7397 7398 /* 7399 * Don't count any commands as outstanding that the 7400 * sequencer has already marked for completion. 7401 */ 7402 ahd_flush_qoutfifo(ahd); 7403 7404 pending_cmds = 0; 7405 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 7406 pending_cmds++; 7407 } 7408 ahd_outw(ahd, CMDS_PENDING, pending_cmds - ahd_qinfifo_count(ahd)); 7409 ahd_restore_modes(ahd, saved_modes); 7410 ahd->flags &= ~AHD_UPDATE_PEND_CMDS; 7411 } 7412 7413 void 7414 ahd_done_with_status(struct ahd_softc *ahd, struct scb *scb, uint32_t status) 7415 { 7416 cam_status ostat; 7417 cam_status cstat; 7418 7419 ostat = aic_get_transaction_status(scb); 7420 if (ostat == CAM_REQ_INPROG) 7421 aic_set_transaction_status(scb, status); 7422 cstat = aic_get_transaction_status(scb); 7423 if (cstat != CAM_REQ_CMP) 7424 aic_freeze_scb(scb); 7425 ahd_done(ahd, scb); 7426 } 7427 7428 int 7429 ahd_search_qinfifo(struct ahd_softc *ahd, int target, char channel, 7430 int lun, u_int tag, role_t role, uint32_t status, 7431 ahd_search_action action) 7432 { 7433 struct scb *scb; 7434 struct scb *mk_msg_scb; 7435 struct scb *prev_scb; 7436 ahd_mode_state saved_modes; 7437 u_int qinstart; 7438 u_int qinpos; 7439 u_int qintail; 7440 u_int tid_next; 7441 u_int tid_prev; 7442 u_int scbid; 7443 u_int seq_flags2; 7444 u_int savedscbptr; 7445 uint32_t busaddr; 7446 int found; 7447 int targets; 7448 7449 /* Must be in CCHAN mode */ 7450 saved_modes = ahd_save_modes(ahd); 7451 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 7452 7453 /* 7454 * Halt any pending SCB DMA. The sequencer will reinitiate 7455 * this dma if the qinfifo is not empty once we unpause. 7456 */ 7457 if ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN|CCSCBDIR)) 7458 == (CCARREN|CCSCBEN|CCSCBDIR)) { 7459 ahd_outb(ahd, CCSCBCTL, 7460 ahd_inb(ahd, CCSCBCTL) & ~(CCARREN|CCSCBEN)); 7461 while ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN)) != 0) 7462 ; 7463 } 7464 /* Determine sequencer's position in the qinfifo. */ 7465 qintail = AHD_QIN_WRAP(ahd->qinfifonext); 7466 qinstart = ahd_get_snscb_qoff(ahd); 7467 qinpos = AHD_QIN_WRAP(qinstart); 7468 found = 0; 7469 prev_scb = NULL; 7470 7471 if (action == SEARCH_PRINT) { 7472 printf("qinstart = %d qinfifonext = %d\nQINFIFO:", 7473 qinstart, ahd->qinfifonext); 7474 } 7475 7476 /* 7477 * Start with an empty queue. Entries that are not chosen 7478 * for removal will be re-added to the queue as we go. 7479 */ 7480 ahd->qinfifonext = qinstart; 7481 busaddr = aic_le32toh(ahd->next_queued_hscb->hscb_busaddr); 7482 ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr); 7483 7484 while (qinpos != qintail) { 7485 scb = ahd_lookup_scb(ahd, ahd->qinfifo[qinpos]); 7486 if (scb == NULL) { 7487 printf("qinpos = %d, SCB index = %d\n", 7488 qinpos, ahd->qinfifo[qinpos]); 7489 AHD_FATAL_ERROR(ahd); 7490 panic("Loop 1\n"); 7491 } 7492 7493 if (ahd_match_scb(ahd, scb, target, channel, lun, tag, role)) { 7494 /* 7495 * We found an scb that needs to be acted on. 7496 */ 7497 found++; 7498 switch (action) { 7499 case SEARCH_COMPLETE: 7500 if ((scb->flags & SCB_ACTIVE) == 0) 7501 printf("Inactive SCB in qinfifo\n"); 7502 ahd_done_with_status(ahd, scb, status); 7503 /* FALLTHROUGH */ 7504 case SEARCH_REMOVE: 7505 break; 7506 case SEARCH_PRINT: 7507 printf(" 0x%x", ahd->qinfifo[qinpos]); 7508 /* FALLTHROUGH */ 7509 case SEARCH_COUNT: 7510 ahd_qinfifo_requeue(ahd, prev_scb, scb); 7511 prev_scb = scb; 7512 break; 7513 } 7514 } else { 7515 ahd_qinfifo_requeue(ahd, prev_scb, scb); 7516 prev_scb = scb; 7517 } 7518 qinpos = AHD_QIN_WRAP(qinpos+1); 7519 } 7520 7521 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 7522 7523 if (action == SEARCH_PRINT) 7524 printf("\nWAITING_TID_QUEUES:\n"); 7525 7526 /* 7527 * Search waiting for selection lists. We traverse the 7528 * list of "their ids" waiting for selection and, if 7529 * appropriate, traverse the SCBs of each "their id" 7530 * looking for matches. 7531 */ 7532 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7533 seq_flags2 = ahd_inb(ahd, SEQ_FLAGS2); 7534 if ((seq_flags2 & PENDING_MK_MESSAGE) != 0) { 7535 scbid = ahd_inw(ahd, MK_MESSAGE_SCB); 7536 mk_msg_scb = ahd_lookup_scb(ahd, scbid); 7537 } else 7538 mk_msg_scb = NULL; 7539 savedscbptr = ahd_get_scbptr(ahd); 7540 tid_next = ahd_inw(ahd, WAITING_TID_HEAD); 7541 tid_prev = SCB_LIST_NULL; 7542 targets = 0; 7543 for (scbid = tid_next; !SCBID_IS_NULL(scbid); scbid = tid_next) { 7544 u_int tid_head; 7545 u_int tid_tail; 7546 7547 targets++; 7548 if (targets > AHD_NUM_TARGETS) 7549 panic("TID LIST LOOP"); 7550 7551 if (scbid >= ahd->scb_data.numscbs) { 7552 printf("%s: Waiting TID List inconsistency. " 7553 "SCB index == 0x%x, yet numscbs == 0x%x.", 7554 ahd_name(ahd), scbid, ahd->scb_data.numscbs); 7555 ahd_dump_card_state(ahd); 7556 panic("for safety"); 7557 } 7558 scb = ahd_lookup_scb(ahd, scbid); 7559 if (scb == NULL) { 7560 printf("%s: SCB = 0x%x Not Active!\n", 7561 ahd_name(ahd), scbid); 7562 panic("Waiting TID List traversal\n"); 7563 } 7564 ahd_set_scbptr(ahd, scbid); 7565 tid_next = ahd_inw_scbram(ahd, SCB_NEXT2); 7566 if (ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD, 7567 SCB_LIST_NULL, ROLE_UNKNOWN) == 0) { 7568 tid_prev = scbid; 7569 continue; 7570 } 7571 7572 /* 7573 * We found a list of scbs that needs to be searched. 7574 */ 7575 if (action == SEARCH_PRINT) 7576 printf(" %d ( ", SCB_GET_TARGET(ahd, scb)); 7577 tid_head = scbid; 7578 found += ahd_search_scb_list(ahd, target, channel, 7579 lun, tag, role, status, 7580 action, &tid_head, &tid_tail, 7581 SCB_GET_TARGET(ahd, scb)); 7582 /* 7583 * Check any MK_MESSAGE SCB that is still waiting to 7584 * enter this target's waiting for selection queue. 7585 */ 7586 if (mk_msg_scb != NULL 7587 && ahd_match_scb(ahd, mk_msg_scb, target, channel, 7588 lun, tag, role)) { 7589 7590 /* 7591 * We found an scb that needs to be acted on. 7592 */ 7593 found++; 7594 switch (action) { 7595 case SEARCH_COMPLETE: 7596 if ((mk_msg_scb->flags & SCB_ACTIVE) == 0) 7597 printf("Inactive SCB pending MK_MSG\n"); 7598 ahd_done_with_status(ahd, mk_msg_scb, status); 7599 /* FALLTHROUGH */ 7600 case SEARCH_REMOVE: 7601 { 7602 u_int tail_offset; 7603 7604 printf("Removing MK_MSG scb\n"); 7605 7606 /* 7607 * Reset our tail to the tail of the 7608 * main per-target list. 7609 */ 7610 tail_offset = WAITING_SCB_TAILS 7611 + (2 * SCB_GET_TARGET(ahd, mk_msg_scb)); 7612 ahd_outw(ahd, tail_offset, tid_tail); 7613 7614 seq_flags2 &= ~PENDING_MK_MESSAGE; 7615 ahd_outb(ahd, SEQ_FLAGS2, seq_flags2); 7616 ahd_outw(ahd, CMDS_PENDING, 7617 ahd_inw(ahd, CMDS_PENDING)-1); 7618 mk_msg_scb = NULL; 7619 break; 7620 } 7621 case SEARCH_PRINT: 7622 printf(" 0x%x", SCB_GET_TAG(scb)); 7623 /* FALLTHROUGH */ 7624 case SEARCH_COUNT: 7625 break; 7626 } 7627 } 7628 7629 if (mk_msg_scb != NULL 7630 && SCBID_IS_NULL(tid_head) 7631 && ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD, 7632 SCB_LIST_NULL, ROLE_UNKNOWN)) { 7633 7634 /* 7635 * When removing the last SCB for a target 7636 * queue with a pending MK_MESSAGE scb, we 7637 * must queue the MK_MESSAGE scb. 7638 */ 7639 printf("Queueing mk_msg_scb\n"); 7640 tid_head = ahd_inw(ahd, MK_MESSAGE_SCB); 7641 seq_flags2 &= ~PENDING_MK_MESSAGE; 7642 ahd_outb(ahd, SEQ_FLAGS2, seq_flags2); 7643 mk_msg_scb = NULL; 7644 } 7645 if (tid_head != scbid) 7646 ahd_stitch_tid_list(ahd, tid_prev, tid_head, tid_next); 7647 if (!SCBID_IS_NULL(tid_head)) 7648 tid_prev = tid_head; 7649 if (action == SEARCH_PRINT) 7650 printf(")\n"); 7651 } 7652 7653 /* Restore saved state. */ 7654 ahd_set_scbptr(ahd, savedscbptr); 7655 ahd_restore_modes(ahd, saved_modes); 7656 return (found); 7657 } 7658 7659 static int 7660 ahd_search_scb_list(struct ahd_softc *ahd, int target, char channel, 7661 int lun, u_int tag, role_t role, uint32_t status, 7662 ahd_search_action action, u_int *list_head, 7663 u_int *list_tail, u_int tid) 7664 { 7665 struct scb *scb; 7666 u_int scbid; 7667 u_int next; 7668 u_int prev; 7669 int found; 7670 7671 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7672 found = 0; 7673 prev = SCB_LIST_NULL; 7674 next = *list_head; 7675 *list_tail = SCB_LIST_NULL; 7676 for (scbid = next; !SCBID_IS_NULL(scbid); scbid = next) { 7677 if (scbid >= ahd->scb_data.numscbs) { 7678 printf("%s:SCB List inconsistency. " 7679 "SCB == 0x%x, yet numscbs == 0x%x.", 7680 ahd_name(ahd), scbid, ahd->scb_data.numscbs); 7681 ahd_dump_card_state(ahd); 7682 panic("for safety"); 7683 } 7684 scb = ahd_lookup_scb(ahd, scbid); 7685 if (scb == NULL) { 7686 printf("%s: SCB = %d Not Active!\n", 7687 ahd_name(ahd), scbid); 7688 panic("Waiting List traversal\n"); 7689 } 7690 ahd_set_scbptr(ahd, scbid); 7691 *list_tail = scbid; 7692 next = ahd_inw_scbram(ahd, SCB_NEXT); 7693 if (ahd_match_scb(ahd, scb, target, channel, 7694 lun, SCB_LIST_NULL, role) == 0) { 7695 prev = scbid; 7696 continue; 7697 } 7698 found++; 7699 switch (action) { 7700 case SEARCH_COMPLETE: 7701 if ((scb->flags & SCB_ACTIVE) == 0) 7702 printf("Inactive SCB in Waiting List\n"); 7703 ahd_done_with_status(ahd, scb, status); 7704 /* FALLTHROUGH */ 7705 case SEARCH_REMOVE: 7706 ahd_rem_wscb(ahd, scbid, prev, next, tid); 7707 *list_tail = prev; 7708 if (SCBID_IS_NULL(prev)) 7709 *list_head = next; 7710 break; 7711 case SEARCH_PRINT: 7712 printf("0x%x ", scbid); 7713 case SEARCH_COUNT: 7714 prev = scbid; 7715 break; 7716 } 7717 if (found > AHD_SCB_MAX) 7718 panic("SCB LIST LOOP"); 7719 } 7720 if (action == SEARCH_COMPLETE 7721 || action == SEARCH_REMOVE) 7722 ahd_outw(ahd, CMDS_PENDING, ahd_inw(ahd, CMDS_PENDING) - found); 7723 return (found); 7724 } 7725 7726 static void 7727 ahd_stitch_tid_list(struct ahd_softc *ahd, u_int tid_prev, 7728 u_int tid_cur, u_int tid_next) 7729 { 7730 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7731 7732 if (SCBID_IS_NULL(tid_cur)) { 7733 7734 /* Bypass current TID list */ 7735 if (SCBID_IS_NULL(tid_prev)) { 7736 ahd_outw(ahd, WAITING_TID_HEAD, tid_next); 7737 } else { 7738 ahd_set_scbptr(ahd, tid_prev); 7739 ahd_outw(ahd, SCB_NEXT2, tid_next); 7740 } 7741 if (SCBID_IS_NULL(tid_next)) 7742 ahd_outw(ahd, WAITING_TID_TAIL, tid_prev); 7743 } else { 7744 7745 /* Stitch through tid_cur */ 7746 if (SCBID_IS_NULL(tid_prev)) { 7747 ahd_outw(ahd, WAITING_TID_HEAD, tid_cur); 7748 } else { 7749 ahd_set_scbptr(ahd, tid_prev); 7750 ahd_outw(ahd, SCB_NEXT2, tid_cur); 7751 } 7752 ahd_set_scbptr(ahd, tid_cur); 7753 ahd_outw(ahd, SCB_NEXT2, tid_next); 7754 7755 if (SCBID_IS_NULL(tid_next)) 7756 ahd_outw(ahd, WAITING_TID_TAIL, tid_cur); 7757 } 7758 } 7759 7760 /* 7761 * Manipulate the waiting for selection list and return the 7762 * scb that follows the one that we remove. 7763 */ 7764 static u_int 7765 ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid, 7766 u_int prev, u_int next, u_int tid) 7767 { 7768 u_int tail_offset; 7769 7770 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7771 if (!SCBID_IS_NULL(prev)) { 7772 ahd_set_scbptr(ahd, prev); 7773 ahd_outw(ahd, SCB_NEXT, next); 7774 } 7775 7776 /* 7777 * SCBs that have MK_MESSAGE set in them may 7778 * cause the tail pointer to be updated without 7779 * setting the next pointer of the previous tail. 7780 * Only clear the tail if the removed SCB was 7781 * the tail. 7782 */ 7783 tail_offset = WAITING_SCB_TAILS + (2 * tid); 7784 if (SCBID_IS_NULL(next) 7785 && ahd_inw(ahd, tail_offset) == scbid) 7786 ahd_outw(ahd, tail_offset, prev); 7787 7788 ahd_add_scb_to_free_list(ahd, scbid); 7789 return (next); 7790 } 7791 7792 /* 7793 * Add the SCB as selected by SCBPTR onto the on chip list of 7794 * free hardware SCBs. This list is empty/unused if we are not 7795 * performing SCB paging. 