xref: /freebsd/sys/dev/ath/ath_hal/ah_internal.h (revision 0957b409)
1 /*-
2  * SPDX-License-Identifier: ISC
3  *
4  * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
5  * Copyright (c) 2002-2008 Atheros Communications, Inc.
6  *
7  * Permission to use, copy, modify, and/or distribute this software for any
8  * purpose with or without fee is hereby granted, provided that the above
9  * copyright notice and this permission notice appear in all copies.
10  *
11  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18  *
19  * $FreeBSD$
20  */
21 #ifndef _ATH_AH_INTERAL_H_
22 #define _ATH_AH_INTERAL_H_
23 /*
24  * Atheros Device Hardware Access Layer (HAL).
25  *
26  * Internal definitions.
27  */
28 #define	AH_NULL	0
29 #define	AH_MIN(a,b)	((a)<(b)?(a):(b))
30 #define	AH_MAX(a,b)	((a)>(b)?(a):(b))
31 
32 #include <net80211/_ieee80211.h>
33 #include <sys/queue.h>			/* XXX for reasons */
34 
35 #ifndef NBBY
36 #define	NBBY	8			/* number of bits/byte */
37 #endif
38 
39 #ifndef roundup
40 #define	roundup(x, y)	((((x)+((y)-1))/(y))*(y))  /* to any y */
41 #endif
42 #ifndef howmany
43 #define	howmany(x, y)	(((x)+((y)-1))/(y))
44 #endif
45 
46 #ifndef offsetof
47 #define	offsetof(type, field)	((size_t)(&((type *)0)->field))
48 #endif
49 
50 typedef struct {
51 	uint32_t	start;		/* first register */
52 	uint32_t	end;		/* ending register or zero */
53 } HAL_REGRANGE;
54 
55 typedef struct {
56 	uint32_t	addr;		/* regiser address/offset */
57 	uint32_t	value;		/* value to write */
58 } HAL_REGWRITE;
59 
60 /*
61  * Transmit power scale factor.
62  *
63  * NB: This is not public because we want to discourage the use of
64  *     scaling; folks should use the tx power limit interface.
65  */
66 typedef enum {
67 	HAL_TP_SCALE_MAX	= 0,		/* no scaling (default) */
68 	HAL_TP_SCALE_50		= 1,		/* 50% of max (-3 dBm) */
69 	HAL_TP_SCALE_25		= 2,		/* 25% of max (-6 dBm) */
70 	HAL_TP_SCALE_12		= 3,		/* 12% of max (-9 dBm) */
71 	HAL_TP_SCALE_MIN	= 4,		/* min, but still on */
72 } HAL_TP_SCALE;
73 
74 typedef enum {
75  	HAL_CAP_RADAR		= 0,		/* Radar capability */
76  	HAL_CAP_AR		= 1,		/* AR capability */
77 } HAL_PHYDIAG_CAPS;
78 
79 /*
80  * Enable/disable strong signal fast diversity
81  */
82 #define	HAL_CAP_STRONG_DIV		2
83 
84 /*
85  * Each chip or class of chips registers to offer support.
86  *
87  * Compiled-in versions will include a linker set to iterate through the
88  * linked in code.
89  *
90  * Modules will have to register HAL backends separately.
91  */
92 struct ath_hal_chip {
93 	const char	*name;
94 	const char	*(*probe)(uint16_t vendorid, uint16_t devid);
95 	struct ath_hal	*(*attach)(uint16_t devid, HAL_SOFTC,
96 			    HAL_BUS_TAG, HAL_BUS_HANDLE, uint16_t *eepromdata,
97 			    HAL_OPS_CONFIG *ah,
98 			    HAL_STATUS *error);
99 	TAILQ_ENTRY(ath_hal_chip) node;
100 };
101 #ifndef AH_CHIP
102 #define	AH_CHIP(_name, _probe, _attach)				\
103 struct ath_hal_chip _name##_chip = {				\
104 	.name		= #_name,				\
105 	.probe		= _probe,				\
106 	.attach		= _attach,				\
107 };								\
108 OS_DATA_SET(ah_chips, _name##_chip)
109 #endif
110 
111 /*
112  * Each RF backend registers to offer support; this is mostly
113  * used by multi-chip 5212 solutions.  Single-chip solutions
114  * have a fixed idea about which RF to use.
115  *
116  * Compiled in versions will include this linker set to iterate through
117  * the linked in code.
118  *
119  * Modules will have to register RF backends separately.
120  */
121 struct ath_hal_rf {
122 	const char	*name;
123 	HAL_BOOL	(*probe)(struct ath_hal *ah);
124 	HAL_BOOL	(*attach)(struct ath_hal *ah, HAL_STATUS *ecode);
125 	TAILQ_ENTRY(ath_hal_rf) node;
126 };
127 #ifndef AH_RF
128 #define	AH_RF(_name, _probe, _attach)				\
129 struct ath_hal_rf _name##_rf = {				\
130 	.name		= __STRING(_name),			\
131 	.probe		= _probe,				\
132 	.attach		= _attach,				\
133 };								\
134 OS_DATA_SET(ah_rfs, _name##_rf)
135 #endif
136 
137 struct ath_hal_rf *ath_hal_rfprobe(struct ath_hal *ah, HAL_STATUS *ecode);
138 
139 /*
140  * Maximum number of internal channels.  Entries are per unique
141  * frequency so this might be need to be increased to handle all
142  * usage cases; typically no more than 32 are really needed but
143  * dynamically allocating the data structures is a bit painful
144  * right now.
145  */
146 #ifndef AH_MAXCHAN
147 #define	AH_MAXCHAN	128
148 #endif
149 
150 #define	HAL_NF_CAL_HIST_LEN_FULL	5
151 #define	HAL_NF_CAL_HIST_LEN_SMALL	1
152 #define	HAL_NUM_NF_READINGS		6	/* 3 chains * (ctl + ext) */
153 #define	HAL_NF_LOAD_DELAY		1000
154 
155 /*
156  * PER_CHAN doesn't work for now, as it looks like the device layer
157  * has to pre-populate the per-channel list with nominal values.
