xref: /freebsd/sys/dev/iicbus/gpio/pcf8574.c (revision 266f97b5)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause
3  *
4  * Copyright (c) Andriy Gapon
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions, and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
19  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25  * SUCH DAMAGE.
26  *
27  */
28 
29 /*
30  * Driver for PCF8574 / PCF8574A 8-bit I/O expander
31  * with quasi-bidirectional I/O.
32  * There is no separate mode / configuration register.
33  * Pins are set and queried via a single register.
34  * Because of that we have to maintain the state in the driver
35  * and assume that there is no outside meddling with the device.
36  * See the datasheet for details.
37  */
38 
39 #include <sys/cdefs.h>
40 __FBSDID("$FreeBSD$");
41 
42 #include "opt_platform.h"
43 
44 #include <sys/param.h>
45 #include <sys/bus.h>
46 #include <sys/gpio.h>
47 #include <sys/kernel.h>
48 #include <sys/module.h>
49 #include <sys/systm.h>
50 #include <sys/sx.h>
51 
52 #ifdef FDT
53 #include <dev/ofw/openfirm.h>
54 #include <dev/ofw/ofw_bus.h>
55 #include <dev/ofw/ofw_bus_subr.h>
56 #endif
57 
58 #include <dev/iicbus/iicbus.h>
59 #include <dev/iicbus/iiconf.h>
60 
61 #include <dev/gpio/gpiobusvar.h>
62 
63 #include "gpio_if.h"
64 
65 #define	NUM_PINS	8
66 #define	PIN_CAPS	(GPIO_PIN_OUTPUT | GPIO_PIN_INPUT)
67 
68 #define	dbg_dev_printf(dev, fmt, args...)	\
69 	if (bootverbose) device_printf(dev, fmt, ##args)
70 
71 struct pcf8574_softc {
72 	device_t	dev;
73 	device_t	busdev;
74 	struct sx	lock;
75 	uint8_t		addr;
76 	uint8_t		output_mask;
77 	uint8_t		output_state;
78 };
79 
80 #ifdef FDT
81 static struct ofw_compat_data compat_data[] = {
82 	{ "nxp,pcf8574",	1 },
83 	{ "nxp,pcf8574a",	1 },
84 	{ NULL,			0 }
85 };
86 #endif
87 
88 static int
89 pcf8574_read(struct pcf8574_softc *sc, uint8_t *val)
90 {
91 	struct iic_msg msg;
92 	int error;
93 
94 	msg.slave = sc->addr;
95 	msg.flags = IIC_M_RD;
96 	msg.len = 1;
97 	msg.buf = val;
98 
99 	error = iicbus_transfer_excl(sc->dev, &msg, 1, IIC_WAIT);
100 	return (iic2errno(error));
101 }
102 
103 static int
104 pcf8574_write(struct pcf8574_softc *sc, uint8_t val)
105 {
106 	struct iic_msg msg;
107 	int error;
108 
109 	msg.slave = sc->addr;
110 	msg.flags = IIC_M_WR;
111 	msg.len = 1;
112 	msg.buf = &val;
113 
114 	error = iicbus_transfer_excl(sc->dev, &msg, 1, IIC_WAIT);
115 	return (iic2errno(error));
116 }
117 
118 static int
119 pcf8574_probe(device_t dev)
120 {
121 
122 #ifdef FDT
123 	if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
124 		return (ENXIO);
125 #endif
126 	device_set_desc(dev, "PCF8574 I/O expander");
127 	return (BUS_PROBE_DEFAULT);
128 }
129 
130 static int
131 pcf8574_attach(device_t dev)
132 {
133 	struct pcf8574_softc *sc;
134 
135 	sc = device_get_softc(dev);
136 	sc->dev = dev;
137 	sc->addr = iicbus_get_addr(dev);
138 
139 	/* Treat everything as input because there is no way to tell. */
140 	sc->output_mask = 0;
141 	sc->output_state = 0xff;
142 
143 	/* Put the device to a safe, known state. */
144 	(void)pcf8574_write(sc, 0xff);
145 
146 	sx_init(&sc->lock, "pcf8574");
147 	sc->busdev = gpiobus_attach_bus(dev);
148 	if (sc->busdev == NULL) {
149 		device_printf(dev, "Could not create busdev child\n");
150 		sx_destroy(&sc->lock);
151 		return (ENXIO);
152 	}
153 	return (0);
154 }
155 
156 static int
157 pcf8574_detach(device_t dev)
158 {
159 	struct pcf8574_softc *sc;
160 
161 	sc = device_get_softc(dev);
162 
163 	if (sc->busdev != NULL)
164 		gpiobus_detach_bus(sc->busdev);
165 
166 	sx_destroy(&sc->lock);
167 	return (0);
168 }
169 
170 static device_t
171 pcf8574_get_bus(device_t dev)
172 {
173 	struct pcf8574_softc *sc;
174 
175 	sc = device_get_softc(dev);
176 	return (sc->busdev);
