xref: /freebsd/sys/dev/usb/controller/atmegadci.h (revision 0957b409)
1 /* $FreeBSD$ */
2 /*-
3  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
4  *
5  * Copyright (c) 2009 Hans Petter Selasky. All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  */
28 
29 /*
30  * USB Device Port register definitions, copied from ATMEGA documentation
31  * provided by ATMEL.
32  */
33 
34 #ifndef _ATMEGADCI_H_
35 #define	_ATMEGADCI_H_
36 
37 #define	ATMEGA_MAX_DEVICES (USB_MIN_DEVICES + 1)
38 
39 #define	ATMEGA_OTGTCON 0xF9
40 #define	ATMEGA_OTGTCON_VALUE(x) ((x) << 0)
41 #define	ATMEGA_OTGTCON_PAGE(x) ((x) << 5)
42 
43 #define	ATMEGA_UEINT 0xF4
44 #define	ATMEGA_UEINT_MASK(n) (1 << (n))	/* endpoint interrupt mask */
45 
46 #define	ATMEGA_UEBCHX 0xF3		/* FIFO byte count high */
47 #define	ATMEGA_UEBCLX 0xF2		/* FIFO byte count low */
48 #define	ATMEGA_UEDATX 0xF1		/* FIFO data */
49 
50 #define	ATMEGA_UEIENX 0xF0		/* interrupt enable register */
51 #define	ATMEGA_UEIENX_TXINE (1 << 0)
52 #define	ATMEGA_UEIENX_STALLEDE (1 << 1)
53 #define	ATMEGA_UEIENX_RXOUTE (1 << 2)
54 #define	ATMEGA_UEIENX_RXSTPE (1 << 3)	/* received SETUP packet */
55 #define	ATMEGA_UEIENX_NAKOUTE (1 << 4)
56 #define	ATMEGA_UEIENX_NAKINE (1 << 6)
57 #define	ATMEGA_UEIENX_FLERRE (1 << 7)
58 
59 #define	ATMEGA_UESTA1X 0xEF
60 #define	ATMEGA_UESTA1X_CURRBK (3 << 0)	/* current bank */
61 #define	ATMEGA_UESTA1X_CTRLDIR (1 << 2)	/* control endpoint direction */
62 
63 #define	ATMEGA_UESTA0X 0xEE
64 #define	ATMEGA_UESTA0X_NBUSYBK (3 << 0)
65 #define	ATMEGA_UESTA0X_DTSEQ (3 << 2)
66 #define	ATMEGA_UESTA0X_UNDERFI (1 << 5)	/* underflow */
67 #define	ATMEGA_UESTA0X_OVERFI (1 << 6)	/* overflow */
68 #define	ATMEGA_UESTA0X_CFGOK (1 << 7)
69 
70 #define	ATMEGA_UECFG1X 0xED		/* endpoint config register */
71 #define	ATMEGA_UECFG1X_ALLOC (1 << 1)
72 #define	ATMEGA_UECFG1X_EPBK0 (0 << 2)
73 #define	ATMEGA_UECFG1X_EPBK1 (1 << 2)
74 #define	ATMEGA_UECFG1X_EPBK2 (2 << 2)
75 #define	ATMEGA_UECFG1X_EPBK3 (3 << 2)
76 #define	ATMEGA_UECFG1X_EPSIZE(n) ((n) << 4)
77 
78 #define	ATMEGA_UECFG0X 0xEC
79 #define	ATMEGA_UECFG0X_EPDIR (1 << 0)	/* endpoint direction */
80 #define	ATMEGA_UECFG0X_EPTYPE0 (0 << 6)
81 #define	ATMEGA_UECFG0X_EPTYPE1 (1 << 6)
82 #define	ATMEGA_UECFG0X_EPTYPE2 (2 << 6)
83 #define	ATMEGA_UECFG0X_EPTYPE3 (3 << 6)
84 
85 #define	ATMEGA_UECONX 0xEB
86 #define	ATMEGA_UECONX_EPEN (1 << 0)
87 #define	ATMEGA_UECONX_RSTDT (1 << 3)
88 #define	ATMEGA_UECONX_STALLRQC (1 << 4)	/* stall request clear */
89 #define	ATMEGA_UECONX_STALLRQ (1 << 5)	/* stall request set */
90 
91 #define	ATMEGA_UERST 0xEA		/* endpoint reset register */
92 #define	ATMEGA_UERST_MASK(n) (1 << (n))
93 
94 #define	ATMEGA_UENUM 0xE9		/* endpoint number */
95 
96 #define	ATMEGA_UEINTX 0xE8		/* interrupt register */
97 #define	ATMEGA_UEINTX_TXINI (1 << 0)
98 #define	ATMEGA_UEINTX_STALLEDI (1 << 1)
99 #define	ATMEGA_UEINTX_RXOUTI (1 << 2)
100 #define	ATMEGA_UEINTX_RXSTPI (1 << 3)	/* received setup packet */
