xref: /freebsd/sys/dev/tsec/if_tsec_fdt.c (revision f05cddf9)
1 /*-
2  * Copyright (C) 2007-2008 Semihalf, Rafal Jaworowski
3  * Copyright (C) 2006-2007 Semihalf, Piotr Kruszynski
4  * All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
18  * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
19  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
20  * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
21  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
22  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
23  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
24  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25  *
26  * From: FreeBSD: head/sys/dev/tsec/if_tsec_ocp.c 188712 2009-02-17 14:59:47Z raj
27  */
28 
29 /*
30  * FDT 'simple-bus' attachment for Freescale TSEC controller.
31  */
32 #include <sys/cdefs.h>
33 __FBSDID("$FreeBSD$");
34 
35 #include <sys/param.h>
36 #include <sys/systm.h>
37 #include <sys/endian.h>
38 #include <sys/mbuf.h>
39 #include <sys/kernel.h>
40 #include <sys/module.h>
41 #include <sys/socket.h>
42 #include <sys/sysctl.h>
43 
44 #include <sys/bus.h>
45 #include <machine/bus.h>
46 #include <sys/rman.h>
47 #include <machine/resource.h>
48 
49 #include <net/ethernet.h>
50 #include <net/if.h>
51 #include <net/if_dl.h>
52 #include <net/if_media.h>
53 #include <net/if_arp.h>
54 
55 #include <dev/fdt/fdt_common.h>
56 #include <dev/mii/mii.h>
57 #include <dev/mii/miivar.h>
58 #include <dev/ofw/ofw_bus.h>
59 #include <dev/ofw/ofw_bus_subr.h>
60 #include <dev/ofw/openfirm.h>
61 
62 #include <dev/tsec/if_tsec.h>
63 #include <dev/tsec/if_tsecreg.h>
64 
65 #include "miibus_if.h"
66 
67 #define	TSEC_RID_TXIRQ	0
68 #define	TSEC_RID_RXIRQ	1
69 #define	TSEC_RID_ERRIRQ	2
70 
71 static int tsec_fdt_probe(device_t dev);
72 static int tsec_fdt_attach(device_t dev);
73 static int tsec_fdt_detach(device_t dev);
74 static int tsec_setup_intr(struct tsec_softc *sc, struct resource **ires,
75     void **ihand, int *irid, driver_intr_t handler, const char *iname);
76 static void tsec_release_intr(struct tsec_softc *sc, struct resource *ires,
77     void *ihand, int irid, const char *iname);
78 
79 static device_method_t tsec_methods[] = {
80 	/* Device interface */
81 	DEVMETHOD(device_probe,		tsec_fdt_probe),
82 	DEVMETHOD(device_attach,	tsec_fdt_attach),
83 	DEVMETHOD(device_detach,	tsec_fdt_detach),
84 
85 	DEVMETHOD(device_shutdown,	tsec_shutdown),
86 	DEVMETHOD(device_suspend,	tsec_suspend),
87 	DEVMETHOD(device_resume,	tsec_resume),
88 
89 	/* MII interface */
90 	DEVMETHOD(miibus_readreg,	tsec_miibus_readreg),
91 	DEVMETHOD(miibus_writereg,	tsec_miibus_writereg),
92 	DEVMETHOD(miibus_statchg,	tsec_miibus_statchg),
93 
94 	DEVMETHOD_END
95 };
96 
97 static driver_t tsec_fdt_driver = {
98 	"tsec",
99 	tsec_methods,
100 	sizeof(struct tsec_softc),
101 };
102 
103 DRIVER_MODULE(tsec, simplebus, tsec_fdt_driver, tsec_devclass, 0, 0);
104 MODULE_DEPEND(tsec, simplebus, 1, 1, 1);
105 MODULE_DEPEND(tsec, ether, 1, 1, 1);
106 
107 static int
108 tsec_fdt_probe(device_t dev)
109 {
110 	struct tsec_softc *sc;
111 	uint32_t id;
112 
113 	if (!ofw_bus_is_compatible(dev, "gianfar"))
114 		return (ENXIO);
115 
116 	sc = device_get_softc(dev);
117 
118 	sc->sc_rrid = 0;
