1 /* 2 * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting 3 * Copyright (c) 2002-2008 Atheros Communications, Inc. 4 * 5 * Permission to use, copy, modify, and/or distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 * 17 * $FreeBSD$ 18 */ 19 #include "opt_ah.h" 20 21 #include "ah.h" 22 #include "ah_internal.h" 23 #include "ah_devid.h" 24 25 #include "ar5212/ar5212.h" 26 #include "ar5212/ar5212reg.h" 27 #include "ar5212/ar5212phy.h" 28 29 #include "ah_eeprom_v3.h" 30 31 /* Additional Time delay to wait after activiting the Base band */ 32 #define BASE_ACTIVATE_DELAY 100 /* 100 usec */ 33 #define PLL_SETTLE_DELAY 300 /* 300 usec */ 34 35 static HAL_BOOL ar5212SetResetReg(struct ath_hal *, uint32_t resetMask); 36 /* NB: public for 5312 use */ 37 HAL_BOOL ar5212IsSpurChannel(struct ath_hal *, 38 const struct ieee80211_channel *); 39 HAL_BOOL ar5212ChannelChange(struct ath_hal *, 40 const struct ieee80211_channel *); 41 int16_t ar5212GetNf(struct ath_hal *, struct ieee80211_channel *); 42 HAL_BOOL ar5212SetBoardValues(struct ath_hal *, 43 const struct ieee80211_channel *); 44 void ar5212SetDeltaSlope(struct ath_hal *, 45 const struct ieee80211_channel *); 46 HAL_BOOL ar5212SetTransmitPower(struct ath_hal *ah, 47 const struct ieee80211_channel *chan, uint16_t *rfXpdGain); 48 static HAL_BOOL ar5212SetRateTable(struct ath_hal *, 49 const struct ieee80211_channel *, int16_t tpcScaleReduction, 50 int16_t powerLimit, 51 HAL_BOOL commit, int16_t *minPower, int16_t *maxPower); 52 static void ar5212CorrectGainDelta(struct ath_hal *, int twiceOfdmCckDelta); 53 static void ar5212GetTargetPowers(struct ath_hal *, 54 const struct ieee80211_channel *, 55 const TRGT_POWER_INFO *pPowerInfo, uint16_t numChannels, 56 TRGT_POWER_INFO *pNewPower); 57 static uint16_t ar5212GetMaxEdgePower(uint16_t channel, 58 const RD_EDGES_POWER *pRdEdgesPower); 59 void ar5212SetRateDurationTable(struct ath_hal *, 60 const struct ieee80211_channel *); 61 void ar5212SetIFSTiming(struct ath_hal *, 62 const struct ieee80211_channel *); 63 64 /* NB: public for RF backend use */ 65 void ar5212GetLowerUpperValues(uint16_t value, 66 uint16_t *pList, uint16_t listSize, 67 uint16_t *pLowerValue, uint16_t *pUpperValue); 68 void ar5212ModifyRfBuffer(uint32_t *rfBuf, uint32_t reg32, 69 uint32_t numBits, uint32_t firstBit, uint32_t column); 70 71 static int 72 write_common(struct ath_hal *ah, const HAL_INI_ARRAY *ia, 73 HAL_BOOL bChannelChange, int writes) 74 { 75 #define IS_NO_RESET_TIMER_ADDR(x) \ 76 ( (((x) >= AR_BEACON) && ((x) <= AR_CFP_DUR)) || \ 77 (((x) >= AR_SLEEP1) && ((x) <= AR_SLEEP3))) 78 #define V(r, c) (ia)->data[((r)*(ia)->cols) + (c)] 79 int r; 80 81 /* Write Common Array Parameters */ 82 for (r = 0; r < ia->rows; r++) { 83 uint32_t reg = V(r, 0); 84 /* XXX timer/beacon setup registers? */ 85 /* On channel change, don't reset the PCU registers */ 86 if (!(bChannelChange && IS_NO_RESET_TIMER_ADDR(reg))) { 87 OS_REG_WRITE(ah, reg, V(r, 1)); 88 DMA_YIELD(writes); 89 } 90 } 91 return writes; 92 #undef IS_NO_RESET_TIMER_ADDR 93 #undef V 94 } 95 96 #define IS_DISABLE_FAST_ADC_CHAN(x) (((x) == 2462) || ((x) == 2467)) 97 98 /* 99 * Places the device in and out of reset and then places sane 100 * values in the registers based on EEPROM config, initialization 101 * vectors (as determined by the mode), and station configuration 102 * 103 * bChannelChange is used to preserve DMA/PCU registers across 104 * a HW Reset during channel change. 105 */ 106 HAL_BOOL 107 ar5212Reset(struct ath_hal *ah, HAL_OPMODE opmode, 108 struct ieee80211_channel *chan, 109 HAL_BOOL bChannelChange, HAL_STATUS *status) 110 { 111 #define N(a) (sizeof (a) / sizeof (a[0])) 112 #define FAIL(_code) do { ecode = _code; goto bad; } while (0) 113 struct ath_hal_5212 *ahp = AH5212(ah); 114 HAL_CHANNEL_INTERNAL *ichan = AH_NULL; 115 const HAL_EEPROM *ee; 116 uint32_t softLedCfg, softLedState; 117 uint32_t saveFrameSeqCount, saveDefAntenna, saveLedState; 118 uint32_t macStaId1, synthDelay, txFrm2TxDStart; 119 uint16_t rfXpdGain[MAX_NUM_PDGAINS_PER_CHANNEL]; 120 int16_t cckOfdmPwrDelta = 0; 121 u_int modesIndex, freqIndex; 122 HAL_STATUS ecode; 123 int i, regWrites; 124 uint32_t testReg, powerVal; 125 int8_t twiceAntennaGain, twiceAntennaReduction; 126 uint32_t ackTpcPow, ctsTpcPow, chirpTpcPow; 127 HAL_BOOL isBmode = AH_FALSE; 128 129 HALASSERT(ah->ah_magic == AR5212_MAGIC); 130 ee = AH_PRIVATE(ah)->ah_eeprom; 131 132 OS_MARK(ah, AH_MARK_RESET, bChannelChange); 133 134 /* Bring out of sleep mode */ 135 if (!ar5212SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) { 136 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip did not wakeup\n", 137 __func__); 138 FAIL(HAL_EIO); 139 } 140 141 /* 142 * Map public channel to private. 143 */ 144 ichan = ath_hal_checkchannel(ah, chan); 145 if (ichan == AH_NULL) 146 FAIL(HAL_EINVAL); 147 switch (opmode) { 148 case HAL_M_STA: 149 case HAL_M_IBSS: 150 case HAL_M_HOSTAP: 151 case HAL_M_MONITOR: 152 break; 153 default: 154 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid operating mode %u\n", 155 __func__, opmode); 156 FAIL(HAL_EINVAL); 157 break; 158 } 159 HALASSERT(AH_PRIVATE(ah)->ah_eeversion >= AR_EEPROM_VER3); 160 161 SAVE_CCK(ah, chan, isBmode); 162 163 /* Preserve certain DMA hardware registers on a channel change */ 164 if (bChannelChange) { 165 /* 166 * On Venice, the TSF is almost preserved across a reset; 167 * it requires doubling writes to the RESET_TSF 168 * bit in the AR_BEACON register; it also has the quirk 169 * of the TSF going back in time on the station (station 170 * latches onto the last beacon's tsf during a reset 50% 171 * of the times); the latter is not a problem for adhoc 172 * stations since as long as the TSF is behind, it will 173 * get resynchronized on receiving the next beacon; the 174 * TSF going backwards in time could be a problem for the 175 * sleep operation (supported on infrastructure stations 176 * only) - the best and most general fix for this situation 177 * is to resynchronize the various sleep/beacon timers on 178 * the receipt of the next beacon i.e. when the TSF itself 179 * gets resynchronized to the AP's TSF - power save is 180 * needed to be temporarily disabled until that time 181 * 182 * Need to save the sequence number to restore it after 183 * the reset! 184 */ 185 saveFrameSeqCount = OS_REG_READ(ah, AR_D_SEQNUM); 186 } else 187 saveFrameSeqCount = 0; /* NB: silence compiler */ 188 #if 0 189 /* 190 * XXX disable for now; this appears to sometimes cause OFDM 191 * XXX timing error floods when ani is enabled and bg scanning 192 * XXX kicks in 193 */ 194 /* If the channel change is across the same mode - perform a fast channel change */ 195 if (IS_2413(ah) || IS_5413(ah)) { 196 /* 197 * Fast channel change can only be used when: 198 * -channel change requested - so it's not the initial reset. 199 * -it's not a change to the current channel - 200 * often called when switching modes on a channel 201 * -the modes of the previous and requested channel are the 202 * same 203 * XXX opmode shouldn't change either? 204 */ 205 if (bChannelChange && 206 (AH_PRIVATE(ah)->ah_curchan != AH_NULL) && 207 (chan->ic_freq != AH_PRIVATE(ah)->ah_curchan->ic_freq) && 208 ((chan->ic_flags & IEEE80211_CHAN_ALLTURBO) == 209 (AH_PRIVATE(ah)->ah_curchan->ic_flags & IEEE80211_CHAN_ALLTURBO))) { 210 if (ar5212ChannelChange(ah, chan)) { 211 /* If ChannelChange completed - skip the rest of reset */ 212 /* XXX ani? */ 213 goto done; 214 } 215 } 216 } 217 #endif 218 /* 219 * Preserve the antenna on a channel change 220 */ 221 saveDefAntenna = OS_REG_READ(ah, AR_DEF_ANTENNA); 222 if (saveDefAntenna == 0) /* XXX magic constants */ 223 saveDefAntenna = 1; 224 225 /* Save hardware flag before chip reset clears the register */ 226 macStaId1 = OS_REG_READ(ah, AR_STA_ID1) & 227 (AR_STA_ID1_BASE_RATE_11B | AR_STA_ID1_USE_DEFANT); 228 229 /* Save led state from pci config register */ 230 saveLedState = OS_REG_READ(ah, AR_PCICFG) & 231 (AR_PCICFG_LEDCTL | AR_PCICFG_LEDMODE | AR_PCICFG_LEDBLINK | 232 AR_PCICFG_LEDSLOW); 233 softLedCfg = OS_REG_READ(ah, AR_GPIOCR); 234 softLedState = OS_REG_READ(ah, AR_GPIODO); 235 236 ar5212RestoreClock(ah, opmode); /* move to refclk operation */ 237 238 /* 239 * Adjust gain parameters before reset if 240 * there's an outstanding gain updated. 241 */ 242 (void) ar5212GetRfgain(ah); 243 244 if (!ar5212ChipReset(ah, chan)) { 245 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__); 246 FAIL(HAL_EIO); 247 } 248 249 /* Setup the indices for the next set of register array writes */ 250 if (IEEE80211_IS_CHAN_2GHZ(chan)) { 251 freqIndex = 2; 252 if (IEEE80211_IS_CHAN_108G(chan)) 253 modesIndex = 5; 254 else if (IEEE80211_IS_CHAN_G(chan)) 255 modesIndex = 4; 256 else if (IEEE80211_IS_CHAN_B(chan)) 257 modesIndex = 3; 258 else { 259 HALDEBUG(ah, HAL_DEBUG_ANY, 260 "%s: invalid channel %u/0x%x\n", 261 __func__, chan->ic_freq, chan->ic_flags); 262 FAIL(HAL_EINVAL); 263 } 264 } else { 265 freqIndex = 1; 266 if (IEEE80211_IS_CHAN_TURBO(chan)) 267 modesIndex = 2; 268 else if (IEEE80211_IS_CHAN_A(chan)) 269 modesIndex = 1; 270 else { 271 HALDEBUG(ah, HAL_DEBUG_ANY, 272 "%s: invalid channel %u/0x%x\n", 273 __func__, chan->ic_freq, chan->ic_flags); 274 FAIL(HAL_EINVAL); 275 } 276 } 277 278 OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__); 279 280 /* Set correct Baseband to analog shift setting to access analog chips. */ 281 OS_REG_WRITE(ah, AR_PHY(0), 0x00000007); 282 283 regWrites = ath_hal_ini_write(ah, &ahp->ah_ini_modes, modesIndex, 0); 284 regWrites = write_common(ah, &ahp->ah_ini_common, bChannelChange, 285 regWrites); 286 #ifdef AH_RXCFG_SDMAMW_4BYTES 287 /* 288 * Nala doesn't work with 128 byte bursts on pb42(hydra) (ar71xx), 289 * use 4 instead. Enabling it on all platforms would hurt performance, 290 * so we only enable it on the ones that are affected by it. 291 */ 292 OS_REG_WRITE(ah, AR_RXCFG, 0); 293 #endif 294 ahp->ah_rfHal->writeRegs(ah, modesIndex, freqIndex, regWrites); 295 296 OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__); 297 298 if (IEEE80211_IS_CHAN_HALF(chan) || IEEE80211_IS_CHAN_QUARTER(chan)) { 299 ar5212SetIFSTiming(ah, chan); 300 if (IS_5413(ah)) { 301 /* 302 * Force window_length for 1/2 and 1/4 rate channels, 303 * the ini file sets this to zero otherwise. 