1 /*- 2 * SPDX-License-Identifier: BSD-4-Clause 3 * 4 * Copyright (c) 2018 The FreeBSD Foundation 5 * Copyright (c) 1992 Terrence R. Lambert. 6 * Copyright (c) 1982, 1987, 1990 The Regents of the University of California. 7 * All rights reserved. 8 * 9 * This code is derived from software contributed to Berkeley by 10 * William Jolitz. 11 * 12 * Portions of this software were developed by A. Joseph Koshy under 13 * sponsorship from the FreeBSD Foundation and Google, Inc. 14 * 15 * Redistribution and use in source and binary forms, with or without 16 * modification, are permitted provided that the following conditions 17 * are met: 18 * 1. Redistributions of source code must retain the above copyright 19 * notice, this list of conditions and the following disclaimer. 20 * 2. Redistributions in binary form must reproduce the above copyright 21 * notice, this list of conditions and the following disclaimer in the 22 * documentation and/or other materials provided with the distribution. 23 * 3. All advertising materials mentioning features or use of this software 24 * must display the following acknowledgement: 25 * This product includes software developed by the University of 26 * California, Berkeley and its contributors. 27 * 4. Neither the name of the University nor the names of its contributors 28 * may be used to endorse or promote products derived from this software 29 * without specific prior written permission. 30 * 31 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 32 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 33 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 34 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 35 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 39 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 40 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 41 * SUCH DAMAGE. 42 */ 43 44 #include <sys/cdefs.h> 45 #include "opt_apic.h" 46 #include "opt_atpic.h" 47 #include "opt_cpu.h" 48 #include "opt_ddb.h" 49 #include "opt_inet.h" 50 #include "opt_isa.h" 51 #include "opt_kstack_pages.h" 52 #include "opt_maxmem.h" 53 #include "opt_perfmon.h" 54 #include "opt_platform.h" 55 56 #include <sys/param.h> 57 #include <sys/proc.h> 58 #include <sys/systm.h> 59 #include <sys/bio.h> 60 #include <sys/buf.h> 61 #include <sys/bus.h> 62 #include <sys/callout.h> 63 #include <sys/cons.h> 64 #include <sys/cpu.h> 65 #include <sys/eventhandler.h> 66 #include <sys/exec.h> 67 #include <sys/imgact.h> 68 #include <sys/kdb.h> 69 #include <sys/kernel.h> 70 #include <sys/ktr.h> 71 #include <sys/linker.h> 72 #include <sys/lock.h> 73 #include <sys/malloc.h> 74 #include <sys/memrange.h> 75 #include <sys/msgbuf.h> 76 #include <sys/mutex.h> 77 #include <sys/pcpu.h> 78 #include <sys/ptrace.h> 79 #include <sys/reboot.h> 80 #include <sys/reg.h> 81 #include <sys/rwlock.h> 82 #include <sys/sched.h> 83 #include <sys/signalvar.h> 84 #include <sys/smp.h> 85 #include <sys/syscallsubr.h> 86 #include <sys/sysctl.h> 87 #include <sys/sysent.h> 88 #include <sys/sysproto.h> 89 #include <sys/ucontext.h> 90 #include <sys/vmmeter.h> 91 92 #include <vm/vm.h> 93 #include <vm/vm_param.h> 94 #include <vm/vm_extern.h> 95 #include <vm/vm_kern.h> 96 #include <vm/vm_page.h> 97 #include <vm/vm_map.h> 98 #include <vm/vm_object.h> 99 #include <vm/vm_pager.h> 100 #include <vm/vm_phys.h> 101 #include <vm/vm_dumpset.h> 102 103 #ifdef DDB 104 #ifndef KDB 105 #error KDB must be enabled in order for DDB to work! 106 #endif 107 #include <ddb/ddb.h> 108 #include <ddb/db_sym.h> 109 #endif 110 111 #include <isa/rtc.h> 112 113 #include <net/netisr.h> 114 115 #include <dev/smbios/smbios.h> 116 117 #include <machine/bootinfo.h> 118 #include <machine/clock.h> 119 #include <machine/cpu.h> 120 #include <machine/cputypes.h> 121 #include <machine/intr_machdep.h> 122 #include <x86/mca.h> 123 #include <machine/md_var.h> 124 #include <machine/metadata.h> 125 #include <machine/pc/bios.h> 126 #include <machine/pcb.h> 127 #include <machine/pcb_ext.h> 128 #include <machine/proc.h> 129 #include <machine/sigframe.h> 130 #include <machine/specialreg.h> 131 #include <machine/sysarch.h> 132 #include <machine/trap.h> 133 #include <x86/ucode.h> 134 #include <machine/vm86.h> 135 #include <x86/init.h> 136 #ifdef PERFMON 137 #include <machine/perfmon.h> 138 #endif 139 #ifdef SMP 140 #include <machine/smp.h> 141 #endif 142 #ifdef FDT 143 #include <x86/fdt.h> 144 #endif 145 146 #ifdef DEV_APIC 147 #include <x86/apicvar.h> 148 #endif 149 150 #ifdef DEV_ISA 151 #include <x86/isa/icu.h> 152 #endif 153 154 /* Sanity check for __curthread() */ 155 CTASSERT(offsetof(struct pcpu, pc_curthread) == 0); 156 157 register_t init386(int first); 158 void dblfault_handler(void); 159 void identify_cpu(void); 160 161 static void cpu_startup(void *); 162 SYSINIT(cpu, SI_SUB_CPU, SI_ORDER_FIRST, cpu_startup, NULL); 163 164 /* Intel ICH registers */ 165 #define ICH_PMBASE 0x400 166 #define ICH_SMI_EN ICH_PMBASE + 0x30 167 168 int _udatasel, _ucodesel; 169 u_int basemem; 170 static int above4g_allow = 1; 171 static int above24g_allow = 0; 172 173 int cold = 1; 174 175 long Maxmem = 0; 176 long realmem = 0; 177 int late_console = 1; 178 179 #ifdef PAE 180 FEATURE(pae, "Physical Address Extensions"); 181 #endif 182 183 struct kva_md_info kmi; 184 185 static struct trapframe proc0_tf; 186 struct pcpu __pcpu[MAXCPU]; 187 188 static void i386_clock_source_init(void); 189 190 struct mtx icu_lock; 191 192 struct mem_range_softc mem_range_softc; 193 194 extern char start_exceptions[], end_exceptions[]; 195 196 extern struct sysentvec elf32_freebsd_sysvec; 197 198 /* Default init_ops implementation. */ 199 struct init_ops init_ops = { 200 .early_clock_source_init = i386_clock_source_init, 201 .early_delay = i8254_delay, 202 }; 203 204 static void 205 i386_clock_source_init(void) 206 { 207 i8254_init(); 208 } 209 210 static void 211 cpu_startup(void *dummy) 212 { 213 uintmax_t memsize; 214 char *sysenv; 215 216 /* 217 * On MacBooks, we need to disallow the legacy USB circuit to 218 * generate an SMI# because this can cause several problems, 219 * namely: incorrect CPU frequency detection and failure to 220 * start the APs. 221 * We do this by disabling a bit in the SMI_EN (SMI Control and 222 * Enable register) of the Intel ICH LPC Interface Bridge. 223 */ 224 sysenv = kern_getenv("smbios.system.product"); 225 if (sysenv != NULL) { 226 if (strncmp(sysenv, "MacBook1,1", 10) == 0 || 227 strncmp(sysenv, "MacBook3,1", 10) == 0 || 228 strncmp(sysenv, "MacBook4,1", 10) == 0 || 229 strncmp(sysenv, "MacBookPro1,1", 13) == 0 || 230 strncmp(sysenv, "MacBookPro1,2", 13) == 0 || 231 strncmp(sysenv, "MacBookPro3,1", 13) == 0 || 232 strncmp(sysenv, "MacBookPro4,1", 13) == 0 || 233 strncmp(sysenv, "Macmini1,1", 10) == 0) { 234 if (bootverbose) 235 printf("Disabling LEGACY_USB_EN bit on " 236 "Intel ICH.\n"); 237 outl(ICH_SMI_EN, inl(ICH_SMI_EN) & ~0x8); 238 } 239 freeenv(sysenv); 240 } 241 242 /* 243 * Good {morning,afternoon,evening,night}. 