1 /*- 2 * Copyright (c) 2017 Broadcom. All rights reserved. 3 * The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions are met: 7 * 8 * 1. Redistributions of source code must retain the above copyright notice, 9 * this list of conditions and the following disclaimer. 10 * 11 * 2. Redistributions in binary form must reproduce the above copyright notice, 12 * this list of conditions and the following disclaimer in the documentation 13 * and/or other materials provided with the distribution. 14 * 15 * 3. Neither the name of the copyright holder nor the names of its contributors 16 * may be used to endorse or promote products derived from this software 17 * without specific prior written permission. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 20 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 23 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 * 31 * $FreeBSD$ 32 */ 33 34 /** 35 * @file 36 * FC transport API 37 * 38 */ 39 40 #include "ocs.h" 41 #include "ocs_device.h" 42 43 static void ocs_xport_link_stats_cb(int32_t status, uint32_t num_counters, ocs_hw_link_stat_counts_t *counters, void *arg); 44 static void ocs_xport_host_stats_cb(int32_t status, uint32_t num_counters, ocs_hw_host_stat_counts_t *counters, void *arg); 45 /** 46 * @brief Post node event callback argument. 47 */ 48 typedef struct { 49 ocs_sem_t sem; 50 ocs_node_t *node; 51 ocs_sm_event_t evt; 52 void *context; 53 } ocs_xport_post_node_event_t; 54 55 /** 56 * @brief Allocate a transport object. 57 * 58 * @par Description 59 * A transport object is allocated, and associated with a device instance. 60 * 61 * @param ocs Pointer to device instance. 62 * 63 * @return Returns the pointer to the allocated transport object, or NULL if failed. 64 */ 65 ocs_xport_t * 66 ocs_xport_alloc(ocs_t *ocs) 67 { 68 ocs_xport_t *xport; 69 70 ocs_assert(ocs, NULL); 71 xport = ocs_malloc(ocs, sizeof(*xport), OCS_M_ZERO); 72 if (xport != NULL) { 73 xport->ocs = ocs; 74 } 75 return xport; 76 } 77 78 /** 79 * @brief Create the RQ threads and the circular buffers used to pass sequences. 80 * 81 * @par Description 82 * Creates the circular buffers and the servicing threads for RQ processing. 83 * 84 * @param xport Pointer to transport object 85 * 86 * @return Returns 0 on success, or a non-zero value on failure. 87 */ 88 static void 89 ocs_xport_rq_threads_teardown(ocs_xport_t *xport) 90 { 91 ocs_t *ocs = xport->ocs; 92 uint32_t i; 93 94 if (xport->num_rq_threads == 0 || 95 xport->rq_thread_info == NULL) { 96 return; 97 } 98 99 /* Abort any threads */ 100 for (i = 0; i < xport->num_rq_threads; i++) { 101 if (xport->rq_thread_info[i].thread_started) { 102 ocs_thread_terminate(&xport->rq_thread_info[i].thread); 103 /* wait for the thread to exit */ 104 ocs_log_debug(ocs, "wait for thread %d to exit\n", i); 105 while (xport->rq_thread_info[i].thread_started) { 106 ocs_udelay(10000); 107 } 108 ocs_log_debug(ocs, "thread %d to exited\n", i); 109 } 110 if (xport->rq_thread_info[i].seq_cbuf != NULL) { 111 ocs_cbuf_free(xport->rq_thread_info[i].seq_cbuf); 112 xport->rq_thread_info[i].seq_cbuf = NULL; 113 } 114 } 115 } 116 117 /** 118 * @brief Create the RQ threads and the circular buffers used to pass sequences. 119 * 120 * @par Description 121 * Creates the circular buffers and the servicing threads for RQ processing. 122 * 123 * @param xport Pointer to transport object. 124 * @param num_rq_threads Number of RQ processing threads that the 125 * driver creates. 126 * 127 * @return Returns 0 on success, or a non-zero value on failure. 128 */ 129 static int32_t 130 ocs_xport_rq_threads_create(ocs_xport_t *xport, uint32_t num_rq_threads) 131 { 132 ocs_t *ocs = xport->ocs; 133 int32_t rc = 0; 134 uint32_t i; 135 136 xport->num_rq_threads = num_rq_threads; 137 ocs_log_debug(ocs, "number of RQ threads %d\n", num_rq_threads); 138 if (num_rq_threads == 0) { 139 return 0; 140 } 141 142 /* Allocate the space for the thread objects */ 143 xport->rq_thread_info = ocs_malloc(ocs, sizeof(ocs_xport_rq_thread_info_t) * num_rq_threads, OCS_M_ZERO); 144 if (xport->rq_thread_info == NULL) { 145 ocs_log_err(ocs, "memory allocation failure\n"); 146 return -1; 147 } 148 149 /* Create the circular buffers and threads. */ 150 for (i = 0; i < num_rq_threads; i++) { 151 xport->rq_thread_info[i].ocs = ocs; 152 xport->rq_thread_info[i].seq_cbuf = ocs_cbuf_alloc(ocs, OCS_HW_RQ_NUM_HDR); 153 if (xport->rq_thread_info[i].seq_cbuf == NULL) { 154 goto ocs_xport_rq_threads_create_error; 155 } 156 157 ocs_snprintf(xport->rq_thread_info[i].thread_name, 158 sizeof(xport->rq_thread_info[i].thread_name), 159 "ocs_unsol_rq:%d:%d", ocs->instance_index, i); 160 rc = ocs_thread_create(ocs, &xport->rq_thread_info[i].thread, ocs_unsol_rq_thread, 161 xport->rq_thread_info[i].thread_name, 162 &xport->rq_thread_info[i], OCS_THREAD_RUN); 163 if (rc) { 164 ocs_log_err(ocs, "ocs_thread_create failed: %d\n", rc); 165 goto ocs_xport_rq_threads_create_error; 166 } 167 xport->rq_thread_info[i].thread_started = TRUE; 168 } 169 return 0; 170 171 ocs_xport_rq_threads_create_error: 172 ocs_xport_rq_threads_teardown(xport); 173 return -1; 174 } 175 176 /** 177 * @brief Do as much allocation as possible, but do not initialization the device. 178 * 179 * @par Description 180 * Performs the functions required to get a device ready to run. 181 * 182 * @param xport Pointer to transport object. 183 * 184 * @return Returns 0 on success, or a non-zero value on failure. 185 */ 186 int32_t 187 ocs_xport_attach(ocs_xport_t *xport) 188 { 189 ocs_t *ocs = xport->ocs; 190 int32_t rc; 191 uint32_t max_sgl; 192 uint32_t n_sgl; 193 uint32_t i; 194 uint32_t value; 195 uint32_t max_remote_nodes; 196 197 /* booleans used for cleanup if initialization fails */ 198 uint8_t io_pool_created = FALSE; 199 uint8_t node_pool_created = FALSE; 200 201 ocs_list_init(&ocs->domain_list, ocs_domain_t, link); 202 203 for (i = 0; i < SLI4_MAX_FCFI; i++) { 204 xport->fcfi[i].hold_frames = 1; 205 ocs_lock_init(ocs, &xport->fcfi[i].pend_frames_lock, "xport pend_frames[%d]", i); 206 ocs_list_init(&xport->fcfi[i].pend_frames, ocs_hw_sequence_t, link); 207 } 208 209 rc = ocs_hw_set_ptr(&ocs->hw, OCS_HW_WAR_VERSION, ocs->hw_war_version); 210 if (rc) { 211 ocs_log_test(ocs, "can't set OCS_HW_WAR_VERSION\n"); 212 return -1; 213 } 214 215 rc = ocs_hw_setup(&ocs->hw, ocs, SLI4_PORT_TYPE_FC); 216 if (rc) { 217 ocs_log_err(ocs, "%s: Can't setup hardware\n", ocs->desc); 218 return -1; 219 } else if (ocs->ctrlmask & OCS_CTRLMASK_CRASH_RESET) { 220 ocs_log_debug(ocs, "stopping after ocs_hw_setup\n"); 221 return -1; 222 } 223 224 ocs_hw_set(&ocs->hw, OCS_HW_BOUNCE, ocs->hw_bounce); 225 ocs_log_debug(ocs, "HW bounce: %d\n", ocs->hw_bounce); 226 227 ocs_hw_set(&ocs->hw, OCS_HW_RQ_SELECTION_POLICY, ocs->rq_selection_policy); 228 ocs_hw_set(&ocs->hw, OCS_HW_RR_QUANTA, ocs->rr_quanta); 229 ocs_hw_get(&ocs->hw, OCS_HW_RQ_SELECTION_POLICY, &value); 230 ocs_log_debug(ocs, "RQ Selection Policy: %d\n", value); 231 232 ocs_hw_set_ptr(&ocs->hw, OCS_HW_FILTER_DEF, (void*) ocs->filter_def); 233 234 ocs_hw_get(&ocs->hw, OCS_HW_MAX_SGL, &max_sgl); 235 max_sgl -= SLI4_SGE_MAX_RESERVED; 236 n_sgl = MIN(OCS_FC_MAX_SGL, max_sgl); 237 238 /* EVT: For chained SGL testing */ 239 if (ocs->ctrlmask & OCS_CTRLMASK_TEST_CHAINED_SGLS) { 240 n_sgl = 4; 241 } 242 243 /* Note: number of SGLs must be set for ocs_node_create_pool */ 244 if (ocs_hw_set(&ocs->hw, OCS_HW_N_SGL, n_sgl) != OCS_HW_RTN_SUCCESS) { 245 ocs_log_err(ocs, "%s: Can't set number of SGLs\n", ocs->desc); 246 return -1; 247 } else { 248 ocs_log_debug(ocs, "%s: Configured for %d SGLs\n", ocs->desc, n_sgl); 249 } 250 251 ocs_hw_get(&ocs->hw, OCS_HW_MAX_NODES, &max_remote_nodes); 252 253 if (!ocs->max_remote_nodes) 254 ocs->max_remote_nodes = max_remote_nodes; 255 256 rc = ocs_node_create_pool(ocs, ocs->max_remote_nodes); 257 if (rc) { 258 ocs_log_err(ocs, "Can't allocate node pool\n"); 259 goto ocs_xport_attach_cleanup; 260 } else { 261 node_pool_created = TRUE; 262 } 263 264 /* EVT: if testing chained SGLs allocate OCS_FC_MAX_SGL SGE's in the IO */ 265 xport->io_pool = ocs_io_pool_create(ocs, ocs->num_scsi_ios, 266 (ocs->ctrlmask & OCS_CTRLMASK_TEST_CHAINED_SGLS) ? OCS_FC_MAX_SGL : n_sgl); 267 if (xport->io_pool == NULL) { 268 ocs_log_err(ocs, "Can't allocate IO pool\n"); 269 goto ocs_xport_attach_cleanup; 270 } else { 271 io_pool_created = TRUE; 272 } 273 274 /* 275 * setup the RQ processing threads 276 */ 277 if (ocs_xport_rq_threads_create(xport, ocs->rq_threads) != 0) { 278 ocs_log_err(ocs, "failure creating RQ threads\n"); 279 goto ocs_xport_attach_cleanup; 280 } 281 282 return 0; 283 284 ocs_xport_attach_cleanup: 285 if (io_pool_created) { 286 ocs_io_pool_free(xport->io_pool); 287 } 288 289 if (node_pool_created) { 290 ocs_node_free_pool(ocs); 291 } 292 293 return -1; 294 } 295 296 /** 297 * @brief Determines how to setup auto Xfer ready. 