1 /*- 2 * Copyright (c) 2007-2010 Damien Bergamini <damien.bergamini@free.fr> 3 * Copyright (c) 2012 Bernhard Schmidt <bschmidt@FreeBSD.org> 4 * 5 * Permission to use, copy, modify, and distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 * 17 * $OpenBSD: rt2860.c,v 1.65 2010/10/23 14:24:54 damien Exp $ 18 */ 19 20 #include <sys/cdefs.h> 21 __FBSDID("$FreeBSD$"); 22 23 /*- 24 * Ralink Technology RT2860/RT3090/RT3390/RT3562 chipset driver 25 * http://www.ralinktech.com/ 26 */ 27 28 #include <sys/param.h> 29 #include <sys/sysctl.h> 30 #include <sys/sockio.h> 31 #include <sys/mbuf.h> 32 #include <sys/kernel.h> 33 #include <sys/socket.h> 34 #include <sys/systm.h> 35 #include <sys/malloc.h> 36 #include <sys/lock.h> 37 #include <sys/mutex.h> 38 #include <sys/module.h> 39 #include <sys/bus.h> 40 #include <sys/endian.h> 41 #include <sys/firmware.h> 42 43 #include <machine/bus.h> 44 #include <machine/resource.h> 45 #include <sys/rman.h> 46 47 #include <net/bpf.h> 48 #include <net/if.h> 49 #include <net/if_arp.h> 50 #include <net/ethernet.h> 51 #include <net/if_dl.h> 52 #include <net/if_media.h> 53 #include <net/if_types.h> 54 55 #include <net80211/ieee80211_var.h> 56 #include <net80211/ieee80211_radiotap.h> 57 #include <net80211/ieee80211_regdomain.h> 58 #include <net80211/ieee80211_ratectl.h> 59 60 #include <netinet/in.h> 61 #include <netinet/in_systm.h> 62 #include <netinet/in_var.h> 63 #include <netinet/ip.h> 64 #include <netinet/if_ether.h> 65 66 #include <dev/ral/rt2860reg.h> 67 #include <dev/ral/rt2860var.h> 68 69 #define RAL_DEBUG 70 #ifdef RAL_DEBUG 71 #define DPRINTF(x) do { if (sc->sc_debug > 0) printf x; } while (0) 72 #define DPRINTFN(n, x) do { if (sc->sc_debug >= (n)) printf x; } while (0) 73 #else 74 #define DPRINTF(x) 75 #define DPRINTFN(n, x) 76 #endif 77 78 static struct ieee80211vap *rt2860_vap_create(struct ieee80211com *, 79 const char [IFNAMSIZ], int, enum ieee80211_opmode, 80 int, const uint8_t [IEEE80211_ADDR_LEN], 81 const uint8_t [IEEE80211_ADDR_LEN]); 82 static void rt2860_vap_delete(struct ieee80211vap *); 83 static void rt2860_dma_map_addr(void *, bus_dma_segment_t *, int, int); 84 static int rt2860_alloc_tx_ring(struct rt2860_softc *, 85 struct rt2860_tx_ring *); 86 static void rt2860_reset_tx_ring(struct rt2860_softc *, 87 struct rt2860_tx_ring *); 88 static void rt2860_free_tx_ring(struct rt2860_softc *, 89 struct rt2860_tx_ring *); 90 static int rt2860_alloc_tx_pool(struct rt2860_softc *); 91 static void rt2860_free_tx_pool(struct rt2860_softc *); 92 static int rt2860_alloc_rx_ring(struct rt2860_softc *, 93 struct rt2860_rx_ring *); 94 static void rt2860_reset_rx_ring(struct rt2860_softc *, 95 struct rt2860_rx_ring *); 96 static void rt2860_free_rx_ring(struct rt2860_softc *, 97 struct rt2860_rx_ring *); 98 static void rt2860_updatestats(struct rt2860_softc *); 99 static void rt2860_newassoc(struct ieee80211_node *, int); 100 static void rt2860_node_free(struct ieee80211_node *); 101 #ifdef IEEE80211_HT 102 static int rt2860_ampdu_rx_start(struct ieee80211com *, 103 struct ieee80211_node *, uint8_t); 104 static void rt2860_ampdu_rx_stop(struct ieee80211com *, 105 struct ieee80211_node *, uint8_t); 106 #endif 107 static int rt2860_newstate(struct ieee80211vap *, enum ieee80211_state, 108 int); 109 static uint16_t rt3090_efuse_read_2(struct rt2860_softc *, uint16_t); 110 static uint16_t rt2860_eeprom_read_2(struct rt2860_softc *, uint16_t); 111 static void rt2860_intr_coherent(struct rt2860_softc *); 112 static void rt2860_drain_stats_fifo(struct rt2860_softc *); 113 static void rt2860_tx_intr(struct rt2860_softc *, int); 114 static void rt2860_rx_intr(struct rt2860_softc *); 115 static void rt2860_tbtt_intr(struct rt2860_softc *); 116 static void rt2860_gp_intr(struct rt2860_softc *); 117 static int rt2860_tx(struct rt2860_softc *, struct mbuf *, 118 struct ieee80211_node *); 119 static int rt2860_raw_xmit(struct ieee80211_node *, struct mbuf *, 120 const struct ieee80211_bpf_params *); 121 static int rt2860_tx_raw(struct rt2860_softc *, struct mbuf *, 122 struct ieee80211_node *, 123 const struct ieee80211_bpf_params *params); 124 static void rt2860_start(struct ifnet *); 125 static void rt2860_start_locked(struct ifnet *); 126 static void rt2860_watchdog(void *); 127 static int rt2860_ioctl(struct ifnet *, u_long, caddr_t); 128 static void rt2860_mcu_bbp_write(struct rt2860_softc *, uint8_t, uint8_t); 129 static uint8_t rt2860_mcu_bbp_read(struct rt2860_softc *, uint8_t); 130 static void rt2860_rf_write(struct rt2860_softc *, uint8_t, uint32_t); 131 static uint8_t rt3090_rf_read(struct rt2860_softc *, uint8_t); 132 static void rt3090_rf_write(struct rt2860_softc *, uint8_t, uint8_t); 133 static int rt2860_mcu_cmd(struct rt2860_softc *, uint8_t, uint16_t, int); 134 static void rt2860_enable_mrr(struct rt2860_softc *); 135 static void rt2860_set_txpreamble(struct rt2860_softc *); 136 static void rt2860_set_basicrates(struct rt2860_softc *, 137 const struct ieee80211_rateset *); 138 static void rt2860_scan_start(struct ieee80211com *); 139 static void rt2860_scan_end(struct ieee80211com *); 140 static void rt2860_set_channel(struct ieee80211com *); 141 static void rt2860_select_chan_group(struct rt2860_softc *, int); 142 static void rt2860_set_chan(struct rt2860_softc *, u_int); 143 static void rt3090_set_chan(struct rt2860_softc *, u_int); 144 static int rt3090_rf_init(struct rt2860_softc *); 145 static void rt3090_rf_wakeup(struct rt2860_softc *); 146 static int rt3090_filter_calib(struct rt2860_softc *, uint8_t, uint8_t, 147 uint8_t *); 148 static void rt3090_rf_setup(struct rt2860_softc *); 149 static void rt2860_set_leds(struct rt2860_softc *, uint16_t); 150 static void rt2860_set_gp_timer(struct rt2860_softc *, int); 151 static void rt2860_set_bssid(struct rt2860_softc *, const uint8_t *); 152 static void rt2860_set_macaddr(struct rt2860_softc *, const uint8_t *); 153 static void rt2860_update_promisc(struct ifnet *); 154 static void rt2860_updateslot(struct ifnet *); 155 static void rt2860_updateprot(struct ifnet *); 156 static int rt2860_updateedca(struct ieee80211com *); 157 #ifdef HW_CRYPTO 158 static int rt2860_set_key(struct ieee80211com *, struct ieee80211_node *, 159 struct ieee80211_key *); 160 static void rt2860_delete_key(struct ieee80211com *, 161 struct ieee80211_node *, struct ieee80211_key *); 162 #endif 163 static int8_t rt2860_rssi2dbm(struct rt2860_softc *, uint8_t, uint8_t); 164 static const char *rt2860_get_rf(uint8_t); 165 static int rt2860_read_eeprom(struct rt2860_softc *, 166 uint8_t macaddr[IEEE80211_ADDR_LEN]); 167 static int rt2860_bbp_init(struct rt2860_softc *); 168 static int rt2860_txrx_enable(struct rt2860_softc *); 169 static void rt2860_init(void *); 170 static void rt2860_init_locked(struct rt2860_softc *); 171 static void rt2860_stop(void *); 172 static void rt2860_stop_locked(struct rt2860_softc *); 173 static int rt2860_load_microcode(struct rt2860_softc *); 174 #ifdef NOT_YET 175 static void rt2860_calib(struct rt2860_softc *); 176 #endif 177 static void rt3090_set_rx_antenna(struct rt2860_softc *, int); 178 static void rt2860_switch_chan(struct rt2860_softc *, 179 struct ieee80211_channel *); 180 static int rt2860_setup_beacon(struct rt2860_softc *, 181 struct ieee80211vap *); 182 static void rt2860_enable_tsf_sync(struct rt2860_softc *); 183 184 static const struct { 185 uint32_t reg; 186 uint32_t val; 187 } rt2860_def_mac[] = { 188 RT2860_DEF_MAC 189 }; 190 191 static const struct { 192 uint8_t reg; 193 uint8_t val; 194 } rt2860_def_bbp[] = { 195 RT2860_DEF_BBP 196 }; 197 198 static const struct rfprog { 199 uint8_t chan; 200 uint32_t r1, r2, r3, r4; 201 } rt2860_rf2850[] = { 202 RT2860_RF2850 203 }; 204 205 struct { 206 uint8_t n, r, k; 207 } rt3090_freqs[] = { 208 RT3070_RF3052 209 }; 210 211 static const struct { 212 uint8_t reg; 213 uint8_t val; 214 } rt3090_def_rf[] = { 215 RT3070_DEF_RF 216 }; 217 218 int 219 rt2860_attach(device_t dev, int id) 220 { 221 struct rt2860_softc *sc = device_get_softc(dev); 222 struct ieee80211com *ic; 223 struct ifnet *ifp; 224 uint32_t tmp; 225 int error, ntries, qid; 226 uint8_t bands; 227 uint8_t macaddr[IEEE80211_ADDR_LEN]; 228 229 sc->sc_dev = dev; 230 sc->sc_debug = 0; 231 232 ifp = sc->sc_ifp = if_alloc(IFT_IEEE80211); 233 if (ifp == NULL) { 234 device_printf(sc->sc_dev, "can not if_alloc()\n"); 235 return ENOMEM; 236 } 237 ic = ifp->if_l2com; 238 239 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, 240 MTX_DEF | MTX_RECURSE); 241 242 callout_init_mtx(&sc->watchdog_ch, &sc->sc_mtx, 0); 243 244 /* wait for NIC to initialize */ 245 for (ntries = 0; ntries < 100; ntries++) { 246 tmp = RAL_READ(sc, RT2860_ASIC_VER_ID); 247 if (tmp != 0 && tmp != 0xffffffff) 248 break; 249 DELAY(10); 250 } 251 if (ntries == 100) { 252 device_printf(sc->sc_dev, 253 "timeout waiting for NIC to initialize\n"); 254 error = EIO; 255 goto fail1; 256 } 257 sc->mac_ver = tmp >> 16; 258 sc->mac_rev = tmp & 0xffff; 259 260 if (sc->mac_ver != 0x2860 && 261 (id == 0x0681 || id == 0x0781 || id == 0x1059)) 262 sc->sc_flags |= RT2860_ADVANCED_PS; 263 264 /* retrieve RF rev. no and various other things from EEPROM */ 265 rt2860_read_eeprom(sc, macaddr); 266 if (bootverbose) { 267 device_printf(sc->sc_dev, "MAC/BBP RT%X (rev 0x%04X), " 268 "RF %s (MIMO %dT%dR), address %6D\n", 269 sc->mac_ver, sc->mac_rev, rt2860_get_rf(sc->rf_rev), 270 sc->ntxchains, sc->nrxchains, macaddr, ":"); 271 } 272 273 /* 274 * Allocate Tx (4 EDCAs + HCCA + Mgt) and Rx rings. 275 */ 276 for (qid = 0; qid < 6; qid++) { 277 if ((error = rt2860_alloc_tx_ring(sc, &sc->txq[qid])) != 0) { 278 device_printf(sc->sc_dev, 279 "could not allocate Tx ring %d\n", qid); 280 goto fail2; 281 } 282 } 283 284 if ((error = rt2860_alloc_rx_ring(sc, &sc->rxq)) != 0) { 285 device_printf(sc->sc_dev, "could not allocate Rx ring\n"); 286 goto fail2; 287 } 288 289 if ((error = rt2860_alloc_tx_pool(sc)) != 0) { 290 device_printf(sc->sc_dev, "could not allocate Tx pool\n"); 291 goto fail3; 292 } 293 294 /* mgmt ring is broken on RT2860C, use EDCA AC VO ring instead */ 295 sc->mgtqid = (sc->mac_ver == 0x2860 && sc->mac_rev == 0x0100) ? 296 WME_AC_VO : 5; 297 298 ifp->if_softc = sc; 299 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 300 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 301 ifp->if_init = rt2860_init; 302 ifp->if_ioctl = rt2860_ioctl; 303 ifp->if_start = rt2860_start; 304 IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen); 305 ifp->if_snd.ifq_drv_maxlen = ifqmaxlen; 306 IFQ_SET_READY(&ifp->if_snd); 307 308 ic->ic_ifp = ifp; 309 ic->ic_opmode = IEEE80211_M_STA; 310 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ 311 312 /* set device capabilities */ 313 ic->ic_caps = 314 IEEE80211_C_STA /* station mode */ 315 | IEEE80211_C_IBSS /* ibss, nee adhoc, mode */ 316 | IEEE80211_C_HOSTAP /* hostap mode */ 317 | IEEE80211_C_MONITOR /* monitor mode */ 318 | IEEE80211_C_AHDEMO /* adhoc demo mode */ 319 | IEEE80211_C_WDS /* 4-address traffic works */ 320 | IEEE80211_C_MBSS /* mesh point link mode */ 321 | IEEE80211_C_SHPREAMBLE /* short preamble supported */ 322 | IEEE80211_C_SHSLOT /* short slot time supported */ 323 | IEEE80211_C_WPA /* capable of WPA1+WPA2 */ 324 #if 0 325 | IEEE80211_C_BGSCAN /* capable of bg scanning */ 326 #endif 327 | IEEE80211_C_WME /* 802.11e */ 328 ; 329 330 bands = 0; 331 setbit(&bands, IEEE80211_MODE_11B); 332 setbit(&bands, IEEE80211_MODE_11G); 333 if (sc->rf_rev == RT2860_RF_2750 || sc->rf_rev == RT2860_RF_2850) 334 setbit(&bands, IEEE80211_MODE_11A); 335 ieee80211_init_channels(ic, NULL, &bands); 336 337 ieee80211_ifattach(ic, macaddr); 338 339 ic->ic_wme.wme_update = rt2860_updateedca; 340 ic->ic_scan_start = rt2860_scan_start; 341 ic->ic_scan_end = rt2860_scan_end; 342 ic->ic_set_channel = rt2860_set_channel; 343 ic->ic_updateslot = rt2860_updateslot; 344 ic->ic_update_promisc = rt2860_update_promisc; 345 ic->ic_raw_xmit = rt2860_raw_xmit; 346 sc->sc_node_free = ic->ic_node_free; 347 ic->ic_node_free = rt2860_node_free; 348 ic->ic_newassoc = rt2860_newassoc; 349 350 ic->ic_vap_create = rt2860_vap_create; 351 ic->ic_vap_delete = rt2860_vap_delete; 352 353 ieee80211_radiotap_attach(ic, 354 &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap), 355 RT2860_TX_RADIOTAP_PRESENT, 356 &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap), 357 RT2860_RX_RADIOTAP_PRESENT); 358 359 #ifdef RAL_DEBUG 360 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev), 361 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, 362 "debug", CTLFLAG_RW, &sc->sc_debug, 0, "debug msgs"); 363 #endif 364 if (bootverbose) 365 ieee80211_announce(ic); 366 367 return 0; 368 369 fail3: rt2860_free_rx_ring(sc, &sc->rxq); 370 fail2: while (--qid >= 0) 371 rt2860_free_tx_ring(sc, &sc->txq[qid]); 372 fail1: mtx_destroy(&sc->sc_mtx); 373 if_free(ifp); 374 return error; 375 } 376 377 int 378 rt2860_detach(void *xsc) 379 { 380 struct rt2860_softc *sc = xsc; 381 struct ifnet *ifp = sc->sc_ifp; 382 struct ieee80211com *ic = ifp->if_l2com; 383 int qid; 384 385 RAL_LOCK(sc); 386 rt2860_stop_locked(sc); 387 RAL_UNLOCK(sc); 388 389 ieee80211_ifdetach(ic); 390 391 for (qid = 0; qid < 6; qid++) 392 rt2860_free_tx_ring(sc, &sc->txq[qid]); 393 rt2860_free_rx_ring(sc, &sc->rxq); 394 rt2860_free_tx_pool(sc); 395 396 if_free(ifp); 397 398 mtx_destroy(&sc->sc_mtx); 399 400 return 0; 401 } 402 403 void 404 rt2860_shutdown(void *xsc) 405 { 406 struct rt2860_softc *sc = xsc; 407 408 rt2860_stop(sc); 409 } 410 411 void 412 rt2860_suspend(void *xsc) 413 { 414 struct rt2860_softc *sc = xsc; 415 416 rt2860_stop(sc); 417 } 418 419 void 420 rt2860_resume(void *xsc) 421 { 422 struct rt2860_softc *sc = xsc; 423 struct ifnet *ifp = sc->sc_ifp; 424 425 if (ifp->if_flags & IFF_UP) 426 rt2860_init(sc); 427 } 428 429 static struct ieee80211vap * 430 rt2860_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit, 431 enum ieee80211_opmode opmode, int flags, 432 const uint8_t bssid[IEEE80211_ADDR_LEN], 433 const uint8_t mac[IEEE80211_ADDR_LEN]) 434 { 435 struct ifnet *ifp = ic->ic_ifp; 436 struct rt2860_vap *rvp; 437 struct ieee80211vap *vap; 438 439 switch (opmode) { 440 case IEEE80211_M_STA: 441 case IEEE80211_M_IBSS: 442 case IEEE80211_M_AHDEMO: 443 case IEEE80211_M_MONITOR: 444 case IEEE80211_M_HOSTAP: 445 case IEEE80211_M_MBSS: 446 /* XXXRP: TBD */ 447 if (!TAILQ_EMPTY(&ic->ic_vaps)) { 448 if_printf(ifp, "only 1 vap supported\n"); 449 return NULL; 450 } 451 if (opmode == IEEE80211_M_STA) 452 flags |= IEEE80211_CLONE_NOBEACONS; 453 break; 454 case IEEE80211_M_WDS: 455 if (TAILQ_EMPTY(&ic->ic_vaps) || 456 ic->ic_opmode != IEEE80211_M_HOSTAP) { 457 if_printf(ifp, "wds only supported in ap mode\n"); 458 return NULL; 459 } 460 /* 461 * Silently remove any request for a unique 462 * bssid; WDS vap's always share the local 463 * mac address. 