xref: /freebsd/sys/dev/usb/net/if_rue.c (revision e0c4386e)
1 /*-
2  * Copyright (c) 2001-2003, Shunsuke Akiyama <akiyama@FreeBSD.org>.
3  * Copyright (c) 1997, 1998, 1999, 2000 Bill Paul <wpaul@ee.columbia.edu>.
4  * All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25  * SUCH DAMAGE.
26  */
27 /*-
28  * SPDX-License-Identifier: BSD-4-Clause AND BSD-2-Clause
29  *
30  * Copyright (c) 1997, 1998, 1999, 2000
31  *	Bill Paul <wpaul@ee.columbia.edu>.  All rights reserved.
32  *
33  * Redistribution and use in source and binary forms, with or without
34  * modification, are permitted provided that the following conditions
35  * are met:
36  * 1. Redistributions of source code must retain the above copyright
37  *    notice, this list of conditions and the following disclaimer.
38  * 2. Redistributions in binary form must reproduce the above copyright
39  *    notice, this list of conditions and the following disclaimer in the
40  *    documentation and/or other materials provided with the distribution.
41  * 3. All advertising materials mentioning features or use of this software
42  *    must display the following acknowledgement:
43  *	This product includes software developed by Bill Paul.
44  * 4. Neither the name of the author nor the names of any co-contributors
45  *    may be used to endorse or promote products derived from this software
46  *    without specific prior written permission.
47  *
48  * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
49  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
50  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
51  * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
52  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
53  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
54  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
55  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
56  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
57  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
58  * THE POSSIBILITY OF SUCH DAMAGE.
59  */
60 
61 #include <sys/cdefs.h>
62 /*
63  * RealTek RTL8150 USB to fast ethernet controller driver.
64  * Datasheet is available from
65  * ftp://ftp.realtek.com.tw/lancard/data_sheet/8150/.
66  */
67 
68 #include <sys/stdint.h>
69 #include <sys/stddef.h>
70 #include <sys/param.h>
71 #include <sys/queue.h>
72 #include <sys/types.h>
73 #include <sys/systm.h>
74 #include <sys/socket.h>
75 #include <sys/kernel.h>
76 #include <sys/bus.h>
77 #include <sys/module.h>
78 #include <sys/lock.h>
79 #include <sys/mutex.h>
80 #include <sys/condvar.h>
81 #include <sys/sysctl.h>
82 #include <sys/sx.h>
83 #include <sys/unistd.h>
84 #include <sys/callout.h>
85 #include <sys/malloc.h>
86 #include <sys/priv.h>
87 
88 #include <net/if.h>
89 #include <net/if_var.h>
90 #include <net/if_media.h>
91 
92 #include <dev/mii/mii.h>
93 #include <dev/mii/miivar.h>
94 
95 #include <dev/usb/usb.h>
96 #include <dev/usb/usbdi.h>
97 #include <dev/usb/usbdi_util.h>
98 #include "usbdevs.h"
99 
100 #define	USB_DEBUG_VAR rue_debug
101 #include <dev/usb/usb_debug.h>
102 #include <dev/usb/usb_process.h>
103 
104 #include <dev/usb/net/usb_ethernet.h>
105 #include <dev/usb/net/if_ruereg.h>
106 
107 #include "miibus_if.h"
108 
109 #ifdef USB_DEBUG
110 static int rue_debug = 0;
111 
112 static SYSCTL_NODE(_hw_usb, OID_AUTO, rue, CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
113     "USB rue");
114 SYSCTL_INT(_hw_usb_rue, OID_AUTO, debug, CTLFLAG_RWTUN,
115     &rue_debug, 0, "Debug level");
116 #endif
117 
118 /*
119  * Various supported device vendors/products.