304 */ 305 OS_REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL, 306 AR_PHY_FRAME_CTL_WINLEN, 3); 307 } 308 } 309 310 /* Overwrite INI values for revised chipsets */ 311 if (AH_PRIVATE(ah)->ah_phyRev >= AR_PHY_CHIP_ID_REV_2) { 312 /* ADC_CTL */ 313 OS_REG_WRITE(ah, AR_PHY_ADC_CTL, 314 SM(2, AR_PHY_ADC_CTL_OFF_INBUFGAIN) | 315 SM(2, AR_PHY_ADC_CTL_ON_INBUFGAIN) | 316 AR_PHY_ADC_CTL_OFF_PWDDAC | 317 AR_PHY_ADC_CTL_OFF_PWDADC); 318 319 /* TX_PWR_ADJ */ 320 if (ichan->channel == 2484) { 321 cckOfdmPwrDelta = SCALE_OC_DELTA( 322 ee->ee_cckOfdmPwrDelta - 323 ee->ee_scaledCh14FilterCckDelta); 324 } else { 325 cckOfdmPwrDelta = SCALE_OC_DELTA( 326 ee->ee_cckOfdmPwrDelta); 327 } 328 329 if (IEEE80211_IS_CHAN_G(chan)) { 330 OS_REG_WRITE(ah, AR_PHY_TXPWRADJ, 331 SM((ee->ee_cckOfdmPwrDelta*-1), 332 AR_PHY_TXPWRADJ_CCK_GAIN_DELTA) | 333 SM((cckOfdmPwrDelta*-1), 334 AR_PHY_TXPWRADJ_CCK_PCDAC_INDEX)); 335 } else { 336 OS_REG_WRITE(ah, AR_PHY_TXPWRADJ, 0); 337 } 338 339 /* Add barker RSSI thresh enable as disabled */ 340 OS_REG_CLR_BIT(ah, AR_PHY_DAG_CTRLCCK, 341 AR_PHY_DAG_CTRLCCK_EN_RSSI_THR); 342 OS_REG_RMW_FIELD(ah, AR_PHY_DAG_CTRLCCK, 343 AR_PHY_DAG_CTRLCCK_RSSI_THR, 2); 344 345 /* Set the mute mask to the correct default */ 346 OS_REG_WRITE(ah, AR_SEQ_MASK, 0x0000000F); 347 } 348 349 if (AH_PRIVATE(ah)->ah_phyRev >= AR_PHY_CHIP_ID_REV_3) { 350 /* Clear reg to alllow RX_CLEAR line debug */ 351 OS_REG_WRITE(ah, AR_PHY_BLUETOOTH, 0); 352 } 353 if (AH_PRIVATE(ah)->ah_phyRev >= AR_PHY_CHIP_ID_REV_4) { 354 #ifdef notyet 355 /* Enable burst prefetch for the data queues */ 356 OS_REG_RMW_FIELD(ah, AR_D_FPCTL, ... ); 357 /* Enable double-buffering */ 358 OS_REG_CLR_BIT(ah, AR_TXCFG, AR_TXCFG_DBL_BUF_DIS); 359 #endif 360 } 361 362 /* Set ADC/DAC select values */ 363 OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x0e); 364 365 if (IS_5413(ah) || IS_2417(ah)) { 366 uint32_t newReg = 1; 367 if (IS_DISABLE_FAST_ADC_CHAN(ichan->channel)) 368 newReg = 0; 369 /* As it's a clock changing register, only write when the value needs to be changed */ 370 if (OS_REG_READ(ah, AR_PHY_FAST_ADC) != newReg) 371 OS_REG_WRITE(ah, AR_PHY_FAST_ADC, newReg); 372 } 373 374 /* Setup the transmit power values. */ 375 if (!ar5212SetTransmitPower(ah, chan, rfXpdGain)) { 376 HALDEBUG(ah, HAL_DEBUG_ANY, 377 "%s: error init'ing transmit power\n", __func__); 378 FAIL(HAL_EIO); 379 } 380 381 /* Write the analog registers */ 382 if (!ahp->ah_rfHal->setRfRegs(ah, chan, modesIndex, rfXpdGain)) { 383 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: ar5212SetRfRegs failed\n", 384 __func__); 385 FAIL(HAL_EIO); 386 } 387 388 /* Write delta slope for OFDM enabled modes (A, G, Turbo) */ 389 if (IEEE80211_IS_CHAN_OFDM(chan)) { 390 if (IS_5413(ah) || 391 AH_PRIVATE(ah)->ah_eeversion >= AR_EEPROM_VER5_3) 392 ar5212SetSpurMitigation(ah, chan); 393 ar5212SetDeltaSlope(ah, chan); 394 } 395 396 /* Setup board specific options for EEPROM version 3 */ 397 if (!ar5212SetBoardValues(ah, chan)) { 398 HALDEBUG(ah, HAL_DEBUG_ANY, 399 "%s: error setting board options\n", __func__); 400 FAIL(HAL_EIO); 401 } 402 403 /* Restore certain DMA hardware registers on a channel change */ 404 if (bChannelChange) 405 OS_REG_WRITE(ah, AR_D_SEQNUM, saveFrameSeqCount); 406 407 OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__); 408 409 OS_REG_WRITE(ah, AR_STA_ID0, LE_READ_4(ahp->ah_macaddr)); 410 OS_REG_WRITE(ah, AR_STA_ID1, LE_READ_2(ahp->ah_macaddr + 4) 411 | macStaId1 412 | AR_STA_ID1_RTS_USE_DEF 413 | ahp->ah_staId1Defaults 414 ); 415 ar5212SetOperatingMode(ah, opmode); 416 417 /* Set Venice BSSID mask according to current state */ 418 OS_REG_WRITE(ah, AR_BSSMSKL, LE_READ_4(ahp->ah_bssidmask)); 419 OS_REG_WRITE(ah, AR_BSSMSKU, LE_READ_2(ahp->ah_bssidmask + 4)); 420 421 /* Restore previous led state */ 422 OS_REG_WRITE(ah, AR_PCICFG, OS_REG_READ(ah, AR_PCICFG) | saveLedState); 423 424 /* Restore soft Led state to GPIO */ 425 OS_REG_WRITE(ah, AR_GPIOCR, softLedCfg); 426 OS_REG_WRITE(ah, AR_GPIODO, softLedState); 427 428 /* Restore previous antenna */ 429 OS_REG_WRITE(ah, AR_DEF_ANTENNA, saveDefAntenna); 430 431 /* then our BSSID */ 432 OS_REG_WRITE(ah, AR_BSS_ID0, LE_READ_4(ahp->ah_bssid)); 433 OS_REG_WRITE(ah, AR_BSS_ID1, LE_READ_2(ahp->ah_bssid + 4)); 434 435 /* Restore bmiss rssi & count thresholds */ 436 OS_REG_WRITE(ah, AR_RSSI_THR, ahp->ah_rssiThr); 437 438 OS_REG_WRITE(ah, AR_ISR, ~0); /* cleared on write */ 439 440 if (!ar5212SetChannel(ah, chan)) 441 FAIL(HAL_EIO); 442 443 OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__); 444 445 ar5212SetCoverageClass(ah, AH_PRIVATE(ah)->ah_coverageClass, 1); 446 447 ar5212SetRateDurationTable(ah, chan); 448 449 /* Set Tx frame start to tx data start delay */ 450 if (IS_RAD5112_ANY(ah) && 451 (IEEE80211_IS_CHAN_HALF(chan) || IEEE80211_IS_CHAN_QUARTER(chan))) { 452 txFrm2TxDStart = 453 IEEE80211_IS_CHAN_HALF(chan) ? 454 TX_FRAME_D_START_HALF_RATE: 455 TX_FRAME_D_START_QUARTER_RATE; 456 OS_REG_RMW_FIELD(ah, AR_PHY_TX_CTL, 457 AR_PHY_TX_FRAME_TO_TX_DATA_START, txFrm2TxDStart); 458 } 459 460 /* 461 * Setup fast diversity. 462 * Fast diversity can be enabled or disabled via regadd.txt. 463 * Default is enabled. 464 * For reference, 465 * Disable: reg val 466 * 0x00009860 0x00009d18 (if 11a / 11g, else no change) 467 * 0x00009970 0x192bb514 468 * 0x0000a208 0xd03e4648 469 * 470 * Enable: 0x00009860 0x00009d10 (if 11a / 11g, else no change) 471 * 0x00009970 0x192fb514 472 * 0x0000a208 0xd03e6788 473 */ 474 475 /* XXX Setup pre PHY ENABLE EAR additions */ 476 /* 477 * Wait for the frequency synth to settle (synth goes on 478 * via AR_PHY_ACTIVE_EN). Read the phy active delay register. 479 * Value is in 100ns increments. 480 */ 481 synthDelay = OS_REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY; 482 if (IEEE80211_IS_CHAN_B(chan)) { 483 synthDelay = (4 * synthDelay) / 22; 484 } else { 485 synthDelay /= 10; 486 } 487 488 /* Activate the PHY (includes baseband activate and synthesizer on) */ 489 OS_REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); 490 491 /* 492 * There is an issue if the AP starts the calibration before 493 * the base band timeout completes. This could result in the 494 * rx_clear false triggering. As a workaround we add delay an 495 * extra BASE_ACTIVATE_DELAY usecs to ensure this condition 496 * does not happen. 497 */ 498 if (IEEE80211_IS_CHAN_HALF(chan)) { 499 OS_DELAY((synthDelay << 1) + BASE_ACTIVATE_DELAY); 500 } else if (IEEE80211_IS_CHAN_QUARTER(chan)) { 501 OS_DELAY((synthDelay << 2) + BASE_ACTIVATE_DELAY); 502 } else { 503 OS_DELAY(synthDelay + BASE_ACTIVATE_DELAY); 504 } 505 506 /* 507 * The udelay method is not reliable with notebooks. 508 * Need to check to see if the baseband is ready 509 */ 510 testReg = OS_REG_READ(ah, AR_PHY_TESTCTRL); 511 /* Selects the Tx hold */ 512 OS_REG_WRITE(ah, AR_PHY_TESTCTRL, AR_PHY_TESTCTRL_TXHOLD); 513 i = 0; 514 while ((i++ < 20) && 515 (OS_REG_READ(ah, 0x9c24) & 0x10)) /* test if baseband not ready */ OS_DELAY(200); 516 OS_REG_WRITE(ah, AR_PHY_TESTCTRL, testReg); 517 518 /* Calibrate the AGC and start a NF calculation */ 519 OS_REG_WRITE(ah, AR_PHY_AGC_CONTROL, 520 OS_REG_READ(ah, AR_PHY_AGC_CONTROL) 521 | AR_PHY_AGC_CONTROL_CAL 522 | AR_PHY_AGC_CONTROL_NF); 523 524 if (!IEEE80211_IS_CHAN_B(chan) && ahp->ah_bIQCalibration != IQ_CAL_DONE) { 525 /* Start IQ calibration w/ 2^(INIT_IQCAL_LOG_COUNT_MAX+1) samples */ 526 OS_REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4, 527 AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX, 528 INIT_IQCAL_LOG_COUNT_MAX); 529 OS_REG_SET_BIT(ah, AR_PHY_TIMING_CTRL4, 530 AR_PHY_TIMING_CTRL4_DO_IQCAL); 531 ahp->ah_bIQCalibration = IQ_CAL_RUNNING; 532 } else 533 ahp->ah_bIQCalibration = IQ_CAL_INACTIVE; 534 535 /* Setup compression registers */ 536 ar5212SetCompRegs(ah); 537 538 /* Set 1:1 QCU to DCU mapping for all queues */ 539 for (i = 0; i < AR_NUM_DCU; i++) 540 OS_REG_WRITE(ah, AR_DQCUMASK(i), 1 << i); 541 542 ahp->ah_intrTxqs = 0; 543 for (i = 0; i < AH_PRIVATE(ah)->ah_caps.halTotalQueues; i++) 544 ar5212ResetTxQueue(ah, i); 545 546 /* 547 * Setup interrupt handling. Note that ar5212ResetTxQueue 548 * manipulates the secondary IMR's as queues are enabled 549 * and disabled. This is done with RMW ops to insure the 550 * settings we make here are preserved. 551 */ 552 ahp->ah_maskReg = AR_IMR_TXOK | AR_IMR_TXERR | AR_IMR_TXURN 553 | AR_IMR_RXOK | AR_IMR_RXERR | AR_IMR_RXORN 554 | AR_IMR_HIUERR 555 ; 556 if (opmode == HAL_M_HOSTAP) 557 ahp->ah_maskReg |= AR_IMR_MIB; 558 OS_REG_WRITE(ah, AR_IMR, ahp->ah_maskReg); 559 /* Enable bus errors that are OR'd to set the HIUERR bit */ 560 OS_REG_WRITE(ah, AR_IMR_S2, 561 OS_REG_READ(ah, AR_IMR_S2) 562 | AR_IMR_S2_MCABT | AR_IMR_S2_SSERR | AR_IMR_S2_DPERR); 563 564 if (AH_PRIVATE(ah)->ah_rfkillEnabled) 565 ar5212EnableRfKill(ah); 566 567 if (!ath_hal_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL, 0)) { 568 HALDEBUG(ah, HAL_DEBUG_ANY, 569 "%s: offset calibration failed to complete in 1ms;" 570 " noisy environment?\n", __func__); 571 } 572 573 /* 574 * Set clocks back to 32kHz if they had been using refClk, then 575 * use an external 32kHz crystal when sleeping, if one exists. 576 */ 577 ar5212SetupClock(ah, opmode); 578 579 /* 580 * Writing to AR_BEACON will start timers. Hence it should 581 * be the last register to be written. Do not reset tsf, do 582 * not enable beacons at this point, but preserve other values 583 * like beaconInterval. 584 */ 585 OS_REG_WRITE(ah, AR_BEACON, 586 (OS_REG_READ(ah, AR_BEACON) &~ (AR_BEACON_EN | AR_BEACON_RESET_TSF))); 587 588 /* XXX Setup post reset EAR additions */ 589 590 /* QoS support */ 591 if (AH_PRIVATE(ah)->ah_macVersion > AR_SREV_VERSION_VENICE || 592 (AH_PRIVATE(ah)->ah_macVersion == AR_SREV_VERSION_VENICE && 593 AH_PRIVATE(ah)->ah_macRev >= AR_SREV_GRIFFIN_LITE)) { 594 OS_REG_WRITE(ah, AR_QOS_CONTROL, 0x100aa); /* XXX magic */ 595 OS_REG_WRITE(ah, AR_QOS_SELECT, 0x3210); /* XXX magic */ 596 } 597 598 /* Turn on NOACK Support for QoS packets */ 599 OS_REG_WRITE(ah, AR_NOACK, 600 SM(2, AR_NOACK_2BIT_VALUE) | 601 SM(5, AR_NOACK_BIT_OFFSET) | 602 SM(0, AR_NOACK_BYTE_OFFSET)); 603 604 /* Get Antenna Gain reduction */ 605 if (IEEE80211_IS_CHAN_5GHZ(chan)) { 606 ath_hal_eepromGet(ah, AR_EEP_ANTGAINMAX_5, &twiceAntennaGain); 607 } else { 608 ath_hal_eepromGet(ah, AR_EEP_ANTGAINMAX_2, &twiceAntennaGain); 609 } 610 twiceAntennaReduction = 611 ath_hal_getantennareduction(ah, chan, twiceAntennaGain); 612 613 /* TPC for self-generated frames */ 614 615 ackTpcPow = MS(ahp->ah_macTPC, AR_TPC_ACK); 616 if ((ackTpcPow-ahp->ah_txPowerIndexOffset) > chan->ic_maxpower) 617 ackTpcPow = chan->ic_maxpower+ahp->ah_txPowerIndexOffset; 618 619 if (ackTpcPow > (2*chan->ic_maxregpower - twiceAntennaReduction)) 620 ackTpcPow = (2*chan->ic_maxregpower - twiceAntennaReduction) 621 + ahp->ah_txPowerIndexOffset; 622 623 ctsTpcPow = MS(ahp->ah_macTPC, AR_TPC_CTS); 624 if ((ctsTpcPow-ahp->ah_txPowerIndexOffset) > chan->ic_maxpower) 625 ctsTpcPow = chan->ic_maxpower+ahp->ah_txPowerIndexOffset; 626 627 if (ctsTpcPow > (2*chan->ic_maxregpower - twiceAntennaReduction)) 628 ctsTpcPow = (2*chan->ic_maxregpower - twiceAntennaReduction) 629 + ahp->ah_txPowerIndexOffset; 630 631 chirpTpcPow = MS(ahp->ah_macTPC, AR_TPC_CHIRP); 632 if ((chirpTpcPow-ahp->ah_txPowerIndexOffset) > chan->ic_maxpower) 633 chirpTpcPow = chan->ic_maxpower+ahp->ah_txPowerIndexOffset; 634 635 if (chirpTpcPow > (2*chan->ic_maxregpower - twiceAntennaReduction)) 636 chirpTpcPow = (2*chan->ic_maxregpower - twiceAntennaReduction) 637 + ahp->ah_txPowerIndexOffset; 638 639 if (ackTpcPow > 63) 640 ackTpcPow = 63; 641 if (ctsTpcPow > 63) 642 ctsTpcPow = 63; 643 if (chirpTpcPow > 63) 644 chirpTpcPow = 63; 645 646 powerVal = SM(ackTpcPow, AR_TPC_ACK) | 647 SM(ctsTpcPow, AR_TPC_CTS) | 648 SM(chirpTpcPow, AR_TPC_CHIRP); 649 650 OS_REG_WRITE(ah, AR_TPC, powerVal); 651 652 /* Restore user-specified settings */ 653 if (ahp->ah_miscMode != 0) 654 OS_REG_WRITE(ah, AR_MISC_MODE, ahp->ah_miscMode); 655 if (ahp->ah_sifstime != (u_int) -1) 656 ar5212SetSifsTime(ah, ahp->ah_sifstime); 657 if (ahp->ah_slottime != (u_int) -1) 658 ar5212SetSlotTime(ah, ahp->ah_slottime); 659 if (ahp->ah_acktimeout != (u_int) -1) 660 ar5212SetAckTimeout(ah, ahp->ah_acktimeout); 661 if (ahp->ah_ctstimeout != (u_int) -1) 662 ar5212SetCTSTimeout(ah, ahp->ah_ctstimeout); 663 if (AH_PRIVATE(ah)->ah_diagreg != 0) 664 OS_REG_WRITE(ah, AR_DIAG_SW, AH_PRIVATE(ah)->ah_diagreg); 665 666 AH_PRIVATE(ah)->ah_opmode = opmode; /* record operating mode */ 667 #if 0 668 done: 669 #endif 670 if (bChannelChange && !IEEE80211_IS_CHAN_DFS(chan)) 671 chan->ic_state &= ~IEEE80211_CHANSTATE_CWINT; 672 673 HALDEBUG(ah, HAL_DEBUG_RESET, "%s: done\n", __func__); 674 675 RESTORE_CCK(ah, chan, isBmode); 676 677 OS_MARK(ah, AH_MARK_RESET_DONE, 0); 678 679 return AH_TRUE; 680 bad: 681 RESTORE_CCK(ah, chan, isBmode); 682 683 OS_MARK(ah, AH_MARK_RESET_DONE, ecode); 684 if (status != AH_NULL) 685 *status = ecode; 686 return AH_FALSE; 687 #undef FAIL 688 #undef N 689 } 690 691 /* 692 * Call the rf backend to change the channel. 