101 #define	ATMEGA_UEINTX_NAKOUTI (1 << 4)
102 #define	ATMEGA_UEINTX_RWAL (1 << 5)
103 #define	ATMEGA_UEINTX_NAKINI (1 << 6)
104 #define	ATMEGA_UEINTX_FIFOCON (1 << 7)
105 
106 #define	ATMEGA_UDMFN 0xE6
107 #define	ATMEGA_UDMFN_FNCERR (1 << 4)
108 
109 #define	ATMEGA_UDFNUMH 0xE5		/* frame number high */
110 #define	ATMEGA_UDFNUMH_MASK 7
111 
112 #define	ATMEGA_UDFNUML 0xE4		/* frame number low */
113 #define	ATMEGA_UDFNUML_MASK 0xFF
114 
115 #define	ATMEGA_FRAME_MASK 0x7FF
116 
117 #define	ATMEGA_UDADDR 0xE3		/* USB address */
118 #define	ATMEGA_UDADDR_MASK 0x7F
119 #define	ATMEGA_UDADDR_ADDEN (1 << 7)
120 
121 #define	ATMEGA_UDIEN 0xE2		/* USB device interrupt enable */
122 #define	ATMEGA_UDINT_SUSPE (1 << 0)
123 #define	ATMEGA_UDINT_MSOFE (1 << 1)
124 #define	ATMEGA_UDINT_SOFE (1 << 2)
125 #define	ATMEGA_UDINT_EORSTE (1 << 3)
126 #define	ATMEGA_UDINT_WAKEUPE (1 << 4)
127 #define	ATMEGA_UDINT_EORSME (1 << 5)
128 #define	ATMEGA_UDINT_UPRSME (1 << 6)
129 
130 #define	ATMEGA_UDINT 0xE1		/* USB device interrupt status */
131 #define	ATMEGA_UDINT_SUSPI (1 << 0)
132 #define	ATMEGA_UDINT_MSOFI (1 << 1)
133 #define	ATMEGA_UDINT_SOFI (1 << 2)
134 #define	ATMEGA_UDINT_EORSTI (1 << 3)
135 #define	ATMEGA_UDINT_WAKEUPI (1 << 4)
136 #define	ATMEGA_UDINT_EORSMI (1 << 5)
137 #define	ATMEGA_UDINT_UPRSMI (1 << 6)
138 
139 #define	ATMEGA_UDCON 0xE0		/* USB device connection register */
140 #define	ATMEGA_UDCON_DETACH (1 << 0)
141 #define	ATMEGA_UDCON_RMWKUP (1 << 1)
142 #define	ATMEGA_UDCON_LSM (1 << 2)
143 #define	ATMEGA_UDCON_RSTCPU (1 << 3)
144 
145 #define	ATMEGA_OTGINT 0xDF
146 
147 #define	ATMEGA_OTGCON 0xDD
148 #define	ATMEGA_OTGCON_VBUSRQC (1 << 0)
149 #define	ATMEGA_OTGCON_VBUSREQ (1 << 1)
150 #define	ATMEGA_OTGCON_VBUSHWC (1 << 2)
151 #define	ATMEGA_OTGCON_SRPSEL (1 << 3)
152 #define	ATMEGA_OTGCON_SRPREQ (1 << 4)
153 #define	ATMEGA_OTGCON_HNPREQ (1 << 5)
154 
155 #define	ATMEGA_USBINT 0xDA
156 #define	ATMEGA_USBINT_VBUSTI (1 << 0)	/* USB VBUS interrupt */
157 #define	ATMEGA_USBINT_IDI (1 << 1)	/* USB ID interrupt */
158 
159 #define	ATMEGA_USBSTA 0xD9
160 #define	ATMEGA_USBSTA_VBUS (1 << 0)
161 #define	ATMEGA_USBSTA_ID (1 << 1)
162 
163 #define	ATMEGA_USBCON 0xD8
164 #define	ATMEGA_USBCON_VBUSTE (1 << 0)
165 #define	ATMEGA_USBCON_IDE (1 << 1)
166 #define	ATMEGA_USBCON_OTGPADE (1 << 4)
167 #define	ATMEGA_USBCON_FRZCLK (1 << 5)
168 #define	ATMEGA_USBCON_USBE (1 << 7)
169 
170 #define	ATMEGA_UHWCON 0xD7
171 #define	ATMEGA_UHWCON_UVREGE (1 << 0)
172 #define	ATMEGA_UHWCON_UVCONE (1 << 4)
173 #define	ATMEGA_UHWCON_UIDE (1 << 6)
174 #define	ATMEGA_UHWCON_UIMOD (1 << 7)
175 
176 #define	ATMEGA_READ_1(sc, reg) \
177   bus_space_read_1((sc)->sc_io_tag, (sc)->sc_io_hdl, reg)
178 
179 #define	ATMEGA_WRITE_1(sc, reg, data) \
180   bus_space_write_1((sc)->sc_io_tag, (sc)->sc_io_hdl, reg, data)
181 
182 #define	ATMEGA_WRITE_MULTI_1(sc, reg, ptr, len) \