244 */ 245 startrtclock(); 246 printcpuinfo(); 247 panicifcpuunsupported(); 248 #ifdef PERFMON 249 perfmon_init(); 250 #endif 251 252 /* 253 * Display physical memory if SMBIOS reports reasonable amount. 254 */ 255 memsize = 0; 256 sysenv = kern_getenv("smbios.memory.enabled"); 257 if (sysenv != NULL) { 258 memsize = (uintmax_t)strtoul(sysenv, (char **)NULL, 10) << 10; 259 freeenv(sysenv); 260 } 261 if (memsize < ptoa((uintmax_t)vm_free_count())) 262 memsize = ptoa((uintmax_t)Maxmem); 263 printf("real memory = %ju (%ju MB)\n", memsize, memsize >> 20); 264 realmem = atop(memsize); 265 266 /* 267 * Display any holes after the first chunk of extended memory. 268 */ 269 if (bootverbose) { 270 int indx; 271 272 printf("Physical memory chunk(s):\n"); 273 for (indx = 0; phys_avail[indx + 1] != 0; indx += 2) { 274 vm_paddr_t size; 275 276 size = phys_avail[indx + 1] - phys_avail[indx]; 277 printf( 278 "0x%016jx - 0x%016jx, %ju bytes (%ju pages)\n", 279 (uintmax_t)phys_avail[indx], 280 (uintmax_t)phys_avail[indx + 1] - 1, 281 (uintmax_t)size, (uintmax_t)size / PAGE_SIZE); 282 } 283 } 284 285 vm_ksubmap_init(&kmi); 286 287 printf("avail memory = %ju (%ju MB)\n", 288 ptoa((uintmax_t)vm_free_count()), 289 ptoa((uintmax_t)vm_free_count()) / 1048576); 290 291 /* 292 * Set up buffers, so they can be used to read disk labels. 293 */ 294 bufinit(); 295 vm_pager_bufferinit(); 296 cpu_setregs(); 297 } 298 299 void 300 cpu_setregs(void) 301 { 302 unsigned int cr0; 303 304 cr0 = rcr0(); 305 306 /* 307 * CR0_MP, CR0_NE and CR0_TS are set for NPX (FPU) support: 308 * 309 * Prepare to trap all ESC (i.e., NPX) instructions and all WAIT 310 * instructions. We must set the CR0_MP bit and use the CR0_TS 311 * bit to control the trap, because setting the CR0_EM bit does 312 * not cause WAIT instructions to trap. It's important to trap 313 * WAIT instructions - otherwise the "wait" variants of no-wait 314 * control instructions would degenerate to the "no-wait" variants 315 * after FP context switches but work correctly otherwise. It's 316 * particularly important to trap WAITs when there is no NPX - 317 * otherwise the "wait" variants would always degenerate. 318 * 319 * Try setting CR0_NE to get correct error reporting on 486DX's. 320 * Setting it should fail or do nothing on lesser processors. 321 */ 322 cr0 |= CR0_MP | CR0_NE | CR0_TS | CR0_WP | CR0_AM; 323 load_cr0(cr0); 324 load_gs(_udatasel); 325 } 326 327 u_long bootdev; /* not a struct cdev *- encoding is different */ 328 SYSCTL_ULONG(_machdep, OID_AUTO, guessed_bootdev, 329 CTLFLAG_RD, &bootdev, 0, "Maybe the Boot device (not in struct cdev *format)"); 330 331 /* 332 * Initialize 386 and configure to run kernel 333 */ 334 335 /* 336 * Initialize segments & interrupt table 337 */ 338 339 int _default_ldt; 340 341 struct mtx dt_lock; /* lock for GDT and LDT */ 342 343 union descriptor gdt0[NGDT]; /* initial global descriptor table */ 344 union descriptor *gdt = gdt0; /* global descriptor table */ 345 346 union descriptor *ldt; /* local descriptor table */ 347 348 static struct gate_descriptor idt0[NIDT]; 349 struct gate_descriptor *idt = &idt0[0]; /* interrupt descriptor table */ 350 351 static struct i386tss *dblfault_tss; 352 static char *dblfault_stack; 353 354 static struct i386tss common_tss0; 355 356 vm_offset_t proc0kstack; 357 358 /* 359 * software prototypes -- in more palatable form. 360 * 361 * GCODE_SEL through GUDATA_SEL must be in this order for syscall/sysret 362 * GUFS_SEL and GUGS_SEL must be in this order (swtch.s knows it) 363 */ 364 struct soft_segment_descriptor gdt_segs[] = { 365 /* GNULL_SEL 0 Null Descriptor */ 366 { .ssd_base = 0x0, 367 .ssd_limit = 0x0, 368 .ssd_type = 0, 369 .ssd_dpl = SEL_KPL, 370 .ssd_p = 0, 371 .ssd_xx = 0, .ssd_xx1 = 0, 372 .ssd_def32 = 0, 373 .ssd_gran = 0 }, 374 /* GPRIV_SEL 1 SMP Per-Processor Private Data Descriptor */ 375 { .ssd_base = 0x0, 376 .ssd_limit = 0xfffff, 377 .ssd_type = SDT_MEMRWA, 378 .ssd_dpl = SEL_KPL, 379 .ssd_p = 1, 380 .ssd_xx = 0, .ssd_xx1 = 0, 381 .ssd_def32 = 1, 382 .ssd_gran = 1 }, 383 /* GUFS_SEL 2 %fs Descriptor for user */ 384 { .ssd_base = 0x0, 385 .ssd_limit = 0xfffff, 386 .ssd_type = SDT_MEMRWA, 387 .ssd_dpl = SEL_UPL, 388 .ssd_p = 1, 389 .ssd_xx = 0, .ssd_xx1 = 0, 390 .ssd_def32 = 1, 391 .ssd_gran = 1 }, 392 /* GUGS_SEL 3 %gs Descriptor for user */ 393 { .ssd_base = 0x0, 394 .ssd_limit = 0xfffff, 395 .ssd_type = SDT_MEMRWA, 396 .ssd_dpl = SEL_UPL, 397 .ssd_p = 1, 398 .ssd_xx = 0, .ssd_xx1 = 0, 399 .ssd_def32 = 1, 400 .ssd_gran = 1 }, 401 /* GCODE_SEL 4 Code Descriptor for kernel */ 402 { .ssd_base = 0x0, 403 .ssd_limit = 0xfffff, 404 .ssd_type = SDT_MEMERA, 405 .ssd_dpl = SEL_KPL, 406 .ssd_p = 1, 407 .ssd_xx = 0, .ssd_xx1 = 0, 408 .ssd_def32 = 1, 409 .ssd_gran = 1 }, 410 /* GDATA_SEL 5 Data Descriptor for kernel */ 411 { .ssd_base = 0x0, 412 .ssd_limit = 0xfffff, 413 .ssd_type = SDT_MEMRWA, 414 .ssd_dpl = SEL_KPL, 415 .ssd_p = 1, 416 .ssd_xx = 0, .ssd_xx1 = 0, 417 .ssd_def32 = 1, 418 .ssd_gran = 1 }, 419 /* GUCODE_SEL 6 Code Descriptor for user */ 420 { .ssd_base = 0x0, 421 .ssd_limit = 0xfffff, 422 .ssd_type = SDT_MEMERA, 423 .ssd_dpl = SEL_UPL, 424 .ssd_p = 1, 425 .ssd_xx = 0, .ssd_xx1 = 0, 426 .ssd_def32 = 1, 427 .ssd_gran = 1 }, 428 /* GUDATA_SEL 7 Data Descriptor for user */ 429 { .ssd_base = 0x0, 430 .ssd_limit = 0xfffff, 431 .ssd_type = SDT_MEMRWA, 432 .ssd_dpl = SEL_UPL, 433 .ssd_p = 1, 434 .ssd_xx = 0, .ssd_xx1 = 0, 435 .ssd_def32 = 1, 436 .ssd_gran = 1 }, 437 /* GBIOSLOWMEM_SEL 8 BIOS access to realmode segment 0x40, must be #8 in GDT */ 438 { .ssd_base = 0x400, 439 .ssd_limit = 0xfffff, 440 .ssd_type = SDT_MEMRWA, 441 .ssd_dpl = SEL_KPL, 442 .ssd_p = 1, 443 .ssd_xx = 0, .ssd_xx1 = 0, 444 .ssd_def32 = 1, 445 .ssd_gran = 1 }, 446 /* GPROC0_SEL 9 Proc 0 Tss Descriptor */ 447 { 448 .ssd_base = 0x0, 449 .ssd_limit = sizeof(struct i386tss)-1, 450 .ssd_type = SDT_SYS386TSS, 451 .ssd_dpl = 0, 452 .ssd_p = 1, 453 .ssd_xx = 0, .ssd_xx1 = 0, 454 .ssd_def32 = 0, 455 .ssd_gran = 0 }, 456 /* GLDT_SEL 10 LDT Descriptor */ 457 { .ssd_base = 0, 458 .ssd_limit = sizeof(union descriptor) * NLDT - 1, 459 .ssd_type = SDT_SYSLDT, 460 .ssd_dpl = SEL_UPL, 461 .ssd_p = 1, 462 .ssd_xx = 0, .ssd_xx1 = 0, 463 .ssd_def32 = 0, 464 .ssd_gran = 0 }, 465 /* GUSERLDT_SEL 11 User LDT Descriptor per process */ 466 { .ssd_base = 0, 467 .ssd_limit = (512 * sizeof(union descriptor)-1), 468 .ssd_type = SDT_SYSLDT, 469 .ssd_dpl = 0, 470 .ssd_p = 1, 471 .ssd_xx = 0, .ssd_xx1 = 0, 472 .ssd_def32 = 0, 473 .ssd_gran = 0 }, 474 /* GPANIC_SEL 12 Panic Tss Descriptor */ 475 { .ssd_base = 0, 476 .ssd_limit = sizeof(struct i386tss)-1, 477 .ssd_type = SDT_SYS386TSS, 478 .ssd_dpl = 0, 479 .ssd_p = 1, 480 .ssd_xx = 0, .ssd_xx1 = 0, 481 .ssd_def32 = 0, 482 .ssd_gran = 0 }, 483 /* GBIOSCODE32_SEL 13 BIOS 32-bit interface (32bit Code) */ 484 { .ssd_base = 0, 485 .ssd_limit = 0xfffff, 486 .ssd_type = SDT_MEMERA, 487 .ssd_dpl = 0, 488 .ssd_p = 1, 489 .ssd_xx = 0, .ssd_xx1 = 0, 490 .ssd_def32 = 0, 491 .ssd_gran = 1 }, 492 /* GBIOSCODE16_SEL 14 BIOS 32-bit interface (16bit Code) */ 493 { .ssd_base = 0, 494 .ssd_limit = 0xfffff, 495 .ssd_type = SDT_MEMERA, 496 .ssd_dpl = 0, 497 .ssd_p = 1, 498 .ssd_xx = 0, .ssd_xx1 = 0, 499 .ssd_def32 = 0, 500 .ssd_gran = 1 }, 501 /* GBIOSDATA_SEL 15 BIOS 32-bit interface (Data) */ 502 { .ssd_base = 0, 503 .ssd_limit = 0xfffff, 504 .ssd_type = SDT_MEMRWA, 505 .ssd_dpl = 0, 506 .ssd_p = 1, 507 .ssd_xx = 0, .ssd_xx1 = 0, 508 .ssd_def32 = 1, 509 .ssd_gran = 1 }, 510 /* GBIOSUTIL_SEL 16 BIOS 16-bit interface (Utility) */ 511 { .ssd_base = 0, 512 .ssd_limit = 0xfffff, 513 .ssd_type = SDT_MEMRWA, 514 .ssd_dpl = 0, 515 .ssd_p = 1, 516 .ssd_xx = 0, .ssd_xx1 = 0, 517 .ssd_def32 = 0, 518 .ssd_gran = 1 }, 519 /* GBIOSARGS_SEL 17 BIOS 16-bit interface (Arguments) */ 520 { .ssd_base = 0, 521 .ssd_limit = 0xfffff, 522 .ssd_type = SDT_MEMRWA, 523 .ssd_dpl = 0, 524 .ssd_p = 1, 525 .ssd_xx = 0, .ssd_xx1 = 0, 526 .ssd_def32 = 0, 527 .ssd_gran = 1 }, 528 /* GNDIS_SEL 18 NDIS Descriptor */ 529 { .ssd_base = 0x0, 530 .ssd_limit = 0x0, 531 .ssd_type = 0, 532 .ssd_dpl = 0, 533 .ssd_p = 0, 534 .ssd_xx = 0, .ssd_xx1 = 0, 535 .ssd_def32 = 0, 536 .ssd_gran = 0 }, 537 }; 538 539 static struct soft_segment_descriptor ldt_segs[] = { 540 /* Null Descriptor - overwritten by call gate */ 541 { .ssd_base = 0x0, 542 .ssd_limit = 0x0, 543 .ssd_type = 0, 544 .ssd_dpl = 0, 545 .ssd_p = 0, 546 .ssd_xx = 0, .ssd_xx1 = 0, 547 .ssd_def32 = 0, 548 .ssd_gran = 0 }, 549 /* Null Descriptor - overwritten by call gate */ 550 { .ssd_base = 0x0, 551 .ssd_limit = 0x0, 552 .ssd_type = 0, 553 .ssd_dpl = 0, 554 .ssd_p = 0, 555 .ssd_xx = 0, .ssd_xx1 = 0, 556 .ssd_def32 = 0, 557 .ssd_gran = 0 }, 558 /* Null Descriptor - overwritten by call gate */ 559 { .ssd_base = 0x0, 560 .ssd_limit = 0x0, 561 .ssd_type = 0, 562 .ssd_dpl = 0, 563 .ssd_p = 0, 564 .ssd_xx = 0, .ssd_xx1 = 0, 565 .ssd_def32 = 0, 566 .ssd_gran = 0 }, 567 /* Code Descriptor for user */ 568 { .ssd_base = 0x0, 569 .ssd_limit = 0xfffff, 570 .ssd_type = SDT_MEMERA, 571 .ssd_dpl = SEL_UPL, 572 .ssd_p = 1, 573 .ssd_xx = 0, .ssd_xx1 = 0, 574 .ssd_def32 = 1, 575 .ssd_gran = 1 }, 576 /* Null Descriptor - overwritten by call gate */ 577 { .ssd_base = 0x0, 578 .ssd_limit = 0x0, 579 .ssd_type = 0, 580 .ssd_dpl = 0, 581 .ssd_p = 0, 582 .ssd_xx = 0, .ssd_xx1 = 0, 583 .ssd_def32 = 0, 584 .ssd_gran = 0 }, 585 /* Data Descriptor for user */ 586 { .ssd_base = 0x0, 587 .ssd_limit = 0xfffff, 588 .ssd_type = SDT_MEMRWA, 589 .ssd_dpl = SEL_UPL, 590 .ssd_p = 1, 591 .ssd_xx = 0, .ssd_xx1 = 0, 592 .ssd_def32 = 1, 593 .ssd_gran = 1 }, 594 }; 595 596 size_t setidt_disp; 597 598 void 599 setidt(int idx, inthand_t *func, int typ, int dpl, int selec) 600 { 601 uintptr_t off; 602 603 off = func != NULL ? (uintptr_t)func + setidt_disp : 0; 604 setidt_nodisp(idx, off, typ, dpl, selec); 605 } 606 607 void 608 setidt_nodisp(int idx, uintptr_t off, int typ, int dpl, int selec) 609 { 610 struct gate_descriptor *ip; 611 612 ip = idt + idx; 613 ip->gd_looffset = off; 614 ip->gd_selector = selec; 615 ip->gd_stkcpy = 0; 616 ip->gd_xx = 0; 617 ip->gd_type = typ; 618 ip->gd_dpl = dpl; 619 ip->gd_p = 1; 620 ip->gd_hioffset = ((u_int)off) >> 16 ; 621 } 622 623 extern inthand_t 624 IDTVEC(div), IDTVEC(dbg), IDTVEC(nmi), IDTVEC(bpt), IDTVEC(ofl), 625 IDTVEC(bnd), IDTVEC(ill), IDTVEC(dna), IDTVEC(fpusegm), 626 IDTVEC(tss), IDTVEC(missing), IDTVEC(stk), IDTVEC(prot), 627 IDTVEC(page), IDTVEC(mchk), IDTVEC(rsvd), IDTVEC(fpu), IDTVEC(align), 628 IDTVEC(xmm), 629 #ifdef KDTRACE_HOOKS 630 IDTVEC(dtrace_ret), 631 #endif 632 #ifdef XENHVM 633 IDTVEC(xen_intr_upcall), 634 #endif 635 IDTVEC(int0x80_syscall); 636 637 #ifdef DDB 638 /* 639 * Display the index and function name of any IDT entries that don't use 640 * the default 'rsvd' entry point. 641 */ 642 DB_SHOW_COMMAND_FLAGS(idt, db_show_idt, DB_CMD_MEMSAFE) 643 { 644 struct gate_descriptor *ip; 645 int idx; 646 uintptr_t func, func_trm; 647 bool trm; 648 649 ip = idt; 650 for (idx = 0; idx < NIDT && !db_pager_quit; idx++) { 651 if (ip->gd_type == SDT_SYSTASKGT) { 652 db_printf("%3d\t<TASK>\n", idx); 653 } else { 654 func = (ip->gd_hioffset << 16 | ip->gd_looffset); 655 if (func >= PMAP_TRM_MIN_ADDRESS) { 656 func_trm = func; 657 func -= setidt_disp; 658 trm = true; 659 } else 660 trm = false; 661 if (func != (uintptr_t)&IDTVEC(rsvd)) { 662 db_printf("%3d\t", idx); 663 db_printsym(func, DB_STGY_PROC); 664 if (trm) 665 db_printf(" (trampoline %#x)", 666 func_trm); 667 db_printf("\n"); 668 } 669 } 670 ip++; 671 } 672 } 673 674 /* Show privileged registers. */ 675 DB_SHOW_COMMAND_FLAGS(sysregs, db_show_sysregs, DB_CMD_MEMSAFE) 676 { 677 uint64_t idtr, gdtr; 678 679 idtr = ridt(); 680 db_printf("idtr\t0x%08x/%04x\n", 681 (u_int)(idtr >> 16), (u_int)idtr & 0xffff); 682 gdtr = rgdt(); 683 db_printf("gdtr\t0x%08x/%04x\n", 684 (u_int)(gdtr >> 16), (u_int)gdtr & 0xffff); 685 db_printf("ldtr\t0x%04x\n", rldt()); 686 db_printf("tr\t0x%04x\n", rtr()); 687 db_printf("cr0\t0x%08x\n", rcr0()); 688 db_printf("cr2\t0x%08x\n", rcr2()); 689 db_printf("cr3\t0x%08x\n", rcr3()); 690 db_printf("cr4\t0x%08x\n", rcr4()); 691 if (rcr4() & CR4_XSAVE) 692 db_printf("xcr0\t0x%016llx\n", rxcr(0)); 693 if (amd_feature & (AMDID_NX | AMDID_LM)) 694 db_printf("EFER\t0x%016llx\n", rdmsr(MSR_EFER)); 695 if (cpu_feature2 & (CPUID2_VMX | CPUID2_SMX)) 696 db_printf("FEATURES_CTL\t0x%016llx\n", 697 rdmsr(MSR_IA32_FEATURE_CONTROL)); 698 if (((cpu_vendor_id == CPU_VENDOR_INTEL || 699 cpu_vendor_id == CPU_VENDOR_AMD) && CPUID_TO_FAMILY(cpu_id) >= 6) || 700 cpu_vendor_id == CPU_VENDOR_HYGON) 701 db_printf("DEBUG_CTL\t0x%016llx\n", rdmsr(MSR_DEBUGCTLMSR)); 702 if (cpu_feature & CPUID_PAT) 703 db_printf("PAT\t0x%016llx\n", rdmsr(MSR_PAT)); 704 } 705 706 DB_SHOW_COMMAND_FLAGS(dbregs, db_show_dbregs, DB_CMD_MEMSAFE) 707 { 708 709 db_printf("dr0\t0x%08x\n", rdr0()); 710 db_printf("dr1\t0x%08x\n", rdr1()); 711 db_printf("dr2\t0x%08x\n", rdr2()); 712 db_printf("dr3\t0x%08x\n", rdr3()); 713 db_printf("dr6\t0x%08x\n", rdr6()); 714 db_printf("dr7\t0x%08x\n", rdr7()); 715 } 716 717 DB_SHOW_COMMAND(frame, db_show_frame) 718 { 719 struct trapframe *frame; 720 721 frame = have_addr ? (struct trapframe *)addr : curthread->td_frame; 722 printf("ss %#x esp %#x efl %#x cs %#x eip %#x\n", 723 frame->tf_ss, frame->tf_esp, frame->tf_eflags, frame->tf_cs, 724 frame->tf_eip); 725 printf("err %#x trapno %d\n", frame->tf_err, frame->tf_trapno); 726 printf("ds %#x es %#x fs %#x\n", 727 frame->tf_ds, frame->tf_es, frame->tf_fs); 728 printf("eax %#x ecx %#x edx %#x ebx %#x\n", 729 frame->tf_eax, frame->tf_ecx, frame->tf_edx, frame->tf_ebx); 730 printf("ebp %#x esi %#x edi %#x\n", 731 frame->tf_ebp, frame->tf_esi, frame->tf_edi); 732 733 } 734 #endif 735 736 void 737 sdtossd(struct segment_descriptor *sd, struct soft_segment_descriptor *ssd) 738 { 739 ssd->ssd_base = (sd->sd_hibase << 24) | sd->sd_lobase; 740 