693 */ 694 HAL_BOOL 695 ar5212SetChannel(struct ath_hal *ah, const struct ieee80211_channel *chan) 696 { 697 struct ath_hal_5212 *ahp = AH5212(ah); 698 699 /* Change the synth */ 700 if (!ahp->ah_rfHal->setChannel(ah, chan)) 701 return AH_FALSE; 702 return AH_TRUE; 703 } 704 705 /* 706 * This channel change evaluates whether the selected hardware can 707 * perform a synthesizer-only channel change (no reset). If the 708 * TX is not stopped, or the RFBus cannot be granted in the given 709 * time, the function returns false as a reset is necessary 710 */ 711 HAL_BOOL 712 ar5212ChannelChange(struct ath_hal *ah, const struct ieee80211_channel *chan) 713 { 714 uint32_t ulCount; 715 uint32_t data, synthDelay, qnum; 716 uint16_t rfXpdGain[MAX_NUM_PDGAINS_PER_CHANNEL]; 717 HAL_BOOL txStopped = AH_TRUE; 718 HAL_CHANNEL_INTERNAL *ichan; 719 720 /* 721 * Map public channel to private. 722 */ 723 ichan = ath_hal_checkchannel(ah, chan); 724 725 /* TX must be stopped or RF Bus grant will not work */ 726 for (qnum = 0; qnum < AH_PRIVATE(ah)->ah_caps.halTotalQueues; qnum++) { 727 if (ar5212NumTxPending(ah, qnum)) { 728 txStopped = AH_FALSE; 729 break; 730 } 731 } 732 if (!txStopped) 733 return AH_FALSE; 734 735 /* Kill last Baseband Rx Frame */ 736 OS_REG_WRITE(ah, AR_PHY_RFBUS_REQ, AR_PHY_RFBUS_REQ_REQUEST); /* Request analog bus grant */ 737 for (ulCount = 0; ulCount < 100; ulCount++) { 738 if (OS_REG_READ(ah, AR_PHY_RFBUS_GNT)) 739 break; 740 OS_DELAY(5); 741 } 742 if (ulCount >= 100) 743 return AH_FALSE; 744 745 /* Change the synth */ 746 if (!ar5212SetChannel(ah, chan)) 747 return AH_FALSE; 748 749 /* 750 * Wait for the frequency synth to settle (synth goes on via PHY_ACTIVE_EN). 751 * Read the phy active delay register. Value is in 100ns increments. 752 */ 753 data = OS_REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY; 754 if (IEEE80211_IS_CHAN_B(chan)) { 755 synthDelay = (4 * data) / 22; 756 } else { 757 synthDelay = data / 10; 758 } 759 OS_DELAY(synthDelay + BASE_ACTIVATE_DELAY); 760 761 /* Setup the transmit power values. */ 762 if (!ar5212SetTransmitPower(ah, chan, rfXpdGain)) { 763 HALDEBUG(ah, HAL_DEBUG_ANY, 764 "%s: error init'ing transmit power\n", __func__); 765 return AH_FALSE; 766 } 767 768 /* Write delta slope for OFDM enabled modes (A, G, Turbo) */ 769 if (IEEE80211_IS_CHAN_OFDM(chan)) { 770 if (IS_5413(ah) || 771 AH_PRIVATE(ah)->ah_eeversion >= AR_EEPROM_VER5_3) 772 ar5212SetSpurMitigation(ah, chan); 773 ar5212SetDeltaSlope(ah, chan); 774 } 775 776 /* Release the RFBus Grant */ 777 OS_REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0); 778 779 /* Start Noise Floor Cal */ 780 OS_REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); 781 return AH_TRUE; 782 } 783 784 void 785 ar5212SetOperatingMode(struct ath_hal *ah, int opmode) 786 { 787 uint32_t val; 788 789 val = OS_REG_READ(ah, AR_STA_ID1); 790 val &= ~(AR_STA_ID1_STA_AP | AR_STA_ID1_ADHOC); 791 switch (opmode) { 792 case HAL_M_HOSTAP: 793 OS_REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_STA_AP 794 | AR_STA_ID1_KSRCH_MODE); 795 OS_REG_CLR_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION); 796 break; 797 case HAL_M_IBSS: 798 OS_REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_ADHOC 799 | AR_STA_ID1_KSRCH_MODE); 800 OS_REG_SET_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION); 801 break; 802 case HAL_M_STA: 803 case HAL_M_MONITOR: 804 OS_REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_KSRCH_MODE); 805 break; 806 } 807 } 808 809 /* 810 * Places the PHY and Radio chips into reset. A full reset 811 * must be called to leave this state. The PCI/MAC/PCU are 812 * not placed into reset as we must receive interrupt to 813 * re-enable the hardware. 814 */ 815 HAL_BOOL 816 ar5212PhyDisable(struct ath_hal *ah) 817 { 818 return ar5212SetResetReg(ah, AR_RC_BB); 819 } 820 821 /* 822 * Places all of hardware into reset 823 */ 824 HAL_BOOL 825 ar5212Disable(struct ath_hal *ah) 826 { 827 if (!ar5212SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) 828 return AH_FALSE; 829 /* 830 * Reset the HW - PCI must be reset after the rest of the 831 * device has been reset. 832 */ 833 return ar5212SetResetReg(ah, AR_RC_MAC | AR_RC_BB | AR_RC_PCI); 834 } 835 836 /* 837 * Places the hardware into reset and then pulls it out of reset 838 * 839 * TODO: Only write the PLL if we're changing to or from CCK mode 840 * 841 * WARNING: The order of the PLL and mode registers must be correct. 842 */ 843 HAL_BOOL 844 ar5212ChipReset(struct ath_hal *ah, const struct ieee80211_channel *chan) 845 { 846 847 OS_MARK(ah, AH_MARK_CHIPRESET, chan ? chan->ic_freq : 0); 848 849 /* 850 * Reset the HW - PCI must be reset after the rest of the 851 * device has been reset 852 */ 853 if (!ar5212SetResetReg(ah, AR_RC_MAC | AR_RC_BB | AR_RC_PCI)) 854 return AH_FALSE; 855 856 /* Bring out of sleep mode (AGAIN) */ 857 if (!ar5212SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) 858 return AH_FALSE; 859 860 /* Clear warm reset register */ 861 if (!ar5212SetResetReg(ah, 0)) 862 return AH_FALSE; 863 864 /* 865 * Perform warm reset before the mode/PLL/turbo registers 866 * are changed in order to deactivate the radio. Mode changes 867 * with an active radio can result in corrupted shifts to the 868 * radio device. 869 */ 870 871 /* 872 * Set CCK and Turbo modes correctly. 873 */ 874 if (chan != AH_NULL) { /* NB: can be null during attach */ 875 uint32_t rfMode, phyPLL = 0, curPhyPLL, turbo; 876 877 if (IS_5413(ah)) { /* NB: =>'s 5424 also */ 878 rfMode = AR_PHY_MODE_AR5112; 879 if (IEEE80211_IS_CHAN_HALF(chan)) 880 rfMode |= AR_PHY_MODE_HALF; 881 else if (IEEE80211_IS_CHAN_QUARTER(chan)) 882 rfMode |= AR_PHY_MODE_QUARTER; 883 884 if (IEEE80211_IS_CHAN_CCK(chan)) 885 phyPLL = AR_PHY_PLL_CTL_44_5112; 886 else 887 phyPLL = AR_PHY_PLL_CTL_40_5413; 888 } else if (IS_RAD5111(ah)) { 889 rfMode = AR_PHY_MODE_AR5111; 890 if (IEEE80211_IS_CHAN_CCK(chan)) 891 phyPLL = AR_PHY_PLL_CTL_44; 892 else 893 phyPLL = AR_PHY_PLL_CTL_40; 894 if (IEEE80211_IS_CHAN_HALF(chan)) 895 phyPLL = AR_PHY_PLL_CTL_HALF; 896 else if (IEEE80211_IS_CHAN_QUARTER(chan)) 897 phyPLL = AR_PHY_PLL_CTL_QUARTER; 898 } else { /* 5112, 2413, 2316, 2317 */ 899 rfMode = AR_PHY_MODE_AR5112; 900 if (IEEE80211_IS_CHAN_CCK(chan)) 901 phyPLL = AR_PHY_PLL_CTL_44_5112; 902 else 903 phyPLL = AR_PHY_PLL_CTL_40_5112; 904 if (IEEE80211_IS_CHAN_HALF(chan)) 905 phyPLL |= AR_PHY_PLL_CTL_HALF; 906 else if (IEEE80211_IS_CHAN_QUARTER(chan)) 907 phyPLL |= AR_PHY_PLL_CTL_QUARTER; 908 } 909 if (IEEE80211_IS_CHAN_G(chan)) 910 rfMode |= AR_PHY_MODE_DYNAMIC; 911 else if (IEEE80211_IS_CHAN_OFDM(chan)) 912 rfMode |= AR_PHY_MODE_OFDM; 913 else 914 rfMode |= AR_PHY_MODE_CCK; 915 if (IEEE80211_IS_CHAN_5GHZ(chan)) 916 rfMode |= AR_PHY_MODE_RF5GHZ; 917 else 918 rfMode |= AR_PHY_MODE_RF2GHZ; 919 turbo = IEEE80211_IS_CHAN_TURBO(chan) ? 920 (AR_PHY_FC_TURBO_MODE | AR_PHY_FC_TURBO_SHORT) : 0; 921 curPhyPLL = OS_REG_READ(ah, AR_PHY_PLL_CTL); 922 /* 923 * PLL, Mode, and Turbo values must be written in the correct 924 * order to ensure: 925 * - The PLL cannot be set to 44 unless the CCK or DYNAMIC 926 * mode bit is set 927 * - Turbo cannot be set at the same time as CCK or DYNAMIC 928 */ 929 if (IEEE80211_IS_CHAN_CCK(chan)) { 930 OS_REG_WRITE(ah, AR_PHY_TURBO, turbo); 931 OS_REG_WRITE(ah, AR_PHY_MODE, rfMode); 932 if (curPhyPLL != phyPLL) { 933 OS_REG_WRITE(ah, AR_PHY_PLL_CTL, phyPLL); 934 /* Wait for the PLL to settle */ 935 OS_DELAY(PLL_SETTLE_DELAY); 936 } 937 } else { 938 if (curPhyPLL != phyPLL) { 939 OS_REG_WRITE(ah, AR_PHY_PLL_CTL, phyPLL); 940 /* Wait for the PLL to settle */ 941 OS_DELAY(PLL_SETTLE_DELAY); 942 } 943 OS_REG_WRITE(ah, AR_PHY_TURBO, turbo); 944 OS_REG_WRITE(ah, AR_PHY_MODE, rfMode); 945 } 946 } 947 return AH_TRUE; 948 } 949 950 /* 951 * Recalibrate the lower PHY chips to account for temperature/environment 952 * changes. 953 */ 954 HAL_BOOL 955 ar5212PerCalibrationN(struct ath_hal *ah, 956 struct ieee80211_channel *chan, 957 u_int chainMask, HAL_BOOL longCal, HAL_BOOL *isCalDone) 958 { 959 #define IQ_CAL_TRIES 10 960 struct ath_hal_5212 *ahp = AH5212(ah); 961 HAL_CHANNEL_INTERNAL *ichan; 962 int32_t qCoff, qCoffDenom; 963 int32_t iqCorrMeas, iCoff, iCoffDenom; 964 uint32_t powerMeasQ, powerMeasI; 965 HAL_BOOL isBmode = AH_FALSE; 966 967 OS_MARK(ah, AH_MARK_PERCAL, chan->ic_freq); 968 *isCalDone = AH_FALSE; 969 ichan = ath_hal_checkchannel(ah, chan); 970 if (ichan == AH_NULL) { 971 HALDEBUG(ah, HAL_DEBUG_ANY, 972 "%s: invalid channel %u/0x%x; no mapping\n", 973 __func__, chan->ic_freq, chan->ic_flags); 974 return AH_FALSE; 975 } 976 SAVE_CCK(ah, chan, isBmode); 977 978 if (ahp->ah_bIQCalibration == IQ_CAL_DONE || 979 ahp->ah_bIQCalibration == IQ_CAL_INACTIVE) 980 *isCalDone = AH_TRUE; 981 982 /* IQ calibration in progress. Check to see if it has finished. */ 983 if (ahp->ah_bIQCalibration == IQ_CAL_RUNNING && 984 !(OS_REG_READ(ah, AR_PHY_TIMING_CTRL4) & AR_PHY_TIMING_CTRL4_DO_IQCAL)) { 985 int i; 986 987 /* IQ Calibration has finished. */ 988 ahp->ah_bIQCalibration = IQ_CAL_INACTIVE; 989 *isCalDone = AH_TRUE; 990 991 /* workaround for misgated IQ Cal results */ 992 i = 0; 993 do { 994 /* Read calibration results. */ 995 powerMeasI = OS_REG_READ(ah, AR_PHY_IQCAL_RES_PWR_MEAS_I); 996 powerMeasQ = OS_REG_READ(ah, AR_PHY_IQCAL_RES_PWR_MEAS_Q); 997 iqCorrMeas = OS_REG_READ(ah, AR_PHY_IQCAL_RES_IQ_CORR_MEAS); 998 if (powerMeasI && powerMeasQ) 999 break; 1000 /* Do we really need this??? */ 1001 OS_REG_SET_BIT(ah, AR_PHY_TIMING_CTRL4, 1002 AR_PHY_TIMING_CTRL4_DO_IQCAL); 1003 } while (++i < IQ_CAL_TRIES); 1004 1005 HALDEBUG(ah, HAL_DEBUG_PERCAL, 1006 "%s: IQ cal finished: %d tries\n", __func__, i); 1007 HALDEBUG(ah, HAL_DEBUG_PERCAL, 1008 "%s: powerMeasI %u powerMeasQ %u iqCorrMeas %d\n", 1009 __func__, powerMeasI, powerMeasQ, iqCorrMeas); 1010 1011 /* 1012 * Prescale these values to remove 64-bit operation 1013 * requirement at the loss of a little precision. 