xref: /freebsd/sys/dev/sfxge/common/efx_check.h (revision 148a8da8)
1 /*-
2  * Copyright (c) 2012-2016 Solarflare Communications Inc.
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions are met:
7  *
8  * 1. Redistributions of source code must retain the above copyright notice,
9  *    this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright notice,
11  *    this list of conditions and the following disclaimer in the documentation
12  *    and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
16  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
17  * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
18  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
19  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
20  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
21  * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
22  * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
23  * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
24  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25  *
26  * The views and conclusions contained in the software and documentation are
27  * those of the authors and should not be interpreted as representing official
28  * policies, either expressed or implied, of the FreeBSD Project.
29  *
30  * $FreeBSD$
31  */
32 
33 #ifndef _SYS_EFX_CHECK_H
34 #define	_SYS_EFX_CHECK_H
35 
36 #include "efsys.h"
37 
38 /*
39  * Check that the efsys.h header in client code has a valid combination of
40  * EFSYS_OPT_xxx options.
41  *
42  * NOTE: Keep checks for obsolete options here to ensure that they are removed
43  * from client code (and do not reappear in merges from other branches).
44  */
45 
46 #ifdef EFSYS_OPT_FALCON
47 # error "FALCON is obsolete and is not supported."
48 #endif
49 
50 /* Support NVRAM based boot config */
51 #if EFSYS_OPT_BOOTCFG
52 # if !EFSYS_OPT_NVRAM
53 #  error "BOOTCFG requires NVRAM"
54 # endif
55 #endif /* EFSYS_OPT_BOOTCFG */
56 
57 /* Verify chip implements accessed registers */
58 #if EFSYS_OPT_CHECK_REG
59 # if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
60 	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
61 #  error "CHECK_REG requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
62 # endif
63 #endif /* EFSYS_OPT_CHECK_REG */
64 
65 /* Decode fatal errors */
66 #if EFSYS_OPT_DECODE_INTR_FATAL
67 # if !EFSYS_OPT_SIENA
68 #  error "INTR_FATAL requires SIENA"
69 # endif
70 #endif /* EFSYS_OPT_DECODE_INTR_FATAL */
71 
72 /* Support diagnostic hardware tests */
73 #if EFSYS_OPT_DIAG
74 # if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
75 	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
76 #  error "DIAG requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
77 # endif
78 #endif /* EFSYS_OPT_DIAG */
79 
80 /* Support optimized EVQ data access */
81 #if EFSYS_OPT_EV_PREFETCH
82 # if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
83 	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
84 #  error "EV_PREFETCH requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
85 # endif
86 #endif /* EFSYS_OPT_EV_PREFETCH */
87 
88 #ifdef EFSYS_OPT_FALCON_NIC_CFG_OVERRIDE
89 # error "FALCON_NIC_CFG_OVERRIDE is obsolete and is not supported."
90 #endif
91 
92 /* Support hardware packet filters */
93 #if EFSYS_OPT_FILTER
94 # if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
95 	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
96 #  error "FILTER requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
97 # endif
98 #endif /* EFSYS_OPT_FILTER */
99 
100 #if (EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
101 # if !EFSYS_OPT_FILTER
102 #  error "HUNTINGTON or MEDFORD or MEDFORD2 requires FILTER"
103 # endif
104 #endif /* EFSYS_OPT_HUNTINGTON */
105 
106 /* Support hardware loopback modes */
107 #if EFSYS_OPT_LOOPBACK
108 # if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
109 	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
110 #  error "LOOPBACK requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
111 # endif
112 #endif /* EFSYS_OPT_LOOPBACK */
113 
114 #ifdef EFSYS_OPT_MAC_FALCON_GMAC
115 # error "MAC_FALCON_GMAC is obsolete and is not supported."
116 #endif
117 
118 #ifdef EFSYS_OPT_MAC_FALCON_XMAC
119 # error "MAC_FALCON_XMAC is obsolete and is not supported."
120 #endif
121 
122 /* Support MAC statistics */
123 #if EFSYS_OPT_MAC_STATS
124 # if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
125 	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
126 #  error "MAC_STATS requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
127 # endif
128 #endif /* EFSYS_OPT_MAC_STATS */
129 
130 /* Support management controller messages */
131 #if EFSYS_OPT_MCDI
132 # if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
133 	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
134 #  error "MCDI requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
135 # endif
136 #endif /* EFSYS_OPT_MCDI */
137 
138 #if (EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
139 	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
140 # if !EFSYS_OPT_MCDI
141 #  error "SIENA or HUNTINGTON or MEDFORD or MEDFORD2 requires MCDI"
142 # endif
143 #endif
144 
145 /* Support MCDI logging */
146 #if EFSYS_OPT_MCDI_LOGGING
147 # if !EFSYS_OPT_MCDI
148 #  error "MCDI_LOGGING requires MCDI"
149 # endif
150 #endif /* EFSYS_OPT_MCDI_LOGGING */
151 
152 /* Support MCDI proxy authorization */
153 #if EFSYS_OPT_MCDI_PROXY_AUTH
154 # if !EFSYS_OPT_MCDI
155 #  error "MCDI_PROXY_AUTH requires MCDI"
156 # endif
157 #endif /* EFSYS_OPT_MCDI_PROXY_AUTH */
158 
159 #ifdef EFSYS_OPT_MON_LM87
160 # error "MON_LM87 is obsolete and is not supported."
