1 /*- 2 * Copyright (c) 2017 Adrian Chadd <adrian@FreeBSD.org> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 15 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 16 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 17 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 18 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 19 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 20 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 21 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 22 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 23 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 24 */ 25 26 #include <sys/cdefs.h> 27 #ifdef __FreeBSD__ 28 #endif 29 30 /* 31 * IEEE 802.11ac-2013 protocol support. 32 */ 33 34 #include "opt_inet.h" 35 #include "opt_wlan.h" 36 37 #include <sys/param.h> 38 #include <sys/kernel.h> 39 #include <sys/malloc.h> 40 #include <sys/systm.h> 41 #include <sys/endian.h> 42 43 #include <sys/socket.h> 44 45 #include <net/if.h> 46 #include <net/if_var.h> 47 #include <net/if_media.h> 48 #include <net/ethernet.h> 49 50 #include <net80211/ieee80211_var.h> 51 #include <net80211/ieee80211_action.h> 52 #include <net80211/ieee80211_input.h> 53 #include <net80211/ieee80211_vht.h> 54 55 #define ADDSHORT(frm, v) do { \ 56 frm[0] = (v) & 0xff; \ 57 frm[1] = (v) >> 8; \ 58 frm += 2; \ 59 } while (0) 60 #define ADDWORD(frm, v) do { \ 61 frm[0] = (v) & 0xff; \ 62 frm[1] = ((v) >> 8) & 0xff; \ 63 frm[2] = ((v) >> 16) & 0xff; \ 64 frm[3] = ((v) >> 24) & 0xff; \ 65 frm += 4; \ 66 } while (0) 67 68 /* 69 * Immediate TODO: 70 * 71 * + handle WLAN_ACTION_VHT_OPMODE_NOTIF and other VHT action frames 72 * + ensure vhtinfo/vhtcap parameters correctly use the negotiated 73 * capabilities and ratesets 74 * + group ID management operation 75 */ 76 77 /* 78 * XXX TODO: handle WLAN_ACTION_VHT_OPMODE_NOTIF 79 * 80 * Look at mac80211/vht.c:ieee80211_vht_handle_opmode() for further details. 81 */ 82 83 static int 84 vht_recv_action_placeholder(struct ieee80211_node *ni, 85 const struct ieee80211_frame *wh, 86 const uint8_t *frm, const uint8_t *efrm) 87 { 88 89 #ifdef IEEE80211_DEBUG 90 ieee80211_note(ni->ni_vap, "%s: called; fc=0x%.2x/0x%.2x", 91 __func__, wh->i_fc[0], wh->i_fc[1]); 92 #endif 93 return (0); 94 } 95 96 static int 97 vht_send_action_placeholder(struct ieee80211_node *ni, 98 int category, int action, void *arg0) 99 { 100 101 #ifdef IEEE80211_DEBUG 102 ieee80211_note(ni->ni_vap, "%s: called; category=%d, action=%d", 103 __func__, category, action); 104 #endif 105 return (EINVAL); 106 } 107 108 static void 109 ieee80211_vht_init(void) 110 { 111 112 ieee80211_recv_action_register(IEEE80211_ACTION_CAT_VHT, 113 WLAN_ACTION_VHT_COMPRESSED_BF, vht_recv_action_placeholder); 114 ieee80211_recv_action_register(IEEE80211_ACTION_CAT_VHT, 115 WLAN_ACTION_VHT_GROUPID_MGMT, vht_recv_action_placeholder); 116 ieee80211_recv_action_register(IEEE80211_ACTION_CAT_VHT, 117 WLAN_ACTION_VHT_OPMODE_NOTIF, vht_recv_action_placeholder); 118 119 ieee80211_send_action_register(IEEE80211_ACTION_CAT_VHT, 120 WLAN_ACTION_VHT_COMPRESSED_BF, vht_send_action_placeholder); 121 ieee80211_send_action_register(IEEE80211_ACTION_CAT_VHT, 122 WLAN_ACTION_VHT_GROUPID_MGMT, vht_send_action_placeholder); 123 ieee80211_send_action_register(IEEE80211_ACTION_CAT_VHT, 124 WLAN_ACTION_VHT_OPMODE_NOTIF, vht_send_action_placeholder); 125 } 126 127 SYSINIT(wlan_vht, SI_SUB_DRIVERS, SI_ORDER_FIRST, ieee80211_vht_init, NULL); 128 129 void 130 ieee80211_vht_attach(struct ieee80211com *ic) 131 { 132 } 133 134 void 135 