158  */
159 //#define	ATH_NF_PER_CHAN		1
160 
161 typedef struct {
162     u_int8_t    curr_index;
163     int8_t      invalidNFcount; /* TO DO: REMOVE THIS! */
164     int16_t     priv_nf[HAL_NUM_NF_READINGS];
165 } HAL_NFCAL_BASE;
166 
167 typedef struct {
168     HAL_NFCAL_BASE base;
169     int16_t     nf_cal_buffer[HAL_NF_CAL_HIST_LEN_FULL][HAL_NUM_NF_READINGS];
170 } HAL_NFCAL_HIST_FULL;
171 
172 typedef struct {
173     HAL_NFCAL_BASE base;
174     int16_t     nf_cal_buffer[HAL_NF_CAL_HIST_LEN_SMALL][HAL_NUM_NF_READINGS];
175 } HAL_NFCAL_HIST_SMALL;
176 
177 #ifdef	ATH_NF_PER_CHAN
178 typedef HAL_NFCAL_HIST_FULL HAL_CHAN_NFCAL_HIST;
179 #define	AH_HOME_CHAN_NFCAL_HIST(ah, ichan) (ichan ? &ichan->nf_cal_hist: NULL)
180 #else
181 typedef HAL_NFCAL_HIST_SMALL HAL_CHAN_NFCAL_HIST;
182 #define	AH_HOME_CHAN_NFCAL_HIST(ah, ichan) (&AH_PRIVATE(ah)->nf_cal_hist)
183 #endif	/* ATH_NF_PER_CHAN */
184 
185 /*
186  * Internal per-channel state.  These are found
187  * using ic_devdata in the ieee80211_channel.
188  */
189 typedef struct {
190 	uint16_t	channel;	/* h/w frequency, NB: may be mapped */
191 	uint8_t		privFlags;
192 #define	CHANNEL_IQVALID		0x01	/* IQ calibration valid */
193 #define	CHANNEL_ANI_INIT	0x02	/* ANI state initialized */
194 #define	CHANNEL_ANI_SETUP	0x04	/* ANI state setup */
195 #define	CHANNEL_MIMO_NF_VALID	0x04	/* Mimo NF values are valid */
196 	uint8_t		calValid;	/* bitmask of cal types */
197 	int8_t		iCoff;
198 	int8_t		qCoff;
199 	int16_t		rawNoiseFloor;
200 	int16_t		noiseFloorAdjust;
201 	int16_t		noiseFloorCtl[AH_MAX_CHAINS];
202 	int16_t		noiseFloorExt[AH_MAX_CHAINS];
203 	uint16_t	mainSpur;	/* cached spur value for this channel */
204 
205 	/*XXX TODO: make these part of privFlags */
206 	uint8_t  paprd_done:1,           /* 1: PAPRD DONE, 0: PAPRD Cal not done */
207 	       paprd_table_write_done:1; /* 1: DONE, 0: Cal data write not done */
208 	int		one_time_cals_done;
209 	HAL_CHAN_NFCAL_HIST nf_cal_hist;
210 } HAL_CHANNEL_INTERNAL;
211 
212 /* channel requires noise floor check */
213 #define	CHANNEL_NFCREQUIRED	IEEE80211_CHAN_PRIV0
214 
215 /* all full-width channels */
216 #define	IEEE80211_CHAN_ALLFULL \
217 	(IEEE80211_CHAN_ALL - (IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER))
218 #define	IEEE80211_CHAN_ALLTURBOFULL \
219 	(IEEE80211_CHAN_ALLTURBO - \
220 	 (IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER))
221 
222 typedef struct {
223 	uint32_t	halChanSpreadSupport 		: 1,
224 			halSleepAfterBeaconBroken	: 1,
225 			halCompressSupport		: 1,
226 			halBurstSupport			: 1,
227 			halFastFramesSupport		: 1,
228 			halChapTuningSupport		: 1,
229 			halTurboGSupport		: 1,
230 			halTurboPrimeSupport		: 1,
231 			halMicAesCcmSupport		: 1,
232 			halMicCkipSupport		: 1,
233 			halMicTkipSupport		: 1,
234 			halTkipMicTxRxKeySupport	: 1,
235 			halCipherAesCcmSupport		: 1,
236 			halCipherCkipSupport		: 1,
237 			halCipherTkipSupport		: 1,
238 			halPSPollBroken			: 1,
239 			halVEOLSupport			: 1,
240 			halBssIdMaskSupport		: 1,
241 			halMcastKeySrchSupport		: 1,
242 			halTsfAddSupport		: 1,
243 			halChanHalfRate			: 1,
244 			halChanQuarterRate		: 1,
245 			halHTSupport			: 1,
246 			halHTSGI20Support		: 1,
247 			halRfSilentSupport		: 1,
248 			halHwPhyCounterSupport		: 1,
249 			halWowSupport			: 1,
250 			halWowMatchPatternExact		: 1,
251 			halAutoSleepSupport		: 1,
252 			halFastCCSupport		: 1,
253 			halBtCoexSupport		: 1;
254 	uint32_t	halRxStbcSupport		: 1,
255 			halTxStbcSupport		: 1,
256 			halGTTSupport			: 1,
257 			halCSTSupport			: 1,
258 			halRifsRxSupport		: 1,
259 			halRifsTxSupport		: 1,
260 			hal4AddrAggrSupport		: 1,
261 			halExtChanDfsSupport		: 1,
262 			halUseCombinedRadarRssi		: 1,
263 			halForcePpmSupport		: 1,
264 			halEnhancedPmSupport		: 1,
265 			halEnhancedDfsSupport		: 1,
266 			halMbssidAggrSupport		: 1,
267 			halBssidMatchSupport		: 1,
268 			hal4kbSplitTransSupport		: 1,
269 			halHasRxSelfLinkedTail		: 1,
270 			halSupportsFastClock5GHz	: 1,
271 			halHasBBReadWar			: 1,
272 			halSerialiseRegWar		: 1,
273 			halMciSupport			: 1,
274 			halRxTxAbortSupport		: 1,
275 			halPaprdEnabled			: 1,
276 			halHasUapsdSupport		: 1,
277 			halWpsPushButtonSupport		: 1,
278 			halBtCoexApsmWar		: 1,
279 			halGenTimerSupport		: 1,
280 			halLDPCSupport			: 1,
281 			halHwBeaconProcSupport		: 1,
282 			halEnhancedDmaSupport		: 1;
283 	uint32_t	halIsrRacSupport		: 1,
284 			halApmEnable			: 1,
285 			halIntrMitigation		: 1,
286 			hal49GhzSupport			: 1,
287 			halAntDivCombSupport		: 1,
288 			halAntDivCombSupportOrg		: 1,