1014 */ 1015 iCoffDenom = (powerMeasI / 2 + powerMeasQ / 2) / 128; 1016 qCoffDenom = powerMeasQ / 128; 1017 1018 /* Protect against divide-by-0 and loss of sign bits. */ 1019 if (iCoffDenom != 0 && qCoffDenom >= 2) { 1020 iCoff = (int8_t)(-iqCorrMeas) / iCoffDenom; 1021 /* IQCORR_Q_I_COFF is a signed 6 bit number */ 1022 if (iCoff < -32) { 1023 iCoff = -32; 1024 } else if (iCoff > 31) { 1025 iCoff = 31; 1026 } 1027 1028 /* IQCORR_Q_Q_COFF is a signed 5 bit number */ 1029 qCoff = (powerMeasI / qCoffDenom) - 128; 1030 if (qCoff < -16) { 1031 qCoff = -16; 1032 } else if (qCoff > 15) { 1033 qCoff = 15; 1034 } 1035 1036 HALDEBUG(ah, HAL_DEBUG_PERCAL, 1037 "%s: iCoff %d qCoff %d\n", __func__, iCoff, qCoff); 1038 1039 /* Write values and enable correction */ 1040 OS_REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4, 1041 AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF, iCoff); 1042 OS_REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4, 1043 AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF, qCoff); 1044 OS_REG_SET_BIT(ah, AR_PHY_TIMING_CTRL4, 1045 AR_PHY_TIMING_CTRL4_IQCORR_ENABLE); 1046 1047 ahp->ah_bIQCalibration = IQ_CAL_DONE; 1048 ichan->privFlags |= CHANNEL_IQVALID; 1049 ichan->iCoff = iCoff; 1050 ichan->qCoff = qCoff; 1051 } 1052 } else if (!IEEE80211_IS_CHAN_B(chan) && 1053 ahp->ah_bIQCalibration == IQ_CAL_DONE && 1054 (ichan->privFlags & CHANNEL_IQVALID) == 0) { 1055 /* 1056 * Start IQ calibration if configured channel has changed. 1057 * Use a magic number of 15 based on default value. 1058 */ 1059 OS_REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4, 1060 AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX, 1061 INIT_IQCAL_LOG_COUNT_MAX); 1062 OS_REG_SET_BIT(ah, AR_PHY_TIMING_CTRL4, 1063 AR_PHY_TIMING_CTRL4_DO_IQCAL); 1064 ahp->ah_bIQCalibration = IQ_CAL_RUNNING; 1065 } 1066 /* XXX EAR */ 1067 1068 if (longCal) { 1069 /* Check noise floor results */ 1070 ar5212GetNf(ah, chan); 1071 if (!IEEE80211_IS_CHAN_CWINT(chan)) { 1072 /* Perform cal for 5Ghz channels and any OFDM on 5112 */ 1073 if (IEEE80211_IS_CHAN_5GHZ(chan) || 1074 (IS_RAD5112(ah) && IEEE80211_IS_CHAN_OFDM(chan))) 1075 ar5212RequestRfgain(ah); 1076 } 1077 } 1078 RESTORE_CCK(ah, chan, isBmode); 1079 1080 return AH_TRUE; 1081 #undef IQ_CAL_TRIES 1082 } 1083 1084 HAL_BOOL 1085 ar5212PerCalibration(struct ath_hal *ah, struct ieee80211_channel *chan, 1086 HAL_BOOL *isIQdone) 1087 { 1088 return ar5212PerCalibrationN(ah, chan, 0x1, AH_TRUE, isIQdone); 1089 } 1090 1091 HAL_BOOL 1092 ar5212ResetCalValid(struct ath_hal *ah, const struct ieee80211_channel *chan) 1093 { 1094 HAL_CHANNEL_INTERNAL *ichan; 1095 1096 ichan = ath_hal_checkchannel(ah, chan); 1097 if (ichan == AH_NULL) { 1098 HALDEBUG(ah, HAL_DEBUG_ANY, 1099 "%s: invalid channel %u/0x%x; no mapping\n", 1100 __func__, chan->ic_freq, chan->ic_flags); 1101 return AH_FALSE; 1102 } 1103 ichan->privFlags &= ~CHANNEL_IQVALID; 1104 return AH_TRUE; 1105 } 1106 1107 /* 1108 * Write the given reset bit mask into the reset register 1109 */ 1110 static HAL_BOOL 1111 ar5212SetResetReg(struct ath_hal *ah, uint32_t resetMask) 1112 { 1113 uint32_t mask = resetMask ? resetMask : ~0; 1114 HAL_BOOL rt; 1115 1116 /* XXX ar5212MacStop & co. */ 1117 1118 if (AH_PRIVATE(ah)->ah_ispcie) { 1119 resetMask &= ~AR_RC_PCI; 1120 } 1121 1122 (void) OS_REG_READ(ah, AR_RXDP);/* flush any pending MMR writes */ 1123 OS_REG_WRITE(ah, AR_RC, resetMask); 1124 OS_DELAY(15); /* need to wait at least 128 clocks 1125 when reseting PCI before read */ 1126 mask &= (AR_RC_MAC | AR_RC_BB); 1127 resetMask &= (AR_RC_MAC | AR_RC_BB); 1128 rt = ath_hal_wait(ah, AR_RC, mask, resetMask); 1129 if ((resetMask & AR_RC_MAC) == 0) { 1130 if (isBigEndian()) { 1131 /* 1132 * Set CFG, little-endian for register 1133 * and descriptor accesses. 1134 */ 1135 mask = INIT_CONFIG_STATUS | AR_CFG_SWRD | AR_CFG_SWRG; 1136 #ifndef AH_NEED_DESC_SWAP 1137 mask |= AR_CFG_SWTD; 1138 #endif 1139 OS_REG_WRITE(ah, AR_CFG, LE_READ_4(&mask)); 1140 } else 1141 OS_REG_WRITE(ah, AR_CFG, INIT_CONFIG_STATUS); 1142 if (ar5212SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) 1143 (void) OS_REG_READ(ah, AR_ISR_RAC); 1144 } 1145 1146 /* track PHY power state so we don't try to r/w BB registers */ 1147 AH5212(ah)->ah_phyPowerOn = ((resetMask & AR_RC_BB) == 0); 1148 return rt; 1149 } 1150 1151 int16_t 1152 ar5212GetNoiseFloor(struct ath_hal *ah) 1153 { 1154 int16_t nf = (OS_REG_READ(ah, AR_PHY(25)) >> 19) & 0x1ff; 1155 if (nf & 0x100) 1156 nf = 0 - ((nf ^ 0x1ff) + 1); 1157 return nf; 1158 } 1159 1160 static HAL_BOOL 1161 getNoiseFloorThresh(struct ath_hal *ah, const struct ieee80211_channel *chan, 1162 int16_t *nft) 1163 { 1164 const HAL_EEPROM *ee = AH_PRIVATE(ah)->ah_eeprom; 1165 1166 HALASSERT(ah->ah_magic == AR5212_MAGIC); 1167 1168 switch (chan->ic_flags & IEEE80211_CHAN_ALLFULL) { 1169 case IEEE80211_CHAN_A: 1170 *nft = ee->ee_noiseFloorThresh[headerInfo11A]; 1171 break; 1172 case IEEE80211_CHAN_B: 1173 *nft = ee->ee_noiseFloorThresh[headerInfo11B]; 1174 break; 1175 case IEEE80211_CHAN_G: 1176 case IEEE80211_CHAN_PUREG: /* NB: really 108G */ 1177 *nft = ee->ee_noiseFloorThresh[headerInfo11G]; 1178 break; 1179 default: 1180 HALDEBUG(ah, HAL_DEBUG_ANY, 1181 "%s: invalid channel flags %u/0x%x\n", 1182 __func__, chan->ic_freq, chan->ic_flags); 1183 return AH_FALSE; 1184 } 1185 return AH_TRUE; 1186 } 1187 1188 /* 1189 * Setup the noise floor cal history buffer. 1190 */ 1191 void 1192 ar5212InitNfCalHistBuffer(struct ath_hal *ah) 1193 { 1194 struct ath_hal_5212 *ahp = AH5212(ah); 1195 int i; 1196 1197 ahp->ah_nfCalHist.first_run = 1; 1198 ahp->ah_nfCalHist.currIndex = 0; 1199 ahp->ah_nfCalHist.privNF = AR5212_CCA_MAX_GOOD_VALUE; 1200 ahp->ah_nfCalHist.invalidNFcount = AR512_NF_CAL_HIST_MAX; 1201 for (i = 0; i < AR512_NF_CAL_HIST_MAX; i ++) 1202 ahp->ah_nfCalHist.nfCalBuffer[i] = AR5212_CCA_MAX_GOOD_VALUE; 1203 } 1204 1205 /* 1206 * Add a noise floor value to the ring buffer. 1207 */ 1208 static __inline void 1209 updateNFHistBuff(struct ar5212NfCalHist *h, int16_t nf) 1210 { 1211 h->nfCalBuffer[h->currIndex] = nf; 1212 if (++h->currIndex >= AR512_NF_CAL_HIST_MAX) 1213 h->currIndex = 0; 1214 } 1215 1216 /* 1217 * Return the median noise floor value in the ring buffer. 1218 */ 1219 int16_t 1220 ar5212GetNfHistMid(const int16_t calData[AR512_NF_CAL_HIST_MAX]) 1221 { 1222 int16_t sort[AR512_NF_CAL_HIST_MAX]; 1223 int i, j; 1224 1225 OS_MEMCPY(sort, calData, AR512_NF_CAL_HIST_MAX*sizeof(int16_t)); 1226 for (i = 0; i < AR512_NF_CAL_HIST_MAX-1; i ++) { 1227 for (j = 1; j < AR512_NF_CAL_HIST_MAX-i; j ++) { 1228 if (sort[j] > sort[j-1]) { 1229 int16_t nf = sort[j]; 1230 sort[j] = sort[j-1]; 1231 sort[j-1] = nf; 1232 } 1233 } 1234 } 1235 return sort[(AR512_NF_CAL_HIST_MAX-1)>>1]; 1236 } 1237 1238 /* 1239 * Read the NF and check it against the noise floor threshhold 1240 */ 1241 int16_t 1242 ar5212GetNf(struct ath_hal *ah, struct ieee80211_channel *chan) 1243 { 1244 struct ath_hal_5212 *ahp = AH5212(ah); 1245 struct ar5212NfCalHist *h = &ahp->ah_nfCalHist; 1246 HAL_CHANNEL_INTERNAL *ichan = ath_hal_checkchannel(ah, chan); 1247 int16_t nf, nfThresh; 1248 int32_t val; 1249 1250 if (OS_REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF) { 1251 HALDEBUG(ah, HAL_DEBUG_ANY, 1252 "%s: NF did not complete in calibration window\n", __func__); 1253 ichan->rawNoiseFloor = h->privNF; /* most recent value */ 1254 return ichan->rawNoiseFloor; 1255 } 1256 1257 /* 1258 * Finished NF cal, check against threshold. 1259 */ 1260 nf = ar5212GetNoiseFloor(ah); 1261 if (getNoiseFloorThresh(ah, chan, &nfThresh)) { 1262 if (nf > nfThresh) { 1263 HALDEBUG(ah, HAL_DEBUG_ANY, 1264 "%s: noise floor failed detected; detected %u, " 1265 "threshold %u\n", __func__, nf, nfThresh); 1266 /* 1267 * NB: Don't discriminate 2.4 vs 5Ghz, if this 1268 * happens it indicates a problem regardless 1269 * of the band. 1270 */ 1271 chan->ic_state |= IEEE80211_CHANSTATE_CWINT; 1272 nf = 0; 1273 } 1274 } else 1275 nf = 0; 1276 1277 /* 1278 * Pass through histogram and write median value as 1279 * calculated from the accrued window. We require a 1280 * full window of in-range values to be seen before we 1281 * start using the history. 1282 */ 1283 updateNFHistBuff(h, nf); 1284 if (h->first_run) { 1285 if (nf < AR5212_CCA_MIN_BAD_VALUE || 1286 nf > AR5212_CCA_MAX_HIGH_VALUE) { 1287 nf = AR5212_CCA_MAX_GOOD_VALUE; 1288 h->invalidNFcount = AR512_NF_CAL_HIST_MAX; 1289 } else if (--(h->invalidNFcount) == 0) { 1290 h->first_run = 0; 1291 h->privNF = nf = ar5212GetNfHistMid(h->nfCalBuffer); 1292 } else { 1293 nf = AR5212_CCA_MAX_GOOD_VALUE; 1294 } 1295 } else { 1296 h->privNF = nf = ar5212GetNfHistMid(h->nfCalBuffer); 1297 } 1298 1299 val = OS_REG_READ(ah, AR_PHY(25)); 1300 val &= 0xFFFFFE00; 1301 val |= (((uint32_t)nf << 1) & 0x1FF); 1302 OS_REG_WRITE(ah, AR_PHY(25), val); 1303 OS_REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_ENABLE_NF); 1304 OS_REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NO_UPDATE_NF); 1305 OS_REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); 1306 1307 if (!ath_hal_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF, 0)) { 1308 #ifdef AH_DEBUG 1309 ath_hal_printf(ah, "%s: AGC not ready AGC_CONTROL 0x%x\n", 1310 __func__, OS_REG_READ(ah, AR_PHY_AGC_CONTROL)); 1311 #endif 1312 } 1313 1314 /* 1315 * Now load a high maxCCAPower value again so that we're 1316 * not capped by the median we just loaded 1317 */ 1318 val &= 0xFFFFFE00; 1319 val |= (((uint32_t)(-50) << 1) & 0x1FF); 1320 OS_REG_WRITE(ah, AR_PHY(25), val); 1321 OS_REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_ENABLE_NF); 1322 OS_REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NO_UPDATE_NF); 1323 OS_REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); 1324 1325 return (ichan->rawNoiseFloor = nf); 1326 } 1327 1328 /* 1329 * Set up compression configuration registers 1330 */ 1331 void 1332 ar5212SetCompRegs(struct ath_hal *ah) 1333 { 1334 struct ath_hal_5212 *ahp = AH5212(ah); 1335 int i; 1336 1337 /* Check if h/w supports compression */ 1338 if (!AH_PRIVATE(ah)->ah_caps.halCompressSupport) 1339 return; 1340 1341 OS_REG_WRITE(ah, AR_DCCFG, 1); 1342 1343 OS_REG_WRITE(ah, AR_CCFG, 1344 (AR_COMPRESSION_WINDOW_SIZE >> 8) & AR_CCFG_WIN_M); 1345 1346 OS_REG_WRITE(ah, AR_CCFG, 1347 OS_REG_READ(ah, AR_CCFG) | AR_CCFG_MIB_INT_EN); 1348 OS_REG_WRITE(ah, AR_CCUCFG, 1349 AR_CCUCFG_RESET_VAL | AR_CCUCFG_CATCHUP_EN); 1350 1351 OS_REG_WRITE(ah, AR_CPCOVF, 0); 1352 1353 /* reset decompression mask */ 1354 for (i = 0; i < HAL_DECOMP_MASK_SIZE; i++) { 1355 OS_REG_WRITE(ah, AR_DCM_A, i); 1356 OS_REG_WRITE(ah, AR_DCM_D, ahp->ah_decompMask[i]); 1357 } 1358 } 1359 1360 HAL_BOOL 1361 ar5212SetAntennaSwitchInternal(struct ath_hal *ah, HAL_ANT_SETTING settings, 1362 const struct ieee80211_channel *chan) 1363 { 1364 #define ANT_SWITCH_TABLE1 AR_PHY(88) 1365 #define ANT_SWITCH_TABLE2 AR_PHY(89) 1366 struct ath_hal_5212 *ahp = AH5212(ah); 1367 const HAL_EEPROM *ee = AH_PRIVATE(ah)->ah_eeprom; 1368 uint32_t antSwitchA, antSwitchB; 1369 int ix; 1370 1371 HALASSERT(ah->ah_magic == AR5212_MAGIC); 1372 HALASSERT(ahp->ah_phyPowerOn); 1373 1374 switch (chan->ic_flags & IEEE80211_CHAN_ALLFULL) { 1375 case IEEE80211_CHAN_A: 1376 ix = 0; 1377 break; 1378 case IEEE80211_CHAN_G: 1379 case IEEE80211_CHAN_PUREG: /* NB: 108G */ 1380 ix = 2; 1381 break; 1382 case IEEE80211_CHAN_B: 1383 if (IS_2425(ah) || IS_2417(ah)) { 1384 /* NB: Nala/Swan: 11b is handled using 11g */ 1385 ix = 2; 1386 } else 1387 ix = 1; 1388 break; 1389 default: 1390 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid channel flags 0x%x\n", 1391 __func__, chan->ic_flags); 1392 return AH_FALSE; 1393 } 1394 1395 antSwitchA = ee->ee_antennaControl[1][ix] 1396 | (ee->ee_antennaControl[2][ix] << 6) 1397 | (ee->ee_antennaControl[3][ix] << 12) 1398 | (ee->ee_antennaControl[4][ix] << 18) 1399 | (ee->ee_antennaControl[5][ix] << 24) 1400 ; 1401 antSwitchB = ee->ee_antennaControl[6][ix] 1402 | (ee->ee_antennaControl[7][ix] << 6) 1403 | (ee->ee_antennaControl[8][ix] << 12) 1404 | (ee->ee_antennaControl[9][ix] << 18) 1405 | (ee->ee_antennaControl[10][ix] << 24) 1406 ; 1407 /* 1408 * For fixed antenna, give the same setting for both switch banks 1409 */ 1410 switch (settings) { 1411 case HAL_ANT_FIXED_A: 1412 antSwitchB = antSwitchA; 1413 break; 1414 case HAL_ANT_FIXED_B: 1415 antSwitchA = antSwitchB; 1416 break; 1417 case HAL_ANT_VARIABLE: 1418 break; 1419 default: 1420 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad antenna setting %u\n", 1421 __func__, settings); 1422 return AH_FALSE; 1423 } 1424 if (antSwitchB == antSwitchA) { 1425 HALDEBUG(ah, HAL_DEBUG_RFPARAM, 1426 "%s: Setting fast diversity off.