183   bus_space_write_multi_1((sc)->sc_io_tag, (sc)->sc_io_hdl, reg, ptr, len)
184 
185 #define	ATMEGA_READ_MULTI_1(sc, reg, ptr, len) \
186   bus_space_read_multi_1((sc)->sc_io_tag, (sc)->sc_io_hdl, reg, ptr, len)
187 
188 /*
189  * Maximum number of endpoints supported:
190  */
191 #define	ATMEGA_EP_MAX 7
192 
193 struct atmegadci_td;
194 
195 typedef uint8_t (atmegadci_cmd_t)(struct atmegadci_td *td);
196 typedef void (atmegadci_clocks_t)(struct usb_bus *);
197 
198 struct atmegadci_td {
199 	struct atmegadci_td *obj_next;
200 	atmegadci_cmd_t *func;
201 	struct usb_page_cache *pc;
202 	uint32_t offset;
203 	uint32_t remainder;
204 	uint16_t max_packet_size;
205 	uint8_t	error:1;
206 	uint8_t	alt_next:1;
207 	uint8_t	short_pkt:1;
208 	uint8_t	support_multi_buffer:1;
209 	uint8_t	did_stall:1;
210 	uint8_t	ep_no:3;
211 };
212 
213 struct atmegadci_std_temp {
214 	atmegadci_cmd_t *func;
215 	struct usb_page_cache *pc;
216 	struct atmegadci_td *td;
217 	struct atmegadci_td *td_next;
218 	uint32_t len;
219 	uint32_t offset;
220 	uint16_t max_frame_size;
221 	uint8_t	short_pkt;
222 	/*
223          * short_pkt = 0: transfer should be short terminated
224          * short_pkt = 1: transfer should not be short terminated
225          */
226 	uint8_t	setup_alt_next;
227 	uint8_t did_stall;
228 };
229 
230 struct atmegadci_config_desc {
231 	struct usb_config_descriptor confd;
232 	struct usb_interface_descriptor ifcd;
233 	struct usb_endpoint_descriptor endpd;
234 } __packed;
235 
236 union atmegadci_hub_temp {
237 	uWord	wValue;
238 	struct usb_port_status ps;
239 };
240 
241 struct atmegadci_flags {
242 	uint8_t	change_connect:1;
243 	uint8_t	change_suspend:1;
244 	uint8_t	status_suspend:1;	/* set if suspended */
245 	uint8_t	status_vbus:1;		/* set if present */
246 	uint8_t	status_bus_reset:1;	/* set if reset complete */
247 	uint8_t	remote_wakeup:1;
248 	uint8_t	self_powered:1;
249 	uint8_t	clocks_off:1;
250 	uint8_t	port_powered:1;
251 	uint8_t	port_enabled:1;
252 	uint8_t	d_pulled_up:1;
253 };
254 
255 struct atmegadci_softc {
256 	struct usb_bus sc_bus;
257 	union atmegadci_hub_temp sc_hub_temp;
258 
259 	/* must be set by by the bus interface layer */
260 	atmegadci_clocks_t *sc_clocks_on;
261 	atmegadci_clocks_t *sc_clocks_off;
262 
263 	struct usb_device *sc_devices[ATMEGA_MAX_DEVICES];
264 	struct resource *sc_irq_res;
265 	void   *sc_intr_hdl;
266 	struct resource *sc_io_res;
267 	bus_space_tag_t sc_io_tag;
268 	bus_space_handle_t sc_io_hdl;
269 
270 	uint8_t	sc_rt_addr;		/* root hub address */
271 	uint8_t	sc_dv_addr;		/* device address */
272 	uint8_t	sc_conf;		/* root hub config */
273 
274 	uint8_t	sc_hub_idata[1];
275 
276 	struct atmegadci_flags sc_flags;
277 };
278 
279 /* prototypes */
280 
281 usb_error_t atmegadci_init(struct atmegadci_softc *sc);
282 void	atmegadci_uninit(struct atmegadci_softc *sc);
283 void	atmegadci_interrupt(struct atmegadci_softc *sc);
284 
285 #endif					/* _ATMEGADCI_H_ */
286