1 /* $FreeBSD$ */ 2 /*- 3 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27 #ifndef _USB2_CONTROLLER_H_ 28 #define _USB2_CONTROLLER_H_ 29 30 /* defines */ 31 32 #define USB_BUS_DMA_TAG_MAX 8 33 34 /* structure prototypes */ 35 36 struct usb2_bus; 37 struct usb2_page; 38 struct usb2_pipe; 39 struct usb2_page_cache; 40 struct usb2_setup_params; 41 struct usb2_hw_ep_profile; 42 struct usb2_fs_isoc_schedule; 43 struct usb2_config_descriptor; 44 struct usb2_endpoint_descriptor; 45 46 /* typedefs */ 47 48 typedef void (usb2_bus_mem_sub_cb_t)(struct usb2_bus *bus, struct usb2_page_cache *pc, struct usb2_page *pg, uint32_t size, uint32_t align); 49 typedef void (usb2_bus_mem_cb_t)(struct usb2_bus *bus, usb2_bus_mem_sub_cb_t *scb); 50 51 /* 52 * The following structure is used to define all the USB BUS 53 * callbacks. 54 */ 55 struct usb2_bus_methods { 56 57 /* USB Device and Host mode - Mandatory */ 58 59 void (*pipe_init) (struct usb2_device *udev, struct usb2_endpoint_descriptor *edesc, struct usb2_pipe *pipe); 60 void (*xfer_setup) (struct usb2_setup_params *parm); 61 void (*xfer_unsetup) (struct usb2_xfer *xfer); 62 void (*get_dma_delay) (struct usb2_bus *, uint32_t *pdelay); 63 void (*device_suspend) (struct usb2_device *udev); 64 void (*device_resume) (struct usb2_device *udev); 65 void (*set_hw_power) (struct usb2_bus *bus); 66 /* 67 * The following flag is set if one or more control transfers are 68 * active: 69 */ 70 #define USB_HW_POWER_CONTROL 0x01 71 /* 72 * The following flag is set if one or more bulk transfers are 73 * active: 74 */ 75 #define USB_HW_POWER_BULK 0x02 76 /* 77 * The following flag is set if one or more interrupt transfers are 78 * active: 79 */ 80 #define USB_HW_POWER_INTERRUPT 0x04 81 /* 82 * The following flag is set if one or more isochronous transfers 83 * are active: 84 */ 85 #define USB_HW_POWER_ISOC 0x08 86 /* 87 * The following flag is set if one or more non-root-HUB devices 88 * are present on the given USB bus: 89 */ 90 #define USB_HW_POWER_NON_ROOT_HUB 0x10 91 92 /* USB Device mode only - Mandatory */ 93 94 void (*get_hw_ep_profile) (struct usb2_device *udev, const struct usb2_hw_ep_profile **ppf, uint8_t ep_addr); 95 void (*set_stall) (struct usb2_device *udev, struct usb2_xfer *xfer, struct usb2_pipe *pipe); 96 void (*clear_stall) (struct usb2_device *udev, struct usb2_pipe *pipe); 97 98 /* USB Device and Host mode - Optional */ 99 100 void (*roothub_exec) (struct usb2_bus *); 101 }; 102 103 /* 104 * The following structure is used to define all the USB pipe 105 * callbacks. 106 */ 107 struct usb2_pipe_methods { 108 109 /* Mandatory USB Device and Host mode callbacks: */ 110 111 void (*open) (struct usb2_xfer *xfer); 112 void (*close) (struct usb2_xfer *xfer); 113 114 void (*enter) (struct usb2_xfer *xfer); 115 void (*start) (struct usb2_xfer *xfer); 116 117 /* Optional */ 118 119 void *info; 120 121 /* Flags */ 122 123 uint8_t enter_is_cancelable:1; 124 uint8_t start_is_cancelable:1; 125 }; 126 127 /* 128 * The following structure keeps information about what a hardware USB 129 * endpoint supports. 130 */ 131 struct usb2_hw_ep_profile { 132 uint16_t max_in_frame_size; /* IN-token direction */ 133 uint16_t max_out_frame_size; /* OUT-token direction */ 134 uint8_t is_simplex:1; 135 uint8_t support_multi_buffer:1; 136 uint8_t support_bulk:1; 137 uint8_t support_control:1; 138 uint8_t support_interrupt:1; 139 uint8_t support_isochronous:1; 140 uint8_t support_in:1; /* IN-token is supported */ 141 uint8_t support_out:1; /* OUT-token is supported */ 142 }; 143 144 /* 145 * The following structure is used when trying to allocate hardware 146 * endpoints for an USB configuration in USB device side mode. 147 */ 148 struct usb2_hw_ep_scratch_sub { 149 const struct usb2_hw_ep_profile *pf; 150 uint16_t max_frame_size; 151 uint8_t hw_endpoint_out; 152 uint8_t hw_endpoint_in; 153 uint8_t needs_ep_type; 154 uint8_t needs_in:1; 155 uint8_t needs_out:1; 156 }; 157 158 /* 159 * The following structure is used when trying to allocate hardware 160 * endpoints for an USB configuration in USB device side mode. 161 */ 162 struct usb2_hw_ep_scratch { 163 struct usb2_hw_ep_scratch_sub ep[USB_EP_MAX]; 164 struct usb2_hw_ep_scratch_sub *ep_max; 165 struct usb2_config_descriptor *cd; 166 struct usb2_device *udev; 167 struct usb2_bus_methods *methods; 168 uint8_t bmOutAlloc[(USB_EP_MAX + 15) / 16]; 169 uint8_t bmInAlloc[(USB_EP_MAX + 15) / 16]; 170 }; 171 172 /* 173 * The following structure is used when generating USB descriptors 174 * from USB templates. 175 */ 176 struct usb2_temp_setup { 177 void *buf; 178 uint32_t size; 179 uint8_t usb2_speed; 180 uint8_t self_powered; 181 uint8_t bNumEndpoints; 182 uint8_t bInterfaceNumber; 183 uint8_t bAlternateSetting; 184 uint8_t bConfigurationValue; 185 usb2_error_t err; 186 }; 187 188 /* prototypes */ 189 190 void usb2_bus_mem_flush_all(struct usb2_bus *bus, usb2_bus_mem_cb_t *cb); 191 uint8_t usb2_bus_mem_alloc_all(struct usb2_bus *bus, bus_dma_tag_t dmat, usb2_bus_mem_cb_t *cb); 192 void usb2_bus_mem_free_all(struct usb2_bus *bus, usb2_bus_mem_cb_t *cb); 193 void usb2_bus_roothub_exec(struct usb2_bus *bus); 194 uint16_t usb2_isoc_time_expand(struct usb2_bus *bus, uint16_t isoc_time_curr); 195 uint16_t usb2_fs_isoc_schedule_isoc_time_expand(struct usb2_device *udev, struct usb2_fs_isoc_schedule **pp_start, struct usb2_fs_isoc_schedule **pp_end, uint16_t isoc_time); 196 uint8_t usb2_fs_isoc_schedule_alloc(struct usb2_fs_isoc_schedule *fss, uint8_t *pstart, uint16_t len); 197 198 #endif /* _USB2_CONTROLLER_H_ */ 199