ssd->ssd_limit = (sd->sd_hilimit << 16) | sd->sd_lolimit; 741 ssd->ssd_type = sd->sd_type; 742 ssd->ssd_dpl = sd->sd_dpl; 743 ssd->ssd_p = sd->sd_p; 744 ssd->ssd_def32 = sd->sd_def32; 745 ssd->ssd_gran = sd->sd_gran; 746 } 747 748 static int 749 add_physmap_entry(uint64_t base, uint64_t length, vm_paddr_t *physmap, 750 int *physmap_idxp) 751 { 752 uint64_t lim, ign; 753 int i, insert_idx, physmap_idx; 754 755 physmap_idx = *physmap_idxp; 756 757 if (length == 0) 758 return (1); 759 760 lim = 0x100000000; /* 4G */ 761 if (pae_mode && above4g_allow) 762 lim = above24g_allow ? -1ULL : 0x600000000; /* 24G */ 763 if (base >= lim) { 764 printf("%uK of memory above %uGB ignored, pae %d " 765 "above4g_allow %d above24g_allow %d\n", 766 (u_int)(length / 1024), (u_int)(lim >> 30), pae_mode, 767 above4g_allow, above24g_allow); 768 return (1); 769 } 770 if (base + length >= lim) { 771 ign = base + length - lim; 772 length -= ign; 773 printf("%uK of memory above %uGB ignored, pae %d " 774 "above4g_allow %d above24g_allow %d\n", 775 (u_int)(ign / 1024), (u_int)(lim >> 30), pae_mode, 776 above4g_allow, above24g_allow); 777 } 778 779 /* 780 * Find insertion point while checking for overlap. Start off by 781 * assuming the new entry will be added to the end. 782 */ 783 insert_idx = physmap_idx + 2; 784 for (i = 0; i <= physmap_idx; i += 2) { 785 if (base < physmap[i + 1]) { 786 if (base + length <= physmap[i]) { 787 insert_idx = i; 788 break; 789 } 790 if (boothowto & RB_VERBOSE) 791 printf( 792 "Overlapping memory regions, ignoring second region\n"); 793 return (1); 794 } 795 } 796 797 /* See if we can prepend to the next entry. */ 798 if (insert_idx <= physmap_idx && base + length == physmap[insert_idx]) { 799 physmap[insert_idx] = base; 800 return (1); 801 } 802 803 /* See if we can append to the previous entry. */ 804 if (insert_idx > 0 && base == physmap[insert_idx - 1]) { 805 physmap[insert_idx - 1] += length; 806 return (1); 807 } 808 809 physmap_idx += 2; 810 *physmap_idxp = physmap_idx; 811 if (physmap_idx == PHYS_AVAIL_ENTRIES) { 812 printf( 813 "Too many segments in the physical address map, giving up\n"); 814 return (0); 815 } 816 817 /* 818 * Move the last 'N' entries down to make room for the new 819 * entry if needed. 820 */ 821 for (i = physmap_idx; i > insert_idx; i -= 2) { 822 physmap[i] = physmap[i - 2]; 823 physmap[i + 1] = physmap[i - 1]; 824 } 825 826 /* Insert the new entry. */ 827 physmap[insert_idx] = base; 828 physmap[insert_idx + 1] = base + length; 829 return (1); 830 } 831 832 static int 833 add_smap_entry(struct bios_smap *smap, vm_paddr_t *physmap, int *physmap_idxp) 834 { 835 if (boothowto & RB_VERBOSE) 836 printf("SMAP type=%02x base=%016llx len=%016llx\n", 837 smap->type, smap->base, smap->length); 838 839 if (smap->type != SMAP_TYPE_MEMORY) 840 return (1); 841 842 return (add_physmap_entry(smap->base, smap->length, physmap, 843 physmap_idxp)); 844 } 845 846 static void 847 add_smap_entries(struct bios_smap *smapbase, vm_paddr_t *physmap, 848 int *physmap_idxp) 849 { 850 struct bios_smap *smap, *smapend; 851 u_int32_t smapsize; 852 /* 853 * Memory map from INT 15:E820. 854 * 855 * subr_module.c says: 856 * "Consumer may safely assume that size value precedes data." 857 * ie: an int32_t immediately precedes SMAP. 858 */ 859 smapsize = *((u_int32_t *)smapbase - 1); 860 smapend = (struct bios_smap *)((uintptr_t)smapbase + smapsize); 861 862 for (smap = smapbase; smap < smapend; smap++) 863 if (!add_smap_entry(smap, physmap, physmap_idxp)) 864 break; 865 } 866 867 static void 868 basemem_setup(void) 869 { 870 871 if (basemem > 640) { 872 printf("Preposterous BIOS basemem of %uK, truncating to 640K\n", 873 basemem); 874 basemem = 640; 875 } 876 877 pmap_basemem_setup(basemem); 878 } 879 880 /* 881 * Populate the (physmap) array with base/bound pairs describing the 882 * available physical memory in the system, then test this memory and 883 * build the phys_avail array describing the actually-available memory. 884 * 885 * If we cannot accurately determine the physical memory map, then use 886 * value from the 0xE801 call, and failing that, the RTC. 887 * 888 * Total memory size may be set by the kernel environment variable 889 * hw.physmem or the compile-time define MAXMEM. 890 * 891 * XXX first should be vm_paddr_t. 892 */ 893 static void 894 getmemsize(int first) 895 { 896 int has_smap, off, physmap_idx, pa_indx, da_indx; 897 u_long memtest; 898 vm_paddr_t physmap[PHYS_AVAIL_ENTRIES]; 899 quad_t dcons_addr, dcons_size, physmem_tunable; 900 int hasbrokenint12, i, res __diagused; 901 u_int extmem; 902 struct vm86frame vmf; 903 struct vm86context vmc; 904 vm_paddr_t pa; 905 struct bios_smap *smap, *smapbase; 906 caddr_t kmdp; 907 908 has_smap = 0; 909 bzero(&vmf, sizeof(vmf)); 910 bzero(physmap, sizeof(physmap)); 911 basemem = 0; 912 913 /* 914 * Tell the physical memory allocator about pages used to store 915 * the kernel and preloaded data. See kmem_bootstrap_free(). 916 */ 917 vm_phys_early_add_seg((vm_paddr_t)KERNLOAD, trunc_page(first)); 918 919 TUNABLE_INT_FETCH("hw.above4g_allow", &above4g_allow); 920 TUNABLE_INT_FETCH("hw.above24g_allow", &above24g_allow); 921 922 /* 923 * Check if the loader supplied an SMAP memory map. If so, 924 * use that and do not make any VM86 calls. 925 */ 926 physmap_idx = 0; 927 kmdp = preload_search_by_type("elf kernel"); 928 if (kmdp == NULL) 929 kmdp = preload_search_by_type("elf32 kernel"); 930 smapbase = (struct bios_smap *)preload_search_info(kmdp, 931 MODINFO_METADATA | MODINFOMD_SMAP); 932 if (smapbase != NULL) { 933 add_smap_entries(smapbase, physmap, &physmap_idx); 934 has_smap = 1; 935 goto have_smap; 936 } 937 938 /* 939 * Some newer BIOSes have a broken INT 12H implementation 940 * which causes a kernel panic immediately. In this case, we 941 * need use the SMAP to determine the base memory size. 942 */ 943 hasbrokenint12 = 0; 944 TUNABLE_INT_FETCH("hw.hasbrokenint12", &hasbrokenint12); 945 if (hasbrokenint12 == 0) { 946 /* Use INT12 to determine base memory size. */ 947 vm86_intcall(0x12, &vmf); 948 basemem = vmf.vmf_ax; 949 basemem_setup(); 950 } 951 952 /* 953 * Fetch the memory map with INT 15:E820. Map page 1 R/W into 954 * the kernel page table so we can use it as a buffer. The 955 * kernel will unmap this page later. 956 */ 957 vmc.npages = 0; 958 smap = (void *)vm86_addpage(&vmc, 1, PMAP_MAP_LOW + ptoa(1)); 959 res = vm86_getptr(&vmc, (vm_offset_t)smap, &vmf.vmf_es, &vmf.vmf_di); 960 KASSERT(res != 0, ("vm86_getptr() failed: address not found")); 961 962 vmf.vmf_ebx = 0; 963 do { 964 vmf.vmf_eax = 0xE820; 965 vmf.vmf_edx = SMAP_SIG; 966 vmf.vmf_ecx = sizeof(struct bios_smap); 967 i = vm86_datacall(0x15, &vmf, &vmc); 968 if (i || vmf.vmf_eax != SMAP_SIG) 969 break; 970 has_smap = 1; 971 if (!add_smap_entry(smap, physmap, &physmap_idx)) 972 break; 973 } while (vmf.vmf_ebx != 0); 974 975 have_smap: 976 /* 977 * If we didn't fetch the "base memory" size from INT12, 978 * figure it out from the SMAP (or just guess). 