xref: /freebsd/sys/dev/gpio/gpiopps.c (revision e0c4386e)
1 /*-
2  * Copyright (c) 2016 Ian Lepore <ian@FreeBSD.org>
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1.	Redistributions of source code must retain the above copyright
9  *	notice, this list of conditions and the following disclaimer.
10  * 2.	Redistributions in binary form must reproduce the above copyright
11  *	notice, this list of conditions and the following disclaimer in the
12  *	documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  */
26 
27 #include <sys/param.h>
28 #include <sys/gpio.h>
29 #include <sys/kernel.h>
30 #include <sys/lock.h>
31 #include <sys/module.h>
32 #include <sys/bus.h>
33 #include <sys/conf.h>
34 #include <sys/timepps.h>
35 
36 #include <dev/gpio/gpiobusvar.h>
37 
38 #include "opt_platform.h"
39 
40 #ifdef FDT
41 #include <dev/ofw/ofw_bus.h>
42 
43 static struct ofw_compat_data compat_data[] = {
44 	{"pps-gpio", 	1},
45 	{NULL,          0}
46 };
47 SIMPLEBUS_PNP_INFO(compat_data);
48 #endif /* FDT */
49 
50 struct pps_softc {
51 	device_t         dev;
52 	gpio_pin_t	 gpin;
53 	void            *ihandler;
54 	struct resource *ires;
55 	int		 irid;
56 	struct cdev     *pps_cdev;
57 	struct pps_state pps_state;
58 	struct mtx       pps_mtx;
59 	bool		 falling_edge;
60 };
61 
62 #define PPS_CDEV_NAME   "gpiopps"
63 
64 static int
65 gpiopps_open(struct cdev *dev, int flags, int fmt, struct thread *td)
66 {
67 	struct pps_softc *sc = dev->si_drv1;
68 
69 	/* We can't be unloaded while open, so mark ourselves BUSY. */
70 	mtx_lock(&sc->pps_mtx);
71 	device_busy(sc->dev);
72 	mtx_unlock(&sc->pps_mtx);
73 
74 	return 0;
75 }
76 
77 static	int
78 gpiopps_close(struct cdev *dev, int flags, int fmt, struct thread *td)
79 {
80 	struct pps_softc *sc = dev->si_drv1;
81 
82 	mtx_lock(&sc->pps_mtx);
83 	device_unbusy(sc->dev);
84 	mtx_unlock(&sc->pps_mtx);
85 
86 	return 0;
87 }
88 
89 static int
90 gpiopps_ioctl(struct cdev *dev, u_long cmd, caddr_t data, int flags, struct thread *td)
91 {
92 	struct pps_softc *sc = dev->si_drv1;
93 	int err;
94 
95 	/* Let the kernel do the heavy lifting for ioctl. */
96 	mtx_lock(&sc->pps_mtx);
97 	err = pps_ioctl(cmd, data, &sc->pps_state);
98 	mtx_unlock(&sc->pps_mtx);
99 
100 	return err;
101 }
102 
103 static struct cdevsw pps_cdevsw = {
104 	.d_version =    D_VERSION,
105 	.d_flags =	D_TRACKCLOSE,
106 	.d_open =       gpiopps_open,
107 	.d_close =      gpiopps_close,
108 	.d_ioctl =      gpiopps_ioctl,
109 	.d_name =       PPS_CDEV_NAME,
110 };
111 
112 static int
113 gpiopps_ifltr(void *arg)
114 {
115 	struct pps_softc *sc = arg;
116 
117 	/*
118 	 * There is no locking here by design... The kernel cleverly captures
119 	 * the current time into an area of the pps_state structure which is
120 	 * written only by the pps_capture() routine and read only by the
121 	 * pps_event() routine.  We don't need lock-based management of access
122 	 * to the capture area because we have time-based access management:  we
123 	 * can't be reading and writing concurrently because we can't be running
124 	 * both the threaded and filter handlers concurrently (because a new
125 	 * hardware interrupt can't happen until the threaded handler for the
126 	 * current interrupt exits, after which the system does the EOI that
127 	 * enables a new hardware interrupt).
128 	 */
129 	pps_capture(&sc->pps_state);
130 	return (FILTER_SCHEDULE_THREAD);
131 }
132 
133 static void
134 gpiopps_ithrd(void *arg)
135 {
136 	struct pps_softc *sc = arg;
137 
138 	/*
139 	 * Go create a pps event from the data captured in the filter handler.
140 	 *
141 	 * Note that we DO need locking here, unlike the case with the filter
142 	 * handler.  The pps_event() routine updates the non-capture part of the
143 	 * pps_state structure, and the ioctl() code could be accessing that
144 	 * data right now in a non-interrupt context, so we need an interlock.
