dev/ips/ips.c

/*-
 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
 *
 * Written by: David Jeffery
 * Copyright (c) 2002 Adaptec Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

#include <dev/ips/ipsreg.h>
#include <dev/ips/ips.h>
#include <sys/stat.h>
#include <sys/time.h>

static d_open_t ips_open;
static d_close_t ips_close;
static d_ioctl_t ips_ioctl;

MALLOC_DEFINE(M_IPSBUF, "ipsbuf","IPS driver buffer");

static struct cdevsw ips_cdevsw = {
	.d_version =	D_VERSION,
	.d_open =	ips_open,
	.d_close =	ips_close,
	.d_ioctl =	ips_ioctl,
	.d_name =	"ips",
};

static const char* ips_adapter_name[] = {
	"N/A",
	"ServeRAID (copperhead)",
	"ServeRAID II (copperhead refresh)",
	"ServeRAID onboard (copperhead)",
	"ServeRAID onboard (copperhead)",
	"ServeRAID 3H (clarinet)",
	"ServeRAID 3L (clarinet lite)",
	"ServeRAID 4H (trombone)",
	"ServeRAID 4M (morpheus)",
	"ServeRAID 4L (morpheus lite)",
	"ServeRAID 4Mx (neo)",
	"ServeRAID 4Lx (neo lite)",
	"ServeRAID 5i II (sarasota)",
	"ServeRAID 5i (sarasota)",
	"ServeRAID 6M (marco)",
	"ServeRAID 6i (sebring)",
	"ServeRAID 7t",
	"ServeRAID 7k",
	"ServeRAID 7M"
};


static int ips_open(struct cdev *dev, int flags, int fmt, struct thread *td)
{
	ips_softc_t *sc = dev->si_drv1;
	mtx_lock(&sc->queue_mtx);
	sc->state |= IPS_DEV_OPEN;
	mtx_unlock(&sc->queue_mtx);
        return 0;
}

static int ips_close(struct cdev *dev, int flags, int fmt, struct thread *td)
{
	ips_softc_t *sc = dev->si_drv1;

	mtx_lock(&sc->queue_mtx);
	sc->state &= ~IPS_DEV_OPEN;
	mtx_unlock(&sc->queue_mtx);

        return 0;
}

static int ips_ioctl(struct cdev *dev, u_long command, caddr_t addr, int32_t flags, struct thread *td)
{
	ips_softc_t *sc;

	sc = dev->si_drv1;
	return ips_ioctl_request(sc, command, addr, flags);
}

static void ips_cmd_dmaload(void *cmdptr, bus_dma_segment_t *segments,int segnum, int error)
{
	ips_command_t *command = cmdptr;
	PRINTF(10, "ips: in ips_cmd_dmaload\n");
	if(!error)
		command->command_phys_addr = segments[0].ds_addr;

}

/* is locking needed? what locking guarantees are there on removal? */
static int ips_cmdqueue_free(ips_softc_t *sc)
{
	int i, error = -1;
	ips_command_t *command;

	if(!sc->used_commands){
		for(i = 0; i < sc->max_cmds; i++){

			command = &sc->commandarray[i];

			if(command->command_phys_addr == 0)
				continue;
			bus_dmamap_unload(sc->command_dmatag,
					  command->command_dmamap);
			bus_dmamem_free(sc->command_dmatag,
					command->command_buffer,
					command->command_dmamap);
			if (command->data_dmamap != NULL)
				bus_dmamap_destroy(command->data_dmatag,
				    command->data_dmamap);
		}
		error = 0;
		sc->state |= IPS_OFFLINE;
	}
	sc->staticcmd = NULL;
	free(sc->commandarray, M_DEVBUF);
	return error;
}

/* places all ips command structs on the free command queue.  No locking as if someone else tries
 * to access this during init, we have bigger problems */
static int ips_cmdqueue_init(ips_softc_t *sc)
{
	int i;
	ips_command_t *command;

	sc->commandarray = (ips_command_t *)malloc(sizeof(ips_command_t) *
	    sc->max_cmds, M_DEVBUF, M_NOWAIT|M_ZERO);
	if (sc->commandarray == NULL)
		return (ENOMEM);