ieee80211_vht_detach(struct ieee80211com *ic) 136 { 137 } 138 139 void 140 ieee80211_vht_vattach(struct ieee80211vap *vap) 141 { 142 struct ieee80211com *ic = vap->iv_ic; 143 144 if (! IEEE80211_CONF_VHT(ic)) 145 return; 146 147 vap->iv_vhtcaps = ic->ic_vhtcaps; 148 vap->iv_vhtextcaps = ic->ic_vhtextcaps; 149 150 /* XXX assume VHT80 support; should really check vhtcaps */ 151 vap->iv_flags_vht = 152 IEEE80211_FVHT_VHT 153 | IEEE80211_FVHT_USEVHT40 154 | IEEE80211_FVHT_USEVHT80; 155 if (IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_IS_160MHZ(vap->iv_vhtcaps)) 156 vap->iv_flags_vht |= IEEE80211_FVHT_USEVHT160; 157 if (IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_IS_160_80P80MHZ(vap->iv_vhtcaps)) 158 vap->iv_flags_vht |= IEEE80211_FVHT_USEVHT80P80; 159 160 memcpy(&vap->iv_vht_mcsinfo, &ic->ic_vht_mcsinfo, 161 sizeof(struct ieee80211_vht_mcs_info)); 162 } 163 164 void 165 ieee80211_vht_vdetach(struct ieee80211vap *vap) 166 { 167 } 168 169 #if 0 170 static void 171 vht_announce(struct ieee80211com *ic, enum ieee80211_phymode mode) 172 { 173 } 174 #endif 175 176 static int 177 vht_mcs_to_num(int m) 178 { 179 180 switch (m) { 181 case IEEE80211_VHT_MCS_SUPPORT_0_7: 182 return (7); 183 case IEEE80211_VHT_MCS_SUPPORT_0_8: 184 return (8); 185 case IEEE80211_VHT_MCS_SUPPORT_0_9: 186 return (9); 187 default: 188 return (0); 189 } 190 } 191 192 void 193 ieee80211_vht_announce(struct ieee80211com *ic) 194 { 195 int i, tx, rx; 196 197 if (! IEEE80211_CONF_VHT(ic)) 198 return; 199 200 /* Channel width */ 201 ic_printf(ic, "[VHT] Channel Widths: 20MHz, 40MHz, 80MHz%s%s\n", 202 (IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_IS_160MHZ(ic->ic_vhtcaps)) ? 203 ", 160MHz" : "", 204 (IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_IS_160_80P80MHZ(ic->ic_vhtcaps)) ? 205 ", 80+80MHz" : ""); 206 /* Features */ 207 ic_printf(ic, "[VHT] Features: %b\n", ic->ic_vhtcaps, 208 IEEE80211_VHTCAP_BITS); 209 210 /* For now, just 5GHz VHT. Worry about 2GHz VHT later */ 211 for (i = 0; i < 8; i++) { 212 /* Each stream is 2 bits */ 213 tx = (ic->ic_vht_mcsinfo.tx_mcs_map >> (2*i)) & 0x3; 214 rx = (ic->ic_vht_mcsinfo.rx_mcs_map >> (2*i)) & 0x3; 215 if (tx == 3 && rx == 3) 216 continue; 217 ic_printf(ic, "[VHT] NSS %d: TX MCS 0..%d, RX MCS 0..%d\n", 218 i + 1, vht_mcs_to_num(tx), vht_mcs_to_num(rx)); 219 } 220 } 221 222 void 223 ieee80211_vht_node_init(struct ieee80211_node *ni) 224 { 225 226 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, 227 "%s: called", __func__); 228 ni->ni_flags |= IEEE80211_NODE_VHT; 229 } 230 231 void 232 ieee80211_vht_node_cleanup(struct ieee80211_node *ni) 233 { 234 235 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, 236 "%s: called", __func__); 237 ni->ni_flags &= ~IEEE80211_NODE_VHT; 238 ni->ni_vhtcap = 0; 239 bzero(&ni->ni_vht_mcsinfo, sizeof(struct ieee80211_vht_mcs_info)); 240 } 241 242 /* 243 * Parse an 802.11ac VHT operation IE. 244 */ 245 void 246 ieee80211_parse_vhtopmode(struct ieee80211_node *ni, const uint8_t *ie) 247 { 248 /* vht operation */ 249 ni->ni_vht_chanwidth = ie[2]; 250 ni->ni_vht_chan1 = ie[3]; 251 ni->ni_vht_chan2 = ie[4]; 252 ni->ni_vht_basicmcs = le16dec(ie + 5); 253 254 #if 0 255 printf("%s: chan1=%d, chan2=%d, chanwidth=%d, basicmcs=0x%04x\n", 256 __func__, ni->ni_vht_chan1, ni->ni_vht_chan2, ni->ni_vht_chanwidth, 257 ni->ni_vht_basicmcs); 258 #endif 259 } 260 261 /* 262 * Parse an 802.11ac VHT capability IE. 263 */ 264 void 265 ieee80211_parse_vhtcap(struct ieee80211_node *ni, const uint8_t *ie) 266 { 267 268 /* vht capability */ 269 ni->ni_vhtcap = le32dec(ie + 2); 270 271 /* suppmcs */ 272 ni->ni_vht_mcsinfo.rx_mcs_map = le16dec(ie + 6); 273 ni->ni_vht_mcsinfo.rx_highest = le16dec(ie + 8); 274 ni->ni_vht_mcsinfo.tx_mcs_map = le16dec(ie + 10); 275 ni->ni_vht_mcsinfo.tx_highest = le16dec(ie + 12); 276 } 277 278 int 279 ieee80211_vht_updateparams(struct ieee80211_node *ni, 280 const uint8_t *vhtcap_ie, 281 const uint8_t *vhtop_ie) 282 { 283 284 //printf("%s: called\n", __func__); 285 286 ieee80211_parse_vhtcap(ni, vhtcap_ie); 287 ieee80211_parse_vhtopmode(ni, vhtop_ie); 288 return (0); 289 } 290 291 void 292 ieee80211_setup_vht_rates(struct ieee80211_node *ni, 293 const uint8_t *vhtcap_ie, 294 const uint8_t *vhtop_ie) 295 { 296 297 //printf("%s: called\n", __func__); 298 /* XXX TODO */ 299 } 300 301 void 302 ieee80211_vht_timeout(struct ieee80211vap *vap) 303 { 304 } 305 306 void 307 ieee80211_vht_node_join(struct ieee80211_node *ni) 308 { 309 310 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, 311 "%s: called", __func__); 312 } 313 314 void 315 ieee80211_vht_node_leave(struct ieee80211_node *ni) 316 { 317 318 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, 319 "%s: called", __func__); 320 } 321 322 /* 323 * Calculate the VHTCAP IE for a given node. 324 * 325 * This includes calculating the capability intersection based on the 326 * current operating mode and intersection of the TX/RX MCS maps. 327 * 328 * The standard only makes it clear about MCS rate negotiation 329 * and MCS basic rates (which must be a subset of the general 330 * negotiated rates). It doesn't make it clear that the AP should 331 * figure out the minimum functional overlap with the STA and 332 * support that. 333 * 334 * Note: this is in host order, not in 802.11 endian order. 335 * 336 * TODO: ensure I re-read 9.7.11 Rate Selection for VHT STAs. 337 * 338 * TODO: investigate what we should negotiate for MU-MIMO beamforming 339 * options. 340 * 341 * opmode is '1' for "vhtcap as if I'm a STA", 0 otherwise. 342 */ 343 void 344 ieee80211_vht_get_vhtcap_ie(struct ieee80211_node *ni, 345 struct ieee80211_ie_vhtcap *vhtcap, int opmode) 346 { 347 struct ieee80211vap *vap = ni->ni_vap; 348 // struct ieee80211com *ic = vap->iv_ic; 349 uint32_t val, val1, val2; 350 uint32_t new_vhtcap; 351 int i; 352 353 vhtcap->ie = IEEE80211_ELEMID_VHT_CAP; 354 vhtcap->len = sizeof(struct ieee80211_ie_vhtcap) - 2; 355 356 /* 357 * Capabilities - it depends on whether we are a station 358 * or not. 359 */ 360 new_vhtcap = 0; 361 362 /* 363 * Station - use our desired configuration based on 364 * local config, local device bits and the already-learnt 365 * vhtcap/vhtinfo IE in the node. 366 */ 367 368 /* Limit MPDU size to the smaller of the two */ 369 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 370 IEEE80211_VHTCAP_MAX_MPDU_MASK); 371 if (opmode == 1) { 372 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 373 IEEE80211_VHTCAP_MAX_MPDU_MASK); 374 } 375 val = MIN(val1, val2); 376 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_MAX_MPDU_MASK); 377 378 /* Limit supp channel config */ 379 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 380 IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_MASK); 381 if (opmode == 1) { 382 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 383 IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_MASK); 384 } 385 if ((val2 == 2) && 386 ((vap->iv_flags_vht & IEEE80211_FVHT_USEVHT80P80) == 0)) 387 val2 = 1; 388 if ((val2 == 1) && 389 ((vap->iv_flags_vht & IEEE80211_FVHT_USEVHT160) == 0)) 390 val2 = 0; 391 val = MIN(val1, val2); 