\n", __func__); 1427 OS_REG_CLR_BIT(ah,AR_PHY_CCK_DETECT, 1428 AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV); 1429 ahp->ah_diversity = AH_FALSE; 1430 } else { 1431 HALDEBUG(ah, HAL_DEBUG_RFPARAM, 1432 "%s: Setting fast diversity on.\n", __func__); 1433 OS_REG_SET_BIT(ah,AR_PHY_CCK_DETECT, 1434 AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV); 1435 ahp->ah_diversity = AH_TRUE; 1436 } 1437 ahp->ah_antControl = settings; 1438 1439 OS_REG_WRITE(ah, ANT_SWITCH_TABLE1, antSwitchA); 1440 OS_REG_WRITE(ah, ANT_SWITCH_TABLE2, antSwitchB); 1441 1442 return AH_TRUE; 1443 #undef ANT_SWITCH_TABLE2 1444 #undef ANT_SWITCH_TABLE1 1445 } 1446 1447 HAL_BOOL 1448 ar5212IsSpurChannel(struct ath_hal *ah, const struct ieee80211_channel *chan) 1449 { 1450 uint16_t freq = ath_hal_gethwchannel(ah, chan); 1451 uint32_t clockFreq = 1452 ((IS_5413(ah) || IS_RAD5112_ANY(ah) || IS_2417(ah)) ? 40 : 32); 1453 return ( ((freq % clockFreq) != 0) 1454 && (((freq % clockFreq) < 10) 1455 || (((freq) % clockFreq) > 22)) ); 1456 } 1457 1458 /* 1459 * Read EEPROM header info and program the device for correct operation 1460 * given the channel value. 1461 */ 1462 HAL_BOOL 1463 ar5212SetBoardValues(struct ath_hal *ah, const struct ieee80211_channel *chan) 1464 { 1465 #define NO_FALSE_DETECT_BACKOFF 2 1466 #define CB22_FALSE_DETECT_BACKOFF 6 1467 #define AR_PHY_BIS(_ah, _reg, _mask, _val) \ 1468 OS_REG_WRITE(_ah, AR_PHY(_reg), \ 1469 (OS_REG_READ(_ah, AR_PHY(_reg)) & _mask) | (_val)); 1470 struct ath_hal_5212 *ahp = AH5212(ah); 1471 const HAL_EEPROM *ee = AH_PRIVATE(ah)->ah_eeprom; 1472 int arrayMode, falseDectectBackoff; 1473 int is2GHz = IEEE80211_IS_CHAN_2GHZ(chan); 1474 HAL_CHANNEL_INTERNAL *ichan = ath_hal_checkchannel(ah, chan); 1475 int8_t adcDesiredSize, pgaDesiredSize; 1476 uint16_t switchSettling, txrxAtten, rxtxMargin; 1477 int iCoff, qCoff; 1478 1479 HALASSERT(ah->ah_magic == AR5212_MAGIC); 1480 1481 switch (chan->ic_flags & IEEE80211_CHAN_ALLTURBOFULL) { 1482 case IEEE80211_CHAN_A: 1483 case IEEE80211_CHAN_ST: 1484 arrayMode = headerInfo11A; 1485 if (!IS_RAD5112_ANY(ah) && !IS_2413(ah) && !IS_5413(ah)) 1486 OS_REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL, 1487 AR_PHY_FRAME_CTL_TX_CLIP, 1488 ahp->ah_gainValues.currStep->paramVal[GP_TXCLIP]); 1489 break; 1490 case IEEE80211_CHAN_B: 1491 arrayMode = headerInfo11B; 1492 break; 1493 case IEEE80211_CHAN_G: 1494 case IEEE80211_CHAN_108G: 1495 arrayMode = headerInfo11G; 1496 break; 1497 default: 1498 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid channel flags 0x%x\n", 1499 __func__, chan->ic_flags); 1500 return AH_FALSE; 1501 } 1502 1503 /* Set the antenna register(s) correctly for the chip revision */ 1504 AR_PHY_BIS(ah, 68, 0xFFFFFC06, 1505 (ee->ee_antennaControl[0][arrayMode] << 4) | 0x1); 1506 1507 ar5212SetAntennaSwitchInternal(ah, ahp->ah_antControl, chan); 1508 1509 /* Set the Noise Floor Thresh on ar5211 devices */ 1510 OS_REG_WRITE(ah, AR_PHY(90), 1511 (ee->ee_noiseFloorThresh[arrayMode] & 0x1FF) 1512 | (1 << 9)); 1513 1514 if (ee->ee_version >= AR_EEPROM_VER5_0 && IEEE80211_IS_CHAN_TURBO(chan)) { 1515 switchSettling = ee->ee_switchSettlingTurbo[is2GHz]; 1516 adcDesiredSize = ee->ee_adcDesiredSizeTurbo[is2GHz]; 1517 pgaDesiredSize = ee->ee_pgaDesiredSizeTurbo[is2GHz]; 1518 txrxAtten = ee->ee_txrxAttenTurbo[is2GHz]; 1519 rxtxMargin = ee->ee_rxtxMarginTurbo[is2GHz]; 1520 } else { 1521 switchSettling = ee->ee_switchSettling[arrayMode]; 1522 adcDesiredSize = ee->ee_adcDesiredSize[arrayMode]; 1523 pgaDesiredSize = ee->ee_pgaDesiredSize[is2GHz]; 1524 txrxAtten = ee->ee_txrxAtten[is2GHz]; 1525 rxtxMargin = ee->ee_rxtxMargin[is2GHz]; 1526 } 1527 1528 OS_REG_RMW_FIELD(ah, AR_PHY_SETTLING, 1529 AR_PHY_SETTLING_SWITCH, switchSettling); 1530 OS_REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ, 1531 AR_PHY_DESIRED_SZ_ADC, adcDesiredSize); 1532 OS_REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ, 1533 AR_PHY_DESIRED_SZ_PGA, pgaDesiredSize); 1534 OS_REG_RMW_FIELD(ah, AR_PHY_RXGAIN, 1535 AR_PHY_RXGAIN_TXRX_ATTEN, txrxAtten); 1536 OS_REG_WRITE(ah, AR_PHY(13), 1537 (ee->ee_txEndToXPAOff[arrayMode] << 24) 1538 | (ee->ee_txEndToXPAOff[arrayMode] << 16) 1539 | (ee->ee_txFrameToXPAOn[arrayMode] << 8) 1540 | ee->ee_txFrameToXPAOn[arrayMode]); 1541 AR_PHY_BIS(ah, 10, 0xFFFF00FF, 1542 ee->ee_txEndToXLNAOn[arrayMode] << 8); 1543 AR_PHY_BIS(ah, 25, 0xFFF80FFF, 1544 (ee->ee_thresh62[arrayMode] << 12) & 0x7F000); 1545 1546 /* 1547 * False detect backoff - suspected 32 MHz spur causes false 1548 * detects in OFDM, causing Tx Hangs. Decrease weak signal 1549 * sensitivity for this card. 1550 */ 1551 falseDectectBackoff = NO_FALSE_DETECT_BACKOFF; 1552 if (ee->ee_version < AR_EEPROM_VER3_3) { 1553 /* XXX magic number */ 1554 if (AH_PRIVATE(ah)->ah_subvendorid == 0x1022 && 1555 IEEE80211_IS_CHAN_OFDM(chan)) 1556 falseDectectBackoff += CB22_FALSE_DETECT_BACKOFF; 1557 } else { 1558 if (ar5212IsSpurChannel(ah, chan)) 1559 falseDectectBackoff += ee->ee_falseDetectBackoff[arrayMode]; 1560 } 1561 AR_PHY_BIS(ah, 73, 0xFFFFFF01, (falseDectectBackoff << 1) & 0xFE); 1562 1563 if (ichan->privFlags & CHANNEL_IQVALID) { 1564 iCoff = ichan->iCoff; 1565 qCoff = ichan->qCoff; 1566 } else { 1567 iCoff = ee->ee_iqCalI[is2GHz]; 1568 qCoff = ee->ee_iqCalQ[is2GHz]; 1569 } 1570 1571 /* write previous IQ results */ 1572 OS_REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4, 1573 AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF, iCoff); 1574 OS_REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4, 1575 AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF, qCoff); 1576 OS_REG_SET_BIT(ah, AR_PHY_TIMING_CTRL4, 1577 AR_PHY_TIMING_CTRL4_IQCORR_ENABLE); 1578 1579 if (ee->ee_version >= AR_EEPROM_VER4_1) { 1580 if (!IEEE80211_IS_CHAN_108G(chan) || ee->ee_version >= AR_EEPROM_VER5_0) 1581 OS_REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ, 1582 AR_PHY_GAIN_2GHZ_RXTX_MARGIN, rxtxMargin); 1583 } 1584 if (ee->ee_version >= AR_EEPROM_VER5_1) { 1585 /* for now always disabled */ 1586 OS_REG_WRITE(ah, AR_PHY_HEAVY_CLIP_ENABLE, 0); 1587 } 1588 1589 return AH_TRUE; 1590 #undef AR_PHY_BIS 1591 #undef NO_FALSE_DETECT_BACKOFF 1592 #undef CB22_FALSE_DETECT_BACKOFF 1593 } 1594 1595 /* 1596 * Apply Spur Immunity to Boards that require it. 1597 * Applies only to OFDM RX operation. 1598 */ 1599 1600 void 1601 ar5212SetSpurMitigation(struct ath_hal *ah, 1602 const struct ieee80211_channel *chan) 1603 { 1604 uint32_t pilotMask[2] = {0, 0}, binMagMask[4] = {0, 0, 0 , 0}; 1605 uint16_t i, finalSpur, curChanAsSpur, binWidth = 0, spurDetectWidth, spurChan; 1606 int32_t spurDeltaPhase = 0, spurFreqSd = 0, spurOffset, binOffsetNumT16, curBinOffset; 1607 int16_t numBinOffsets; 1608 static const uint16_t magMapFor4[4] = {1, 2, 2, 1}; 1609 static const uint16_t magMapFor3[3] = {1, 2, 1}; 1610 const uint16_t *pMagMap; 1611 HAL_BOOL is2GHz = IEEE80211_IS_CHAN_2GHZ(chan); 1612 HAL_CHANNEL_INTERNAL *ichan = ath_hal_checkchannel(ah, chan); 1613 uint32_t val; 1614 1615 #define CHAN_TO_SPUR(_f, _freq) ( ((_freq) - ((_f) ? 2300 : 4900)) * 10 ) 1616 if (IS_2417(ah)) { 1617 HALDEBUG(ah, HAL_DEBUG_RFPARAM, "%s: no spur mitigation\n", 1618 __func__); 1619 return; 1620 } 1621 1622 curChanAsSpur = CHAN_TO_SPUR(is2GHz, ichan->channel); 1623 1624 if (ichan->mainSpur) { 1625 /* Pull out the saved spur value */ 1626 finalSpur = ichan->mainSpur; 1627 } else { 1628 /* 1629 * Check if spur immunity should be performed for this channel 1630 * Should only be performed once per channel and then saved 1631 */ 1632 finalSpur = AR_NO_SPUR; 1633 spurDetectWidth = HAL_SPUR_CHAN_WIDTH; 1634 if (IEEE80211_IS_CHAN_TURBO(chan)) 1635 spurDetectWidth *= 2; 1636 1637 /* Decide if any spur affects the current channel */ 1638 for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) { 1639 spurChan = ath_hal_getSpurChan(ah, i, is2GHz); 1640 if (spurChan == AR_NO_SPUR) { 1641 break; 1642 } 1643 if ((curChanAsSpur - spurDetectWidth <= (spurChan & HAL_SPUR_VAL_MASK)) && 1644 (curChanAsSpur + spurDetectWidth >= (spurChan & HAL_SPUR_VAL_MASK))) { 1645 finalSpur = spurChan & HAL_SPUR_VAL_MASK; 1646 break; 1647 } 1648 } 1649 /* Save detected spur (or no spur) for this channel */ 1650 ichan->mainSpur = finalSpur; 1651 } 1652 1653 /* Write spur immunity data */ 1654 if (finalSpur == AR_NO_SPUR) { 1655 /* Disable Spur Immunity Regs if they appear set */ 1656 if (OS_REG_READ(ah, AR_PHY_TIMING_CTRL4) & AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER) { 1657 /* Clear Spur Delta Phase, Spur Freq, and enable bits */ 1658 OS_REG_RMW_FIELD(ah, AR_PHY_MASK_CTL, AR_PHY_MASK_CTL_RATE, 0); 1659 val = OS_REG_READ(ah, AR_PHY_TIMING_CTRL4); 1660 val &= ~(AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER | 1661 AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK | 1662 AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK); 1663 OS_REG_WRITE(ah, AR_PHY_MASK_CTL, val); 1664 OS_REG_WRITE(ah, AR_PHY_TIMING11, 0); 1665 1666 /* Clear pilot masks */ 1667 OS_REG_WRITE(ah, AR_PHY_TIMING7, 0); 1668 OS_REG_RMW_FIELD(ah, AR_PHY_TIMING8, AR_PHY_TIMING8_PILOT_MASK_2, 0); 1669 OS_REG_WRITE(ah, AR_PHY_TIMING9, 0); 1670 OS_REG_RMW_FIELD(ah, AR_PHY_TIMING10, AR_PHY_TIMING10_PILOT_MASK_2, 0); 1671 1672 /* Clear magnitude masks */ 1673 OS_REG_WRITE(ah, AR_PHY_BIN_MASK_1, 0); 1674 OS_REG_WRITE(ah, AR_PHY_BIN_MASK_2, 0); 1675 OS_REG_WRITE(ah, AR_PHY_BIN_MASK_3, 0); 1676 OS_REG_RMW_FIELD(ah, AR_PHY_MASK_CTL, AR_PHY_MASK_CTL_MASK_4, 0); 1677 OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_1, 0); 1678 OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_2, 0); 1679 OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_3, 