	SLIST_INIT(&sc->free_cmd_list);
	for(i = 0; i < sc->max_cmds; i++){
		command = &sc->commandarray[i];
		command->id = i;
		command->sc = sc;

		if(bus_dmamem_alloc(sc->command_dmatag,&command->command_buffer,
		    BUS_DMA_NOWAIT, &command->command_dmamap))
			goto error;
		bus_dmamap_load(sc->command_dmatag, command->command_dmamap,
				command->command_buffer,IPS_COMMAND_LEN,
				ips_cmd_dmaload, command, BUS_DMA_NOWAIT);
		if(!command->command_phys_addr){
			bus_dmamem_free(sc->command_dmatag,
			    command->command_buffer, command->command_dmamap);
			goto error;
		}

		if (i != 0) {
			command->data_dmatag = sc->sg_dmatag;
			if (bus_dmamap_create(command->data_dmatag, 0,
			    &command->data_dmamap))
				goto error;
			SLIST_INSERT_HEAD(&sc->free_cmd_list, command, next);
		} else
			sc->staticcmd = command;
	}
	sc->state &= ~IPS_OFFLINE;
	return 0;
error:
	ips_cmdqueue_free(sc);
	return ENOMEM;
}

/* returns a free command struct if one is available.
 * It also blanks out anything that may be a wild pointer/value.
 * Also, command buffers are not freed.  They are
 * small so they are saved and kept dmamapped and loaded.
 */
int ips_get_free_cmd(ips_softc_t *sc, ips_command_t **cmd, unsigned long flags)
{
	ips_command_t *command;

	if(sc->state & IPS_OFFLINE){
		return EIO;
	}
	if ((flags & IPS_STATIC_FLAG) == 0) {
		command = SLIST_FIRST(&sc->free_cmd_list);
		if(!command || (sc->state & IPS_TIMEOUT)){
			return EBUSY;
		}
		SLIST_REMOVE_HEAD(&sc->free_cmd_list, next);
		(sc->used_commands)++;
	} else {
		if (sc->state & IPS_STATIC_BUSY)
			return EAGAIN;
		command = sc->staticcmd;
		sc->state |= IPS_STATIC_BUSY;
	}
	clear_ips_command(command);
	bzero(command->command_buffer, IPS_COMMAND_LEN);
	*cmd = command;
	return 0;
}

/* adds a command back to the free command queue */
void ips_insert_free_cmd(ips_softc_t *sc, ips_command_t *command)
{

	if (sema_value(&sc->cmd_sema) != 0)
		panic("ips: command returned non-zero semaphore");

	if (command != sc->staticcmd) {
		SLIST_INSERT_HEAD(&sc->free_cmd_list, command, next);
		(sc->used_commands)--;
	} else {
		sc->state &= ~IPS_STATIC_BUSY;
	}
}
static const char* ips_diskdev_statename(u_int8_t state)
{
	static char statebuf[20];
	switch(state){
		case IPS_LD_OFFLINE:
			return("OFFLINE");
			break;
		case IPS_LD_OKAY:
			return("OK");
			break;
		case IPS_LD_DEGRADED:
			return("DEGRADED");
			break;
		case IPS_LD_FREE:
			return("FREE");
			break;
		case IPS_LD_SYS:
			return("SYS");
			break;
		case IPS_LD_CRS:
			return("CRS");
			break;
	}
	sprintf(statebuf,"UNKNOWN(0x%02x)", state);
	return(statebuf);
}