298 * 299 * @par Description 300 * @param xport Pointer to transport object. 301 * 302 * @return Returns 0 on success or a non-zero value on failure. 303 */ 304 static int32_t 305 ocs_xport_initialize_auto_xfer_ready(ocs_xport_t *xport) 306 { 307 ocs_t *ocs = xport->ocs; 308 uint32_t auto_xfer_rdy; 309 char prop_buf[32]; 310 uint32_t ramdisc_blocksize = 512; 311 uint8_t p_type = 0; 312 313 ocs_hw_get(&ocs->hw, OCS_HW_AUTO_XFER_RDY_CAPABLE, &auto_xfer_rdy); 314 if (!auto_xfer_rdy) { 315 ocs->auto_xfer_rdy_size = 0; 316 ocs_log_test(ocs, "Cannot enable auto xfer rdy for this port\n"); 317 return 0; 318 } 319 320 if (ocs_hw_set(&ocs->hw, OCS_HW_AUTO_XFER_RDY_SIZE, ocs->auto_xfer_rdy_size)) { 321 ocs_log_test(ocs, "%s: Can't set auto xfer rdy mode\n", ocs->desc); 322 return -1; 323 } 324 325 /* 326 * Determine if we are doing protection in the backend. We are looking 327 * at the modules parameters here. The backend cannot allow a format 328 * command to change the protection mode when using this feature, 329 * otherwise the firmware will not do the proper thing. 330 */ 331 if (ocs_get_property("p_type", prop_buf, sizeof(prop_buf)) == 0) { 332 p_type = ocs_strtoul(prop_buf, 0, 0); 333 } 334 if (ocs_get_property("ramdisc_blocksize", prop_buf, sizeof(prop_buf)) == 0) { 335 ramdisc_blocksize = ocs_strtoul(prop_buf, 0, 0); 336 } 337 if (ocs_get_property("external_dif", prop_buf, sizeof(prop_buf)) == 0) { 338 if(ocs_strlen(prop_buf)) { 339 if (p_type == 0) { 340 p_type = 1; 341 } 342 } 343 } 344 345 if (p_type != 0) { 346 if (ocs_hw_set(&ocs->hw, OCS_HW_AUTO_XFER_RDY_T10_ENABLE, TRUE)) { 347 ocs_log_test(ocs, "%s: Can't set auto xfer rdy mode\n", ocs->desc); 348 return -1; 349 } 350 if (ocs_hw_set(&ocs->hw, OCS_HW_AUTO_XFER_RDY_BLK_SIZE, ramdisc_blocksize)) { 351 ocs_log_test(ocs, "%s: Can't set auto xfer rdy blk size\n", ocs->desc); 352 return -1; 353 } 354 if (ocs_hw_set(&ocs->hw, OCS_HW_AUTO_XFER_RDY_P_TYPE, p_type)) { 355 ocs_log_test(ocs, "%s: Can't set auto xfer rdy mode\n", ocs->desc); 356 return -1; 357 } 358 if (ocs_hw_set(&ocs->hw, OCS_HW_AUTO_XFER_RDY_REF_TAG_IS_LBA, TRUE)) { 359 ocs_log_test(ocs, "%s: Can't set auto xfer rdy ref tag\n", ocs->desc); 360 return -1; 361 } 362 if (ocs_hw_set(&ocs->hw, OCS_HW_AUTO_XFER_RDY_APP_TAG_VALID, FALSE)) { 363 ocs_log_test(ocs, "%s: Can't set auto xfer rdy app tag valid\n", ocs->desc); 364 return -1; 365 } 366 } 367 ocs_log_debug(ocs, "Auto xfer rdy is enabled, p_type=%d, blksize=%d\n", 368 p_type, ramdisc_blocksize); 369 return 0; 370 } 371 372 /** 373 * @brief Initialize link topology config 374 * 375 * @par Description 376 * Topology can be fetched from mod-param or Persistet Topology(PT). 377 * a. Mod-param value is used when the value is 1(P2P) or 2(LOOP). 378 * a. PT is used if mod-param is not provided( i.e, default value of AUTO) 379 * Also, if mod-param is used, update PT. 380 * 381 * @param ocs Pointer to ocs 382 * 383 * @return Returns 0 on success, or a non-zero value on failure. 384 */ 385 static int 386 ocs_topology_setup(ocs_t *ocs) 387 { 388 uint32_t topology; 389 390 if (ocs->topology == OCS_HW_TOPOLOGY_AUTO) { 391 topology = ocs_hw_get_config_persistent_topology(&ocs->hw); 392 } else { 393 topology = ocs->topology; 394 /* ignore failure here. link will come-up either in auto mode 395 * if PT is not supported or last saved PT value */ 396 ocs_hw_set_persistent_topology(&ocs->hw, topology, OCS_CMD_POLL); 397 } 398 399 return ocs_hw_set(&ocs->hw, OCS_HW_TOPOLOGY, topology); 400 } 401 402 /** 403 * @brief Initializes the device. 404 * 405 * @par Description 406 * Performs the functions required to make a device functional. 407 * 408 * @param xport Pointer to transport object. 409 * 410 * @return Returns 0 on success, or a non-zero value on failure. 