1 /*- 2 * This file is provided under a dual BSD/GPLv2 license. When using or 3 * redistributing this file, you may do so under either license. 4 * 5 * GPL LICENSE SUMMARY 6 * 7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of version 2 of the GNU General Public License as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 * General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 21 * The full GNU General Public License is included in this distribution 22 * in the file called LICENSE.GPL. 23 * 24 * BSD LICENSE 25 * 26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 27 * All rights reserved. 28 * 29 * Redistribution and use in source and binary forms, with or without 30 * modification, are permitted provided that the following conditions 31 * are met: 32 * 33 * * Redistributions of source code must retain the above copyright 34 * notice, this list of conditions and the following disclaimer. 35 * * Redistributions in binary form must reproduce the above copyright 36 * notice, this list of conditions and the following disclaimer in 37 * the documentation and/or other materials provided with the 38 * distribution. 39 * 40 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 41 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 42 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 43 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 44 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 45 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 46 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 47 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 48 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 49 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 50 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 51 */ 52 53 #include <sys/cdefs.h> 54 __FBSDID("$FreeBSD$"); 55 56 /** 57 * @file 58 * @brief This file contains the method implementations required to 59 * translate the SCSI start stop unit command. 60 */ 61 62 #if !defined(DISABLE_SATI_START_STOP_UNIT) 63 64 #include <dev/isci/scil/sati_start_stop_unit.h> 65 #include <dev/isci/scil/sati_util.h> 66 #include <dev/isci/scil/sati_callbacks.h> 67 #include <dev/isci/scil/intel_ata.h> 68 #include <dev/isci/scil/intel_scsi.h> 69 70 /** 71 * @brief This method will translate the start stop unit SCSI command into 72 * various ATA commands depends on the value in POWER CONTIDTION, LOEJ 73 * and START fields. 74 * For more information on the parameters passed to this method, 75 * please reference sati_translate_command(). 76 * 77 * @return Indicate if the command translation succeeded. 78 * @retval SCI_SUCCESS This is returned if the command translation was 79 * successful. 