119 	sc->sc_rres = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->sc_rrid,
120 	    RF_ACTIVE);
121 	if (sc->sc_rres == NULL)
122 		return (ENXIO);
123 
124 	sc->sc_bas.bsh = rman_get_bushandle(sc->sc_rres);
125 	sc->sc_bas.bst = rman_get_bustag(sc->sc_rres);
126 
127 	/* Check if we are eTSEC (enhanced TSEC) */
128 	id = TSEC_READ(sc, TSEC_REG_ID);
129 	sc->is_etsec = ((id >> 16) == TSEC_ETSEC_ID) ? 1 : 0;
130 	id |= TSEC_READ(sc, TSEC_REG_ID2);
131 
132 	bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_rrid, sc->sc_rres);
133 
134 	if (id == 0) {
135 		device_printf(dev, "could not identify TSEC type\n");
136 		return (ENXIO);
137 	}
138 
139 	if (sc->is_etsec)
140 		device_set_desc(dev, "Enhanced Three-Speed Ethernet Controller");
141 	else
142 		device_set_desc(dev, "Three-Speed Ethernet Controller");
143 
144 	return (BUS_PROBE_DEFAULT);
145 }
146 
147 static int
148 tsec_fdt_attach(device_t dev)
149 {
150 	struct tsec_softc *sc;
151 	int error = 0;
152 
153 	sc = device_get_softc(dev);
154 	sc->dev = dev;
155 	sc->node = ofw_bus_get_node(dev);
156 
157 	/* Get phy address from fdt */
158 	if (fdt_get_phyaddr(sc->node, sc->dev, &sc->phyaddr,
159 	    (void **)&sc->phy_sc) != 0)
160 		return (ENXIO);
161 
162 	/* Init timer */
163 	callout_init(&sc->tsec_callout, 1);
164 
165 	/* Init locks */
166 	mtx_init(&sc->transmit_lock, device_get_nameunit(dev), "TSEC TX lock",
167 	    MTX_DEF);
168 	mtx_init(&sc->receive_lock, device_get_nameunit(dev), "TSEC RX lock",
169 	    MTX_DEF);
170 	mtx_init(&sc->ic_lock, device_get_nameunit(dev), "TSEC IC lock",
171 	    MTX_DEF);
172 
173 	/* Allocate IO memory for TSEC registers */
174 	sc->sc_rrid = 0;
175 	sc->sc_rres = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->sc_rrid,
176 	    RF_ACTIVE);
177 	if (sc->sc_rres == NULL) {
178 		device_printf(dev, "could not allocate IO memory range!\n");
179 		goto fail1;
180 	}
181 	sc->sc_bas.bsh = rman_get_bushandle(sc->sc_rres);
182 	sc->sc_bas.bst = rman_get_bustag(sc->sc_rres);
183 
184 	/* TSEC attach */
185 	if (tsec_attach(sc) != 0) {
186 		device_printf(dev, "could not be configured\n");
187 		goto fail2;
188 	}
189 
190 	/* Set up interrupts (TX/RX/ERR) */
191 	sc->sc_transmit_irid = TSEC_RID_TXIRQ;
192 	error = tsec_setup_intr(sc, &sc->sc_transmit_ires,
193 	    &sc->sc_transmit_ihand, &sc->sc_transmit_irid,
194 	    tsec_transmit_intr, "TX");
195 	if (error)
196 		goto fail2;
197 
198 	sc->sc_receive_irid = TSEC_RID_RXIRQ;
199 	error = tsec_setup_intr(sc, &sc->sc_receive_ires,
200 	    &sc->sc_receive_ihand, &sc->sc_receive_irid,
201 	    tsec_receive_intr, "RX");
202 	if (error)
203 		goto fail3;
204 
205 	sc->sc_error_irid = TSEC_RID_ERRIRQ;
206 	error = tsec_setup_intr(sc, &sc->sc_error_ires,
207 	    &sc->sc_error_ihand, &sc->sc_error_irid,
208 	    tsec_error_intr, "ERR");
209 	if (error)
210 		goto fail4;
211 
212 	return (0);
213 
214 fail4:
215 	tsec_release_intr(sc, sc->sc_receive_ires, sc->sc_receive_ihand,
216 	    sc->sc_receive_irid, "RX");
217 fail3:
218 	tsec_release_intr(sc, sc->sc_transmit_ires, sc->sc_transmit_ihand,
219 	    sc->sc_transmit_irid, "TX");
220 fail2:
221 	bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_rrid, sc->sc_rres);
222 fail1:
223 	mtx_destroy(&sc->receive_lock);
224 	mtx_destroy(&sc->transmit_lock);