411 */ 412 int32_t 413 ocs_xport_initialize(ocs_xport_t *xport) 414 { 415 ocs_t *ocs = xport->ocs; 416 int32_t rc; 417 uint32_t i; 418 uint32_t max_hw_io; 419 uint32_t max_sgl; 420 uint32_t hlm; 421 uint32_t rq_limit; 422 uint32_t dif_capable; 423 uint8_t dif_separate = 0; 424 char prop_buf[32]; 425 426 /* booleans used for cleanup if initialization fails */ 427 uint8_t ini_device_set = FALSE; 428 uint8_t tgt_device_set = FALSE; 429 uint8_t hw_initialized = FALSE; 430 431 ocs_hw_get(&ocs->hw, OCS_HW_MAX_IO, &max_hw_io); 432 if (ocs_hw_set(&ocs->hw, OCS_HW_N_IO, max_hw_io) != OCS_HW_RTN_SUCCESS) { 433 ocs_log_err(ocs, "%s: Can't set number of IOs\n", ocs->desc); 434 return -1; 435 } 436 437 ocs_hw_get(&ocs->hw, OCS_HW_MAX_SGL, &max_sgl); 438 max_sgl -= SLI4_SGE_MAX_RESERVED; 439 440 if (ocs->enable_hlm) { 441 ocs_hw_get(&ocs->hw, OCS_HW_HIGH_LOGIN_MODE, &hlm); 442 if (!hlm) { 443 ocs->enable_hlm = FALSE; 444 ocs_log_err(ocs, "Cannot enable high login mode for this port\n"); 445 } else { 446 ocs_log_debug(ocs, "High login mode is enabled\n"); 447 if (ocs_hw_set(&ocs->hw, OCS_HW_HIGH_LOGIN_MODE, TRUE)) { 448 ocs_log_err(ocs, "%s: Can't set high login mode\n", ocs->desc); 449 return -1; 450 } 451 } 452 } 453 454 /* validate the auto xfer_rdy size */ 455 if (ocs->auto_xfer_rdy_size > 0 && 456 (ocs->auto_xfer_rdy_size < 2048 || 457 ocs->auto_xfer_rdy_size > 65536)) { 458 ocs_log_err(ocs, "Auto XFER_RDY size is out of range (2K-64K)\n"); 459 return -1; 460 } 461 462 ocs_hw_get(&ocs->hw, OCS_HW_MAX_IO, &max_hw_io); 463 464 if (ocs->auto_xfer_rdy_size > 0) { 465 if (ocs_xport_initialize_auto_xfer_ready(xport)) { 466 ocs_log_err(ocs, "%s: Failed auto xfer ready setup\n", ocs->desc); 467 return -1; 468 } 469 if (ocs->esoc){ 470 ocs_hw_set(&ocs->hw, OCS_ESOC, TRUE); 471 } 472 } 473 474 if (ocs->explicit_buffer_list) { 475 /* Are pre-registered SGL's required? */ 476 ocs_hw_get(&ocs->hw, OCS_HW_PREREGISTER_SGL, &i); 477 if (i == TRUE) { 478 ocs_log_err(ocs, "Explicit Buffer List not supported on this device, not enabled\n"); 479 } else { 480 ocs_hw_set(&ocs->hw, OCS_HW_PREREGISTER_SGL, FALSE); 481 } 482 } 483 484 /* Setup persistent topology based on topology mod-param value */ 485 rc = ocs_topology_setup(ocs); 486 if (rc) { 487 ocs_log_err(ocs, "%s: Can't set the toplogy\n", ocs->desc); 488 return -1; 489 } 490 491 if (ocs_hw_set(&ocs->hw, OCS_HW_TOPOLOGY, ocs->topology) != OCS_HW_RTN_SUCCESS) { 492 ocs_log_err(ocs, "%s: Can't set the toplogy\n", ocs->desc); 493 return -1; 494 } 495 ocs_hw_set(&ocs->hw, OCS_HW_RQ_DEFAULT_BUFFER_SIZE, OCS_FC_RQ_SIZE_DEFAULT); 496 497 if (ocs_hw_set(&ocs->hw, OCS_HW_LINK_SPEED, ocs->speed) != OCS_HW_RTN_SUCCESS) { 498 ocs_log_err(ocs, "%s: Can't set the link speed\n", ocs->desc); 499 return -1; 500 } 501 502 if (ocs_hw_set(&ocs->hw, OCS_HW_ETH_LICENSE, ocs->ethernet_license) != OCS_HW_RTN_SUCCESS) { 503 ocs_log_err(ocs, "%s: Can't set the ethernet license\n", ocs->desc); 504 return -1; 505 } 506 507 /* currently only lancer support setting the CRC seed value */ 508 if (ocs->hw.sli.asic_type == SLI4_ASIC_TYPE_LANCER) { 509 if (ocs_hw_set(&ocs->hw, OCS_HW_DIF_SEED, OCS_FC_DIF_SEED) != OCS_HW_RTN_SUCCESS) { 510 ocs_log_err(ocs, "%s: Can't set the DIF seed\n", ocs->desc); 511 return -1; 512 } 513 } 514 515 /* Set the Dif mode */ 516 if (0 == ocs_hw_get(&ocs->hw, OCS_HW_DIF_CAPABLE, &dif_capable)) { 517 if (dif_capable) { 518 if (ocs_get_property("dif_separate", prop_buf, sizeof(prop_buf)) == 0) { 519 dif_separate = ocs_strtoul(prop_buf, 0, 0); 520 } 521 522 if ((rc = ocs_hw_set(&ocs->hw, OCS_HW_DIF_MODE, 523 (dif_separate == 0 ? OCS_HW_DIF_MODE_INLINE : OCS_HW_DIF_MODE_SEPARATE)))) { 524 ocs_log_err(ocs, "Requested DIF MODE not supported\n"); 525 } 526 } 527 } 528 529 if (ocs->target_io_timer_sec) { 530 ocs_log_debug(ocs, "setting target io timer=%d\n", ocs->target_io_timer_sec); 531 ocs_hw_set(&ocs->hw, OCS_HW_EMULATE_TARGET_WQE_TIMEOUT, TRUE); 532 } 533 534 ocs_hw_callback(&ocs->hw, OCS_HW_CB_DOMAIN, ocs_domain_cb, ocs); 535 ocs_hw_callback(&ocs->hw, OCS_HW_CB_REMOTE_NODE, ocs_remote_node_cb, ocs); 536 ocs_hw_callback(&ocs->hw, OCS_HW_CB_UNSOLICITED, ocs_unsolicited_cb, ocs); 537 ocs_hw_callback(&ocs->hw, OCS_HW_CB_PORT, ocs_port_cb, ocs); 538 539 ocs->fw_version = (const char*) ocs_hw_get_ptr(&ocs->hw, OCS_HW_FW_REV); 540 541 /* Initialize vport list */ 542 ocs_list_init(&xport->vport_list, ocs_vport_spec_t, link); 543 ocs_lock_init(ocs, &xport->io_pending_lock, "io_pending_lock[%d]", ocs->instance_index); 544 ocs_list_init(&xport->io_pending_list, ocs_io_t, io_pending_link); 545 ocs_atomic_init(&xport->io_active_count, 0); 546 ocs_atomic_init(&xport->io_pending_count, 0); 547 ocs_atomic_init(&xport->io_total_free, 