0); 1680 OS_REG_RMW_FIELD(ah, AR_PHY_BIN_MASK2_4, AR_PHY_BIN_MASK2_4_MASK_4, 0); 1681 } 1682 } else { 1683 spurOffset = finalSpur - curChanAsSpur; 1684 /* 1685 * Spur calculations: 1686 * spurDeltaPhase is (spurOffsetIn100KHz / chipFrequencyIn100KHz) << 21 1687 * spurFreqSd is (spurOffsetIn100KHz / sampleFrequencyIn100KHz) << 11 1688 */ 1689 if (IEEE80211_IS_CHAN_TURBO(chan)) { 1690 /* Chip Frequency & sampleFrequency are 80 MHz */ 1691 spurDeltaPhase = (spurOffset << 16) / 25; 1692 spurFreqSd = spurDeltaPhase >> 10; 1693 binWidth = HAL_BIN_WIDTH_TURBO_100HZ; 1694 } else if (IEEE80211_IS_CHAN_G(chan)) { 1695 /* Chip Frequency is 44MHz, sampleFrequency is 40 MHz */ 1696 spurFreqSd = (spurOffset << 8) / 55; 1697 spurDeltaPhase = (spurOffset << 17) / 25; 1698 binWidth = HAL_BIN_WIDTH_BASE_100HZ; 1699 } else { 1700 HALASSERT(!IEEE80211_IS_CHAN_B(chan)); 1701 /* Chip Frequency & sampleFrequency are 40 MHz */ 1702 spurDeltaPhase = (spurOffset << 17) / 25; 1703 spurFreqSd = spurDeltaPhase >> 10; 1704 binWidth = HAL_BIN_WIDTH_BASE_100HZ; 1705 } 1706 1707 /* Compute Pilot Mask */ 1708 binOffsetNumT16 = ((spurOffset * 1000) << 4) / binWidth; 1709 /* The spur is on a bin if it's remainder at times 16 is 0 */ 1710 if (binOffsetNumT16 & 0xF) { 1711 numBinOffsets = 4; 1712 pMagMap = magMapFor4; 1713 } else { 1714 numBinOffsets = 3; 1715 pMagMap = magMapFor3; 1716 } 1717 for (i = 0; i < numBinOffsets; i++) { 1718 if ((binOffsetNumT16 >> 4) > HAL_MAX_BINS_ALLOWED) { 1719 HALDEBUG(ah, HAL_DEBUG_ANY, 1720 "Too man bins in spur mitigation\n"); 1721 return; 1722 } 1723 1724 /* Get Pilot Mask values */ 1725 curBinOffset = (binOffsetNumT16 >> 4) + i + 25; 1726 if ((curBinOffset >= 0) && (curBinOffset <= 32)) { 1727 if (curBinOffset <= 25) 1728 pilotMask[0] |= 1 << curBinOffset; 1729 else if (curBinOffset >= 27) 1730 pilotMask[0] |= 1 << (curBinOffset - 1); 1731 } else if ((curBinOffset >= 33) && (curBinOffset <= 52)) 1732 pilotMask[1] |= 1 << (curBinOffset - 33); 1733 1734 /* Get viterbi values */ 1735 if ((curBinOffset >= -1) && (curBinOffset <= 14)) 1736 binMagMask[0] |= pMagMap[i] << (curBinOffset + 1) * 2; 1737 else if ((curBinOffset >= 15) && (curBinOffset <= 30)) 1738 binMagMask[1] |= pMagMap[i] << (curBinOffset - 15) * 2; 1739 else if ((curBinOffset >= 31) && (curBinOffset <= 46)) 1740 binMagMask[2] |= pMagMap[i] << (curBinOffset -31) * 2; 1741 else if((curBinOffset >= 47) && (curBinOffset <= 53)) 1742 binMagMask[3] |= pMagMap[i] << (curBinOffset -47) * 2; 1743 } 1744 1745 /* Write Spur Delta Phase, Spur Freq, and enable bits */ 1746 OS_REG_RMW_FIELD(ah, AR_PHY_MASK_CTL, AR_PHY_MASK_CTL_RATE, 0xFF); 1747 val = OS_REG_READ(ah, AR_PHY_TIMING_CTRL4); 1748 val |= (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER | 1749 AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK | 1750 AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK); 1751 OS_REG_WRITE(ah, AR_PHY_TIMING_CTRL4, val); 1752 OS_REG_WRITE(ah, AR_PHY_TIMING11, AR_PHY_TIMING11_USE_SPUR_IN_AGC | 1753 SM(spurFreqSd, AR_PHY_TIMING11_SPUR_FREQ_SD) | 1754 SM(spurDeltaPhase, AR_PHY_TIMING11_SPUR_DELTA_PHASE)); 1755 1756 /* Write pilot masks */ 1757 OS_REG_WRITE(ah, AR_PHY_TIMING7, pilotMask[0]); 1758 OS_REG_RMW_FIELD(ah, AR_PHY_TIMING8, AR_PHY_TIMING8_PILOT_MASK_2, pilotMask[1]); 1759 OS_REG_WRITE(ah, AR_PHY_TIMING9, pilotMask[0]); 1760 OS_REG_RMW_FIELD(ah, AR_PHY_TIMING10, AR_PHY_TIMING10_PILOT_MASK_2, pilotMask[1]); 1761 1762 /* Write magnitude masks */ 1763 OS_REG_WRITE(ah, AR_PHY_BIN_MASK_1, binMagMask[0]); 1764 OS_REG_WRITE(ah, AR_PHY_BIN_MASK_2, binMagMask[1]); 1765 OS_REG_WRITE(ah, AR_PHY_BIN_MASK_3, binMagMask[2]); 1766 OS_REG_RMW_FIELD(ah, AR_PHY_MASK_CTL, AR_PHY_MASK_CTL_MASK_4, binMagMask[3]); 1767 OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_1, binMagMask[0]); 1768 OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_2, binMagMask[1]); 1769 OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_3, binMagMask[2]); 1770 OS_REG_RMW_FIELD(ah, AR_PHY_BIN_MASK2_4, AR_PHY_BIN_MASK2_4_MASK_4, binMagMask[3]); 1771 } 1772 #undef CHAN_TO_SPUR 1773 } 1774 1775 1776 /* 1777 * Delta slope coefficient computation. 1778 * Required for OFDM operation. 1779 */ 1780 void 1781 ar5212SetDeltaSlope(struct ath_hal *ah, const struct ieee80211_channel *chan) 1782 { 1783 #define COEF_SCALE_S 24 1784 #define INIT_CLOCKMHZSCALED 0x64000000 1785 uint16_t freq = ath_hal_gethwchannel(ah, chan); 1786 unsigned long coef_scaled, coef_exp, coef_man, ds_coef_exp, ds_coef_man; 1787 unsigned long clockMhzScaled = INIT_CLOCKMHZSCALED; 1788 1789 if (IEEE80211_IS_CHAN_TURBO(chan)) 1790 clockMhzScaled *= 2; 1791 /* half and quarter rate can divide the scaled clock by 2 or 4 respectively */ 1792 /* scale for selected channel bandwidth */ 1793 if (IEEE80211_IS_CHAN_HALF(chan)) { 1794 clockMhzScaled = clockMhzScaled >> 1; 1795 } else if (IEEE80211_IS_CHAN_QUARTER(chan)) { 1796 clockMhzScaled = clockMhzScaled >> 2; 1797 } 1798 1799 /* 1800 * ALGO -> coef = 1e8/fcarrier*fclock/40; 1801 * scaled coef to provide precision for this floating calculation 1802 */ 1803 coef_scaled = clockMhzScaled / freq; 1804 1805 /* 1806 * ALGO -> coef_exp = 14-floor(log2(coef)); 1807 * floor(log2(x)) is the highest set bit position 1808 */ 1809 for (coef_exp = 31; coef_exp > 0; coef_exp--) 1810 if ((coef_scaled >> coef_exp) & 0x1) 1811 break; 1812 /* A coef_exp of 0 is a legal bit position but an unexpected coef_exp */ 1813 HALASSERT(coef_exp); 1814 coef_exp = 14 - (coef_exp - COEF_SCALE_S); 1815 1816 /* 1817 * ALGO -> coef_man = floor(coef* 2^coef_exp+0.5); 1818 * The coefficient is already shifted up for scaling 1819 */ 1820 coef_man = coef_scaled + (1 << (COEF_SCALE_S - coef_exp - 1)); 1821 ds_coef_man = coef_man >> (COEF_SCALE_S - coef_exp); 1822 ds_coef_exp = coef_exp - 16; 1823 1824 OS_REG_RMW_FIELD(ah, AR_PHY_TIMING3, 1825 AR_PHY_TIMING3_DSC_MAN, ds_coef_man); 1826 OS_REG_RMW_FIELD(ah, AR_PHY_TIMING3, 1827 AR_PHY_TIMING3_DSC_EXP, ds_coef_exp); 1828 #undef INIT_CLOCKMHZSCALED 1829 #undef COEF_SCALE_S 1830 } 1831 1832 /* 1833 * Set a limit on the overall output power. Used for dynamic 1834 * transmit power control and the like. 1835 * 1836 * NB: limit is in units of 0.5 dbM. 1837 */ 1838 HAL_BOOL 1839 ar5212SetTxPowerLimit(struct ath_hal *ah, uint32_t limit) 1840 { 1841 /* XXX blech, construct local writable copy */ 1842 struct ieee80211_channel dummy = *AH_PRIVATE(ah)->ah_curchan; 1843 uint16_t dummyXpdGains[2]; 1844 HAL_BOOL isBmode; 1845 1846 SAVE_CCK(ah, &dummy, isBmode); 1847 AH_PRIVATE(ah)->ah_powerLimit = AH_MIN(limit, MAX_RATE_POWER); 1848 return ar5212SetTransmitPower(ah, &dummy, dummyXpdGains); 1849 } 1850 1851 /* 1852 * Set the transmit power in the baseband for the given 1853 * operating channel and mode. 1854 */ 1855 HAL_BOOL 1856 ar5212SetTransmitPower(struct ath_hal *ah, 1857 const struct ieee80211_channel *chan, uint16_t *rfXpdGain) 1858 { 1859 #define POW_OFDM(_r, _s) (((0 & 1)<< ((_s)+6)) | (((_r) & 0x3f) << (_s))) 1860 #define POW_CCK(_r, _s) (((_r) & 0x3f) << (_s)) 1861 #define N(a) (sizeof (a) / sizeof (a[0])) 1862 static const uint16_t tpcScaleReductionTable[5] = 1863 { 0, 3, 6, 9, MAX_RATE_POWER }; 1864 struct ath_hal_5212 *ahp = AH5212(ah); 1865 uint16_t freq = ath_hal_gethwchannel(ah, chan); 1866 const HAL_EEPROM *ee = AH_PRIVATE(ah)->ah_eeprom; 1867 int16_t minPower, maxPower, tpcInDb, powerLimit; 1868 int i; 1869 1870 HALASSERT(ah->ah_magic == AR5212_MAGIC); 1871 1872 OS_MEMZERO(ahp->ah_pcdacTable, ahp->ah_pcdacTableSize); 1873 OS_MEMZERO(ahp->ah_ratesArray, sizeof(ahp->ah_ratesArray)); 1874 1875 powerLimit = AH_MIN(MAX_RATE_POWER, AH_PRIVATE(ah)->ah_powerLimit); 1876 if (powerLimit >= MAX_RATE_POWER || powerLimit == 0) 1877 tpcInDb = tpcScaleReductionTable[AH_PRIVATE(ah)->ah_tpScale]; 1878 else 1879 tpcInDb = 0; 1880 if (!ar5212SetRateTable(ah, chan, tpcInDb, powerLimit, 1881 AH_TRUE, &minPower, &maxPower)) { 1882 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: unable to set rate table\n", 1883 __func__); 1884 return AH_FALSE; 1885 } 1886 if (!ahp->ah_rfHal->setPowerTable(ah, 1887 &minPower, &maxPower, chan, rfXpdGain)) { 1888 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: unable to set power table\n", 1889 __func__); 1890 return AH_FALSE; 1891 } 1892 1893 /* 1894 * Adjust XR power/rate up by 2 dB to account for greater peak 1895 * to avg ratio - except in newer avg power designs 1896 */ 1897 if (!IS_2413(ah) && !IS_5413(ah)) 1898 ahp->ah_ratesArray[15] += 4; 1899 /* 1900 * txPowerIndexOffset is set by the SetPowerTable() call - 1901 * adjust the rate table 1902 */ 1903 for (i = 0; i < N(ahp->ah_ratesArray); i++) { 1904 ahp->ah_ratesArray[i] += ahp->ah_txPowerIndexOffset; 1905 if (ahp->ah_ratesArray[i] > 63) 1906 ahp->ah_ratesArray[i] = 63; 1907 } 1908 1909 if (ee->ee_eepMap < 2) { 1910 /* 1911 * Correct gain deltas for 5212 G operation - 1912 * Removed with revised chipset 1913 */ 1914 if (AH_PRIVATE(ah)->ah_phyRev < AR_PHY_CHIP_ID_REV_2 && 1915 IEEE80211_IS_CHAN_G(chan)) { 1916 uint16_t cckOfdmPwrDelta; 1917 1918 if (freq == 2484) 1919 cckOfdmPwrDelta = SCALE_OC_DELTA( 1920 ee->ee_cckOfdmPwrDelta - 1921 ee->ee_scaledCh14FilterCckDelta); 1922 else 1923 cckOfdmPwrDelta = SCALE_OC_DELTA( 1924 ee->ee_cckOfdmPwrDelta); 1925 ar5212CorrectGainDelta(ah, cckOfdmPwrDelta); 1926 } 1927 /* 1928 * Finally, write the power values into the 1929 * baseband power table 1930 */ 1931 for (i = 0; i < (PWR_TABLE_SIZE/2); i++) { 1932 OS_REG_WRITE(ah, AR_PHY_PCDAC_TX_POWER(i), 1933 ((((ahp->ah_pcdacTable[2*i + 1] << 8) | 0xff) & 0xffff) << 16) 1934 | (((ahp->ah_pcdacTable[2*i] << 8) | 0xff) & 0xffff) 1935 ); 1936 } 1937 } 1938 1939 /* Write the OFDM power per rate set */ 1940 OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE1, 1941 POW_OFDM(ahp->ah_ratesArray[3], 24) 1942 | POW_OFDM(ahp->ah_ratesArray[2], 16) 1943 | POW_OFDM(ahp->ah_ratesArray[1], 8) 1944 | POW_OFDM(ahp->ah_ratesArray[0], 0) 1945 ); 1946 OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE2, 1947 POW_OFDM(ahp->ah_ratesArray[7], 24) 1948 | POW_OFDM(ahp->ah_ratesArray[6], 16) 1949 | POW_OFDM(ahp->ah_ratesArray[5], 8) 1950 | POW_OFDM(ahp->ah_ratesArray[4], 0) 1951 ); 1952 1953 /* Write the CCK power per rate set */ 1954 OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE3, 1955 POW_CCK(ahp->ah_ratesArray[10], 24) 1956 | POW_CCK(ahp->ah_ratesArray[9], 16) 1957 | POW_CCK(ahp->ah_ratesArray[15], 8) /* XR target power */ 1958 | POW_CCK(ahp->ah_ratesArray[8], 0) 1959 ); 1960 OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE4, 1961 POW_CCK(ahp->ah_ratesArray[14], 24) 1962 | POW_CCK(ahp->ah_ratesArray[13], 16) 1963 | POW_CCK(ahp->ah_ratesArray[12], 8) 1964 | POW_CCK(ahp->ah_ratesArray[11], 0) 1965 ); 1966 1967 /* 1968 * Set max power to 30 dBm and, optionally, 1969 * enable TPC in tx descriptors. 