464 */ 465 flags &= ~IEEE80211_CLONE_BSSID; 466 break; 467 default: 468 if_printf(ifp, "unknown opmode %d\n", opmode); 469 return NULL; 470 } 471 rvp = malloc(sizeof(struct rt2860_vap), M_80211_VAP, M_NOWAIT | M_ZERO); 472 if (rvp == NULL) 473 return NULL; 474 vap = &rvp->ral_vap; 475 ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid, mac); 476 477 /* override state transition machine */ 478 rvp->ral_newstate = vap->iv_newstate; 479 vap->iv_newstate = rt2860_newstate; 480 #if 0 481 vap->iv_update_beacon = rt2860_beacon_update; 482 #endif 483 484 /* HW supports up to 255 STAs (0-254) in HostAP and IBSS modes */ 485 vap->iv_max_aid = min(IEEE80211_AID_MAX, RT2860_WCID_MAX); 486 487 ieee80211_ratectl_init(vap); 488 /* complete setup */ 489 ieee80211_vap_attach(vap, ieee80211_media_change, ieee80211_media_status); 490 if (TAILQ_FIRST(&ic->ic_vaps) == vap) 491 ic->ic_opmode = opmode; 492 return vap; 493 } 494 495 static void 496 rt2860_vap_delete(struct ieee80211vap *vap) 497 { 498 struct rt2860_vap *rvp = RT2860_VAP(vap); 499 500 ieee80211_ratectl_deinit(vap); 501 ieee80211_vap_detach(vap); 502 free(rvp, M_80211_VAP); 503 } 504 505 static void 506 rt2860_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) 507 { 508 if (error != 0) 509 return; 510 511 KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg)); 512 513 *(bus_addr_t *)arg = segs[0].ds_addr; 514 } 515 516 517 static int 518 rt2860_alloc_tx_ring(struct rt2860_softc *sc, struct rt2860_tx_ring *ring) 519 { 520 int size, error; 521 522 size = RT2860_TX_RING_COUNT * sizeof (struct rt2860_txd); 523 524 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 16, 0, 525 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 526 size, 1, size, 0, NULL, NULL, &ring->desc_dmat); 527 if (error != 0) { 528 device_printf(sc->sc_dev, "could not create desc DMA map\n"); 529 goto fail; 530 } 531 532 error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->txd, 533 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); 534 if (error != 0) { 535 device_printf(sc->sc_dev, "could not allocate DMA memory\n"); 536 goto fail; 537 } 538 539 error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->txd, 540 size, rt2860_dma_map_addr, &ring->paddr, 0); 541 if (error != 0) { 542 device_printf(sc->sc_dev, "could not load desc DMA map\n"); 543 goto fail; 544 } 545 546 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 547 548 return 0; 549 550 fail: rt2860_free_tx_ring(sc, ring); 551 return error; 552 } 553 554 void 555 rt2860_reset_tx_ring(struct rt2860_softc *sc, struct rt2860_tx_ring *ring) 556 { 557 struct rt2860_tx_data *data; 558 int i; 559 560 for (i = 0; i < RT2860_TX_RING_COUNT; i++) { 561 if ((data = ring->data[i]) == NULL) 562 continue; /* nothing mapped in this slot */ 563 564 if (data->m != NULL) { 565 bus_dmamap_sync(sc->txwi_dmat, data->map, 566 BUS_DMASYNC_POSTWRITE); 567 bus_dmamap_unload(sc->txwi_dmat, data->map); 568 m_freem(data->m); 569 data->m = NULL; 570 } 571 if (data->ni != NULL) { 572 ieee80211_free_node(data->ni); 573 data->ni = NULL; 574 } 575 576 SLIST_INSERT_HEAD(&sc->data_pool, data, next); 577 ring->data[i] = NULL; 578 } 579 580 ring->queued = 0; 581 ring->cur = ring->next = 0; 582 } 583 584 void 585 rt2860_free_tx_ring(struct rt2860_softc *sc, struct rt2860_tx_ring *ring) 586 { 587 struct rt2860_tx_data *data; 588 int i; 589 590 if (ring->txd != NULL) { 591 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, 592 BUS_DMASYNC_POSTWRITE); 593 bus_dmamap_unload(ring->desc_dmat, ring->desc_map); 594 bus_dmamem_free(ring->desc_dmat, ring->txd, ring->desc_map); 595 } 596 if (ring->desc_dmat != NULL) 597 bus_dma_tag_destroy(ring->desc_dmat); 598 599 for (i = 0; i < RT2860_TX_RING_COUNT; i++) { 600 if ((data = ring->data[i]) == NULL) 601 continue; /* nothing mapped in this slot */ 602 603 if (data->m != NULL) { 604 bus_dmamap_sync(sc->txwi_dmat, data->map, 605 BUS_DMASYNC_POSTWRITE); 606 bus_dmamap_unload(sc->txwi_dmat, data->map); 607 m_freem(data->m); 608 } 609 if (data->ni != NULL) 610 ieee80211_free_node(data->ni); 611 612 SLIST_INSERT_HEAD(&sc->data_pool, data, next); 613 } 614 } 615 616 /* 617 * Allocate a pool of TX Wireless Information blocks. 618 */ 619 int 620 rt2860_alloc_tx_pool(struct rt2860_softc *sc) 621 { 622 caddr_t vaddr; 623 bus_addr_t paddr; 624 int i, size, error; 625 626 size = RT2860_TX_POOL_COUNT * RT2860_TXWI_DMASZ; 627 628 /* init data_pool early in case of failure.. */ 629 SLIST_INIT(&sc->data_pool); 630 631 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 632 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 633 size, 1, size, 0, NULL, NULL, &sc->txwi_dmat); 634 if (error != 0) { 635 device_printf(sc->sc_dev, "could not create txwi DMA tag\n"); 636 goto fail; 637 } 638 639 error = bus_dmamem_alloc(sc->txwi_dmat, (void **)&sc->txwi_vaddr, 640 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &sc->txwi_map); 641 if (error != 0) { 642 device_printf(sc->sc_dev, "could not allocate DMA memory\n"); 643 goto fail; 644 } 645 646 error = bus_dmamap_load(sc->txwi_dmat, sc->txwi_map, 647 sc->txwi_vaddr, size, rt2860_dma_map_addr, &paddr, 0); 648 if (error != 0) { 649 device_printf(sc->sc_dev, "could not load txwi DMA map\n"); 650 goto fail; 651 } 652 653 bus_dmamap_sync(sc->txwi_dmat, sc->txwi_map, BUS_DMASYNC_PREWRITE); 654 655 vaddr = sc->txwi_vaddr; 656 for (i = 0; i < RT2860_TX_POOL_COUNT; i++) { 657 struct rt2860_tx_data *data = &sc->data[i]; 658 659 error = bus_dmamap_create(sc->txwi_dmat, 0, &data->map); 660 if (error != 0) { 661 device_printf(sc->sc_dev, "could not create DMA map\n"); 662 goto fail; 663 } 664 data->txwi = (struct rt2860_txwi *)vaddr; 665 data->paddr = paddr; 666 vaddr += RT2860_TXWI_DMASZ; 667 paddr += RT2860_TXWI_DMASZ; 668 669 SLIST_INSERT_HEAD(&sc->data_pool, data, next); 670 } 671 672 return 0; 673 674 fail: rt2860_free_tx_pool(sc); 675 return error; 676 } 677 678 void 679 rt2860_free_tx_pool(struct rt2860_softc *sc) 680 { 681 if (sc->txwi_vaddr != NULL) { 682 bus_dmamap_sync(sc->txwi_dmat, sc->txwi_map, 683 BUS_DMASYNC_POSTWRITE); 684 bus_dmamap_unload(sc->txwi_dmat, sc->txwi_map); 685 bus_dmamem_free(sc->txwi_dmat, sc->txwi_vaddr, sc->txwi_map); 686 } 687 if (sc->txwi_dmat != NULL) 688 bus_dma_tag_destroy(sc->txwi_dmat); 689 690 while (!SLIST_EMPTY(&sc->data_pool)) { 691 struct rt2860_tx_data *data; 692 data = SLIST_FIRST(&sc->data_pool); 693 bus_dmamap_destroy(sc->txwi_dmat, data->map); 694 SLIST_REMOVE_HEAD(&sc->data_pool, next); 695 } 696 } 697 698 int 699 rt2860_alloc_rx_ring(struct rt2860_softc *sc, struct rt2860_rx_ring *ring) 700 { 701 bus_addr_t physaddr; 702 int i, size, error; 703 704 size = RT2860_RX_RING_COUNT * sizeof (struct rt2860_rxd); 705 706 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 16, 0, 707 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 708 size, 1, size, 0, NULL, NULL, &ring->desc_dmat); 709 if (error != 0) { 710 device_printf(sc->sc_dev, "could not create desc DMA tag\n"); 711 goto fail; 712 } 713 714 error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->rxd, 715 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); 716 if (error != 0) { 717 device_printf(sc->sc_dev, "could not allocate DMA memory\n"); 718 goto fail; 719 } 720 721 error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->rxd, 722 size, rt2860_dma_map_addr, &ring->paddr, 0); 723 if (error != 0) { 724 device_printf(sc->sc_dev, "could not load desc DMA map\n"); 725 goto fail; 726 } 727 728 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 729 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 730 1, MCLBYTES, 0, NULL, NULL, &ring->data_dmat); 731 if (error != 0) { 732 device_printf(sc->sc_dev, "could not create data DMA tag\n"); 733 goto fail; 734 } 735 736 for (i = 0; i < RT2860_RX_RING_COUNT; i++) { 737 struct rt2860_rx_data *data = &ring->data[i]; 738 struct rt2860_rxd *rxd = &ring->rxd[i]; 739 740 error = bus_dmamap_create(ring->data_dmat, 0, &data->map); 741 if (error != 0) { 742 device_printf(sc->sc_dev, "could not create DMA map\n"); 743 goto fail; 744 } 745 746 data->m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 747 if (data->m == NULL) { 748 device_printf(sc->sc_dev, 749 "could not allocate rx mbuf\n"); 750 error = ENOMEM; 751 goto fail; 752 } 753 754 error = bus_dmamap_load(ring->data_dmat, data->map, 755 mtod(data->m, void *), MCLBYTES, rt2860_dma_map_addr, 756 &physaddr, 0); 757 if (error != 0) { 758 device_printf(sc->sc_dev, 759 "could not load rx buf DMA map"); 760 goto fail; 761 } 762 763 rxd->sdp0 = htole32(physaddr); 764 rxd->sdl0 = htole16(MCLBYTES); 765 } 766 767 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 768 769 return 0; 770 771 fail: rt2860_free_rx_ring(sc, ring); 772 return error; 773 } 774 775 void 776 rt2860_reset_rx_ring(struct rt2860_softc *sc, struct rt2860_rx_ring *ring) 777 { 778 int i; 779 780 for (i = 0; i < RT2860_RX_RING_COUNT; i++) 781 ring->rxd[i].sdl0 &= ~htole16(RT2860_RX_DDONE); 782 783 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 784 785 ring->cur = 0; 786 } 787 788 void 789 rt2860_free_rx_ring(struct rt2860_softc *sc, struct rt2860_rx_ring *ring) 790 { 791 int i; 792 793 if (ring->rxd != NULL) { 794 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, 795 BUS_DMASYNC_POSTWRITE); 796 bus_dmamap_unload(ring->desc_dmat, ring->desc_map); 797 bus_dmamem_free(ring->desc_dmat, ring->rxd, ring->desc_map); 798 } 799 if (ring->desc_dmat != NULL) 800 bus_dma_tag_destroy(ring->desc_dmat); 801 802 for (i = 0; i < RT2860_RX_RING_COUNT; i++) { 803 struct rt2860_rx_data *data = &ring->data[i]; 804 805 if (data->m != NULL) { 806 bus_dmamap_sync(ring->data_dmat, data->map, 807 BUS_DMASYNC_POSTREAD); 808 bus_dmamap_unload(ring->data_dmat, data->map); 809 m_freem(data->m); 810 } 811 if (data->map != NULL) 812 bus_dmamap_destroy(ring->data_dmat, data->map); 813 } 814 if (ring->data_dmat != NULL) 815 bus_dma_tag_destroy(ring->data_dmat); 816 } 817 818 static void 819 rt2860_updatestats(struct rt2860_softc *sc) 820 { 821 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 822 823 /* 824 * In IBSS or HostAP modes (when the hardware sends beacons), the 825 * MAC can run into a livelock and start sending CTS-to-self frames 826 * like crazy if protection is enabled. Fortunately, we can detect 827 * when such a situation occurs and reset the MAC. 828 */ 829 if (ic->ic_curmode != IEEE80211_M_STA) { 830 /* check if we're in a livelock situation.. */ 831 uint32_t tmp = RAL_READ(sc, RT2860_DEBUG); 832 if ((tmp & (1 << 29)) && (tmp & (1 << 7 | 1 << 5))) { 833 /* ..and reset MAC/BBP for a while.. */ 834 DPRINTF(("CTS-to-self livelock detected\n")); 835 RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, RT2860_MAC_SRST); 836 RAL_BARRIER_WRITE(sc); 837 DELAY(1); 838 RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, 839 RT2860_MAC_RX_EN | RT2860_MAC_TX_EN); 840 } 841 } 842 } 843 844 static void 845 rt2860_newassoc(struct ieee80211_node *ni, int isnew) 846 { 847 struct ieee80211com *ic = ni->ni_ic; 848 struct rt2860_softc *sc = ic->ic_ifp->if_softc; 849 uint8_t wcid; 850 851 wcid = IEEE80211_AID(ni->ni_associd); 852 if (isnew && ni->ni_associd != 0) { 853 sc->wcid2ni[wcid] = ni; 854 855 /* init WCID table entry */ 856 RAL_WRITE_REGION_1(sc, RT2860_WCID_ENTRY(wcid), 857 ni->ni_macaddr, IEEE80211_ADDR_LEN); 858 } 859 DPRINTF(("new assoc isnew=%d addr=%s WCID=%d\n", 860 isnew, ether_sprintf(ni->ni_macaddr), wcid)); 861 } 862 863 static void 864 rt2860_node_free(struct ieee80211_node *ni) 865 { 866 struct ieee80211com *ic = ni->ni_ic; 867 struct rt2860_softc *sc = ic->ic_ifp->if_softc; 868 uint8_t wcid; 869 870 if (ni->ni_associd != 0) { 871 wcid = IEEE80211_AID(ni->ni_associd); 872 873 /* clear Rx WCID search table entry */ 874 RAL_SET_REGION_4(sc, RT2860_WCID_ENTRY(wcid), 0, 2); 875 } 876 sc->sc_node_free(ni); 877 } 878 879 #ifdef IEEE80211_HT 880 static int 881 rt2860_ampdu_rx_start(struct ieee80211com *ic, struct ieee80211_node *ni, 882 uint8_t tid) 883 { 884 struct rt2860_softc *sc = ic->ic_softc; 885 uint8_t wcid = ((struct rt2860_node *)ni)->wcid; 886 uint32_t tmp; 887 888 /* update BA session mask */ 889 tmp = RAL_READ(sc, RT2860_WCID_ENTRY(wcid) + 4); 890 tmp |= (1 << tid) << 16; 891 RAL_WRITE(sc, RT2860_WCID_ENTRY(wcid) + 4, tmp); 892 return 0; 893 } 894 895 static void 896 rt2860_ampdu_rx_stop(struct ieee80211com *ic, struct ieee80211_node *ni, 897 uint8_t tid) 898 { 899 struct rt2860_softc *sc = ic->ic_softc; 900 uint8_t wcid = ((struct rt2860_node *)ni)->wcid; 901 uint32_t tmp; 902 903 /* update BA session mask */ 904 tmp = RAL_READ(sc, RT2860_WCID_ENTRY(wcid) + 4); 905 tmp &= ~((1 << tid) << 16); 906 RAL_WRITE(sc, RT2860_WCID_ENTRY(wcid) + 4, tmp); 907 } 908 #endif 909 910 int 911 rt2860_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) 912 { 913 struct rt2860_vap *rvp = RT2860_VAP(vap); 914 struct ieee80211com *ic = vap->iv_ic; 915 struct rt2860_softc *sc = ic->ic_ifp->if_softc; 916 uint32_t tmp; 917 int error; 918 919 if (vap->iv_state == IEEE80211_S_RUN) { 920 /* turn link LED off */ 921 rt2860_set_leds(sc, RT2860_LED_RADIO); 922 } 923 924 if (nstate == IEEE80211_S_INIT && vap->iv_state == IEEE80211_S_RUN) { 925 /* abort TSF synchronization */ 926 tmp = RAL_READ(sc, RT2860_BCN_TIME_CFG); 927 RAL_WRITE(sc, RT2860_BCN_TIME_CFG, 928 tmp & ~(RT2860_BCN_TX_EN | RT2860_TSF_TIMER_EN | 929 RT2860_TBTT_TIMER_EN)); 930 } 931 932 rt2860_set_gp_timer(sc, 0); 933 934 error = rvp->ral_newstate(vap, nstate, arg); 935 if (error != 0) 936 return (error); 937 938 if (nstate == IEEE80211_S_RUN) { 939 struct ieee80211_node *ni = vap->iv_bss; 940 941 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 942 rt2860_enable_mrr(sc); 943 rt2860_set_txpreamble(sc); 944 rt2860_set_basicrates(sc, &ni->ni_rates); 945 rt2860_set_bssid(sc, ni->ni_bssid); 946 } 947 948 if (vap->iv_opmode == IEEE80211_M_HOSTAP || 949 vap->iv_opmode == IEEE80211_M_IBSS || 950 vap->iv_opmode == IEEE80211_M_MBSS) { 951 error = rt2860_setup_beacon(sc, vap); 952 if (error != 0) 953 return error; 954 } 955 956 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 957 rt2860_enable_tsf_sync(sc); 958 rt2860_set_gp_timer(sc, 500); 959 } 960 961 /* turn link LED on */ 962 rt2860_set_leds(sc, RT2860_LED_RADIO | 963 (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan) ? 964 RT2860_LED_LINK_2GHZ : RT2860_LED_LINK_5GHZ)); 965 } 966 return error; 967 } 968 969 /* Read 16-bit from eFUSE ROM (>=RT3071 only.) */ 970 static uint16_t 971 rt3090_efuse_read_2(struct rt2860_softc *sc, uint16_t addr) 972 { 973 uint32_t tmp; 974 uint16_t reg; 975 int ntries; 976 977 addr *= 2; 978 /*- 979 * Read one 16-byte block into registers EFUSE_DATA[0-3]: 980 * DATA0: F E D C 981 * DATA1: B A 9 8 982 * DATA2: 7 6 5 4 983 * DATA3: 3 2 1 0 984 */ 985 tmp = RAL_READ(sc, RT3070_EFUSE_CTRL); 986 tmp &= ~(RT3070_EFSROM_MODE_MASK | RT3070_EFSROM_AIN_MASK); 987 tmp |= (addr & ~0xf) << RT3070_EFSROM_AIN_SHIFT | RT3070_EFSROM_KICK; 988 RAL_WRITE(sc, RT3070_EFUSE_CTRL, tmp); 989 for (ntries = 0; ntries < 500; ntries++) { 990 tmp = RAL_READ(sc, RT3070_EFUSE_CTRL); 991 if (!(tmp & RT3070_EFSROM_KICK)) 992 break; 993 DELAY(2); 994 } 995 if (ntries == 500) 996 return 0xffff; 997 998 if ((tmp & RT3070_EFUSE_AOUT_MASK) == RT3070_EFUSE_AOUT_MASK) 999 return 0xffff; /* address not found */ 1000 1001 /* determine to which 32-bit register our 16-bit word belongs */ 1002 reg = RT3070_EFUSE_DATA3 - (addr & 0xc); 1003 tmp = RAL_READ(sc, reg); 1004 1005 return (addr & 2) ? tmp >> 16 : tmp & 0xffff; 1006 } 1007 1008 /* 1009 * Read 16 bits at address 'addr' from the serial EEPROM (either 93C46, 1010 * 93C66 or 93C86). 1011 */ 1012 static uint16_t 1013 rt2860_eeprom_read_2(struct rt2860_softc *sc, uint16_t addr) 1014 { 1015 uint32_t tmp; 1016 uint16_t val; 1017 int n; 1018 1019 /* clock C once before the first command */ 1020 RT2860_EEPROM_CTL(sc, 0); 1021 1022 RT2860_EEPROM_CTL(sc, RT2860_S); 1023 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_C); 1024 RT2860_EEPROM_CTL(sc, RT2860_S); 1025 1026 /* write start bit (1) */ 1027 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D); 1028 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D | RT2860_C); 1029 1030 /* write READ opcode (10) */ 1031 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D); 1032 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D | RT2860_C); 1033 RT2860_EEPROM_CTL(sc, RT2860_S); 1034 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_C); 1035 1036 /* write address (A5-A0 or A7-A0) */ 1037 n = ((RAL_READ(sc, RT2860_PCI_EECTRL) & 0x30) == 0) ? 