xref: /freebsd/sys/dev/ata/chipsets/ata-jmicron.c (revision 39beb93c)
1 /*-
2  * Copyright (c) 1998 - 2008 S�ren Schmidt <sos@FreeBSD.org>
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer,
10  *    without modification, immediately at the beginning of the file.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25  */
26 
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
29 
30 #include "opt_ata.h"
31 #include <sys/param.h>
32 #include <sys/module.h>
33 #include <sys/systm.h>
34 #include <sys/kernel.h>
35 #include <sys/ata.h>
36 #include <sys/bus.h>
37 #include <sys/endian.h>
38 #include <sys/malloc.h>
39 #include <sys/lock.h>
40 #include <sys/mutex.h>
41 #include <sys/sema.h>
42 #include <sys/taskqueue.h>
43 #include <vm/uma.h>
44 #include <machine/stdarg.h>
45 #include <machine/resource.h>
46 #include <machine/bus.h>
47 #include <sys/rman.h>
48 #include <dev/pci/pcivar.h>
49 #include <dev/pci/pcireg.h>
50 #include <dev/ata/ata-all.h>
51 #include <dev/ata/ata-pci.h>
52 #include <ata_if.h>
53 
54 /* local prototypes */
55 static int ata_jmicron_chipinit(device_t dev);
56 static int ata_jmicron_ch_attach(device_t dev);
57 static int ata_jmicron_ch_detach(device_t dev);
58 static void ata_jmicron_reset(device_t dev);
59 static void ata_jmicron_setmode(device_t dev, int mode);
60 
61 /*
62  * JMicron chipset support functions
63  */
64 static int
65 ata_jmicron_probe(device_t dev)
66 {
67     struct ata_pci_controller *ctlr = device_get_softc(dev);
68     struct ata_chip_id *idx;
69     static struct ata_chip_id ids[] =
70     {{ ATA_JMB360, 0, 1, 0, ATA_SA300, "JMB360" },
71      { ATA_JMB361, 0, 1, 1, ATA_SA300, "JMB361" },
72      { ATA_JMB363, 0, 2, 1, ATA_SA300, "JMB363" },
73      { ATA_JMB365, 0, 1, 2, ATA_SA300, "JMB365" },
74      { ATA_JMB366, 0, 2, 2, ATA_SA300, "JMB366" },
75      { ATA_JMB368, 0, 0, 1, ATA_UDMA6, "JMB368" },
76      { 0, 0, 0, 0, 0, 0}};
77     char buffer[64];
78 
79     if (pci_get_vendor(dev) != ATA_JMICRON_ID)
80 	return ENXIO;
81 
82     if (!(idx = ata_match_chip(dev, ids)))
83         return ENXIO;
84 
85     if ((pci_read_config(dev, 0xdf, 1) & 0x40) &&
86 	(pci_get_function(dev) == (pci_read_config(dev, 0x40, 1) & 0x02 >> 1)))
87 	sprintf(buffer, "JMicron %s %s controller",
88 		idx->text, ata_mode2str(ATA_UDMA6));
89     else
90 	sprintf(buffer, "JMicron %s %s controller",
91 		idx->text, ata_mode2str(idx->max_dma));
92     device_set_desc_copy(dev, buffer);
93     ctlr->chip = idx;
94     ctlr->chipinit = ata_jmicron_chipinit;
95     return 0;
96 }
97 
98 static int
99 ata_jmicron_chipinit(device_t dev)
100 {
101     struct ata_pci_controller *ctlr = device_get_softc(dev);
102     int error;
103 
104     if (ata_setup_interrupt(dev, ata_generic_intr))
105 	return ENXIO;
106 
107     /* do we have multiple PCI functions ? */
108     if (pci_read_config(dev, 0xdf, 1) & 0x40) {
109 	/* are we on the AHCI part ? */
110 	if (ata_ahci_chipinit(dev) != ENXIO)
111 	    return 0;
112 