289 			halRadioRetentionSupport	: 1,
290 			halSpectralScanSupport		: 1,
291 			halRxUsingLnaMixing		: 1,
292 			halRxDoMyBeacon			: 1,
293 			halHwUapsdTrig			: 1;
294 
295 	uint32_t	halWirelessModes;
296 	uint16_t	halTotalQueues;
297 	uint16_t	halKeyCacheSize;
298 	uint16_t	halLow5GhzChan, halHigh5GhzChan;
299 	uint16_t	halLow2GhzChan, halHigh2GhzChan;
300 	int		halTxTstampPrecision;
301 	int		halRxTstampPrecision;
302 	int		halRtsAggrLimit;
303 	uint8_t		halTxChainMask;
304 	uint8_t		halRxChainMask;
305 	uint8_t		halNumGpioPins;
306 	uint8_t		halNumAntCfg2GHz;
307 	uint8_t		halNumAntCfg5GHz;
308 	uint32_t	halIntrMask;
309 	uint8_t		halTxStreams;
310 	uint8_t		halRxStreams;
311 	HAL_MFP_OPT_T	halMfpSupport;
312 
313 	/* AR9300 HAL porting capabilities */
314 	int		hal_paprd_enabled;
315 	int		hal_pcie_lcr_offset;
316 	int		hal_pcie_lcr_extsync_en;
317 	int		halNumTxMaps;
318 	int		halTxDescLen;
319 	int		halTxStatusLen;
320 	int		halRxStatusLen;
321 	int		halRxHpFifoDepth;
322 	int		halRxLpFifoDepth;
323 	uint32_t	halRegCap;		/* XXX needed? */
324 	int		halNumMRRetries;
325 	int		hal_ani_poll_interval;
326 	int		hal_channel_switch_time_usec;
327 } HAL_CAPABILITIES;
328 
329 struct regDomain;
330 
331 /*
332  * Definitions for ah_flags in ath_hal_private
333  */
334 #define		AH_USE_EEPROM	0x1
335 #define		AH_IS_HB63	0x2
336 
337 /*
338  * The ``private area'' follows immediately after the ``public area''
339  * in the data structure returned by ath_hal_attach.  Private data are
340  * used by device-independent code such as the regulatory domain support.
341  * In general, code within the HAL should never depend on data in the
342  * public area.  Instead any public data needed internally should be
343  * shadowed here.
344  *
345  * When declaring a device-specific ath_hal data structure this structure
346  * is assumed to at the front; e.g.
347  *
348  *	struct ath_hal_5212 {
349  *		struct ath_hal_private	ah_priv;
350  *		...
351  *	};
352  *
353  * It might be better to manage the method pointers in this structure
354  * using an indirect pointer to a read-only data structure but this would
355  * disallow class-style method overriding.
356  */
357 struct ath_hal_private {
358 	struct ath_hal	h;			/* public area */
359 
360 	/* NB: all methods go first to simplify initialization */
361 	HAL_BOOL	(*ah_getChannelEdges)(struct ath_hal*,
362 				uint16_t channelFlags,
363 				uint16_t *lowChannel, uint16_t *highChannel);
364 	u_int		(*ah_getWirelessModes)(struct ath_hal*);
365 	HAL_BOOL	(*ah_eepromRead)(struct ath_hal *, u_int off,
366 				uint16_t *data);
367 	HAL_BOOL	(*ah_eepromWrite)(struct ath_hal *, u_int off,
368 				uint16_t data);
369 	HAL_BOOL	(*ah_getChipPowerLimits)(struct ath_hal *,
370 				struct ieee80211_channel *);
371 	int16_t		(*ah_getNfAdjust)(struct ath_hal *,
372 				const HAL_CHANNEL_INTERNAL*);
373 	void		(*ah_getNoiseFloor)(struct ath_hal *,
374 				int16_t nfarray[]);
375 
376 	void		*ah_eeprom;		/* opaque EEPROM state */
377 	uint16_t	ah_eeversion;		/* EEPROM version */
378 	void		(*ah_eepromDetach)(struct ath_hal *);
379 	HAL_STATUS	(*ah_eepromGet)(struct ath_hal *, int, void *);
380 	HAL_STATUS	(*ah_eepromSet)(struct ath_hal *, int, int);
381 	uint16_t	(*ah_getSpurChan)(struct ath_hal *, int, HAL_BOOL);
382 	HAL_BOOL	(*ah_eepromDiag)(struct ath_hal *, int request,
383 			    const void *args, uint32_t argsize,
384 			    void **result, uint32_t *resultsize);
385 
386 	/*
387 	 * Device revision information.
388 	 */
389 	uint16_t	ah_devid;		/* PCI device ID */
390 	uint16_t	ah_subvendorid;		/* PCI subvendor ID */
391 	uint32_t	ah_macVersion;		/* MAC version id */
392 	uint16_t	ah_macRev;		/* MAC revision */
393 	uint16_t	ah_phyRev;		/* PHY revision */
394 	uint16_t	ah_analog5GhzRev;	/* 2GHz radio revision */
395 	uint16_t	ah_analog2GhzRev;	/* 5GHz radio revision */
396 	uint32_t	ah_flags;		/* misc flags */
397 	uint8_t		ah_ispcie;		/* PCIE, special treatment */
398 	uint8_t		ah_devType;		/* card type - CB, PCI, PCIe */
399 
400 	HAL_OPMODE	ah_opmode;		/* operating mode from reset */
401 	const struct ieee80211_channel *ah_curchan;/* operating channel */
402 	HAL_CAPABILITIES ah_caps;		/* device capabilities */
403 	uint32_t	ah_diagreg;		/* user-specified AR_DIAG_SW */
404 	int16_t		ah_powerLimit;		/* tx power cap */
405 	uint16_t	ah_maxPowerLevel;	/* calculated max tx power */
406 	u_int		ah_tpScale;		/* tx power scale factor */
407 	u_int16_t	ah_extraTxPow;		/* low rates extra-txpower */
408 	uint32_t	ah_11nCompat;		/* 11n compat controls */
409 
410 	/*
411 	 * State for regulatory domain handling.