392 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 393 IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_MASK); 394 395 /* RX LDPC */ 396 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 397 IEEE80211_VHTCAP_RXLDPC); 398 if (opmode == 1) { 399 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 400 IEEE80211_VHTCAP_RXLDPC); 401 } 402 val = MIN(val1, val2); 403 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_RXLDPC); 404 405 /* Short-GI 80 */ 406 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 407 IEEE80211_VHTCAP_SHORT_GI_80); 408 if (opmode == 1) { 409 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 410 IEEE80211_VHTCAP_SHORT_GI_80); 411 } 412 val = MIN(val1, val2); 413 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_SHORT_GI_80); 414 415 /* Short-GI 160 */ 416 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 417 IEEE80211_VHTCAP_SHORT_GI_160); 418 if (opmode == 1) { 419 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 420 IEEE80211_VHTCAP_SHORT_GI_160); 421 } 422 val = MIN(val1, val2); 423 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_SHORT_GI_160); 424 425 /* 426 * STBC is slightly more complicated. 427 * 428 * In non-STA mode, we just announce our capabilities and that 429 * is that. 430 * 431 * In STA mode, we should calculate our capabilities based on 432 * local capabilities /and/ what the remote says. So: 433 * 434 * + Only TX STBC if we support it and the remote supports RX STBC; 435 * + Only announce RX STBC if we support it and the remote supports 436 * TX STBC; 437 * + RX STBC should be the minimum of local and remote RX STBC; 438 */ 439 440 /* TX STBC */ 441 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 442 IEEE80211_VHTCAP_TXSTBC); 443 if (opmode == 1) { 444 /* STA mode - enable it only if node RXSTBC is non-zero */ 445 val2 = !! _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 446 IEEE80211_VHTCAP_RXSTBC_MASK); 447 } 448 val = MIN(val1, val2); 449 /* XXX For now, use the 11n config flag */ 450 if ((vap->iv_flags_ht & IEEE80211_FHT_STBC_TX) == 0) 451 val = 0; 452 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_TXSTBC); 453 454 /* RX STBC1..4 */ 455 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 456 IEEE80211_VHTCAP_RXSTBC_MASK); 457 if (opmode == 1) { 458 /* STA mode - enable it only if node TXSTBC is non-zero */ 459 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 460 IEEE80211_VHTCAP_TXSTBC); 461 } 462 val = MIN(val1, val2); 463 /* XXX For now, use the 11n config flag */ 464 if ((vap->iv_flags_ht & IEEE80211_FHT_STBC_RX) == 0) 465 val = 0; 466 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_RXSTBC_MASK); 467 468 /* 469 * Finally - if RXSTBC is 0, then don't enable TXSTBC. 470 * Strictly speaking a device can TXSTBC and not RXSTBC, but 471 * it would be silly. 472 */ 473 if (val == 0) 474 new_vhtcap &= ~IEEE80211_VHTCAP_TXSTBC; 475 476 /* 477 * Some of these fields require other fields to exist. 478 * So before using it, the parent field needs to be checked 479 * otherwise the overridden value may be wrong. 480 * 481 * For example, if SU beamformee is set to 0, then BF STS 482 * needs to be 0. 