120  */
121 
122 static const STRUCT_USB_HOST_ID rue_devs[] = {
123 	{USB_VPI(USB_VENDOR_MELCO, USB_PRODUCT_MELCO_LUAKTX, 0)},
124 	{USB_VPI(USB_VENDOR_REALTEK, USB_PRODUCT_REALTEK_USBKR100, 0)},
125 	{USB_VPI(USB_VENDOR_OQO, USB_PRODUCT_OQO_ETHER01, 0)},
126 };
127 
128 /* prototypes */
129 
130 static device_probe_t rue_probe;
131 static device_attach_t rue_attach;
132 static device_detach_t rue_detach;
133 
134 static miibus_readreg_t rue_miibus_readreg;
135 static miibus_writereg_t rue_miibus_writereg;
136 static miibus_statchg_t rue_miibus_statchg;
137 
138 static usb_callback_t rue_intr_callback;
139 static usb_callback_t rue_bulk_read_callback;
140 static usb_callback_t rue_bulk_write_callback;
141 
142 static uether_fn_t rue_attach_post;
143 static uether_fn_t rue_init;
144 static uether_fn_t rue_stop;
145 static uether_fn_t rue_start;
146 static uether_fn_t rue_tick;
147 static uether_fn_t rue_setmulti;
148 static uether_fn_t rue_setpromisc;
149 
150 static int	rue_read_mem(struct rue_softc *, uint16_t, void *, int);
151 static int	rue_write_mem(struct rue_softc *, uint16_t, void *, int);
152 static uint8_t	rue_csr_read_1(struct rue_softc *, uint16_t);
153 static uint16_t	rue_csr_read_2(struct rue_softc *, uint16_t);
154 static int	rue_csr_write_1(struct rue_softc *, uint16_t, uint8_t);
155 static int	rue_csr_write_2(struct rue_softc *, uint16_t, uint16_t);
156 static int	rue_csr_write_4(struct rue_softc *, int, uint32_t);
157 
158 static void	rue_reset(struct rue_softc *);
159 static int	rue_ifmedia_upd(if_t);
160 static void	rue_ifmedia_sts(if_t, struct ifmediareq *);
161 
162 static const struct usb_config rue_config[RUE_N_TRANSFER] = {
163 	[RUE_BULK_DT_WR] = {
164 		.type = UE_BULK,
165 		.endpoint = UE_ADDR_ANY,
166 		.direction = UE_DIR_OUT,
167 		.bufsize = MCLBYTES,
168 		.flags = {.pipe_bof = 1,.force_short_xfer = 1,},
169 		.callback = rue_bulk_write_callback,
170 		.timeout = 10000,	/* 10 seconds */
171 	},
172 
173 	[RUE_BULK_DT_RD] = {
174 		.type = UE_BULK,
175 		.endpoint = UE_ADDR_ANY,
176 		.direction = UE_DIR_IN,
177 		.bufsize = (MCLBYTES + 4),
178 		.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
179 		.callback = rue_bulk_read_callback,
180 		.timeout = 0,	/* no timeout */
181 	},
182 
183 	[RUE_INTR_DT_RD] = {
184 		.type = UE_INTERRUPT,
185 		.endpoint = UE_ADDR_ANY,
186 		.direction = UE_DIR_IN,
187 		.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
188 		.bufsize = 0,	/* use wMaxPacketSize */
189 		.callback = rue_intr_callback,
190 	},
191 };
192 
193 static device_method_t rue_methods[] = {
194 	/* Device interface */
195 	DEVMETHOD(device_probe, rue_probe),
196 	DEVMETHOD(device_attach, rue_attach),
197 	DEVMETHOD(device_detach, rue_detach),
198 
199 	/* MII interface */
200 	DEVMETHOD(miibus_readreg, rue_miibus_readreg),
201 	DEVMETHOD(miibus_writereg, rue_miibus_writereg),
202 	DEVMETHOD(miibus_statchg, rue_miibus_statchg),
203 
204 	DEVMETHOD_END
205 };
206 
207 static driver_t rue_driver = {
208 	.name = "rue",
209 	.methods = rue_methods,
210 	.size = sizeof(struct rue_softc),
211 };
212 
213 DRIVER_MODULE_ORDERED(rue, uhub, rue_driver, NULL, NULL, SI_ORDER_ANY);
214 DRIVER_MODULE(miibus, rue, miibus_driver, NULL, NULL);
215 MODULE_DEPEND(rue, uether, 1, 1, 1);