0); 548 ocs_atomic_init(&xport->io_total_pending, 0); 549 ocs_atomic_init(&xport->io_alloc_failed_count, 0); 550 ocs_atomic_init(&xport->io_pending_recursing, 0); 551 ocs_lock_init(ocs, &ocs->hw.watchdog_lock, " Watchdog Lock[%d]", ocs_instance(ocs)); 552 rc = ocs_hw_init(&ocs->hw); 553 if (rc) { 554 ocs_log_err(ocs, "ocs_hw_init failure\n"); 555 goto ocs_xport_init_cleanup; 556 } else { 557 hw_initialized = TRUE; 558 } 559 560 rq_limit = max_hw_io/2; 561 if (ocs_hw_set(&ocs->hw, OCS_HW_RQ_PROCESS_LIMIT, rq_limit) != OCS_HW_RTN_SUCCESS) { 562 ocs_log_err(ocs, "%s: Can't set the RQ process limit\n", ocs->desc); 563 } 564 565 if (ocs->config_tgt) { 566 rc = ocs_scsi_tgt_new_device(ocs); 567 if (rc) { 568 ocs_log_err(ocs, "failed to initialize target\n"); 569 goto ocs_xport_init_cleanup; 570 } else { 571 tgt_device_set = TRUE; 572 } 573 } 574 575 if (ocs->enable_ini) { 576 rc = ocs_scsi_ini_new_device(ocs); 577 if (rc) { 578 ocs_log_err(ocs, "failed to initialize initiator\n"); 579 goto ocs_xport_init_cleanup; 580 } else { 581 ini_device_set = TRUE; 582 } 583 } 584 585 /* Add vports */ 586 if (ocs->num_vports != 0) { 587 uint32_t max_vports; 588 ocs_hw_get(&ocs->hw, OCS_HW_MAX_VPORTS, &max_vports); 589 590 if (ocs->num_vports < max_vports) { 591 ocs_log_debug(ocs, "Provisioning %d vports\n", ocs->num_vports); 592 for (i = 0; i < ocs->num_vports; i++) { 593 ocs_vport_create_spec(ocs, 0, 0, UINT32_MAX, ocs->enable_ini, ocs->enable_tgt, NULL, NULL); 594 } 595 } else { 596 ocs_log_err(ocs, "failed to create vports. num_vports range should be (1-%d) \n", max_vports-1); 597 goto ocs_xport_init_cleanup; 598 } 599 } 600 601 return 0; 602 603 ocs_xport_init_cleanup: 604 if (ini_device_set) { 605 ocs_scsi_ini_del_device(ocs); 606 } 607 608 if (tgt_device_set) { 609 ocs_scsi_tgt_del_device(ocs); 610 } 611 612 if (hw_initialized) { 613 /* ocs_hw_teardown can only execute after ocs_hw_init */ 614 ocs_hw_teardown(&ocs->hw); 615 } 616 617 return -1; 618 } 619 620 /** 621 * @brief Detaches the transport from the device. 622 * 623 * @par Description 624 * Performs the functions required to shut down a device. 625 * 626 * @param xport Pointer to transport object. 627 * 628 * @return Returns 0 on success or a non-zero value on failure. 629 */ 630 int32_t 631 ocs_xport_detach(ocs_xport_t *xport) 632 { 633 ocs_t *ocs = xport->ocs; 634 635 /* free resources associated with target-server and initiator-client */ 636 if (ocs->config_tgt) 637 ocs_scsi_tgt_del_device(ocs); 638 639 if (ocs->enable_ini) { 640 ocs_scsi_ini_del_device(ocs); 641 642 /*Shutdown FC Statistics timer*/ 643 if (ocs_timer_pending(&ocs->xport->stats_timer)) 644 ocs_del_timer(&ocs->xport->stats_timer); 645 } 646 647 ocs_hw_teardown(&ocs->hw); 648 649 return 0; 650 } 651 652 /** 653 * @brief domain list empty callback 654 * 655 * @par Description 656 * Function is invoked when the device domain list goes empty. By convention 657 * @c arg points to an ocs_sem_t instance, that is incremented. 658 * 659 * @param ocs Pointer to device object. 660 * @param arg Pointer to semaphore instance. 661 * 662 * @return None. 663 */ 664 665 static void 666 ocs_xport_domain_list_empty_cb(ocs_t *ocs, void *arg) 667 { 668 ocs_sem_t *sem = arg; 669 670 ocs_assert(ocs); 671 ocs_assert(sem); 672 673 ocs_sem_v(sem); 674 } 675 676 /** 677 * @brief post node event callback 678 * 679 * @par Description 680 * This function is called from the mailbox completion interrupt context to post an 681 * event to a node object. By doing this in the interrupt context, it has 682 * the benefit of only posting events in the interrupt context, deferring the need to 683 * create a per event node lock. 684 * 685 * @param hw Pointer to HW structure. 686 * @param status Completion status for mailbox command. 687 * @param mqe Mailbox queue completion entry. 688 * @param arg Callback argument. 689 * 690 * @return Returns 0 on success, a negative error code value on failure. 691 */ 692 693 static int32_t 694 ocs_xport_post_node_event_cb(ocs_hw_t *hw, int32_t status, uint8_t *mqe, void *arg) 695 { 696 ocs_xport_post_node_event_t *payload = arg; 697 698 if (payload != NULL) { 699 ocs_node_post_event(payload->node, payload->evt, payload->context); 700 ocs_sem_v(&payload->sem); 701 } 702 703 return 0; 704 } 705 706 /** 707 * @brief Initiate force free. 708 * 709 * @par Description 710 * Perform force free of OCS. 711 * 712 * @param xport Pointer to transport object. 