979 */ 980 if (basemem == 0) { 981 for (i = 0; i <= physmap_idx; i += 2) { 982 if (physmap[i] == 0x00000000) { 983 basemem = physmap[i + 1] / 1024; 984 break; 985 } 986 } 987 988 /* XXX: If we couldn't find basemem from SMAP, just guess. */ 989 if (basemem == 0) 990 basemem = 640; 991 basemem_setup(); 992 } 993 994 if (physmap[1] != 0) 995 goto physmap_done; 996 997 /* 998 * If we failed to find an SMAP, figure out the extended 999 * memory size. We will then build a simple memory map with 1000 * two segments, one for "base memory" and the second for 1001 * "extended memory". Note that "extended memory" starts at a 1002 * physical address of 1MB and that both basemem and extmem 1003 * are in units of 1KB. 1004 * 1005 * First, try to fetch the extended memory size via INT 15:E801. 1006 */ 1007 vmf.vmf_ax = 0xE801; 1008 if (vm86_intcall(0x15, &vmf) == 0) { 1009 extmem = vmf.vmf_cx + vmf.vmf_dx * 64; 1010 } else { 1011 /* 1012 * If INT15:E801 fails, this is our last ditch effort 1013 * to determine the extended memory size. Currently 1014 * we prefer the RTC value over INT15:88. 1015 */ 1016 #if 0 1017 vmf.vmf_ah = 0x88; 1018 vm86_intcall(0x15, &vmf); 1019 extmem = vmf.vmf_ax; 1020 #else 1021 extmem = rtcin(RTC_EXTLO) + (rtcin(RTC_EXTHI) << 8); 1022 #endif 1023 } 1024 1025 /* 1026 * Special hack for chipsets that still remap the 384k hole when 1027 * there's 16MB of memory - this really confuses people that 1028 * are trying to use bus mastering ISA controllers with the 1029 * "16MB limit"; they only have 16MB, but the remapping puts 1030 * them beyond the limit. 1031 * 1032 * If extended memory is between 15-16MB (16-17MB phys address range), 1033 * chop it to 15MB. 1034 */ 1035 if ((extmem > 15 * 1024) && (extmem < 16 * 1024)) 1036 extmem = 15 * 1024; 1037 1038 physmap[0] = 0; 1039 physmap[1] = basemem * 1024; 1040 physmap_idx = 2; 1041 physmap[physmap_idx] = 0x100000; 1042 physmap[physmap_idx + 1] = physmap[physmap_idx] + extmem * 1024; 1043 1044 physmap_done: 1045 /* 1046 * Now, physmap contains a map of physical memory. 1047 */ 1048 1049 #ifdef SMP 1050 /* make hole for AP bootstrap code */ 1051 alloc_ap_trampoline(physmap, &physmap_idx); 1052 #endif 1053 1054 /* 1055 * Maxmem isn't the "maximum memory", it's one larger than the 1056 * highest page of the physical address space. It should be 1057 * called something like "Maxphyspage". We may adjust this 1058 * based on ``hw.physmem'' and the results of the memory test. 1059 * 1060 * This is especially confusing when it is much larger than the 1061 * memory size and is displayed as "realmem". 1062 */ 1063 Maxmem = atop(physmap[physmap_idx + 1]); 1064 1065 #ifdef MAXMEM 1066 Maxmem = MAXMEM / 4; 1067 #endif 1068 1069 if (TUNABLE_QUAD_FETCH("hw.physmem", &physmem_tunable)) 1070 Maxmem = atop(physmem_tunable); 1071 1072 /* 1073 * If we have an SMAP, don't allow MAXMEM or hw.physmem to extend 1074 * the amount of memory in the system. 1075 */ 1076 if (has_smap && Maxmem > atop(physmap[physmap_idx + 1])) 1077 Maxmem = atop(physmap[physmap_idx + 1]); 1078 1079 /* 1080 * The boot memory test is disabled by default, as it takes a 1081 * significant amount of time on large-memory systems, and is 1082 * unfriendly to virtual machines as it unnecessarily touches all 1083 * pages. 1084 * 1085 * A general name is used as the code may be extended to support 1086 * additional tests beyond the current "page present" test. 1087 */ 1088 memtest = 0; 1089 TUNABLE_ULONG_FETCH("hw.memtest.tests", &memtest); 1090 1091 if (atop(physmap[physmap_idx + 1]) != Maxmem && 1092 (boothowto & RB_VERBOSE)) 1093 printf("Physical memory use set to %ldK\n", Maxmem * 4); 1094 1095 /* 1096 * If Maxmem has been increased beyond what the system has detected, 1097 * extend the last memory segment to the new limit. 1098 */ 1099 if (atop(physmap[physmap_idx + 1]) < Maxmem) 1100 physmap[physmap_idx + 1] = ptoa((vm_paddr_t)Maxmem); 1101 1102 /* call pmap initialization to make new kernel address space */ 1103 pmap_bootstrap(first); 1104 1105 /* 1106 * Size up each available chunk of physical memory. 1107 */ 1108 physmap[0] = PAGE_SIZE; /* mask off page 0 */ 1109 pa_indx = 0; 1110 da_indx = 1; 1111 phys_avail[pa_indx++] = physmap[0]; 1112 phys_avail[pa_indx] = physmap[0]; 1113 dump_avail[da_indx] = physmap[0]; 1114 1115 /* 1116 * Get dcons buffer address 1117 */ 1118 if (getenv_quad("dcons.addr", &dcons_addr) == 0 || 1119 getenv_quad("dcons.size", &dcons_size) == 0) 1120 dcons_addr = 0; 1121 1122 /* 1123 * physmap is in bytes, so when converting to page boundaries, 1124 * round up the start address and round down the end address. 1125 */ 1126 for (i = 0; i <= physmap_idx; i += 2) { 1127 vm_paddr_t end; 1128 1129 end = ptoa((vm_paddr_t)Maxmem); 1130 if (physmap[i + 1] < end) 1131 end = trunc_page(physmap[i + 1]); 1132 for (pa = round_page(physmap[i]); pa < end; pa += PAGE_SIZE) { 1133 int tmp, page_bad, full; 1134 int *ptr; 1135 1136 full = FALSE; 1137 /* 1138 * block out kernel memory as not available. 1139 */ 1140 if (pa >= KERNLOAD && pa < first) 1141 goto do_dump_avail; 1142 1143 /* 1144 * block out dcons buffer 1145 */ 1146 if (dcons_addr > 0 1147 && pa >= trunc_page(dcons_addr) 1148 && pa < dcons_addr + dcons_size) 1149 goto do_dump_avail; 1150 1151 page_bad = FALSE; 1152 if (memtest == 0) 1153 goto skip_memtest; 1154 1155 /* 1156 * map page into kernel: valid, read/write,non-cacheable 1157 */ 1158 ptr = (int *)pmap_cmap3(pa, PG_V | PG_RW | PG_N); 1159 1160 tmp = *(int *)ptr; 1161 /* 1162 * Test for alternating 1's and 0's 1163 */ 1164 *(volatile int *)ptr = 0xaaaaaaaa; 1165 if (*(volatile int *)ptr != 0xaaaaaaaa) 1166 page_bad = TRUE; 1167 /* 1168 * Test for alternating 0's and 1's 1169 */ 1170 *(volatile int *)ptr = 0x55555555; 1171 if (*(volatile int *)ptr != 0x55555555) 1172 page_bad = TRUE; 1173 /* 1174 * Test for all 1's 1175 */ 1176 *(volatile int *)ptr = 0xffffffff; 1177 if (*(volatile int *)ptr != 0xffffffff) 1178 page_bad = TRUE; 1179 /* 1180 * Test for all 0's 1181 */ 1182 *(volatile int *)ptr = 0x0; 1183 if (*(volatile int *)ptr != 0x0) 1184 page_bad = TRUE; 1185 /* 1186 * Restore original value. 1187 */ 1188 *(int *)ptr = tmp; 1189 1190 skip_memtest: 1191 /* 1192 * Adjust array of valid/good pages. 1193 */ 1194 if (page_bad == TRUE) 1195 continue; 1196 /* 1197 * If this good page is a continuation of the 1198 * previous set of good pages, then just increase 1199 * the end pointer. Otherwise start a new chunk. 