216 MODULE_DEPEND(rue, usb, 1, 1, 1);
217 MODULE_DEPEND(rue, ether, 1, 1, 1);
218 MODULE_DEPEND(rue, miibus, 1, 1, 1);
219 MODULE_VERSION(rue, 1);
220 USB_PNP_HOST_INFO(rue_devs);
221 
222 static const struct usb_ether_methods rue_ue_methods = {
223 	.ue_attach_post = rue_attach_post,
224 	.ue_start = rue_start,
225 	.ue_init = rue_init,
226 	.ue_stop = rue_stop,
227 	.ue_tick = rue_tick,
228 	.ue_setmulti = rue_setmulti,
229 	.ue_setpromisc = rue_setpromisc,
230 	.ue_mii_upd = rue_ifmedia_upd,
231 	.ue_mii_sts = rue_ifmedia_sts,
232 };
233 
234 #define	RUE_SETBIT(sc, reg, x) \
235 	rue_csr_write_1(sc, reg, rue_csr_read_1(sc, reg) | (x))
236 
237 #define	RUE_CLRBIT(sc, reg, x) \
238 	rue_csr_write_1(sc, reg, rue_csr_read_1(sc, reg) & ~(x))
239 
240 static int
241 rue_read_mem(struct rue_softc *sc, uint16_t addr, void *buf, int len)
242 {
243 	struct usb_device_request req;
244 
245 	req.bmRequestType = UT_READ_VENDOR_DEVICE;
246 	req.bRequest = UR_SET_ADDRESS;
247 	USETW(req.wValue, addr);
248 	USETW(req.wIndex, 0);
249 	USETW(req.wLength, len);
250 
251 	return (uether_do_request(&sc->sc_ue, &req, buf, 1000));
252 }
253 
254 static int
255 rue_write_mem(struct rue_softc *sc, uint16_t addr, void *buf, int len)
256 {
257 	struct usb_device_request req;
258 
259 	req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
260 	req.bRequest = UR_SET_ADDRESS;
261 	USETW(req.wValue, addr);
262 	USETW(req.wIndex, 0);
263 	USETW(req.wLength, len);
264 
265 	return (uether_do_request(&sc->sc_ue, &req, buf, 1000));
266 }
267 
268 static uint8_t
269 rue_csr_read_1(struct rue_softc *sc, uint16_t reg)
270 {
271 	uint8_t val;
272 
273 	rue_read_mem(sc, reg, &val, 1);
274 	return (val);
275 }
276 
277 static uint16_t
278 rue_csr_read_2(struct rue_softc *sc, uint16_t reg)
279 {
280 	uint8_t val[2];
281 
282 	rue_read_mem(sc, reg, &val, 2);
283 	return (UGETW(val));
284 }
285 
286 static int
287 rue_csr_write_1(struct rue_softc *sc, uint16_t reg, uint8_t val)
288 {
289 	return (rue_write_mem(sc, reg, &val, 1));
290 }
291 
292 static int
293 rue_csr_write_2(struct rue_softc *sc, uint16_t reg, uint16_t val)
294 {
295 	uint8_t temp[2];
296 
297 	USETW(temp, val);
298 	return (rue_write_mem(sc, reg, &temp, 2));
299 }
300 
301 static int
302 rue_csr_write_4(struct rue_softc *sc, int reg, uint32_t val)
303 {
304 	uint8_t temp[4];
305 
306 	USETDW(temp, val);
307 	return (rue_write_mem(sc, reg, &temp, 4));
308 }
309 
310 static int
311 rue_miibus_readreg(device_t dev, int phy, int reg)
312 {
313 	struct rue_softc *sc = device_get_softc(dev);
314 	uint16_t rval;
315 	uint16_t ruereg;
316 	int locked;
317 
318 	if (phy != 0)		/* RTL8150 supports PHY == 0, only */
319 		return (0);
320 
321 	locked = mtx_owned(&sc->sc_mtx);
322 	if (!locked)
323 		RUE_LOCK(sc);
324 
325 	switch (reg) {
326 	case MII_BMCR:
327 		ruereg = RUE_BMCR;
328 		break;
329 	case MII_BMSR:
330 		ruereg = RUE_BMSR;
331 		break;
332 	case MII_ANAR:
333 		ruereg = RUE_ANAR;
334 		break;
335 	case MII_ANER:
336 		ruereg = RUE_AER;
337 		break;
338 	case MII_ANLPAR:
339 		ruereg = RUE_ANLP;
340 		break;
341 	case MII_PHYIDR1:
342 	case MII_PHYIDR2:
343 		rval = 0;
344 		goto done;
345 	default:
346 		if (RUE_REG_MIN <= reg && reg <= RUE_REG_MAX) {
347 			rval = rue_csr_read_1(sc, reg);