483 */ 484 485 /* SU Beamformer capable */ 486 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 487 IEEE80211_VHTCAP_SU_BEAMFORMER_CAPABLE); 488 if (opmode == 1) { 489 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 490 IEEE80211_VHTCAP_SU_BEAMFORMER_CAPABLE); 491 } 492 val = MIN(val1, val2); 493 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 494 IEEE80211_VHTCAP_SU_BEAMFORMER_CAPABLE); 495 496 /* SU Beamformee capable */ 497 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 498 IEEE80211_VHTCAP_SU_BEAMFORMEE_CAPABLE); 499 if (opmode == 1) { 500 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 501 IEEE80211_VHTCAP_SU_BEAMFORMEE_CAPABLE); 502 } 503 val = MIN(val1, val2); 504 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 505 IEEE80211_VHTCAP_SU_BEAMFORMEE_CAPABLE); 506 507 /* Beamformee STS capability - only if SU beamformee capable */ 508 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 509 IEEE80211_VHTCAP_BEAMFORMEE_STS_MASK); 510 if (opmode == 1) { 511 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 512 IEEE80211_VHTCAP_BEAMFORMEE_STS_MASK); 513 } 514 val = MIN(val1, val2); 515 if ((new_vhtcap & IEEE80211_VHTCAP_SU_BEAMFORMEE_CAPABLE) == 0) 516 val = 0; 517 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 518 IEEE80211_VHTCAP_BEAMFORMEE_STS_MASK); 519 520 /* Sounding dimensions - only if SU beamformer capable */ 521 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 522 IEEE80211_VHTCAP_SOUNDING_DIMENSIONS_MASK); 523 if (opmode == 1) 524 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 525 IEEE80211_VHTCAP_SOUNDING_DIMENSIONS_MASK); 526 val = MIN(val1, val2); 527 if ((new_vhtcap & IEEE80211_VHTCAP_SU_BEAMFORMER_CAPABLE) == 0) 528 val = 0; 529 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 530 IEEE80211_VHTCAP_SOUNDING_DIMENSIONS_MASK); 531 532 /* 533 * MU Beamformer capable - only if SU BFF capable, MU BFF capable 534 * and STA (not AP) 535 */ 536 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 537 IEEE80211_VHTCAP_MU_BEAMFORMER_CAPABLE); 538 if (opmode == 1) 539 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 540 IEEE80211_VHTCAP_MU_BEAMFORMER_CAPABLE); 541 val = MIN(val1, val2); 542 if ((new_vhtcap & IEEE80211_VHTCAP_SU_BEAMFORMER_CAPABLE) == 0) 543 val = 0; 544 if (opmode != 1) /* Only enable for STA mode */ 545 val = 0; 546 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 547 IEEE80211_VHTCAP_SU_BEAMFORMER_CAPABLE); 548 549 /* 550 * MU Beamformee capable - only if SU BFE capable, MU BFE capable 551 * and AP (not STA) 552 */ 553 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 554 IEEE80211_VHTCAP_MU_BEAMFORMEE_CAPABLE); 555 if (opmode == 1) 556 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 557 IEEE80211_VHTCAP_MU_BEAMFORMEE_CAPABLE); 558 val = MIN(val1, val2); 559 if ((new_vhtcap & IEEE80211_VHTCAP_SU_BEAMFORMEE_CAPABLE) == 0) 560 val = 0; 561 if (opmode != 0) /* Only enable for AP mode */ 562 val = 0; 563 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 564 IEEE80211_VHTCAP_SU_BEAMFORMEE_CAPABLE); 565 566 /* VHT TXOP PS */ 567 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 568 IEEE80211_VHTCAP_VHT_TXOP_PS); 569 if (opmode == 1) 570 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 571 IEEE80211_VHTCAP_VHT_TXOP_PS); 572 val = MIN(val1, val2); 573 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_VHT_TXOP_PS); 574 575 /* HTC_VHT */ 576 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 577 IEEE80211_VHTCAP_HTC_VHT); 578 if (opmode == 1) 579 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 580 IEEE80211_VHTCAP_HTC_VHT); 581 val = MIN(val1, val2); 582 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_HTC_VHT); 583 584 /* A-MPDU length max */ 585 /* XXX TODO: we need a userland config knob for this */ 586 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 587 IEEE80211_VHTCAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK); 588 if (opmode == 1) 589 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 590 IEEE80211_VHTCAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK); 591 val = MIN(val1, val2); 592 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 593 IEEE80211_VHTCAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK); 594 595 /* 596 * Link adaptation is only valid if HTC-VHT capable is 1. 