1200 * Note that "end" points one higher than end, 1201 * making the range >= start and < end. 1202 * If we're also doing a speculative memory 1203 * test and we at or past the end, bump up Maxmem 1204 * so that we keep going. The first bad page 1205 * will terminate the loop. 1206 */ 1207 if (phys_avail[pa_indx] == pa) { 1208 phys_avail[pa_indx] += PAGE_SIZE; 1209 } else { 1210 pa_indx++; 1211 if (pa_indx == PHYS_AVAIL_ENTRIES) { 1212 printf( 1213 "Too many holes in the physical address space, giving up\n"); 1214 pa_indx--; 1215 full = TRUE; 1216 goto do_dump_avail; 1217 } 1218 phys_avail[pa_indx++] = pa; /* start */ 1219 phys_avail[pa_indx] = pa + PAGE_SIZE; /* end */ 1220 } 1221 physmem++; 1222 do_dump_avail: 1223 if (dump_avail[da_indx] == pa) { 1224 dump_avail[da_indx] += PAGE_SIZE; 1225 } else { 1226 da_indx++; 1227 if (da_indx == PHYS_AVAIL_ENTRIES) { 1228 da_indx--; 1229 goto do_next; 1230 } 1231 dump_avail[da_indx++] = pa; /* start */ 1232 dump_avail[da_indx] = pa + PAGE_SIZE; /* end */ 1233 } 1234 do_next: 1235 if (full) 1236 break; 1237 } 1238 } 1239 pmap_cmap3(0, 0); 1240 1241 /* 1242 * XXX 1243 * The last chunk must contain at least one page plus the message 1244 * buffer to avoid complicating other code (message buffer address 1245 * calculation, etc.). 1246 */ 1247 while (phys_avail[pa_indx - 1] + PAGE_SIZE + 1248 round_page(msgbufsize) >= phys_avail[pa_indx]) { 1249 physmem -= atop(phys_avail[pa_indx] - phys_avail[pa_indx - 1]); 1250 phys_avail[pa_indx--] = 0; 1251 phys_avail[pa_indx--] = 0; 1252 } 1253 1254 Maxmem = atop(phys_avail[pa_indx]); 1255 1256 /* Trim off space for the message buffer. */ 1257 phys_avail[pa_indx] -= round_page(msgbufsize); 1258 1259 /* Map the message buffer. */ 1260 for (off = 0; off < round_page(msgbufsize); off += PAGE_SIZE) 1261 pmap_kenter((vm_offset_t)msgbufp + off, phys_avail[pa_indx] + 1262 off); 1263 } 1264 1265 static void 1266 i386_kdb_init(void) 1267 { 1268 #ifdef DDB 1269 db_fetch_ksymtab(bootinfo.bi_symtab, bootinfo.bi_esymtab, 0); 1270 #endif 1271 kdb_init(); 1272 #ifdef KDB 1273 if (boothowto & RB_KDB) 1274 kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger"); 1275 #endif 1276 } 1277 1278 static void 1279 fixup_idt(void) 1280 { 1281 struct gate_descriptor *ip; 1282 uintptr_t off; 1283 int x; 1284 1285 for (x = 0; x < NIDT; x++) { 1286 ip = &idt[x]; 1287 if (ip->gd_type != SDT_SYS386IGT && 1288 ip->gd_type != SDT_SYS386TGT) 1289 continue; 1290 off = ip->gd_looffset + (((u_int)ip->gd_hioffset) << 16); 1291 KASSERT(off >= (uintptr_t)start_exceptions && 1292 off < (uintptr_t)end_exceptions, 1293 ("IDT[%d] type %d off %#x", x, ip->gd_type, off)); 1294 off += setidt_disp; 1295 MPASS(off >= PMAP_TRM_MIN_ADDRESS && 1296 off < PMAP_TRM_MAX_ADDRESS); 1297 ip->gd_looffset = off; 1298 ip->gd_hioffset = off >> 16; 1299 } 1300 } 1301 1302 static void 1303 i386_setidt1(void) 1304 { 1305 int x; 1306 1307 /* exceptions */ 1308 for (x = 0; x < NIDT; x++) 1309 setidt(x, &IDTVEC(rsvd), SDT_SYS386IGT, SEL_KPL, 1310 GSEL(GCODE_SEL, SEL_KPL)); 1311 setidt(IDT_DE, &IDTVEC(div), SDT_SYS386IGT, SEL_KPL, 1312 GSEL(GCODE_SEL, SEL_KPL)); 1313 setidt(IDT_DB, &IDTVEC(dbg), SDT_SYS386IGT, SEL_KPL, 1314 GSEL(GCODE_SEL, SEL_KPL)); 1315 setidt(IDT_NMI, &IDTVEC(nmi), SDT_SYS386IGT, SEL_KPL, 1316 GSEL(GCODE_SEL, SEL_KPL)); 1317 setidt(IDT_BP, &IDTVEC(bpt), SDT_SYS386IGT, SEL_UPL, 1318 GSEL(GCODE_SEL, SEL_KPL)); 1319 setidt(IDT_OF, &IDTVEC(ofl), SDT_SYS386IGT, SEL_UPL, 1320 GSEL(GCODE_SEL, SEL_KPL)); 1321 setidt(IDT_BR, &IDTVEC(bnd), SDT_SYS386IGT, SEL_KPL, 1322 GSEL(GCODE_SEL, SEL_KPL)); 1323 setidt(IDT_UD, &IDTVEC(ill), SDT_SYS386IGT, SEL_KPL, 1324 GSEL(GCODE_SEL, SEL_KPL)); 1325 setidt(IDT_NM, &IDTVEC(dna), SDT_SYS386IGT, SEL_KPL, 1326 GSEL(GCODE_SEL, SEL_KPL)); 1327 setidt(IDT_DF, 0, SDT_SYSTASKGT, SEL_KPL, GSEL(GPANIC_SEL, 1328 SEL_KPL)); 1329 setidt(IDT_FPUGP, &IDTVEC(fpusegm), SDT_SYS386IGT, 1330 SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); 1331 setidt(IDT_TS, &IDTVEC(tss), SDT_SYS386IGT, SEL_KPL, 1332 GSEL(GCODE_SEL, SEL_KPL)); 1333 setidt(IDT_NP, &IDTVEC(missing), SDT_SYS386IGT, SEL_KPL, 1334 GSEL(GCODE_SEL, SEL_KPL)); 1335 setidt(IDT_SS, &IDTVEC(stk), SDT_SYS386IGT, SEL_KPL, 1336 GSEL(GCODE_SEL, SEL_KPL)); 1337 setidt(IDT_GP, &IDTVEC(prot), SDT_SYS386IGT, SEL_KPL, 1338 GSEL(GCODE_SEL, SEL_KPL)); 1339 setidt(IDT_PF, &IDTVEC(page), SDT_SYS386IGT, SEL_KPL, 1340 GSEL(GCODE_SEL, SEL_KPL)); 1341 setidt(IDT_MF, &IDTVEC(fpu), SDT_SYS386IGT, SEL_KPL, 1342 GSEL(GCODE_SEL, SEL_KPL)); 1343 setidt(IDT_AC, &IDTVEC(align), SDT_SYS386IGT, SEL_KPL, 1344 GSEL(GCODE_SEL, SEL_KPL)); 1345 setidt(IDT_MC, &IDTVEC(mchk), SDT_SYS386IGT, SEL_KPL, 1346 GSEL(GCODE_SEL, SEL_KPL)); 1347 setidt(IDT_XF, &IDTVEC(xmm), SDT_SYS386IGT, SEL_KPL, 1348 GSEL(GCODE_SEL, SEL_KPL)); 1349 setidt(IDT_SYSCALL, &IDTVEC(int0x80_syscall), 1350 SDT_SYS386IGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL)); 1351 #ifdef KDTRACE_HOOKS 1352 setidt(IDT_DTRACE_RET, &IDTVEC(dtrace_ret), 1353 SDT_SYS386IGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL)); 1354 #endif 1355 #ifdef XENHVM 1356 setidt(IDT_EVTCHN, &IDTVEC(xen_intr_upcall), 1357 SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); 1358 #endif 1359 } 1360 1361 static void 1362 i386_setidt2(void) 1363 { 1364 1365 setidt(IDT_UD, &IDTVEC(ill), SDT_SYS386IGT, SEL_KPL, 1366 GSEL(GCODE_SEL, SEL_KPL)); 1367 setidt(IDT_GP, &IDTVEC(prot), SDT_SYS386IGT, SEL_KPL, 1368 GSEL(GCODE_SEL, SEL_KPL)); 1369 } 1370 1371 #if defined(DEV_ISA) && !defined(DEV_ATPIC) 1372 static void 1373 i386_setidt3(void) 1374 { 1375 1376 setidt(IDT_IO_INTS + 7, IDTVEC(spuriousint), 1377 SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); 1378 setidt(IDT_IO_INTS + 15, IDTVEC(spuriousint), 1379 SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); 1380 } 1381 #endif 1382 1383 register_t 1384 init386(int first) 1385 { 1386 struct region_descriptor r_gdt, r_idt; /* table descriptors */ 1387 int gsel_tss, metadata_missing, x, pa; 1388 struct pcpu *pc; 1389 struct xstate_hdr *xhdr; 1390 caddr_t kmdp; 1391 vm_offset_t addend; 1392 size_t ucode_len; 1393 1394 thread0.td_kstack = proc0kstack; 1395 thread0.td_kstack_pages = TD0_KSTACK_PAGES; 1396 1397 /* 1398 * This may be done better later if it gets more high level 1399 * components in it. If so just link td->td_proc here. 1400 */ 1401 proc_linkup0(&proc0, &thread0); 1402 1403 if (bootinfo.bi_modulep) { 1404 metadata_missing = 0; 1405 addend = (vm_paddr_t)bootinfo.bi_modulep < KERNBASE ? 1406 PMAP_MAP_LOW : 0; 1407 preload_metadata = (caddr_t)bootinfo.bi_modulep + addend; 1408 preload_bootstrap_relocate(addend); 1409 } else { 1410 metadata_missing = 1; 1411 } 1412 1413 if (bootinfo.bi_envp != 0) { 1414 addend = (vm_paddr_t)bootinfo.bi_envp < KERNBASE ? 1415 PMAP_MAP_LOW : 0; 1416 init_static_kenv((char *)bootinfo.bi_envp + addend, 0); 1417 } else { 1418 init_static_kenv(NULL, 0); 1419 } 1420 1421 /* 1422 * Re-evaluate CPU features if we loaded a microcode update. 1423 */ 1424 ucode_len = ucode_load_bsp(first); 1425 if (ucode_len != 0) { 1426 identify_cpu(); 1427 first = roundup2(first + ucode_len, PAGE_SIZE); 1428 } 1429 1430 identify_hypervisor(); 1431 identify_hypervisor_smbios(); 1432 1433 /* Init basic tunables, hz etc */ 1434 init_param1(); 1435 1436 /* Set bootmethod to BIOS: it's the only supported on i386. */ 1437 strlcpy(bootmethod, "BIOS", sizeof(bootmethod)); 1438 1439 /* 1440 * Make gdt memory segments. All segments cover the full 4GB 1441 * of address space and permissions are enforced at page level. 