348 			goto done;
349 		}
350 		device_printf(sc->sc_ue.ue_dev, "bad phy register\n");
351 		rval = 0;
352 		goto done;
353 	}
354 
355 	rval = rue_csr_read_2(sc, ruereg);
356 done:
357 	if (!locked)
358 		RUE_UNLOCK(sc);
359 	return (rval);
360 }
361 
362 static int
363 rue_miibus_writereg(device_t dev, int phy, int reg, int data)
364 {
365 	struct rue_softc *sc = device_get_softc(dev);
366 	uint16_t ruereg;
367 	int locked;
368 
369 	if (phy != 0)		/* RTL8150 supports PHY == 0, only */
370 		return (0);
371 
372 	locked = mtx_owned(&sc->sc_mtx);
373 	if (!locked)
374 		RUE_LOCK(sc);
375 
376 	switch (reg) {
377 	case MII_BMCR:
378 		ruereg = RUE_BMCR;
379 		break;
380 	case MII_BMSR:
381 		ruereg = RUE_BMSR;
382 		break;
383 	case MII_ANAR:
384 		ruereg = RUE_ANAR;
385 		break;
386 	case MII_ANER:
387 		ruereg = RUE_AER;
388 		break;
389 	case MII_ANLPAR:
390 		ruereg = RUE_ANLP;
391 		break;
392 	case MII_PHYIDR1:
393 	case MII_PHYIDR2:
394 		goto done;
395 	default:
396 		if (RUE_REG_MIN <= reg && reg <= RUE_REG_MAX) {
397 			rue_csr_write_1(sc, reg, data);
398 			goto done;
399 		}
400 		device_printf(sc->sc_ue.ue_dev, " bad phy register\n");
401 		goto done;
402 	}
403 	rue_csr_write_2(sc, ruereg, data);
404 done:
405 	if (!locked)
406 		RUE_UNLOCK(sc);
407 	return (0);
408 }
409 
410 static void
411 rue_miibus_statchg(device_t dev)
412 {
413 	/*
414 	 * When the code below is enabled the card starts doing weird
415 	 * things after link going from UP to DOWN and back UP.
416 	 *
417 	 * Looks like some of register writes below messes up PHY
418 	 * interface.
419 	 *
420 	 * No visible regressions were found after commenting this code
421 	 * out, so that disable it for good.
422 	 */
423 #if 0
424 	struct rue_softc *sc = device_get_softc(dev);
425 	struct mii_data *mii = GET_MII(sc);
426 	uint16_t bmcr;
427 	int locked;
428 
429 	locked = mtx_owned(&sc->sc_mtx);
430 	if (!locked)
431 		RUE_LOCK(sc);
432 
433 	RUE_CLRBIT(sc, RUE_CR, (RUE_CR_RE | RUE_CR_TE));
434 
435 	bmcr = rue_csr_read_2(sc, RUE_BMCR);
436 
437 	if (IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX)
438 		bmcr |= RUE_BMCR_SPD_SET;
439 	else
440 		bmcr &= ~RUE_BMCR_SPD_SET;
441 
442 	if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX)
443 		bmcr |= RUE_BMCR_DUPLEX;
444 	else
445 		bmcr &= ~RUE_BMCR_DUPLEX;
446 
447 	rue_csr_write_2(sc, RUE_BMCR, bmcr);
448 
449 	RUE_SETBIT(sc, RUE_CR, (RUE_CR_RE | RUE_CR_TE));
450 
451 	if (!locked)
452 		RUE_UNLOCK(sc);
453 #endif
454 }
455 
456 static void
457 rue_setpromisc(struct usb_ether *ue)
458 {
459 	struct rue_softc *sc = uether_getsc(ue);
460 	if_t ifp = uether_getifp(ue);
461 
462 	RUE_LOCK_ASSERT(sc, MA_OWNED);
463 
464 	/* If we want promiscuous mode, set the allframes bit. */
465 	if (if_getflags(ifp) & IFF_PROMISC)
466 		RUE_SETBIT(sc, RUE_RCR, RUE_RCR_AAP);
467 	else
468 		RUE_CLRBIT(sc, RUE_RCR, RUE_RCR_AAP);
469 }
470 
471 static u_int
472 rue_hash_maddr(void *arg, struct sockaddr_dl *sdl, u_int cnt)
473 {
474 	uint32_t *hashes = arg;
475 	int h;
476 
477 	h = ether_crc32_be(LLADDR(sdl), ETHER_ADDR_LEN) >> 26;
478 	if (h < 32)
479 		hashes[0] |= (1 << h);
480 	else
481 		hashes[1] |= (1 << (h - 32));
482 
483 	return (1);
484 }
485 
486 /*
487  * Program the 64-bit multicast hash filter.