7796 */ 7797 static void 7798 ahd_add_scb_to_free_list(struct ahd_softc *ahd, u_int scbid) 7799 { 7800 /* XXX Need some other mechanism to designate "free". */ 7801 /* 7802 * Invalidate the tag so that our abort 7803 * routines don't think it's active. 7804 ahd_outb(ahd, SCB_TAG, SCB_LIST_NULL); 7805 */ 7806 } 7807 7808 /******************************** Error Handling ******************************/ 7809 /* 7810 * Abort all SCBs that match the given description (target/channel/lun/tag), 7811 * setting their status to the passed in status if the status has not already 7812 * been modified from CAM_REQ_INPROG. This routine assumes that the sequencer 7813 * is paused before it is called. 7814 */ 7815 int 7816 ahd_abort_scbs(struct ahd_softc *ahd, int target, char channel, 7817 int lun, u_int tag, role_t role, uint32_t status) 7818 { 7819 struct scb *scbp; 7820 struct scb *scbp_next; 7821 u_int i, j; 7822 u_int maxtarget; 7823 u_int minlun; 7824 u_int maxlun; 7825 int found; 7826 ahd_mode_state saved_modes; 7827 7828 /* restore this when we're done */ 7829 saved_modes = ahd_save_modes(ahd); 7830 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7831 7832 found = ahd_search_qinfifo(ahd, target, channel, lun, SCB_LIST_NULL, 7833 role, CAM_REQUEUE_REQ, SEARCH_COMPLETE); 7834 7835 /* 7836 * Clean out the busy target table for any untagged commands. 7837 */ 7838 i = 0; 7839 maxtarget = 16; 7840 if (target != CAM_TARGET_WILDCARD) { 7841 i = target; 7842 if (channel == 'B') 7843 i += 8; 7844 maxtarget = i + 1; 7845 } 7846 7847 if (lun == CAM_LUN_WILDCARD) { 7848 minlun = 0; 7849 maxlun = AHD_NUM_LUNS_NONPKT; 7850 } else if (lun >= AHD_NUM_LUNS_NONPKT) { 7851 minlun = maxlun = 0; 7852 } else { 7853 minlun = lun; 7854 maxlun = lun + 1; 7855 } 7856 7857 if (role != ROLE_TARGET) { 7858 for (;i < maxtarget; i++) { 7859 for (j = minlun;j < maxlun; j++) { 7860 u_int scbid; 7861 u_int tcl; 7862 7863 tcl = BUILD_TCL_RAW(i, 'A', j); 7864 scbid = ahd_find_busy_tcl(ahd, tcl); 7865 scbp = ahd_lookup_scb(ahd, scbid); 7866 if (scbp == NULL 7867 || ahd_match_scb(ahd, scbp, target, channel, 7868 lun, tag, role) == 0) 7869 continue; 7870 ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(i, 'A', j)); 7871 } 7872 } 7873 } 7874 7875 /* 7876 * Don't abort commands that have already completed, 7877 * but haven't quite made it up to the host yet. 7878 */ 7879 ahd_flush_qoutfifo(ahd); 7880 7881 /* 7882 * Go through the pending CCB list and look for 7883 * commands for this target that are still active. 7884 * These are other tagged commands that were 7885 * disconnected when the reset occurred. 7886 */ 7887 scbp_next = LIST_FIRST(&ahd->pending_scbs); 7888 while (scbp_next != NULL) { 7889 scbp = scbp_next; 7890 scbp_next = LIST_NEXT(scbp, pending_links); 7891 if (ahd_match_scb(ahd, scbp, target, channel, lun, tag, role)) { 7892 cam_status ostat; 7893 7894 ostat = aic_get_transaction_status(scbp); 7895 if (ostat == CAM_REQ_INPROG) 7896 aic_set_transaction_status(scbp, status); 7897 if (aic_get_transaction_status(scbp) != CAM_REQ_CMP) 7898 aic_freeze_scb(scbp); 7899 if ((scbp->flags & SCB_ACTIVE) == 0) 7900 printf("Inactive SCB on pending list\n"); 7901 ahd_done(ahd, scbp); 7902 found++; 7903 } 7904 } 7905 ahd_restore_modes(ahd, saved_modes); 7906 ahd_platform_abort_scbs(ahd, target, channel, lun, tag, role, status); 7907 ahd->flags |= AHD_UPDATE_PEND_CMDS; 7908 return found; 7909 } 7910 7911 static void 7912 ahd_reset_current_bus(struct ahd_softc *ahd) 7913 { 7914 uint8_t scsiseq; 7915 7916 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7917 ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) & ~ENSCSIRST); 7918 scsiseq = ahd_inb(ahd, SCSISEQ0) & ~(ENSELO|ENARBO|SCSIRSTO); 7919 ahd_outb(ahd, SCSISEQ0, scsiseq | SCSIRSTO); 7920 ahd_flush_device_writes(ahd); 7921 aic_delay(AHD_BUSRESET_DELAY); 7922 /* Turn off the bus reset */ 7923 ahd_outb(ahd, SCSISEQ0, scsiseq); 7924 ahd_flush_device_writes(ahd); 7925 aic_delay(AHD_BUSRESET_DELAY); 7926 if ((ahd->bugs & AHD_SCSIRST_BUG) != 0) { 7927 /* 7928 * 2A Razor #474 7929 * Certain chip state is not cleared for 7930 * SCSI bus resets that we initiate, so 7931 * we must reset the chip. 7932 */ 7933 ahd_reset(ahd, /*reinit*/TRUE); 7934 ahd_intr_enable(ahd, /*enable*/TRUE); 7935 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7936 } 7937 7938 ahd_clear_intstat(ahd); 7939 } 7940 7941 int 7942 ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset) 7943 { 7944 struct ahd_devinfo devinfo; 7945 u_int initiator; 7946 u_int target; 7947 u_int max_scsiid; 7948 int found; 7949 u_int fifo; 7950 u_int next_fifo; 7951 7952 ahd->pending_device = NULL; 7953 7954 ahd_compile_devinfo(&devinfo, 7955 CAM_TARGET_WILDCARD, 7956 CAM_TARGET_WILDCARD, 7957 CAM_LUN_WILDCARD, 7958 channel, ROLE_UNKNOWN); 7959 ahd_pause(ahd); 7960 7961 /* Make sure the sequencer is in a safe location. */ 7962 ahd_clear_critical_section(ahd); 7963 7964 #ifdef AHD_TARGET_MODE 7965 if ((ahd->flags & AHD_TARGETROLE) != 0) { 7966 ahd_run_tqinfifo(ahd, /*paused*/TRUE); 7967 } 7968 #endif 7969 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7970 7971 /* 7972 * Disable selections so no automatic hardware 7973 * functions will modify chip state. 7974 */ 7975 ahd_outb(ahd, SCSISEQ0, 0); 7976 ahd_outb(ahd, SCSISEQ1, 0); 7977 7978 /* 7979 * Safely shut down our DMA engines. Always start with 7980 * the FIFO that is not currently active (if any are 7981 * actively connected). 7982 */ 7983 next_fifo = fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO; 7984 if (next_fifo > CURRFIFO_1) 7985 /* If disconneced, arbitrarily start with FIFO1. */ 7986 next_fifo = fifo = 0; 7987 do { 7988 next_fifo ^= CURRFIFO_1; 7989 ahd_set_modes(ahd, next_fifo, next_fifo); 7990 ahd_outb(ahd, DFCNTRL, 7991 ahd_inb(ahd, DFCNTRL) & ~(SCSIEN|HDMAEN)); 7992 while ((ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0) 7993 aic_delay(10); 7994 /* 7995 * Set CURRFIFO to the now inactive channel. 7996 */ 7997 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7998 ahd_outb(ahd, DFFSTAT, next_fifo); 7999 } while (next_fifo != fifo); 8000 8001 /* 8002 * Reset the bus if we are initiating this reset 8003 */ 8004 ahd_clear_msg_state(ahd); 8005 ahd_outb(ahd, SIMODE1, 8006 ahd_inb(ahd, SIMODE1) & ~(ENBUSFREE|ENSCSIRST)); 8007 8008 if (initiate_reset) 8009 ahd_reset_current_bus(ahd); 8010 8011 ahd_clear_intstat(ahd); 8012 8013 /* 8014 * Clean up all the state information for the 8015 * pending transactions on this bus. 8016 */ 8017 found = ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, channel, 8018 CAM_LUN_WILDCARD, SCB_LIST_NULL, 8019 ROLE_UNKNOWN, CAM_SCSI_BUS_RESET); 8020 8021 /* 8022 * Cleanup anything left in the FIFOs. 8023 */ 8024 ahd_clear_fifo(ahd, 0); 8025 ahd_clear_fifo(ahd, 1); 8026 8027 /* 8028 * Revert to async/narrow transfers until we renegotiate. 8029 */ 8030 max_scsiid = (ahd->features & AHD_WIDE) ? 15 : 7; 8031 for (target = 0; target <= max_scsiid; target++) { 8032 8033 if (ahd->enabled_targets[target] == NULL) 8034 continue; 8035 for (initiator = 0; initiator <= max_scsiid; initiator++) { 8036 struct ahd_devinfo devinfo; 8037 8038 ahd_compile_devinfo(&devinfo, target, initiator, 8039 CAM_LUN_WILDCARD, 8040 'A', ROLE_UNKNOWN); 8041 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 8042 AHD_TRANS_CUR, /*paused*/TRUE); 8043 ahd_set_syncrate(ahd, &devinfo, /*period*/0, 8044 /*offset*/0, /*ppr_options*/0, 8045 AHD_TRANS_CUR, /*paused*/TRUE); 8046 } 8047 } 8048 8049 #ifdef AHD_TARGET_MODE 8050 max_scsiid = (ahd->features & AHD_WIDE) ? 15 : 7; 8051 8052 /* 8053 * Send an immediate notify ccb to all target more peripheral 8054 * drivers affected by this action. 8055 */ 8056 for (target = 0; target <= max_scsiid; target++) { 8057 struct ahd_tmode_tstate* tstate; 8058 u_int lun; 8059 8060 tstate = ahd->enabled_targets[target]; 8061 if (tstate == NULL) 8062 continue; 8063 for (lun = 0; lun < AHD_NUM_LUNS; lun++) { 8064 struct ahd_tmode_lstate* lstate; 8065 8066 lstate = tstate->enabled_luns[lun]; 8067 if (lstate == NULL) 8068 continue; 8069 8070 ahd_queue_lstate_event(ahd, lstate, CAM_TARGET_WILDCARD, 8071 EVENT_TYPE_BUS_RESET, /*arg*/0); 8072 ahd_send_lstate_events(ahd, lstate); 8073 } 8074 } 8075 #endif 8076 /* Notify the XPT that a bus reset occurred */ 8077 ahd_send_async(ahd, devinfo.channel, CAM_TARGET_WILDCARD, 8078 CAM_LUN_WILDCARD, AC_BUS_RESET, NULL); 8079 ahd_restart(ahd); 8080 /* 8081 * Freeze the SIMQ until our poller can determine that 8082 * the bus reset has really gone away. We set the initial 8083 * timer to 0 to have the check performed as soon as possible 8084 * from the timer context. 8085 */ 8086 if ((ahd->flags & AHD_RESET_POLL_ACTIVE) == 0) { 8087 ahd->flags |= AHD_RESET_POLL_ACTIVE; 8088 aic_freeze_simq(ahd); 8089 aic_timer_reset(&ahd->reset_timer, 0, ahd_reset_poll, ahd); 8090 } 8091 return (found); 8092 } 8093 8094 8095 #define AHD_RESET_POLL_MS 1 8096 static void 8097 ahd_reset_poll(void *arg) 8098 { 8099 struct ahd_softc *ahd = (struct ahd_softc *)arg; 8100 u_int scsiseq1; 8101 8102 ahd_lock(ahd); 8103 ahd_pause(ahd); 8104 ahd_update_modes(ahd); 8105 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 8106 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI); 8107 if ((ahd_inb(ahd, SSTAT1) & SCSIRSTI) != 0) { 8108 aic_timer_reset(&ahd->reset_timer, AHD_RESET_POLL_MS, 8109 ahd_reset_poll, ahd); 8110 ahd_unpause(ahd); 8111 ahd_unlock(ahd); 8112 return; 8113 } 8114 8115 /* Reset is now low. Complete chip reinitialization. */ 8116 ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) | ENSCSIRST); 8117 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 8118 ahd_outb(ahd, SCSISEQ1, scsiseq1 & (ENSELI|ENRSELI|ENAUTOATNP)); 8119 ahd_unpause(ahd); 8120 ahd->flags &= ~AHD_RESET_POLL_ACTIVE; 8121 aic_release_simq(ahd); 8122 ahd_unlock(ahd); 8123 } 8124 8125 /**************************** Statistics Processing ***************************/ 8126 static void 8127 ahd_stat_timer(void *arg) 8128 { 8129 struct ahd_softc *ahd = (struct ahd_softc *)arg; 8130 int enint_coal; 8131 8132 ahd_lock(ahd); 8133 enint_coal = ahd->hs_mailbox & ENINT_COALESCE; 8134 if (ahd->cmdcmplt_total > ahd->int_coalescing_threshold) 8135 enint_coal |= ENINT_COALESCE; 8136 else if (ahd->cmdcmplt_total < ahd->int_coalescing_stop_threshold) 8137 enint_coal &= ~ENINT_COALESCE; 8138 8139 if (enint_coal != (ahd->hs_mailbox & ENINT_COALESCE)) { 8140 ahd_enable_coalescing(ahd, enint_coal); 8141 #ifdef AHD_DEBUG 8142 if ((ahd_debug & AHD_SHOW_INT_COALESCING) != 0) 8143 printf("%s: Interrupt coalescing " 8144 "now %sabled. Cmds %d\n", 8145 ahd_name(ahd), 8146 (enint_coal & ENINT_COALESCE) ? "en" : "dis", 8147 ahd->cmdcmplt_total); 8148 #endif 8149 } 8150 8151 ahd->cmdcmplt_bucket = (ahd->cmdcmplt_bucket+1) & (AHD_STAT_BUCKETS-1); 8152 ahd->cmdcmplt_total -= ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket]; 8153 ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket] = 0; 8154 aic_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_MS, 8155 ahd_stat_timer, ahd); 8156 ahd_unlock(ahd); 8157 } 8158 8159 /****************************** Status Processing *****************************/ 8160 void 8161 ahd_handle_scb_status(struct ahd_softc *ahd, struct scb *scb) 8162 { 8163 if (scb->hscb->shared_data.istatus.scsi_status != 0) { 8164 ahd_handle_scsi_status(ahd, scb); 8165 } else { 8166 ahd_calc_residual(ahd, scb); 8167 ahd_done(ahd, scb); 8168 } 8169 } 8170 8171 void 8172 ahd_handle_scsi_status(struct ahd_softc *ahd, struct scb *scb) 8173 { 8174 struct hardware_scb *hscb; 8175 int paused; 8176 8177 /* 8178 * The sequencer freezes its select-out queue 8179 * anytime a SCSI status error occurs. We must 8180 * handle the error and increment our qfreeze count 8181 * to allow the sequencer to continue. We don't 8182 * bother clearing critical sections here since all 8183 * operations are on data structures that the sequencer 8184 * is not touching once the queue is frozen. 