113 	/* otherwise we are on the PATA part */
114 	ctlr->ch_attach = ata_pci_ch_attach;
115 	ctlr->ch_detach = ata_pci_ch_detach;
116 	ctlr->reset = ata_generic_reset;
117 	ctlr->setmode = ata_jmicron_setmode;
118 	ctlr->channels = ctlr->chip->cfg2;
119     }
120     else {
121 	/* set controller configuration to a combined setup we support */
122 	pci_write_config(dev, 0x40, 0x80c0a131, 4);
123 	pci_write_config(dev, 0x80, 0x01200000, 4);
124 
125 	if (ctlr->chip->cfg1 && (error = ata_ahci_chipinit(dev)))
126 	    return error;
127 
128 	ctlr->ch_attach = ata_jmicron_ch_attach;
129 	ctlr->ch_detach = ata_jmicron_ch_detach;
130 	ctlr->reset = ata_jmicron_reset;
131 	ctlr->setmode = ata_jmicron_setmode;
132 
133 	/* set the number of HW channels */
134 	ctlr->channels = ctlr->chip->cfg1 + ctlr->chip->cfg2;
135 	ctlr->ichannels |= ((0xffffffffU >> (32 - ctlr->chip->cfg2))
136 	    << ctlr->chip->cfg1);
137     }
138     return 0;
139 }
140 
141 static int
142 ata_jmicron_ch_attach(device_t dev)
143 {
144     struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
145     struct ata_channel *ch = device_get_softc(dev);
146     int error;
147 
148     if (ch->unit >= ctlr->chip->cfg1) {
149 	ch->unit -= ctlr->chip->cfg1;
150 	error = ata_pci_ch_attach(dev);
151 	ch->unit += ctlr->chip->cfg1;
152     }
153     else
154 	error = ata_ahci_ch_attach(dev);
155     return error;
156 }
157 
158 static int
159 ata_jmicron_ch_detach(device_t dev)
160 {
161     struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
162     struct ata_channel *ch = device_get_softc(dev);
163     int error;
164 
165     if (ch->unit >= ctlr->chip->cfg1) {
166 	ch->unit -= ctlr->chip->cfg1;
167 	error = ata_pci_ch_detach(dev);
168 	ch->unit += ctlr->chip->cfg1;
169     }
170     else
171 	error = ata_ahci_ch_detach(dev);
172 
173     return (error);
174 }
175 
176 static void
177 ata_jmicron_reset(device_t dev)
178 {
179     struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
180     struct ata_channel *ch = device_get_softc(dev);
181 
182     if (ch->unit >= ctlr->chip->cfg1)
183 	ata_generic_reset(dev);
184     else
185 	ata_ahci_reset(dev);
186 }
187 
188 static void
189 ata_jmicron_setmode(device_t dev, int mode)
190 {
191     struct ata_pci_controller *ctlr = device_get_softc(GRANDPARENT(dev));
192     struct ata_channel *ch = device_get_softc(device_get_parent(dev));
193 
194     if (pci_read_config(dev, 0xdf, 1) & 0x40 || ch->unit >= ctlr->chip->cfg1) {
195 	struct ata_device *atadev = device_get_softc(dev);
196 
197 	/* check for 80pin cable present */
198 	if (pci_read_config(dev, 0x40, 1) & 0x08)
199 	    mode = ata_limit_mode(dev, mode, ATA_UDMA2);
200 	else
201 	    mode = ata_limit_mode(dev, mode, ATA_UDMA6);
202 
203 	if (!ata_controlcmd(dev, ATA_SETFEATURES, ATA_SF_SETXFER, 0, mode))
204 	    atadev->mode = mode;
205     }
206     else
207 	ata_sata_setmode(dev, mode);
208 }
209 
210 ATA_DECLARE_DRIVER(ata_jmicron);
211 MODULE_DEPEND(ata_jmicron, ata_ahci, 1, 1, 1);
212