80 * @retval SATI_FAILURE_CHECK_RESPONSE_DATA Please refer to spec. 81 * 82 */ 83 SATI_STATUS sati_start_stop_unit_translate_command( 84 SATI_TRANSLATOR_SEQUENCE_T * sequence, 85 void * scsi_io, 86 void * ata_io 87 ) 88 { 89 U8 * cdb = sati_cb_get_cdb_address(scsi_io); 90 91 switch ( SATI_START_STOP_UNIT_POWER_CONDITION(cdb) ) 92 { 93 case SCSI_START_STOP_UNIT_POWER_CONDITION_START_VALID: 94 if ( SATI_START_STOP_UNIT_START_BIT(cdb) == 0 95 && SATI_START_STOP_UNIT_LOEJ_BIT(cdb) == 0 ) 96 { 97 if ( SATI_START_STOP_UNIT_NO_FLUSH_BIT(cdb) == 1 ) 98 { 99 //directly send ATA STANDBY_IMMEDIATE 100 sati_ata_standby_immediate_construct(ata_io, sequence); 101 sequence->command_specific_data.translated_command = ATA_STANDBY_IMMED; 102 } 103 else 104 { 105 if ( sequence->state != SATI_SEQUENCE_STATE_INCOMPLETE ) 106 { 107 //First, send ATA flush command. 108 sati_ata_flush_cache_construct(ata_io, sequence); 109 sequence->command_specific_data.translated_command = ATA_FLUSH_CACHE; 110 111 //remember there is next step. 112 sequence->state = SATI_SEQUENCE_STATE_INCOMPLETE; 113 } 114 else 115 { 116 //the first step, flush cache command, has completed. 117 //Send standby immediate now. 118 sati_ata_standby_immediate_construct(ata_io, sequence); 119 sequence->command_specific_data.translated_command = ATA_STANDBY_IMMED; 120 121 } 122 } 123 } 124 else if ( SATI_START_STOP_UNIT_START_BIT(cdb) == 0 125 && SATI_START_STOP_UNIT_LOEJ_BIT(cdb) == 1 ) 126 { 127 //need to know whether the device supports removable medial feature set. 128 if (sequence->device->capabilities & SATI_DEVICE_CAP_REMOVABLE_MEDIA) 129 { 130 //send ATA MEDIA EJECT command. 131 sati_ata_media_eject_construct(ata_io, sequence); 132 sequence->command_specific_data.translated_command = ATA_MEDIA_EJECT; 133 } 134 else 135 { 136 sati_scsi_sense_data_construct( 137 sequence, 138 scsi_io, 139 SCSI_STATUS_CHECK_CONDITION, 140 SCSI_SENSE_ILLEGAL_REQUEST, 141 SCSI_ASC_INVALID_FIELD_IN_CDB, 142 SCSI_ASCQ_INVALID_FIELD_IN_CDB 143 ); 144 return SATI_FAILURE_CHECK_RESPONSE_DATA; 145 } 146 } 147 else if ( SATI_START_STOP_UNIT_START_BIT(cdb) == 1 148 && SATI_START_STOP_UNIT_LOEJ_BIT(cdb) == 0 ) 149 { 150 //send an ATA verify command 151 sati_ata_read_verify_sectors_construct(ata_io, sequence); 152 sequence->command_specific_data.translated_command = ATA_READ_VERIFY_SECTORS; 153 } 154 else if ( SATI_START_STOP_UNIT_START_BIT(cdb) == 1 155 && SATI_START_STOP_UNIT_LOEJ_BIT(cdb) == 1 ) 156 { 157 sati_scsi_sense_data_construct( 158 sequence, 159 scsi_io, 160 SCSI_STATUS_CHECK_CONDITION, 161 SCSI_SENSE_ILLEGAL_REQUEST, 162 SCSI_ASC_INVALID_FIELD_IN_CDB, 163 SCSI_ASCQ_INVALID_FIELD_IN_CDB 164 ); 165 return SATI_FAILURE_CHECK_RESPONSE_DATA; 166 } 167 168 break; 169 //Power Condition Field is set to 0x01(Device to transition to Active state) 170 case SCSI_START_STOP_UNIT_POWER_CONDITION_ACTIVE: 171 172 if( sequence->state != SATI_SEQUENCE_STATE_INCOMPLETE ) 173 { 174 sati_ata_idle_construct(ata_io, sequence); 175 sequence->state = SATI_SEQUENCE_STATE_INCOMPLETE; 176 sequence->command_specific_data.translated_command = ATA_IDLE; 177 } 178 else 179 { 180 sati_ata_read_verify_sectors_construct(ata_io, sequence); 181 sequence->command_specific_data.translated_command = ATA_READ_VERIFY_SECTORS; 182 } 183 break; 184 185 //Power Condition Field is set to 0x02(Device to transition to Idle state) 186 case