713 * 714 * @return None. 715 */ 716 717 static void 718 ocs_xport_force_free(ocs_xport_t *xport) 719 { 720 ocs_t *ocs = xport->ocs; 721 ocs_domain_t *domain; 722 ocs_domain_t *next; 723 724 ocs_log_debug(ocs, "reset required, do force shutdown\n"); 725 ocs_device_lock(ocs); 726 ocs_list_foreach_safe(&ocs->domain_list, domain, next) { 727 ocs_domain_force_free(domain); 728 } 729 ocs_device_unlock(ocs); 730 } 731 732 /** 733 * @brief Perform transport attach function. 734 * 735 * @par Description 736 * Perform the attach function, which for the FC transport makes a HW call 737 * to bring up the link. 738 * 739 * @param xport pointer to transport object. 740 * @param cmd command to execute. 741 * 742 * ocs_xport_control(ocs_xport_t *xport, OCS_XPORT_PORT_ONLINE) 743 * ocs_xport_control(ocs_xport_t *xport, OCS_XPORT_PORT_OFFLINE) 744 * ocs_xport_control(ocs_xport_t *xport, OCS_XPORT_PORT_SHUTDOWN) 745 * ocs_xport_control(ocs_xport_t *xport, OCS_XPORT_POST_NODE_EVENT, ocs_node_t *node, ocs_sm_event_t, void *context) 746 * 747 * @return Returns 0 on success, or a negative error code value on failure. 748 */ 749 750 int32_t 751 ocs_xport_control(ocs_xport_t *xport, ocs_xport_ctrl_e cmd, ...) 752 { 753 uint32_t rc = 0; 754 ocs_t *ocs = NULL; 755 va_list argp; 756 757 ocs_assert(xport, -1); 758 ocs_assert(xport->ocs, -1); 759 ocs = xport->ocs; 760 761 switch (cmd) { 762 case OCS_XPORT_PORT_ONLINE: { 763 /* Bring the port on-line */ 764 rc = ocs_hw_port_control(&ocs->hw, OCS_HW_PORT_INIT, 0, NULL, NULL); 765 if (rc) { 766 ocs_log_err(ocs, "%s: Can't init port\n", ocs->desc); 767 } else { 768 xport->configured_link_state = cmd; 769 } 770 break; 771 } 772 case OCS_XPORT_PORT_OFFLINE: { 773 if (ocs_hw_port_control(&ocs->hw, OCS_HW_PORT_SHUTDOWN, 0, NULL, NULL)) { 774 ocs_log_err(ocs, "port shutdown failed\n"); 775 } else { 776 xport->configured_link_state = cmd; 777 } 778 break; 779 } 780 781 case OCS_XPORT_SHUTDOWN: { 782 ocs_sem_t sem; 783 uint32_t reset_required; 784 785 /* if a PHYSDEV reset was performed (e.g. hw dump), will affect 786 * all PCI functions; orderly shutdown won't work, just force free 787 */ 788 /* TODO: need to poll this regularly... */ 789 if (ocs_hw_get(&ocs->hw, OCS_HW_RESET_REQUIRED, &reset_required) != OCS_HW_RTN_SUCCESS) { 790 reset_required = 0; 791 } 792 793 if (reset_required) { 794 ocs_log_debug(ocs, "reset required, do force shutdown\n"); 795 ocs_xport_force_free(xport); 796 break; 797 } 798 ocs_sem_init(&sem, 0, "domain_list_sem"); 799 ocs_register_domain_list_empty_cb(ocs, ocs_xport_domain_list_empty_cb, &sem); 800 801 if (ocs_hw_port_control(&ocs->hw, OCS_HW_PORT_SHUTDOWN, 0, NULL, NULL)) { 802 ocs_log_debug(ocs, "port shutdown failed, do force shutdown\n"); 803 ocs_xport_force_free(xport); 804 } else { 805 ocs_log_debug(ocs, "Waiting %d seconds for domain shutdown.\n", (OCS_FC_DOMAIN_SHUTDOWN_TIMEOUT_USEC/1000000)); 806 807 rc = ocs_sem_p(&sem, OCS_FC_DOMAIN_SHUTDOWN_TIMEOUT_USEC); 808 if (rc) { 809 ocs_log_debug(ocs, "Note: Domain shutdown timed out\n"); 810 ocs_xport_force_free(xport); 811 } 812 } 813 814 ocs_register_domain_list_empty_cb(ocs, NULL, NULL); 815 816 /* Free up any saved virtual ports */ 817 ocs_vport_del_all(ocs); 818 break; 819 } 820 821 /* 822 * POST_NODE_EVENT: post an event to a node object 823 * 824 * This transport function is used to post an event to a node object. It does 825 * this by submitting a NOP mailbox command to defer execution to the 826 * interrupt context (thereby enforcing the serialized execution of event posting 827 * to the node state machine instances) 828 * 829 * A counting semaphore is used to make the call synchronous (we wait until 830 * the callback increments the semaphore before returning (or times out) 831 */ 832 case OCS_XPORT_POST_NODE_EVENT: { 833 ocs_node_t *node; 834 ocs_sm_event_t evt; 835 void *context; 836 ocs_xport_post_node_event_t payload; 837 ocs_t *ocs; 838 ocs_hw_t *hw; 839 840 /* Retrieve arguments */ 841 va_start(argp, cmd); 842 node = va_arg(argp, ocs_node_t*); 843 evt = va_arg(argp, ocs_sm_event_t); 844 context = va_arg(argp, void *); 845 va_end(argp); 846 847 ocs_assert(node, -1); 848 ocs_assert(node->ocs, -1); 849 850 ocs = node->ocs; 851 hw = &ocs->hw; 852 853 /* if node's