static int ips_diskdev_init(ips_softc_t *sc)
{
	int i;
	for(i=0; i < IPS_MAX_NUM_DRIVES; i++){
		if(sc->drives[i].state == IPS_LD_FREE) continue;
		device_printf(sc->dev, "Logical Drive %d: RAID%d sectors: %u, state %s\n",
			i, sc->drives[i].raid_lvl,
			sc->drives[i].sector_count,
			ips_diskdev_statename(sc->drives[i].state));
		if(sc->drives[i].state == IPS_LD_OKAY ||
		   sc->drives[i].state == IPS_LD_DEGRADED){
			sc->diskdev[i] = device_add_child(sc->dev, NULL, -1);
			device_set_ivars(sc->diskdev[i],(void *)(uintptr_t) i);
		}
	}
	if(bus_generic_attach(sc->dev)){
		device_printf(sc->dev, "Attaching bus failed\n");
	}
	return 0;
}

static int ips_diskdev_free(ips_softc_t *sc)
{
	int i;
	int error = 0;
	for(i = 0; i < IPS_MAX_NUM_DRIVES; i++){
		if(sc->diskdev[i])
			error = device_delete_child(sc->dev, sc->diskdev[i]);
			if(error)
				return error;
	}
	bus_generic_detach(sc->dev);
	return 0;
}

/* ips_timeout is periodically called to make sure no commands sent
 * to the card have become stuck.  If it finds a stuck command, it
 * sets a flag so the driver won't start any more commands and then
 * is periodically called to see if all outstanding commands have
 * either finished or timed out.  Once timed out, an attempt to
 * reinitialize the card is made.  If that fails, the driver gives
 * up and declares the card dead. */
static void ips_timeout(void *arg)
{
	ips_softc_t *sc = arg;
	int i, state = 0;
	ips_command_t *command;

	mtx_assert(&sc->queue_mtx, MA_OWNED);
	command = &sc->commandarray[0];
	for(i = 0; i < sc->max_cmds; i++){
		if(!command[i].timeout){
			continue;
		}
		command[i].timeout--;
		if(!command[i].timeout){
			if(!(sc->state & IPS_TIMEOUT)){
				sc->state |= IPS_TIMEOUT;
				device_printf(sc->dev, "WARNING: command timeout. Adapter is in toaster mode, resetting to known state\n");
			}
			ips_set_error(&command[i], ETIMEDOUT);
			command[i].callback(&command[i]);
			/* hmm, this should be enough cleanup */
		} else
			state = 1;
	}
	if(!state && (sc->state & IPS_TIMEOUT)){
		if(sc->ips_adapter_reinit(sc, 1)){
			device_printf(sc->dev, "AIEE! adapter reset failed, giving up and going home! Have a nice day.\n");
			sc->state |= IPS_OFFLINE;
			sc->state &= ~IPS_TIMEOUT;
			/* Grr, I hate this solution. I run waiting commands
			   one at a time and error them out just before they
			   would go to the card. This sucks. */
		} else
			sc->state &= ~IPS_TIMEOUT;
	}
	if (sc->state != IPS_OFFLINE)
		callout_reset(&sc->timer, 10 * hz, ips_timeout, sc);
}

/* check card and initialize it */
int ips_adapter_init(ips_softc_t *sc)
{
        int i;
        DEVICE_PRINTF(1,sc->dev, "initializing\n");

