xref: /freebsd/sys/dev/usb/usb_transfer.h (revision 3157ba21)
1 /* $FreeBSD$ */
2 /*-
3  * Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  */
26 
27 #ifndef _USB_TRANSFER_H_
28 #define	_USB_TRANSFER_H_
29 
30 /*
31  * The following structure defines the messages that is used to signal
32  * the "done_p" USB process.
33  */
34 struct usb_done_msg {
35 	struct usb_proc_msg hdr;
36 	struct usb_xfer_root *xroot;
37 };
38 
39 #define	USB_DMATAG_TO_XROOT(dpt)				\
40   ((struct usb_xfer_root *)(					\
41    ((uint8_t *)(dpt)) -						\
42    ((uint8_t *)&((struct usb_xfer_root *)0)->dma_parent_tag)))
43 
44 /*
45  * The following structure is used to keep information about memory
46  * that should be automatically freed at the moment all USB transfers
47  * have been freed.
48  */
49 struct usb_xfer_root {
50 	struct usb_dma_parent_tag dma_parent_tag;
51 #if USB_HAVE_BUSDMA
52 	struct usb_xfer_queue dma_q;
53 #endif
54 	struct usb_xfer_queue done_q;
55 	struct usb_done_msg done_m[2];
56 	struct cv cv_drain;
57 
58 	struct usb_process *done_p;	/* pointer to callback process */
59 	void   *memory_base;
60 	struct mtx *xfer_mtx;	/* cannot be changed during operation */
61 #if USB_HAVE_BUSDMA
62 	struct usb_page_cache *dma_page_cache_start;
63 	struct usb_page_cache *dma_page_cache_end;
64 #endif
65 	struct usb_page_cache *xfer_page_cache_start;
66 	struct usb_page_cache *xfer_page_cache_end;
67 	struct usb_bus *bus;		/* pointer to USB bus (cached) */
68 	struct usb_device *udev;	/* pointer to USB device */
69 
70 	usb_size_t memory_size;
71 	usb_size_t setup_refcount;
72 #if USB_HAVE_BUSDMA
73 	usb_frcount_t dma_nframes;	/* number of page caches to load */
74 	usb_frcount_t dma_currframe;	/* currect page cache number */
75 	usb_frlength_t dma_frlength_0;	/* length of page cache zero */
76 	uint8_t	dma_error;		/* set if virtual memory could not be
77 					 * loaded */
78 #endif
79 	uint8_t	done_sleep;		/* set if done thread is sleeping */
80 };
81 
82 /*
83  * The following structure is used when setting up an array of USB
84  * transfers.
85  */
86 struct usb_setup_params {
87 	struct usb_dma_tag *dma_tag_p;
88 	struct usb_page *dma_page_ptr;
89 	struct usb_page_cache *dma_page_cache_ptr;	/* these will be
90 							 * auto-freed */
91 	struct usb_page_cache *xfer_page_cache_ptr;	/* these will not be
92 							 * auto-freed */
93 	struct usb_device *udev;
94 	struct usb_xfer *curr_xfer;
95 	const struct usb_config *curr_setup;
96 	const struct usb_pipe_methods *methods;
97 	void   *buf;
98 	usb_frlength_t *xfer_length_ptr;
99 
100 	usb_size_t size[7];
101 	usb_frlength_t bufsize;
102 	usb_frlength_t bufsize_max;
103 
104 	uint16_t hc_max_frame_size;
105 	uint16_t hc_max_packet_size;
106 	uint8_t	hc_max_packet_count;
107 	enum usb_dev_speed speed;
108 	uint8_t	dma_tag_max;
109 	usb_error_t err;
110 };
111 
112 /* function prototypes */
113 
114 uint8_t	usbd_transfer_setup_sub_malloc(struct usb_setup_params *parm,
115 	    struct usb_page_cache **ppc, usb_size_t size, usb_size_t align,
116 	    usb_size_t count);
117 void	usb_command_wrapper(struct usb_xfer_queue *pq,
118 	    struct usb_xfer *xfer);
119 void	usbd_pipe_enter(struct usb_xfer *xfer);
120 void	usbd_pipe_start(struct usb_xfer_queue *pq);
121 void	usbd_transfer_dequeue(struct usb_xfer *xfer);
122 void	usbd_transfer_done(struct usb_xfer *xfer, usb_error_t error);
123 void	usbd_transfer_enqueue(struct usb_xfer_queue *pq,
124 	    struct usb_xfer *xfer);
125 void	usbd_transfer_setup_sub(struct usb_setup_params *parm);
126 void	usbd_ctrl_transfer_setup(struct usb_device *udev);
127 void	usbd_clear_data_toggle(struct usb_device *udev,
128 	    struct usb_endpoint *ep);
129 usb_callback_t usbd_do_request_callback;
130 usb_callback_t usb_handle_request_callback;
131 usb_callback_t usb_do_clear_stall_callback;
132 void	usbd_transfer_timeout_ms(struct usb_xfer *xfer,
133 	    void (*cb) (void *arg), usb_timeout_t ms);
134 usb_timeout_t usbd_get_dma_delay(struct usb_bus *bus);
135 void	usbd_transfer_power_ref(struct usb_xfer *xfer, int val);
136 
137 #endif					/* _USB_TRANSFER_H_ */
138