state machine is disabled, don't bother continuing */ 854 if (!node->sm.current_state) { 855 ocs_log_test(ocs, "node %p state machine disabled\n", node); 856 return -1; 857 } 858 859 /* Setup payload */ 860 ocs_memset(&payload, 0, sizeof(payload)); 861 ocs_sem_init(&payload.sem, 0, "xport_post_node_Event"); 862 payload.node = node; 863 payload.evt = evt; 864 payload.context = context; 865 866 if (ocs_hw_async_call(hw, ocs_xport_post_node_event_cb, &payload)) { 867 ocs_log_test(ocs, "ocs_hw_async_call failed\n"); 868 rc = -1; 869 break; 870 } 871 872 /* Wait for completion */ 873 if (ocs_sem_p(&payload.sem, OCS_SEM_FOREVER)) { 874 ocs_log_test(ocs, "POST_NODE_EVENT: sem wait failed\n"); 875 rc = -1; 876 } 877 878 break; 879 } 880 /* 881 * Set wwnn for the port. This will be used instead of the default provided by FW. 882 */ 883 case OCS_XPORT_WWNN_SET: { 884 uint64_t wwnn; 885 886 /* Retrieve arguments */ 887 va_start(argp, cmd); 888 wwnn = va_arg(argp, uint64_t); 889 va_end(argp); 890 891 ocs_log_debug(ocs, " WWNN %016" PRIx64 "\n", wwnn); 892 xport->req_wwnn = wwnn; 893 894 break; 895 } 896 /* 897 * Set wwpn for the port. This will be used instead of the default provided by FW. 898 */ 899 case OCS_XPORT_WWPN_SET: { 900 uint64_t wwpn; 901 902 /* Retrieve arguments */ 903 va_start(argp, cmd); 904 wwpn = va_arg(argp, uint64_t); 905 va_end(argp); 906 907 ocs_log_debug(ocs, " WWPN %016" PRIx64 "\n", wwpn); 908 xport->req_wwpn = wwpn; 909 910 break; 911 } 912 913 default: 914 break; 915 } 916 return rc; 917 } 918 919 /** 920 * @brief Return status on a link. 921 * 922 * @par Description 923 * Returns status information about a link. 924 * 925 * @param xport Pointer to transport object. 926 * @param cmd Command to execute. 927 * @param result Pointer to result value. 928 * 929 * ocs_xport_status(ocs_xport_t *xport, OCS_XPORT_PORT_STATUS) 930 * ocs_xport_status(ocs_xport_t *xport, OCS_XPORT_LINK_SPEED, ocs_xport_stats_t *result) 931 * return link speed in MB/sec 932 * ocs_xport_status(ocs_xport_t *xport, OCS_XPORT_IS_SUPPORTED_LINK_SPEED, ocs_xport_stats_t *result) 933 * [in] *result is speed to check in MB/s 934 * returns 1 if supported, 0 if not 935 * ocs_xport_status(ocs_xport_t *xport, OCS_XPORT_LINK_STATISTICS, ocs_xport_stats_t *result) 936 * return link/host port stats 937 * ocs_xport_status(ocs_xport_t *xport, OCS_XPORT_LINK_STAT_RESET, ocs_xport_stats_t *result) 938 * resets link/host stats 939 * 940 * 941 * @return Returns 0 on success, or a negative error code value on failure. 942 */ 943 944 int32_t 945 ocs_xport_status(ocs_xport_t *xport, ocs_xport_status_e cmd, ocs_xport_stats_t *result) 946 { 947 uint32_t rc = 0; 948 ocs_t *ocs = NULL; 949 ocs_xport_stats_t value; 950 ocs_hw_rtn_e hw_rc; 951 952 ocs_assert(xport, -1); 953 ocs_assert(xport->ocs, -1); 954 955 ocs = xport->ocs; 956 957 switch (cmd) { 958 case OCS_XPORT_CONFIG_PORT_STATUS: 959 ocs_assert(result, -1); 960 if (xport->configured_link_state == 0) { 961 /* Initial state is offline. configured_link_state is */ 962 /* set to online explicitly when port is brought online. */ 963 xport->configured_link_state = OCS_XPORT_PORT_OFFLINE; 964 } 965 result->value = xport->configured_link_state; 966 break; 967 968 case OCS_XPORT_PORT_STATUS: 969 ocs_assert(result, -1); 970 /* Determine port status based on link speed. */ 971 hw_rc = ocs_hw_get(&(ocs->hw), OCS_HW_LINK_SPEED, &value.value); 972 if (hw_rc == OCS_HW_RTN_SUCCESS) { 973 if (value.value == 0) { 974 result->value = 0; 975 } else { 976 result->value = 1; 977 } 978 rc = 0; 979 } else { 980 rc = -1; 981 } 982 break; 983 984 case OCS_XPORT_LINK_SPEED: { 985 uint32_t speed; 986 987 ocs_assert(result, -1); 988 result->value = 0; 989 990 rc = ocs_hw_get(&ocs->hw, OCS_HW_LINK_SPEED, &speed); 991 if (rc == 0) { 992 result->value = speed; 993 } 994 break; 995 } 996 997 case OCS_XPORT_IS_SUPPORTED_LINK_SPEED: { 998 uint32_t speed; 999 uint32_t link_module_type; 1000 1001 ocs_assert(result, -1); 1002 speed = result->value; 1003 1004 rc = ocs_hw_get(&ocs->hw, OCS_HW_LINK_MODULE_TYPE, &link_module_type); 1005 if (rc == 0) { 1006 switch(speed) { 1007 case 1000: rc = (link_module_type & OCS_HW_LINK_MODULE_TYPE_1GB) != 0; break; 1008 case 2000: rc = (link_module_type & OCS_HW_LINK_MODULE_TYPE_2GB) != 0; break; 1009 case 4000: rc = (link_module_type & OCS_HW_LINK_MODULE_TYPE_4GB) != 