5 : 7; 1038 for (; n >= 0; n--) { 1039 RT2860_EEPROM_CTL(sc, RT2860_S | 1040 (((addr >> n) & 1) << RT2860_SHIFT_D)); 1041 RT2860_EEPROM_CTL(sc, RT2860_S | 1042 (((addr >> n) & 1) << RT2860_SHIFT_D) | RT2860_C); 1043 } 1044 1045 RT2860_EEPROM_CTL(sc, RT2860_S); 1046 1047 /* read data Q15-Q0 */ 1048 val = 0; 1049 for (n = 15; n >= 0; n--) { 1050 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_C); 1051 tmp = RAL_READ(sc, RT2860_PCI_EECTRL); 1052 val |= ((tmp & RT2860_Q) >> RT2860_SHIFT_Q) << n; 1053 RT2860_EEPROM_CTL(sc, RT2860_S); 1054 } 1055 1056 RT2860_EEPROM_CTL(sc, 0); 1057 1058 /* clear Chip Select and clock C */ 1059 RT2860_EEPROM_CTL(sc, RT2860_S); 1060 RT2860_EEPROM_CTL(sc, 0); 1061 RT2860_EEPROM_CTL(sc, RT2860_C); 1062 1063 return val; 1064 } 1065 1066 static __inline uint16_t 1067 rt2860_srom_read(struct rt2860_softc *sc, uint8_t addr) 1068 { 1069 /* either eFUSE ROM or EEPROM */ 1070 return sc->sc_srom_read(sc, addr); 1071 } 1072 1073 static void 1074 rt2860_intr_coherent(struct rt2860_softc *sc) 1075 { 1076 uint32_t tmp; 1077 1078 /* DMA finds data coherent event when checking the DDONE bit */ 1079 1080 DPRINTF(("Tx/Rx Coherent interrupt\n")); 1081 1082 /* restart DMA engine */ 1083 tmp = RAL_READ(sc, RT2860_WPDMA_GLO_CFG); 1084 tmp &= ~(RT2860_TX_WB_DDONE | RT2860_RX_DMA_EN | RT2860_TX_DMA_EN); 1085 RAL_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp); 1086 1087 (void)rt2860_txrx_enable(sc); 1088 } 1089 1090 static void 1091 rt2860_drain_stats_fifo(struct rt2860_softc *sc) 1092 { 1093 struct ifnet *ifp = sc->sc_ifp; 1094 struct ieee80211_node *ni; 1095 uint32_t stat; 1096 int retrycnt; 1097 uint8_t wcid, mcs, pid; 1098 1099 /* drain Tx status FIFO (maxsize = 16) */ 1100 while ((stat = RAL_READ(sc, RT2860_TX_STAT_FIFO)) & RT2860_TXQ_VLD) { 1101 DPRINTFN(4, ("tx stat 0x%08x\n", stat)); 1102 1103 wcid = (stat >> RT2860_TXQ_WCID_SHIFT) & 0xff; 1104 ni = sc->wcid2ni[wcid]; 1105 1106 /* if no ACK was requested, no feedback is available */ 1107 if (!(stat & RT2860_TXQ_ACKREQ) || wcid == 0xff || ni == NULL) 1108 continue; 1109 1110 /* update per-STA AMRR stats */ 1111 if (stat & RT2860_TXQ_OK) { 1112 /* 1113 * Check if there were retries, ie if the Tx success 1114 * rate is different from the requested rate. Note 1115 * that it works only because we do not allow rate 1116 * fallback from OFDM to CCK. 1117 */ 1118 mcs = (stat >> RT2860_TXQ_MCS_SHIFT) & 0x7f; 1119 pid = (stat >> RT2860_TXQ_PID_SHIFT) & 0xf; 1120 if (mcs + 1 != pid) 1121 retrycnt = 1; 1122 else 1123 retrycnt = 0; 1124 ieee80211_ratectl_tx_complete(ni->ni_vap, ni, 1125 IEEE80211_RATECTL_TX_SUCCESS, &retrycnt, NULL); 1126 } else { 1127 ieee80211_ratectl_tx_complete(ni->ni_vap, ni, 1128 IEEE80211_RATECTL_TX_FAILURE, &retrycnt, NULL); 1129 ifp->if_oerrors++; 1130 } 1131 } 1132 } 1133 1134 static void 1135 rt2860_tx_intr(struct rt2860_softc *sc, int qid) 1136 { 1137 struct ifnet *ifp = sc->sc_ifp; 1138 struct rt2860_tx_ring *ring = &sc->txq[qid]; 1139 uint32_t hw; 1140 1141 rt2860_drain_stats_fifo(sc); 1142 1143 hw = RAL_READ(sc, RT2860_TX_DTX_IDX(qid)); 1144 while (ring->next != hw) { 1145 struct rt2860_tx_data *data = ring->data[ring->next]; 1146 1147 if (data != NULL) { 1148 bus_dmamap_sync(sc->txwi_dmat, data->map, 1149 BUS_DMASYNC_POSTWRITE); 1150 bus_dmamap_unload(sc->txwi_dmat, data->map); 1151 if (data->m->m_flags & M_TXCB) { 1152 ieee80211_process_callback(data->ni, data->m, 1153 0); 1154 } 1155 m_freem(data->m); 1156 ieee80211_free_node(data->ni); 1157 data->m = NULL; 1158 data->ni = NULL; 1159 1160 SLIST_INSERT_HEAD(&sc->data_pool, data, next); 1161 ring->data[ring->next] = NULL; 1162 1163 ifp->if_opackets++; 1164 } 1165 ring->queued--; 1166 ring->next = (ring->next + 1) % RT2860_TX_RING_COUNT; 1167 } 1168 1169 sc->sc_tx_timer = 0; 1170 if (ring->queued < RT2860_TX_RING_COUNT) 1171 sc->qfullmsk &= ~(1 << qid); 1172 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 1173 rt2860_start_locked(ifp); 1174 } 1175 1176 /* 1177 * Return the Rx chain with the highest RSSI for a given frame. 1178 */ 1179 static __inline uint8_t 1180 rt2860_maxrssi_chain(struct rt2860_softc *sc, const struct rt2860_rxwi *rxwi) 1181 { 1182 uint8_t rxchain = 0; 1183 1184 if (sc->nrxchains > 1) { 1185 if (rxwi->rssi[1] > rxwi->rssi[rxchain]) 1186 rxchain = 1; 1187 if (sc->nrxchains > 2) 1188 if (rxwi->rssi[2] > rxwi->rssi[rxchain]) 1189 rxchain = 2; 1190 } 1191 return rxchain; 1192 } 1193 1194 static void 1195 rt2860_rx_intr(struct rt2860_softc *sc) 1196 { 1197 struct rt2860_rx_radiotap_header *tap; 1198 struct ifnet *ifp = sc->sc_ifp; 1199 struct ieee80211com *ic = ifp->if_l2com; 1200 struct ieee80211_frame *wh; 1201 struct ieee80211_node *ni; 1202 struct mbuf *m, *m1; 1203 bus_addr_t physaddr; 1204 uint32_t hw; 1205 uint16_t phy; 1206 uint8_t ant; 1207 int8_t rssi, nf; 1208 int error; 1209 1210 hw = RAL_READ(sc, RT2860_FS_DRX_IDX) & 0xfff; 1211 while (sc->rxq.cur != hw) { 1212 struct rt2860_rx_data *data = &sc->rxq.data[sc->rxq.cur]; 1213 struct rt2860_rxd *rxd = &sc->rxq.rxd[sc->rxq.cur]; 1214 struct rt2860_rxwi *rxwi; 1215 1216 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 1217 BUS_DMASYNC_POSTREAD); 1218 1219 if (__predict_false(!(rxd->sdl0 & htole16(RT2860_RX_DDONE)))) { 1220 DPRINTF(("RXD DDONE bit not set!\n")); 1221 break; /* should not happen */ 1222 } 1223 1224 if (__predict_false(rxd->flags & 1225 htole32(RT2860_RX_CRCERR | RT2860_RX_ICVERR))) { 1226 ifp->if_ierrors++; 1227 goto skip; 1228 } 1229 1230 #ifdef HW_CRYPTO 1231 if (__predict_false(rxd->flags & htole32(RT2860_RX_MICERR))) { 1232 /* report MIC failures to net80211 for TKIP */ 1233 ic->ic_stats.is_rx_locmicfail++; 1234 ieee80211_michael_mic_failure(ic, 0/* XXX */); 1235 ifp->if_ierrors++; 1236 goto skip; 1237 } 1238 #endif 1239 1240 m1 = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 1241 if (__predict_false(m1 == NULL)) { 1242 ifp->if_ierrors++; 1243 goto skip; 1244 } 1245 1246 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 1247 BUS_DMASYNC_POSTREAD); 1248 bus_dmamap_unload(sc->rxq.data_dmat, data->map); 1249 1250 error = bus_dmamap_load(sc->rxq.data_dmat, data->map, 1251 mtod(m1, void *), MCLBYTES, rt2860_dma_map_addr, 1252 &physaddr, 0); 1253 if (__predict_false(error != 0)) { 1254 m_freem(m1); 1255 1256 /* try to reload the old mbuf */ 1257 error = bus_dmamap_load(sc->rxq.data_dmat, data->map, 1258 mtod(data->m, void *), MCLBYTES, 1259 rt2860_dma_map_addr, &physaddr, 0); 1260 if (__predict_false(error != 0)) { 1261 panic("%s: could not load old rx mbuf", 1262 device_get_name(sc->sc_dev)); 1263 } 1264 /* physical address may have changed */ 1265 rxd->sdp0 = htole32(physaddr); 1266 ifp->if_ierrors++; 1267 goto skip; 1268 } 1269 1270 /* 1271 * New mbuf successfully loaded, update Rx ring and continue 1272 * processing. 1273 */ 1274 m = data->m; 1275 data->m = m1; 1276 rxd->sdp0 = htole32(physaddr); 1277 1278 rxwi = mtod(m, struct rt2860_rxwi *); 1279 1280 /* finalize mbuf */ 1281 m->m_pkthdr.rcvif = ifp; 1282 m->m_data = (caddr_t)(rxwi + 1); 1283 m->m_pkthdr.len = m->m_len = le16toh(rxwi->len) & 0xfff; 1284 1285 wh = mtod(m, struct ieee80211_frame *); 1286 #ifdef HW_CRYPTO 1287 if (wh->i_fc[1] & IEEE80211_FC1_WEP) { 1288 /* frame is decrypted by hardware */ 1289 wh->i_fc[1] &= ~IEEE80211_FC1_WEP; 1290 } 1291 #endif 1292 1293 /* HW may insert 2 padding bytes after 802.11 header */ 1294 if (rxd->flags & htole32(RT2860_RX_L2PAD)) { 1295 u_int hdrlen = ieee80211_hdrsize(wh); 1296 ovbcopy(wh, (caddr_t)wh + 2, hdrlen); 1297 m->m_data += 2; 1298 wh = mtod(m, struct ieee80211_frame *); 1299 } 1300 1301 ant = rt2860_maxrssi_chain(sc, rxwi); 1302 rssi = rt2860_rssi2dbm(sc, rxwi->rssi[ant], ant); 1303 nf = RT2860_NOISE_FLOOR; 1304 1305 if (ieee80211_radiotap_active(ic)) { 1306 tap = &sc->sc_rxtap; 1307 tap->wr_flags = 0; 1308 tap->wr_antenna = ant; 1309 tap->wr_antsignal = nf + rssi; 1310 tap->wr_antnoise = nf; 1311 /* in case it can't be found below */ 1312 tap->wr_rate = 2; 1313 phy = le16toh(rxwi->phy); 1314 switch (phy & RT2860_PHY_MODE) { 1315 case RT2860_PHY_CCK: 1316 switch ((phy & RT2860_PHY_MCS) & ~RT2860_PHY_SHPRE) { 1317 case 0: tap->wr_rate = 2; break; 1318 case 1: tap->wr_rate = 4; break; 1319 case 2: tap->wr_rate = 11; break; 1320 case 3: tap->wr_rate = 22; break; 1321 } 1322 if (phy & RT2860_PHY_SHPRE) 1323 tap->wr_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; 1324 break; 1325 case RT2860_PHY_OFDM: 1326 switch (phy & RT2860_PHY_MCS) { 1327 case 0: tap->wr_rate = 12; break; 1328 case 1: tap->wr_rate = 18; break; 1329 case 2: tap->wr_rate = 24; break; 1330 case 3: tap->wr_rate = 36; break; 1331 case 4: tap->wr_rate = 48; break; 1332 case 5: tap->wr_rate = 72; break; 1333 case 6: tap->wr_rate = 96; break; 1334 case 7: tap->wr_rate = 108; break; 1335 } 1336 break; 1337 } 1338 } 1339 1340 RAL_UNLOCK(sc); 1341 wh = mtod(m, struct ieee80211_frame *); 1342 1343 /* send the frame to the 802.11 layer */ 1344 ni = ieee80211_find_rxnode(ic, 1345 (struct ieee80211_frame_min *)wh); 1346 if (ni != NULL) { 1347 (void)ieee80211_input(ni, m, rssi - nf, nf); 1348 ieee80211_free_node(ni); 1349 } else 1350 (void)ieee80211_input_all(ic, m, rssi - nf, nf); 1351 1352 RAL_LOCK(sc); 1353 1354 skip: rxd->sdl0 &= ~htole16(RT2860_RX_DDONE); 1355 1356 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 1357 BUS_DMASYNC_PREWRITE); 1358 1359 sc->rxq.cur = (sc->rxq.cur + 1) % RT2860_RX_RING_COUNT; 1360 } 1361 1362 /* tell HW what we have processed */ 1363 RAL_WRITE(sc, RT2860_RX_CALC_IDX, 1364 (sc->rxq.cur - 1) % RT2860_RX_RING_COUNT); 1365 } 1366 1367 static void 1368 rt2860_tbtt_intr(struct rt2860_softc *sc) 1369 { 1370 #if 0 1371 struct ieee80211com *ic = &sc->sc_ic; 1372 1373 #ifndef IEEE80211_STA_ONLY 1374 if (ic->ic_opmode == IEEE80211_M_HOSTAP) { 1375 /* one less beacon until next DTIM */ 1376 if (ic->ic_dtim_count == 0) 1377 ic->ic_dtim_count = ic->ic_dtim_period - 1; 1378 else 1379 ic->ic_dtim_count--; 1380 1381 /* update dynamic parts of beacon */ 1382 rt2860_setup_beacon(sc); 1383 1384 /* flush buffered multicast frames */ 1385 if (ic->ic_dtim_count == 0) 1386 ieee80211_notify_dtim(ic); 1387 } 1388 #endif 1389 /* check if protection mode has changed */ 1390 if ((sc->sc_ic_flags ^ ic->ic_flags) & IEEE80211_F_USEPROT) { 1391 rt2860_updateprot(ic); 1392 sc->sc_ic_flags = ic->ic_flags; 1393 } 1394 #endif 1395 } 1396 1397 static void 1398 rt2860_gp_intr(struct rt2860_softc *sc) 1399 { 1400 struct ieee80211com *ic = sc->sc_ifp->if_l2com; 1401 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 1402 1403 DPRINTFN(2, ("GP timeout state=%d\n", vap->iv_state)); 1404 1405 if (vap->iv_state == IEEE80211_S_RUN) 1406 rt2860_updatestats(sc); 1407 } 1408 1409 void 1410 rt2860_intr(void *arg) 1411 { 1412 struct rt2860_softc *sc = arg; 1413 uint32_t r; 1414 1415 RAL_LOCK(sc); 1416 1417 r = RAL_READ(sc, RT2860_INT_STATUS); 1418 if (__predict_false(r == 0xffffffff)) { 1419 RAL_UNLOCK(sc); 1420 return; /* device likely went away */ 1421 } 1422 if (r == 0) { 1423 RAL_UNLOCK(sc); 1424 return; /* not for us */ 1425 } 1426 1427 /* acknowledge interrupts */ 1428 RAL_WRITE(sc, RT2860_INT_STATUS, r); 1429 1430 if (r & RT2860_TX_RX_COHERENT) 1431 rt2860_intr_coherent(sc); 1432 1433 if (r & RT2860_MAC_INT_2) /* TX status */ 1434 rt2860_drain_stats_fifo(sc); 1435 1436 if (r & RT2860_TX_DONE_INT5) 1437 rt2860_tx_intr(sc, 5); 1438 1439 if (r & RT2860_RX_DONE_INT) 1440 rt2860_rx_intr(sc); 1441 1442 if (r & RT2860_TX_DONE_INT4) 1443 rt2860_tx_intr(sc, 4); 1444 1445 if (r & RT2860_TX_DONE_INT3) 1446 rt2860_tx_intr(sc, 3); 1447 1448 if (r & RT2860_TX_DONE_INT2) 1449 rt2860_tx_intr(sc, 2); 1450 1451 if (r & RT2860_TX_DONE_INT1) 1452 rt2860_tx_intr(sc, 1); 1453 1454 if (r & RT2860_TX_DONE_INT0) 1455 rt2860_tx_intr(sc, 0); 1456 1457 if (r & RT2860_MAC_INT_0) /* TBTT */ 1458 rt2860_tbtt_intr(sc); 1459 1460 if (r & RT2860_MAC_INT_3) /* Auto wakeup */ 1461 /* TBD wakeup */; 1462 1463 if (r & RT2860_MAC_INT_4) /* GP timer */ 1464 rt2860_gp_intr(sc); 1465 1466 RAL_UNLOCK(sc); 1467 } 1468 1469 static int 1470 rt2860_tx(struct rt2860_softc *sc, struct mbuf *m, struct ieee80211_node *ni) 1471 { 1472 struct ifnet *ifp = sc->sc_ifp; 1473 struct ieee80211com *ic = ifp->if_l2com; 1474 struct ieee80211vap *vap = ni->ni_vap; 1475 struct rt2860_tx_ring *ring; 1476 struct rt2860_tx_data *data; 1477 struct rt2860_txd *txd; 1478 struct rt2860_txwi *txwi; 1479 struct ieee80211_frame *wh; 1480 const struct ieee80211_txparam *tp; 1481 struct ieee80211_key *k; 1482 struct mbuf *m1; 1483 bus_dma_segment_t segs[RT2860_MAX_SCATTER]; 1484 bus_dma_segment_t *seg; 1485 u_int hdrlen; 1486 uint16_t qos, dur; 1487 uint8_t type, qsel, mcs, pid, tid, qid; 1488 int i, nsegs, ntxds, pad, rate, ridx, error; 1489 1490 /* the data pool contains at least one element, pick the first */ 1491 data = SLIST_FIRST(&sc->data_pool); 1492 1493 wh = mtod(m, struct ieee80211_frame *); 1494 1495 if (wh->i_fc[1] & IEEE80211_FC1_WEP) { 1496 k = ieee80211_crypto_encap(ni, m); 1497 if (k == NULL) { 1498 m_freem(m); 1499 return ENOBUFS; 1500 } 1501 1502 /* packet header may have moved, reset our local pointer */ 1503 wh = mtod(m, struct ieee80211_frame *); 1504 } 1505 1506 hdrlen = ieee80211_anyhdrsize(wh); 1507 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; 1508 1509 tp = &vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)]; 1510 if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1511 rate = tp->mcastrate; 1512 } else if (m->m_flags & M_EAPOL) { 1513 rate = tp->mgmtrate; 1514 } else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) { 1515 rate = tp->ucastrate; 1516 } else { 1517 (void) ieee80211_ratectl_rate(ni, NULL, 0); 1518 rate = ni->ni_txrate; 1519 } 1520 rate &= IEEE80211_RATE_VAL; 1521 1522 qid = M_WME_GETAC(m); 1523 if (IEEE80211_QOS_HAS_SEQ(wh)) { 1524 qos = ((const struct ieee80211_qosframe *)wh)->i_qos[0]; 1525 tid = qos & IEEE80211_QOS_TID; 1526 } else { 1527 qos = 0; 1528 tid = 0; 1529 } 1530 ring = &sc->txq[qid]; 1531 ridx = ic->ic_rt->rateCodeToIndex[rate]; 1532 1533 /* get MCS code from rate index */ 1534 mcs = rt2860_rates[ridx].mcs; 1535 1536 /* setup TX Wireless Information */ 1537 txwi = data->txwi; 1538 txwi->flags = 0; 1539 /* let HW generate seq numbers for non-QoS frames */ 1540 txwi->xflags = qos ? 0 : RT2860_TX_NSEQ; 1541 if (type == IEEE80211_FC0_TYPE_DATA) 1542 txwi->wcid = IEEE80211_AID(ni->ni_associd); 1543 else 1544 txwi->wcid = 0xff; 1545 txwi->len = htole16(m->m_pkthdr.len); 1546 if (rt2860_rates[ridx].phy == IEEE80211_T_DS) { 1547 txwi->phy = htole16(RT2860_PHY_CCK); 1548 if (ridx != RT2860_RIDX_CCK1 && 1549 (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) 1550 mcs |= RT2860_PHY_SHPRE; 1551 } else 1552 txwi->phy = htole16(RT2860_PHY_OFDM); 1553 txwi->phy |= htole16(mcs); 1554 1555 /* 1556 * We store the MCS code into the driver-private PacketID field. 1557 * The PacketID is latched into TX_STAT_FIFO when Tx completes so 1558 * that we know at which initial rate the frame was transmitted. 