488  */
489 static void
490 rue_setmulti(struct usb_ether *ue)
491 {
492 	struct rue_softc *sc = uether_getsc(ue);
493 	if_t ifp = uether_getifp(ue);
494 	uint16_t rxcfg;
495 	uint32_t hashes[2] = { 0, 0 };
496 	int mcnt;
497 
498 	RUE_LOCK_ASSERT(sc, MA_OWNED);
499 
500 	rxcfg = rue_csr_read_2(sc, RUE_RCR);
501 
502 	if (if_getflags(ifp) & IFF_ALLMULTI || if_getflags(ifp) & IFF_PROMISC) {
503 		rxcfg |= (RUE_RCR_AAM | RUE_RCR_AAP);
504 		rxcfg &= ~RUE_RCR_AM;
505 		rue_csr_write_2(sc, RUE_RCR, rxcfg);
506 		rue_csr_write_4(sc, RUE_MAR0, 0xFFFFFFFF);
507 		rue_csr_write_4(sc, RUE_MAR4, 0xFFFFFFFF);
508 		return;
509 	}
510 
511 	/* first, zot all the existing hash bits */
512 	rue_csr_write_4(sc, RUE_MAR0, 0);
513 	rue_csr_write_4(sc, RUE_MAR4, 0);
514 
515 	/* now program new ones */
516 	mcnt = if_foreach_llmaddr(ifp, rue_hash_maddr, &hashes);
517 
518 	if (mcnt)
519 		rxcfg |= RUE_RCR_AM;
520 	else
521 		rxcfg &= ~RUE_RCR_AM;
522 
523 	rxcfg &= ~(RUE_RCR_AAM | RUE_RCR_AAP);
524 
525 	rue_csr_write_2(sc, RUE_RCR, rxcfg);
526 	rue_csr_write_4(sc, RUE_MAR0, hashes[0]);
527 	rue_csr_write_4(sc, RUE_MAR4, hashes[1]);
528 }
529 
530 static void
531 rue_reset(struct rue_softc *sc)
532 {
533 	int i;
534 
535 	rue_csr_write_1(sc, RUE_CR, RUE_CR_SOFT_RST);
536 
537 	for (i = 0; i != RUE_TIMEOUT; i++) {
538 		if (uether_pause(&sc->sc_ue, hz / 1000))
539 			break;
540 		if (!(rue_csr_read_1(sc, RUE_CR) & RUE_CR_SOFT_RST))
541 			break;
542 	}
543 	if (i == RUE_TIMEOUT)
544 		device_printf(sc->sc_ue.ue_dev, "reset never completed\n");
545 
546 	uether_pause(&sc->sc_ue, hz / 100);
547 }
548 
549 static void
550 rue_attach_post(struct usb_ether *ue)
551 {
552 	struct rue_softc *sc = uether_getsc(ue);
553 
554 	/* reset the adapter */
555 	rue_reset(sc);
556 
557 	/* get station address from the EEPROM */
558 	rue_read_mem(sc, RUE_EEPROM_IDR0, ue->ue_eaddr, ETHER_ADDR_LEN);
559 }
560 
561 /*
562  * Probe for a RTL8150 chip.
563  */
564 static int
565 rue_probe(device_t dev)
566 {
567 	struct usb_attach_arg *uaa = device_get_ivars(dev);
568 
569 	if (uaa->usb_mode != USB_MODE_HOST)
570 		return (ENXIO);
571 	if (uaa->info.bConfigIndex != RUE_CONFIG_IDX)
572 		return (ENXIO);
573 	if (uaa->info.bIfaceIndex != RUE_IFACE_IDX)
574 		return (ENXIO);
575 
576 	return (usbd_lookup_id_by_uaa(rue_devs, sizeof(rue_devs), uaa));
577 }
578 
579 /*
580  * Attach the interface. Allocate softc structures, do ifmedia
581  * setup and ethernet/BPF attach.