412 	 */
413 	HAL_REG_DOMAIN	ah_currentRD;		/* EEPROM regulatory domain */
414 	HAL_REG_DOMAIN	ah_currentRDext;	/* EEPROM extended regdomain flags */
415 	HAL_DFS_DOMAIN	ah_dfsDomain;		/* current DFS domain */
416 	HAL_CHANNEL_INTERNAL ah_channels[AH_MAXCHAN]; /* private chan state */
417 	u_int		ah_nchan;		/* valid items in ah_channels */
418 	const struct regDomain *ah_rd2GHz;	/* reg state for 2G band */
419 	const struct regDomain *ah_rd5GHz;	/* reg state for 5G band */
420 
421 	uint8_t    	ah_coverageClass;   	/* coverage class */
422 	/*
423 	 * RF Silent handling; setup according to the EEPROM.
424 	 */
425 	uint16_t	ah_rfsilent;		/* GPIO pin + polarity */
426 	HAL_BOOL	ah_rfkillEnabled;	/* enable/disable RfKill */
427 	/*
428 	 * Diagnostic support for discriminating HIUERR reports.
429 	 */
430 	uint32_t	ah_fatalState[6];	/* AR_ISR+shadow regs */
431 	int		ah_rxornIsFatal;	/* how to treat HAL_INT_RXORN */
432 
433 	/* Only used if ATH_NF_PER_CHAN is defined */
434 	HAL_NFCAL_HIST_FULL	nf_cal_hist;
435 
436 	/*
437 	 * Channel survey history - current channel only.
438 	 */
439 	 HAL_CHANNEL_SURVEY	ah_chansurvey;	/* channel survey */
440 };
441 
442 #define	AH_PRIVATE(_ah)	((struct ath_hal_private *)(_ah))
443 
444 #define	ath_hal_getChannelEdges(_ah, _cf, _lc, _hc) \
445 	AH_PRIVATE(_ah)->ah_getChannelEdges(_ah, _cf, _lc, _hc)
446 #define	ath_hal_getWirelessModes(_ah) \
447 	AH_PRIVATE(_ah)->ah_getWirelessModes(_ah)
448 #define	ath_hal_eepromRead(_ah, _off, _data) \
449 	AH_PRIVATE(_ah)->ah_eepromRead(_ah, _off, _data)
450 #define	ath_hal_eepromWrite(_ah, _off, _data) \
451 	AH_PRIVATE(_ah)->ah_eepromWrite(_ah, _off, _data)
452 #define	ath_hal_gpioCfgOutput(_ah, _gpio, _type) \
453 	(_ah)->ah_gpioCfgOutput(_ah, _gpio, _type)
454 #define	ath_hal_gpioCfgInput(_ah, _gpio) \
455 	(_ah)->ah_gpioCfgInput(_ah, _gpio)
456 #define	ath_hal_gpioGet(_ah, _gpio) \
457 	(_ah)->ah_gpioGet(_ah, _gpio)
458 #define	ath_hal_gpioSet(_ah, _gpio, _val) \
459 	(_ah)->ah_gpioSet(_ah, _gpio, _val)
460 #define	ath_hal_gpioSetIntr(_ah, _gpio, _ilevel) \
461 	(_ah)->ah_gpioSetIntr(_ah, _gpio, _ilevel)
462 #define	ath_hal_getpowerlimits(_ah, _chan) \
463 	AH_PRIVATE(_ah)->ah_getChipPowerLimits(_ah, _chan)
464 #define ath_hal_getNfAdjust(_ah, _c) \
465 	AH_PRIVATE(_ah)->ah_getNfAdjust(_ah, _c)
466 #define	ath_hal_getNoiseFloor(_ah, _nfArray) \
467 	AH_PRIVATE(_ah)->ah_getNoiseFloor(_ah, _nfArray)
468 #define	ath_hal_configPCIE(_ah, _reset, _poweroff) \
469 	(_ah)->ah_configPCIE(_ah, _reset, _poweroff)
470 #define	ath_hal_disablePCIE(_ah) \
471 	(_ah)->ah_disablePCIE(_ah)
472 #define	ath_hal_setInterrupts(_ah, _mask) \
473 	(_ah)->ah_setInterrupts(_ah, _mask)
474 
475 #define ath_hal_isrfkillenabled(_ah)  \
476     (ath_hal_getcapability(_ah, HAL_CAP_RFSILENT, 1, AH_NULL) == HAL_OK)
477 #define ath_hal_enable_rfkill(_ah, _v) \
478     ath_hal_setcapability(_ah, HAL_CAP_RFSILENT, 1, _v, AH_NULL)
479 #define ath_hal_hasrfkill_int(_ah)  \
480     (ath_hal_getcapability(_ah, HAL_CAP_RFSILENT, 3, AH_NULL) == HAL_OK)
481 
482 #define	ath_hal_eepromDetach(_ah) do {				\
483 	if (AH_PRIVATE(_ah)->ah_eepromDetach != AH_NULL)	\
484 		AH_PRIVATE(_ah)->ah_eepromDetach(_ah);		\
485 } while (0)
486 #define	ath_hal_eepromGet(_ah, _param, _val) \
487 	AH_PRIVATE(_ah)->ah_eepromGet(_ah, _param, _val)
488 #define	ath_hal_eepromSet(_ah, _param, _val) \
489 	AH_PRIVATE(_ah)->ah_eepromSet(_ah, _param, _val)
490 #define	ath_hal_eepromGetFlag(_ah, _param) \
491 	(AH_PRIVATE(_ah)->ah_eepromGet(_ah, _param, AH_NULL) == HAL_OK)
492 #define ath_hal_getSpurChan(_ah, _ix, _is2G) \
493 	AH_PRIVATE(_ah)->ah_getSpurChan(_ah, _ix, _is2G)
494 #define	ath_hal_eepromDiag(_ah, _request, _a, _asize, _r, _rsize) \
495 	AH_PRIVATE(_ah)->ah_eepromDiag(_ah, _request, _a, _asize,  _r, _rsize)
496 
497 #ifndef _NET_IF_IEEE80211_H_
498 /*
499  * Stuff that would naturally come from _ieee80211.h
500  */
501 #define	IEEE80211_ADDR_LEN		6
502 
503 #define	IEEE80211_WEP_IVLEN			3	/* 24bit */
504 #define	IEEE80211_WEP_KIDLEN			1	/* 1 octet */
505 #define	IEEE80211_WEP_CRCLEN			4	/* CRC-32 */
506 
507 #define	IEEE80211_CRC_LEN			4
508 
509 #define	IEEE80211_MAX_LEN			(2300 + IEEE80211_CRC_LEN + \
510     (IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN + IEEE80211_WEP_CRCLEN))
511 #endif /* _NET_IF_IEEE80211_H_ */
512 