597 * Otherwise, always set it to 0. 598 */ 599 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 600 IEEE80211_VHTCAP_VHT_LINK_ADAPTATION_VHT_MASK); 601 if (opmode == 1) 602 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 603 IEEE80211_VHTCAP_VHT_LINK_ADAPTATION_VHT_MASK); 604 val = MIN(val1, val2); 605 if ((new_vhtcap & IEEE80211_VHTCAP_HTC_VHT) == 0) 606 val = 0; 607 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 608 IEEE80211_VHTCAP_VHT_LINK_ADAPTATION_VHT_MASK); 609 610 /* 611 * The following two options are 0 if the pattern may change, 1 if it 612 * does not change. So, downgrade to the higher value. 613 */ 614 615 /* RX antenna pattern */ 616 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 617 IEEE80211_VHTCAP_RX_ANTENNA_PATTERN); 618 if (opmode == 1) 619 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 620 IEEE80211_VHTCAP_RX_ANTENNA_PATTERN); 621 val = MAX(val1, val2); 622 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 623 IEEE80211_VHTCAP_RX_ANTENNA_PATTERN); 624 625 /* TX antenna pattern */ 626 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 627 IEEE80211_VHTCAP_TX_ANTENNA_PATTERN); 628 if (opmode == 1) 629 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 630 IEEE80211_VHTCAP_TX_ANTENNA_PATTERN); 631 val = MAX(val1, val2); 632 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 633 IEEE80211_VHTCAP_TX_ANTENNA_PATTERN); 634 635 /* 636 * MCS set - again, we announce what we want to use 637 * based on configuration, device capabilities and 638 * already-learnt vhtcap/vhtinfo IE information. 639 */ 640 641 /* MCS set - start with whatever the device supports */ 642 vhtcap->supp_mcs.rx_mcs_map = vap->iv_vht_mcsinfo.rx_mcs_map; 643 vhtcap->supp_mcs.rx_highest = 0; 644 vhtcap->supp_mcs.tx_mcs_map = vap->iv_vht_mcsinfo.tx_mcs_map; 645 vhtcap->supp_mcs.tx_highest = 0; 646 647 vhtcap->vht_cap_info = new_vhtcap; 648 649 /* 650 * Now, if we're a STA, mask off whatever the AP doesn't support. 651 * Ie, we continue to state we can receive whatever we can do, 652 * but we only announce that we will transmit rates that meet 653 * the AP requirement. 654 * 655 * Note: 0 - MCS0..7; 1 - MCS0..8; 2 - MCS0..9; 3 = not supported. 656 * We can't just use MIN() because '3' means "no", so special case it. 657 */ 658 if (opmode) { 659 for (i = 0; i < 8; i++) { 660 val1 = (vhtcap->supp_mcs.tx_mcs_map >> (i*2)) & 0x3; 661 val2 = (ni->ni_vht_mcsinfo.tx_mcs_map >> (i*2)) & 0x3; 662 val = MIN(val1, val2); 663 if (val1 == 3 || val2 == 3) 664 val = 3; 665 vhtcap->supp_mcs.tx_mcs_map &= ~(0x3 << (i*2)); 666 vhtcap->supp_mcs.tx_mcs_map |= (val << (i*2)); 667 } 668 } 669 } 670 671 /* 672 * Add a VHTCAP field. 673 * 674 * If in station mode, we announce what we would like our 675 * desired configuration to be. 676 * 677 * Else, we announce our capabilities based on our current 678 * configuration. 