8185 */ 8186 hscb = scb->hscb; 8187 8188 if (ahd_is_paused(ahd)) { 8189 paused = 1; 8190 } else { 8191 paused = 0; 8192 ahd_pause(ahd); 8193 } 8194 8195 /* Freeze the queue until the client sees the error. */ 8196 ahd_freeze_devq(ahd, scb); 8197 aic_freeze_scb(scb); 8198 ahd->qfreeze_cnt++; 8199 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt); 8200 8201 if (paused == 0) 8202 ahd_unpause(ahd); 8203 8204 /* Don't want to clobber the original sense code */ 8205 if ((scb->flags & SCB_SENSE) != 0) { 8206 /* 8207 * Clear the SCB_SENSE Flag and perform 8208 * a normal command completion. 8209 */ 8210 scb->flags &= ~SCB_SENSE; 8211 aic_set_transaction_status(scb, CAM_AUTOSENSE_FAIL); 8212 ahd_done(ahd, scb); 8213 return; 8214 } 8215 aic_set_transaction_status(scb, CAM_SCSI_STATUS_ERROR); 8216 aic_set_scsi_status(scb, hscb->shared_data.istatus.scsi_status); 8217 switch (hscb->shared_data.istatus.scsi_status) { 8218 case STATUS_PKT_SENSE: 8219 { 8220 struct scsi_status_iu_header *siu; 8221 8222 ahd_sync_sense(ahd, scb, BUS_DMASYNC_POSTREAD); 8223 siu = (struct scsi_status_iu_header *)scb->sense_data; 8224 aic_set_scsi_status(scb, siu->status); 8225 #ifdef AHD_DEBUG 8226 if ((ahd_debug & AHD_SHOW_SENSE) != 0) { 8227 ahd_print_path(ahd, scb); 8228 printf("SCB 0x%x Received PKT Status of 0x%x\n", 8229 SCB_GET_TAG(scb), siu->status); 8230 printf("\tflags = 0x%x, sense len = 0x%x, " 8231 "pktfail = 0x%x\n", 8232 siu->flags, scsi_4btoul(siu->sense_length), 8233 scsi_4btoul(siu->pkt_failures_length)); 8234 } 8235 #endif 8236 if ((siu->flags & SIU_RSPVALID) != 0) { 8237 ahd_print_path(ahd, scb); 8238 if (scsi_4btoul(siu->pkt_failures_length) < 4) { 8239 printf("Unable to parse pkt_failures\n"); 8240 } else { 8241 8242 switch (SIU_PKTFAIL_CODE(siu)) { 8243 case SIU_PFC_NONE: 8244 printf("No packet failure found\n"); 8245 AHD_UNCORRECTABLE_ERROR(ahd); 8246 break; 8247 case SIU_PFC_CIU_FIELDS_INVALID: 8248 printf("Invalid Command IU Field\n"); 8249 AHD_UNCORRECTABLE_ERROR(ahd); 8250 break; 8251 case SIU_PFC_TMF_NOT_SUPPORTED: 8252 printf("TMF not supportd\n"); 8253 AHD_UNCORRECTABLE_ERROR(ahd); 8254 break; 8255 case SIU_PFC_TMF_FAILED: 8256 printf("TMF failed\n"); 8257 AHD_UNCORRECTABLE_ERROR(ahd); 8258 break; 8259 case SIU_PFC_INVALID_TYPE_CODE: 8260 printf("Invalid L_Q Type code\n"); 8261 AHD_UNCORRECTABLE_ERROR(ahd); 8262 break; 8263 case SIU_PFC_ILLEGAL_REQUEST: 8264 AHD_UNCORRECTABLE_ERROR(ahd); 8265 printf("Illegal request\n"); 8266 default: 8267 break; 8268 } 8269 } 8270 if (siu->status == SCSI_STATUS_OK) 8271 aic_set_transaction_status(scb, 8272 CAM_REQ_CMP_ERR); 8273 } 8274 if ((siu->flags & SIU_SNSVALID) != 0) { 8275 scb->flags |= SCB_PKT_SENSE; 8276 #ifdef AHD_DEBUG 8277 if ((ahd_debug & AHD_SHOW_SENSE) != 0) 8278 printf("Sense data available\n"); 8279 #endif 8280 } 8281 ahd_done(ahd, scb); 8282 break; 8283 } 8284 case SCSI_STATUS_CMD_TERMINATED: 8285 case SCSI_STATUS_CHECK_COND: 8286 { 8287 struct ahd_devinfo devinfo; 8288 struct ahd_dma_seg *sg; 8289 struct scsi_sense *sc; 8290 struct ahd_initiator_tinfo *targ_info; 8291 struct ahd_tmode_tstate *tstate; 8292 struct ahd_transinfo *tinfo; 8293 #ifdef AHD_DEBUG 8294 if (ahd_debug & AHD_SHOW_SENSE) { 8295 ahd_print_path(ahd, scb); 8296 printf("SCB %d: requests Check Status\n", 8297 SCB_GET_TAG(scb)); 8298 } 8299 #endif 8300 8301 if (aic_perform_autosense(scb) == 0) 8302 break; 8303 8304 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb), 8305 SCB_GET_TARGET(ahd, scb), 8306 SCB_GET_LUN(scb), 8307 SCB_GET_CHANNEL(ahd, scb), 8308 ROLE_INITIATOR); 8309 targ_info = ahd_fetch_transinfo(ahd, 8310 devinfo.channel, 8311 devinfo.our_scsiid, 8312 devinfo.target, 8313 &tstate); 8314 tinfo = &targ_info->curr; 8315 sg = scb->sg_list; 8316 sc = (struct scsi_sense *)hscb->shared_data.idata.cdb; 8317 /* 8318 * Save off the residual if there is one. 8319 */ 8320 ahd_update_residual(ahd, scb); 8321 #ifdef AHD_DEBUG 8322 if (ahd_debug & AHD_SHOW_SENSE) { 8323 ahd_print_path(ahd, scb); 8324 printf("Sending Sense\n"); 8325 } 8326 #endif 8327 scb->sg_count = 0; 8328 sg = ahd_sg_setup(ahd, scb, sg, ahd_get_sense_bufaddr(ahd, scb), 8329 aic_get_sense_bufsize(ahd, scb), 8330 /*last*/TRUE); 8331 sc->opcode = REQUEST_SENSE; 8332 sc->byte2 = 0; 8333 if (tinfo->protocol_version <= SCSI_REV_2 8334 && SCB_GET_LUN(scb) < 8) 8335 sc->byte2 = SCB_GET_LUN(scb) << 5; 8336 sc->unused[0] = 0; 8337 sc->unused[1] = 0; 8338 sc->length = aic_get_sense_bufsize(ahd, scb); 8339 sc->control = 0; 8340 8341 /* 8342 * We can't allow the target to disconnect. 8343 * This will be an untagged transaction and 8344 * having the target disconnect will make this 8345 * transaction indestinguishable from outstanding 8346 * tagged transactions. 8347 */ 8348 hscb->control = 0; 8349 8350 /* 8351 * This request sense could be because the 8352 * the device lost power or in some other 8353 * way has lost our transfer negotiations. 8354 * Renegotiate if appropriate. Unit attention 8355 * errors will be reported before any data 8356 * phases occur. 8357 */ 8358 if (aic_get_residual(scb) == aic_get_transfer_length(scb)) { 8359 ahd_update_neg_request(ahd, &devinfo, 8360 tstate, targ_info, 8361 AHD_NEG_IF_NON_ASYNC); 8362 } 8363 if (tstate->auto_negotiate & devinfo.target_mask) { 8364 hscb->control |= MK_MESSAGE; 8365 scb->flags &= 8366 ~(SCB_NEGOTIATE|SCB_ABORT|SCB_DEVICE_RESET); 8367 scb->flags |= SCB_AUTO_NEGOTIATE; 8368 } 8369 hscb->cdb_len = sizeof(*sc); 8370 ahd_setup_data_scb(ahd, scb); 8371 scb->flags |= SCB_SENSE; 8372 ahd_queue_scb(ahd, scb); 8373 /* 8374 * Ensure we have enough time to actually 8375 * retrieve the sense, but only schedule 8376 * the timer if we are not in recovery or 8377 * this is a recovery SCB that is allowed 8378 * to have an active timer. 8379 */ 8380 if (ahd->scb_data.recovery_scbs == 0 8381 || (scb->flags & SCB_RECOVERY_SCB) != 0) 8382 aic_scb_timer_reset(scb, 5 * 1000); 8383 break; 8384 } 8385 case SCSI_STATUS_OK: 8386 printf("%s: Interrupted for staus of 0???\n", 8387 ahd_name(ahd)); 8388 /* FALLTHROUGH */ 8389 default: 8390 ahd_done(ahd, scb); 8391 break; 8392 } 8393 } 8394 8395 /* 8396 * Calculate the residual for a just completed SCB. 8397 */ 8398 void 8399 ahd_calc_residual(struct ahd_softc *ahd, struct scb *scb) 8400 { 8401 struct hardware_scb *hscb; 8402 struct initiator_status *spkt; 8403 uint32_t sgptr; 8404 uint32_t resid_sgptr; 8405 uint32_t resid; 8406 8407 /* 8408 * 5 cases. 8409 * 1) No residual. 8410 * SG_STATUS_VALID clear in sgptr. 8411 * 2) Transferless command 8412 * 3) Never performed any transfers. 8413 * sgptr has SG_FULL_RESID set. 8414 * 4) No residual but target did not 8415 * save data pointers after the 8416 * last transfer, so sgptr was 8417 * never updated. 8418 * 5) We have a partial residual. 8419 * Use residual_sgptr to determine 8420 * where we are. 8421 */ 8422 8423 hscb = scb->hscb; 8424 sgptr = aic_le32toh(hscb->sgptr); 8425 if ((sgptr & SG_STATUS_VALID) == 0) 8426 /* Case 1 */ 8427 return; 8428 sgptr &= ~SG_STATUS_VALID; 8429 8430 if ((sgptr & SG_LIST_NULL) != 0) 8431 /* Case 2 */ 8432 return; 8433 8434 /* 8435 * Residual fields are the same in both 8436 * target and initiator status packets, 8437 * so we can always use the initiator fields 8438 * regardless of the role for this SCB. 8439 */ 8440 spkt = &hscb->shared_data.istatus; 8441 resid_sgptr = aic_le32toh(spkt->residual_sgptr); 8442 if ((sgptr & SG_FULL_RESID) != 0) { 8443 /* Case 3 */ 8444 resid = aic_get_transfer_length(scb); 8445 } else if ((resid_sgptr & SG_LIST_NULL) != 0) { 8446 /* Case 4 */ 8447 return; 8448 } else if ((resid_sgptr & SG_OVERRUN_RESID) != 0) { 8449 ahd_print_path(ahd, scb); 8450 printf("data overrun detected Tag == 0x%x.\n", 8451 SCB_GET_TAG(scb)); 8452 ahd_freeze_devq(ahd, scb); 8453 aic_set_transaction_status(scb, CAM_DATA_RUN_ERR); 8454 aic_freeze_scb(scb); 8455 return; 8456 } else if ((resid_sgptr & ~SG_PTR_MASK) != 0) { 8457 panic("Bogus resid sgptr value 0x%x\n", resid_sgptr); 8458 /* NOTREACHED */ 8459 } else { 8460 struct ahd_dma_seg *sg; 8461 8462 /* 8463 * Remainder of the SG where the transfer 8464 * stopped. 8465 */ 8466 resid = aic_le32toh(spkt->residual_datacnt) & AHD_SG_LEN_MASK; 8467 sg = ahd_sg_bus_to_virt(ahd, scb, resid_sgptr & SG_PTR_MASK); 8468 8469 /* The residual sg_ptr always points to the next sg */ 8470 sg--; 8471 8472 /* 8473 * Add up the contents of all residual 8474 * SG segments that are after the SG where 8475 * the transfer stopped. 8476 */ 8477 while ((aic_le32toh(sg->len) & AHD_DMA_LAST_SEG) == 0) { 8478 sg++; 8479 resid += aic_le32toh(sg->len) & AHD_SG_LEN_MASK; 8480 } 8481 } 8482 if ((scb->flags & SCB_SENSE) == 0) 8483 aic_set_residual(scb, resid); 8484 else 8485 aic_set_sense_residual(scb, resid); 8486 8487 #ifdef AHD_DEBUG 8488 if ((ahd_debug & AHD_SHOW_MISC) != 0) { 8489 ahd_print_path(ahd, scb); 8490 printf("Handled %sResidual of %d bytes\n", 8491 (scb->flags & SCB_SENSE) ? "Sense " : "", resid); 8492 } 8493 #endif 8494 } 8495 8496 /******************************* Target Mode **********************************/ 8497 #ifdef AHD_TARGET_MODE 8498 /* 8499 * Add a target mode event to this lun's queue 8500 */ 8501 static void 8502 ahd_queue_lstate_event(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate, 8503 u_int initiator_id, u_int event_type, u_int event_arg) 8504 { 8505 struct ahd_tmode_event *event; 8506 int pending; 8507 8508 xpt_freeze_devq(lstate->path, /*count*/1); 8509 if (lstate->event_w_idx >= lstate->event_r_idx) 8510 pending = lstate->event_w_idx - lstate->event_r_idx; 8511 else 8512 pending = AHD_TMODE_EVENT_BUFFER_SIZE + 1 8513 - (lstate->event_r_idx - lstate->event_w_idx); 8514 8515 if (event_type == EVENT_TYPE_BUS_RESET 8516 || event_type == MSG_BUS_DEV_RESET) { 8517 /* 8518 * Any earlier events are irrelevant, so reset our buffer. 8519 * This has the effect of allowing us to deal with reset 8520 * floods (an external device holding down the reset line) 8521 * without losing the event that is really interesting. 