        if (bus_dma_tag_create(	/* parent    */	sc->adapter_dmatag,
				/* alignemnt */	1,
				/* boundary  */	0,
				/* lowaddr   */	BUS_SPACE_MAXADDR_32BIT,
				/* highaddr  */	BUS_SPACE_MAXADDR,
				/* filter    */	NULL,
				/* filterarg */	NULL,
				/* maxsize   */	IPS_COMMAND_LEN +
						    IPS_MAX_SG_LEN,
				/* numsegs   */	1,
				/* maxsegsize*/	IPS_COMMAND_LEN +
						    IPS_MAX_SG_LEN,
				/* flags     */	0,
				/* lockfunc  */ NULL,
				/* lockarg   */ NULL,
				&sc->command_dmatag) != 0) {
                device_printf(sc->dev, "can't alloc command dma tag\n");
		goto error;
        }
	if (bus_dma_tag_create(	/* parent    */	sc->adapter_dmatag,
				/* alignemnt */	1,
				/* boundary  */	0,
				/* lowaddr   */	BUS_SPACE_MAXADDR_32BIT,
				/* highaddr  */	BUS_SPACE_MAXADDR,
				/* filter    */	NULL,
				/* filterarg */	NULL,
				/* maxsize   */	IPS_MAX_IOBUF_SIZE,
				/* numsegs   */	IPS_MAX_SG_ELEMENTS,
				/* maxsegsize*/	IPS_MAX_IOBUF_SIZE,
				/* flags     */	0,
				/* lockfunc  */ busdma_lock_mutex,
				/* lockarg   */ &sc->queue_mtx,
				&sc->sg_dmatag) != 0) {
		device_printf(sc->dev, "can't alloc SG dma tag\n");
		goto error;
	}
	/* create one command buffer until we know how many commands this card
           can handle */
	sc->max_cmds = 1;
	ips_cmdqueue_init(sc);

	if(sc->ips_adapter_reinit(sc, 0))
		goto error;

	/* initialize ffdc values */
	microtime(&sc->ffdc_resettime);
	sc->ffdc_resetcount = 1;
	if ((i = ips_ffdc_reset(sc)) != 0) {
		device_printf(sc->dev, "failed to send ffdc reset to device (%d)\n", i);
		goto error;
	}
	if ((i = ips_get_adapter_info(sc)) != 0) {
		device_printf(sc->dev, "failed to get adapter configuration data from device (%d)\n", i);
		goto error;
	}
	ips_update_nvram(sc); /* no error check as failure doesn't matter */
	if(sc->adapter_type > 0 && sc->adapter_type <= IPS_ADAPTER_MAX_T){
		device_printf(sc->dev, "adapter type: %s\n", ips_adapter_name[sc->adapter_type]);
	}
 	if ((i = ips_get_drive_info(sc)) != 0) {
		device_printf(sc->dev, "failed to get drive configuration data from device (%d)\n", i);
		goto error;
	}

        ips_cmdqueue_free(sc);
	if(sc->adapter_info.max_concurrent_cmds)
        	sc->max_cmds = min(128, sc->adapter_info.max_concurrent_cmds);
	else
		sc->max_cmds = 32;
        if(ips_cmdqueue_init(sc)){
		device_printf(sc->dev, "failed to initialize command buffers\n");
		goto error;
	}
        sc->device_file = make_dev(&ips_cdevsw, device_get_unit(sc->dev), UID_ROOT, GID_OPERATOR,
                                        S_IRUSR | S_IWUSR, "ips%d", device_get_unit(sc->dev));
	sc->device_file->si_drv1 = sc;
	ips_diskdev_init(sc);
	callout_reset(&sc->timer, 10 * hz, ips_timeout, sc);
        return 0;

error:
	ips_adapter_free(sc);
	return ENXIO;
}

/* see if we should reinitialize the card and wait for it to timeout or complete initialization */
int ips_morpheus_reinit(ips_softc_t *sc, int force)
{
        u_int32_t tmp;
	int i;

	tmp = ips_read_4(sc, MORPHEUS_REG_OISR);
	if(!force && (ips_read_4(sc, MORPHEUS_REG_OMR0) >= IPS_POST1_OK) &&
	    (ips_read_4(sc, MORPHEUS_REG_OMR1) != 0xdeadbeef) && !tmp){
		ips_write_4(sc, MORPHEUS_REG_OIMR, 0);
		return 0;
	}
	ips_write_4(sc, MORPHEUS_REG_OIMR, 0xff);
	ips_read_4(sc, MORPHEUS_REG_OIMR);

	device_printf(sc->dev, "resetting adapter, this may take up to 5 minutes\n");
	ips_write_4(sc, MORPHEUS_REG_IDR, 0x80000000);
	DELAY(5000000);
	ips_read_4(sc, MORPHEUS_REG_OIMR);