225 	return (ENXIO);
226 }
227 
228 static int
229 tsec_setup_intr(struct tsec_softc *sc, struct resource **ires, void **ihand,
230     int *irid, driver_intr_t handler, const char *iname)
231 {
232 	int error;
233 
234 	*ires = bus_alloc_resource_any(sc->dev, SYS_RES_IRQ, irid, RF_ACTIVE);
235 	if (*ires == NULL) {
236 		device_printf(sc->dev, "could not allocate %s IRQ\n", iname);
237 		return (ENXIO);
238 	}
239 	error = bus_setup_intr(sc->dev, *ires, INTR_TYPE_NET | INTR_MPSAFE,
240 	    NULL, handler, sc, ihand);
241 	if (error) {
242 		device_printf(sc->dev, "failed to set up %s IRQ\n", iname);
243 		if (bus_release_resource(sc->dev, SYS_RES_IRQ, *irid, *ires))
244 			device_printf(sc->dev, "could not release %s IRQ\n", iname);
245 		*ires = NULL;
246 		return (error);
247 	}
248 	return (0);
249 }
250 
251 static void
252 tsec_release_intr(struct tsec_softc *sc, struct resource *ires, void *ihand,
253     int irid, const char *iname)
254 {
255 	int error;
256 
257 	if (ires == NULL)
258 		return;
259 
260 	error = bus_teardown_intr(sc->dev, ires, ihand);
261 	if (error)
262 		device_printf(sc->dev, "bus_teardown_intr() failed for %s intr"
263 		    ", error %d\n", iname, error);
264 
265 	error = bus_release_resource(sc->dev, SYS_RES_IRQ, irid, ires);
266 	if (error)
267 		device_printf(sc->dev, "bus_release_resource() failed for %s "
268 		    "intr, error %d\n", iname, error);
269 }
270 
271 static int
272 tsec_fdt_detach(device_t dev)
273 {
274 	struct tsec_softc *sc;
275 	int error;
276 
277 	sc = device_get_softc(dev);
278 
279 	/* Wait for stopping watchdog */
280 	callout_drain(&sc->tsec_callout);
281 
282 	/* Stop and release all interrupts */
283 	tsec_release_intr(sc, sc->sc_transmit_ires, sc->sc_transmit_ihand,
284 	    sc->sc_transmit_irid, "TX");
285 	tsec_release_intr(sc, sc->sc_receive_ires, sc->sc_receive_ihand,
286 	    sc->sc_receive_irid, "RX");
287 	tsec_release_intr(sc, sc->sc_error_ires, sc->sc_error_ihand,
288 	    sc->sc_error_irid, "ERR");
289 
290 	/* TSEC detach */
291 	tsec_detach(sc);
292 
293 	/* Free IO memory handler */
294 	if (sc->sc_rres) {
295 		error = bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_rrid,
296 		    sc->sc_rres);
297 		if (error)
298 			device_printf(dev, "bus_release_resource() failed for"
299 			    " IO memory, error %d\n", error);
300 	}
301 
302 	/* Destroy locks */
303 	mtx_destroy(&sc->receive_lock);
304 	mtx_destroy(&sc->transmit_lock);
305 	mtx_destroy(&sc->ic_lock);
306 	return (0);
307 }
308 
309 void
310 tsec_get_hwaddr(struct tsec_softc *sc, uint8_t *addr)
311 {
312 	union {
313 		uint32_t reg[2];
314 		uint8_t addr[6];
315 	} hw;
316 	int i;
317 
318 	hw.reg[0] = hw.reg[1] = 0;
319 
320 	/* Retrieve the hardware address from the device tree. */
321 	i = OF_getprop(sc->node, "local-mac-address", (void *)hw.addr, 6);
322 	if (i == 6 && (hw.reg[0] != 0 || hw.reg[1] != 0)) {
323 		bcopy(hw.addr, addr, 6);
324 		return;
325 	}
326 
327 	/*
328 	 * Fall back -- use the currently programmed address in the hope that
329 	 * it was set be firmware...
330 	 */
331 	hw.reg[0] = TSEC_READ(sc, TSEC_REG_MACSTNADDR1);
332 	hw.reg[1] = TSEC_READ(sc, TSEC_REG_MACSTNADDR2);
333 	for (i = 0; i < 6; i++)
334 		addr[5-i] = hw.addr[i];
335 }
336