8522 */ 8523 lstate->event_r_idx = 0; 8524 lstate->event_w_idx = 0; 8525 xpt_release_devq(lstate->path, pending, /*runqueue*/FALSE); 8526 } 8527 8528 if (pending == AHD_TMODE_EVENT_BUFFER_SIZE) { 8529 xpt_print_path(lstate->path); 8530 printf("immediate event %x:%x lost\n", 8531 lstate->event_buffer[lstate->event_r_idx].event_type, 8532 lstate->event_buffer[lstate->event_r_idx].event_arg); 8533 lstate->event_r_idx++; 8534 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 8535 lstate->event_r_idx = 0; 8536 xpt_release_devq(lstate->path, /*count*/1, /*runqueue*/FALSE); 8537 } 8538 8539 event = &lstate->event_buffer[lstate->event_w_idx]; 8540 event->initiator_id = initiator_id; 8541 event->event_type = event_type; 8542 event->event_arg = event_arg; 8543 lstate->event_w_idx++; 8544 if (lstate->event_w_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 8545 lstate->event_w_idx = 0; 8546 } 8547 8548 /* 8549 * Send any target mode events queued up waiting 8550 * for immediate notify resources. 8551 */ 8552 void 8553 ahd_send_lstate_events(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate) 8554 { 8555 struct ccb_hdr *ccbh; 8556 struct ccb_immediate_notify *inot; 8557 8558 while (lstate->event_r_idx != lstate->event_w_idx 8559 && (ccbh = SLIST_FIRST(&lstate->immed_notifies)) != NULL) { 8560 struct ahd_tmode_event *event; 8561 8562 event = &lstate->event_buffer[lstate->event_r_idx]; 8563 SLIST_REMOVE_HEAD(&lstate->immed_notifies, sim_links.sle); 8564 inot = (struct ccb_immediate_notify *)ccbh; 8565 switch (event->event_type) { 8566 case EVENT_TYPE_BUS_RESET: 8567 ccbh->status = CAM_SCSI_BUS_RESET|CAM_DEV_QFRZN; 8568 break; 8569 default: 8570 ccbh->status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN; 8571 inot->arg = event->event_type; 8572 inot->seq_id = event->event_arg; 8573 break; 8574 } 8575 inot->initiator_id = event->initiator_id; 8576 xpt_done((union ccb *)inot); 8577 lstate->event_r_idx++; 8578 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 8579 lstate->event_r_idx = 0; 8580 } 8581 } 8582 #endif 8583 8584 /******************** Sequencer Program Patching/Download *********************/ 8585 8586 #ifdef AHD_DUMP_SEQ 8587 void 8588 ahd_dumpseq(struct ahd_softc* ahd) 8589 { 8590 int i; 8591 int max_prog; 8592 8593 max_prog = 2048; 8594 8595 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM); 8596 ahd_outw(ahd, PRGMCNT, 0); 8597 for (i = 0; i < max_prog; i++) { 8598 uint8_t ins_bytes[4]; 8599 8600 ahd_insb(ahd, SEQRAM, ins_bytes, 4); 8601 printf("0x%08x\n", ins_bytes[0] << 24 8602 | ins_bytes[1] << 16 8603 | ins_bytes[2] << 8 8604 | ins_bytes[3]); 8605 } 8606 } 8607 #endif 8608 8609 static void 8610 ahd_loadseq(struct ahd_softc *ahd) 8611 { 8612 struct cs cs_table[num_critical_sections]; 8613 u_int begin_set[num_critical_sections]; 8614 u_int end_set[num_critical_sections]; 8615 struct patch *cur_patch; 8616 u_int cs_count; 8617 u_int cur_cs; 8618 u_int i; 8619 int downloaded; 8620 u_int skip_addr; 8621 u_int sg_prefetch_cnt; 8622 u_int sg_prefetch_cnt_limit; 8623 u_int sg_prefetch_align; 8624 u_int sg_size; 8625 u_int cacheline_mask; 8626 uint8_t download_consts[DOWNLOAD_CONST_COUNT]; 8627 8628 if (bootverbose) 8629 printf("%s: Downloading Sequencer Program...", 8630 ahd_name(ahd)); 8631 8632 #if DOWNLOAD_CONST_COUNT != 8 8633 #error "Download Const Mismatch" 8634 #endif 8635 /* 8636 * Start out with 0 critical sections 8637 * that apply to this firmware load. 8638 */ 8639 cs_count = 0; 8640 cur_cs = 0; 8641 memset(begin_set, 0, sizeof(begin_set)); 8642 memset(end_set, 0, sizeof(end_set)); 8643 8644 /* 8645 * Setup downloadable constant table. 8646 * 8647 * The computation for the S/G prefetch variables is 8648 * a bit complicated. We would like to always fetch 8649 * in terms of cachelined sized increments. However, 8650 * if the cacheline is not an even multiple of the 8651 * SG element size or is larger than our SG RAM, using 8652 * just the cache size might leave us with only a portion 8653 * of an SG element at the tail of a prefetch. If the 8654 * cacheline is larger than our S/G prefetch buffer less 8655 * the size of an SG element, we may round down to a cacheline 8656 * that doesn't contain any or all of the S/G of interest 8657 * within the bounds of our S/G ram. Provide variables to 8658 * the sequencer that will allow it to handle these edge 8659 * cases. 8660 */ 8661 /* Start by aligning to the nearest cacheline. */ 8662 sg_prefetch_align = ahd->pci_cachesize; 8663 if (sg_prefetch_align == 0) 8664 sg_prefetch_align = 8; 8665 /* Round down to the nearest power of 2. */ 8666 while (powerof2(sg_prefetch_align) == 0) 8667 sg_prefetch_align--; 8668 8669 cacheline_mask = sg_prefetch_align - 1; 8670 8671 /* 8672 * If the cacheline boundary is greater than half our prefetch RAM 8673 * we risk not being able to fetch even a single complete S/G 8674 * segment if we align to that boundary. 8675 */ 8676 if (sg_prefetch_align > CCSGADDR_MAX/2) 8677 sg_prefetch_align = CCSGADDR_MAX/2; 8678 /* Start by fetching a single cacheline. */ 8679 sg_prefetch_cnt = sg_prefetch_align; 8680 /* 8681 * Increment the prefetch count by cachelines until 8682 * at least one S/G element will fit. 8683 */ 8684 sg_size = sizeof(struct ahd_dma_seg); 8685 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 8686 sg_size = sizeof(struct ahd_dma64_seg); 8687 while (sg_prefetch_cnt < sg_size) 8688 sg_prefetch_cnt += sg_prefetch_align; 8689 /* 8690 * If the cacheline is not an even multiple of 8691 * the S/G size, we may only get a partial S/G when 8692 * we align. Add a cacheline if this is the case. 8693 */ 8694 if ((sg_prefetch_align % sg_size) != 0 8695 && (sg_prefetch_cnt < CCSGADDR_MAX)) 8696 sg_prefetch_cnt += sg_prefetch_align; 8697 /* 8698 * Lastly, compute a value that the sequencer can use 8699 * to determine if the remainder of the CCSGRAM buffer 8700 * has a full S/G element in it. 8701 */ 8702 sg_prefetch_cnt_limit = -(sg_prefetch_cnt - sg_size + 1); 8703 download_consts[SG_PREFETCH_CNT] = sg_prefetch_cnt; 8704 download_consts[SG_PREFETCH_CNT_LIMIT] = sg_prefetch_cnt_limit; 8705 download_consts[SG_PREFETCH_ALIGN_MASK] = ~(sg_prefetch_align - 1); 8706 download_consts[SG_PREFETCH_ADDR_MASK] = (sg_prefetch_align - 1); 8707 download_consts[SG_SIZEOF] = sg_size; 8708 download_consts[PKT_OVERRUN_BUFOFFSET] = 8709 (ahd->overrun_buf - (uint8_t *)ahd->qoutfifo) / 256; 8710 download_consts[SCB_TRANSFER_SIZE] = SCB_TRANSFER_SIZE_1BYTE_LUN; 8711 download_consts[CACHELINE_MASK] = cacheline_mask; 8712 cur_patch = patches; 8713 downloaded = 0; 8714 skip_addr = 0; 8715 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM); 8716 ahd_outw(ahd, PRGMCNT, 0); 8717 8718 for (i = 0; i < sizeof(seqprog)/4; i++) { 8719 if (ahd_check_patch(ahd, &cur_patch, i, &skip_addr) == 0) { 8720 /* 8721 * Don't download this instruction as it 8722 * is in a patch that was removed. 8723 */ 8724 continue; 8725 } 8726 /* 8727 * Move through the CS table until we find a CS 8728 * that might apply to this instruction. 8729 */ 8730 for (; cur_cs < num_critical_sections; cur_cs++) { 8731 if (critical_sections[cur_cs].end <= i) { 8732 if (begin_set[cs_count] == TRUE 8733 && end_set[cs_count] == FALSE) { 8734 cs_table[cs_count].end = downloaded; 8735 end_set[cs_count] = TRUE; 8736 cs_count++; 8737 } 8738 continue; 8739 } 8740 if (critical_sections[cur_cs].begin <= i 8741 && begin_set[cs_count] == FALSE) { 8742 cs_table[cs_count].begin = downloaded; 8743 begin_set[cs_count] = TRUE; 8744 } 8745 break; 8746 } 8747 ahd_download_instr(ahd, i, download_consts); 8748 downloaded++; 8749 } 8750 8751 ahd->num_critical_sections = cs_count; 8752 if (cs_count != 0) { 8753 8754 cs_count *= sizeof(struct cs); 8755 ahd->critical_sections = malloc(cs_count, M_DEVBUF, M_NOWAIT); 8756 if (ahd->critical_sections == NULL) 8757 panic("ahd_loadseq: Could not malloc"); 8758 memcpy(ahd->critical_sections, cs_table, cs_count); 8759 } 8760 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE); 8761 8762 if (bootverbose) { 8763 printf(" %d instructions downloaded\n", downloaded); 8764 printf("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n", 8765 ahd_name(ahd), ahd->features, ahd->bugs, ahd->flags); 8766 } 8767 } 8768 8769 static int 8770 ahd_check_patch(struct ahd_softc *ahd, struct patch **start_patch, 8771 u_int start_instr, u_int *skip_addr) 8772 { 8773 struct patch *cur_patch; 8774 struct patch *last_patch; 8775 u_int num_patches; 8776 8777 num_patches = sizeof(patches)/sizeof(struct patch); 8778 last_patch = &patches[num_patches]; 8779 cur_patch = *start_patch; 8780 8781 while (cur_patch < last_patch && start_instr == cur_patch->begin) { 8782 8783 if (cur_patch->patch_func(ahd) == 0) { 8784 8785 /* Start rejecting code */ 8786 *skip_addr = start_instr + cur_patch->skip_instr; 8787 cur_patch += cur_patch->skip_patch; 8788 } else { 8789 /* Accepted this patch. Advance to the next 8790 * one and wait for our instruction pointer to 8791 * hit this point. 8792 */ 8793 cur_patch++; 8794 } 8795 } 8796 8797 *start_patch = cur_patch; 8798 if (start_instr < *skip_addr) 8799 /* Still skipping */ 8800 return (0); 8801 8802 return (1); 8803 } 8804 8805 static u_int 8806 ahd_resolve_seqaddr(struct ahd_softc *ahd, u_int address) 8807 { 8808 struct patch *cur_patch; 8809 int address_offset; 8810 u_int skip_addr; 8811 u_int i; 8812 8813 address_offset = 0; 8814 cur_patch = patches; 8815 skip_addr = 0; 8816 8817 for (i = 0; i < address;) { 8818 8819 ahd_check_patch(ahd, &cur_patch, i, &skip_addr); 8820 8821 if (skip_addr > i) { 8822 int end_addr; 8823 8824 end_addr = MIN(address, skip_addr); 8825 address_offset += end_addr - i; 8826 i = skip_addr; 8827 } else { 8828 i++; 8829 } 8830 } 8831 return (address - address_offset); 8832 } 8833 8834 static void 8835 ahd_download_instr(struct ahd_softc *ahd, u_int instrptr, uint8_t *dconsts) 8836 { 8837 union ins_formats instr; 8838 struct ins_format1 *fmt1_ins; 8839 struct ins_format3 *fmt3_ins; 8840 u_int opcode; 8841 8842 /* 8843 * The firmware is always compiled into a little endian format. 8844 */ 8845 instr.integer = aic_le32toh(*(uint32_t*)&seqprog[instrptr * 4]); 8846 8847 fmt1_ins = &instr.format1; 8848 fmt3_ins = NULL; 8849 8850 /* Pull the opcode */ 8851 opcode = instr.format1.opcode; 8852 switch (opcode) { 8853 case AIC_OP_JMP: 8854 case AIC_OP_JC: 8855 case AIC_OP_JNC: 8856 case AIC_OP_CALL: 8857 case AIC_OP_JNE: 8858 case AIC_OP_JNZ: 8859 case AIC_OP_JE: 8860 case AIC_OP_JZ: 8861 { 8862 fmt3_ins = &instr.format3; 8863 fmt3_ins->address = ahd_resolve_seqaddr(ahd, fmt3_ins->address); 8864 /* FALLTHROUGH */ 8865 } 8866 case AIC_OP_OR: 8867 case AIC_OP_AND: 8868 case AIC_OP_XOR: 8869 case AIC_OP_ADD: 8870 case AIC_OP_ADC: 8871 case AIC_OP_BMOV: 8872 if (fmt1_ins->parity != 0) { 8873 fmt1_ins->immediate = dconsts[fmt1_ins->immediate]; 8874 } 8875 fmt1_ins->parity = 0; 8876 /* FALLTHROUGH */ 8877 case AIC_OP_ROL: 8878 { 8879 int i, count; 8880 8881 /* Calculate odd parity for the instruction */ 8882 for (i = 0, count = 0; i < 31; i++) { 8883 uint32_t mask; 8884 8885 mask = 0x01 << i; 8886 if ((instr.integer & mask) != 0) 8887 count++; 8888 } 8889 if ((count & 0x01) == 0) 8890 instr.format1.parity = 1; 8891 8892 /* The sequencer is a little endian cpu */ 8893 instr.integer = aic_htole32(instr.integer); 8894 ahd_outsb(ahd, SEQRAM, instr.bytes, 4); 8895 break; 8896 } 8897 default: 8898 panic("Unknown opcode encountered in seq program"); 8899 break; 8900 } 8901 } 8902 8903 static int 8904 ahd_probe_stack_size(struct ahd_softc *ahd) 8905 { 8906 int last_probe; 8907 8908 last_probe = 0; 8909 while (1) { 8910 int i; 8911 8912 /* 8913 * We avoid using 0 as a pattern to avoid 8914 * confusion if the stack implementation 8915 * "back-fills" with zeros when "poping' 8916 * entries. 