	tmp = ips_read_4(sc, MORPHEUS_REG_OISR);
	for(i = 0; i < 45 && !(tmp & MORPHEUS_BIT_POST1); i++){
		DELAY(1000000);
		DEVICE_PRINTF(2, sc->dev, "post1: %d\n", i);
		tmp = ips_read_4(sc, MORPHEUS_REG_OISR);
	}
	if(tmp & MORPHEUS_BIT_POST1)
		ips_write_4(sc, MORPHEUS_REG_OISR, MORPHEUS_BIT_POST1);

        if( i == 45 || ips_read_4(sc, MORPHEUS_REG_OMR0) < IPS_POST1_OK){
                device_printf(sc->dev,"Adapter error during initialization.\n");
		return 1;
        }
	for(i = 0; i < 240 && !(tmp & MORPHEUS_BIT_POST2); i++){
		DELAY(1000000);
		DEVICE_PRINTF(2, sc->dev, "post2: %d\n", i);
		tmp = ips_read_4(sc, MORPHEUS_REG_OISR);
	}
	if(tmp & MORPHEUS_BIT_POST2)
		ips_write_4(sc, MORPHEUS_REG_OISR, MORPHEUS_BIT_POST2);

	if(i == 240 || !ips_read_4(sc, MORPHEUS_REG_OMR1)){
		device_printf(sc->dev, "adapter failed config check\n");
		return 1;
        }
	ips_write_4(sc, MORPHEUS_REG_OIMR, 0);
	if(force && ips_clear_adapter(sc)){
		device_printf(sc->dev, "adapter clear failed\n");
		return 1;
	}
	return 0;
}

/* clean up so we can unload the driver. */
int ips_adapter_free(ips_softc_t *sc)
{
	int error = 0;
	if(sc->state & IPS_DEV_OPEN)
		return EBUSY;
	if((error = ips_diskdev_free(sc)))
		return error;
	if(ips_cmdqueue_free(sc)){
		device_printf(sc->dev,
		     "trying to exit when command queue is not empty!\n");
		return EBUSY;
	}
	DEVICE_PRINTF(1, sc->dev, "free\n");
	callout_drain(&sc->timer);

	if(sc->sg_dmatag)
		bus_dma_tag_destroy(sc->sg_dmatag);
	if(sc->command_dmatag)
		bus_dma_tag_destroy(sc->command_dmatag);
	if(sc->device_file)
	        destroy_dev(sc->device_file);
        return 0;
}

static __inline int ips_morpheus_check_intr(ips_softc_t *sc)
{
	int cmdnumber;
	ips_cmd_status_t status;
	ips_command_t *command;
	int found = 0;
	u_int32_t oisr;

	oisr = ips_read_4(sc, MORPHEUS_REG_OISR);
	PRINTF(9, "interrupt registers out:%x\n", oisr);
	if(!(oisr & MORPHEUS_BIT_CMD_IRQ)){
		DEVICE_PRINTF(2,sc->dev, "got a non-command irq\n");
		return (0);
	}
	while((status.value = ips_read_4(sc, MORPHEUS_REG_OQPR)) != 0xffffffff){
		cmdnumber = status.fields.command_id;
		command = &sc->commandarray[cmdnumber];
		command->status.value = status.value;
		command->timeout = 0;
		command->callback(command);

		found = 1;
	}
        return (found);
}

void ips_morpheus_intr(void *void_sc)
{
	ips_softc_t *sc = void_sc;

	mtx_lock(&sc->queue_mtx);
	ips_morpheus_check_intr(sc);
	mtx_unlock(&sc->queue_mtx);
}

void ips_morpheus_poll(ips_command_t *command)
{
	uint32_t ts;