513 #define HAL_TXQ_USE_LOCKOUT_BKOFF_DIS	0x00000001
514 
515 #define INIT_AIFS		2
516 #define INIT_CWMIN		15
517 #define INIT_CWMIN_11B		31
518 #define INIT_CWMAX		1023
519 #define INIT_SH_RETRY		10
520 #define INIT_LG_RETRY		10
521 #define INIT_SSH_RETRY		32
522 #define INIT_SLG_RETRY		32
523 
524 typedef struct {
525 	uint32_t	tqi_ver;		/* HAL TXQ verson */
526 	HAL_TX_QUEUE	tqi_type;		/* hw queue type*/
527 	HAL_TX_QUEUE_SUBTYPE tqi_subtype;	/* queue subtype, if applicable */
528 	HAL_TX_QUEUE_FLAGS tqi_qflags;		/* queue flags */
529 	uint32_t	tqi_priority;
530 	uint32_t	tqi_aifs;		/* aifs */
531 	uint32_t	tqi_cwmin;		/* cwMin */
532 	uint32_t	tqi_cwmax;		/* cwMax */
533 	uint16_t	tqi_shretry;		/* frame short retry limit */
534 	uint16_t	tqi_lgretry;		/* frame long retry limit */
535 	uint32_t	tqi_cbrPeriod;
536 	uint32_t	tqi_cbrOverflowLimit;
537 	uint32_t	tqi_burstTime;
538 	uint32_t	tqi_readyTime;
539 	uint32_t	tqi_physCompBuf;
540 	uint32_t	tqi_intFlags;		/* flags for internal use */
541 } HAL_TX_QUEUE_INFO;
542 
543 extern	HAL_BOOL ath_hal_setTxQProps(struct ath_hal *ah,
544 		HAL_TX_QUEUE_INFO *qi, const HAL_TXQ_INFO *qInfo);
545 extern	HAL_BOOL ath_hal_getTxQProps(struct ath_hal *ah,
546 		HAL_TXQ_INFO *qInfo, const HAL_TX_QUEUE_INFO *qi);
547 
548 #define	HAL_SPUR_VAL_MASK		0x3FFF
549 #define	HAL_SPUR_CHAN_WIDTH		87
550 #define	HAL_BIN_WIDTH_BASE_100HZ	3125
551 #define	HAL_BIN_WIDTH_TURBO_100HZ	6250
552 #define	HAL_MAX_BINS_ALLOWED		28
553 
554 #define	IS_CHAN_5GHZ(_c)	((_c)->channel > 4900)
555 #define	IS_CHAN_2GHZ(_c)	(!IS_CHAN_5GHZ(_c))
556 
557 #define	IS_CHAN_IN_PUBLIC_SAFETY_BAND(_c) ((_c) > 4940 && (_c) < 4990)
558 
559 /*
560  * Deduce if the host cpu has big- or litt-endian byte order.
561  */
562 static __inline__ int
563 isBigEndian(void)
564 {
565 	union {
566 		int32_t i;
567 		char c[4];
568 	} u;
569 	u.i = 1;
570 	return (u.c[0] == 0);
571 }
572 
573 /* unalligned little endian access */
574 #define LE_READ_2(p)							\
575 	((uint16_t)							\
576 	 ((((const uint8_t *)(p))[0]    ) | (((const uint8_t *)(p))[1]<< 8)))
577 #define LE_READ_4(p)							\
578 	((uint32_t)							\
579 	 ((((const uint8_t *)(p))[0]    ) | (((const uint8_t *)(p))[1]<< 8) |\
580 	  (((const uint8_t *)(p))[2]<<16) | (((const uint8_t *)(p))[3]<<24)))
581 
582 /*
583  * Register manipulation macros that expect bit field defines
584  * to follow the convention that an _S suffix is appended for
585  * a shift count, while the field mask has no suffix.
586  */
587 #define	SM(_v, _f)	(((_v) << _f##_S) & (_f))
588 #define	MS(_v, _f)	(((_v) & (_f)) >> _f##_S)
589 #define OS_REG_RMW(_a, _r, _set, _clr)    \
590 	OS_REG_WRITE(_a, _r, (OS_REG_READ(_a, _r) & ~(_clr)) | (_set))
591 #define	OS_REG_RMW_FIELD(_a, _r, _f, _v) \
592 	OS_REG_WRITE(_a, _r, \
593 		(OS_REG_READ(_a, _r) &~ (_f)) | (((_v) << _f##_S) & (_f)))
594 #define	OS_REG_SET_BIT(_a, _r, _f) \
595 	OS_REG_WRITE(_a, _r, OS_REG_READ(_a, _r) | (_f))
596 #define	OS_REG_CLR_BIT(_a, _r, _f) \
597 	OS_REG_WRITE(_a, _r, OS_REG_READ(_a, _r) &~ (_f))
598 #define OS_REG_IS_BIT_SET(_a, _r, _f) \
599 	    ((OS_REG_READ(_a, _r) & (_f)) != 0)
600 #define	OS_REG_RMW_FIELD_ALT(_a, _r, _f, _v) \
601 	    OS_REG_WRITE(_a, _r, \
602 	    (OS_REG_READ(_a, _r) &~(_f<<_f##_S)) | \
603 	    (((_v) << _f##_S) & (_f<<_f##_S)))
604 #define	OS_REG_READ_FIELD(_a, _r, _f) \
605 	    (((OS_REG_READ(_a, _r) & _f) >> _f##_S))
606 #define	OS_REG_READ_FIELD_ALT(_a, _r, _f) \
607 	    ((OS_REG_READ(_a, _r) >> (_f##_S))&(_f))
608 
609 /* Analog register writes may require a delay between each one (eg Merlin?) */
610 #define	OS_A_REG_RMW_FIELD(_a, _r, _f, _v) \
611 	do { OS_REG_WRITE(_a, _r, (OS_REG_READ(_a, _r) &~ (_f)) | \
612 	    (((_v) << _f##_S) & (_f))) ; OS_DELAY(100); } while (0)
613 #define	OS_A_REG_WRITE(_a, _r, _v) \
614 	do { OS_REG_WRITE(_a, _r, _v); OS_DELAY(100); } while (0)
615 
616 /* wait for the register contents to have the specified value */
617 extern	HAL_BOOL ath_hal_wait(struct ath_hal *, u_int reg,
618 		uint32_t mask, uint32_t val);
619 extern	HAL_BOOL ath_hal_waitfor(struct ath_hal *, u_int reg,
620 		uint32_t mask, uint32_t val, uint32_t timeout);
621 
622 /* return the first n bits in val reversed */
623 extern	uint32_t ath_hal_reverseBits(uint32_t val, uint32_t n);
624 
625 /* printf interfaces */
626 extern	void ath_hal_printf(struct ath_hal *, const char*, ...)