8917 */ 8918 for (i = 1; i <= last_probe+1; i++) { 8919 ahd_outb(ahd, STACK, i & 0xFF); 8920 ahd_outb(ahd, STACK, (i >> 8) & 0xFF); 8921 } 8922 8923 /* Verify */ 8924 for (i = last_probe+1; i > 0; i--) { 8925 u_int stack_entry; 8926 8927 stack_entry = ahd_inb(ahd, STACK) 8928 |(ahd_inb(ahd, STACK) << 8); 8929 if (stack_entry != i) 8930 goto sized; 8931 } 8932 last_probe++; 8933 } 8934 sized: 8935 return (last_probe); 8936 } 8937 8938 void 8939 ahd_dump_all_cards_state(void) 8940 { 8941 struct ahd_softc *list_ahd; 8942 8943 TAILQ_FOREACH(list_ahd, &ahd_tailq, links) { 8944 ahd_dump_card_state(list_ahd); 8945 } 8946 } 8947 8948 int 8949 ahd_print_register(ahd_reg_parse_entry_t *table, u_int num_entries, 8950 const char *name, u_int address, u_int value, 8951 u_int *cur_column, u_int wrap_point) 8952 { 8953 int printed; 8954 u_int printed_mask; 8955 u_int dummy_column; 8956 8957 if (cur_column == NULL) { 8958 dummy_column = 0; 8959 cur_column = &dummy_column; 8960 } 8961 8962 if (cur_column != NULL && *cur_column >= wrap_point) { 8963 printf("\n"); 8964 *cur_column = 0; 8965 } 8966 printed = printf("%s[0x%x]", name, value); 8967 if (table == NULL) { 8968 printed += printf(" "); 8969 *cur_column += printed; 8970 return (printed); 8971 } 8972 printed_mask = 0; 8973 while (printed_mask != 0xFF) { 8974 int entry; 8975 8976 for (entry = 0; entry < num_entries; entry++) { 8977 if (((value & table[entry].mask) 8978 != table[entry].value) 8979 || ((printed_mask & table[entry].mask) 8980 == table[entry].mask)) 8981 continue; 8982 8983 printed += printf("%s%s", 8984 printed_mask == 0 ? ":(" : "|", 8985 table[entry].name); 8986 printed_mask |= table[entry].mask; 8987 8988 break; 8989 } 8990 if (entry >= num_entries) 8991 break; 8992 } 8993 if (printed_mask != 0) 8994 printed += printf(") "); 8995 else 8996 printed += printf(" "); 8997 *cur_column += printed; 8998 return (printed); 8999 } 9000 9001 void 9002 ahd_dump_card_state(struct ahd_softc *ahd) 9003 { 9004 struct scb *scb; 9005 ahd_mode_state saved_modes; 9006 u_int dffstat; 9007 int paused; 9008 u_int scb_index; 9009 u_int saved_scb_index; 9010 u_int cur_col; 9011 int i; 9012 9013 if (ahd_is_paused(ahd)) { 9014 paused = 1; 9015 } else { 9016 paused = 0; 9017 ahd_pause(ahd); 9018 } 9019 saved_modes = ahd_save_modes(ahd); 9020 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 9021 printf(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n" 9022 "%s: Dumping Card State at program address 0x%x Mode 0x%x\n", 9023 ahd_name(ahd), 9024 ahd_inw(ahd, CURADDR), 9025 ahd_build_mode_state(ahd, ahd->saved_src_mode, 9026 ahd->saved_dst_mode)); 9027 if (paused) 9028 printf("Card was paused\n"); 9029 9030 if (ahd_check_cmdcmpltqueues(ahd)) 9031 printf("Completions are pending\n"); 9032 9033 /* 9034 * Mode independent registers. 9035 */ 9036 cur_col = 0; 9037 ahd_intstat_print(ahd_inb(ahd, INTSTAT), &cur_col, 50); 9038 ahd_seloid_print(ahd_inb(ahd, SELOID), &cur_col, 50); 9039 ahd_selid_print(ahd_inb(ahd, SELID), &cur_col, 50); 9040 ahd_hs_mailbox_print(ahd_inb(ahd, LOCAL_HS_MAILBOX), &cur_col, 50); 9041 ahd_intctl_print(ahd_inb(ahd, INTCTL), &cur_col, 50); 9042 ahd_seqintstat_print(ahd_inb(ahd, SEQINTSTAT), &cur_col, 50); 9043 ahd_saved_mode_print(ahd_inb(ahd, SAVED_MODE), &cur_col, 50); 9044 ahd_dffstat_print(ahd_inb(ahd, DFFSTAT), &cur_col, 50); 9045 ahd_scsisigi_print(ahd_inb(ahd, SCSISIGI), &cur_col, 50); 9046 ahd_scsiphase_print(ahd_inb(ahd, SCSIPHASE), &cur_col, 50); 9047 ahd_scsibus_print(ahd_inb(ahd, SCSIBUS), &cur_col, 50); 9048 ahd_lastphase_print(ahd_inb(ahd, LASTPHASE), &cur_col, 50); 9049 ahd_scsiseq0_print(ahd_inb(ahd, SCSISEQ0), &cur_col, 50); 9050 ahd_scsiseq1_print(ahd_inb(ahd, SCSISEQ1), &cur_col, 50); 9051 ahd_seqctl0_print(ahd_inb(ahd, SEQCTL0), &cur_col, 50); 9052 ahd_seqintctl_print(ahd_inb(ahd, SEQINTCTL), &cur_col, 50); 9053 ahd_seq_flags_print(ahd_inb(ahd, SEQ_FLAGS), &cur_col, 50); 9054 ahd_seq_flags2_print(ahd_inb(ahd, SEQ_FLAGS2), &cur_col, 50); 9055 ahd_qfreeze_count_print(ahd_inw(ahd, QFREEZE_COUNT), &cur_col, 50); 9056 ahd_kernel_qfreeze_count_print(ahd_inw(ahd, KERNEL_QFREEZE_COUNT), 9057 &cur_col, 50); 9058 ahd_mk_message_scb_print(ahd_inw(ahd, MK_MESSAGE_SCB), &cur_col, 50); 9059 ahd_mk_message_scsiid_print(ahd_inb(ahd, MK_MESSAGE_SCSIID), 9060 &cur_col, 50); 9061 ahd_sstat0_print(ahd_inb(ahd, SSTAT0), &cur_col, 50); 9062 ahd_sstat1_print(ahd_inb(ahd, SSTAT1), &cur_col, 50); 9063 ahd_sstat2_print(ahd_inb(ahd, SSTAT2), &cur_col, 50); 9064 ahd_sstat3_print(ahd_inb(ahd, SSTAT3), &cur_col, 50); 9065 ahd_perrdiag_print(ahd_inb(ahd, PERRDIAG), &cur_col, 50); 9066 ahd_simode1_print(ahd_inb(ahd, SIMODE1), &cur_col, 50); 9067 ahd_lqistat0_print(ahd_inb(ahd, LQISTAT0), &cur_col, 50); 9068 ahd_lqistat1_print(ahd_inb(ahd, LQISTAT1), &cur_col, 50); 9069 ahd_lqistat2_print(ahd_inb(ahd, LQISTAT2), &cur_col, 50); 9070 ahd_lqostat0_print(ahd_inb(ahd, LQOSTAT0), &cur_col, 50); 9071 ahd_lqostat1_print(ahd_inb(ahd, LQOSTAT1), &cur_col, 50); 9072 ahd_lqostat2_print(ahd_inb(ahd, LQOSTAT2), &cur_col, 50); 9073 printf("\n"); 9074 printf("\nSCB Count = %d CMDS_PENDING = %d LASTSCB 0x%x " 9075 "CURRSCB 0x%x NEXTSCB 0x%x\n", 9076 ahd->scb_data.numscbs, ahd_inw(ahd, CMDS_PENDING), 9077 ahd_inw(ahd, LASTSCB), ahd_inw(ahd, CURRSCB), 9078 ahd_inw(ahd, NEXTSCB)); 9079 cur_col = 0; 9080 /* QINFIFO */ 9081 ahd_search_qinfifo(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS, 9082 CAM_LUN_WILDCARD, SCB_LIST_NULL, 9083 ROLE_UNKNOWN, /*status*/0, SEARCH_PRINT); 9084 saved_scb_index = ahd_get_scbptr(ahd); 9085 printf("Pending list:"); 9086 i = 0; 9087 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 9088 if (i++ > AHD_SCB_MAX) 9089 break; 9090 cur_col = printf("\n%3d FIFO_USE[0x%x] ", SCB_GET_TAG(scb), 9091 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT)); 9092 ahd_set_scbptr(ahd, SCB_GET_TAG(scb)); 9093 ahd_scb_control_print(ahd_inb_scbram(ahd, SCB_CONTROL), 9094 &cur_col, 60); 9095 ahd_scb_scsiid_print(ahd_inb_scbram(ahd, SCB_SCSIID), 9096 &cur_col, 60); 9097 } 9098 printf("\nTotal %d\n", i); 9099 9100 printf("Kernel Free SCB lists: "); 9101 i = 0; 9102 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 9103 struct scb *list_scb; 9104 9105 printf("\n COLIDX[%d]: ", AHD_GET_SCB_COL_IDX(ahd, scb)); 9106 list_scb = scb; 9107 do { 9108 printf("%d ", SCB_GET_TAG(list_scb)); 9109 list_scb = LIST_NEXT(list_scb, collision_links); 9110 } while (list_scb && i++ < AHD_SCB_MAX); 9111 } 9112 9113 printf("\n Any Device: "); 9114 LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) { 9115 if (i++ > AHD_SCB_MAX) 9116 break; 9117 printf("%d ", SCB_GET_TAG(scb)); 9118 } 9119 printf("\n"); 9120 9121 printf("Sequencer Complete DMA-inprog list: "); 9122 scb_index = ahd_inw(ahd, COMPLETE_SCB_DMAINPROG_HEAD); 9123 i = 0; 9124 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9125 ahd_set_scbptr(ahd, scb_index); 9126 printf("%d ", scb_index); 9127 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9128 } 9129 printf("\n"); 9130 9131 printf("Sequencer Complete list: "); 9132 scb_index = ahd_inw(ahd, COMPLETE_SCB_HEAD); 9133 i = 0; 9134 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9135 ahd_set_scbptr(ahd, scb_index); 9136 printf("%d ", scb_index); 9137 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9138 } 9139 printf("\n"); 9140 9141 9142 printf("Sequencer DMA-Up and Complete list: "); 9143 scb_index = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 9144 i = 0; 9145 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9146 ahd_set_scbptr(ahd, scb_index); 9147 printf("%d ", scb_index); 9148 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9149 } 9150 printf("\n"); 9151 printf("Sequencer On QFreeze and Complete list: "); 9152 scb_index = ahd_inw(ahd, COMPLETE_ON_QFREEZE_HEAD); 9153 i = 0; 9154 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9155 ahd_set_scbptr(ahd, scb_index); 9156 printf("%d ", scb_index); 9157 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9158 } 9159 printf("\n"); 9160 ahd_set_scbptr(ahd, saved_scb_index); 9161 dffstat = ahd_inb(ahd, DFFSTAT); 9162 for (i = 0; i < 2; i++) { 9163 #ifdef AHD_DEBUG 9164 struct scb *fifo_scb; 9165 #endif 9166 u_int fifo_scbptr; 9167 9168 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i); 9169 fifo_scbptr = ahd_get_scbptr(ahd); 9170 printf("\n\n%s: FIFO%d %s, LONGJMP == 0x%x, SCB 0x%x\n", 9171 ahd_name(ahd), i, 9172 (dffstat & (FIFO0FREE << i)) ? "Free" : "Active", 9173 ahd_inw(ahd, LONGJMP_ADDR), fifo_scbptr); 9174 cur_col = 0; 9175 ahd_seqimode_print(ahd_inb(ahd, SEQIMODE), &cur_col, 50); 9176 ahd_seqintsrc_print(ahd_inb(ahd, SEQINTSRC), &cur_col, 50); 9177 ahd_dfcntrl_print(ahd_inb(ahd, DFCNTRL), &cur_col, 50); 9178 ahd_dfstatus_print(ahd_inb(ahd, DFSTATUS), &cur_col, 50); 9179 ahd_sg_cache_shadow_print(ahd_inb(ahd, SG_CACHE_SHADOW), 9180 &cur_col, 50); 9181 ahd_sg_state_print(ahd_inb(ahd, SG_STATE), &cur_col, 50); 9182 ahd_dffsxfrctl_print(ahd_inb(ahd, DFFSXFRCTL), &cur_col, 50); 9183 ahd_soffcnt_print(ahd_inb(ahd, SOFFCNT), &cur_col, 50); 9184 ahd_mdffstat_print(ahd_inb(ahd, MDFFSTAT), &cur_col, 50); 9185 if (cur_col > 50) { 9186 printf("\n"); 9187 cur_col = 0; 9188 } 9189 cur_col += printf("SHADDR = 0x%x%x, SHCNT = 0x%x ", 9190 ahd_inl(ahd, SHADDR+4), 9191 ahd_inl(ahd, SHADDR), 9192 (ahd_inb(ahd, SHCNT) 9193 | (ahd_inb(ahd, SHCNT + 1) << 8) 9194 | (ahd_inb(ahd, SHCNT + 2) << 16))); 9195 if (cur_col > 50) { 9196 printf("\n"); 9197 cur_col = 0; 9198 } 9199 cur_col += printf("HADDR = 0x%x%x, HCNT = 0x%x ", 9200 ahd_inl(ahd, HADDR+4), 9201 ahd_inl(ahd, HADDR), 9202 (ahd_inb(ahd, HCNT) 9203 | (ahd_inb(ahd, HCNT + 1) << 8) 9204 | (ahd_inb(ahd, HCNT + 2) << 16))); 9205 ahd_ccsgctl_print(ahd_inb(ahd, CCSGCTL), &cur_col, 50); 9206 #ifdef AHD_DEBUG 9207 if ((ahd_debug & AHD_SHOW_SG) != 0) { 9208 fifo_scb = ahd_lookup_scb(ahd, fifo_scbptr); 9209 if (fifo_scb != NULL) 9210 ahd_dump_sglist(fifo_scb); 9211 } 9212 #endif 9213 } 9214 printf("\nLQIN: "); 9215 for (i = 0; i < 20; i++) 9216 printf("0x%x ", ahd_inb(ahd, LQIN + i)); 9217 printf("\n"); 9218 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 9219 printf("%s: LQISTATE = 0x%x, LQOSTATE = 0x%x, OPTIONMODE = 0x%x\n", 9220 ahd_name(ahd), ahd_inb(ahd, LQISTATE), ahd_inb(ahd, LQOSTATE), 9221 ahd_inb(ahd, OPTIONMODE)); 9222 printf("%s: OS_SPACE_CNT = 0x%x MAXCMDCNT = 0x%x\n", 9223 ahd_name(ahd), ahd_inb(ahd, OS_SPACE_CNT), 9224 ahd_inb(ahd, MAXCMDCNT)); 9225 printf("%s: SAVED_SCSIID = 0x%x SAVED_LUN = 0x%x\n", 9226 ahd_name(ahd), ahd_inb(ahd, SAVED_SCSIID), 9227 