145 	 */
146 	mtx_lock(&sc->pps_mtx);
147 	pps_event(&sc->pps_state, PPS_CAPTUREASSERT);
148 	mtx_unlock(&sc->pps_mtx);
149 }
150 
151 static int
152 gpiopps_detach(device_t dev)
153 {
154 	struct pps_softc *sc = device_get_softc(dev);
155 
156 	if (sc->pps_cdev != NULL)
157 		destroy_dev(sc->pps_cdev);
158 	if (sc->ihandler != NULL)
159 		bus_teardown_intr(dev, sc->ires, sc->ihandler);
160 	if (sc->ires != NULL)
161 		bus_release_resource(dev, SYS_RES_IRQ, sc->irid, sc->ires);
162 	if (sc->gpin != NULL)
163 		gpiobus_release_pin(GPIO_GET_BUS(sc->gpin->dev), sc->gpin->pin);
164 	return (0);
165 }
166 
167 #ifdef FDT
168 static int
169 gpiopps_fdt_attach(device_t dev)
170 {
171 	struct pps_softc *sc;
172 	struct make_dev_args devargs;
173 	phandle_t node;
174 	uint32_t edge, pincaps;
175 	int err;
176 
177 	sc = device_get_softc(dev);
178 	sc->dev = dev;
179 
180 	mtx_init(&sc->pps_mtx, device_get_nameunit(dev), NULL, MTX_DEF);
181 
182 	/* Initialize the pps_state struct. */
183 	sc->pps_state.ppscap = PPS_CAPTUREASSERT | PPS_CAPTURECLEAR;
184 	sc->pps_state.driver_abi = PPS_ABI_VERSION;
185 	sc->pps_state.driver_mtx = &sc->pps_mtx;
186 	pps_init_abi(&sc->pps_state);
187 
188 	/* Check which edge we're configured to capture (default is rising). */
189 	if (ofw_bus_has_prop(dev, "assert-falling-edge"))
190 		edge = GPIO_INTR_EDGE_FALLING;
191 	else
192 		edge = GPIO_INTR_EDGE_RISING;
193 
194 	/*
195 	 * Look up the configured gpio pin and ensure it can be configured for
196 	 * the interrupt mode we need.
197 	 */
198 	node = ofw_bus_get_node(dev);
199 	if ((err = gpio_pin_get_by_ofw_idx(dev, node, 0, &sc->gpin)) != 0) {
200 		device_printf(dev, "Cannot obtain gpio pin\n");
201 		return (err);
202 	}
203 	device_printf(dev, "PPS input on %s pin %u\n",
204 	    device_get_nameunit(sc->gpin->dev), sc->gpin->pin);
205 
206 	if ((err = gpio_pin_getcaps(sc->gpin, &pincaps)) != 0) {
207 		device_printf(dev, "Cannot query capabilities of gpio pin\n");
208 		gpiopps_detach(dev);
209 		return (err);
210 	}
211 	if ((pincaps & edge) == 0) {
212 		device_printf(dev, "Pin cannot be configured for the requested signal edge\n");
213 		gpiopps_detach(dev);
214 		return (ENOTSUP);
215 	}
216 
217 	/*
218 	 * Transform our 'gpios' property into an interrupt resource and set up
219 	 * the interrupt.
220 	 */
221 	if ((sc->ires = gpio_alloc_intr_resource(dev, &sc->irid, RF_ACTIVE,
222 	    sc->gpin, edge)) == NULL) {
223 		device_printf(dev, "Cannot allocate an IRQ for the GPIO\n");
224 		gpiopps_detach(dev);
225 		return (err);
226 	}
227 
228 	err = bus_setup_intr(dev, sc->ires, INTR_TYPE_CLK | INTR_MPSAFE,
229 	    gpiopps_ifltr, gpiopps_ithrd, sc, &sc->ihandler);
230 	if (err != 0) {
231 		device_printf(dev, "Unable to setup pps irq handler\n");
232 		gpiopps_detach(dev);
233 		return (err);
234 	}
235 
236 	/* Create the RFC 2783 pps-api cdev. */
237 	make_dev_args_init(&devargs);
238 	devargs.mda_devsw = &pps_cdevsw;
239 	devargs.mda_uid = UID_ROOT;
240 	devargs.mda_gid = GID_WHEEL;
241 	devargs.mda_mode = 0660;
242 	devargs.mda_si_drv1 = sc;
243 	err = make_dev_s(&devargs, &sc->pps_cdev, PPS_CDEV_NAME "%d",
244 	    device_get_unit(dev));
245 	if (err != 0) {
246 		device_printf(dev, "Unable to create pps cdev\n");
247 		gpiopps_detach(dev);
248 		return (err);
249 	}
250 
251 	return (0);
252 }
253 
254 static int
255 gpiopps_fdt_probe(device_t dev)
256 {
257 
258 	if (!ofw_bus_status_okay(dev))
259 		return (ENXIO);
260 
261 	if (ofw_bus_search_compatible(dev, compat_data)->ocd_data != 0) {
262 		device_set_desc(dev, "GPIO PPS");
263 		return (BUS_PROBE_DEFAULT);
264 	}
265 
266 	return (ENXIO);
267 }
268 
269 static device_method_t pps_fdt_methods[] = {
270 	DEVMETHOD(device_probe,		gpiopps_fdt_probe),
271 	DEVMETHOD(device_attach,	gpiopps_fdt_attach),
272 	DEVMETHOD(device_detach,	gpiopps_detach),
273 
274 	DEVMETHOD_END
275 };
276 
277 static driver_t pps_fdt_driver = {
278 	"gpiopps",
279 	pps_fdt_methods,
280 	sizeof(struct pps_softc),
281 };
282 
283 DRIVER_MODULE(gpiopps, simplebus, pps_fdt_driver, 0, 0);
284 
285 #endif /* FDT */
286