627 		__printflike(2,3);
628 extern	void ath_hal_vprintf(struct ath_hal *, const char*, __va_list)
629 		__printflike(2, 0);
630 extern	const char* ath_hal_ether_sprintf(const uint8_t *mac);
631 
632 /* allocate and free memory */
633 extern	void *ath_hal_malloc(size_t);
634 extern	void ath_hal_free(void *);
635 
636 /* common debugging interfaces */
637 #ifdef AH_DEBUG
638 #include "ah_debug.h"
639 extern	int ath_hal_debug;	/* Global debug flags */
640 
641 /*
642  * The typecast is purely because some callers will pass in
643  * AH_NULL directly rather than using a NULL ath_hal pointer.
644  */
645 #define	HALDEBUG(_ah, __m, ...) \
646 	do {							\
647 		if ((__m) == HAL_DEBUG_UNMASKABLE ||		\
648 		    ath_hal_debug & (__m) ||			\
649 		    ((_ah) != NULL &&				\
650 		      ((struct ath_hal *) (_ah))->ah_config.ah_debug & (__m))) {	\
651 			DO_HALDEBUG((_ah), (__m), __VA_ARGS__);	\
652 		}						\
653 	} while(0);
654 
655 extern	void DO_HALDEBUG(struct ath_hal *ah, u_int mask, const char* fmt, ...)
656 	__printflike(3,4);
657 #else
658 #define HALDEBUG(_ah, __m, ...)
659 #endif /* AH_DEBUG */
660 
661 /*
662  * Register logging definitions shared with ardecode.
663  */
664 #include "ah_decode.h"
665 
666 /*
667  * Common assertion interface.  Note: it is a bad idea to generate
668  * an assertion failure for any recoverable event.  Instead catch
669  * the violation and, if possible, fix it up or recover from it; either
670  * with an error return value or a diagnostic messages.  System software
671  * does not panic unless the situation is hopeless.
672  */
673 #ifdef AH_ASSERT
674 extern	void ath_hal_assert_failed(const char* filename,
675 		int lineno, const char* msg);
676 
677 #define	HALASSERT(_x) do {					\
678 	if (!(_x)) {						\
679 		ath_hal_assert_failed(__FILE__, __LINE__, #_x);	\
680 	}							\
681 } while (0)
682 #else
683 #define	HALASSERT(_x)
684 #endif /* AH_ASSERT */
685 
686 /*
687  * Regulatory domain support.
688  */
689 
690 /*
691  * Return the max allowed antenna gain and apply any regulatory
692  * domain specific changes.
693  */
694 u_int	ath_hal_getantennareduction(struct ath_hal *ah,
695 	    const struct ieee80211_channel *chan, u_int twiceGain);
696 
697 /*
698  * Return the test group for the specific channel based on
699  * the current regulatory setup.
700  */
701 u_int	ath_hal_getctl(struct ath_hal *, const struct ieee80211_channel *);
702 
703 /*
704  * Map a public channel definition to the corresponding
705  * internal data structure.  This implicitly specifies
706  * whether or not the specified channel is ok to use
707  * based on the current regulatory domain constraints.
708  */
709 #ifndef AH_DEBUG
710 static OS_INLINE HAL_CHANNEL_INTERNAL *
711 ath_hal_checkchannel(struct ath_hal *ah, const struct ieee80211_channel *c)
712 {
713 	HAL_CHANNEL_INTERNAL *cc;
714 
715 	HALASSERT(c->ic_devdata < AH_PRIVATE(ah)->ah_nchan);
716 	cc = &AH_PRIVATE(ah)->ah_channels[c->ic_devdata];
717 	HALASSERT(c->ic_freq == cc->channel || IEEE80211_IS_CHAN_GSM(c));
718 	return cc;
719 }
720 #else
721 /* NB: non-inline version that checks state */
722 HAL_CHANNEL_INTERNAL *ath_hal_checkchannel(struct ath_hal *,
723 		const struct ieee80211_channel *);
724 #endif /* AH_DEBUG */
725 
726 /*
727  * Return the h/w frequency for a channel.  This may be
728  * different from ic_freq if this is a GSM device that
729  * takes 2.4GHz frequencies and down-converts them.
730  */
731 static OS_INLINE uint16_t
732 ath_hal_gethwchannel(struct ath_hal *ah, const struct ieee80211_channel *c)
733 {
734 	return ath_hal_checkchannel(ah, c)->channel;
735 }
736 
737 /*
738  * Generic get/set capability support.  Each chip overrides
739  * this routine to support chip-specific capabilities.
740  */
741 extern	HAL_STATUS ath_hal_getcapability(struct ath_hal *ah,
742 		HAL_CAPABILITY_TYPE type, uint32_t capability,
743 		uint32_t *result);
744 extern	HAL_BOOL ath_hal_setcapability(struct ath_hal *ah,
745 		HAL_CAPABILITY_TYPE type, uint32_t capability,
746 		uint32_t setting, HAL_STATUS *status);
747 
748 /* The diagnostic codes used to be internally defined here -adrian */
749 #include "ah_diagcodes.h"
750 
751 /*
752  * The AR5416 and later HALs have MAC and baseband hang checking.