1559 * We add 1 to the MCS code because setting the PacketID field to 1560 * 0 means that we don't want feedback in TX_STAT_FIFO. 1561 */ 1562 pid = (mcs + 1) & 0xf; 1563 txwi->len |= htole16(pid << RT2860_TX_PID_SHIFT); 1564 1565 /* check if RTS/CTS or CTS-to-self protection is required */ 1566 if (!IEEE80211_IS_MULTICAST(wh->i_addr1) && 1567 (m->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold || 1568 ((ic->ic_flags & IEEE80211_F_USEPROT) && 1569 rt2860_rates[ridx].phy == IEEE80211_T_OFDM))) 1570 txwi->txop = RT2860_TX_TXOP_HT; 1571 else 1572 txwi->txop = RT2860_TX_TXOP_BACKOFF; 1573 1574 if (!IEEE80211_IS_MULTICAST(wh->i_addr1) && 1575 (!qos || (qos & IEEE80211_QOS_ACKPOLICY) != 1576 IEEE80211_QOS_ACKPOLICY_NOACK)) { 1577 txwi->xflags |= RT2860_TX_ACK; 1578 1579 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 1580 dur = rt2860_rates[ridx].sp_ack_dur; 1581 else 1582 dur = rt2860_rates[ridx].lp_ack_dur; 1583 *(uint16_t *)wh->i_dur = htole16(dur); 1584 } 1585 /* ask MAC to insert timestamp into probe responses */ 1586 if ((wh->i_fc[0] & 1587 (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == 1588 (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP)) 1589 /* NOTE: beacons do not pass through tx_data() */ 1590 txwi->flags |= RT2860_TX_TS; 1591 1592 if (ieee80211_radiotap_active_vap(vap)) { 1593 struct rt2860_tx_radiotap_header *tap = &sc->sc_txtap; 1594 1595 tap->wt_flags = 0; 1596 tap->wt_rate = rate; 1597 if (mcs & RT2860_PHY_SHPRE) 1598 tap->wt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; 1599 1600 ieee80211_radiotap_tx(vap, m); 1601 } 1602 1603 pad = (hdrlen + 3) & ~3; 1604 1605 /* copy and trim 802.11 header */ 1606 memcpy(txwi + 1, wh, hdrlen); 1607 m_adj(m, hdrlen); 1608 1609 error = bus_dmamap_load_mbuf_sg(sc->txwi_dmat, data->map, m, segs, 1610 &nsegs, 0); 1611 if (__predict_false(error != 0 && error != EFBIG)) { 1612 device_printf(sc->sc_dev, "can't map mbuf (error %d)\n", 1613 error); 1614 m_freem(m); 1615 return error; 1616 } 1617 if (__predict_true(error == 0)) { 1618 /* determine how many TXDs are required */ 1619 ntxds = 1 + (nsegs / 2); 1620 1621 if (ring->queued + ntxds >= RT2860_TX_RING_COUNT) { 1622 /* not enough free TXDs, force mbuf defrag */ 1623 bus_dmamap_unload(sc->txwi_dmat, data->map); 1624 error = EFBIG; 1625 } 1626 } 1627 if (__predict_false(error != 0)) { 1628 m1 = m_defrag(m, M_NOWAIT); 1629 if (m1 == NULL) { 1630 device_printf(sc->sc_dev, 1631 "could not defragment mbuf\n"); 1632 m_freem(m); 1633 return ENOBUFS; 1634 } 1635 m = m1; 1636 1637 error = bus_dmamap_load_mbuf_sg(sc->txwi_dmat, data->map, m, 1638 segs, &nsegs, 0); 1639 if (__predict_false(error != 0)) { 1640 device_printf(sc->sc_dev, "can't map mbuf (error %d)\n", 1641 error); 1642 m_freem(m); 1643 return error; 1644 } 1645 1646 /* determine how many TXDs are now required */ 1647 ntxds = 1 + (nsegs / 2); 1648 1649 if (ring->queued + ntxds >= RT2860_TX_RING_COUNT) { 1650 /* this is a hopeless case, drop the mbuf! */ 1651 bus_dmamap_unload(sc->txwi_dmat, data->map); 1652 m_freem(m); 1653 return ENOBUFS; 1654 } 1655 } 1656 1657 qsel = (qid < WME_NUM_AC) ? RT2860_TX_QSEL_EDCA : RT2860_TX_QSEL_MGMT; 1658 1659 /* first segment is TXWI + 802.11 header */ 1660 txd = &ring->txd[ring->cur]; 1661 txd->sdp0 = htole32(data->paddr); 1662 txd->sdl0 = htole16(sizeof (struct rt2860_txwi) + pad); 1663 txd->flags = qsel; 1664 1665 /* setup payload segments */ 1666 seg = &segs[0]; 1667 for (i = nsegs; i >= 2; i -= 2) { 1668 txd->sdp1 = htole32(seg->ds_addr); 1669 txd->sdl1 = htole16(seg->ds_len); 1670 seg++; 1671 ring->cur = (ring->cur + 1) % RT2860_TX_RING_COUNT; 1672 /* grab a new Tx descriptor */ 1673 txd = &ring->txd[ring->cur]; 1674 txd->sdp0 = htole32(seg->ds_addr); 1675 txd->sdl0 = htole16(seg->ds_len); 1676 txd->flags = qsel; 1677 seg++; 1678 } 1679 /* finalize last segment */ 1680 if (i > 0) { 1681 txd->sdp1 = htole32(seg->ds_addr); 1682 txd->sdl1 = htole16(seg->ds_len | RT2860_TX_LS1); 1683 } else { 1684 txd->sdl0 |= htole16(RT2860_TX_LS0); 1685 txd->sdl1 = 0; 1686 } 1687 1688 /* remove from the free pool and link it into the SW Tx slot */ 1689 SLIST_REMOVE_HEAD(&sc->data_pool, next); 1690 data->m = m; 1691 data->ni = ni; 1692 ring->data[ring->cur] = data; 1693 1694 bus_dmamap_sync(sc->txwi_dmat, sc->txwi_map, BUS_DMASYNC_PREWRITE); 1695 bus_dmamap_sync(sc->txwi_dmat, data->map, BUS_DMASYNC_PREWRITE); 1696 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 1697 1698 DPRINTFN(4, ("sending frame qid=%d wcid=%d nsegs=%d ridx=%d\n", 1699 qid, txwi->wcid, nsegs, ridx)); 1700 1701 ring->cur = (ring->cur + 1) % RT2860_TX_RING_COUNT; 1702 ring->queued += ntxds; 1703 if (ring->queued >= RT2860_TX_RING_COUNT) 1704 sc->qfullmsk |= 1 << qid; 1705 1706 /* kick Tx */ 1707 RAL_WRITE(sc, RT2860_TX_CTX_IDX(qid), ring->cur); 1708 1709 return 0; 1710 } 1711 1712 static int 1713 rt2860_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, 1714 const struct ieee80211_bpf_params *params) 1715 { 1716 struct ieee80211com *ic = ni->ni_ic; 1717 struct ifnet *ifp = ic->ic_ifp; 1718 struct rt2860_softc *sc = ifp->if_softc; 1719 int error; 1720 1721 RAL_LOCK(sc); 1722 1723 /* prevent management frames from being sent if we're not ready */ 1724 if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) { 1725 RAL_UNLOCK(sc); 1726 m_freem(m); 1727 ieee80211_free_node(ni); 1728 return ENETDOWN; 1729 } 1730 if (params == NULL) { 1731 /* 1732 * Legacy path; interpret frame contents to decide 1733 * precisely how to send the frame. 1734 */ 1735 error = rt2860_tx(sc, m, ni); 1736 } else { 1737 /* 1738 * Caller supplied explicit parameters to use in 1739 * sending the frame. 1740 */ 1741 error = rt2860_tx_raw(sc, m, ni, params); 1742 } 1743 if (error != 0) { 1744 /* NB: m is reclaimed on tx failure */ 1745 ieee80211_free_node(ni); 1746 ifp->if_oerrors++; 1747 } 1748 sc->sc_tx_timer = 5; 1749 RAL_UNLOCK(sc); 1750 return error; 1751 } 1752 1753 static int 1754 rt2860_tx_raw(struct rt2860_softc *sc, struct mbuf *m, 1755 struct ieee80211_node *ni, const struct ieee80211_bpf_params *params) 1756 { 1757 struct ifnet *ifp = sc->sc_ifp; 1758 struct ieee80211com *ic = ifp->if_l2com; 1759 struct ieee80211vap *vap = ni->ni_vap; 1760 struct rt2860_tx_ring *ring; 1761 struct rt2860_tx_data *data; 1762 struct rt2860_txd *txd; 1763 struct rt2860_txwi *txwi; 1764 struct ieee80211_frame *wh; 1765 struct mbuf *m1; 1766 bus_dma_segment_t segs[RT2860_MAX_SCATTER]; 1767 bus_dma_segment_t *seg; 1768 u_int hdrlen; 1769 uint16_t dur; 1770 uint8_t type, qsel, mcs, pid, tid, qid; 1771 int i, nsegs, ntxds, pad, rate, ridx, error; 1772 1773 /* the data pool contains at least one element, pick the first */ 1774 data = SLIST_FIRST(&sc->data_pool); 1775 1776 wh = mtod(m, struct ieee80211_frame *); 1777 hdrlen = ieee80211_hdrsize(wh); 1778 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; 1779 1780 /* Choose a TX rate index. */ 1781 rate = params->ibp_rate0; 1782 ridx = ic->ic_rt->rateCodeToIndex[rate]; 1783 if (ridx == (uint8_t)-1) { 1784 /* XXX fall back to mcast/mgmt rate? */ 1785 m_freem(m); 1786 return EINVAL; 1787 } 1788 1789 qid = params->ibp_pri & 3; 1790 tid = 0; 1791 ring = &sc->txq[qid]; 1792 1793 /* get MCS code from rate index */ 1794 mcs = rt2860_rates[ridx].mcs; 1795 1796 /* setup TX Wireless Information */ 1797 txwi = data->txwi; 1798 txwi->flags = 0; 1799 /* let HW generate seq numbers for non-QoS frames */ 1800 txwi->xflags = params->ibp_pri & 3 ? 0 : RT2860_TX_NSEQ; 1801 txwi->wcid = 0xff; 1802 txwi->len = htole16(m->m_pkthdr.len); 1803 if (rt2860_rates[ridx].phy == IEEE80211_T_DS) { 1804 txwi->phy = htole16(RT2860_PHY_CCK); 1805 if (ridx != RT2860_RIDX_CCK1 && 1806 (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) 1807 mcs |= RT2860_PHY_SHPRE; 1808 } else 1809 txwi->phy = htole16(RT2860_PHY_OFDM); 1810 txwi->phy |= htole16(mcs); 1811 1812 /* 1813 * We store the MCS code into the driver-private PacketID field. 1814 * The PacketID is latched into TX_STAT_FIFO when Tx completes so 1815 * that we know at which initial rate the frame was transmitted. 1816 * We add 1 to the MCS code because setting the PacketID field to 1817 * 0 means that we don't want feedback in TX_STAT_FIFO. 1818 */ 1819 pid = (mcs + 1) & 0xf; 1820 txwi->len |= htole16(pid << RT2860_TX_PID_SHIFT); 1821 1822 /* check if RTS/CTS or CTS-to-self protection is required */ 1823 if (params->ibp_flags & IEEE80211_BPF_RTS || 1824 params->ibp_flags & IEEE80211_BPF_CTS) 1825 txwi->txop = RT2860_TX_TXOP_HT; 1826 else 1827 txwi->txop = RT2860_TX_TXOP_BACKOFF; 1828 if ((params->ibp_flags & IEEE80211_BPF_NOACK) == 0) { 1829 txwi->xflags |= RT2860_TX_ACK; 1830 1831 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 1832 dur = rt2860_rates[ridx].sp_ack_dur; 1833 else 1834 dur = rt2860_rates[ridx].lp_ack_dur; 1835 *(uint16_t *)wh->i_dur = htole16(dur); 1836 } 1837 /* ask MAC to insert timestamp into probe responses */ 1838 if ((wh->i_fc[0] & 1839 (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == 1840 (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP)) 1841 /* NOTE: beacons do not pass through tx_data() */ 1842 txwi->flags |= RT2860_TX_TS; 1843 1844 if (ieee80211_radiotap_active_vap(vap)) { 1845 struct rt2860_tx_radiotap_header *tap = &sc->sc_txtap; 1846 1847 tap->wt_flags = 0; 1848 tap->wt_rate = rate; 1849 if (mcs & RT2860_PHY_SHPRE) 1850 tap->wt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; 1851 1852 ieee80211_radiotap_tx(vap, m); 1853 } 1854 1855 pad = (hdrlen + 3) & ~3; 1856 1857 /* copy and trim 802.11 header */ 1858 memcpy(txwi + 1, wh, hdrlen); 1859 m_adj(m, hdrlen); 1860 1861 error = bus_dmamap_load_mbuf_sg(sc->txwi_dmat, data->map, m, segs, 1862 &nsegs, 0); 1863 if (__predict_false(error != 0 && error != EFBIG)) { 1864 device_printf(sc->sc_dev, "can't map mbuf (error %d)\n", 1865 error); 1866 m_freem(m); 1867 return error; 1868 } 1869 if (__predict_true(error == 0)) { 1870 /* determine how many TXDs are required */ 1871 ntxds = 1 + (nsegs / 2); 1872 1873 if (ring->queued + ntxds >= RT2860_TX_RING_COUNT) { 1874 /* not enough free TXDs, force mbuf defrag */ 1875 bus_dmamap_unload(sc->txwi_dmat, data->map); 1876 error = EFBIG; 1877 } 1878 } 1879 if (__predict_false(error != 0)) { 1880 m1 = m_defrag(m, M_NOWAIT); 1881 if (m1 == NULL) { 1882 device_printf(sc->sc_dev, 1883 "could not defragment mbuf\n"); 1884 m_freem(m); 1885 return ENOBUFS; 1886 } 1887 m = m1; 1888 1889 error = bus_dmamap_load_mbuf_sg(sc->txwi_dmat, data->map, m, 1890 segs, &nsegs, 0); 1891 if (__predict_false(error != 0)) { 1892 device_printf(sc->sc_dev, "can't map mbuf (error %d)\n", 1893 error); 1894 m_freem(m); 1895 return error; 1896 } 1897 1898 /* determine how many TXDs are now required */ 1899 ntxds = 1 + (nsegs / 2); 1900 1901 if (ring->queued + ntxds >= RT2860_TX_RING_COUNT) { 1902 /* this is a hopeless case, drop the mbuf! */ 1903 bus_dmamap_unload(sc->txwi_dmat, data->map); 1904 m_freem(m); 1905 return ENOBUFS; 1906 } 1907 } 1908 1909 qsel = (qid < WME_NUM_AC) ? RT2860_TX_QSEL_EDCA : RT2860_TX_QSEL_MGMT; 1910 1911 /* first segment is TXWI + 802.11 header */ 1912 txd = &ring->txd[ring->cur]; 1913 txd->sdp0 = htole32(data->paddr); 1914 txd->sdl0 = htole16(sizeof (struct rt2860_txwi) + pad); 1915 txd->flags = qsel; 1916 1917 /* setup payload segments */ 1918 seg = &segs[0]; 1919 for (i = nsegs; i >= 2; i -= 2) { 1920 txd->sdp1 = htole32(seg->ds_addr); 1921 txd->sdl1 = htole16(seg->ds_len); 1922 seg++; 1923 ring->cur = (ring->cur + 1) % RT2860_TX_RING_COUNT; 1924 /* grab a new Tx descriptor */ 1925 txd = &ring->txd[ring->cur]; 1926 txd->sdp0 = htole32(seg->ds_addr); 1927 txd->sdl0 = htole16(seg->ds_len); 1928 txd->flags = qsel; 1929 seg++; 1930 } 1931 /* finalize last segment */ 1932 if (i > 0) { 1933 txd->sdp1 = htole32(seg->ds_addr); 1934 txd->sdl1 = htole16(seg->ds_len | RT2860_TX_LS1); 1935 } else { 1936 txd->sdl0 |= htole16(RT2860_TX_LS0); 1937 txd->sdl1 = 0; 1938 } 1939 1940 /* remove from the free pool and link it into the SW Tx slot */ 1941 SLIST_REMOVE_HEAD(&sc->data_pool, next); 1942 data->m = m; 1943 data->ni = ni; 1944 ring->data[ring->cur] = data; 1945 1946 bus_dmamap_sync(sc->txwi_dmat, sc->txwi_map, BUS_DMASYNC_PREWRITE); 1947 bus_dmamap_sync(sc->txwi_dmat, data->map, BUS_DMASYNC_PREWRITE); 1948 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 1949 1950 DPRINTFN(4, ("sending frame qid=%d wcid=%d nsegs=%d ridx=%d\n", 1951 qid, txwi->wcid, nsegs, ridx)); 1952 1953 ring->cur = (ring->cur + 1) % RT2860_TX_RING_COUNT; 1954 ring->queued += ntxds; 1955 if (ring->queued >= RT2860_TX_RING_COUNT) 1956 sc->qfullmsk |= 1 << qid; 1957 1958 /* kick Tx */ 1959 RAL_WRITE(sc, RT2860_TX_CTX_IDX(qid), ring->cur); 1960 1961 return 0; 1962 } 1963 1964 static void 1965 rt2860_start(struct ifnet *ifp) 1966 { 1967 struct rt2860_softc *sc = ifp->if_softc; 1968 1969 RAL_LOCK(sc); 1970 rt2860_start_locked(ifp); 1971 RAL_UNLOCK(sc); 1972 } 1973 1974 static void 1975 rt2860_start_locked(struct ifnet *ifp) 1976 { 1977 struct rt2860_softc *sc = ifp->if_softc; 1978 struct ieee80211_node *ni; 1979 struct mbuf *m; 1980 1981 RAL_LOCK_ASSERT(sc); 1982 1983 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0 || 1984 (ifp->if_drv_flags & IFF_DRV_OACTIVE)) 1985 return; 1986 1987 for (;;) { 1988 if (SLIST_EMPTY(&sc->data_pool) || sc->qfullmsk != 0) { 1989 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 1990 break; 1991 } 1992 IFQ_DRV_DEQUEUE(&ifp->if_snd, m); 1993 if (m == NULL) 1994 break; 1995 ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; 1996 if (rt2860_tx(sc, m, ni) != 0) { 1997 ieee80211_free_node(ni); 1998 ifp->if_oerrors++; 1999 continue; 2000 } 2001 sc->sc_tx_timer = 5; 2002 } 2003 } 2004 2005 static void 2006 rt2860_watchdog(void *arg) 2007 { 2008 struct rt2860_softc *sc = arg; 2009 struct ifnet *ifp = sc->sc_ifp; 2010 2011 RAL_LOCK_ASSERT(sc); 2012 2013 KASSERT(ifp->if_drv_flags & IFF_DRV_RUNNING, ("not running")); 2014 2015 if (sc->sc_invalid) /* card ejected */ 2016 return; 2017 2018 if (sc->sc_tx_timer > 0 && --sc->sc_tx_timer == 0) { 2019 if_printf(ifp, "device timeout\n"); 2020 rt2860_stop_locked(sc); 2021 rt2860_init_locked(sc); 2022 ifp->if_oerrors++; 2023 return; 2024 } 2025 callout_reset(&sc->watchdog_ch, hz, rt2860_watchdog, sc); 2026 } 2027 2028 static int 2029 rt2860_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) 2030 { 2031 struct rt2860_softc *sc = ifp->if_softc; 2032 struct ieee80211com *ic = ifp->if_l2com; 2033 struct ifreq *ifr = (struct ifreq *)data; 2034 int error = 0, startall = 0; 2035 2036 switch (cmd) { 2037 case SIOCSIFFLAGS: 2038 RAL_LOCK(sc); 2039 if (ifp->if_flags & IFF_UP) { 2040 if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) { 2041 rt2860_init_locked(sc); 2042 startall = 1; 2043 } else 2044 rt2860_update_promisc(ifp); 2045 } else { 2046 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 2047 rt2860_stop_locked(sc); 2048 } 2049 RAL_UNLOCK(sc); 2050 if (startall) 2051 ieee80211_start_all(ic); 2052 break; 2053 case SIOCGIFMEDIA: 2054 error = ifmedia_ioctl(ifp, ifr, &ic->ic_media, cmd); 2055 break; 2056 case SIOCSIFADDR: 2057 error = ether_ioctl(ifp, cmd, data); 2058 break; 2059 default: 2060 error = EINVAL; 2061 break; 2062 } 2063 return error; 2064 } 2065 2066 /* 2067 * Reading and writing from/to the BBP is different from RT2560 and RT2661. 2068 * We access the BBP through the 8051 microcontroller unit which means that 2069 * the microcode must be loaded first. 2070 */ 2071 void 2072 rt2860_mcu_bbp_write(struct rt2860_softc *sc, uint8_t reg, uint8_t val) 2073 { 2074 int ntries; 2075 2076 for (ntries = 0; ntries < 100; ntries++) { 2077 if (!