ahd_inb(ahd, SAVED_LUN)); 9228 ahd_simode0_print(ahd_inb(ahd, SIMODE0), &cur_col, 50); 9229 printf("\n"); 9230 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 9231 cur_col = 0; 9232 ahd_ccscbctl_print(ahd_inb(ahd, CCSCBCTL), &cur_col, 50); 9233 printf("\n"); 9234 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode); 9235 printf("%s: REG0 == 0x%x, SINDEX = 0x%x, DINDEX = 0x%x\n", 9236 ahd_name(ahd), ahd_inw(ahd, REG0), ahd_inw(ahd, SINDEX), 9237 ahd_inw(ahd, DINDEX)); 9238 printf("%s: SCBPTR == 0x%x, SCB_NEXT == 0x%x, SCB_NEXT2 == 0x%x\n", 9239 ahd_name(ahd), ahd_get_scbptr(ahd), 9240 ahd_inw_scbram(ahd, SCB_NEXT), 9241 ahd_inw_scbram(ahd, SCB_NEXT2)); 9242 printf("CDB %x %x %x %x %x %x\n", 9243 ahd_inb_scbram(ahd, SCB_CDB_STORE), 9244 ahd_inb_scbram(ahd, SCB_CDB_STORE+1), 9245 ahd_inb_scbram(ahd, SCB_CDB_STORE+2), 9246 ahd_inb_scbram(ahd, SCB_CDB_STORE+3), 9247 ahd_inb_scbram(ahd, SCB_CDB_STORE+4), 9248 ahd_inb_scbram(ahd, SCB_CDB_STORE+5)); 9249 printf("STACK:"); 9250 for (i = 0; i < ahd->stack_size; i++) { 9251 ahd->saved_stack[i] = 9252 ahd_inb(ahd, STACK)|(ahd_inb(ahd, STACK) << 8); 9253 printf(" 0x%x", ahd->saved_stack[i]); 9254 } 9255 for (i = ahd->stack_size-1; i >= 0; i--) { 9256 ahd_outb(ahd, STACK, ahd->saved_stack[i] & 0xFF); 9257 ahd_outb(ahd, STACK, (ahd->saved_stack[i] >> 8) & 0xFF); 9258 } 9259 printf("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n"); 9260 ahd_platform_dump_card_state(ahd); 9261 ahd_restore_modes(ahd, saved_modes); 9262 if (paused == 0) 9263 ahd_unpause(ahd); 9264 } 9265 9266 void 9267 ahd_dump_scbs(struct ahd_softc *ahd) 9268 { 9269 ahd_mode_state saved_modes; 9270 u_int saved_scb_index; 9271 int i; 9272 9273 saved_modes = ahd_save_modes(ahd); 9274 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 9275 saved_scb_index = ahd_get_scbptr(ahd); 9276 for (i = 0; i < AHD_SCB_MAX; i++) { 9277 ahd_set_scbptr(ahd, i); 9278 printf("%3d", i); 9279 printf("(CTRL 0x%x ID 0x%x N 0x%x N2 0x%x SG 0x%x, RSG 0x%x)\n", 9280 ahd_inb_scbram(ahd, SCB_CONTROL), 9281 ahd_inb_scbram(ahd, SCB_SCSIID), 9282 ahd_inw_scbram(ahd, SCB_NEXT), 9283 ahd_inw_scbram(ahd, SCB_NEXT2), 9284 ahd_inl_scbram(ahd, SCB_SGPTR), 9285 ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR)); 9286 } 9287 printf("\n"); 9288 ahd_set_scbptr(ahd, saved_scb_index); 9289 ahd_restore_modes(ahd, saved_modes); 9290 } 9291 9292 9293 /*************************** Timeout Handling *********************************/ 9294 void 9295 ahd_timeout(struct scb *scb) 9296 { 9297 struct ahd_softc *ahd; 9298 9299 ahd = scb->ahd_softc; 9300 if ((scb->flags & SCB_ACTIVE) != 0) { 9301 if ((scb->flags & SCB_TIMEDOUT) == 0) { 9302 LIST_INSERT_HEAD(&ahd->timedout_scbs, scb, 9303 timedout_links); 9304 scb->flags |= SCB_TIMEDOUT; 9305 } 9306 ahd_wakeup_recovery_thread(ahd); 9307 } 9308 } 9309 9310 /* 9311 * ahd_recover_commands determines if any of the commands that have currently 9312 * timedout are the root cause for this timeout. Innocent commands are given 9313 * a new timeout while we wait for the command executing on the bus to timeout. 9314 * This routine is invoked from a thread context so we are allowed to sleep. 9315 * Our lock is not held on entry. 9316 */ 9317 void 9318 ahd_recover_commands(struct ahd_softc *ahd) 9319 { 9320 struct scb *scb; 9321 struct scb *active_scb; 9322 int found; 9323 int was_paused; 9324 u_int active_scbptr; 9325 u_int last_phase; 9326 9327 /* 9328 * Pause the controller and manually flush any 9329 * commands that have just completed but that our 9330 * interrupt handler has yet to see. 9331 */ 9332 was_paused = ahd_is_paused(ahd); 9333 9334 printf("%s: Recovery Initiated - Card was %spaused\n", ahd_name(ahd), 9335 was_paused ? "" : "not "); 9336 AHD_CORRECTABLE_ERROR(ahd); 9337 ahd_dump_card_state(ahd); 9338 9339 ahd_pause_and_flushwork(ahd); 9340 9341 if (LIST_EMPTY(&ahd->timedout_scbs) != 0) { 9342 /* 9343 * The timedout commands have already 9344 * completed. This typically means 9345 * that either the timeout value was on 9346 * the hairy edge of what the device 9347 * requires or - more likely - interrupts 9348 * are not happening. 9349 */ 9350 printf("%s: Timedout SCBs already complete. " 9351 "Interrupts may not be functioning.\n", ahd_name(ahd)); 9352 ahd_unpause(ahd); 9353 return; 9354 } 9355 9356 /* 9357 * Determine identity of SCB acting on the bus. 9358 * This test only catches non-packetized transactions. 9359 * Due to the fleeting nature of packetized operations, 9360 * we can't easily determine that a packetized operation 9361 * is on the bus. 9362 */ 9363 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 9364 last_phase = ahd_inb(ahd, LASTPHASE); 9365 active_scbptr = ahd_get_scbptr(ahd); 9366 active_scb = NULL; 9367 if (last_phase != P_BUSFREE 9368 || (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0) 9369 active_scb = ahd_lookup_scb(ahd, active_scbptr); 9370 9371 while ((scb = LIST_FIRST(&ahd->timedout_scbs)) != NULL) { 9372 int target; 9373 int lun; 9374 char channel; 9375 9376 target = SCB_GET_TARGET(ahd, scb); 9377 channel = SCB_GET_CHANNEL(ahd, scb); 9378 lun = SCB_GET_LUN(scb); 9379 9380 ahd_print_path(ahd, scb); 9381 printf("SCB %d - timed out\n", SCB_GET_TAG(scb)); 9382 9383 if (scb->flags & (SCB_DEVICE_RESET|SCB_ABORT)) { 9384 /* 9385 * Been down this road before. 9386 * Do a full bus reset. 9387 */ 9388 aic_set_transaction_status(scb, CAM_CMD_TIMEOUT); 9389 bus_reset: 9390 found = ahd_reset_channel(ahd, channel, 9391 /*Initiate Reset*/TRUE); 9392 printf("%s: Issued Channel %c Bus Reset. " 9393 "%d SCBs aborted\n", ahd_name(ahd), channel, 9394 found); 9395 continue; 9396 } 9397 9398 /* 9399 * Remove the command from the timedout list in 9400 * preparation for requeing it. 9401 */ 9402 LIST_REMOVE(scb, timedout_links); 9403 scb->flags &= ~SCB_TIMEDOUT; 9404 9405 if (active_scb != NULL) { 9406 9407 if (active_scb != scb) { 9408 9409 /* 9410 * If the active SCB is not us, assume that 9411 * the active SCB has a longer timeout than 9412 * the timedout SCB, and wait for the active 9413 * SCB to timeout. As a safeguard, only 9414 * allow this deferral to continue if some 9415 * untimed-out command is outstanding. 9416 */ 9417 if (ahd_other_scb_timeout(ahd, scb, 9418 active_scb) == 0) 9419 goto bus_reset; 9420 continue; 9421 } 9422 9423 /* 9424 * We're active on the bus, so assert ATN 9425 * and hope that the target responds. 9426 */ 9427 ahd_set_recoveryscb(ahd, active_scb); 9428 active_scb->flags |= SCB_RECOVERY_SCB|SCB_DEVICE_RESET; 9429 ahd_outb(ahd, MSG_OUT, HOST_MSG); 9430 ahd_outb(ahd, SCSISIGO, last_phase|ATNO); 9431 ahd_print_path(ahd, active_scb); 9432 printf("BDR message in message buffer\n"); 9433 aic_scb_timer_reset(scb, 2 * 1000); 9434 break; 9435 } else if (last_phase != P_BUSFREE 9436 && ahd_inb(ahd, SCSIPHASE) == 0) { 9437 /* 9438 * SCB is not identified, there 9439 * is no pending REQ, and the sequencer 9440 * has not seen a busfree. Looks like 9441 * a stuck connection waiting to 9442 * go busfree. Reset the bus. 9443 */ 9444 printf("%s: Connection stuck awaiting busfree or " 9445 "Identify Msg.\n", ahd_name(ahd)); 9446 goto bus_reset; 9447 } else if (ahd_search_qinfifo(ahd, target, channel, lun, 9448 SCB_GET_TAG(scb), 9449 ROLE_INITIATOR, /*status*/0, 9450 SEARCH_COUNT) > 0) { 9451 9452 /* 9453 * We haven't even gone out on the bus 9454 * yet, so the timeout must be due to 9455 * some other command. Reset the timer 9456 * and go on. 9457 */ 9458 if (ahd_other_scb_timeout(ahd, scb, NULL) == 0) 9459 goto bus_reset; 9460 } else { 9461 /* 9462 * This SCB is for a disconnected transaction 9463 * and we haven't found a better candidate on 9464 * the bus to explain this timeout. 9465 */ 9466 ahd_set_recoveryscb(ahd, scb); 9467 9468 /* 9469 * Actually re-queue this SCB in an attempt 9470 * to select the device before it reconnects. 9471 * In either case (selection or reselection), 9472 * we will now issue a target reset to the 9473 * timed-out device. 9474 */ 9475 scb->flags |= SCB_DEVICE_RESET; 9476 scb->hscb->cdb_len = 0; 9477 scb->hscb->task_attribute = 0; 9478 scb->hscb->task_management = SIU_TASKMGMT_ABORT_TASK; 9479 9480 ahd_set_scbptr(ahd, SCB_GET_TAG(scb)); 9481 if ((scb->flags & SCB_PACKETIZED) != 0) { 9482 /* 9483 * Mark the SCB has having an outstanding 9484 * task management function. Should the command 9485 * complete normally before the task management 9486 * function can be sent, the host will be 9487 * notified to abort our requeued SCB. 9488 */ 9489 ahd_outb(ahd, SCB_TASK_MANAGEMENT, 9490 scb->hscb->task_management); 9491 } else { 9492 /* 9493 * If non-packetized, set the MK_MESSAGE control 9494 * bit indicating that we desire to send a 9495 * message. We also set the disconnected flag 9496 * since there is no guarantee that our SCB 9497 * control byte matches the version on the 9498 * card. We don't want the sequencer to abort 9499 * the command thinking an unsolicited 9500 * reselection occurred. 9501 */ 9502 scb->hscb->control |= MK_MESSAGE|DISCONNECTED; 9503 9504 /* 9505 * The sequencer will never re-reference the 9506 * in-core SCB. To make sure we are notified 9507 * during reslection, set the MK_MESSAGE flag in 9508 * the card's copy of the SCB. 9509 */ 9510 ahd_outb(ahd, SCB_CONTROL, 9511 ahd_inb(ahd, SCB_CONTROL)|MK_MESSAGE); 9512 } 9513 9514 /* 9515 * Clear out any entries in the QINFIFO first 9516 * so we are the next SCB for this target 9517 * to run. 9518 */ 9519 ahd_search_qinfifo(ahd, target, channel, lun, 9520 SCB_LIST_NULL, ROLE_INITIATOR, 9521 CAM_REQUEUE_REQ, SEARCH_COMPLETE); 9522 ahd_qinfifo_requeue_tail(ahd, scb); 9523 ahd_set_scbptr(ahd, active_scbptr); 9524 ahd_print_path(ahd, scb); 9525 printf("Queuing a BDR SCB\n"); 9526 aic_scb_timer_reset(scb, 2 * 1000); 9527 break; 9528 } 9529 } 9530 9531 /* 9532 * Any remaining SCBs were not the "culprit", so remove 9533 * them from the timeout list. The timer for these commands 9534 * will be reset once the recovery SCB completes. 9535 */ 9536 while ((scb = LIST_FIRST(&ahd->timedout_scbs)) != NULL) { 9537 9538 LIST_REMOVE(scb, timedout_links); 9539 scb->flags &= ~SCB_TIMEDOUT; 9540 } 9541 9542 ahd_unpause(ahd); 9543 } 9544 9545 /* 9546 * Re-schedule a timeout for the passed in SCB if we determine that some 9547 * other SCB is in the process of recovery or an SCB with a longer 9548 * timeout is still pending. Limit our search to just "other_scb" 9549 * if it is non-NULL. 9550 */ 9551 static int 9552 ahd_other_scb_timeout(struct ahd_softc *ahd, struct scb *scb, 9553 struct scb *other_scb) 9554 { 9555 u_int newtimeout; 9556 int found; 9557 9558 ahd_print_path(ahd, scb); 9559 printf("Other SCB Timeout%s", 9560 (scb->flags & SCB_OTHERTCL_TIMEOUT) != 0 9561 ? " again\n" : "\n"); 9562 9563 AHD_UNCORRECTABLE_ERROR(ahd); 9564 newtimeout = aic_get_timeout(scb); 9565 scb->flags |= SCB_OTHERTCL_TIMEOUT; 9566 found = 0; 9567 if (other_scb != NULL) { 9568 if ((other_scb->flags 9569 & (SCB_OTHERTCL_TIMEOUT|SCB_TIMEDOUT)) == 0 9570 || (other_scb->flags & SCB_RECOVERY_SCB) != 0) { 9571 found++; 9572 newtimeout = MAX(aic_get_timeout(other_scb), 9573 newtimeout); 9574 } 9575 } else { 9576 LIST_FOREACH(other_scb, &ahd->pending_scbs, pending_links) { 9577 if ((other_scb->flags 9578 & (SCB_OTHERTCL_TIMEOUT|SCB_TIMEDOUT)) == 0 9579 || (other_scb->flags & SCB_RECOVERY_SCB) != 0) { 9580 found++; 9581 newtimeout = MAX(aic_get_timeout(other_scb), 9582 newtimeout); 9583 } 9584 } 9585 } 9586 9587 if (found != 0) 9588 aic_scb_timer_reset(scb, newtimeout); 9589 else { 9590 ahd_print_path(ahd, scb); 9591 printf("No other SCB worth waiting for...