753  */
754 typedef struct {
755 	uint32_t hang_reg_offset;
756 	uint32_t hang_val;
757 	uint32_t hang_mask;
758 	uint32_t hang_offset;
759 } hal_hw_hang_check_t;
760 
761 typedef struct {
762 	uint32_t dma_dbg_3;
763 	uint32_t dma_dbg_4;
764 	uint32_t dma_dbg_5;
765 	uint32_t dma_dbg_6;
766 } mac_dbg_regs_t;
767 
768 typedef enum {
769 	dcu_chain_state		= 0x1,
770 	dcu_complete_state	= 0x2,
771 	qcu_state		= 0x4,
772 	qcu_fsp_ok		= 0x8,
773 	qcu_fsp_state		= 0x10,
774 	qcu_stitch_state	= 0x20,
775 	qcu_fetch_state		= 0x40,
776 	qcu_complete_state	= 0x80
777 } hal_mac_hangs_t;
778 
779 typedef struct {
780 	int states;
781 	uint8_t dcu_chain_state;
782 	uint8_t dcu_complete_state;
783 	uint8_t qcu_state;
784 	uint8_t qcu_fsp_ok;
785 	uint8_t qcu_fsp_state;
786 	uint8_t qcu_stitch_state;
787 	uint8_t qcu_fetch_state;
788 	uint8_t qcu_complete_state;
789 } hal_mac_hang_check_t;
790 
791 enum {
792     HAL_BB_HANG_DFS		= 0x0001,
793     HAL_BB_HANG_RIFS		= 0x0002,
794     HAL_BB_HANG_RX_CLEAR	= 0x0004,
795     HAL_BB_HANG_UNKNOWN		= 0x0080,
796 
797     HAL_MAC_HANG_SIG1		= 0x0100,
798     HAL_MAC_HANG_SIG2		= 0x0200,
799     HAL_MAC_HANG_UNKNOWN	= 0x8000,
800 
801     HAL_BB_HANGS = HAL_BB_HANG_DFS
802 		 | HAL_BB_HANG_RIFS
803 		 | HAL_BB_HANG_RX_CLEAR
804 		 | HAL_BB_HANG_UNKNOWN,
805     HAL_MAC_HANGS = HAL_MAC_HANG_SIG1
806 		 | HAL_MAC_HANG_SIG2
807 		 | HAL_MAC_HANG_UNKNOWN,
808 };
809 
810 /* Merge these with above */
811 typedef enum hal_hw_hangs {
812     HAL_DFS_BB_HANG_WAR          = 0x1,
813     HAL_RIFS_BB_HANG_WAR         = 0x2,
814     HAL_RX_STUCK_LOW_BB_HANG_WAR = 0x4,
815     HAL_MAC_HANG_WAR             = 0x8,
816     HAL_PHYRESTART_CLR_WAR       = 0x10,
817     HAL_MAC_HANG_DETECTED        = 0x40000000,
818     HAL_BB_HANG_DETECTED         = 0x80000000
819 } hal_hw_hangs_t;
820 
821 /*
822  * Device revision information.
823  */
824 typedef struct {
825 	uint16_t	ah_devid;		/* PCI device ID */
826 	uint16_t	ah_subvendorid;		/* PCI subvendor ID */
827 	uint32_t	ah_macVersion;		/* MAC version id */
828 	uint16_t	ah_macRev;		/* MAC revision */
829 	uint16_t	ah_phyRev;		/* PHY revision */
830 	uint16_t	ah_analog5GhzRev;	/* 2GHz radio revision */
831 	uint16_t	ah_analog2GhzRev;	/* 5GHz radio revision */
832 } HAL_REVS;
833 
834 /*
835  * Argument payload for HAL_DIAG_SETKEY.
836  */
837 typedef struct {
838 	HAL_KEYVAL	dk_keyval;
839 	uint16_t	dk_keyix;	/* key index */
840 	uint8_t		dk_mac[IEEE80211_ADDR_LEN];
841 	int		dk_xor;		/* XOR key data */
842 } HAL_DIAG_KEYVAL;
843 
844 /*
845  * Argument payload for HAL_DIAG_EEWRITE.
846  */
847 typedef struct {
848 	uint16_t	ee_off;		/* eeprom offset */
849 	uint16_t	ee_data;	/* write data */
850 } HAL_DIAG_EEVAL;
851 
852 
853 typedef struct {
854 	u_int offset;		/* reg offset */
855 	uint32_t val;		/* reg value  */
856 } HAL_DIAG_REGVAL;
857 
858 /*
859  * 11n compatibility tweaks.
860  */
861 #define	HAL_DIAG_11N_SERVICES	0x00000003
862 #define	HAL_DIAG_11N_SERVICES_S	0
863 #define	HAL_DIAG_11N_TXSTOMP	0x0000000c
864 #define	HAL_DIAG_11N_TXSTOMP_S	2
865 
866 typedef struct {
867 	int		maxNoiseImmunityLevel;	/* [0..4] */
868 	int		totalSizeDesired[5];
869 	int		coarseHigh[5];
870 	int		coarseLow[5];
871 	int		firpwr[5];
872 
873 	int		maxSpurImmunityLevel;	/* [0..7] */
874 	int		cycPwrThr1[8];
875 
876 	int		maxFirstepLevel;	/* [0..2] */
877 	int		firstep[3];
878 
879 	uint32_t	ofdmTrigHigh;
880 	uint32_t	ofdmTrigLow;
881 	int32_t		cckTrigHigh;
882 	int32_t		cckTrigLow;
883 	int32_t		rssiThrLow;
884 	int32_t		rssiThrHigh;
885 
886 	int		period;			/* update listen period */
887 } HAL_ANI_PARAMS;
888 
889 extern	HAL_BOOL ath_hal_getdiagstate(struct ath_hal *ah, int request,
890 			const void *args, uint32_t argsize,
891 			void **result, uint32_t *resultsize);
892 
893 /*
894  * Setup a h/w rate table for use.
895  */
896 extern	void ath_hal_setupratetable(struct ath_hal *ah, HAL_RATE_TABLE *rt);
897 
898 /*
899  * Common routine for implementing getChanNoise api.
900  */
901 int16_t	ath_hal_getChanNoise(struct ath_hal *, const struct ieee80211_channel *);
902 
903 /*
904  * Initialization support.
905  */
906 typedef struct {
907 	const uint32_t	*data;
908 	int		rows, cols;
909 } HAL_INI_ARRAY;
910 
911 #define	HAL_INI_INIT(_ia, _data, _cols) do {			\
912 	(_ia)->data = (const uint32_t *)(_data);		\
913 	(_ia)->rows = sizeof(_data) / sizeof((_data)[0]);	\
914 	(_ia)->cols = (_cols);					\
915 } while (0)
916 #define	HAL_INI_VAL(_ia, _r, _c) \
917 	((_ia)->data[((_r)*(_ia)->cols) + (_c)])
918 
919 /*
920  * OS_DELAY() does a PIO READ on the PCI bus which allows
921  * other cards' DMA reads to complete in the middle of our reset.