SCSI_START_STOP_UNIT_POWER_CONDITION_IDLE: 187 188 if( SATI_START_STOP_UNIT_NO_FLUSH_BIT(cdb) == 0 && 189 sequence->state != SATI_SEQUENCE_STATE_INCOMPLETE ) 190 { 191 sati_ata_flush_cache_construct(ata_io, sequence); 192 sequence->command_specific_data.translated_command = ATA_FLUSH_CACHE; 193 sequence->state = SATI_SEQUENCE_STATE_INCOMPLETE; 194 } 195 else 196 { 197 if( SATI_START_STOP_UNIT_POWER_CONDITION_MODIFIER(cdb) == 0 ) 198 { 199 sati_ata_idle_immediate_construct(ata_io, sequence); 200 } 201 else 202 { 203 sati_ata_idle_immediate_unload_construct(ata_io, sequence); 204 } 205 sequence->command_specific_data.translated_command = ATA_IDLE_IMMED; 206 } 207 break; 208 209 //Power Condition Field is set to 0x03(Device to transition to Standby state) 210 case SCSI_START_STOP_UNIT_POWER_CONDITION_STANDBY: 211 if( SATI_START_STOP_UNIT_NO_FLUSH_BIT(cdb) == 0 && 212 sequence->state != SATI_SEQUENCE_STATE_INCOMPLETE ) 213 { 214 sati_ata_flush_cache_construct(ata_io, sequence); 215 sequence->command_specific_data.translated_command = ATA_FLUSH_CACHE; 216 sequence->state = SATI_SEQUENCE_STATE_INCOMPLETE; 217 } 218 else 219 { 220 sati_ata_standby_immediate_construct(ata_io, sequence); 221 sequence->command_specific_data.translated_command = ATA_STANDBY_IMMED; 222 } 223 break; 224 225 //Power Condition Field is set to 0xB(force Standby state) 226 case SCSI_START_STOP_UNIT_POWER_CONDITION_FORCE_S_CONTROL: 227 228 if( SATI_START_STOP_UNIT_NO_FLUSH_BIT(cdb) == 0 && 229 sequence->state != SATI_SEQUENCE_STATE_INCOMPLETE ) 230 { 231 sati_ata_flush_cache_construct(ata_io, sequence); 232 sequence->command_specific_data.translated_command = ATA_FLUSH_CACHE; 233 sequence->state = SATI_SEQUENCE_STATE_INCOMPLETE; 234 } 235 else 236 { 237 sati_ata_standby_construct(ata_io, sequence, 0); 238 sequence->command_specific_data.translated_command = ATA_STANDBY; 239 } 240 break; 241 242 case SCSI_START_STOP_UNIT_POWER_CONDITION_LU_CONTROL: 243 default: //TBD. 244 sati_scsi_sense_data_construct( 245 sequence, 246 scsi_io, 247 SCSI_STATUS_CHECK_CONDITION, 248 SCSI_SENSE_ILLEGAL_REQUEST, 249 SCSI_ASC_INVALID_FIELD_IN_CDB, 250 SCSI_ASCQ_INVALID_FIELD_IN_CDB 251 ); 252 return SATI_FAILURE_CHECK_RESPONSE_DATA; 253 break; 254 } 255 256 if ( SATI_START_STOP_UNIT_IMMED_BIT(cdb) == 1 ) 257 { 258 //@todo: return good status now. 259 ; 260 } 261 sequence->type = SATI_SEQUENCE_START_STOP_UNIT; 262 return SATI_SUCCESS; 263 } 264 265 266 /** 267 * @brief This method will translate the ATA command register FIS 268 * response into an appropriate SCSI response for START STOP UNIT. 269 * For more information on the parameters passed to this method, 270 * please reference sati_translate_response(). 271 * 272 * @return Indicate if the response translation succeeded. 273 * @retval SCI_SUCCESS This is returned if the data translation was 274 * successful. 