1970 */ 1971 OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE_MAX, MAX_RATE_POWER | 1972 (ahp->ah_tpcEnabled ? AR_PHY_POWER_TX_RATE_MAX_TPC_ENABLE : 0)); 1973 1974 return AH_TRUE; 1975 #undef N 1976 #undef POW_CCK 1977 #undef POW_OFDM 1978 } 1979 1980 /* 1981 * Sets the transmit power in the baseband for the given 1982 * operating channel and mode. 1983 */ 1984 static HAL_BOOL 1985 ar5212SetRateTable(struct ath_hal *ah, const struct ieee80211_channel *chan, 1986 int16_t tpcScaleReduction, int16_t powerLimit, HAL_BOOL commit, 1987 int16_t *pMinPower, int16_t *pMaxPower) 1988 { 1989 struct ath_hal_5212 *ahp = AH5212(ah); 1990 uint16_t freq = ath_hal_gethwchannel(ah, chan); 1991 const HAL_EEPROM *ee = AH_PRIVATE(ah)->ah_eeprom; 1992 uint16_t *rpow = ahp->ah_ratesArray; 1993 uint16_t twiceMaxEdgePower = MAX_RATE_POWER; 1994 uint16_t twiceMaxEdgePowerCck = MAX_RATE_POWER; 1995 uint16_t twiceMaxRDPower = MAX_RATE_POWER; 1996 int i; 1997 uint8_t cfgCtl; 1998 int8_t twiceAntennaGain, twiceAntennaReduction; 1999 const RD_EDGES_POWER *rep; 2000 TRGT_POWER_INFO targetPowerOfdm, targetPowerCck; 2001 int16_t scaledPower, maxAvailPower = 0; 2002 int16_t r13, r9, r7, r0; 2003 2004 HALASSERT(ah->ah_magic == AR5212_MAGIC); 2005 2006 twiceMaxRDPower = chan->ic_maxregpower * 2; 2007 *pMaxPower = -MAX_RATE_POWER; 2008 *pMinPower = MAX_RATE_POWER; 2009 2010 /* Get conformance test limit maximum for this channel */ 2011 cfgCtl = ath_hal_getctl(ah, chan); 2012 for (i = 0; i < ee->ee_numCtls; i++) { 2013 uint16_t twiceMinEdgePower; 2014 2015 if (ee->ee_ctl[i] == 0) 2016 continue; 2017 if (ee->ee_ctl[i] == cfgCtl || 2018 cfgCtl == ((ee->ee_ctl[i] & CTL_MODE_M) | SD_NO_CTL)) { 2019 rep = &ee->ee_rdEdgesPower[i * NUM_EDGES]; 2020 twiceMinEdgePower = ar5212GetMaxEdgePower(freq, rep); 2021 if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL) { 2022 /* Find the minimum of all CTL edge powers that apply to this channel */ 2023 twiceMaxEdgePower = AH_MIN(twiceMaxEdgePower, twiceMinEdgePower); 2024 } else { 2025 twiceMaxEdgePower = twiceMinEdgePower; 2026 break; 2027 } 2028 } 2029 } 2030 2031 if (IEEE80211_IS_CHAN_G(chan)) { 2032 /* Check for a CCK CTL for 11G CCK powers */ 2033 cfgCtl = (cfgCtl & ~CTL_MODE_M) | CTL_11B; 2034 for (i = 0; i < ee->ee_numCtls; i++) { 2035 uint16_t twiceMinEdgePowerCck; 2036 2037 if (ee->ee_ctl[i] == 0) 2038 continue; 2039 if (ee->ee_ctl[i] == cfgCtl || 2040 cfgCtl == ((ee->ee_ctl[i] & CTL_MODE_M) | SD_NO_CTL)) { 2041 rep = &ee->ee_rdEdgesPower[i * NUM_EDGES]; 2042 twiceMinEdgePowerCck = ar5212GetMaxEdgePower(freq, rep); 2043 if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL) { 2044 /* Find the minimum of all CTL edge powers that apply to this channel */ 2045 twiceMaxEdgePowerCck = AH_MIN(twiceMaxEdgePowerCck, twiceMinEdgePowerCck); 2046 } else { 2047 twiceMaxEdgePowerCck = twiceMinEdgePowerCck; 2048 break; 2049 } 2050 } 2051 } 2052 } else { 2053 /* Set the 11B cck edge power to the one found before */ 2054 twiceMaxEdgePowerCck = twiceMaxEdgePower; 2055 } 2056 2057 /* Get Antenna Gain reduction */ 2058 if (IEEE80211_IS_CHAN_5GHZ(chan)) { 2059 ath_hal_eepromGet(ah, AR_EEP_ANTGAINMAX_5, &twiceAntennaGain); 2060 } else { 2061 ath_hal_eepromGet(ah, AR_EEP_ANTGAINMAX_2, &twiceAntennaGain); 2062 } 2063 twiceAntennaReduction = 2064 ath_hal_getantennareduction(ah, chan, twiceAntennaGain); 2065 2066 if (IEEE80211_IS_CHAN_OFDM(chan)) { 2067 /* Get final OFDM target powers */ 2068 if (IEEE80211_IS_CHAN_2GHZ(chan)) { 2069 ar5212GetTargetPowers(ah, chan, ee->ee_trgtPwr_11g, 2070 ee->ee_numTargetPwr_11g, &targetPowerOfdm); 2071 } else { 2072 ar5212GetTargetPowers(ah, chan, ee->ee_trgtPwr_11a, 2073 ee->ee_numTargetPwr_11a, &targetPowerOfdm); 2074 } 2075 2076 /* Get Maximum OFDM power */ 2077 /* Minimum of target and edge powers */ 2078 scaledPower = AH_MIN(twiceMaxEdgePower, 2079 twiceMaxRDPower - twiceAntennaReduction); 2080 2081 /* 2082 * If turbo is set, reduce power to keep power 2083 * consumption under 2 Watts. Note that we always do 2084 * this unless specially configured. Then we limit 2085 * power only for non-AP operation. 2086 */ 2087 if (IEEE80211_IS_CHAN_TURBO(chan) 2088 #ifdef AH_ENABLE_AP_SUPPORT 2089 && AH_PRIVATE(ah)->ah_opmode != HAL_M_HOSTAP 2090 #endif 2091 ) { 2092 /* 2093 * If turbo is set, reduce power to keep power 2094 * consumption under 2 Watts 2095 */ 2096 if (ee->ee_version >= AR_EEPROM_VER3_1) 2097 scaledPower = AH_MIN(scaledPower, 2098 ee->ee_turbo2WMaxPower5); 2099 /* 2100 * EEPROM version 4.0 added an additional 2101 * constraint on 2.4GHz channels. 2102 */ 2103 if (ee->ee_version >= AR_EEPROM_VER4_0 && 2104 IEEE80211_IS_CHAN_2GHZ(chan)) 2105 scaledPower = AH_MIN(scaledPower, 2106 ee->ee_turbo2WMaxPower2); 2107 } 2108 2109 maxAvailPower = AH_MIN(scaledPower, 2110 targetPowerOfdm.twicePwr6_24); 2111 2112 /* Reduce power by max regulatory domain allowed restrictions */ 2113 scaledPower = maxAvailPower - (tpcScaleReduction * 2); 2114 scaledPower = (scaledPower < 0) ? 0 : scaledPower; 2115 scaledPower = AH_MIN(scaledPower, powerLimit); 2116 2117 if (commit) { 2118 /* Set OFDM rates 9, 12, 18, 24 */ 2119 r0 = rpow[0] = rpow[1] = rpow[2] = rpow[3] = rpow[4] = scaledPower; 2120 2121 /* Set OFDM rates 36, 48, 54, XR */ 2122 rpow[5] = AH_MIN(rpow[0], targetPowerOfdm.twicePwr36); 2123 rpow[6] = AH_MIN(rpow[0], targetPowerOfdm.twicePwr48); 2124 r7 = rpow[7] = AH_MIN(rpow[0], targetPowerOfdm.twicePwr54); 2125 2126 if (ee->ee_version >= AR_EEPROM_VER4_0) { 2127 /* Setup XR target power from EEPROM */ 2128 rpow[15] = AH_MIN(scaledPower, IEEE80211_IS_CHAN_2GHZ(chan) ? 2129 ee->ee_xrTargetPower2 : ee->ee_xrTargetPower5); 2130 } else { 2131 /* XR uses 6mb power */ 2132 rpow[15] = rpow[0]; 2133 } 2134 ahp->ah_ofdmTxPower = *pMaxPower; 2135 2136 } else { 2137 r0 = scaledPower; 2138 r7 = AH_MIN(r0, targetPowerOfdm.twicePwr54); 2139 } 2140 *pMinPower = r7; 2141 *pMaxPower = r0; 2142 2143 HALDEBUG(ah, HAL_DEBUG_RFPARAM, 2144 "%s: MaxRD: %d TurboMax: %d MaxCTL: %d " 2145 "TPC_Reduction %d chan=%d (0x%x) maxAvailPower=%d pwr6_24=%d, maxPower=%d\n", 2146 __func__, twiceMaxRDPower, ee->ee_turbo2WMaxPower5, 2147 twiceMaxEdgePower, tpcScaleReduction * 2, 2148 chan->ic_freq, chan->ic_flags, 2149 maxAvailPower, targetPowerOfdm.twicePwr6_24, *pMaxPower); 2150 } 2151 2152 if (IEEE80211_IS_CHAN_CCK(chan)) { 2153 /* Get final CCK target powers */ 2154 ar5212GetTargetPowers(ah, chan, ee->ee_trgtPwr_11b, 2155 ee->ee_numTargetPwr_11b, &targetPowerCck); 2156 2157 /* Reduce power by max regulatory domain allowed restrictions */ 2158 scaledPower = AH_MIN(twiceMaxEdgePowerCck, 2159 twiceMaxRDPower - twiceAntennaReduction); 2160 if (maxAvailPower < AH_MIN(scaledPower, targetPowerCck.twicePwr6_24)) 2161 maxAvailPower = AH_MIN(scaledPower, targetPowerCck.twicePwr6_24); 2162 2163 /* Reduce power by user selection */ 2164 scaledPower = AH_MIN(scaledPower, targetPowerCck.twicePwr6_24) - (tpcScaleReduction * 2); 2165 scaledPower = (scaledPower < 0) ? 0 : scaledPower; 2166 scaledPower = AH_MIN(scaledPower, powerLimit); 2167 2168 if (commit) { 2169 /* Set CCK rates 2L, 2S, 5.5L, 5.5S, 11L, 11S */ 2170 rpow[8] = AH_MIN(scaledPower, targetPowerCck.twicePwr6_24); 2171 r9 = rpow[9] = AH_MIN(scaledPower, targetPowerCck.twicePwr36); 2172 rpow[10] = rpow[9]; 2173 rpow[11] = AH_MIN(scaledPower, targetPowerCck.twicePwr48); 2174 rpow[12] = rpow[11]; 2175 r13 = rpow[13] = AH_MIN(scaledPower, targetPowerCck.twicePwr54); 2176 rpow[14] = rpow[13]; 2177 } else { 2178 r9 = AH_MIN(scaledPower, targetPowerCck.twicePwr36); 2179 r13 = AH_MIN(scaledPower, targetPowerCck.twicePwr54); 2180 } 2181 2182 /* Set min/max power based off OFDM values or initialization */ 2183 if (r13 < *pMinPower) 2184 *pMinPower = r13; 2185 if (r9 > *pMaxPower) 2186 *pMaxPower = r9; 2187 2188 HALDEBUG(ah, HAL_DEBUG_RFPARAM, 2189 "%s: cck: MaxRD: %d MaxCTL: %d " 2190 "TPC_Reduction %d chan=%d (0x%x) maxAvailPower=%d pwr6_24=%d, maxPower=%d\n", 2191 __func__, twiceMaxRDPower, twiceMaxEdgePowerCck, 2192 tpcScaleReduction * 2, chan->ic_freq, chan->ic_flags, 2193 maxAvailPower, targetPowerCck.twicePwr6_24, *pMaxPower); 2194 } 2195 if (commit) { 2196 ahp->ah_tx6PowerInHalfDbm = *pMaxPower; 2197 AH_PRIVATE(ah)->ah_maxPowerLevel = ahp->ah_tx6PowerInHalfDbm; 2198 } 2199 return AH_TRUE; 2200 } 2201 2202 HAL_BOOL 2203 ar5212GetChipPowerLimits(struct ath_hal *ah, struct ieee80211_channel *chan) 2204 { 2205 struct ath_hal_5212 *ahp = AH5212(ah); 2206 #if 0 2207 static const uint16_t tpcScaleReductionTable[5] = 2208 { 0, 3, 6, 9, MAX_RATE_POWER }; 2209 int16_t tpcInDb, powerLimit; 2210 #endif 2211 int16_t minPower, maxPower; 2212 2213 /* 2214 * Get Pier table max and min powers. 2215 */ 2216 if (ahp->ah_rfHal->getChannelMaxMinPower(ah, chan, &maxPower, &minPower)) { 2217 /* NB: rf code returns 1/4 dBm units, convert */ 2218 chan->ic_maxpower = maxPower / 2; 2219 chan->ic_minpower = minPower / 2; 2220 } else { 2221 HALDEBUG(ah, HAL_DEBUG_ANY, 2222 "%s: no min/max power for %u/0x%x\n", 2223 __func__, chan->ic_freq, chan->ic_flags); 2224 chan->ic_maxpower = MAX_RATE_POWER; 2225 chan->ic_minpower = 0; 2226 } 2227 #if 0 2228 /* 2229 * Now adjust to reflect any global scale and/or CTL's. 2230 * (XXX is that correct?) 2231 */ 2232 powerLimit = AH_MIN(MAX_RATE_POWER, AH_PRIVATE(ah)->ah_powerLimit); 2233 if (powerLimit >= MAX_RATE_POWER || powerLimit == 0) 2234 tpcInDb = tpcScaleReductionTable[AH_PRIVATE(ah)->ah_tpScale]; 2235 else 2236 tpcInDb = 0; 2237 if (!ar5212SetRateTable(ah, chan, tpcInDb, powerLimit, 2238 AH_FALSE, &minPower, &maxPower)) { 2239 HALDEBUG(ah, HAL_DEBUG_ANY, 2240 "%s: unable to find max/min power\n",__func__); 2241 return AH_FALSE; 2242 } 2243 if (maxPower < chan->ic_maxpower) 2244 chan->ic_maxpower = maxPower; 2245 if (minPower < chan->ic_minpower) 2246 chan->ic_minpower = minPower; 2247 HALDEBUG(ah, HAL_DEBUG_RESET, 2248 "Chan %d: MaxPow = %d MinPow = %d\n", 2249 chan->ic_freq, chan->ic_maxpower, chans->ic_minpower); 2250 #endif 2251 return AH_TRUE; 2252 } 2253 2254 /* 2255 * Correct for the gain-delta between ofdm and cck mode target 2256 * powers. Write the results to the rate table and the power table. 2257 * 2258 * Conventions : 2259 * 1. rpow[ii] is the integer value of 2*(desired power 2260 * for the rate ii in dBm) to provide 0.5dB resolution. rate 2261 * mapping is as following : 2262 * [0..7] --> ofdm 6, 9, .. 48, 54 2263 * [8..14] --> cck 1L, 2L, 2S, .. 11L, 11S 2264 * [15] --> XR (all rates get the same power) 2265 * 2. powv[ii] is the pcdac corresponding to ii/2 dBm. 2266 */ 2267 static void 2268 ar5212CorrectGainDelta(struct ath_hal *ah, int twiceOfdmCckDelta) 2269 { 2270 #define N(_a) (sizeof(_a) / sizeof(_a[0])) 2271 struct ath_hal_5212 *ahp = AH5212(ah); 2272 const HAL_EEPROM *ee = AH_PRIVATE(ah)->ah_eeprom; 2273 int16_t ratesIndex[N(ahp->ah_ratesArray)]; 2274 uint16_t ii, jj, iter; 2275 int32_t cckIndex; 2276 int16_t gainDeltaAdjust; 2277 2278 HALASSERT(ah->ah_magic == AR5212_MAGIC); 2279 2280 gainDeltaAdjust = ee->ee_cckOfdmGainDelta; 2281 2282 /* make a local copy of desired powers as initial indices */ 2283 OS_MEMCPY(ratesIndex, ahp->ah_ratesArray, sizeof(ratesIndex)); 2284 2285 /* fix only the CCK indices */ 2286 for (ii = 8; ii < 15; ii++) { 2287 /* apply a gain_delta correction of -15 for CCK */ 2288 ratesIndex[ii] -= gainDeltaAdjust; 2289 2290 /* Now check for contention with all ofdm target powers */ 2291 jj = 0; 2292 iter = 0; 2293 /* indicates not all ofdm rates checked forcontention yet */ 2294 while (jj < 16) { 2295 if (ratesIndex[ii] < 0) 2296 ratesIndex[ii] = 0; 2297 if (jj == 8) { /* skip CCK rates */ 2298 jj = 15; 2299 continue; 2300 } 2301 if (ratesIndex[ii] == ahp->ah_ratesArray[jj]) { 2302 if (ahp->ah_ratesArray[jj] == 0) 2303 ratesIndex[ii]++; 2304 else if (iter > 50) { 2305 /* 2306 * To avoid pathological case of of 2307 * dm target powers 0 and 0.5dBm 2308 */ 2309 ratesIndex[ii]++; 2310 } else 2311 ratesIndex[ii]--; 2312 /* check with all rates again */ 2313 jj = 0; 2314 iter++; 2315 } else 2316 jj++; 2317 } 2318 if (ratesIndex[ii] >= PWR_TABLE_SIZE) 2319 ratesIndex[ii] = PWR_TABLE_SIZE -1; 2320 cckIndex = ahp->ah_ratesArray[ii] - twiceOfdmCckDelta; 2321 if (cckIndex < 0) 2322 cckIndex = 0; 2323 2324 /* 2325 * Validate that the indexes for the powv are not 2326 * out of bounds. 