161 #endif
162 
163 #ifdef EFSYS_OPT_MON_MAX6647
164 # error "MON_MAX6647 is obsolete and is not supported."
165 #endif
166 
167 #ifdef EFSYS_OPT_MON_NULL
168 # error "MON_NULL is obsolete and is not supported."
169 #endif
170 
171 #ifdef EFSYS_OPT_MON_SIENA
172 #  error "MON_SIENA is obsolete (replaced by MON_MCDI)."
173 #endif
174 
175 #ifdef EFSYS_OPT_MON_HUNTINGTON
176 #  error "MON_HUNTINGTON is obsolete (replaced by MON_MCDI)."
177 #endif
178 
179 /* Support monitor statistics (voltage/temperature) */
180 #if EFSYS_OPT_MON_STATS
181 # if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
182 	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
183 #  error "MON_STATS requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
184 # endif
185 #endif /* EFSYS_OPT_MON_STATS */
186 
187 /* Support Monitor via mcdi */
188 #if EFSYS_OPT_MON_MCDI
189 # if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
190 	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
191 #  error "MON_MCDI requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
192 # endif
193 #endif /* EFSYS_OPT_MON_MCDI*/
194 
195 /* Support printable names for statistics */
196 #if EFSYS_OPT_NAMES
197 # if !(EFSYS_OPT_LOOPBACK || EFSYS_OPT_MAC_STATS || EFSYS_OPT_MCDI || \
198 	EFSYS_MON_STATS || EFSYS_OPT_PHY_STATS || EFSYS_OPT_QSTATS)
199 #  error "NAMES requires LOOPBACK or xxxSTATS or MCDI"
200 # endif
201 #endif /* EFSYS_OPT_NAMES */
202 
203 /* Support non volatile configuration */
204 #if EFSYS_OPT_NVRAM
205 # if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
206 	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
207 #  error "NVRAM requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
208 # endif
209 #endif /* EFSYS_OPT_NVRAM */
210 
211 #if EFSYS_OPT_IMAGE_LAYOUT
212 /* Support signed image layout handling */
213 # if !(EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
214 #  error "IMAGE_LAYOUT requires MEDFORD or MEDFORD2"
215 # endif
216 #endif /* EFSYS_OPT_IMAGE_LAYOUT */
217 
218 #ifdef EFSYS_OPT_NVRAM_FALCON_BOOTROM
219 # error "NVRAM_FALCON_BOOTROM is obsolete and is not supported."
220 #endif
221 
222 #ifdef EFSYS_OPT_NVRAM_SFT9001
223 # error "NVRAM_SFT9001 is obsolete and is not supported."
224 #endif
225 
226 #ifdef EFSYS_OPT_NVRAM_SFX7101
227 # error "NVRAM_SFX7101 is obsolete and is not supported."
228 #endif
229 
230 #ifdef EFSYS_OPT_PCIE_TUNE
231 # error "PCIE_TUNE is obsolete and is not supported."
232 #endif
233 
234 #ifdef EFSYS_OPT_PHY_BIST
235 # error "PHY_BIST is obsolete (replaced by BIST)."
236 #endif
237 
238 /* Support PHY flags */
239 #if EFSYS_OPT_PHY_FLAGS
240 # if !EFSYS_OPT_SIENA
241 #  error "PHY_FLAGS requires SIENA"
242 # endif
243 #endif /* EFSYS_OPT_PHY_FLAGS */
244 
245 /* Support for PHY LED control */
246 #if EFSYS_OPT_PHY_LED_CONTROL
247 # if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
248 	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
249 #  error "PHY_LED_CONTROL requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
250 # endif
251 #endif /* EFSYS_OPT_PHY_LED_CONTROL */
252 
253 #ifdef EFSYS_OPT_PHY_NULL
254 # error "PHY_NULL is obsolete and is not supported."
255 #endif
256 
257 #ifdef EFSYS_OPT_PHY_PM8358
258 # error "PHY_PM8358 is obsolete and is not supported."
259 #endif
260 
261 #ifdef EFSYS_OPT_PHY_PROPS
262 # error "PHY_PROPS is obsolete and is not supported."
263 #endif
264 
265 #ifdef EFSYS_OPT_PHY_QT2022C2
266 # error "PHY_QT2022C2 is obsolete and is not supported."
267 #endif
268 
269 #ifdef EFSYS_OPT_PHY_QT2025C
270 # error "PHY_QT2025C is obsolete and is not supported."