\n"); 9592 } 9593 9594 return (found != 0); 9595 } 9596 9597 /**************************** Flexport Logic **********************************/ 9598 /* 9599 * Read count 16bit words from 16bit word address start_addr from the 9600 * SEEPROM attached to the controller, into buf, using the controller's 9601 * SEEPROM reading state machine. Optionally treat the data as a byte 9602 * stream in terms of byte order. 9603 */ 9604 int 9605 ahd_read_seeprom(struct ahd_softc *ahd, uint16_t *buf, 9606 u_int start_addr, u_int count, int bytestream) 9607 { 9608 u_int cur_addr; 9609 u_int end_addr; 9610 int error; 9611 9612 /* 9613 * If we never make it through the loop even once, 9614 * we were passed invalid arguments. 9615 */ 9616 error = EINVAL; 9617 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9618 end_addr = start_addr + count; 9619 for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) { 9620 9621 ahd_outb(ahd, SEEADR, cur_addr); 9622 ahd_outb(ahd, SEECTL, SEEOP_READ | SEESTART); 9623 9624 error = ahd_wait_seeprom(ahd); 9625 if (error) 9626 break; 9627 if (bytestream != 0) { 9628 uint8_t *bytestream_ptr; 9629 9630 bytestream_ptr = (uint8_t *)buf; 9631 *bytestream_ptr++ = ahd_inb(ahd, SEEDAT); 9632 *bytestream_ptr = ahd_inb(ahd, SEEDAT+1); 9633 } else { 9634 /* 9635 * ahd_inw() already handles machine byte order. 9636 */ 9637 *buf = ahd_inw(ahd, SEEDAT); 9638 } 9639 buf++; 9640 } 9641 return (error); 9642 } 9643 9644 /* 9645 * Write count 16bit words from buf, into SEEPROM attache to the 9646 * controller starting at 16bit word address start_addr, using the 9647 * controller's SEEPROM writing state machine. 9648 */ 9649 int 9650 ahd_write_seeprom(struct ahd_softc *ahd, uint16_t *buf, 9651 u_int start_addr, u_int count) 9652 { 9653 u_int cur_addr; 9654 u_int end_addr; 9655 int error; 9656 int retval; 9657 9658 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9659 error = ENOENT; 9660 9661 /* Place the chip into write-enable mode */ 9662 ahd_outb(ahd, SEEADR, SEEOP_EWEN_ADDR); 9663 ahd_outb(ahd, SEECTL, SEEOP_EWEN | SEESTART); 9664 error = ahd_wait_seeprom(ahd); 9665 if (error) 9666 return (error); 9667 9668 /* 9669 * Write the data. If we don't get through the loop at 9670 * least once, the arguments were invalid. 9671 */ 9672 retval = EINVAL; 9673 end_addr = start_addr + count; 9674 for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) { 9675 ahd_outw(ahd, SEEDAT, *buf++); 9676 ahd_outb(ahd, SEEADR, cur_addr); 9677 ahd_outb(ahd, SEECTL, SEEOP_WRITE | SEESTART); 9678 9679 retval = ahd_wait_seeprom(ahd); 9680 if (retval) 9681 break; 9682 } 9683 9684 /* 9685 * Disable writes. 9686 */ 9687 ahd_outb(ahd, SEEADR, SEEOP_EWDS_ADDR); 9688 ahd_outb(ahd, SEECTL, SEEOP_EWDS | SEESTART); 9689 error = ahd_wait_seeprom(ahd); 9690 if (error) 9691 return (error); 9692 return (retval); 9693 } 9694 9695 /* 9696 * Wait ~100us for the serial eeprom to satisfy our request. 9697 */ 9698 int 9699 ahd_wait_seeprom(struct ahd_softc *ahd) 9700 { 9701 int cnt; 9702 9703 cnt = 5000; 9704 while ((ahd_inb(ahd, SEESTAT) & (SEEARBACK|SEEBUSY)) != 0 && --cnt) 9705 aic_delay(5); 9706 9707 if (cnt == 0) 9708 return (ETIMEDOUT); 9709 return (0); 9710 } 9711 9712 /* 9713 * Validate the two checksums in the per_channel 9714 * vital product data struct. 9715 */ 9716 int 9717 ahd_verify_vpd_cksum(struct vpd_config *vpd) 9718 { 9719 int i; 9720 int maxaddr; 9721 uint32_t checksum; 9722 uint8_t *vpdarray; 9723 9724 vpdarray = (uint8_t *)vpd; 9725 maxaddr = offsetof(struct vpd_config, vpd_checksum); 9726 checksum = 0; 9727 for (i = offsetof(struct vpd_config, resource_type); i < maxaddr; i++) 9728 checksum = checksum + vpdarray[i]; 9729 if (checksum == 0 9730 || (-checksum & 0xFF) != vpd->vpd_checksum) 9731 return (0); 9732 9733 checksum = 0; 9734 maxaddr = offsetof(struct vpd_config, checksum); 9735 for (i = offsetof(struct vpd_config, default_target_flags); 9736 i < maxaddr; i++) 9737 checksum = checksum + vpdarray[i]; 9738 if (checksum == 0 9739 || (-checksum & 0xFF) != vpd->checksum) 9740 return (0); 9741 return (1); 9742 } 9743 9744 int 9745 ahd_verify_cksum(struct seeprom_config *sc) 9746 { 9747 int i; 9748 int maxaddr; 9749 uint32_t checksum; 9750 uint16_t *scarray; 9751 9752 maxaddr = (sizeof(*sc)/2) - 1; 9753 checksum = 0; 9754 scarray = (uint16_t *)sc; 9755 9756 for (i = 0; i < maxaddr; i++) 9757 checksum = checksum + scarray[i]; 9758 if (checksum == 0 9759 || (checksum & 0xFFFF) != sc->checksum) { 9760 return (0); 9761 } else { 9762 return (1); 9763 } 9764 } 9765 9766 int 9767 ahd_acquire_seeprom(struct ahd_softc *ahd) 9768 { 9769 /* 9770 * We should be able to determine the SEEPROM type 9771 * from the flexport logic, but unfortunately not 9772 * all implementations have this logic and there is 9773 * no programatic method for determining if the logic 9774 * is present. 9775 */ 9776 return (1); 9777 #if 0 9778 uint8_t seetype; 9779 int error; 9780 9781 error = ahd_read_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, &seetype); 9782 if (error != 0 9783 || ((seetype & FLX_ROMSTAT_SEECFG) == FLX_ROMSTAT_SEE_NONE)) 9784 return (0); 9785 return (1); 9786 #endif 9787 } 9788 9789 void 9790 ahd_release_seeprom(struct ahd_softc *ahd) 9791 { 9792 /* Currently a no-op */ 9793 } 9794 9795 int 9796 ahd_write_flexport(struct ahd_softc *ahd, u_int addr, u_int value) 9797 { 9798 int error; 9799 9800 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9801 if (addr > 7) 9802 panic("ahd_write_flexport: address out of range"); 9803 ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3)); 9804 error = ahd_wait_flexport(ahd); 9805 if (error != 0) 9806 return (error); 9807 ahd_outb(ahd, BRDDAT, value); 9808 ahd_flush_device_writes(ahd); 9809 ahd_outb(ahd, BRDCTL, BRDSTB|BRDEN|(addr << 3)); 9810 ahd_flush_device_writes(ahd); 9811 ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3)); 9812 ahd_flush_device_writes(ahd); 9813 ahd_outb(ahd, BRDCTL, 0); 9814 ahd_flush_device_writes(ahd); 9815 return (0); 9816 } 9817 9818 int 9819 ahd_read_flexport(struct ahd_softc *ahd, u_int addr, uint8_t *value) 9820 { 9821 int error; 9822 9823 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9824 if (addr > 7) 9825 panic("ahd_read_flexport: address out of range"); 9826 ahd_outb(ahd, BRDCTL, BRDRW|BRDEN|(addr << 3)); 9827 error = ahd_wait_flexport(ahd); 9828 if (error != 0) 9829 return (error); 9830 *value = ahd_inb(ahd, BRDDAT); 9831 ahd_outb(ahd, BRDCTL, 0); 9832 ahd_flush_device_writes(ahd); 9833 return (0); 9834 } 9835 9836 /* 9837 * Wait at most 2 seconds for flexport arbitration to succeed. 9838 */ 9839 int 9840 ahd_wait_flexport(struct ahd_softc *ahd) 9841 { 9842 int cnt; 9843 9844 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9845 cnt = 1000000 * 2 / 5; 9846 while ((ahd_inb(ahd, BRDCTL) & FLXARBACK) == 0 && --cnt) 9847 aic_delay(5); 9848 9849 if (cnt == 0) 9850 return (ETIMEDOUT); 9851 return (0); 9852 } 9853 9854 /************************* Target Mode ****************************************/ 9855 #ifdef AHD_TARGET_MODE 9856 cam_status 9857 ahd_find_tmode_devs(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb, 9858 struct ahd_tmode_tstate **tstate, 9859 struct ahd_tmode_lstate **lstate, 9860 int notfound_failure) 9861 { 9862 9863 if ((ahd->features & AHD_TARGETMODE) == 0) 9864 return (CAM_REQ_INVALID); 9865 9866 /* 9867 * Handle the 'black hole' device that sucks up 9868 * requests to unattached luns on enabled targets. 9869 */ 9870 if (ccb->ccb_h.target_id == CAM_TARGET_WILDCARD 9871 && ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) { 9872 *tstate = NULL; 9873 *lstate = ahd->black_hole; 9874 } else { 9875 u_int max_id; 9876 9877 max_id = (ahd->features & AHD_WIDE) ? 15 : 7; 9878 if (ccb->ccb_h.target_id > max_id) 9879 return (CAM_TID_INVALID); 9880 9881 if (ccb->ccb_h.target_lun >= AHD_NUM_LUNS) 9882 return (CAM_LUN_INVALID); 9883 9884 *tstate = ahd->enabled_targets[ccb->ccb_h.target_id]; 9885 *lstate = NULL; 9886 if (*tstate != NULL) 9887 *lstate = 9888 (*tstate)->enabled_luns[ccb->ccb_h.target_lun]; 9889 } 9890 9891 if (notfound_failure != 0 && *lstate == NULL) 9892 return (CAM_PATH_INVALID); 9893 9894 return (CAM_REQ_CMP); 9895 } 9896 9897 void 9898 ahd_handle_en_lun(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb) 9899 { 9900 #if NOT_YET 9901 struct ahd_tmode_tstate *tstate; 9902 struct ahd_tmode_lstate *lstate; 9903 struct ccb_en_lun *cel; 9904 cam_status status; 9905 u_int target; 9906 u_int lun; 9907 u_int target_mask; 9908 u_long s; 9909 char channel; 9910 9911 status = ahd_find_tmode_devs(ahd, sim, ccb, &tstate, &lstate, 9912 /*notfound_failure*/FALSE); 9913 9914 if (status != CAM_REQ_CMP) { 9915 ccb->ccb_h.status = status; 9916 return; 9917 } 9918 9919 if ((ahd->features & AHD_MULTIROLE) != 0) { 9920 u_int our_id; 9921 9922 our_id = ahd->our_id; 9923 if (ccb->ccb_h.target_id != our_id 9924 && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) { 9925 if ((ahd->features & AHD_MULTI_TID) != 0 9926 && (ahd->flags & AHD_INITIATORROLE) != 0) { 9927 /* 9928 * Only allow additional targets if 9929 * the initiator role is disabled. 9930 * The hardware cannot handle a re-select-in 9931 * on the initiator id during a re-select-out 9932 * on a different target id. 9933 */ 9934 status = CAM_TID_INVALID; 9935 } else if ((ahd->flags & AHD_INITIATORROLE) != 0 9936 || ahd->enabled_luns > 0) { 9937 /* 9938 * Only allow our target id to change 9939 * if the initiator role is not configured 9940 * and there are no enabled luns which 9941 * are attached to the currently registered 9942 * scsi id. 9943 */ 9944 status = CAM_TID_INVALID; 9945 } 9946 } 9947 } 9948 9949 if (status != CAM_REQ_CMP) { 9950 ccb->ccb_h.status = status; 9951 return; 9952 } 9953 9954 /* 9955 * We now have an id that is valid. 9956 * If we aren't in target mode, switch modes. 9957 */ 9958 if ((ahd->flags & AHD_TARGETROLE) == 0 9959 && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) { 9960 printf("Configuring Target Mode\n"); 9961 if (LIST_FIRST(&ahd->pending_scbs) != NULL) { 9962 ccb->ccb_h.status = CAM_BUSY; 9963 return; 9964 } 9965 ahd->flags |= AHD_TARGETROLE; 9966 if ((ahd->features & AHD_MULTIROLE) == 0) 9967 ahd->flags &= ~AHD_INITIATORROLE; 9968 ahd_pause(ahd); 9969 ahd_loadseq(ahd); 9970 ahd_restart(ahd); 9971 } 9972 cel = &ccb->cel; 9973 target = ccb->ccb_h.target_id; 9974 lun = ccb->ccb_h.target_lun; 9975 channel = SIM_CHANNEL(ahd, sim); 9976 target_mask = 0x01 << target; 9977 if (channel == 'B') 9978 target_mask <<= 8; 9979 9980 if (cel->enable != 0) { 9981 u_int scsiseq1; 9982 9983 /* Are we already enabled?? */ 9984 if (lstate != NULL) { 9985 xpt_print_path(ccb->ccb_h.path); 9986 printf("Lun already enabled\n"); 9987 AHD_CORRECTABLE_ERROR(ahd); 9988 ccb->ccb_h.status = CAM_LUN_ALRDY_ENA; 9989 return; 9990 } 9991 9992 if (cel->grp6_len != 0 9993 || cel->grp7_len != 0) { 9994 /* 9995 * Don't (yet?) support vendor 9996 * specific commands. 