(RAL_READ(sc, RT2860_H2M_BBPAGENT) & RT2860_BBP_CSR_KICK)) 2078 break; 2079 DELAY(1); 2080 } 2081 if (ntries == 100) { 2082 device_printf(sc->sc_dev, 2083 "could not write to BBP through MCU\n"); 2084 return; 2085 } 2086 2087 RAL_WRITE(sc, RT2860_H2M_BBPAGENT, RT2860_BBP_RW_PARALLEL | 2088 RT2860_BBP_CSR_KICK | reg << 8 | val); 2089 RAL_BARRIER_WRITE(sc); 2090 2091 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_BBP, 0, 0); 2092 DELAY(1000); 2093 } 2094 2095 uint8_t 2096 rt2860_mcu_bbp_read(struct rt2860_softc *sc, uint8_t reg) 2097 { 2098 uint32_t val; 2099 int ntries; 2100 2101 for (ntries = 0; ntries < 100; ntries++) { 2102 if (!(RAL_READ(sc, RT2860_H2M_BBPAGENT) & RT2860_BBP_CSR_KICK)) 2103 break; 2104 DELAY(1); 2105 } 2106 if (ntries == 100) { 2107 device_printf(sc->sc_dev, 2108 "could not read from BBP through MCU\n"); 2109 return 0; 2110 } 2111 2112 RAL_WRITE(sc, RT2860_H2M_BBPAGENT, RT2860_BBP_RW_PARALLEL | 2113 RT2860_BBP_CSR_KICK | RT2860_BBP_CSR_READ | reg << 8); 2114 RAL_BARRIER_WRITE(sc); 2115 2116 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_BBP, 0, 0); 2117 DELAY(1000); 2118 2119 for (ntries = 0; ntries < 100; ntries++) { 2120 val = RAL_READ(sc, RT2860_H2M_BBPAGENT); 2121 if (!(val & RT2860_BBP_CSR_KICK)) 2122 return val & 0xff; 2123 DELAY(1); 2124 } 2125 device_printf(sc->sc_dev, "could not read from BBP through MCU\n"); 2126 2127 return 0; 2128 } 2129 2130 /* 2131 * Write to one of the 4 programmable 24-bit RF registers. 2132 */ 2133 static void 2134 rt2860_rf_write(struct rt2860_softc *sc, uint8_t reg, uint32_t val) 2135 { 2136 uint32_t tmp; 2137 int ntries; 2138 2139 for (ntries = 0; ntries < 100; ntries++) { 2140 if (!(RAL_READ(sc, RT2860_RF_CSR_CFG0) & RT2860_RF_REG_CTRL)) 2141 break; 2142 DELAY(1); 2143 } 2144 if (ntries == 100) { 2145 device_printf(sc->sc_dev, "could not write to RF\n"); 2146 return; 2147 } 2148 2149 /* RF registers are 24-bit on the RT2860 */ 2150 tmp = RT2860_RF_REG_CTRL | 24 << RT2860_RF_REG_WIDTH_SHIFT | 2151 (val & 0x3fffff) << 2 | (reg & 3); 2152 RAL_WRITE(sc, RT2860_RF_CSR_CFG0, tmp); 2153 } 2154 2155 static uint8_t 2156 rt3090_rf_read(struct rt2860_softc *sc, uint8_t reg) 2157 { 2158 uint32_t tmp; 2159 int ntries; 2160 2161 for (ntries = 0; ntries < 100; ntries++) { 2162 if (!(RAL_READ(sc, RT3070_RF_CSR_CFG) & RT3070_RF_KICK)) 2163 break; 2164 DELAY(1); 2165 } 2166 if (ntries == 100) { 2167 device_printf(sc->sc_dev, "could not read RF register\n"); 2168 return 0xff; 2169 } 2170 tmp = RT3070_RF_KICK | reg << 8; 2171 RAL_WRITE(sc, RT3070_RF_CSR_CFG, tmp); 2172 2173 for (ntries = 0; ntries < 100; ntries++) { 2174 tmp = RAL_READ(sc, RT3070_RF_CSR_CFG); 2175 if (!(tmp & RT3070_RF_KICK)) 2176 break; 2177 DELAY(1); 2178 } 2179 if (ntries == 100) { 2180 device_printf(sc->sc_dev, "could not read RF register\n"); 2181 return 0xff; 2182 } 2183 return tmp & 0xff; 2184 } 2185 2186 void 2187 rt3090_rf_write(struct rt2860_softc *sc, uint8_t reg, uint8_t val) 2188 { 2189 uint32_t tmp; 2190 int ntries; 2191 2192 for (ntries = 0; ntries < 10; ntries++) { 2193 if (!(RAL_READ(sc, RT3070_RF_CSR_CFG) & RT3070_RF_KICK)) 2194 break; 2195 DELAY(10); 2196 } 2197 if (ntries == 10) { 2198 device_printf(sc->sc_dev, "could not write to RF\n"); 2199 return; 2200 } 2201 2202 tmp = RT3070_RF_WRITE | RT3070_RF_KICK | reg << 8 | val; 2203 RAL_WRITE(sc, RT3070_RF_CSR_CFG, tmp); 2204 } 2205 2206 /* 2207 * Send a command to the 8051 microcontroller unit. 2208 */ 2209 int 2210 rt2860_mcu_cmd(struct rt2860_softc *sc, uint8_t cmd, uint16_t arg, int wait) 2211 { 2212 int slot, ntries; 2213 uint32_t tmp; 2214 uint8_t cid; 2215 2216 for (ntries = 0; ntries < 100; ntries++) { 2217 if (!(RAL_READ(sc, RT2860_H2M_MAILBOX) & RT2860_H2M_BUSY)) 2218 break; 2219 DELAY(2); 2220 } 2221 if (ntries == 100) 2222 return EIO; 2223 2224 cid = wait ? cmd : RT2860_TOKEN_NO_INTR; 2225 RAL_WRITE(sc, RT2860_H2M_MAILBOX, RT2860_H2M_BUSY | cid << 16 | arg); 2226 RAL_BARRIER_WRITE(sc); 2227 RAL_WRITE(sc, RT2860_HOST_CMD, cmd); 2228 2229 if (!wait) 2230 return 0; 2231 /* wait for the command to complete */ 2232 for (ntries = 0; ntries < 200; ntries++) { 2233 tmp = RAL_READ(sc, RT2860_H2M_MAILBOX_CID); 2234 /* find the command slot */ 2235 for (slot = 0; slot < 4; slot++, tmp >>= 8) 2236 if ((tmp & 0xff) == cid) 2237 break; 2238 if (slot < 4) 2239 break; 2240 DELAY(100); 2241 } 2242 if (ntries == 200) { 2243 /* clear command and status */ 2244 RAL_WRITE(sc, RT2860_H2M_MAILBOX_STATUS, 0xffffffff); 2245 RAL_WRITE(sc, RT2860_H2M_MAILBOX_CID, 0xffffffff); 2246 return ETIMEDOUT; 2247 } 2248 /* get command status (1 means success) */ 2249 tmp = RAL_READ(sc, RT2860_H2M_MAILBOX_STATUS); 2250 tmp = (tmp >> (slot * 8)) & 0xff; 2251 DPRINTF(("MCU command=0x%02x slot=%d status=0x%02x\n", 2252 cmd, slot, tmp)); 2253 /* clear command and status */ 2254 RAL_WRITE(sc, RT2860_H2M_MAILBOX_STATUS, 0xffffffff); 2255 RAL_WRITE(sc, RT2860_H2M_MAILBOX_CID, 0xffffffff); 2256 return (tmp == 1) ? 0 : EIO; 2257 } 2258 2259 static void 2260 rt2860_enable_mrr(struct rt2860_softc *sc) 2261 { 2262 #define CCK(mcs) (mcs) 2263 #define OFDM(mcs) (1 << 3 | (mcs)) 2264 RAL_WRITE(sc, RT2860_LG_FBK_CFG0, 2265 OFDM(6) << 28 | /* 54->48 */ 2266 OFDM(5) << 24 | /* 48->36 */ 2267 OFDM(4) << 20 | /* 36->24 */ 2268 OFDM(3) << 16 | /* 24->18 */ 2269 OFDM(2) << 12 | /* 18->12 */ 2270 OFDM(1) << 8 | /* 12-> 9 */ 2271 OFDM(0) << 4 | /* 9-> 6 */ 2272 OFDM(0)); /* 6-> 6 */ 2273 2274 RAL_WRITE(sc, RT2860_LG_FBK_CFG1, 2275 CCK(2) << 12 | /* 11->5.5 */ 2276 CCK(1) << 8 | /* 5.5-> 2 */ 2277 CCK(0) << 4 | /* 2-> 1 */ 2278 CCK(0)); /* 1-> 1 */ 2279 #undef OFDM 2280 #undef CCK 2281 } 2282 2283 static void 2284 rt2860_set_txpreamble(struct rt2860_softc *sc) 2285 { 2286 struct ifnet *ifp = sc->sc_ifp; 2287 struct ieee80211com *ic = ifp->if_l2com; 2288 uint32_t tmp; 2289 2290 tmp = RAL_READ(sc, RT2860_AUTO_RSP_CFG); 2291 tmp &= ~RT2860_CCK_SHORT_EN; 2292 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 2293 tmp |= RT2860_CCK_SHORT_EN; 2294 RAL_WRITE(sc, RT2860_AUTO_RSP_CFG, tmp); 2295 } 2296 2297 void 2298 rt2860_set_basicrates(struct rt2860_softc *sc, 2299 const struct ieee80211_rateset *rs) 2300 { 2301 #define RV(r) ((r) & IEEE80211_RATE_VAL) 2302 struct ifnet *ifp = sc->sc_ifp; 2303 struct ieee80211com *ic = ifp->if_l2com; 2304 uint32_t mask = 0; 2305 uint8_t rate; 2306 int i; 2307 2308 for (i = 0; i < rs->rs_nrates; i++) { 2309 rate = rs->rs_rates[i]; 2310 2311 if (!(rate & IEEE80211_RATE_BASIC)) 2312 continue; 2313 2314 mask |= 1 << ic->ic_rt->rateCodeToIndex[RV(rate)]; 2315 } 2316 2317 RAL_WRITE(sc, RT2860_LEGACY_BASIC_RATE, mask); 2318 #undef RV 2319 } 2320 2321 static void 2322 rt2860_scan_start(struct ieee80211com *ic) 2323 { 2324 struct ifnet *ifp = ic->ic_ifp; 2325 struct rt2860_softc *sc = ifp->if_softc; 2326 uint32_t tmp; 2327 2328 tmp = RAL_READ(sc, RT2860_BCN_TIME_CFG); 2329 RAL_WRITE(sc, RT2860_BCN_TIME_CFG, 2330 tmp & ~(RT2860_BCN_TX_EN | RT2860_TSF_TIMER_EN | 2331 RT2860_TBTT_TIMER_EN)); 2332 rt2860_set_gp_timer(sc, 0); 2333 } 2334 2335 static void 2336 rt2860_scan_end(struct ieee80211com *ic) 2337 { 2338 struct ifnet *ifp = ic->ic_ifp; 2339 struct rt2860_softc *sc = ifp->if_softc; 2340 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2341 2342 if (vap->iv_state == IEEE80211_S_RUN) { 2343 rt2860_enable_tsf_sync(sc); 2344 rt2860_set_gp_timer(sc, 500); 2345 } 2346 } 2347 2348 static void 2349 rt2860_set_channel(struct ieee80211com *ic) 2350 { 2351 struct ifnet *ifp = ic->ic_ifp; 2352 struct rt2860_softc *sc = ifp->if_softc; 2353 2354 RAL_LOCK(sc); 2355 rt2860_switch_chan(sc, ic->ic_curchan); 2356 RAL_UNLOCK(sc); 2357 } 2358 2359 static void 2360 rt2860_select_chan_group(struct rt2860_softc *sc, int group) 2361 { 2362 uint32_t tmp; 2363 uint8_t agc; 2364 2365 rt2860_mcu_bbp_write(sc, 62, 0x37 - sc->lna[group]); 2366 rt2860_mcu_bbp_write(sc, 63, 0x37 - sc->lna[group]); 2367 rt2860_mcu_bbp_write(sc, 64, 0x37 - sc->lna[group]); 2368 rt2860_mcu_bbp_write(sc, 86, 0x00); 2369 2370 if (group == 0) { 2371 if (sc->ext_2ghz_lna) { 2372 rt2860_mcu_bbp_write(sc, 82, 0x62); 2373 rt2860_mcu_bbp_write(sc, 75, 0x46); 2374 } else { 2375 rt2860_mcu_bbp_write(sc, 82, 0x84); 2376 rt2860_mcu_bbp_write(sc, 75, 0x50); 2377 } 2378 } else { 2379 if (sc->ext_5ghz_lna) { 2380 rt2860_mcu_bbp_write(sc, 82, 0xf2); 2381 rt2860_mcu_bbp_write(sc, 75, 0x46); 2382 } else { 2383 rt2860_mcu_bbp_write(sc, 82, 0xf2); 2384 rt2860_mcu_bbp_write(sc, 75, 0x50); 2385 } 2386 } 2387 2388 tmp = RAL_READ(sc, RT2860_TX_BAND_CFG); 2389 tmp &= ~(RT2860_5G_BAND_SEL_N | RT2860_5G_BAND_SEL_P); 2390 tmp |= (group == 0) ? RT2860_5G_BAND_SEL_N : RT2860_5G_BAND_SEL_P; 2391 RAL_WRITE(sc, RT2860_TX_BAND_CFG, tmp); 2392 2393 /* enable appropriate Power Amplifiers and Low Noise Amplifiers */ 2394 tmp = RT2860_RFTR_EN | RT2860_TRSW_EN | RT2860_LNA_PE0_EN; 2395 if (sc->nrxchains > 1) 2396 tmp |= RT2860_LNA_PE1_EN; 2397 if (sc->mac_ver == 0x3593 && sc->nrxchains > 2) 2398 tmp |= RT3593_LNA_PE2_EN; 2399 if (group == 0) { /* 2GHz */ 2400 tmp |= RT2860_PA_PE_G0_EN; 2401 if (sc->ntxchains > 1) 2402 tmp |= RT2860_PA_PE_G1_EN; 2403 if (sc->mac_ver == 0x3593 && sc->ntxchains > 2) 2404 tmp |= RT3593_PA_PE_G2_EN; 2405 } else { /* 5GHz */ 2406 tmp |= RT2860_PA_PE_A0_EN; 2407 if (sc->ntxchains > 1) 2408 tmp |= RT2860_PA_PE_A1_EN; 2409 if (sc->mac_ver == 0x3593 && sc->ntxchains > 2) 2410 tmp |= RT3593_PA_PE_A2_EN; 2411 } 2412 RAL_WRITE(sc, RT2860_TX_PIN_CFG, tmp); 2413 2414 if (sc->mac_ver == 0x3593) { 2415 tmp = RAL_READ(sc, RT2860_GPIO_CTRL); 2416 if (sc->sc_flags & RT2860_PCIE) { 2417 tmp &= ~0x01010000; 2418 if (group == 0) 2419 tmp |= 0x00010000; 2420 } else { 2421 tmp &= ~0x00008080; 2422 if (group == 0) 2423 tmp |= 0x00000080; 2424 } 2425 tmp = (tmp & ~0x00001000) | 0x00000010; 2426 RAL_WRITE(sc, RT2860_GPIO_CTRL, tmp); 2427 } 2428 2429 /* set initial AGC value */ 2430 if (group == 0) { /* 2GHz band */ 2431 if (sc->mac_ver >= 0x3071) 2432 agc = 0x1c + sc->lna[0] * 2; 2433 else 2434 agc = 0x2e + sc->lna[0]; 2435 } else { /* 5GHz band */ 2436 agc = 0x32 + (sc->lna[group] * 5) / 3; 2437 } 2438 rt2860_mcu_bbp_write(sc, 66, agc); 2439 2440 DELAY(1000); 2441 } 2442 2443 static void 2444 rt2860_set_chan(struct rt2860_softc *sc, u_int chan) 2445 { 2446 const struct rfprog *rfprog = rt2860_rf2850; 2447 uint32_t r2, r3, r4; 2448 int8_t txpow1, txpow2; 2449 u_int i; 2450 2451 /* find the settings for this channel (we know it exists) */ 2452 for (i = 0; rfprog[i].chan != chan; i++); 2453 2454 r2 = rfprog[i].r2; 2455 if (sc->ntxchains == 1) 2456 r2 |= 1 << 12; /* 1T: disable Tx chain 2 */ 2457 if (sc->nrxchains == 1) 2458 r2 |= 1 << 15 | 1 << 4; /* 1R: disable Rx chains 2 & 3 */ 2459 else if (sc->nrxchains == 2) 2460 r2 |= 1 << 4; /* 2R: disable Rx chain 3 */ 2461 2462 /* use Tx power values from EEPROM */ 2463 txpow1 = sc->txpow1[i]; 2464 txpow2 = sc->txpow2[i]; 2465 if (chan > 14) { 2466 if (txpow1 >= 0) 2467 txpow1 = txpow1 << 1 | 1; 2468 else 2469 txpow1 = (7 + txpow1) << 1; 2470 if (txpow2 >= 0) 2471 txpow2 = txpow2 << 1 | 1; 2472 else 2473 txpow2 = (7 + txpow2) << 1; 2474 } 2475 r3 = rfprog[i].r3 | txpow1 << 7; 2476 r4 = rfprog[i].r4 | sc->freq << 13 | txpow2 << 4; 2477 2478 rt2860_rf_write(sc, RT2860_RF1, rfprog[i].r1); 2479 rt2860_rf_write(sc, RT2860_RF2, r2); 2480 rt2860_rf_write(sc, RT2860_RF3, r3); 2481 rt2860_rf_write(sc, RT2860_RF4, r4); 2482 2483 DELAY(200); 2484 2485 rt2860_rf_write(sc, RT2860_RF1, rfprog[i].r1); 2486 rt2860_rf_write(sc, RT2860_RF2, r2); 2487 rt2860_rf_write(sc, RT2860_RF3, r3 | 1); 2488 rt2860_rf_write(sc, RT2860_RF4, r4); 2489 2490 DELAY(200); 2491 2492 rt2860_rf_write(sc, RT2860_RF1, rfprog[i].r1); 2493 rt2860_rf_write(sc, RT2860_RF2, r2); 2494 rt2860_rf_write(sc, RT2860_RF3, r3); 2495 rt2860_rf_write(sc, RT2860_RF4, r4); 2496 } 2497 2498 static void 2499 rt3090_set_chan(struct rt2860_softc *sc, u_int chan) 2500 { 2501 int8_t txpow1, txpow2; 2502 uint8_t rf; 2503 int i; 2504 2505 /* RT3090 is 2GHz only */ 2506 KASSERT(chan >= 1 && chan <= 14, ("chan %d not support", chan)); 2507 2508 /* find the settings for this channel (we know it exists) */ 2509 for (i = 0; rt2860_rf2850[i].chan != chan; i++); 2510 2511 /* use Tx power values from EEPROM */ 2512 txpow1 = sc->txpow1[i]; 2513 txpow2 = sc->txpow2[i]; 2514 2515 rt3090_rf_write(sc, 2, rt3090_freqs[i].n); 2516 rf = rt3090_rf_read(sc, 3); 2517 rf = (rf & ~0x0f) | rt3090_freqs[i].k; 2518 rt3090_rf_write(sc, 3, rf); 2519 rf = rt3090_rf_read(sc, 6); 2520 rf = (rf & ~0x03) | rt3090_freqs[i].r; 2521 rt3090_rf_write(sc, 6, rf); 2522 2523 /* set Tx0 power */ 2524 rf = rt3090_rf_read(sc, 12); 2525 rf = (rf & ~0x1f) | txpow1; 2526 rt3090_rf_write(sc, 12, rf); 2527 2528 /* set Tx1 power */ 2529 rf = rt3090_rf_read(sc, 13); 2530 rf = (rf & ~0x1f) | txpow2; 2531 rt3090_rf_write(sc, 13, rf); 2532 2533 rf = rt3090_rf_read(sc, 1); 2534 rf &= ~0xfc; 2535 if (sc->ntxchains == 1) 2536 rf |= RT3070_TX1_PD | RT3070_TX2_PD; 2537 else if (sc->ntxchains == 2) 2538 rf |= RT3070_TX2_PD; 2539 if (sc->nrxchains == 1) 2540 rf |= RT3070_RX1_PD | RT3070_RX2_PD; 2541 else if (sc->nrxchains == 2) 2542 rf |= RT3070_RX2_PD; 2543 rt3090_rf_write(sc, 1, rf); 2544 2545 /* set RF offset */ 2546 rf = rt3090_rf_read(sc, 23); 2547 rf = (rf & ~0x7f) | sc->freq; 2548 rt3090_rf_write(sc, 23, rf); 2549 2550 /* program RF filter */ 2551 rf = rt3090_rf_read(sc, 24); /* Tx */ 2552 rf = (rf & ~0x3f) | sc->rf24_20mhz; 2553 rt3090_rf_write(sc, 24, rf); 2554 rf = rt3090_rf_read(sc, 31); /* Rx */ 2555 rf = (rf & ~0x3f) | sc->rf24_20mhz; 2556 rt3090_rf_write(sc, 31, rf); 2557 2558 /* enable RF tuning */ 2559 rf = rt3090_rf_read(sc, 7); 2560 rt3090_rf_write(sc, 7, rf | RT3070_TUNE); 2561 } 2562 2563 static int 2564 rt3090_rf_init(struct rt2860_softc *sc) 2565 { 2566 #define N(a) (sizeof (a) / sizeof ((a)[0])) 2567 uint32_t tmp; 2568 uint8_t rf, bbp; 2569 int i; 2570 2571 rf = rt3090_rf_read(sc, 30); 2572 /* toggle RF R30 bit 7 */ 2573 rt3090_rf_write(sc, 30, rf | 0x80); 2574 DELAY(1000); 2575 rt3090_rf_write(sc, 30, rf & ~0x80); 2576 2577 tmp = RAL_READ(sc, RT3070_LDO_CFG0); 2578 tmp &= ~0x1f000000; 2579 if (sc->patch_dac && sc->mac_rev < 0x0211) 2580 tmp |= 0x0d000000; /* 1.35V */ 2581 else 2582 tmp |= 0x01000000; /* 1.2V */ 2583 RAL_WRITE(sc, RT3070_LDO_CFG0, tmp); 2584 2585 /* patch LNA_PE_G1 */ 2586 tmp = RAL_READ(sc, RT3070_GPIO_SWITCH); 2587 RAL_WRITE(sc, RT3070_GPIO_SWITCH, tmp & ~0x20); 2588 2589 /* initialize RF registers to default value */ 2590 for (i = 0; i < N(rt3090_def_rf); i++) { 2591 rt3090_rf_write(sc, rt3090_def_rf[i].reg, 2592 rt3090_def_rf[i].val); 2593 } 2594 2595 /* select 20MHz bandwidth */ 2596 rt3090_rf_write(sc, 31, 0x14); 2597 2598 rf = rt3090_rf_read(sc, 6); 2599 rt3090_rf_write(sc, 6, rf | 0x40); 2600 2601 if (sc->mac_ver != 0x3593) { 2602 /* calibrate filter for 20MHz bandwidth */ 2603 sc->rf24_20mhz = 0x1f; /* default value */ 2604 rt3090_filter_calib(sc, 0x07, 0x16, &sc->rf24_20mhz); 2605 2606 /* select 40MHz bandwidth */ 2607 bbp = rt2860_mcu_bbp_read(sc, 4); 2608 rt2860_mcu_bbp_write(sc, 4, (bbp & ~0x08) | 0x10); 2609 rf = rt3090_rf_read(sc, 31); 2610 rt3090_rf_write(sc, 31, rf | 0x20); 2611 2612 /* calibrate filter for 40MHz bandwidth */ 2613 sc->rf24_40mhz = 0x2f; /* default value */ 2614 rt3090_filter_calib(sc, 0x27, 0x19, &sc->rf24_40mhz); 2615 2616 /* go back to 20MHz bandwidth */ 2617 bbp = rt2860_mcu_bbp_read(sc, 4); 2618 rt2860_mcu_bbp_write(sc, 4, bbp & ~0x18); 2619 } 2620 if (sc->mac_rev < 0x0211) 2621 rt3090_rf_write(sc, 27, 0x03); 2622 2623 tmp = RAL_READ(sc, RT3070_OPT_14); 2624 RAL_WRITE(sc, RT3070_OPT_14, tmp | 1); 2625 2626 if (sc->rf_rev == RT3070_RF_3020) 