177 }
178 
179 static int
180 pcf8574_pin_max(device_t dev __unused, int *maxpin)
181 {
182 	*maxpin = NUM_PINS - 1;
183 	return (0);
184 }
185 
186 static int
187 pcf8574_pin_getcaps(device_t dev, uint32_t pin, uint32_t *caps)
188 {
189 
190 	if (pin >= NUM_PINS)
191 		return (EINVAL);
192 	*caps = PIN_CAPS;
193 	return (0);
194 }
195 
196 static int
197 pcf8574_pin_getflags(device_t dev, uint32_t pin, uint32_t *pflags)
198 {
199 	struct pcf8574_softc *sc;
200 	uint8_t val, stale;
201 	int error;
202 
203 	sc = device_get_softc(dev);
204 
205 	if (pin >= NUM_PINS)
206 		return (EINVAL);
207 
208 	sx_xlock(&sc->lock);
209 	error = pcf8574_read(sc, &val);
210 	if (error != 0) {
211 		dbg_dev_printf(dev, "failed to read from device: %d\n",
212 		    error);
213 		sx_xunlock(&sc->lock);
214 		return (error);
215 	}
216 
217 	/*
218 	 * Check for pins whose read value is one, but they are configured
219 	 * as outputs with low signal.  This is an impossible combination,
220 	 * so change their view to be inputs.
221 	 */
222 	stale = val & sc->output_mask & ~sc->output_state;
223 	sc->output_mask &= ~stale;
224 	sc->output_state |= stale;
225 
226 	if ((sc->output_mask & (1 << pin)) != 0)
227 		*pflags = GPIO_PIN_OUTPUT;
228 	else
229 		*pflags = GPIO_PIN_INPUT;
230 	sx_xunlock(&sc->lock);
231 
232 	return (0);
233 }
234 
235 static int
236 pcf8574_pin_setflags(device_t dev, uint32_t pin, uint32_t flags)
237 {
238 	struct pcf8574_softc *sc;
239 	int error;
240 	uint8_t val;
241 	bool update_needed;
242 
243 	sc = device_get_softc(dev);
244 
245 	if (pin >= NUM_PINS)
246 		return (EINVAL);
247 	if ((flags & ~PIN_CAPS) != 0)
248 		return (EINVAL);
249 
250 	sx_xlock(&sc->lock);
251 	if ((flags & GPIO_PIN_OUTPUT) != 0) {
252 		sc->output_mask |= 1 << pin;
253 		update_needed = false;
254 	} else if ((flags & GPIO_PIN_INPUT) != 0) {
255 		sc->output_mask &= ~(1 << pin);
256 		sc->output_state |= 1 << pin;
257 		update_needed = true;
258 	} else {
259 		KASSERT(false, ("both input and output modes requested"));
260 		update_needed = false;
261 	}
262 
263 	if (update_needed) {
264 		val = sc->output_state | ~sc->output_mask;
265 		error = pcf8574_write(sc, val);
266 		if (error != 0)
267 			dbg_dev_printf(dev, "failed to write to device: %d\n",
268 			    error);
269 	}
270 	sx_xunlock(&sc->lock);
271 
272 	return (0);
273 }
274 
275 static int
276 pcf8574_pin_getname(device_t dev, uint32_t pin, char *name)
277 {
278 
279 	if (pin >= NUM_PINS)
280 		return (EINVAL);
281 	snprintf(name, GPIOMAXNAME, "P%d", pin);
282 	return (0);
283 }
284 
285 static int
286 pcf8574_pin_get(device_t dev, uint32_t pin, unsigned int *on)
287 {
288 	struct pcf8574_softc *sc;
289 	uint8_t val;
290 	int error;
291 
292 	sc = device_get_softc(dev);
293 
294 	sx_xlock(&sc->lock);
295 	if ((sc->output_mask & (1 << pin)) != 0) {
296 		*on = (sc->output_state & (1 << pin)) != 0;
297 		sx_xunlock(&sc->lock);
298 		return (0);
299 	}
300 
301 	error = pcf8574_read(sc, &val);
302 	if (error != 0) {
303 		dbg_dev_printf(dev, "failed to read from device: %d\n", error);
304 		sx_xunlock(&sc->lock);
305 		return (error);
306 	}
307 	sx_xunlock(&sc->lock);
308 
309 	*on = (val & (1 << pin)) != 0;
310 	return (0);
311 }
312 
313 static int
314 pcf8574_pin_set(device_t dev, uint32_t pin, unsigned int on)
315 {
316 	struct pcf8574_softc *sc;
317 	uint8_t val;
318 	int error;
319 
320 	sc = device_get_softc(dev);
321 
322 	if (pin >= NUM_PINS)
323 		return (EINVAL);
324 
325 	sx_xlock(&sc->lock);
326 
327 	if ((sc->output_mask & (1 << pin)) == 0) {
328 		sx_xunlock(&sc->lock);
329 		return (EINVAL);
330 	}
331 
332 	/*
333 	 * Algorithm:
334 	 * - set all outputs to their recorded state;
335 	 * - set all inputs to the high state;
336 	 * - apply the requested change.