9997 */ 9998 ccb->ccb_h.status = CAM_REQ_INVALID; 9999 printf("Non-zero Group Codes\n"); 10000 return; 10001 } 10002 10003 /* 10004 * Seems to be okay. 10005 * Setup our data structures. 10006 */ 10007 if (target != CAM_TARGET_WILDCARD && tstate == NULL) { 10008 tstate = ahd_alloc_tstate(ahd, target, channel); 10009 if (tstate == NULL) { 10010 xpt_print_path(ccb->ccb_h.path); 10011 printf("Couldn't allocate tstate\n"); 10012 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 10013 return; 10014 } 10015 } 10016 lstate = malloc(sizeof(*lstate), M_DEVBUF, M_NOWAIT); 10017 if (lstate == NULL) { 10018 xpt_print_path(ccb->ccb_h.path); 10019 printf("Couldn't allocate lstate\n"); 10020 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 10021 return; 10022 } 10023 memset(lstate, 0, sizeof(*lstate)); 10024 status = xpt_create_path(&lstate->path, /*periph*/NULL, 10025 xpt_path_path_id(ccb->ccb_h.path), 10026 xpt_path_target_id(ccb->ccb_h.path), 10027 xpt_path_lun_id(ccb->ccb_h.path)); 10028 if (status != CAM_REQ_CMP) { 10029 free(lstate, M_DEVBUF); 10030 xpt_print_path(ccb->ccb_h.path); 10031 printf("Couldn't allocate path\n"); 10032 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 10033 return; 10034 } 10035 SLIST_INIT(&lstate->accept_tios); 10036 SLIST_INIT(&lstate->immed_notifies); 10037 ahd_pause(ahd); 10038 if (target != CAM_TARGET_WILDCARD) { 10039 tstate->enabled_luns[lun] = lstate; 10040 ahd->enabled_luns++; 10041 10042 if ((ahd->features & AHD_MULTI_TID) != 0) { 10043 u_int targid_mask; 10044 10045 targid_mask = ahd_inw(ahd, TARGID); 10046 targid_mask |= target_mask; 10047 ahd_outw(ahd, TARGID, targid_mask); 10048 ahd_update_scsiid(ahd, targid_mask); 10049 } else { 10050 u_int our_id; 10051 char channel; 10052 10053 channel = SIM_CHANNEL(ahd, sim); 10054 our_id = SIM_SCSI_ID(ahd, sim); 10055 10056 /* 10057 * This can only happen if selections 10058 * are not enabled 10059 */ 10060 if (target != our_id) { 10061 u_int sblkctl; 10062 char cur_channel; 10063 int swap; 10064 10065 sblkctl = ahd_inb(ahd, SBLKCTL); 10066 cur_channel = (sblkctl & SELBUSB) 10067 ? 'B' : 'A'; 10068 if ((ahd->features & AHD_TWIN) == 0) 10069 cur_channel = 'A'; 10070 swap = cur_channel != channel; 10071 ahd->our_id = target; 10072 10073 if (swap) 10074 ahd_outb(ahd, SBLKCTL, 10075 sblkctl ^ SELBUSB); 10076 10077 ahd_outb(ahd, SCSIID, target); 10078 10079 if (swap) 10080 ahd_outb(ahd, SBLKCTL, sblkctl); 10081 } 10082 } 10083 } else 10084 ahd->black_hole = lstate; 10085 /* Allow select-in operations */ 10086 if (ahd->black_hole != NULL && ahd->enabled_luns > 0) { 10087 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 10088 scsiseq1 |= ENSELI; 10089 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1); 10090 scsiseq1 = ahd_inb(ahd, SCSISEQ1); 10091 scsiseq1 |= ENSELI; 10092 ahd_outb(ahd, SCSISEQ1, scsiseq1); 10093 } 10094 ahd_unpause(ahd); 10095 ccb->ccb_h.status = CAM_REQ_CMP; 10096 xpt_print_path(ccb->ccb_h.path); 10097 printf("Lun now enabled for target mode\n"); 10098 } else { 10099 struct scb *scb; 10100 int i, empty; 10101 10102 if (lstate == NULL) { 10103 ccb->ccb_h.status = CAM_LUN_INVALID; 10104 return; 10105 } 10106 10107 ccb->ccb_h.status = CAM_REQ_CMP; 10108 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 10109 struct ccb_hdr *ccbh; 10110 10111 ccbh = &scb->io_ctx->ccb_h; 10112 if (ccbh->func_code == XPT_CONT_TARGET_IO 10113 && !xpt_path_comp(ccbh->path, ccb->ccb_h.path)){ 10114 printf("CTIO pending\n"); 10115 ccb->ccb_h.status = CAM_REQ_INVALID; 10116 return; 10117 } 10118 } 10119 10120 if (SLIST_FIRST(&lstate->accept_tios) != NULL) { 10121 printf("ATIOs pending\n"); 10122 ccb->ccb_h.status = CAM_REQ_INVALID; 10123 } 10124 10125 if (SLIST_FIRST(&lstate->immed_notifies) != NULL) { 10126 printf("INOTs pending\n"); 10127 ccb->ccb_h.status = CAM_REQ_INVALID; 10128 } 10129 10130 if (ccb->ccb_h.status != CAM_REQ_CMP) { 10131 return; 10132 } 10133 10134 xpt_print_path(ccb->ccb_h.path); 10135 printf("Target mode disabled\n"); 10136 xpt_free_path(lstate->path); 10137 free(lstate, M_DEVBUF); 10138 10139 ahd_pause(ahd); 10140 /* Can we clean up the target too? */ 10141 if (target != CAM_TARGET_WILDCARD) { 10142 tstate->enabled_luns[lun] = NULL; 10143 ahd->enabled_luns--; 10144 for (empty = 1, i = 0; i < 8; i++) 10145 if (tstate->enabled_luns[i] != NULL) { 10146 empty = 0; 10147 break; 10148 } 10149 10150 if (empty) { 10151 ahd_free_tstate(ahd, target, channel, 10152 /*force*/FALSE); 10153 if (ahd->features & AHD_MULTI_TID) { 10154 u_int targid_mask; 10155 10156 targid_mask = ahd_inw(ahd, TARGID); 10157 targid_mask &= ~target_mask; 10158 ahd_outw(ahd, TARGID, targid_mask); 10159 ahd_update_scsiid(ahd, targid_mask); 10160 } 10161 } 10162 } else { 10163 10164 ahd->black_hole = NULL; 10165 10166 /* 10167 * We can't allow selections without 10168 * our black hole device. 10169 */ 10170 empty = TRUE; 10171 } 10172 if (ahd->enabled_luns == 0) { 10173 /* Disallow select-in */ 10174 u_int scsiseq1; 10175 10176 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 10177 scsiseq1 &= ~ENSELI; 10178 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1); 10179 scsiseq1 = ahd_inb(ahd, SCSISEQ1); 10180 scsiseq1 &= ~ENSELI; 10181 ahd_outb(ahd, SCSISEQ1, scsiseq1); 10182 10183 if ((ahd->features & AHD_MULTIROLE) == 0) { 10184 printf("Configuring Initiator Mode\n"); 10185 ahd->flags &= ~AHD_TARGETROLE; 10186 ahd->flags |= AHD_INITIATORROLE; 10187 ahd_pause(ahd); 10188 ahd_loadseq(ahd); 10189 ahd_restart(ahd); 10190 /* 10191 * Unpaused. The extra unpause 10192 * that follows is harmless. 10193 */ 10194 } 10195 } 10196 ahd_unpause(ahd); 10197 } 10198 #endif 10199 } 10200 10201 static void 10202 ahd_update_scsiid(struct ahd_softc *ahd, u_int targid_mask) 10203 { 10204 #if NOT_YET 10205 u_int scsiid_mask; 10206 u_int scsiid; 10207 10208 if ((ahd->features & AHD_MULTI_TID) == 0) 10209 panic("ahd_update_scsiid called on non-multitid unit\n"); 10210 10211 /* 10212 * Since we will rely on the TARGID mask 10213 * for selection enables, ensure that OID 10214 * in SCSIID is not set to some other ID 10215 * that we don't want to allow selections on. 10216 */ 10217 if ((ahd->features & AHD_ULTRA2) != 0) 10218 scsiid = ahd_inb(ahd, SCSIID_ULTRA2); 10219 else 10220 scsiid = ahd_inb(ahd, SCSIID); 10221 scsiid_mask = 0x1 << (scsiid & OID); 10222 if ((targid_mask & scsiid_mask) == 0) { 10223 u_int our_id; 10224 10225 /* ffs counts from 1 */ 10226 our_id = ffs(targid_mask); 10227 if (our_id == 0) 10228 our_id = ahd->our_id; 10229 else 10230 our_id--; 10231 scsiid &= TID; 10232 scsiid |= our_id; 10233 } 10234 if ((ahd->features & AHD_ULTRA2) != 0) 10235 ahd_outb(ahd, SCSIID_ULTRA2, scsiid); 10236 else 10237 ahd_outb(ahd, SCSIID, scsiid); 10238 #endif 10239 } 10240 10241 void 10242 ahd_run_tqinfifo(struct ahd_softc *ahd, int paused) 10243 { 10244 struct target_cmd *cmd; 10245 10246 ahd_sync_tqinfifo(ahd, BUS_DMASYNC_POSTREAD); 10247 while ((cmd = &ahd->targetcmds[ahd->tqinfifonext])->cmd_valid != 0) { 10248 10249 /* 10250 * Only advance through the queue if we 10251 * have the resources to process the command. 10252 */ 10253 if (ahd_handle_target_cmd(ahd, cmd) != 0) 10254 break; 10255 10256 cmd->cmd_valid = 0; 10257 ahd_dmamap_sync(ahd, ahd->shared_data_dmat, 10258 ahd->shared_data_dmamap, 10259 ahd_targetcmd_offset(ahd, ahd->tqinfifonext), 10260 sizeof(struct target_cmd), 10261 BUS_DMASYNC_PREREAD); 10262 ahd->tqinfifonext++; 10263 10264 /* 10265 * Lazily update our position in the target mode incoming 10266 * command queue as seen by the sequencer. 10267 */ 10268 if ((ahd->tqinfifonext & (HOST_TQINPOS - 1)) == 1) { 10269 u_int hs_mailbox; 10270 10271 hs_mailbox = ahd_inb(ahd, HS_MAILBOX); 10272 hs_mailbox &= ~HOST_TQINPOS; 10273 hs_mailbox |= ahd->tqinfifonext & HOST_TQINPOS; 10274 ahd_outb(ahd, HS_MAILBOX, hs_mailbox); 10275 } 10276 } 10277 } 10278 10279 static int 10280 ahd_handle_target_cmd(struct ahd_softc *ahd, struct target_cmd *cmd) 10281 { 10282 struct ahd_tmode_tstate *tstate; 10283 struct ahd_tmode_lstate *lstate; 10284 struct ccb_accept_tio *atio; 10285 uint8_t *byte; 10286 int initiator; 10287 int target; 10288 int lun; 10289 10290 initiator = SCSIID_TARGET(ahd, cmd->scsiid); 10291 target = SCSIID_OUR_ID(cmd->scsiid); 10292 lun = (cmd->identify & MSG_IDENTIFY_LUNMASK); 10293 10294 byte = cmd->bytes; 10295 tstate = ahd->enabled_targets[target]; 10296 lstate = NULL; 10297 if (tstate != NULL) 10298 lstate = tstate->enabled_luns[lun]; 10299 10300 /* 10301 * Commands for disabled luns go to the black hole driver. 10302 */ 10303 if (lstate == NULL) 10304 lstate = ahd->black_hole; 10305 10306 atio = (struct ccb_accept_tio*)SLIST_FIRST(&lstate->accept_tios); 10307 if (atio == NULL) { 10308 ahd->flags |= AHD_TQINFIFO_BLOCKED; 10309 /* 10310 * Wait for more ATIOs from the peripheral driver for this lun. 10311 */ 10312 return (1); 10313 } else 10314 ahd->flags &= ~AHD_TQINFIFO_BLOCKED; 10315 #ifdef AHD_DEBUG 10316 if ((ahd_debug & AHD_SHOW_TQIN) != 0) 10317 printf("Incoming command from %d for %d:%d%s\n", 10318 initiator, target, lun, 10319 lstate == ahd->black_hole ? "(Black Holed)" : ""); 10320 #endif 10321 SLIST_REMOVE_HEAD(&lstate->accept_tios, sim_links.sle); 10322 10323 if (lstate == ahd->black_hole) { 10324 /* Fill in the wildcards */ 10325 atio->ccb_h.target_id = target; 10326 atio->ccb_h.target_lun = lun; 10327 } 10328 10329 /* 10330 * Package it up and send it off to 10331 * whomever has this lun enabled. 10332 */ 10333 atio->sense_len = 0; 10334 atio->init_id = initiator; 10335 if (byte[0] != 0xFF) { 10336 /* Tag was included */ 10337 atio->tag_action = *byte++; 10338 atio->tag_id = *byte++; 10339 atio->ccb_h.flags |= CAM_TAG_ACTION_VALID; 10340 } else { 10341 atio->ccb_h.flags &= ~CAM_TAG_ACTION_VALID; 10342 } 10343 byte++; 10344 10345 /* Okay. Now determine the cdb size based on the command code */ 10346 switch (*byte >> CMD_GROUP_CODE_SHIFT) { 10347 case 0: 10348 atio->cdb_len = 6; 10349 break; 10350 case 1: 10351 case 2: 10352 atio->cdb_len = 10; 10353 break; 10354 case 4: 10355 atio->cdb_len = 16; 10356 break; 10357 case 5: 10358 atio->cdb_len = 12; 10359 break; 10360 case 3: 10361 default: 10362 /* Only copy the opcode. */ 10363 atio->cdb_len = 1; 10364 printf("Reserved or VU command code type encountered\n"); 10365 break; 10366 } 10367 10368 memcpy(atio->cdb_io.cdb_bytes, byte, atio->cdb_len); 10369 10370 atio->ccb_h.status |= CAM_CDB_RECVD; 10371 10372 if ((cmd->identify & MSG_IDENTIFY_DISCFLAG) == 0) { 10373 /* 10374 * We weren't allowed to disconnect. 10375 * We're hanging on the bus until a 10376 * continue target I/O comes in response 10377 * to this accept tio. 10378 */ 10379 #ifdef AHD_DEBUG 10380 if ((ahd_debug & AHD_SHOW_TQIN) != 0) 10381 printf("Received Immediate Command %d:%d:%d - %p\n", 10382 initiator, target, lun, ahd->pending_device); 10383 #endif 10384 ahd->pending_device = lstate; 10385 ahd_freeze_ccb((union ccb *)atio); 10386 atio->ccb_h.flags |= CAM_DIS_DISCONNECT; 10387 } 10388 xpt_done((union ccb*)atio); 10389 return (0); 10390 } 10391 10392 #endif 10393