582  */
583 static int
584 rue_attach(device_t dev)
585 {
586 	struct usb_attach_arg *uaa = device_get_ivars(dev);
587 	struct rue_softc *sc = device_get_softc(dev);
588 	struct usb_ether *ue = &sc->sc_ue;
589 	uint8_t iface_index;
590 	int error;
591 
592 	device_set_usb_desc(dev);
593 	mtx_init(&sc->sc_mtx, device_get_nameunit(dev), NULL, MTX_DEF);
594 
595 	iface_index = RUE_IFACE_IDX;
596 	error = usbd_transfer_setup(uaa->device, &iface_index,
597 	    sc->sc_xfer, rue_config, RUE_N_TRANSFER,
598 	    sc, &sc->sc_mtx);
599 	if (error) {
600 		device_printf(dev, "allocating USB transfers failed\n");
601 		goto detach;
602 	}
603 
604 	ue->ue_sc = sc;
605 	ue->ue_dev = dev;
606 	ue->ue_udev = uaa->device;
607 	ue->ue_mtx = &sc->sc_mtx;
608 	ue->ue_methods = &rue_ue_methods;
609 
610 	error = uether_ifattach(ue);
611 	if (error) {
612 		device_printf(dev, "could not attach interface\n");
613 		goto detach;
614 	}
615 	return (0);			/* success */
616 
617 detach:
618 	rue_detach(dev);
619 	return (ENXIO);			/* failure */
620 }
621 
622 static int
623 rue_detach(device_t dev)
624 {
625 	struct rue_softc *sc = device_get_softc(dev);
626 	struct usb_ether *ue = &sc->sc_ue;
627 
628 	usbd_transfer_unsetup(sc->sc_xfer, RUE_N_TRANSFER);
629 	uether_ifdetach(ue);
630 	mtx_destroy(&sc->sc_mtx);
631 
632 	return (0);
633 }
634 
635 static void
636 rue_intr_callback(struct usb_xfer *xfer, usb_error_t error)
637 {
638 	struct rue_softc *sc = usbd_xfer_softc(xfer);
639 	if_t ifp = uether_getifp(&sc->sc_ue);
640 	struct rue_intrpkt pkt;
641 	struct usb_page_cache *pc;
642 	int actlen;
643 
644 	usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
645 
646 	switch (USB_GET_STATE(xfer)) {
647 	case USB_ST_TRANSFERRED:
648 
649 		if (ifp && (if_getdrvflags(ifp) & IFF_DRV_RUNNING) &&
650 		    actlen >= (int)sizeof(pkt)) {
651 			pc = usbd_xfer_get_frame(xfer, 0);
652 			usbd_copy_out(pc, 0, &pkt, sizeof(pkt));
653 
654 			if_inc_counter(ifp, IFCOUNTER_IERRORS, pkt.rue_rxlost_cnt);
655 			if_inc_counter(ifp, IFCOUNTER_IERRORS, pkt.rue_crcerr_cnt);
656 			if_inc_counter(ifp, IFCOUNTER_COLLISIONS, pkt.rue_col_cnt);
657 		}
658 		/* FALLTHROUGH */
659 	case USB_ST_SETUP:
660 tr_setup:
661 		usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
662 		usbd_transfer_submit(xfer);
663 		return;
664 
665 	default:			/* Error */
666 		if (error != USB_ERR_CANCELLED) {
667 			/* try to clear stall first */
668 			usbd_xfer_set_stall(xfer);
669 			goto tr_setup;
670 		}
671 		return;
672 	}
673 }
674 
675 static void
676 rue_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error)
677 {
678 	struct rue_softc *sc = usbd_xfer_softc(xfer);
679 	struct usb_ether *ue = &sc->sc_ue;
680 	if_t ifp = uether_getifp(ue);
681 	struct usb_page_cache *pc;
682 	uint16_t status;
683 	int actlen;
684 
685 	usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
686 
687 	switch (USB_GET_STATE(xfer)) {
688 	case USB_ST_TRANSFERRED:
689 
690 		if (actlen < 4) {
691 			if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
692 			goto tr_setup;
693 		}
694 		pc = usbd_xfer_get_frame(xfer, 0);
695 		usbd_copy_out(pc, actlen - 4, &status, sizeof(status));
696 		actlen -= 4;
697 
698 		/* check receive packet was valid or not */
699 		status = le16toh(status);
700 		if ((status & RUE_RXSTAT_VALID) == 0) {
701 			if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
702 			goto tr_setup;
703 		}
704 		uether_rxbuf(ue, pc, 0, actlen);
705 		/* FALLTHROUGH */
706 	case USB_ST_SETUP:
707 tr_setup:
708 		usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
709 		usbd_transfer_submit(xfer);
710 		uether_rxflush(ue);
711 		return;
712 
713 	default:			/* Error */
714 		DPRINTF("bulk read error, %s\n",
715 		    usbd_errstr(error));
716 
717 		if (error != USB_ERR_CANCELLED) {
718 			/* try to clear stall first */
719 			usbd_xfer_set_stall(xfer);
720 			goto tr_setup;
721 		}
722 		return;
723 	}
724 }
725 
726 static void
727 rue_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error)
728 {
729 	struct rue_softc *sc = usbd_xfer_softc(xfer);
730 	if_t ifp = uether_getifp(&sc->sc_ue);
731 	struct usb_page_cache *pc;
732 	struct mbuf *m;
733 	int temp_len;
734 
735 	switch (USB_GET_STATE(xfer)) {
736 	case USB_ST_TRANSFERRED:
737 		DPRINTFN(11, "transfer complete\n");
738 		if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1);
739 
740 		/* FALLTHROUGH */
741 	case USB_ST_SETUP:
742 tr_setup:
743 		if ((sc->sc_flags & RUE_FLAG_LINK) == 0) {
744 			/*
745 			 * don't send anything if there is no link !
746 			 */
747 			return;
748 		}
749 		m = if_dequeue(ifp);
750 
751 		if (m == NULL)
752 			return;
753 		if (m->m_pkthdr.len > MCLBYTES)
754 			m->m_pkthdr.len = MCLBYTES;
755 		temp_len = m->m_pkthdr.len;
756 
757 		pc = usbd_xfer_get_frame(xfer, 0);
758 		usbd_m_copy_in(pc, 0, m, 0, m->m_pkthdr.len);
759 
760 		/*
761 		 * This is an undocumented behavior.
762 		 * RTL8150 chip doesn't send frame length smaller than
763 		 * RUE_MIN_FRAMELEN (60) byte packet.
764 		 */
765 		if (temp_len < RUE_MIN_FRAMELEN) {
766 			usbd_frame_zero(pc, temp_len,
767 			    RUE_MIN_FRAMELEN - temp_len);
768 			temp_len = RUE_MIN_FRAMELEN;
769 		}
770 		usbd_xfer_set_frame_len(xfer, 0, temp_len);
771 
772 		/*
773 		 * if there's a BPF listener, bounce a copy
774 		 * of this frame to him:
775 		 */
776 		BPF_MTAP(ifp, m);
777 
778 		m_freem(m);
779 
780 		usbd_transfer_submit(xfer);
781 
782 		return;
783 
784 	default:			/* Error */
785 		DPRINTFN(11, "transfer error, %s\n",
786 		    usbd_errstr(error));
787 
788 		if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
789 
790 		if (error != USB_ERR_CANCELLED) {
791 			/* try to clear stall first */
792 			usbd_xfer_set_stall(xfer);
793 			goto tr_setup;
794 		}
795 		return;
796 	}
797 }
798 
799 static void
800 rue_tick(struct usb_ether *ue)
801 {
802 	struct rue_softc *sc = uether_getsc(ue);
803 	struct mii_data *mii = GET_MII(sc);
804 
805 	RUE_LOCK_ASSERT(sc, MA_OWNED);
806 
807 	mii_tick(mii);
808 	if ((sc->sc_flags & RUE_FLAG_LINK) == 0
809 	    && mii->mii_media_status & IFM_ACTIVE &&
810 	    IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
811 		sc->sc_flags |= RUE_FLAG_LINK;
812 		rue_start(ue);
813 	}
814 }
815 
816 static void
817 rue_start(struct usb_ether *ue)
818 {
819 	struct rue_softc *sc = uether_getsc(ue);
820 
821 	/*
822 	 * start the USB transfers, if not already started:
823 	 */
824 	usbd_transfer_start(sc->sc_xfer[RUE_INTR_DT_RD]);
825 	usbd_transfer_start(sc->sc_xfer[RUE_BULK_DT_RD]);
826 	usbd_transfer_start(sc->sc_xfer[RUE_BULK_DT_WR]);
827 }
828 
829 static void
830 rue_init(struct usb_ether *ue)
831 {
832 	struct rue_softc *sc = uether_getsc(ue);
833 	if_t ifp = uether_getifp(ue);
834 
835 	RUE_LOCK_ASSERT(sc, MA_OWNED);
836 
837 	/*
838 	 * Cancel pending I/O
839 	 */
840 	rue_reset(sc);
841 
842 	/* Set MAC address */
843 	rue_write_mem(sc, RUE_IDR0, if_getlladdr(ifp), ETHER_ADDR_LEN);
844 
845 	rue_stop(ue);
846 
847 	/*
848 	 * Set the initial TX and RX configuration.