2627 rt3090_set_rx_antenna(sc, 0); 2628 2629 bbp = rt2860_mcu_bbp_read(sc, 138); 2630 if (sc->mac_ver == 0x3593) { 2631 if (sc->ntxchains == 1) 2632 bbp |= 0x60; /* turn off DAC1 and DAC2 */ 2633 else if (sc->ntxchains == 2) 2634 bbp |= 0x40; /* turn off DAC2 */ 2635 if (sc->nrxchains == 1) 2636 bbp &= ~0x06; /* turn off ADC1 and ADC2 */ 2637 else if (sc->nrxchains == 2) 2638 bbp &= ~0x04; /* turn off ADC2 */ 2639 } else { 2640 if (sc->ntxchains == 1) 2641 bbp |= 0x20; /* turn off DAC1 */ 2642 if (sc->nrxchains == 1) 2643 bbp &= ~0x02; /* turn off ADC1 */ 2644 } 2645 rt2860_mcu_bbp_write(sc, 138, bbp); 2646 2647 rf = rt3090_rf_read(sc, 1); 2648 rf &= ~(RT3070_RX0_PD | RT3070_TX0_PD); 2649 rf |= RT3070_RF_BLOCK | RT3070_RX1_PD | RT3070_TX1_PD; 2650 rt3090_rf_write(sc, 1, rf); 2651 2652 rf = rt3090_rf_read(sc, 15); 2653 rt3090_rf_write(sc, 15, rf & ~RT3070_TX_LO2); 2654 2655 rf = rt3090_rf_read(sc, 17); 2656 rf &= ~RT3070_TX_LO1; 2657 if (sc->mac_rev >= 0x0211 && !sc->ext_2ghz_lna) 2658 rf |= 0x20; /* fix for long range Rx issue */ 2659 if (sc->txmixgain_2ghz >= 2) 2660 rf = (rf & ~0x7) | sc->txmixgain_2ghz; 2661 rt3090_rf_write(sc, 17, rf); 2662 2663 rf = rt3090_rf_read(sc, 20); 2664 rt3090_rf_write(sc, 20, rf & ~RT3070_RX_LO1); 2665 2666 rf = rt3090_rf_read(sc, 21); 2667 rt3090_rf_write(sc, 21, rf & ~RT3070_RX_LO2); 2668 2669 return 0; 2670 #undef N 2671 } 2672 2673 void 2674 rt3090_rf_wakeup(struct rt2860_softc *sc) 2675 { 2676 uint32_t tmp; 2677 uint8_t rf; 2678 2679 if (sc->mac_ver == 0x3593) { 2680 /* enable VCO */ 2681 rf = rt3090_rf_read(sc, 1); 2682 rt3090_rf_write(sc, 1, rf | RT3593_VCO); 2683 2684 /* initiate VCO calibration */ 2685 rf = rt3090_rf_read(sc, 3); 2686 rt3090_rf_write(sc, 3, rf | RT3593_VCOCAL); 2687 2688 /* enable VCO bias current control */ 2689 rf = rt3090_rf_read(sc, 6); 2690 rt3090_rf_write(sc, 6, rf | RT3593_VCO_IC); 2691 2692 /* initiate res calibration */ 2693 rf = rt3090_rf_read(sc, 2); 2694 rt3090_rf_write(sc, 2, rf | RT3593_RESCAL); 2695 2696 /* set reference current control to 0.33 mA */ 2697 rf = rt3090_rf_read(sc, 22); 2698 rf &= ~RT3593_CP_IC_MASK; 2699 rf |= 1 << RT3593_CP_IC_SHIFT; 2700 rt3090_rf_write(sc, 22, rf); 2701 2702 /* enable RX CTB */ 2703 rf = rt3090_rf_read(sc, 46); 2704 rt3090_rf_write(sc, 46, rf | RT3593_RX_CTB); 2705 2706 rf = rt3090_rf_read(sc, 20); 2707 rf &= ~(RT3593_LDO_RF_VC_MASK | RT3593_LDO_PLL_VC_MASK); 2708 rt3090_rf_write(sc, 20, rf); 2709 } else { 2710 /* enable RF block */ 2711 rf = rt3090_rf_read(sc, 1); 2712 rt3090_rf_write(sc, 1, rf | RT3070_RF_BLOCK); 2713 2714 /* enable VCO bias current control */ 2715 rf = rt3090_rf_read(sc, 7); 2716 rt3090_rf_write(sc, 7, rf | 0x30); 2717 2718 rf = rt3090_rf_read(sc, 9); 2719 rt3090_rf_write(sc, 9, rf | 0x0e); 2720 2721 /* enable RX CTB */ 2722 rf = rt3090_rf_read(sc, 21); 2723 rt3090_rf_write(sc, 21, rf | RT3070_RX_CTB); 2724 2725 /* fix Tx to Rx IQ glitch by raising RF voltage */ 2726 rf = rt3090_rf_read(sc, 27); 2727 rf &= ~0x77; 2728 if (sc->mac_rev < 0x0211) 2729 rf |= 0x03; 2730 rt3090_rf_write(sc, 27, rf); 2731 } 2732 if (sc->patch_dac && sc->mac_rev < 0x0211) { 2733 tmp = RAL_READ(sc, RT3070_LDO_CFG0); 2734 tmp = (tmp & ~0x1f000000) | 0x0d000000; 2735 RAL_WRITE(sc, RT3070_LDO_CFG0, tmp); 2736 } 2737 } 2738 2739 int 2740 rt3090_filter_calib(struct rt2860_softc *sc, uint8_t init, uint8_t target, 2741 uint8_t *val) 2742 { 2743 uint8_t rf22, rf24; 2744 uint8_t bbp55_pb, bbp55_sb, delta; 2745 int ntries; 2746 2747 /* program filter */ 2748 rf24 = rt3090_rf_read(sc, 24); 2749 rf24 = (rf24 & 0xc0) | init; /* initial filter value */ 2750 rt3090_rf_write(sc, 24, rf24); 2751 2752 /* enable baseband loopback mode */ 2753 rf22 = rt3090_rf_read(sc, 22); 2754 rt3090_rf_write(sc, 22, rf22 | RT3070_BB_LOOPBACK); 2755 2756 /* set power and frequency of passband test tone */ 2757 rt2860_mcu_bbp_write(sc, 24, 0x00); 2758 for (ntries = 0; ntries < 100; ntries++) { 2759 /* transmit test tone */ 2760 rt2860_mcu_bbp_write(sc, 25, 0x90); 2761 DELAY(1000); 2762 /* read received power */ 2763 bbp55_pb = rt2860_mcu_bbp_read(sc, 55); 2764 if (bbp55_pb != 0) 2765 break; 2766 } 2767 if (ntries == 100) 2768 return ETIMEDOUT; 2769 2770 /* set power and frequency of stopband test tone */ 2771 rt2860_mcu_bbp_write(sc, 24, 0x06); 2772 for (ntries = 0; ntries < 100; ntries++) { 2773 /* transmit test tone */ 2774 rt2860_mcu_bbp_write(sc, 25, 0x90); 2775 DELAY(1000); 2776 /* read received power */ 2777 bbp55_sb = rt2860_mcu_bbp_read(sc, 55); 2778 2779 delta = bbp55_pb - bbp55_sb; 2780 if (delta > target) 2781 break; 2782 2783 /* reprogram filter */ 2784 rf24++; 2785 rt3090_rf_write(sc, 24, rf24); 2786 } 2787 if (ntries < 100) { 2788 if (rf24 != init) 2789 rf24--; /* backtrack */ 2790 *val = rf24; 2791 rt3090_rf_write(sc, 24, rf24); 2792 } 2793 2794 /* restore initial state */ 2795 rt2860_mcu_bbp_write(sc, 24, 0x00); 2796 2797 /* disable baseband loopback mode */ 2798 rf22 = rt3090_rf_read(sc, 22); 2799 rt3090_rf_write(sc, 22, rf22 & ~RT3070_BB_LOOPBACK); 2800 2801 return 0; 2802 } 2803 2804 static void 2805 rt3090_rf_setup(struct rt2860_softc *sc) 2806 { 2807 uint8_t bbp; 2808 int i; 2809 2810 if (sc->mac_rev >= 0x0211) { 2811 /* enable DC filter */ 2812 rt2860_mcu_bbp_write(sc, 103, 0xc0); 2813 2814 /* improve power consumption */ 2815 bbp = rt2860_mcu_bbp_read(sc, 31); 2816 rt2860_mcu_bbp_write(sc, 31, bbp & ~0x03); 2817 } 2818 2819 RAL_WRITE(sc, RT2860_TX_SW_CFG1, 0); 2820 if (sc->mac_rev < 0x0211) { 2821 RAL_WRITE(sc, RT2860_TX_SW_CFG2, 2822 sc->patch_dac ? 0x2c : 0x0f); 2823 } else 2824 RAL_WRITE(sc, RT2860_TX_SW_CFG2, 0); 2825 2826 /* initialize RF registers from ROM */ 2827 for (i = 0; i < 10; i++) { 2828 if (sc->rf[i].reg == 0 || sc->rf[i].reg == 0xff) 2829 continue; 2830 rt3090_rf_write(sc, sc->rf[i].reg, sc->rf[i].val); 2831 } 2832 } 2833 2834 static void 2835 rt2860_set_leds(struct rt2860_softc *sc, uint16_t which) 2836 { 2837 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LEDS, 2838 which | (sc->leds & 0x7f), 0); 2839 } 2840 2841 /* 2842 * Hardware has a general-purpose programmable timer interrupt that can 2843 * periodically raise MAC_INT_4. 2844 */ 2845 static void 2846 rt2860_set_gp_timer(struct rt2860_softc *sc, int ms) 2847 { 2848 uint32_t tmp; 2849 2850 /* disable GP timer before reprogramming it */ 2851 tmp = RAL_READ(sc, RT2860_INT_TIMER_EN); 2852 RAL_WRITE(sc, RT2860_INT_TIMER_EN, tmp & ~RT2860_GP_TIMER_EN); 2853 2854 if (ms == 0) 2855 return; 2856 2857 tmp = RAL_READ(sc, RT2860_INT_TIMER_CFG); 2858 ms *= 16; /* Unit: 64us */ 2859 tmp = (tmp & 0xffff) | ms << RT2860_GP_TIMER_SHIFT; 2860 RAL_WRITE(sc, RT2860_INT_TIMER_CFG, tmp); 2861 2862 /* enable GP timer */ 2863 tmp = RAL_READ(sc, RT2860_INT_TIMER_EN); 2864 RAL_WRITE(sc, RT2860_INT_TIMER_EN, tmp | RT2860_GP_TIMER_EN); 2865 } 2866 2867 static void 2868 rt2860_set_bssid(struct rt2860_softc *sc, const uint8_t *bssid) 2869 { 2870 RAL_WRITE(sc, RT2860_MAC_BSSID_DW0, 2871 bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24); 2872 RAL_WRITE(sc, RT2860_MAC_BSSID_DW1, 2873 bssid[4] | bssid[5] << 8); 2874 } 2875 2876 static void 2877 rt2860_set_macaddr(struct rt2860_softc *sc, const uint8_t *addr) 2878 { 2879 RAL_WRITE(sc, RT2860_MAC_ADDR_DW0, 2880 addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24); 2881 RAL_WRITE(sc, RT2860_MAC_ADDR_DW1, 2882 addr[4] | addr[5] << 8 | 0xff << 16); 2883 } 2884 2885 static void 2886 rt2860_updateslot(struct ifnet *ifp) 2887 { 2888 struct rt2860_softc *sc = ifp->if_softc; 2889 struct ieee80211com *ic = ifp->if_l2com; 2890 uint32_t tmp; 2891 2892 tmp = RAL_READ(sc, RT2860_BKOFF_SLOT_CFG); 2893 tmp &= ~0xff; 2894 tmp |= (ic->ic_flags & IEEE80211_F_SHSLOT) ? 9 : 20; 2895 RAL_WRITE(sc, RT2860_BKOFF_SLOT_CFG, tmp); 2896 } 2897 2898 static void 2899 rt2860_updateprot(struct ifnet *ifp) 2900 { 2901 struct rt2860_softc *sc = ifp->if_softc; 2902 struct ieee80211com *ic = ifp->if_l2com; 2903 uint32_t tmp; 2904 2905 tmp = RT2860_RTSTH_EN | RT2860_PROT_NAV_SHORT | RT2860_TXOP_ALLOW_ALL; 2906 /* setup protection frame rate (MCS code) */ 2907 tmp |= IEEE80211_IS_CHAN_5GHZ(ic->ic_curchan) ? 2908 rt2860_rates[RT2860_RIDX_OFDM6].mcs : 2909 rt2860_rates[RT2860_RIDX_CCK11].mcs; 2910 2911 /* CCK frames don't require protection */ 2912 RAL_WRITE(sc, RT2860_CCK_PROT_CFG, tmp); 2913 2914 if (ic->ic_flags & IEEE80211_F_USEPROT) { 2915 if (ic->ic_protmode == IEEE80211_PROT_RTSCTS) 2916 tmp |= RT2860_PROT_CTRL_RTS_CTS; 2917 else if (ic->ic_protmode == IEEE80211_PROT_CTSONLY) 2918 tmp |= RT2860_PROT_CTRL_CTS; 2919 } 2920 RAL_WRITE(sc, RT2860_OFDM_PROT_CFG, tmp); 2921 } 2922 2923 static void 2924 rt2860_update_promisc(struct ifnet *ifp) 2925 { 2926 struct rt2860_softc *sc = ifp->if_softc; 2927 uint32_t tmp; 2928 2929 tmp = RAL_READ(sc, RT2860_RX_FILTR_CFG); 2930 tmp &= ~RT2860_DROP_NOT_MYBSS; 2931 if (!(ifp->if_flags & IFF_PROMISC)) 2932 tmp |= RT2860_DROP_NOT_MYBSS; 2933 RAL_WRITE(sc, RT2860_RX_FILTR_CFG, tmp); 2934 } 2935 2936 static int 2937 rt2860_updateedca(struct ieee80211com *ic) 2938 { 2939 struct rt2860_softc *sc = ic->ic_ifp->if_softc; 2940 const struct wmeParams *wmep; 2941 int aci; 2942 2943 wmep = ic->ic_wme.wme_chanParams.cap_wmeParams; 2944 2945 /* update MAC TX configuration registers */ 2946 for (aci = 0; aci < WME_NUM_AC; aci++) { 2947 RAL_WRITE(sc, RT2860_EDCA_AC_CFG(aci), 2948 wmep[aci].wmep_logcwmax << 16 | 2949 wmep[aci].wmep_logcwmin << 12 | 2950 wmep[aci].wmep_aifsn << 8 | 2951 wmep[aci].wmep_txopLimit); 2952 } 2953 2954 /* update SCH/DMA registers too */ 2955 RAL_WRITE(sc, RT2860_WMM_AIFSN_CFG, 2956 wmep[WME_AC_VO].wmep_aifsn << 12 | 2957 wmep[WME_AC_VI].wmep_aifsn << 8 | 2958 wmep[WME_AC_BK].wmep_aifsn << 4 | 2959 wmep[WME_AC_BE].wmep_aifsn); 2960 RAL_WRITE(sc, RT2860_WMM_CWMIN_CFG, 2961 wmep[WME_AC_VO].wmep_logcwmin << 12 | 2962 wmep[WME_AC_VI].wmep_logcwmin << 8 | 2963 wmep[WME_AC_BK].wmep_logcwmin << 4 | 2964 wmep[WME_AC_BE].wmep_logcwmin); 2965 RAL_WRITE(sc, RT2860_WMM_CWMAX_CFG, 2966 wmep[WME_AC_VO].wmep_logcwmax << 12 | 2967 wmep[WME_AC_VI].wmep_logcwmax << 8 | 2968 wmep[WME_AC_BK].wmep_logcwmax << 4 | 2969 wmep[WME_AC_BE].wmep_logcwmax); 2970 RAL_WRITE(sc, RT2860_WMM_TXOP0_CFG, 2971 wmep[WME_AC_BK].wmep_txopLimit << 16 | 2972 wmep[WME_AC_BE].wmep_txopLimit); 2973 RAL_WRITE(sc, RT2860_WMM_TXOP1_CFG, 2974 wmep[WME_AC_VO].wmep_txopLimit << 16 | 2975 wmep[WME_AC_VI].wmep_txopLimit); 2976 2977 return 0; 2978 } 2979 2980 #ifdef HW_CRYPTO 2981 static int 2982 rt2860_set_key(struct ieee80211com *ic, struct ieee80211_node *ni, 2983 struct ieee80211_key *k) 2984 { 2985 struct rt2860_softc *sc = ic->ic_softc; 2986 bus_size_t base; 2987 uint32_t attr; 2988 uint8_t mode, wcid, iv[8]; 2989 2990 /* defer setting of WEP keys until interface is brought up */ 2991 if ((ic->ic_if.if_flags & (IFF_UP | IFF_RUNNING)) != 2992 (IFF_UP | IFF_RUNNING)) 2993 return 0; 2994 2995 /* map net80211 cipher to RT2860 security mode */ 2996 switch (k->k_cipher) { 2997 case IEEE80211_CIPHER_WEP40: 2998 mode = RT2860_MODE_WEP40; 2999 break; 3000 case IEEE80211_CIPHER_WEP104: 3001 mode = RT2860_MODE_WEP104; 3002 break; 3003 case IEEE80211_CIPHER_TKIP: 3004 mode = RT2860_MODE_TKIP; 3005 break; 3006 case IEEE80211_CIPHER_CCMP: 3007 mode = RT2860_MODE_AES_CCMP; 3008 break; 3009 default: 3010 return EINVAL; 3011 } 3012 3013 if (k->k_flags & IEEE80211_KEY_GROUP) { 3014 wcid = 0; /* NB: update WCID0 for group keys */ 3015 base = RT2860_SKEY(0, k->k_id); 3016 } else { 3017 wcid = ((struct rt2860_node *)ni)->wcid; 3018 base = RT2860_PKEY(wcid); 3019 } 3020 3021 if (k->k_cipher == IEEE80211_CIPHER_TKIP) { 3022 RAL_WRITE_REGION_1(sc, base, k->k_key, 16); 3023 #ifndef IEEE80211_STA_ONLY 3024 if (ic->ic_opmode == IEEE80211_M_HOSTAP) { 3025 RAL_WRITE_REGION_1(sc, base + 16, &k->k_key[16], 8); 3026 RAL_WRITE_REGION_1(sc, base + 24, &k->k_key[24], 8); 3027 } else 3028 #endif 3029 { 3030 RAL_WRITE_REGION_1(sc, base + 16, &k->k_key[24], 8); 3031 RAL_WRITE_REGION_1(sc, base + 24, &k->k_key[16], 8); 3032 } 3033 } else 3034 RAL_WRITE_REGION_1(sc, base, k->k_key, k->k_len); 3035 3036 if (!(k->k_flags & IEEE80211_KEY_GROUP) || 3037 (k->k_flags & IEEE80211_KEY_TX)) { 3038 /* set initial packet number in IV+EIV */ 3039 if (k->k_cipher == IEEE80211_CIPHER_WEP40 || 3040 k->k_cipher == IEEE80211_CIPHER_WEP104) { 3041 uint32_t val = arc4random(); 3042 /* skip weak IVs from Fluhrer/Mantin/Shamir */ 3043 if (val >= 0x03ff00 && (val & 0xf8ff00) == 0x00ff00) 3044 val += 0x000100; 3045 iv[0] = val; 3046 iv[1] = val >> 8; 3047 iv[2] = val >> 16; 3048 iv[3] = k->k_id << 6; 3049 iv[4] = iv[5] = iv[6] = iv[7] = 0; 3050 } else { 3051 if (k->k_cipher == IEEE80211_CIPHER_TKIP) { 3052 iv[0] = k->k_tsc >> 8; 3053 iv[1] = (iv[0] | 0x20) & 0x7f; 3054 iv[2] = k->k_tsc; 3055 } else /* CCMP */ { 3056 iv[0] = k->k_tsc; 3057 iv[1] = k->k_tsc >> 8; 3058 iv[2] = 0; 3059 } 3060 iv[3] = k->k_id << 6 | IEEE80211_WEP_EXTIV; 3061 iv[4] = k->k_tsc >> 16; 3062 iv[5] = k->k_tsc >> 24; 3063 iv[6] = k->k_tsc >> 32; 3064 iv[7] = k->k_tsc >> 40; 3065 } 3066 RAL_WRITE_REGION_1(sc, RT2860_IVEIV(wcid), iv, 8); 3067 } 3068 3069 if (k->k_flags & IEEE80211_KEY_GROUP) { 3070 /* install group key */ 3071 attr = RAL_READ(sc, RT2860_SKEY_MODE_0_7); 3072 attr &= ~(0xf << (k->k_id * 4)); 3073 attr |= mode << (k->k_id * 4); 3074 RAL_WRITE(sc, RT2860_SKEY_MODE_0_7, attr); 3075 } else { 3076 /* install pairwise key */ 3077 attr = RAL_READ(sc, RT2860_WCID_ATTR(wcid)); 3078 attr = (attr & ~0xf) | (mode << 1) | RT2860_RX_PKEY_EN; 3079 RAL_WRITE(sc, RT2860_WCID_ATTR(wcid), attr); 3080 } 3081 return 0; 3082 } 3083 3084 static void 3085 rt2860_delete_key(struct ieee80211com *ic, struct ieee80211_node *ni, 3086 struct ieee80211_key *k) 3087 { 3088 struct rt2860_softc *sc = ic->ic_softc; 3089 uint32_t attr; 3090 uint8_t wcid; 3091 3092 if (k->k_flags & IEEE80211_KEY_GROUP) { 3093 /* remove group key */ 3094 attr = RAL_READ(sc, RT2860_SKEY_MODE_0_7); 3095 attr &= ~(0xf << (k->k_id * 4)); 3096 RAL_WRITE(sc, RT2860_SKEY_MODE_0_7, attr); 3097 3098 } else { 3099 /* remove pairwise key */ 3100 wcid = ((struct rt2860_node *)ni)->wcid; 3101 attr = RAL_READ(sc, RT2860_WCID_ATTR(wcid)); 3102 attr &= ~0xf; 3103 RAL_WRITE(sc, RT2860_WCID_ATTR(wcid), attr); 3104 } 3105 } 3106 #endif 3107 3108 static int8_t 3109 rt2860_rssi2dbm(struct rt2860_softc *sc, uint8_t rssi, uint8_t rxchain) 3110 { 3111 struct ifnet *ifp = sc->sc_ifp; 3112 struct ieee80211com *ic = ifp->if_l2com; 3113 struct ieee80211_channel *c = ic->ic_curchan; 3114 int delta; 3115 3116 if (IEEE80211_IS_CHAN_5GHZ(c)) { 3117 u_int chan = ieee80211_chan2ieee(ic, c); 3118 delta = sc->rssi_5ghz[rxchain]; 3119 3120 /* determine channel group */ 3121 if (chan <= 64) 3122 delta -= sc->lna[1]; 3123 else if (chan <= 128) 3124 delta -= sc->lna[2]; 3125 else 3126 delta -= sc->lna[3]; 3127 } else 3128 delta = sc->rssi_2ghz[rxchain] - sc->lna[0]; 3129 3130 return -12 - delta - rssi; 3131 } 3132 3133 /* 3134 * Add `delta' (signed) to each 4-bit sub-word of a 32-bit word. 3135 * Used to adjust per-rate Tx power registers. 