275 */ 276 SATI_STATUS sati_start_stop_unit_translate_response( 277 SATI_TRANSLATOR_SEQUENCE_T * sequence, 278 void * scsi_io, 279 void * ata_io 280 ) 281 { 282 U8 * register_fis = sati_cb_get_d2h_register_fis_address(ata_io); 283 U8 * cdb = sati_cb_get_cdb_address(scsi_io); 284 285 if (sati_get_ata_status(register_fis) & ATA_STATUS_REG_ERROR_BIT) 286 { 287 switch ( sequence->command_specific_data.translated_command ) 288 { 289 case ATA_FLUSH_CACHE: 290 case ATA_STANDBY_IMMED: 291 case ATA_IDLE_IMMED: 292 case ATA_IDLE: 293 case ATA_STANDBY: 294 //Note: There is lack of reference in spec of the error handling for 295 //READ_VERIFY command. 296 case ATA_READ_VERIFY_SECTORS: 297 sati_scsi_sense_data_construct( 298 sequence, 299 scsi_io, 300 SCSI_STATUS_CHECK_CONDITION, 301 SCSI_SENSE_ABORTED_COMMAND, 302 SCSI_ASC_COMMAND_SEQUENCE_ERROR, 303 SCSI_ASCQ_NO_ADDITIONAL_SENSE 304 ); 305 break; 306 307 case ATA_MEDIA_EJECT: 308 sati_scsi_sense_data_construct( 309 sequence, 310 scsi_io, 311 SCSI_STATUS_CHECK_CONDITION, 312 SCSI_SENSE_ABORTED_COMMAND, 313 SCSI_ASC_MEDIA_LOAD_OR_EJECT_FAILED, 314 SCSI_ASCQ_NO_ADDITIONAL_SENSE 315 ); 316 break; 317 318 default: 319 sati_scsi_sense_data_construct( 320 sequence, 321 scsi_io, 322 SCSI_STATUS_CHECK_CONDITION, 323 SCSI_SENSE_ILLEGAL_REQUEST, 324 SCSI_ASC_INVALID_FIELD_IN_CDB, 325 SCSI_ASCQ_INVALID_FIELD_IN_CDB 326 ); 327 break; 328 } 329 sequence->state = SATI_SEQUENCE_STATE_FINAL; 330 return SATI_FAILURE_CHECK_RESPONSE_DATA; 331 } 332 else 333 { 334 switch ( sequence->command_specific_data.translated_command ) 335 { 336 case ATA_READ_VERIFY_SECTORS: 337 338 sati_scsi_sense_data_construct( 339 sequence, 340 scsi_io, 341 SCSI_STATUS_GOOD, 342 SCSI_SENSE_NO_SENSE, 343 SCSI_ASC_NO_ADDITIONAL_SENSE, 344 SCSI_ASCQ_NO_ADDITIONAL_SENSE 345 ); 346 //device state is now operational(active) 347 sequence->device->state = SATI_DEVICE_STATE_OPERATIONAL; 348 sequence->state = SATI_SEQUENCE_STATE_FINAL; 349 break; 350 351 case ATA_IDLE_IMMED: 352 353 sati_scsi_sense_data_construct( 354 sequence, 355 scsi_io, 356 SCSI_STATUS_GOOD, 357 SCSI_SENSE_NO_SENSE, 358 SCSI_ASC_NO_ADDITIONAL_SENSE, 359 SCSI_ASCQ_NO_ADDITIONAL_SENSE 360 ); 361 sequence->device->state = SATI_DEVICE_STATE_IDLE; 362 sequence->state = SATI_SEQUENCE_STATE_FINAL; 363 break; 364 365 //These three commands will be issued when the power condition is 0x00 or 0x03 366 case ATA_MEDIA_EJECT: 367 case ATA_STANDBY: 368 case ATA_STANDBY_IMMED: 369 370 sati_scsi_sense_data_construct( 371 sequence, 372 scsi_io, 373 SCSI_STATUS_GOOD, 374 SCSI_SENSE_NO_SENSE, 375 SCSI_ASC_NO_ADDITIONAL_SENSE, 376 SCSI_ASCQ_NO_ADDITIONAL_SENSE 377 ); 378 379 if( SATI_START_STOP_UNIT_POWER_CONDITION(cdb) == 0 ) 380 { 381 sequence->device->state = SATI_DEVICE_STATE_STOPPED; 382 } 383 else 384 { 385 sequence->device->state = SATI_DEVICE_STATE_STANDBY; 386 } 387 sequence->state = SATI_SEQUENCE_STATE_FINAL; 388 break; 389 390 default: 391 //FLUSH Cache command does not require any success handling 392 break; 393 } 394 395 if (sequence->state == SATI_SEQUENCE_STATE_INCOMPLETE) 396 { 397 return SATI_SEQUENCE_INCOMPLETE; 398 } 399 } 400 return SATI_COMPLETE; 401 } 402 403 #endif // !defined(DISABLE_SATI_START_STOP_UNIT) 404 405