849 	 */
850 	rue_csr_write_1(sc, RUE_TCR, RUE_TCR_CONFIG);
851 	rue_csr_write_2(sc, RUE_RCR, RUE_RCR_CONFIG|RUE_RCR_AB);
852 
853 	/* Load the multicast filter */
854 	rue_setpromisc(ue);
855 	/* Load the multicast filter. */
856 	rue_setmulti(ue);
857 
858 	/* Enable RX and TX */
859 	rue_csr_write_1(sc, RUE_CR, (RUE_CR_TE | RUE_CR_RE | RUE_CR_EP3CLREN));
860 
861 	usbd_xfer_set_stall(sc->sc_xfer[RUE_BULK_DT_WR]);
862 
863 	if_setdrvflagbits(ifp, IFF_DRV_RUNNING, 0);
864 	rue_start(ue);
865 }
866 
867 /*
868  * Set media options.
869  */
870 static int
871 rue_ifmedia_upd(if_t ifp)
872 {
873 	struct rue_softc *sc = if_getsoftc(ifp);
874 	struct mii_data *mii = GET_MII(sc);
875 	struct mii_softc *miisc;
876 	int error;
877 
878 	RUE_LOCK_ASSERT(sc, MA_OWNED);
879 
880         sc->sc_flags &= ~RUE_FLAG_LINK;
881 	LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
882 		PHY_RESET(miisc);
883 	error = mii_mediachg(mii);
884 	return (error);
885 }
886 
887 /*
888  * Report current media status.
889  */
890 static void
891 rue_ifmedia_sts(if_t ifp, struct ifmediareq *ifmr)
892 {
893 	struct rue_softc *sc = if_getsoftc(ifp);
894 	struct mii_data *mii = GET_MII(sc);
895 
896 	RUE_LOCK(sc);
897 	mii_pollstat(mii);
898 	ifmr->ifm_active = mii->mii_media_active;
899 	ifmr->ifm_status = mii->mii_media_status;
900 	RUE_UNLOCK(sc);
901 }
902 
903 static void
904 rue_stop(struct usb_ether *ue)
905 {
906 	struct rue_softc *sc = uether_getsc(ue);
907 	if_t ifp = uether_getifp(ue);
908 
909 	RUE_LOCK_ASSERT(sc, MA_OWNED);
910 
911 	if_setdrvflagbits(ifp, 0, IFF_DRV_RUNNING);
912 	sc->sc_flags &= ~RUE_FLAG_LINK;
913 
914 	/*
915 	 * stop all the transfers, if not already stopped:
916 	 */
917 	usbd_transfer_stop(sc->sc_xfer[RUE_BULK_DT_WR]);
918 	usbd_transfer_stop(sc->sc_xfer[RUE_BULK_DT_RD]);
919 	usbd_transfer_stop(sc->sc_xfer[RUE_INTR_DT_RD]);
920 
921 	rue_csr_write_1(sc, RUE_CR, 0x00);
922 
923 	rue_reset(sc);
924 }
925