3136 */ 3137 static __inline uint32_t 3138 b4inc(uint32_t b32, int8_t delta) 3139 { 3140 int8_t i, b4; 3141 3142 for (i = 0; i < 8; i++) { 3143 b4 = b32 & 0xf; 3144 b4 += delta; 3145 if (b4 < 0) 3146 b4 = 0; 3147 else if (b4 > 0xf) 3148 b4 = 0xf; 3149 b32 = b32 >> 4 | b4 << 28; 3150 } 3151 return b32; 3152 } 3153 3154 static const char * 3155 rt2860_get_rf(uint8_t rev) 3156 { 3157 switch (rev) { 3158 case RT2860_RF_2820: return "RT2820"; 3159 case RT2860_RF_2850: return "RT2850"; 3160 case RT2860_RF_2720: return "RT2720"; 3161 case RT2860_RF_2750: return "RT2750"; 3162 case RT3070_RF_3020: return "RT3020"; 3163 case RT3070_RF_2020: return "RT2020"; 3164 case RT3070_RF_3021: return "RT3021"; 3165 case RT3070_RF_3022: return "RT3022"; 3166 case RT3070_RF_3052: return "RT3052"; 3167 case RT3070_RF_3320: return "RT3320"; 3168 case RT3070_RF_3053: return "RT3053"; 3169 default: return "unknown"; 3170 } 3171 } 3172 3173 static int 3174 rt2860_read_eeprom(struct rt2860_softc *sc, uint8_t macaddr[IEEE80211_ADDR_LEN]) 3175 { 3176 int8_t delta_2ghz, delta_5ghz; 3177 uint32_t tmp; 3178 uint16_t val; 3179 int ridx, ant, i; 3180 3181 /* check whether the ROM is eFUSE ROM or EEPROM */ 3182 sc->sc_srom_read = rt2860_eeprom_read_2; 3183 if (sc->mac_ver >= 0x3071) { 3184 tmp = RAL_READ(sc, RT3070_EFUSE_CTRL); 3185 DPRINTF(("EFUSE_CTRL=0x%08x\n", tmp)); 3186 if (tmp & RT3070_SEL_EFUSE) 3187 sc->sc_srom_read = rt3090_efuse_read_2; 3188 } 3189 3190 /* read EEPROM version */ 3191 val = rt2860_srom_read(sc, RT2860_EEPROM_VERSION); 3192 DPRINTF(("EEPROM rev=%d, FAE=%d\n", val & 0xff, val >> 8)); 3193 3194 /* read MAC address */ 3195 val = rt2860_srom_read(sc, RT2860_EEPROM_MAC01); 3196 macaddr[0] = val & 0xff; 3197 macaddr[1] = val >> 8; 3198 val = rt2860_srom_read(sc, RT2860_EEPROM_MAC23); 3199 macaddr[2] = val & 0xff; 3200 macaddr[3] = val >> 8; 3201 val = rt2860_srom_read(sc, RT2860_EEPROM_MAC45); 3202 macaddr[4] = val & 0xff; 3203 macaddr[5] = val >> 8; 3204 3205 /* read country code */ 3206 val = rt2860_srom_read(sc, RT2860_EEPROM_COUNTRY); 3207 DPRINTF(("EEPROM region code=0x%04x\n", val)); 3208 3209 /* read vendor BBP settings */ 3210 for (i = 0; i < 8; i++) { 3211 val = rt2860_srom_read(sc, RT2860_EEPROM_BBP_BASE + i); 3212 sc->bbp[i].val = val & 0xff; 3213 sc->bbp[i].reg = val >> 8; 3214 DPRINTF(("BBP%d=0x%02x\n", sc->bbp[i].reg, sc->bbp[i].val)); 3215 } 3216 if (sc->mac_ver >= 0x3071) { 3217 /* read vendor RF settings */ 3218 for (i = 0; i < 10; i++) { 3219 val = rt2860_srom_read(sc, RT3071_EEPROM_RF_BASE + i); 3220 sc->rf[i].val = val & 0xff; 3221 sc->rf[i].reg = val >> 8; 3222 DPRINTF(("RF%d=0x%02x\n", sc->rf[i].reg, 3223 sc->rf[i].val)); 3224 } 3225 } 3226 3227 /* read RF frequency offset from EEPROM */ 3228 val = rt2860_srom_read(sc, RT2860_EEPROM_FREQ_LEDS); 3229 sc->freq = ((val & 0xff) != 0xff) ? val & 0xff : 0; 3230 DPRINTF(("EEPROM freq offset %d\n", sc->freq & 0xff)); 3231 if ((val >> 8) != 0xff) { 3232 /* read LEDs operating mode */ 3233 sc->leds = val >> 8; 3234 sc->led[0] = rt2860_srom_read(sc, RT2860_EEPROM_LED1); 3235 sc->led[1] = rt2860_srom_read(sc, RT2860_EEPROM_LED2); 3236 sc->led[2] = rt2860_srom_read(sc, RT2860_EEPROM_LED3); 3237 } else { 3238 /* broken EEPROM, use default settings */ 3239 sc->leds = 0x01; 3240 sc->led[0] = 0x5555; 3241 sc->led[1] = 0x2221; 3242 sc->led[2] = 0xa9f8; 3243 } 3244 DPRINTF(("EEPROM LED mode=0x%02x, LEDs=0x%04x/0x%04x/0x%04x\n", 3245 sc->leds, sc->led[0], sc->led[1], sc->led[2])); 3246 3247 /* read RF information */ 3248 val = rt2860_srom_read(sc, RT2860_EEPROM_ANTENNA); 3249 if (val == 0xffff) { 3250 DPRINTF(("invalid EEPROM antenna info, using default\n")); 3251 if (sc->mac_ver == 0x3593) { 3252 /* default to RF3053 3T3R */ 3253 sc->rf_rev = RT3070_RF_3053; 3254 sc->ntxchains = 3; 3255 sc->nrxchains = 3; 3256 } else if (sc->mac_ver >= 0x3071) { 3257 /* default to RF3020 1T1R */ 3258 sc->rf_rev = RT3070_RF_3020; 3259 sc->ntxchains = 1; 3260 sc->nrxchains = 1; 3261 } else { 3262 /* default to RF2820 1T2R */ 3263 sc->rf_rev = RT2860_RF_2820; 3264 sc->ntxchains = 1; 3265 sc->nrxchains = 2; 3266 } 3267 } else { 3268 sc->rf_rev = (val >> 8) & 0xf; 3269 sc->ntxchains = (val >> 4) & 0xf; 3270 sc->nrxchains = val & 0xf; 3271 } 3272 DPRINTF(("EEPROM RF rev=0x%02x chains=%dT%dR\n", 3273 sc->rf_rev, sc->ntxchains, sc->nrxchains)); 3274 3275 /* check if RF supports automatic Tx access gain control */ 3276 val = rt2860_srom_read(sc, RT2860_EEPROM_CONFIG); 3277 DPRINTF(("EEPROM CFG 0x%04x\n", val)); 3278 /* check if driver should patch the DAC issue */ 3279 if ((val >> 8) != 0xff) 3280 sc->patch_dac = (val >> 15) & 1; 3281 if ((val & 0xff) != 0xff) { 3282 sc->ext_5ghz_lna = (val >> 3) & 1; 3283 sc->ext_2ghz_lna = (val >> 2) & 1; 3284 /* check if RF supports automatic Tx access gain control */ 3285 sc->calib_2ghz = sc->calib_5ghz = 0; /* XXX (val >> 1) & 1 */; 3286 /* check if we have a hardware radio switch */ 3287 sc->rfswitch = val & 1; 3288 } 3289 if (sc->sc_flags & RT2860_ADVANCED_PS) { 3290 /* read PCIe power save level */ 3291 val = rt2860_srom_read(sc, RT2860_EEPROM_PCIE_PSLEVEL); 3292 if ((val & 0xff) != 0xff) { 3293 sc->pslevel = val & 0x3; 3294 val = rt2860_srom_read(sc, RT2860_EEPROM_REV); 3295 if ((val & 0xff80) != 0x9280) 3296 sc->pslevel = MIN(sc->pslevel, 1); 3297 DPRINTF(("EEPROM PCIe PS Level=%d\n", sc->pslevel)); 3298 } 3299 } 3300 3301 /* read power settings for 2GHz channels */ 3302 for (i = 0; i < 14; i += 2) { 3303 val = rt2860_srom_read(sc, 3304 RT2860_EEPROM_PWR2GHZ_BASE1 + i / 2); 3305 sc->txpow1[i + 0] = (int8_t)(val & 0xff); 3306 sc->txpow1[i + 1] = (int8_t)(val >> 8); 3307 3308 val = rt2860_srom_read(sc, 3309 RT2860_EEPROM_PWR2GHZ_BASE2 + i / 2); 3310 sc->txpow2[i + 0] = (int8_t)(val & 0xff); 3311 sc->txpow2[i + 1] = (int8_t)(val >> 8); 3312 } 3313 /* fix broken Tx power entries */ 3314 for (i = 0; i < 14; i++) { 3315 if (sc->txpow1[i] < 0 || sc->txpow1[i] > 31) 3316 sc->txpow1[i] = 5; 3317 if (sc->txpow2[i] < 0 || sc->txpow2[i] > 31) 3318 sc->txpow2[i] = 5; 3319 DPRINTF(("chan %d: power1=%d, power2=%d\n", 3320 rt2860_rf2850[i].chan, sc->txpow1[i], sc->txpow2[i])); 3321 } 3322 /* read power settings for 5GHz channels */ 3323 for (i = 0; i < 40; i += 2) { 3324 val = rt2860_srom_read(sc, 3325 RT2860_EEPROM_PWR5GHZ_BASE1 + i / 2); 3326 sc->txpow1[i + 14] = (int8_t)(val & 0xff); 3327 sc->txpow1[i + 15] = (int8_t)(val >> 8); 3328 3329 val = rt2860_srom_read(sc, 3330 RT2860_EEPROM_PWR5GHZ_BASE2 + i / 2); 3331 sc->txpow2[i + 14] = (int8_t)(val & 0xff); 3332 sc->txpow2[i + 15] = (int8_t)(val >> 8); 3333 } 3334 /* fix broken Tx power entries */ 3335 for (i = 0; i < 40; i++) { 3336 if (sc->txpow1[14 + i] < -7 || sc->txpow1[14 + i] > 15) 3337 sc->txpow1[14 + i] = 5; 3338 if (sc->txpow2[14 + i] < -7 || sc->txpow2[14 + i] > 15) 3339 sc->txpow2[14 + i] = 5; 3340 DPRINTF(("chan %d: power1=%d, power2=%d\n", 3341 rt2860_rf2850[14 + i].chan, sc->txpow1[14 + i], 3342 sc->txpow2[14 + i])); 3343 } 3344 3345 /* read Tx power compensation for each Tx rate */ 3346 val = rt2860_srom_read(sc, RT2860_EEPROM_DELTAPWR); 3347 delta_2ghz = delta_5ghz = 0; 3348 if ((val & 0xff) != 0xff && (val & 0x80)) { 3349 delta_2ghz = val & 0xf; 3350 if (!(val & 0x40)) /* negative number */ 3351 delta_2ghz = -delta_2ghz; 3352 } 3353 val >>= 8; 3354 if ((val & 0xff) != 0xff && (val & 0x80)) { 3355 delta_5ghz = val & 0xf; 3356 if (!(val & 0x40)) /* negative number */ 3357 delta_5ghz = -delta_5ghz; 3358 } 3359 DPRINTF(("power compensation=%d (2GHz), %d (5GHz)\n", 3360 delta_2ghz, delta_5ghz)); 3361 3362 for (ridx = 0; ridx < 5; ridx++) { 3363 uint32_t reg; 3364 3365 val = rt2860_srom_read(sc, RT2860_EEPROM_RPWR + ridx * 2); 3366 reg = val; 3367 val = rt2860_srom_read(sc, RT2860_EEPROM_RPWR + ridx * 2 + 1); 3368 reg |= (uint32_t)val << 16; 3369 3370 sc->txpow20mhz[ridx] = reg; 3371 sc->txpow40mhz_2ghz[ridx] = b4inc(reg, delta_2ghz); 3372 sc->txpow40mhz_5ghz[ridx] = b4inc(reg, delta_5ghz); 3373 3374 DPRINTF(("ridx %d: power 20MHz=0x%08x, 40MHz/2GHz=0x%08x, " 3375 "40MHz/5GHz=0x%08x\n", ridx, sc->txpow20mhz[ridx], 3376 sc->txpow40mhz_2ghz[ridx], sc->txpow40mhz_5ghz[ridx])); 3377 } 3378 3379 /* read factory-calibrated samples for temperature compensation */ 3380 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI1_2GHZ); 3381 sc->tssi_2ghz[0] = val & 0xff; /* [-4] */ 3382 sc->tssi_2ghz[1] = val >> 8; /* [-3] */ 3383 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI2_2GHZ); 3384 sc->tssi_2ghz[2] = val & 0xff; /* [-2] */ 3385 sc->tssi_2ghz[3] = val >> 8; /* [-1] */ 3386 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI3_2GHZ); 3387 sc->tssi_2ghz[4] = val & 0xff; /* [+0] */ 3388 sc->tssi_2ghz[5] = val >> 8; /* [+1] */ 3389 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI4_2GHZ); 3390 sc->tssi_2ghz[6] = val & 0xff; /* [+2] */ 3391 sc->tssi_2ghz[7] = val >> 8; /* [+3] */ 3392 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI5_2GHZ); 3393 sc->tssi_2ghz[8] = val & 0xff; /* [+4] */ 3394 sc->step_2ghz = val >> 8; 3395 DPRINTF(("TSSI 2GHz: 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x " 3396 "0x%02x 0x%02x step=%d\n", sc->tssi_2ghz[0], sc->tssi_2ghz[1], 3397 sc->tssi_2ghz[2], sc->tssi_2ghz[3], sc->tssi_2ghz[4], 3398 sc->tssi_2ghz[5], sc->tssi_2ghz[6], sc->tssi_2ghz[7], 3399 sc->tssi_2ghz[8], sc->step_2ghz)); 3400 /* check that ref value is correct, otherwise disable calibration */ 3401 if (sc->tssi_2ghz[4] == 0xff) 3402 sc->calib_2ghz = 0; 3403 3404 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI1_5GHZ); 3405 sc->tssi_5ghz[0] = val & 0xff; /* [-4] */ 3406 sc->tssi_5ghz[1] = val >> 8; /* [-3] */ 3407 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI2_5GHZ); 3408 sc->tssi_5ghz[2] = val & 0xff; /* [-2] */ 3409 sc->tssi_5ghz[3] = val >> 8; /* [-1] */ 3410 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI3_5GHZ); 3411 sc->tssi_5ghz[4] = val & 0xff; /* [+0] */ 3412 sc->tssi_5ghz[5] = val >> 8; /* [+1] */ 3413 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI4_5GHZ); 3414 sc->tssi_5ghz[6] = val & 0xff; /* [+2] */ 3415 sc->tssi_5ghz[7] = val >> 8; /* [+3] */ 3416 val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI5_5GHZ); 3417 sc->tssi_5ghz[8] = val & 0xff; /* [+4] */ 3418 sc->step_5ghz = val >> 8; 3419 DPRINTF(("TSSI 5GHz: 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x " 3420 "0x%02x 0x%02x step=%d\n", sc->tssi_5ghz[0], sc->tssi_5ghz[1], 3421 sc->tssi_5ghz[2], sc->tssi_5ghz[3], sc->tssi_5ghz[4], 3422 sc->tssi_5ghz[5], sc->tssi_5ghz[6], sc->tssi_5ghz[7], 3423 sc->tssi_5ghz[8], sc->step_5ghz)); 3424 /* check that ref value is correct, otherwise disable calibration */ 3425 if (sc->tssi_5ghz[4] == 0xff) 3426 sc->calib_5ghz = 0; 3427 3428 /* read RSSI offsets and LNA gains from EEPROM */ 3429 val = rt2860_srom_read(sc, RT2860_EEPROM_RSSI1_2GHZ); 3430 sc->rssi_2ghz[0] = val & 0xff; /* Ant A */ 3431 sc->rssi_2ghz[1] = val >> 8; /* Ant B */ 3432 val = rt2860_srom_read(sc, RT2860_EEPROM_RSSI2_2GHZ); 3433 if (sc->mac_ver >= 0x3071) { 3434 /* 3435 * On RT3090 chips (limited to 2 Rx chains), this ROM 3436 * field contains the Tx mixer gain for the 2GHz band. 3437 */ 3438 if ((val & 0xff) != 0xff) 3439 sc->txmixgain_2ghz = val & 0x7; 3440 DPRINTF(("tx mixer gain=%u (2GHz)\n", sc->txmixgain_2ghz)); 3441 } else 3442 sc->rssi_2ghz[2] = val & 0xff; /* Ant C */ 3443 sc->lna[2] = val >> 8; /* channel group 2 */ 3444 3445 val = rt2860_srom_read(sc, RT2860_EEPROM_RSSI1_5GHZ); 3446 sc->rssi_5ghz[0] = val & 0xff; /* Ant A */ 3447 sc->rssi_5ghz[1] = val >> 8; /* Ant B */ 3448 val = rt2860_srom_read(sc, RT2860_EEPROM_RSSI2_5GHZ); 3449 sc->rssi_5ghz[2] = val & 0xff; /* Ant C */ 3450 sc->lna[3] = val >> 8; /* channel group 3 */ 3451 3452 val = rt2860_srom_read(sc, RT2860_EEPROM_LNA); 3453 if (sc->mac_ver >= 0x3071) 3454 sc->lna[0] = RT3090_DEF_LNA; 3455 else /* channel group 0 */ 3456 sc->lna[0] = val & 0xff; 3457 sc->lna[1] = val >> 8; /* channel group 1 */ 3458 3459 /* fix broken 5GHz LNA entries */ 3460 if (sc->lna[2] == 0 || sc->lna[2] == 0xff) { 3461 DPRINTF(("invalid LNA for channel group %d\n", 2)); 3462 sc->lna[2] = sc->lna[1]; 3463 } 3464 if (sc->lna[3] == 0 || sc->lna[3] == 0xff) { 3465 DPRINTF(("invalid LNA for channel group %d\n", 3)); 3466 sc->lna[3] = sc->lna[1]; 3467 } 3468 3469 /* fix broken RSSI offset entries */ 3470 for (ant = 0; ant < 3; ant++) { 3471 if (sc->rssi_2ghz[ant] < -10 || sc->rssi_2ghz[ant] > 10) { 3472 DPRINTF(("invalid RSSI%d offset: %d (2GHz)\n", 3473 ant + 1, sc->rssi_2ghz[ant])); 3474 sc->rssi_2ghz[ant] = 0; 3475 } 3476 if (sc->rssi_5ghz[ant] < -10 || sc->rssi_5ghz[ant] > 10) { 3477 DPRINTF(("invalid RSSI%d offset: %d (5GHz)\n", 3478 ant + 1, sc->rssi_5ghz[ant])); 3479 sc->rssi_5ghz[ant] = 0; 3480 } 3481 } 3482 3483 return 0; 3484 } 3485 3486 int 3487 rt2860_bbp_init(struct rt2860_softc *sc) 3488 { 3489 #define N(a) (sizeof (a) / sizeof ((a)[0])) 3490 int i, ntries; 3491 3492 /* wait for BBP to wake up */ 3493 for (ntries = 0; ntries < 20; ntries++) { 3494 uint8_t bbp0 = rt2860_mcu_bbp_read(sc, 0); 3495 if (bbp0 != 0 && bbp0 != 0xff) 3496 break; 3497 } 3498 if (ntries == 20) { 3499 device_printf(sc->sc_dev, 3500 "timeout waiting for BBP to wake up\n"); 3501 return ETIMEDOUT; 3502 } 3503 3504 /* initialize BBP registers to default values */ 3505 for (i = 0; i < N(rt2860_def_bbp); i++) { 3506 rt2860_mcu_bbp_write(sc, rt2860_def_bbp[i].reg, 3507 rt2860_def_bbp[i].val); 3508 } 3509 3510 /* fix BBP84 for RT2860E */ 3511 if (sc->mac_ver == 0x2860 && sc->mac_rev != 0x0101) 3512 rt2860_mcu_bbp_write(sc, 84, 0x19); 3513 3514 if (sc->mac_ver >= 0x3071) { 3515 rt2860_mcu_bbp_write(sc, 79, 0x13); 3516 rt2860_mcu_bbp_write(sc, 80, 0x05); 3517 rt2860_mcu_bbp_write(sc, 81, 0x33); 3518 } else if (sc->mac_ver == 0x2860 && sc->mac_rev == 0x0100) { 3519 rt2860_mcu_bbp_write(sc, 69, 0x16); 3520 rt2860_mcu_bbp_write(sc, 73, 0x12); 3521 } 3522 3523 return 0; 3524 #undef N 3525 } 3526 3527 static int 3528 rt2860_txrx_enable(struct rt2860_softc *sc) 3529 { 3530 struct ifnet *ifp = sc->sc_ifp; 3531 struct ieee80211com *ic = ifp->if_l2com; 3532 uint32_t tmp; 3533 int ntries; 3534 3535 /* enable Tx/Rx DMA engine */ 3536 RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, RT2860_MAC_TX_EN); 3537 RAL_BARRIER_READ_WRITE(sc); 3538 for (ntries = 0; ntries < 200; ntries++) { 3539 tmp = RAL_READ(sc, RT2860_WPDMA_GLO_CFG); 3540 if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0) 3541 break; 3542 DELAY(1000); 3543 } 3544 if (ntries == 200) { 3545 device_printf(sc->sc_dev, "timeout waiting for DMA engine\n"); 3546 return ETIMEDOUT; 3547 } 3548 3549 DELAY(50); 3550 3551 tmp |= RT2860_RX_DMA_EN | RT2860_TX_DMA_EN | 3552 RT2860_WPDMA_BT_SIZE64 << RT2860_WPDMA_BT_SIZE_SHIFT; 3553 RAL_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp); 3554 3555 /* set Rx filter */ 3556 tmp = RT2860_DROP_CRC_ERR | RT2860_DROP_PHY_ERR; 3557 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 3558 tmp |= RT2860_DROP_UC_NOME | RT2860_DROP_DUPL | 3559 RT2860_DROP_CTS | RT2860_DROP_BA | RT2860_DROP_ACK | 3560 RT2860_DROP_VER_ERR | RT2860_DROP_CTRL_RSV | 3561 RT2860_DROP_CFACK | RT2860_DROP_CFEND; 3562 if (ic->ic_opmode == IEEE80211_M_STA) 3563 tmp |= RT2860_DROP_RTS | RT2860_DROP_PSPOLL; 3564 } 3565 RAL_WRITE(sc, RT2860_RX_FILTR_CFG, tmp); 3566 3567 RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, 3568 RT2860_MAC_RX_EN | RT2860_MAC_TX_EN); 3569 3570 return 0; 3571 } 3572 3573 static void 3574 rt2860_init(void *arg) 3575 { 3576 struct rt2860_softc *sc = arg; 3577 struct ifnet *ifp = sc->sc_ifp; 3578 struct ieee80211com *ic = ifp->if_l2com; 3579 3580 RAL_LOCK(sc); 3581 rt2860_init_locked(sc); 3582 RAL_UNLOCK(sc); 3583 3584 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 3585 ieee80211_start_all(ic); 3586 } 3587 3588 static void 3589 rt2860_init_locked(struct rt2860_softc *sc) 3590 { 3591 #define N(a) (sizeof (a) / sizeof ((a)[0])) 3592 struct ifnet *ifp = sc->sc_ifp; 3593 struct ieee80211com *ic = ifp->if_l2com; 3594 uint32_t tmp; 3595 uint8_t bbp1, bbp3; 3596 int i, qid, ridx, ntries, error; 3597 3598 RAL_LOCK_ASSERT(sc); 3599 3600 if (sc->rfswitch) { 3601 /* hardware has a radio switch on GPIO pin 2 */ 3602 if (!