2327 */ 2328 HALASSERT(cckIndex < PWR_TABLE_SIZE); 2329 HALASSERT(ratesIndex[ii] < PWR_TABLE_SIZE); 2330 ahp->ah_pcdacTable[ratesIndex[ii]] = 2331 ahp->ah_pcdacTable[cckIndex]; 2332 } 2333 /* Override rate per power table with new values */ 2334 for (ii = 8; ii < 15; ii++) 2335 ahp->ah_ratesArray[ii] = ratesIndex[ii]; 2336 #undef N 2337 } 2338 2339 /* 2340 * Find the maximum conformance test limit for the given channel and CTL info 2341 */ 2342 static uint16_t 2343 ar5212GetMaxEdgePower(uint16_t channel, const RD_EDGES_POWER *pRdEdgesPower) 2344 { 2345 /* temp array for holding edge channels */ 2346 uint16_t tempChannelList[NUM_EDGES]; 2347 uint16_t clo, chi, twiceMaxEdgePower; 2348 int i, numEdges; 2349 2350 /* Get the edge power */ 2351 for (i = 0; i < NUM_EDGES; i++) { 2352 if (pRdEdgesPower[i].rdEdge == 0) 2353 break; 2354 tempChannelList[i] = pRdEdgesPower[i].rdEdge; 2355 } 2356 numEdges = i; 2357 2358 ar5212GetLowerUpperValues(channel, tempChannelList, 2359 numEdges, &clo, &chi); 2360 /* Get the index for the lower channel */ 2361 for (i = 0; i < numEdges && clo != tempChannelList[i]; i++) 2362 ; 2363 /* Is lower channel ever outside the rdEdge? */ 2364 HALASSERT(i != numEdges); 2365 2366 if ((clo == chi && clo == channel) || (pRdEdgesPower[i].flag)) { 2367 /* 2368 * If there's an exact channel match or an inband flag set 2369 * on the lower channel use the given rdEdgePower 2370 */ 2371 twiceMaxEdgePower = pRdEdgesPower[i].twice_rdEdgePower; 2372 HALASSERT(twiceMaxEdgePower > 0); 2373 } else 2374 twiceMaxEdgePower = MAX_RATE_POWER; 2375 return twiceMaxEdgePower; 2376 } 2377 2378 /* 2379 * Returns interpolated or the scaled up interpolated value 2380 */ 2381 static uint16_t 2382 interpolate(uint16_t target, uint16_t srcLeft, uint16_t srcRight, 2383 uint16_t targetLeft, uint16_t targetRight) 2384 { 2385 uint16_t rv; 2386 int16_t lRatio; 2387 2388 /* to get an accurate ratio, always scale, if want to scale, then don't scale back down */ 2389 if ((targetLeft * targetRight) == 0) 2390 return 0; 2391 2392 if (srcRight != srcLeft) { 2393 /* 2394 * Note the ratio always need to be scaled, 2395 * since it will be a fraction. 2396 */ 2397 lRatio = (target - srcLeft) * EEP_SCALE / (srcRight - srcLeft); 2398 if (lRatio < 0) { 2399 /* Return as Left target if value would be negative */ 2400 rv = targetLeft; 2401 } else if (lRatio > EEP_SCALE) { 2402 /* Return as Right target if Ratio is greater than 100% (SCALE) */ 2403 rv = targetRight; 2404 } else { 2405 rv = (lRatio * targetRight + (EEP_SCALE - lRatio) * 2406 targetLeft) / EEP_SCALE; 2407 } 2408 } else { 2409 rv = targetLeft; 2410 } 2411 return rv; 2412 } 2413 2414 /* 2415 * Return the four rates of target power for the given target power table 2416 * channel, and number of channels 2417 */ 2418 static void 2419 ar5212GetTargetPowers(struct ath_hal *ah, const struct ieee80211_channel *chan, 2420 const TRGT_POWER_INFO *powInfo, 2421 uint16_t numChannels, TRGT_POWER_INFO *pNewPower) 2422 { 2423 uint16_t freq = ath_hal_gethwchannel(ah, chan); 2424 /* temp array for holding target power channels */ 2425 uint16_t tempChannelList[NUM_TEST_FREQUENCIES]; 2426 uint16_t clo, chi, ixlo, ixhi; 2427 int i; 2428 2429 /* Copy the target powers into the temp channel list */ 2430 for (i = 0; i < numChannels; i++) 2431 tempChannelList[i] = powInfo[i].testChannel; 2432 2433 ar5212GetLowerUpperValues(freq, tempChannelList, 2434 numChannels, &clo, &chi); 2435 2436 /* Get the indices for the channel */ 2437 ixlo = ixhi = 0; 2438 for (i = 0; i < numChannels; i++) { 2439 if (clo == tempChannelList[i]) { 2440 ixlo = i; 2441 } 2442 if (chi == tempChannelList[i]) { 2443 ixhi = i; 2444 break; 2445 } 2446 } 2447 2448 /* 2449 * Get the lower and upper channels, target powers, 2450 * and interpolate between them. 2451 */ 2452 pNewPower->twicePwr6_24 = interpolate(freq, clo, chi, 2453 powInfo[ixlo].twicePwr6_24, powInfo[ixhi].twicePwr6_24); 2454 pNewPower->twicePwr36 = interpolate(freq, clo, chi, 2455 powInfo[ixlo].twicePwr36, powInfo[ixhi].twicePwr36); 2456 pNewPower->twicePwr48 = interpolate(freq, clo, chi, 2457 powInfo[ixlo].twicePwr48, powInfo[ixhi].twicePwr48); 2458 pNewPower->twicePwr54 = interpolate(freq, clo, chi, 2459 powInfo[ixlo].twicePwr54, powInfo[ixhi].twicePwr54); 2460 } 2461 2462 /* 2463 * Search a list for a specified value v that is within 2464 * EEP_DELTA of the search values. Return the closest 2465 * values in the list above and below the desired value. 2466 * EEP_DELTA is a factional value; everything is scaled 2467 * so only integer arithmetic is used. 2468 * 2469 * NB: the input list is assumed to be sorted in ascending order 2470 */ 2471 void 2472 ar5212GetLowerUpperValues(uint16_t v, uint16_t *lp, uint16_t listSize, 2473 uint16_t *vlo, uint16_t *vhi) 2474 { 2475 uint32_t target = v * EEP_SCALE; 2476 uint16_t *ep = lp+listSize; 2477 2478 /* 2479 * Check first and last elements for out-of-bounds conditions. 2480 */ 2481 if (target < (uint32_t)(lp[0] * EEP_SCALE - EEP_DELTA)) { 2482 *vlo = *vhi = lp[0]; 2483 return; 2484 } 2485 if (target > (uint32_t)(ep[-1] * EEP_SCALE + EEP_DELTA)) { 2486 *vlo = *vhi = ep[-1]; 2487 return; 2488 } 2489 2490 /* look for value being near or between 2 values in list */ 2491 for (; lp < ep; lp++) { 2492 /* 2493 * If value is close to the current value of the list 2494 * then target is not between values, it is one of the values 2495 */ 2496 if (abs(lp[0] * EEP_SCALE - target) < EEP_DELTA) { 2497 *vlo = *vhi = lp[0]; 2498 return; 2499 } 2500 /* 2501 * Look for value being between current value and next value 2502 * if so return these 2 values 2503 */ 2504 if (target < (uint32_t)(lp[1] * EEP_SCALE - EEP_DELTA)) { 2505 *vlo = lp[0]; 2506 *vhi = lp[1]; 2507 return; 2508 } 2509 } 2510 HALASSERT(AH_FALSE); /* should not reach here */ 2511 } 2512 2513 /* 2514 * Perform analog "swizzling" of parameters into their location 2515 * 2516 * NB: used by RF backends 2517 */ 2518 void 2519 ar5212ModifyRfBuffer(uint32_t *rfBuf, uint32_t reg32, uint32_t numBits, 2520 uint32_t firstBit, uint32_t column) 2521 { 2522 #define MAX_ANALOG_START 319 /* XXX */ 2523 uint32_t tmp32, mask, arrayEntry, lastBit; 2524 int32_t bitPosition, bitsLeft; 2525 2526 HALASSERT(column <= 3); 2527 HALASSERT(numBits <= 32); 2528 HALASSERT(firstBit + numBits <= MAX_ANALOG_START); 2529 2530 tmp32 = ath_hal_reverseBits(reg32, numBits); 2531 arrayEntry = (firstBit - 1) / 8; 2532 bitPosition = (firstBit - 1) % 8; 2533 bitsLeft = numBits; 2534 while (bitsLeft > 0) { 2535 lastBit = (bitPosition + bitsLeft > 8) ? 2536 8 : bitPosition + bitsLeft; 2537 mask = (((1 << lastBit) - 1) ^ ((1 << bitPosition) - 1)) << 2538 (column * 8); 2539 rfBuf[arrayEntry] &= ~mask; 2540 rfBuf[arrayEntry] |= ((tmp32 << bitPosition) << 2541 (column * 8)) & mask; 2542 bitsLeft -= 8 - bitPosition; 2543 tmp32 = tmp32 >> (8 - bitPosition); 2544 bitPosition = 0; 2545 arrayEntry++; 2546 } 2547 #undef MAX_ANALOG_START 2548 } 2549 2550 /* 2551 * Sets the rate to duration values in MAC - used for multi- 2552 * rate retry. 2553 * The rate duration table needs to cover all valid rate codes; 2554 * the 11g table covers all ofdm rates, while the 11b table 2555 * covers all cck rates => all valid rates get covered between 2556 * these two mode's ratetables! 2557 * But if we're turbo, the ofdm phy is replaced by the turbo phy 2558 * and cck is not valid with turbo => all rates get covered 2559 * by the turbo ratetable only 2560 */ 2561 void 2562 ar5212SetRateDurationTable(struct ath_hal *ah, 2563 const struct ieee80211_channel *chan) 2564 { 2565 const HAL_RATE_TABLE *rt; 2566 int i; 2567 2568 /* NB: band doesn't matter for 1/2 and 1/4 rate */ 2569 if (IEEE80211_IS_CHAN_HALF(chan)) { 2570 rt = ar5212GetRateTable(ah, HAL_MODE_11A_HALF_RATE); 2571 } else if (IEEE80211_IS_CHAN_QUARTER(chan)) { 2572 rt = ar5212GetRateTable(ah, HAL_MODE_11A_QUARTER_RATE); 2573 } else { 2574 rt = ar5212GetRateTable(ah, 2575 IEEE80211_IS_CHAN_TURBO(chan) ? HAL_MODE_TURBO : HAL_MODE_11G); 2576 } 2577 2578 for (i = 0; i < rt->rateCount; ++i) 2579 OS_REG_WRITE(ah, 2580 AR_RATE_DURATION(rt->info[i].rateCode), 2581 ath_hal_computetxtime(ah, rt, 2582 WLAN_CTRL_FRAME_SIZE, 2583 rt->info[i].controlRate, AH_FALSE)); 2584 if (!IEEE80211_IS_CHAN_TURBO(chan)) { 2585 /* 11g Table is used to cover the CCK rates. */ 2586 rt = ar5212GetRateTable(ah, HAL_MODE_11G); 2587 for (i = 0; i < rt->rateCount; ++i) { 2588 uint32_t reg = AR_RATE_DURATION(rt->info[i].rateCode); 2589 2590 if (rt->info[i].phy != IEEE80211_T_CCK) 2591 continue; 2592 2593 OS_REG_WRITE(ah, reg, 2594 ath_hal_computetxtime(ah, rt, 2595 WLAN_CTRL_FRAME_SIZE, 2596 rt->info[i].controlRate, AH_FALSE)); 2597 /* cck rates have short preamble option also */ 2598 if (rt->info[i].shortPreamble) { 2599 reg += rt->info[i].shortPreamble << 2; 2600 OS_REG_WRITE(ah, reg, 2601 ath_hal_computetxtime(ah, rt, 2602 WLAN_CTRL_FRAME_SIZE, 2603 rt->info[i].controlRate, 2604 AH_TRUE)); 2605 } 2606 } 2607 } 2608 } 2609 2610 /* Adjust various register settings based on half/quarter rate clock setting. 2611 * This includes: +USEC, TX/RX latency, 2612 * + IFS params: slot, eifs, misc etc. 2613 */ 2614 void 2615 ar5212SetIFSTiming(struct ath_hal *ah, const struct ieee80211_channel *chan) 2616 { 2617 uint32_t txLat, rxLat, usec, slot, refClock, eifs, init_usec; 2618 2619 HALASSERT(IEEE80211_IS_CHAN_HALF(chan) || 2620 IEEE80211_IS_CHAN_QUARTER(chan)); 2621 2622 refClock = OS_REG_READ(ah, AR_USEC) & AR_USEC_USEC32; 2623 if (IEEE80211_IS_CHAN_HALF(chan)) { 2624 slot = IFS_SLOT_HALF_RATE; 2625 rxLat = RX_NON_FULL_RATE_LATENCY << AR5212_USEC_RX_LAT_S; 2626 txLat = TX_HALF_RATE_LATENCY << AR5212_USEC_TX_LAT_S; 2627 usec = HALF_RATE_USEC; 2628 eifs = IFS_EIFS_HALF_RATE; 2629 init_usec = INIT_USEC >> 1; 2630 } else { /* quarter rate */ 2631 slot = IFS_SLOT_QUARTER_RATE; 2632 rxLat = RX_NON_FULL_RATE_LATENCY << AR5212_USEC_RX_LAT_S; 2633 txLat = TX_QUARTER_RATE_LATENCY << AR5212_USEC_TX_LAT_S; 2634 usec = QUARTER_RATE_USEC; 2635 eifs = IFS_EIFS_QUARTER_RATE; 2636 init_usec = INIT_USEC >> 2; 2637 } 2638 2639 OS_REG_WRITE(ah, AR_USEC, (usec | refClock | txLat | rxLat)); 2640 OS_REG_WRITE(ah, AR_D_GBL_IFS_SLOT, slot); 2641 OS_REG_WRITE(ah, AR_D_GBL_IFS_EIFS, eifs); 2642 OS_REG_RMW_FIELD(ah, AR_D_GBL_IFS_MISC, 2643 AR_D_GBL_IFS_MISC_USEC_DURATION, init_usec); 2644 } 2645