	/*
	 * Locks are not used here because this is only called during
	 * crashdumps.
	 */
	ts = time_second + command->timeout;
	while ((command->timeout != 0)
	 && (ips_morpheus_check_intr(command->sc) == 0)
	 && (ts > time_second))
		DELAY(1000);
}

void ips_issue_morpheus_cmd(ips_command_t *command)
{
	/* hmmm, is there a cleaner way to do this? */
	if(command->sc->state & IPS_OFFLINE){
		ips_set_error(command, EINVAL);
		command->callback(command);
		return;
	}
	command->timeout = 10;
	ips_write_4(command->sc, MORPHEUS_REG_IQPR, command->command_phys_addr);
}

static void ips_copperhead_queue_callback(void *queueptr, bus_dma_segment_t *segments,int segnum, int error)
{
	ips_copper_queue_t *queue = queueptr;
	if(error){
		return;
	}
	queue->base_phys_addr = segments[0].ds_addr;
}

static int ips_copperhead_queue_init(ips_softc_t *sc)
{
	int error;
	bus_dma_tag_t dmatag;
	bus_dmamap_t dmamap;
       	if (bus_dma_tag_create(	/* parent    */	sc->adapter_dmatag,
				/* alignemnt */	1,
				/* boundary  */	0,
				/* lowaddr   */	BUS_SPACE_MAXADDR_32BIT,
				/* highaddr  */	BUS_SPACE_MAXADDR,
				/* filter    */	NULL,
				/* filterarg */	NULL,
				/* maxsize   */	sizeof(ips_copper_queue_t),
				/* numsegs   */	1,
				/* maxsegsize*/	sizeof(ips_copper_queue_t),
				/* flags     */	0,
				/* lockfunc  */ NULL,
				/* lockarg   */ NULL,
				&dmatag) != 0) {
                device_printf(sc->dev, "can't alloc dma tag for statue queue\n");
		error = ENOMEM;
		return error;
        }
	if(bus_dmamem_alloc(dmatag, (void *)&(sc->copper_queue),
	   		    BUS_DMA_NOWAIT, &dmamap)){
		error = ENOMEM;
		goto exit;
	}
	bzero(sc->copper_queue, sizeof(ips_copper_queue_t));
	sc->copper_queue->dmatag = dmatag;
	sc->copper_queue->dmamap = dmamap;
	sc->copper_queue->nextstatus = 1;
	bus_dmamap_load(dmatag, dmamap,
			&(sc->copper_queue->status[0]), IPS_MAX_CMD_NUM * 4,
			ips_copperhead_queue_callback, sc->copper_queue,
			BUS_DMA_NOWAIT);
	if(sc->copper_queue->base_phys_addr == 0){
		error = ENOMEM;
		goto exit;
	}
	ips_write_4(sc, COPPER_REG_SQSR, sc->copper_queue->base_phys_addr);
	ips_write_4(sc, COPPER_REG_SQER, sc->copper_queue->base_phys_addr +
		    IPS_MAX_CMD_NUM * 4);
	ips_write_4(sc, COPPER_REG_SQHR, sc->copper_queue->base_phys_addr + 4);
	ips_write_4(sc, COPPER_REG_SQTR, sc->copper_queue->base_phys_addr);


	return 0;
exit:
	if (sc->copper_queue != NULL)
		bus_dmamem_free(dmatag, sc->copper_queue, dmamap);
	bus_dma_tag_destroy(dmatag);
	return error;
}