(RAL_READ(sc, RT2860_GPIO_CTRL) & (1 << 2))) { 3603 device_printf(sc->sc_dev, 3604 "radio is disabled by hardware switch\n"); 3605 #ifdef notyet 3606 rt2860_stop_locked(sc); 3607 return; 3608 #endif 3609 } 3610 } 3611 RAL_WRITE(sc, RT2860_PWR_PIN_CFG, RT2860_IO_RA_PE); 3612 3613 /* disable DMA */ 3614 tmp = RAL_READ(sc, RT2860_WPDMA_GLO_CFG); 3615 tmp &= 0xff0; 3616 RAL_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp); 3617 3618 /* PBF hardware reset */ 3619 RAL_WRITE(sc, RT2860_SYS_CTRL, 0xe1f); 3620 RAL_BARRIER_WRITE(sc); 3621 RAL_WRITE(sc, RT2860_SYS_CTRL, 0xe00); 3622 3623 if ((error = rt2860_load_microcode(sc)) != 0) { 3624 device_printf(sc->sc_dev, "could not load 8051 microcode\n"); 3625 rt2860_stop_locked(sc); 3626 return; 3627 } 3628 3629 rt2860_set_macaddr(sc, IF_LLADDR(ifp)); 3630 3631 /* init Tx power for all Tx rates (from EEPROM) */ 3632 for (ridx = 0; ridx < 5; ridx++) { 3633 if (sc->txpow20mhz[ridx] == 0xffffffff) 3634 continue; 3635 RAL_WRITE(sc, RT2860_TX_PWR_CFG(ridx), sc->txpow20mhz[ridx]); 3636 } 3637 3638 for (ntries = 0; ntries < 100; ntries++) { 3639 tmp = RAL_READ(sc, RT2860_WPDMA_GLO_CFG); 3640 if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0) 3641 break; 3642 DELAY(1000); 3643 } 3644 if (ntries == 100) { 3645 device_printf(sc->sc_dev, "timeout waiting for DMA engine\n"); 3646 rt2860_stop_locked(sc); 3647 return; 3648 } 3649 tmp &= 0xff0; 3650 RAL_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp); 3651 3652 /* reset Rx ring and all 6 Tx rings */ 3653 RAL_WRITE(sc, RT2860_WPDMA_RST_IDX, 0x1003f); 3654 3655 /* PBF hardware reset */ 3656 RAL_WRITE(sc, RT2860_SYS_CTRL, 0xe1f); 3657 RAL_BARRIER_WRITE(sc); 3658 RAL_WRITE(sc, RT2860_SYS_CTRL, 0xe00); 3659 3660 RAL_WRITE(sc, RT2860_PWR_PIN_CFG, RT2860_IO_RA_PE | RT2860_IO_RF_PE); 3661 3662 RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, RT2860_BBP_HRST | RT2860_MAC_SRST); 3663 RAL_BARRIER_WRITE(sc); 3664 RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, 0); 3665 3666 for (i = 0; i < N(rt2860_def_mac); i++) 3667 RAL_WRITE(sc, rt2860_def_mac[i].reg, rt2860_def_mac[i].val); 3668 if (sc->mac_ver >= 0x3071) { 3669 /* set delay of PA_PE assertion to 1us (unit of 0.25us) */ 3670 RAL_WRITE(sc, RT2860_TX_SW_CFG0, 3671 4 << RT2860_DLY_PAPE_EN_SHIFT); 3672 } 3673 3674 if (!(RAL_READ(sc, RT2860_PCI_CFG) & RT2860_PCI_CFG_PCI)) { 3675 sc->sc_flags |= RT2860_PCIE; 3676 /* PCIe has different clock cycle count than PCI */ 3677 tmp = RAL_READ(sc, RT2860_US_CYC_CNT); 3678 tmp = (tmp & ~0xff) | 0x7d; 3679 RAL_WRITE(sc, RT2860_US_CYC_CNT, tmp); 3680 } 3681 3682 /* wait while MAC is busy */ 3683 for (ntries = 0; ntries < 100; ntries++) { 3684 if (!(RAL_READ(sc, RT2860_MAC_STATUS_REG) & 3685 (RT2860_RX_STATUS_BUSY | RT2860_TX_STATUS_BUSY))) 3686 break; 3687 DELAY(1000); 3688 } 3689 if (ntries == 100) { 3690 device_printf(sc->sc_dev, "timeout waiting for MAC\n"); 3691 rt2860_stop_locked(sc); 3692 return; 3693 } 3694 3695 /* clear Host to MCU mailbox */ 3696 RAL_WRITE(sc, RT2860_H2M_BBPAGENT, 0); 3697 RAL_WRITE(sc, RT2860_H2M_MAILBOX, 0); 3698 3699 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_RFRESET, 0, 0); 3700 DELAY(1000); 3701 3702 if ((error = rt2860_bbp_init(sc)) != 0) { 3703 rt2860_stop_locked(sc); 3704 return; 3705 } 3706 3707 /* clear RX WCID search table */ 3708 RAL_SET_REGION_4(sc, RT2860_WCID_ENTRY(0), 0, 512); 3709 /* clear pairwise key table */ 3710 RAL_SET_REGION_4(sc, RT2860_PKEY(0), 0, 2048); 3711 /* clear IV/EIV table */ 3712 RAL_SET_REGION_4(sc, RT2860_IVEIV(0), 0, 512); 3713 /* clear WCID attribute table */ 3714 RAL_SET_REGION_4(sc, RT2860_WCID_ATTR(0), 0, 256); 3715 /* clear shared key table */ 3716 RAL_SET_REGION_4(sc, RT2860_SKEY(0, 0), 0, 8 * 32); 3717 /* clear shared key mode */ 3718 RAL_SET_REGION_4(sc, RT2860_SKEY_MODE_0_7, 0, 4); 3719 3720 /* init Tx rings (4 EDCAs + HCCA + Mgt) */ 3721 for (qid = 0; qid < 6; qid++) { 3722 RAL_WRITE(sc, RT2860_TX_BASE_PTR(qid), sc->txq[qid].paddr); 3723 RAL_WRITE(sc, RT2860_TX_MAX_CNT(qid), RT2860_TX_RING_COUNT); 3724 RAL_WRITE(sc, RT2860_TX_CTX_IDX(qid), 0); 3725 } 3726 3727 /* init Rx ring */ 3728 RAL_WRITE(sc, RT2860_RX_BASE_PTR, sc->rxq.paddr); 3729 RAL_WRITE(sc, RT2860_RX_MAX_CNT, RT2860_RX_RING_COUNT); 3730 RAL_WRITE(sc, RT2860_RX_CALC_IDX, RT2860_RX_RING_COUNT - 1); 3731 3732 /* setup maximum buffer sizes */ 3733 RAL_WRITE(sc, RT2860_MAX_LEN_CFG, 1 << 12 | 3734 (MCLBYTES - sizeof (struct rt2860_rxwi) - 2)); 3735 3736 for (ntries = 0; ntries < 100; ntries++) { 3737 tmp = RAL_READ(sc, RT2860_WPDMA_GLO_CFG); 3738 if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0) 3739 break; 3740 DELAY(1000); 3741 } 3742 if (ntries == 100) { 3743 device_printf(sc->sc_dev, "timeout waiting for DMA engine\n"); 3744 rt2860_stop_locked(sc); 3745 return; 3746 } 3747 tmp &= 0xff0; 3748 RAL_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp); 3749 3750 /* disable interrupts mitigation */ 3751 RAL_WRITE(sc, RT2860_DELAY_INT_CFG, 0); 3752 3753 /* write vendor-specific BBP values (from EEPROM) */ 3754 for (i = 0; i < 8; i++) { 3755 if (sc->bbp[i].reg == 0 || sc->bbp[i].reg == 0xff) 3756 continue; 3757 rt2860_mcu_bbp_write(sc, sc->bbp[i].reg, sc->bbp[i].val); 3758 } 3759 3760 /* select Main antenna for 1T1R devices */ 3761 if (sc->rf_rev == RT3070_RF_2020 || 3762 sc->rf_rev == RT3070_RF_3020 || 3763 sc->rf_rev == RT3070_RF_3320) 3764 rt3090_set_rx_antenna(sc, 0); 3765 3766 /* send LEDs operating mode to microcontroller */ 3767 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LED1, sc->led[0], 0); 3768 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LED2, sc->led[1], 0); 3769 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LED3, sc->led[2], 0); 3770 3771 if (sc->mac_ver >= 0x3071) 3772 rt3090_rf_init(sc); 3773 3774 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_SLEEP, 0x02ff, 1); 3775 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_WAKEUP, 0, 1); 3776 3777 if (sc->mac_ver >= 0x3071) 3778 rt3090_rf_wakeup(sc); 3779 3780 /* disable non-existing Rx chains */ 3781 bbp3 = rt2860_mcu_bbp_read(sc, 3); 3782 bbp3 &= ~(1 << 3 | 1 << 4); 3783 if (sc->nrxchains == 2) 3784 bbp3 |= 1 << 3; 3785 else if (sc->nrxchains == 3) 3786 bbp3 |= 1 << 4; 3787 rt2860_mcu_bbp_write(sc, 3, bbp3); 3788 3789 /* disable non-existing Tx chains */ 3790 bbp1 = rt2860_mcu_bbp_read(sc, 1); 3791 if (sc->ntxchains == 1) 3792 bbp1 = (bbp1 & ~(1 << 3 | 1 << 4)); 3793 else if (sc->mac_ver == 0x3593 && sc->ntxchains == 2) 3794 bbp1 = (bbp1 & ~(1 << 4)) | 1 << 3; 3795 else if (sc->mac_ver == 0x3593 && sc->ntxchains == 3) 3796 bbp1 = (bbp1 & ~(1 << 3)) | 1 << 4; 3797 rt2860_mcu_bbp_write(sc, 1, bbp1); 3798 3799 if (sc->mac_ver >= 0x3071) 3800 rt3090_rf_setup(sc); 3801 3802 /* select default channel */ 3803 rt2860_switch_chan(sc, ic->ic_curchan); 3804 3805 /* reset RF from MCU */ 3806 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_RFRESET, 0, 0); 3807 3808 /* set RTS threshold */ 3809 tmp = RAL_READ(sc, RT2860_TX_RTS_CFG); 3810 tmp &= ~0xffff00; 3811 tmp |= IEEE80211_RTS_DEFAULT << 8; 3812 RAL_WRITE(sc, RT2860_TX_RTS_CFG, tmp); 3813 3814 /* setup initial protection mode */ 3815 rt2860_updateprot(ifp); 3816 3817 /* turn radio LED on */ 3818 rt2860_set_leds(sc, RT2860_LED_RADIO); 3819 3820 /* enable Tx/Rx DMA engine */ 3821 if ((error = rt2860_txrx_enable(sc)) != 0) { 3822 rt2860_stop_locked(sc); 3823 return; 3824 } 3825 3826 /* clear pending interrupts */ 3827 RAL_WRITE(sc, RT2860_INT_STATUS, 0xffffffff); 3828 /* enable interrupts */ 3829 RAL_WRITE(sc, RT2860_INT_MASK, 0x3fffc); 3830 3831 if (sc->sc_flags & RT2860_ADVANCED_PS) 3832 rt2860_mcu_cmd(sc, RT2860_MCU_CMD_PSLEVEL, sc->pslevel, 0); 3833 3834 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 3835 ifp->if_drv_flags |= IFF_DRV_RUNNING; 3836 3837 callout_reset(&sc->watchdog_ch, hz, rt2860_watchdog, sc); 3838 #undef N 3839 } 3840 3841 static void 3842 rt2860_stop(void *arg) 3843 { 3844 struct rt2860_softc *sc = arg; 3845 3846 RAL_LOCK(sc); 3847 rt2860_stop_locked(sc); 3848 RAL_UNLOCK(sc); 3849 } 3850 3851 static void 3852 rt2860_stop_locked(struct rt2860_softc *sc) 3853 { 3854 struct ifnet *ifp = sc->sc_ifp; 3855 uint32_t tmp; 3856 int qid; 3857 3858 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 3859 rt2860_set_leds(sc, 0); /* turn all LEDs off */ 3860 3861 callout_stop(&sc->watchdog_ch); 3862 sc->sc_tx_timer = 0; 3863 ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); 3864 3865 /* disable interrupts */ 3866 RAL_WRITE(sc, RT2860_INT_MASK, 0); 3867 3868 /* disable GP timer */ 3869 rt2860_set_gp_timer(sc, 0); 3870 3871 /* disable Rx */ 3872 tmp = RAL_READ(sc, RT2860_MAC_SYS_CTRL); 3873 tmp &= ~(RT2860_MAC_RX_EN | RT2860_MAC_TX_EN); 3874 RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, tmp); 3875 3876 /* reset adapter */ 3877 RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, RT2860_BBP_HRST | RT2860_MAC_SRST); 3878 RAL_BARRIER_WRITE(sc); 3879 RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, 0); 3880 3881 /* reset Tx and Rx rings (and reclaim TXWIs) */ 3882 sc->qfullmsk = 0; 3883 for (qid = 0; qid < 6; qid++) 3884 rt2860_reset_tx_ring(sc, &sc->txq[qid]); 3885 rt2860_reset_rx_ring(sc, &sc->rxq); 3886 } 3887 3888 int 3889 rt2860_load_microcode(struct rt2860_softc *sc) 3890 { 3891 const struct firmware *fp; 3892 int ntries, error; 3893 3894 RAL_LOCK_ASSERT(sc); 3895 3896 RAL_UNLOCK(sc); 3897 fp = firmware_get("rt2860fw"); 3898 RAL_LOCK(sc); 3899 if (fp == NULL) { 3900 device_printf(sc->sc_dev, 3901 "unable to receive rt2860fw firmware image\n"); 3902 return EINVAL; 3903 } 3904 3905 /* set "host program ram write selection" bit */ 3906 RAL_WRITE(sc, RT2860_SYS_CTRL, RT2860_HST_PM_SEL); 3907 /* write microcode image */ 3908 RAL_WRITE_REGION_1(sc, RT2860_FW_BASE, fp->data, fp->datasize); 3909 /* kick microcontroller unit */ 3910 RAL_WRITE(sc, RT2860_SYS_CTRL, 0); 3911 RAL_BARRIER_WRITE(sc); 3912 RAL_WRITE(sc, RT2860_SYS_CTRL, RT2860_MCU_RESET); 3913 3914 RAL_WRITE(sc, RT2860_H2M_BBPAGENT, 0); 3915 RAL_WRITE(sc, RT2860_H2M_MAILBOX, 0); 3916 3917 /* wait until microcontroller is ready */ 3918 RAL_BARRIER_READ_WRITE(sc); 3919 for (ntries = 0; ntries < 1000; ntries++) { 3920 if (RAL_READ(sc, RT2860_SYS_CTRL) & RT2860_MCU_READY) 3921 break; 3922 DELAY(1000); 3923 } 3924 if (ntries == 1000) { 3925 device_printf(sc->sc_dev, 3926 "timeout waiting for MCU to initialize\n"); 3927 error = ETIMEDOUT; 3928 } else 3929 error = 0; 3930 3931 firmware_put(fp, FIRMWARE_UNLOAD); 3932 return error; 3933 } 3934 3935 /* 3936 * This function is called periodically to adjust Tx power based on 3937 * temperature variation. 3938 */ 3939 #ifdef NOT_YET 3940 static void 3941 rt2860_calib(struct rt2860_softc *sc) 3942 { 3943 struct ieee80211com *ic = &sc->sc_ic; 3944 const uint8_t *tssi; 3945 uint8_t step, bbp49; 3946 int8_t ridx, d; 3947 3948 /* read current temperature */ 3949 bbp49 = rt2860_mcu_bbp_read(sc, 49); 3950 3951 if (IEEE80211_IS_CHAN_2GHZ(ic->ic_bss->ni_chan)) { 3952 tssi = &sc->tssi_2ghz[4]; 3953 step = sc->step_2ghz; 3954 } else { 3955 tssi = &sc->tssi_5ghz[4]; 3956 step = sc->step_5ghz; 3957 } 3958 3959 if (bbp49 < tssi[0]) { /* lower than reference */ 3960 /* use higher Tx power than default */ 3961 for (d = 0; d > -4 && bbp49 <= tssi[d - 1]; d--); 3962 } else if (bbp49 > tssi[0]) { /* greater than reference */ 3963 /* use lower Tx power than default */ 3964 for (d = 0; d < +4 && bbp49 >= tssi[d + 1]; d++); 3965 } else { 3966 /* use default Tx power */ 3967 d = 0; 3968 } 3969 d *= step; 3970 3971 DPRINTF(("BBP49=0x%02x, adjusting Tx power by %d\n", bbp49, d)); 3972 3973 /* write adjusted Tx power values for each Tx rate */ 3974 for (ridx = 0; ridx < 5; ridx++) { 3975 if (sc->txpow20mhz[ridx] == 0xffffffff) 3976 continue; 3977 RAL_WRITE(sc, RT2860_TX_PWR_CFG(ridx), 3978 b4inc(sc->txpow20mhz[ridx], d)); 3979 } 3980 } 3981 #endif 3982 3983 static void 3984 rt3090_set_rx_antenna(struct rt2860_softc *sc, int aux) 3985 { 3986 uint32_t tmp; 3987 3988 if (aux) { 3989 tmp = RAL_READ(sc, RT2860_PCI_EECTRL); 3990 RAL_WRITE(sc, RT2860_PCI_EECTRL, tmp & ~RT2860_C); 3991 tmp = RAL_READ(sc, RT2860_GPIO_CTRL); 3992 RAL_WRITE(sc, RT2860_GPIO_CTRL, (tmp & ~0x0808) | 0x08); 3993 } else { 3994 tmp = RAL_READ(sc, RT2860_PCI_EECTRL); 3995 RAL_WRITE(sc, RT2860_PCI_EECTRL, tmp | RT2860_C); 3996 tmp = RAL_READ(sc, RT2860_GPIO_CTRL); 3997 RAL_WRITE(sc, RT2860_GPIO_CTRL, tmp & ~0x0808); 3998 } 3999 } 4000 4001 static void 4002 rt2860_switch_chan(struct rt2860_softc *sc, struct ieee80211_channel *c) 4003 { 4004 struct ifnet *ifp = sc->sc_ifp; 4005 struct ieee80211com *ic = ifp->if_l2com; 4006 u_int chan, group; 4007 4008 chan = ieee80211_chan2ieee(ic, c); 4009 if (chan == 0 || chan == IEEE80211_CHAN_ANY) 4010 return; 4011 4012 if (sc->mac_ver >= 0x3071) 4013 rt3090_set_chan(sc, chan); 4014 else 4015 rt2860_set_chan(sc, chan); 4016 4017 /* determine channel group */ 4018 if (chan <= 14) 4019 group = 0; 4020 else if (chan <= 64) 4021 group = 1; 4022 else if (chan <= 128) 4023 group = 2; 4024 else 4025 group = 3; 4026 4027 /* XXX necessary only when group has changed! */ 4028 rt2860_select_chan_group(sc, group); 4029 4030 DELAY(1000); 4031 } 4032 4033 static int 4034 rt2860_setup_beacon(struct rt2860_softc *sc, struct ieee80211vap *vap) 4035 { 4036 struct ieee80211com *ic = vap->iv_ic; 4037 struct ieee80211_beacon_offsets bo; 4038 struct rt2860_txwi txwi; 4039 struct mbuf *m; 4040 int ridx; 4041 4042 if ((m = ieee80211_beacon_alloc(vap->iv_bss, &bo)) == NULL) 4043 return ENOBUFS; 4044 4045 memset(&txwi, 0, sizeof txwi); 4046 txwi.wcid = 0xff; 4047 txwi.len = htole16(m->m_pkthdr.len); 4048 /* send beacons at the lowest available rate */ 4049 ridx = IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan) ? 4050 RT2860_RIDX_OFDM6 : RT2860_RIDX_CCK1; 4051 txwi.phy = htole16(rt2860_rates[ridx].mcs); 4052 if (rt2860_rates[ridx].phy == IEEE80211_T_OFDM) 4053 txwi.phy |= htole16(RT2860_PHY_OFDM); 4054 txwi.txop = RT2860_TX_TXOP_HT; 4055 txwi.flags = RT2860_TX_TS; 4056 txwi.xflags = RT2860_TX_NSEQ; 4057 4058 RAL_WRITE_REGION_1(sc, RT2860_BCN_BASE(0), 4059 (uint8_t *)&txwi, sizeof txwi); 4060 RAL_WRITE_REGION_1(sc, RT2860_BCN_BASE(0) + sizeof txwi, 4061 mtod(m, uint8_t *), m->m_pkthdr.len); 4062 4063 m_freem(m); 4064 4065 return 0; 4066 } 4067 4068 static void 4069 rt2860_enable_tsf_sync(struct rt2860_softc *sc) 4070 { 4071 struct ifnet *ifp = sc->sc_ifp; 4072 struct ieee80211com *ic = ifp->if_l2com; 4073 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 4074 uint32_t tmp; 4075 4076 tmp = RAL_READ(sc, RT2860_BCN_TIME_CFG); 4077 4078 tmp &= ~0x1fffff; 4079 tmp |= vap->iv_bss->ni_intval * 16; 4080 tmp |= RT2860_TSF_TIMER_EN | RT2860_TBTT_TIMER_EN; 4081 if (vap->iv_opmode == IEEE80211_M_STA) { 4082 /* 4083 * Local TSF is always updated with remote TSF on beacon 4084 * reception. 4085 */ 4086 tmp |= 1 << RT2860_TSF_SYNC_MODE_SHIFT; 4087 } 4088 else if (vap->iv_opmode == IEEE80211_M_IBSS || 4089 vap->iv_opmode == IEEE80211_M_MBSS) { 4090 tmp |= RT2860_BCN_TX_EN; 4091 /* 4092 * Local TSF is updated with remote TSF on beacon reception 4093 * only if the remote TSF is greater than local TSF. 4094 */ 4095 tmp |= 2 << RT2860_TSF_SYNC_MODE_SHIFT; 4096 } else if (vap->iv_opmode == IEEE80211_M_HOSTAP) { 4097 tmp |= RT2860_BCN_TX_EN; 4098 /* SYNC with nobody */ 4099 tmp |= 3 << RT2860_TSF_SYNC_MODE_SHIFT; 4100 } 4101 4102 RAL_WRITE(sc, RT2860_BCN_TIME_CFG, tmp); 4103 } 4104