0; break; 1010 case 8000: rc = (link_module_type & OCS_HW_LINK_MODULE_TYPE_8GB) != 0; break; 1011 case 10000: rc = (link_module_type & OCS_HW_LINK_MODULE_TYPE_10GB) != 0; break; 1012 case 16000: rc = (link_module_type & OCS_HW_LINK_MODULE_TYPE_16GB) != 0; break; 1013 case 32000: rc = (link_module_type & OCS_HW_LINK_MODULE_TYPE_32GB) != 0; break; 1014 default: rc = 0; break; 1015 } 1016 } else { 1017 rc = 0; 1018 } 1019 break; 1020 } 1021 case OCS_XPORT_LINK_STATISTICS: 1022 ocs_device_lock(ocs); 1023 ocs_memcpy((void *)result, &ocs->xport->fc_xport_stats, sizeof(ocs_xport_stats_t)); 1024 ocs_device_unlock(ocs); 1025 break; 1026 case OCS_XPORT_LINK_STAT_RESET: { 1027 /* Create a semaphore to synchronize the stat reset process. */ 1028 ocs_sem_init(&(result->stats.semaphore), 0, "fc_stats_reset"); 1029 1030 /* First reset the link stats */ 1031 if ((rc = ocs_hw_get_link_stats(&ocs->hw, 0, 1, 1, ocs_xport_link_stats_cb, result)) != 0) { 1032 ocs_log_err(ocs, "%s: Failed to reset link statistics\n", __func__); 1033 break; 1034 } 1035 1036 /* Wait for semaphore to be signaled when the command completes */ 1037 /* TODO: Should there be a timeout on this? If so, how long? */ 1038 if (ocs_sem_p(&(result->stats.semaphore), OCS_SEM_FOREVER) != 0) { 1039 /* Undefined failure */ 1040 ocs_log_test(ocs, "ocs_sem_p failed\n"); 1041 rc = -ENXIO; 1042 break; 1043 } 1044 1045 /* Next reset the host stats */ 1046 if ((rc = ocs_hw_get_host_stats(&ocs->hw, 1, ocs_xport_host_stats_cb, result)) != 0) { 1047 ocs_log_err(ocs, "%s: Failed to reset host statistics\n", __func__); 1048 break; 1049 } 1050 1051 /* Wait for semaphore to be signaled when the command completes */ 1052 if (ocs_sem_p(&(result->stats.semaphore), OCS_SEM_FOREVER) != 0) { 1053 /* Undefined failure */ 1054 ocs_log_test(ocs, "ocs_sem_p failed\n"); 1055 rc = -ENXIO; 1056 break; 1057 } 1058 break; 1059 } 1060 case OCS_XPORT_IS_QUIESCED: 1061 ocs_device_lock(ocs); 1062 result->value = ocs_list_empty(&ocs->domain_list); 1063 ocs_device_unlock(ocs); 1064 break; 1065 default: 1066 rc = -1; 1067 break; 1068 } 1069 1070 return rc; 1071 1072 } 1073 1074 static void 1075 ocs_xport_link_stats_cb(int32_t status, uint32_t num_counters, ocs_hw_link_stat_counts_t *counters, void *arg) 1076 { 1077 ocs_xport_stats_t *result = arg; 1078 1079 result->stats.link_stats.link_failure_error_count = counters[OCS_HW_LINK_STAT_LINK_FAILURE_COUNT].counter; 1080 result->stats.link_stats.loss_of_sync_error_count = counters[OCS_HW_LINK_STAT_LOSS_OF_SYNC_COUNT].counter; 1081 result->stats.link_stats.primitive_sequence_error_count = counters[OCS_HW_LINK_STAT_PRIMITIVE_SEQ_COUNT].counter; 1082 result->stats.link_stats.invalid_transmission_word_error_count = counters[OCS_HW_LINK_STAT_INVALID_XMIT_WORD_COUNT].counter; 1083 result->stats.link_stats.crc_error_count = counters[OCS_HW_LINK_STAT_CRC_COUNT].counter; 1084 1085 ocs_sem_v(&(result->stats.semaphore)); 1086 } 1087 1088 static void 1089 ocs_xport_host_stats_cb(int32_t status, uint32_t num_counters, ocs_hw_host_stat_counts_t *counters, void *arg) 1090 { 1091 ocs_xport_stats_t *result = arg; 1092 1093 result->stats.host_stats.transmit_kbyte_count = counters[OCS_HW_HOST_STAT_TX_KBYTE_COUNT].counter; 1094 result->stats.host_stats.receive_kbyte_count = counters[OCS_HW_HOST_STAT_RX_KBYTE_COUNT].counter; 1095 result->stats.host_stats.transmit_frame_count = counters[OCS_HW_HOST_STAT_TX_FRAME_COUNT].counter; 1096 result->stats.host_stats.receive_frame_count = counters[OCS_HW_HOST_STAT_RX_FRAME_COUNT].counter; 1097 1098 ocs_sem_v(&(result->stats.semaphore)); 1099 } 1100 1101 /** 1102 * @brief Free a transport object. 1103 * 1104 * @par Description 1105 * The transport object is freed. 1106 * 1107 * @param xport Pointer to transport object. 1108 * 1109 * @return None. 1110 */ 1111 1112 void 1113 ocs_xport_free(ocs_xport_t *xport) 1114 { 1115 ocs_t *ocs; 1116 uint32_t i; 1117 1118 if (xport) { 1119 ocs = xport->ocs; 1120 ocs_io_pool_free(xport->io_pool); 1121 ocs_node_free_pool(ocs); 1122 if(mtx_initialized(&xport->io_pending_lock.lock)) 1123 ocs_lock_free(&xport->io_pending_lock); 1124 1125 for (i = 0; i < SLI4_MAX_FCFI; i++) { 1126 ocs_lock_free(&xport->fcfi[i].pend_frames_lock); 1127 } 1128 1129 ocs_xport_rq_threads_teardown(xport); 1130 1131 ocs_free(ocs, xport, sizeof(*xport)); 1132 } 1133 } 1134