1 /*- 2 * Copyright (c) 1997, 1998, 1999 Nicolas Souchu 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 * $FreeBSD$ 27 * 28 */ 29 #ifndef __PPBCONF_H 30 #define __PPBCONF_H 31 32 #include <sys/queue.h> 33 34 /* 35 * Parallel Port Bus sleep/wakeup queue. 36 */ 37 #define PPBPRI (PZERO+8) 38 39 /* 40 * Parallel Port Chipset mode masks. 41 * NIBBLE mode is supposed to be available under each other modes. 42 */ 43 #define PPB_COMPATIBLE 0x0 /* Centronics compatible mode */ 44 45 #define PPB_NIBBLE 0x1 /* reverse 4 bit mode */ 46 #define PPB_PS2 0x2 /* PS/2 byte mode */ 47 #define PPB_EPP 0x4 /* EPP mode, 32 bit */ 48 #define PPB_ECP 0x8 /* ECP mode */ 49 50 /* mode aliases */ 51 #define PPB_SPP PPB_NIBBLE|PPB_PS2 52 #define PPB_BYTE PPB_PS2 53 54 #define PPB_MASK 0x0f 55 #define PPB_OPTIONS_MASK 0xf0 56 57 #define PPB_IS_EPP(mode) (mode & PPB_EPP) 58 #define PPB_IN_EPP_MODE(bus) (PPB_IS_EPP (ppb_get_mode (bus))) 59 #define PPB_IN_NIBBLE_MODE(bus) (ppb_get_mode (bus) & PPB_NIBBLE) 60 #define PPB_IN_PS2_MODE(bus) (ppb_get_mode (bus) & PPB_PS2) 61 62 #define n(flags) (~(flags) & (flags)) 63 64 /* 65 * Parallel Port Chipset control bits. 66 */ 67 #define STROBE 0x01 68 #define AUTOFEED 0x02 69 #define nINIT 0x04 70 #define SELECTIN 0x08 71 #define IRQENABLE 0x10 72 #define PCD 0x20 73 74 #define nSTROBE n(STROBE) 75 #define nAUTOFEED n(AUTOFEED) 76 #define INIT n(nINIT) 77 #define nSELECTIN n(SELECTIN) 78 #define nPCD n(PCD) 79 80 /* 81 * Parallel Port Chipset status bits. 82 */ 83 #define TIMEOUT 0x01 84 #define nFAULT 0x08 85 #define SELECT 0x10 86 #define PERROR 0x20 87 #define nACK 0x40 88 #define nBUSY 0x80 89 90 /* 91 * Structure to store status information. 92 */ 93 struct ppb_status { 94 unsigned char status; 95 96 unsigned int timeout:1; 97 unsigned int error:1; 98 unsigned int select:1; 99 unsigned int paper_end:1; 100 unsigned int ack:1; 101 unsigned int busy:1; 102 }; 103 104 /* Parallel port bus I/O opcodes */ 105 #define PPB_OUTSB_EPP 1 106 #define PPB_OUTSW_EPP 2 107 #define PPB_OUTSL_EPP 3 108 #define PPB_INSB_EPP 4 109 #define PPB_INSW_EPP 5 110 #define PPB_INSL_EPP 6 111 #define PPB_RDTR 7 112 #define PPB_RSTR 8 113 #define PPB_RCTR 9 114 #define PPB_REPP_A 10 115 #define PPB_REPP_D 11 116 #define PPB_RECR 12 117 #define PPB_RFIFO 13 118 #define PPB_WDTR 14 119 #define PPB_WSTR 15 120 #define PPB_WCTR 16 121 #define PPB_WEPP_A 17 122 #define PPB_WEPP_D 18 123 #define PPB_WECR 19 124 #define PPB_WFIFO 20 125 126 /* 127 * How tsleep() is called in ppb_request_bus(). 128 */ 129 #define PPB_DONTWAIT 0 130 #define PPB_NOINTR 0 131 #define PPB_WAIT 0x1 132 #define PPB_INTR 0x2 133 #define PPB_POLL 0x4 134 #define PPB_FOREVER -1 135 136 /* 137 * Microsequence stuff. 138 */ 139 #define PPB_MS_MAXLEN 64 /* XXX according to MS_INS_MASK */ 140 #define PPB_MS_MAXARGS 3 /* according to MS_ARG_MASK */ 141 142 /* maximum number of mode dependent 143 * submicrosequences for in/out operations 144 */ 145 #define PPB_MAX_XFER 6 146 147 union ppb_insarg { 148 int i; 149 void *p; 150 char *c; 151 int (* f)(void *, char *); 152 }; 153 154 struct ppb_microseq { 155 int opcode; /* microins. opcode */ 156 union ppb_insarg arg[PPB_MS_MAXARGS]; /* arguments */ 157 }; 158 159 /* microseqences used for GET/PUT operations */ 160 struct ppb_xfer { 161 struct ppb_microseq *loop; /* the loop microsequence */ 162 }; 163 164 /* 165 * Parallel Port Bus Device structure. 