271 #endif
272 
273 #ifdef EFSYS_OPT_PHY_SFT9001
274 # error "PHY_SFT9001 is obsolete and is not supported."
275 #endif
276 
277 #ifdef EFSYS_OPT_PHY_SFX7101
278 # error "PHY_SFX7101 is obsolete and is not supported."
279 #endif
280 
281 /* Support PHY statistics */
282 #if EFSYS_OPT_PHY_STATS
283 # if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
284 #  error "PHY_STATS requires SIENA or HUNTINGTON or MEDFORD"
285 # endif
286 #endif /* EFSYS_OPT_PHY_STATS */
287 
288 #ifdef EFSYS_OPT_PHY_TXC43128
289 # error "PHY_TXC43128 is obsolete and is not supported."
290 #endif
291 
292 /* Support EVQ/RXQ/TXQ statistics */
293 #if EFSYS_OPT_QSTATS
294 # if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
295 	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
296 #  error "QSTATS requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
297 # endif
298 #endif /* EFSYS_OPT_QSTATS */
299 
300 #ifdef EFSYS_OPT_RX_HDR_SPLIT
301 # error "RX_HDR_SPLIT is obsolete and is not supported"
302 #endif
303 
304 /* Support receive scaling (RSS) */
305 #if EFSYS_OPT_RX_SCALE
306 # if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
307 	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
308 #  error "RX_SCALE requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
309 # endif
310 #endif /* EFSYS_OPT_RX_SCALE */
311 
312 /* Support receive scatter DMA */
313 #if EFSYS_OPT_RX_SCATTER
314 # if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
315 	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
316 #  error "RX_SCATTER requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
317 # endif
318 #endif /* EFSYS_OPT_RX_SCATTER */
319 
320 #ifdef EFSYS_OPT_STAT_NAME
321 # error "STAT_NAME is obsolete (replaced by NAMES)."
322 #endif
323 
324 /* Support PCI Vital Product Data (VPD) */
325 #if EFSYS_OPT_VPD
326 # if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
327 	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
328 #  error "VPD requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
329 # endif
330 #endif /* EFSYS_OPT_VPD */
331 
332 /* Support Wake on LAN */
333 #ifdef EFSYS_OPT_WOL
334 # error "WOL is obsolete and is not supported"
335 #endif /* EFSYS_OPT_WOL */
336 
337 #ifdef EFSYS_OPT_MCAST_FILTER_LIST
338 #  error "MCAST_FILTER_LIST is obsolete and is not supported"
339 #endif
340 
341 /* Support BIST */
342 #if EFSYS_OPT_BIST
343 # if !(EFSYS_OPT_SIENA || EFSYS_OPT_HUNTINGTON || \
344 	EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
345 #  error "BIST requires SIENA or HUNTINGTON or MEDFORD or MEDFORD2"
346 # endif
347 #endif /* EFSYS_OPT_BIST */
348 
349 /* Support MCDI licensing API */
350 #if EFSYS_OPT_LICENSING
351 # if !EFSYS_OPT_MCDI
352 #  error "LICENSING requires MCDI"
353 # endif
354 # if !EFSYS_HAS_UINT64
355 #  error "LICENSING requires UINT64"
356 # endif
357 #endif /* EFSYS_OPT_LICENSING */
358 
359 /* Support adapters with missing static config (for factory use only) */
360 #if EFSYS_OPT_ALLOW_UNCONFIGURED_NIC
361 # if !(EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
362 #  error "ALLOW_UNCONFIGURED_NIC requires MEDFORD or MEDFORD2"
363 # endif
364 #endif /* EFSYS_OPT_ALLOW_UNCONFIGURED_NIC */
365 
366 /* Support packed stream mode */
367 #if EFSYS_OPT_RX_PACKED_STREAM
368 # if !(EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
369 #  error "PACKED_STREAM requires HUNTINGTON or MEDFORD or MEDFORD2"
370 # endif
371 #endif
372 
373 #if EFSYS_OPT_RX_ES_SUPER_BUFFER
374 /* Support equal stride super-buffer mode */
375 # if !(EFSYS_OPT_MEDFORD2)
376 #  error "ES_SUPER_BUFFER requires MEDFORD2"
377 # endif
378 #endif
379 
380 /* Support hardware assistance for tunnels */
381 #if EFSYS_OPT_TUNNEL
382 # if !(EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
383 #  error "TUNNEL requires MEDFORD or MEDFORD2"
384 # endif
385 #endif /* EFSYS_OPT_TUNNEL */
386 
387 #if EFSYS_OPT_FW_SUBVARIANT_AWARE
388 /* Advertise that the driver is firmware subvariant aware */
389 # if !(EFSYS_OPT_MEDFORD2)
390 #  error "FW_SUBVARIANT_AWARE requires MEDFORD2"
391 # endif
392 #endif
393 
394 #endif /* _SYS_EFX_CHECK_H */
395