/* see if we should reinitialize the card and wait for it to timeout or complete initialization FIXME */
int ips_copperhead_reinit(ips_softc_t *sc, int force)
{
	int i, j;
	u_int32_t postcode = 0, configstatus = 0;
	ips_write_1(sc, COPPER_REG_SCPR, 0x80);
	ips_write_1(sc, COPPER_REG_SCPR, 0);
	device_printf(sc->dev, "reinitializing adapter, this could take several minutes.\n");
	for(j = 0; j < 2; j++){
		postcode <<= 8;
		for(i = 0; i < 45; i++){
			if(ips_read_1(sc, COPPER_REG_HISR) & COPPER_GHI_BIT){
				postcode |= ips_read_1(sc, COPPER_REG_ISPR);
				ips_write_1(sc, COPPER_REG_HISR,
					    COPPER_GHI_BIT);
				break;
			} else
				DELAY(1000000);
		}
		if(i == 45)
			return 1;
	}
	for(j = 0; j < 2; j++){
		configstatus <<= 8;
		for(i = 0; i < 240; i++){
			if(ips_read_1(sc, COPPER_REG_HISR) & COPPER_GHI_BIT){
				configstatus |= ips_read_1(sc, COPPER_REG_ISPR);
				ips_write_1(sc, COPPER_REG_HISR,
					    COPPER_GHI_BIT);
				break;
			} else
				DELAY(1000000);
		}
		if(i == 240)
			return 1;
	}
	for(i = 0; i < 240; i++){
		if(!(ips_read_1(sc, COPPER_REG_CBSP) & COPPER_OP_BIT)){
			break;
		} else
			DELAY(1000000);
	}
	if(i == 240)
		return 1;
	ips_write_2(sc, COPPER_REG_CCCR, 0x1000 | COPPER_ILE_BIT);
	ips_write_1(sc, COPPER_REG_SCPR, COPPER_EBM_BIT);
	ips_copperhead_queue_init(sc);
	ips_write_1(sc, COPPER_REG_HISR, COPPER_GHI_BIT);
	i = ips_read_1(sc, COPPER_REG_SCPR);
	ips_write_1(sc, COPPER_REG_HISR, COPPER_EI_BIT);
	if(!configstatus){
		device_printf(sc->dev, "adapter initialization failed\n");
		return 1;
	}
	if(force && ips_clear_adapter(sc)){
		device_printf(sc->dev, "adapter clear failed\n");
		return 1;
	}
	return 0;
}
static u_int32_t ips_copperhead_cmd_status(ips_softc_t *sc)
{
	u_int32_t value;
	int statnum = sc->copper_queue->nextstatus++;
	if(sc->copper_queue->nextstatus == IPS_MAX_CMD_NUM)
		sc->copper_queue->nextstatus = 0;
	value = sc->copper_queue->status[statnum];
	ips_write_4(sc, COPPER_REG_SQTR, sc->copper_queue->base_phys_addr +
		    4 * statnum);
	return value;
}


void ips_copperhead_intr(void *void_sc)
{
        ips_softc_t *sc = (ips_softc_t *)void_sc;
	int cmdnumber;
	ips_cmd_status_t status;

	mtx_lock(&sc->queue_mtx);
	while(ips_read_1(sc, COPPER_REG_HISR) & COPPER_SCE_BIT){
		status.value = ips_copperhead_cmd_status(sc);
		cmdnumber = status.fields.command_id;
		sc->commandarray[cmdnumber].status.value = status.value;
		sc->commandarray[cmdnumber].timeout = 0;
		sc->commandarray[cmdnumber].callback(&(sc->commandarray[cmdnumber]));
		PRINTF(9, "ips: got command %d\n", cmdnumber);
	}
	mtx_unlock(&sc->queue_mtx);
        return;
}

void ips_issue_copperhead_cmd(ips_command_t *command)
{
	int i;
	/* hmmm, is there a cleaner way to do this? */
	if(command->sc->state & IPS_OFFLINE){
		ips_set_error(command, EINVAL);
		command->callback(command);
		return;
	}
	command->timeout = 10;
	for(i = 0; ips_read_4(command->sc, COPPER_REG_CCCR) & COPPER_SEM_BIT;
	    i++ ){
		if( i == 20){
printf("sem bit still set, can't send a command\n");
			return;
		}
		DELAY(500);/* need to do a delay here */
	}
	ips_write_4(command->sc, COPPER_REG_CCSAR, command->command_phys_addr);
	ips_write_2(command->sc, COPPER_REG_CCCR, COPPER_CMD_START);
}

void ips_copperhead_poll(ips_command_t *command)
{

	printf("ips: cmd polling not implemented for copperhead devices\n");
}