922  */
923 #define DMA_YIELD(x) do {		\
924 	if ((++(x) % 64) == 0)		\
925 		OS_DELAY(1);		\
926 } while (0)
927 
928 #define HAL_INI_WRITE_ARRAY(ah, regArray, col, regWr) do {             	\
929 	int r;								\
930 	for (r = 0; r < N(regArray); r++) {				\
931 		OS_REG_WRITE(ah, (regArray)[r][0], (regArray)[r][col]);	\
932 		DMA_YIELD(regWr);					\
933 	}								\
934 } while (0)
935 
936 #define HAL_INI_WRITE_BANK(ah, regArray, bankData, regWr) do {		\
937 	int r;								\
938 	for (r = 0; r < N(regArray); r++) {				\
939 		OS_REG_WRITE(ah, (regArray)[r][0], (bankData)[r]);	\
940 		DMA_YIELD(regWr);					\
941 	}								\
942 } while (0)
943 
944 extern	int ath_hal_ini_write(struct ath_hal *ah, const HAL_INI_ARRAY *ia,
945 		int col, int regWr);
946 extern	void ath_hal_ini_bank_setup(uint32_t data[], const HAL_INI_ARRAY *ia,
947 		int col);
948 extern	int ath_hal_ini_bank_write(struct ath_hal *ah, const HAL_INI_ARRAY *ia,
949 		const uint32_t data[], int regWr);
950 
951 #define	CCK_SIFS_TIME		10
952 #define	CCK_PREAMBLE_BITS	144
953 #define	CCK_PLCP_BITS		48
954 
955 #define	OFDM_SIFS_TIME		16
956 #define	OFDM_PREAMBLE_TIME	20
957 #define	OFDM_PLCP_BITS		22
958 #define	OFDM_SYMBOL_TIME	4
959 
960 #define	OFDM_HALF_SIFS_TIME	32
961 #define	OFDM_HALF_PREAMBLE_TIME	40
962 #define	OFDM_HALF_PLCP_BITS	22
963 #define	OFDM_HALF_SYMBOL_TIME	8
964 
965 #define	OFDM_QUARTER_SIFS_TIME 		64
966 #define	OFDM_QUARTER_PREAMBLE_TIME	80
967 #define	OFDM_QUARTER_PLCP_BITS		22
968 #define	OFDM_QUARTER_SYMBOL_TIME	16
969 
970 #define	TURBO_SIFS_TIME		8
971 #define	TURBO_PREAMBLE_TIME	14
972 #define	TURBO_PLCP_BITS		22
973 #define	TURBO_SYMBOL_TIME	4
974 
975 #define	WLAN_CTRL_FRAME_SIZE	(2+2+6+4)	/* ACK+FCS */
976 
977 /* Generic EEPROM board value functions */
978 extern	HAL_BOOL ath_ee_getLowerUpperIndex(uint8_t target, uint8_t *pList,
979 	uint16_t listSize, uint16_t *indexL, uint16_t *indexR);
980 extern	HAL_BOOL ath_ee_FillVpdTable(uint8_t pwrMin, uint8_t pwrMax,
981 	uint8_t *pPwrList, uint8_t *pVpdList, uint16_t numIntercepts,
982 	uint8_t *pRetVpdList);
983 extern	int16_t ath_ee_interpolate(uint16_t target, uint16_t srcLeft,
984 	uint16_t srcRight, int16_t targetLeft, int16_t targetRight);
985 
986 /* Whether 5ghz fast clock is needed */
987 /*
988  * The chipset (Merlin, AR9300/later) should set the capability flag below;
989  * this flag simply says that the hardware can do it, not that the EEPROM
990  * says it can.
991  *
992  * Merlin 2.0/2.1 chips with an EEPROM version > 16 do 5ghz fast clock
993  *   if the relevant eeprom flag is set.
994  * Merlin 2.0/2.1 chips with an EEPROM version <= 16 do 5ghz fast clock
995  *   by default.
996  */
997 #define	IS_5GHZ_FAST_CLOCK_EN(_ah, _c) \
998 	(IEEE80211_IS_CHAN_5GHZ(_c) && \
999 	 AH_PRIVATE((_ah))->ah_caps.halSupportsFastClock5GHz && \
1000 	ath_hal_eepromGetFlag((_ah), AR_EEP_FSTCLK_5G))
1001 
1002 /*
1003  * Fetch the maximum regulatory domain power for the given channel
1004  * in 1/2dBm steps.
1005  */
1006 static inline int
1007 ath_hal_get_twice_max_regpower(struct ath_hal_private *ahp,
1008     const HAL_CHANNEL_INTERNAL *ichan, const struct ieee80211_channel *chan)
1009 {
1010 	struct ath_hal *ah = &ahp->h;
1011 
1012 	if (! chan) {
1013 		ath_hal_printf(ah, "%s: called with chan=NULL!\n", __func__);
1014 		return (0);
1015 	}
1016 	return (chan->ic_maxpower);
1017 }
1018 
1019 /*
1020  * Get the maximum antenna gain allowed, in 1/2dBm steps.
1021  */
1022 static inline int
1023 ath_hal_getantennaallowed(struct ath_hal *ah,
1024     const struct ieee80211_channel *chan)
1025 {
1026 
1027 	if (! chan)
1028 		return (0);
1029 
1030 	return (chan->ic_maxantgain);
1031 }
1032 
1033 /*
1034  * Map the given 2GHz channel to an IEEE number.
1035  */
1036 extern	int ath_hal_mhz2ieee_2ghz(struct ath_hal *, int freq);
1037 
1038 /*
1039  * Clear the channel survey data.
1040  */
1041 extern	void ath_hal_survey_clear(struct ath_hal *ah);
1042 
1043 /*
1044  * Add a sample to the channel survey data.
1045  */
1046 extern	void ath_hal_survey_add_sample(struct ath_hal *ah,
1047 	    HAL_SURVEY_SAMPLE *hs);
1048 
1049 /*
1050  * Chip registration - for modules.
1051  */
1052 extern	int ath_hal_add_chip(struct ath_hal_chip *ahc);
1053 extern	int ath_hal_remove_chip(struct ath_hal_chip *ahc);
1054 extern	int ath_hal_add_rf(struct ath_hal_rf *arf);
1055 extern	int ath_hal_remove_rf(struct ath_hal_rf *arf);
1056 
1057 #endif /* _ATH_AH_INTERAL_H_ */
1058