1442 */ 1443 gdt_segs[GCODE_SEL].ssd_limit = atop(0 - 1); 1444 gdt_segs[GDATA_SEL].ssd_limit = atop(0 - 1); 1445 gdt_segs[GUCODE_SEL].ssd_limit = atop(0 - 1); 1446 gdt_segs[GUDATA_SEL].ssd_limit = atop(0 - 1); 1447 gdt_segs[GUFS_SEL].ssd_limit = atop(0 - 1); 1448 gdt_segs[GUGS_SEL].ssd_limit = atop(0 - 1); 1449 1450 pc = &__pcpu[0]; 1451 gdt_segs[GPRIV_SEL].ssd_limit = atop(0 - 1); 1452 gdt_segs[GPRIV_SEL].ssd_base = (int)pc; 1453 gdt_segs[GPROC0_SEL].ssd_base = (int)&common_tss0; 1454 1455 for (x = 0; x < NGDT; x++) 1456 ssdtosd(&gdt_segs[x], &gdt0[x].sd); 1457 1458 r_gdt.rd_limit = NGDT * sizeof(gdt0[0]) - 1; 1459 r_gdt.rd_base = (int)gdt0; 1460 mtx_init(&dt_lock, "descriptor tables", NULL, MTX_SPIN); 1461 lgdt(&r_gdt); 1462 1463 pcpu_init(pc, 0, sizeof(struct pcpu)); 1464 for (pa = first; pa < first + DPCPU_SIZE; pa += PAGE_SIZE) 1465 pmap_kenter(pa, pa); 1466 dpcpu_init((void *)first, 0); 1467 first += DPCPU_SIZE; 1468 PCPU_SET(prvspace, pc); 1469 PCPU_SET(curthread, &thread0); 1470 /* Non-late cninit() and printf() can be moved up to here. */ 1471 1472 /* 1473 * Initialize mutexes. 1474 * 1475 * icu_lock: in order to allow an interrupt to occur in a critical 1476 * section, to set pcpu->ipending (etc...) properly, we 1477 * must be able to get the icu lock, so it can't be 1478 * under witness. 1479 */ 1480 mutex_init(); 1481 mtx_init(&icu_lock, "icu", NULL, MTX_SPIN | MTX_NOWITNESS | MTX_NOPROFILE); 1482 1483 i386_setidt1(); 1484 1485 r_idt.rd_limit = sizeof(idt0) - 1; 1486 r_idt.rd_base = (int) idt; 1487 lidt(&r_idt); 1488 1489 finishidentcpu(); /* Final stage of CPU initialization */ 1490 1491 /* 1492 * Initialize the clock before the console so that console 1493 * initialization can use DELAY(). 1494 */ 1495 clock_init(); 1496 1497 i386_setidt2(); 1498 pmap_set_nx(); 1499 initializecpu(); /* Initialize CPU registers */ 1500 initializecpucache(); 1501 1502 /* pointer to selector slot for %fs/%gs */ 1503 PCPU_SET(fsgs_gdt, &gdt[GUFS_SEL].sd); 1504 1505 /* Initialize the tss (except for the final esp0) early for vm86. */ 1506 common_tss0.tss_esp0 = thread0.td_kstack + thread0.td_kstack_pages * 1507 PAGE_SIZE - VM86_STACK_SPACE; 1508 common_tss0.tss_ss0 = GSEL(GDATA_SEL, SEL_KPL); 1509 common_tss0.tss_ioopt = sizeof(struct i386tss) << 16; 1510 gsel_tss = GSEL(GPROC0_SEL, SEL_KPL); 1511 PCPU_SET(tss_gdt, &gdt[GPROC0_SEL].sd); 1512 PCPU_SET(common_tssd, *PCPU_GET(tss_gdt)); 1513 ltr(gsel_tss); 1514 1515 /* Initialize the PIC early for vm86 calls. */ 1516 #ifdef DEV_ISA 1517 #ifdef DEV_ATPIC 1518 elcr_probe(); 1519 atpic_startup(); 1520 #else 1521 /* Reset and mask the atpics and leave them shut down. */ 1522 atpic_reset(); 1523 1524 /* 1525 * Point the ICU spurious interrupt vectors at the APIC spurious 1526 * interrupt handler. 1527 */ 1528 i386_setidt3(); 1529 #endif 1530 #endif 1531 1532 /* 1533 * The console and kdb should be initialized even earlier than here, 1534 * but some console drivers don't work until after getmemsize(). 1535 * Default to late console initialization to support these drivers. 1536 * This loses mainly printf()s in getmemsize() and early debugging. 1537 */ 1538 TUNABLE_INT_FETCH("debug.late_console", &late_console); 1539 if (!late_console) { 1540 cninit(); 1541 i386_kdb_init(); 1542 } 1543 1544 if (cpu_fxsr && (cpu_feature2 & CPUID2_XSAVE) != 0) { 1545 use_xsave = 1; 1546 TUNABLE_INT_FETCH("hw.use_xsave", &use_xsave); 1547 } 1548 1549 kmdp = preload_search_by_type("elf kernel"); 1550 link_elf_ireloc(kmdp); 1551 1552 vm86_initialize(); 1553 getmemsize(first); 1554 init_param2(physmem); 1555 1556 /* now running on new page tables, configured,and u/iom is accessible */ 1557 1558 if (late_console) 1559 cninit(); 1560 1561 if (metadata_missing) 1562 printf("WARNING: loader(8) metadata is missing!\n"); 1563 1564 if (late_console) 1565 i386_kdb_init(); 1566 1567 msgbufinit(msgbufp, msgbufsize); 1568 npxinit(true); 1569 1570 /* 1571 * Set up thread0 pcb after npxinit calculated pcb + fpu save 1572 * area size. Zero out the extended state header in fpu save 1573 * area. 1574 */ 1575 thread0.td_pcb = get_pcb_td(&thread0); 1576 thread0.td_pcb->pcb_save = get_pcb_user_save_td(&thread0); 1577 bzero(get_pcb_user_save_td(&thread0), cpu_max_ext_state_size); 1578 if (use_xsave) { 1579 xhdr = (struct xstate_hdr *)(get_pcb_user_save_td(&thread0) + 1580 1); 1581 xhdr->xstate_bv = xsave_mask; 1582 } 1583 PCPU_SET(curpcb, thread0.td_pcb); 1584 /* Move esp0 in the tss to its final place. */ 1585 /* Note: -16 is so we can grow the trapframe if we came from vm86 */ 1586 common_tss0.tss_esp0 = (vm_offset_t)thread0.td_pcb - VM86_STACK_SPACE; 1587 PCPU_SET(kesp0, common_tss0.tss_esp0); 1588 gdt[GPROC0_SEL].sd.sd_type = SDT_SYS386TSS; /* clear busy bit */ 1589 ltr(gsel_tss); 1590 1591 /* transfer to user mode */ 1592 1593 _ucodesel = GSEL(GUCODE_SEL, SEL_UPL); 1594 _udatasel = GSEL(GUDATA_SEL, SEL_UPL); 1595 1596 /* setup proc 0's pcb */ 1597 thread0.td_pcb->pcb_flags = 0; 1598 thread0.td_pcb->pcb_cr3 = pmap_get_kcr3(); 1599 thread0.td_pcb->pcb_ext = 0; 1600 thread0.td_frame = &proc0_tf; 1601 1602 #ifdef FDT 1603 x86_init_fdt(); 1604 #endif 1605 1606 /* Location of kernel stack for locore */ 1607 return ((register_t)thread0.td_pcb); 1608 } 1609 1610 static void 1611 machdep_init_trampoline(void) 1612 { 1613 struct region_descriptor r_gdt, r_idt; 1614 struct i386tss *tss; 1615 char *copyout_buf, *trampoline, *tramp_stack_base; 1616 int x; 1617 1618 gdt = pmap_trm_alloc(sizeof(union descriptor) * NGDT * mp_ncpus, 1619 M_NOWAIT | M_ZERO); 1620 bcopy(gdt0, gdt, sizeof(union descriptor) * NGDT); 1621 r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1; 1622 r_gdt.rd_base = (int)gdt; 1623 lgdt(&r_gdt); 1624 1625 tss = pmap_trm_alloc(sizeof(struct i386tss) * mp_ncpus, 1626 M_NOWAIT | M_ZERO); 1627 bcopy(&common_tss0, tss, sizeof(struct i386tss)); 1628 gdt[GPROC0_SEL].sd.sd_lobase = (int)tss; 1629 gdt[GPROC0_SEL].sd.sd_hibase = (u_int)tss >> 24; 1630 gdt[GPROC0_SEL].sd.sd_type = SDT_SYS386TSS; 1631 1632 PCPU_SET(fsgs_gdt, &gdt[GUFS_SEL].sd); 1633 PCPU_SET(tss_gdt, &gdt[GPROC0_SEL].sd); 1634 PCPU_SET(common_tssd, *PCPU_GET(tss_gdt)); 1635 PCPU_SET(common_tssp, tss); 1636 ltr(GSEL(GPROC0_SEL, SEL_KPL)); 1637 1638 trampoline = pmap_trm_alloc(end_exceptions - start_exceptions, 1639 M_NOWAIT); 1640 bcopy(start_exceptions, trampoline, end_exceptions - start_exceptions); 1641 tramp_stack_base = pmap_trm_alloc(TRAMP_STACK_SZ, M_NOWAIT); 1642 PCPU_SET(trampstk, (uintptr_t)tramp_stack_base + TRAMP_STACK_SZ - 1643 VM86_STACK_SPACE); 1644 tss[0].tss_esp0 = PCPU_GET(trampstk); 1645 1646 idt = pmap_trm_alloc(sizeof(idt0), M_NOWAIT | M_ZERO); 1647 bcopy(idt0, idt, sizeof(idt0)); 1648 1649 /* Re-initialize new IDT since the handlers were relocated */ 1650 setidt_disp = trampoline - start_exceptions; 1651 if (bootverbose) 1652 printf("Trampoline disposition %#zx\n", setidt_disp); 1653 fixup_idt(); 1654 1655 r_idt.rd_limit = sizeof(struct gate_descriptor) * NIDT - 1; 1656 r_idt.rd_base = (int)idt; 1657 lidt(&r_idt); 1658 1659 /* dblfault TSS */ 1660 dblfault_tss = pmap_trm_alloc(sizeof(struct i386tss), M_NOWAIT | M_ZERO); 1661 dblfault_stack = pmap_trm_alloc(PAGE_SIZE, M_NOWAIT); 1662 dblfault_tss->tss_esp = dblfault_tss->tss_esp0 = 1663 dblfault_tss->tss_esp1 = dblfault_tss->tss_esp2 = 1664 (int)dblfault_stack + PAGE_SIZE; 1665 dblfault_tss->tss_ss = dblfault_tss->tss_ss0 = dblfault_tss->tss_ss1 = 1666 dblfault_tss->tss_ss2 = GSEL(GDATA_SEL, SEL_KPL); 1667 dblfault_tss->tss_cr3 = pmap_get_kcr3(); 1668 dblfault_tss->tss_eip = (int)dblfault_handler; 1669 dblfault_tss->tss_eflags = PSL_KERNEL; 1670 dblfault_tss->tss_ds = dblfault_tss->tss_es = 1671 dblfault_tss->tss_gs = GSEL(GDATA_SEL, SEL_KPL); 1672 dblfault_tss->tss_fs = GSEL(GPRIV_SEL, SEL_KPL); 1673 dblfault_tss->tss_cs = GSEL(GCODE_SEL, SEL_KPL); 1674 dblfault_tss->tss_ldt = GSEL(GLDT_SEL, SEL_KPL); 1675 gdt[GPANIC_SEL].sd.sd_lobase = (int)dblfault_tss; 1676 gdt[GPANIC_SEL].sd.sd_hibase = (u_int)dblfault_tss >> 24; 1677 1678 /* make ldt memory segments */ 1679 ldt = pmap_trm_alloc(sizeof(union descriptor) * NLDT, 1680 M_NOWAIT | M_ZERO); 1681 gdt[GLDT_SEL].sd.sd_lobase = (int)ldt; 1682 gdt[GLDT_SEL].sd.sd_hibase = (u_int)ldt >> 24; 1683 ldt_segs[LUCODE_SEL].ssd_limit = atop(0 - 1); 1684 ldt_segs[LUDATA_SEL].ssd_limit = atop(0 - 1); 1685 for (x = 0; x < nitems(ldt_segs); x++) 1686 ssdtosd(&ldt_segs[x], &ldt[x].sd); 1687 1688 _default_ldt = GSEL(GLDT_SEL, SEL_KPL); 1689 lldt(_default_ldt); 1690 PCPU_SET(currentldt, _default_ldt); 1691 1692 copyout_buf = pmap_trm_alloc(TRAMP_COPYOUT_SZ, M_NOWAIT); 1693 PCPU_SET(copyout_buf, copyout_buf); 1694 copyout_init_tramp(); 1695 } 1696 SYSINIT(vm_mem, SI_SUB_VM, SI_ORDER_SECOND, machdep_init_trampoline, NULL); 1697 1698 #ifdef COMPAT_43 1699 static void 1700 i386_setup_lcall_gate(void) 1701 { 1702 struct sysentvec *sv; 1703 struct user_segment_descriptor desc; 1704 u_int lcall_addr; 1705 1706 sv = &elf32_freebsd_sysvec; 1707 lcall_addr = (uintptr_t)sv->sv_psstrings - sz_lcall_tramp; 1708 1709 bzero(&desc, sizeof(desc)); 1710 desc.sd_type = SDT_MEMERA; 1711 desc.sd_dpl = SEL_UPL; 1712 desc.sd_p = 1; 1713 desc.sd_def32 = 1; 1714 desc.sd_gran = 1; 1715 desc.sd_lolimit = 0xffff; 1716 desc.sd_hilimit = 0xf; 1717 desc.sd_lobase = lcall_addr; 1718 desc.sd_hibase = lcall_addr >> 24; 1719 bcopy(&desc, &ldt[LSYS5CALLS_SEL], sizeof(desc)); 1720 } 1721 SYSINIT(elf32, SI_SUB_EXEC, SI_ORDER_ANY, i386_setup_lcall_gate, NULL); 1722 #endif 1723 1724 void 1725 cpu_pcpu_init(struct pcpu *pcpu, int cpuid, size_t size) 1726 { 1727 1728 pcpu->pc_acpi_id = 0xffffffff; 1729 } 1730 1731 static int 1732 smap_sysctl_handler(SYSCTL_HANDLER_ARGS) 1733 { 1734 struct bios_smap *smapbase; 1735 struct bios_smap_xattr smap; 1736 caddr_t kmdp; 1737 uint32_t *smapattr; 1738 int count, error, i; 1739 1740 /* Retrieve the system memory map from the loader. */ 1741 kmdp = preload_search_by_type("elf kernel"); 1742 if (kmdp == NULL) 1743 kmdp = preload_search_by_type("elf32 kernel"); 1744 smapbase = (struct bios_smap *)preload_search_info(kmdp, 1745 MODINFO_METADATA | MODINFOMD_SMAP); 1746 if (smapbase == NULL) 1747 return (0); 1748 smapattr = (uint32_t *)preload_search_info(kmdp, 1749 MODINFO_METADATA | MODINFOMD_SMAP_XATTR); 1750 count = *((u_int32_t *)smapbase - 1) / sizeof(*smapbase); 1751 error = 0; 1752 for (i = 0; i < count; i++) { 1753 smap.base = smapbase[i].base; 1754 smap.length = smapbase[i].length; 1755 smap.type = smapbase[i].type; 1756 if (smapattr != NULL) 1757 smap.xattr = smapattr[i]; 1758 else 1759 smap.xattr = 0; 1760 error = SYSCTL_OUT(req, &smap, sizeof(smap)); 1761 } 1762 return (error); 1763 } 1764 SYSCTL_PROC(_machdep, OID_AUTO, smap, 1765 CTLTYPE_OPAQUE | CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, 0, 1766 smap_sysctl_handler, "S,bios_smap_xattr", 1767 "Raw BIOS SMAP data"); 1768 1769 void 1770 spinlock_enter(void) 1771 { 1772 struct thread *td; 1773 register_t flags; 1774 1775 td = curthread; 1776 if (td->td_md.md_spinlock_count == 0) { 1777 flags = intr_disable(); 1778 td->td_md.md_spinlock_count = 1; 1779 td->td_md.md_saved_flags = flags; 1780 critical_enter(); 1781 } else 1782 td->td_md.md_spinlock_count++; 1783 } 1784 1785 void 1786 spinlock_exit(void) 1787 { 1788 struct thread *td; 1789 register_t flags; 1790 1791 td = curthread; 1792 flags = td->td_md.md_saved_flags; 1793 td->td_md.md_spinlock_count--; 1794 if (td->td_md.md_spinlock_count == 0) { 1795 critical_exit(); 1796 intr_restore(flags); 1797 } 1798 } 1799 1800 #if defined(I586_CPU) && !defined(NO_F00F_HACK) 1801 static void f00f_hack(void *unused); 1802 SYSINIT(f00f_hack, SI_SUB_INTRINSIC, SI_ORDER_FIRST, f00f_hack, NULL); 1803 1804 static void 1805 f00f_hack(void *unused) 1806 { 1807 struct region_descriptor r_idt; 1808 struct gate_descriptor *new_idt; 1809 vm_offset_t tmp; 1810 1811 if (!has_f00f_bug) 1812 return; 1813 1814 printf("Intel Pentium detected, installing workaround for F00F bug\n"); 1815 1816 tmp = (vm_offset_t)pmap_trm_alloc(PAGE_SIZE * 3, M_NOWAIT | M_ZERO); 1817 if (tmp == 0) 1818 panic("kmem_malloc returned 0"); 1819 tmp = round_page(tmp); 1820 1821 /* Put the problematic entry (#6) at the end of the lower page. */ 1822 new_idt = (struct gate_descriptor *) 1823 (tmp + PAGE_SIZE - 7 * sizeof(struct gate_descriptor)); 1824 bcopy(idt, new_idt, sizeof(idt0)); 1825 r_idt.rd_base = (u_int)new_idt; 1826 r_idt.rd_limit = sizeof(idt0) - 1; 1827 lidt(&r_idt); 1828 /* SMP machines do not need the F00F hack. */ 1829 idt = new_idt; 1830 pmap_protect(kernel_pmap, tmp, tmp + PAGE_SIZE, VM_PROT_READ); 1831 } 1832 #endif /* defined(I586_CPU) && !NO_F00F_HACK */ 1833 1834 /* 1835 * Construct a PCB from a trapframe. This is called from kdb_trap() where 1836 * we want to start a backtrace from the function that caused us to enter 1837 * the debugger. We have the context in the trapframe, but base the trace 1838 * on the PCB. The PCB doesn't have to be perfect, as long as it contains 1839 * enough for a backtrace. 1840 */ 1841 void 1842 makectx(struct trapframe *tf, struct pcb *pcb) 1843 { 1844 1845 pcb->pcb_edi = tf->tf_edi; 1846 pcb->pcb_esi = tf->tf_esi; 1847 pcb->pcb_ebp = tf->tf_ebp; 1848 pcb->pcb_ebx = tf->tf_ebx; 1849 pcb->pcb_eip = tf->tf_eip; 1850 pcb->pcb_esp = (ISPL(tf->tf_cs)) ? tf->tf_esp : (int)(tf + 1) - 8; 1851 pcb->pcb_gs = rgs(); 1852 } 1853 1854 #ifdef KDB 1855 1856 /* 1857 * Provide inb() and outb() as functions. They are normally only available as 1858 * inline functions, thus cannot be called from the debugger. 1859 */ 1860 1861 /* silence compiler warnings */ 1862 u_char inb_(u_short); 1863 void outb_(u_short, u_char); 1864 1865 u_char 1866 inb_(u_short port) 1867 { 1868 return inb(port); 1869 } 1870 1871 void 1872 outb_(u_short port, u_char data) 1873 { 1874 outb(port, data); 1875 } 1876 1877 #endif /* KDB */ 1878