166 */ 167 struct ppb_data; /* see below */ 168 169 struct ppb_context { 170 int valid; /* 1 if the struct is valid */ 171 int mode; /* XXX chipset operating mode */ 172 173 struct microseq *curpc; /* pc in curmsq */ 174 struct microseq *curmsq; /* currently executed microseqence */ 175 }; 176 177 /* 178 * List of IVARS available to ppb device drivers 179 */ 180 #define PPBUS_IVAR_MODE 0 181 #define PPBUS_IVAR_AVM 1 182 #define PPBUS_IVAR_IRQ 2 183 184 /* other fields are reserved to the ppbus internals */ 185 186 struct ppb_device { 187 188 const char *name; /* name of the device */ 189 190 u_short mode; /* current mode of the device */ 191 u_short avm; /* available IEEE1284 modes of 192 * the device */ 193 u_int flags; /* flags */ 194 195 struct ppb_context ctx; /* context of the device */ 196 197 /* mode dependent get msq. If NULL, 198 * IEEE1284 code is used */ 199 struct ppb_xfer 200 get_xfer[PPB_MAX_XFER]; 201 202 /* mode dependent put msq. If NULL, 203 * IEEE1284 code is used */ 204 struct ppb_xfer 205 put_xfer[PPB_MAX_XFER]; 206 207 struct resource *intr_resource; 208 void *intr_cookie; 209 210 void *drv1, *drv2; /* drivers private data */ 211 }; 212 213 /* EPP standards */ 214 #define EPP_1_9 0x0 /* default */ 215 #define EPP_1_7 0x1 216 217 /* Parallel Port Chipset IVARS */ /* elsewhere XXX */ 218 #define PPC_IVAR_EPP_PROTO 0 219 #define PPC_IVAR_IRQ 1 220 221 /* 222 * Maximum size of the PnP info string 223 */ 224 #define PPB_PnP_STRING_SIZE 256 /* XXX */ 225 226 /* 227 * Parallel Port Bus structure. 228 */ 229 struct ppb_data { 230 231 #define PPB_PnP_PRINTER 0 232 #define PPB_PnP_MODEM 1 233 #define PPB_PnP_NET 2 234 #define PPB_PnP_HDC 3 235 #define PPB_PnP_PCMCIA 4 236 #define PPB_PnP_MEDIA 5 237 #define PPB_PnP_FDC 6 238 #define PPB_PnP_PORTS 7 239 #define PPB_PnP_SCANNER 8 240 #define PPB_PnP_DIGICAM 9 241 #define PPB_PnP_UNKNOWN 10 242 int class_id; /* not a PnP device if class_id < 0 */ 243 244 int state; /* current IEEE1284 state */ 245 int error; /* last IEEE1284 error */ 246 247 int mode; /* IEEE 1284-1994 mode 248 * NIBBLE, PS2, EPP or ECP */ 249 250 void *ppb_owner; /* device which owns the bus */ 251 }; 252 253 #ifdef _KERNEL 254 extern int ppb_attach_device(device_t); 255 extern int ppb_request_bus(device_t, device_t, int); 256 extern int ppb_release_bus(device_t, device_t); 257 258 /* bus related functions */ 259 extern int ppb_get_status(device_t, struct ppb_status *); 260 extern int ppb_poll_bus(device_t, int, char, char, int); 261 extern int ppb_reset_epp_timeout(device_t); 262 extern int ppb_ecp_sync(device_t); 263 extern int ppb_get_epp_protocol(device_t); 264 extern int ppb_set_mode(device_t, int); /* returns old mode */ 265 extern int ppb_get_mode(device_t); /* returns current mode */ 266 extern int ppb_write(device_t, char *, int, int); 267 #endif /* _KERNEL */ 268 269 /* 270 * These are defined as macros for speedup. 271 #define ppb_get_base_addr(dev) ((dev)->ppb->ppb_link->base) 272 #define ppb_get_epp_protocol(dev) ((dev)->ppb->ppb_link->epp_protocol) 273 #define ppb_get_irq(dev) ((dev)->ppb->ppb_link->id_irq) 274 */ 275 276 #endif 277