337 	 */
338 	val = sc->output_state | ~sc->output_mask;
339 	val &= ~(1 << pin);
340 	val |= (on != 0) << pin;
341 
342 	error = pcf8574_write(sc, val);
343 	if (error != 0) {
344 		dbg_dev_printf(dev, "failed to write to device: %d\n", error);
345 		sx_xunlock(&sc->lock);
346 		return (error);
347 	}
348 
349 	/*
350 	 * NB: we can record anything as "output" state of input pins.
351 	 * By convention and for convenience it will be recorded as 1.
352 	 */
353 	sc->output_state = val;
354 	sx_xunlock(&sc->lock);
355 	return (0);
356 }
357 
358 static int
359 pcf8574_pin_toggle(device_t dev, uint32_t pin)
360 {
361 	struct pcf8574_softc *sc;
362 	uint8_t val;
363 	int error;
364 
365 	sc = device_get_softc(dev);
366 
367 	if (pin >= NUM_PINS)
368 		return (EINVAL);
369 
370 	sx_xlock(&sc->lock);
371 
372 	if ((sc->output_mask & (1 << pin)) == 0) {
373 		sx_xunlock(&sc->lock);
374 		return (EINVAL);
375 	}
376 
377 	val = sc->output_state | ~sc->output_mask;
378 	val ^= 1 << pin;
379 
380 	error = pcf8574_write(sc, val);
381 	if (error != 0) {
382 		dbg_dev_printf(dev, "failed to write to device: %d\n", error);
383 		sx_xunlock(&sc->lock);
384 		return (error);
385 	}
386 
387 	sc->output_state = val;
388 	sx_xunlock(&sc->lock);
389 	return (0);
390 }
391 
392 static device_method_t pcf8574_methods[] = {
393 	DEVMETHOD(device_probe,		pcf8574_probe),
394 	DEVMETHOD(device_attach,	pcf8574_attach),
395 	DEVMETHOD(device_detach,	pcf8574_detach),
396 
397 	/* GPIO methods */
398 	DEVMETHOD(gpio_get_bus,		pcf8574_get_bus),
399 	DEVMETHOD(gpio_pin_max,		pcf8574_pin_max),
400 	DEVMETHOD(gpio_pin_getcaps,	pcf8574_pin_getcaps),
401 	DEVMETHOD(gpio_pin_getflags,	pcf8574_pin_getflags),
402 	DEVMETHOD(gpio_pin_setflags,	pcf8574_pin_setflags),
403 	DEVMETHOD(gpio_pin_getname,	pcf8574_pin_getname),
404 	DEVMETHOD(gpio_pin_get,		pcf8574_pin_get),
405 	DEVMETHOD(gpio_pin_set,		pcf8574_pin_set),
406 	DEVMETHOD(gpio_pin_toggle,	pcf8574_pin_toggle),
407 
408 	DEVMETHOD_END
409 };
410 
411 static driver_t pcf8574_driver = {
412 	"gpio",
413 	pcf8574_methods,
414 	sizeof(struct pcf8574_softc)
415 };
416 
417 static devclass_t pcf8574_devclass;
418 
419 DRIVER_MODULE(pcf8574, iicbus, pcf8574_driver, pcf8574_devclass, 0, 0);
420 MODULE_DEPEND(pcf8574, iicbus, IICBUS_MINVER, IICBUS_PREFVER, IICBUS_MAXVER);
421 MODULE_DEPEND(pcf8574, gpiobus, 1, 1, 1);
422 MODULE_VERSION(pcf8574, 1);
423 #ifdef FDT
424 IICBUS_FDT_PNP_INFO(compat_data);
425 #endif
426