679 */ 680 uint8_t * 681 ieee80211_add_vhtcap(uint8_t *frm, struct ieee80211_node *ni) 682 { 683 struct ieee80211_ie_vhtcap vhtcap; 684 int opmode; 685 686 opmode = 0; 687 if (ni->ni_vap->iv_opmode == IEEE80211_M_STA) 688 opmode = 1; 689 690 ieee80211_vht_get_vhtcap_ie(ni, &vhtcap, opmode); 691 692 memset(frm, '\0', sizeof(struct ieee80211_ie_vhtcap)); 693 694 frm[0] = IEEE80211_ELEMID_VHT_CAP; 695 frm[1] = sizeof(struct ieee80211_ie_vhtcap) - 2; 696 frm += 2; 697 698 /* 32-bit VHT capability */ 699 ADDWORD(frm, vhtcap.vht_cap_info); 700 701 /* suppmcs */ 702 ADDSHORT(frm, vhtcap.supp_mcs.rx_mcs_map); 703 ADDSHORT(frm, vhtcap.supp_mcs.rx_highest); 704 ADDSHORT(frm, vhtcap.supp_mcs.tx_mcs_map); 705 ADDSHORT(frm, vhtcap.supp_mcs.tx_highest); 706 707 return (frm); 708 } 709 710 static uint8_t 711 ieee80211_vht_get_chwidth_ie(struct ieee80211_channel *c) 712 { 713 714 /* 715 * XXX TODO: look at the node configuration as 716 * well? 717 */ 718 719 if (IEEE80211_IS_CHAN_VHT80P80(c)) 720 return IEEE80211_VHT_CHANWIDTH_80P80MHZ; 721 if (IEEE80211_IS_CHAN_VHT160(c)) 722 return IEEE80211_VHT_CHANWIDTH_160MHZ; 723 if (IEEE80211_IS_CHAN_VHT80(c)) 724 return IEEE80211_VHT_CHANWIDTH_80MHZ; 725 if (IEEE80211_IS_CHAN_VHT40(c)) 726 return IEEE80211_VHT_CHANWIDTH_USE_HT; 727 if (IEEE80211_IS_CHAN_VHT20(c)) 728 return IEEE80211_VHT_CHANWIDTH_USE_HT; 729 730 /* We shouldn't get here */ 731 printf("%s: called on a non-VHT channel (freq=%d, flags=0x%08x\n", 732 __func__, (int) c->ic_freq, c->ic_flags); 733 return IEEE80211_VHT_CHANWIDTH_USE_HT; 734 } 735 736 /* 737 * Note: this just uses the current channel information; 738 * it doesn't use the node info after parsing. 739 * 740 * XXX TODO: need to make the basic MCS set configurable. 741 * XXX TODO: read 802.11-2013 to determine what to set 742 * chwidth to when scanning. I have a feeling 743 * it isn't involved in scanning and we shouldn't 744 * be sending it; and I don't yet know what to set 745 * it to for IBSS or hostap where the peer may be 746 * a completely different channel width to us. 747 */ 748 uint8_t * 749 ieee80211_add_vhtinfo(uint8_t *frm, struct ieee80211_node *ni) 750 { 751 memset(frm, '\0', sizeof(struct ieee80211_ie_vht_operation)); 752 753 frm[0] = IEEE80211_ELEMID_VHT_OPMODE; 754 frm[1] = sizeof(struct ieee80211_ie_vht_operation) - 2; 755 frm += 2; 756 757 /* 8-bit chanwidth */ 758 *frm++ = ieee80211_vht_get_chwidth_ie(ni->ni_chan); 759 760 /* 8-bit freq1 */ 761 *frm++ = ni->ni_chan->ic_vht_ch_freq1; 762 763 /* 8-bit freq2 */ 764 *frm++ = ni->ni_chan->ic_vht_ch_freq2; 765 766 /* 16-bit basic MCS set - just MCS0..7 for NSS=1 for now */ 767 ADDSHORT(frm, 0xfffc); 768 769 return (frm); 770 } 771 772 void 773 ieee80211_vht_update_cap(struct ieee80211_node *ni, const uint8_t *vhtcap_ie, 774 const uint8_t *vhtop_ie) 775 { 776 777 ieee80211_parse_vhtcap(ni, vhtcap_ie); 778 ieee80211_parse_vhtopmode(ni, vhtop_ie); 779 } 780 781 static struct ieee80211_channel * 782 findvhtchan(struct ieee80211com *ic, struct ieee80211_channel *c, int vhtflags) 783 { 784 785 return (ieee80211_find_channel(ic, c->ic_freq, 786 (c->ic_flags & ~IEEE80211_CHAN_VHT) | vhtflags)); 787 } 788 789 /* 790 * Handle channel promotion to VHT, similar to ieee80211_ht_adjust_channel(). 791 */ 792 struct ieee80211_channel * 793 ieee80211_vht_adjust_channel(struct ieee80211com *ic, 794 struct ieee80211_channel *chan, int flags) 795 { 796 struct ieee80211_channel *c; 797 798 /* First case - handle channel demotion - if VHT isn't set */ 799 if ((flags & IEEE80211_FVHT_MASK) == 0) { 800 #if 0 801 printf("%s: demoting channel %d/0x%08x\n", __func__, 802 chan->ic_ieee, chan->ic_flags); 803 #endif 804 c = ieee80211_find_channel(ic, chan->ic_freq, 805 chan->ic_flags & ~IEEE80211_CHAN_VHT); 806 if (c == NULL) 807 c = chan; 808 #if 0 809 printf("%s: .. to %d/0x%08x\n", __func__, 810 c->ic_ieee, c->ic_flags); 811 #endif 812 return (c); 813 } 814 815 /* 816 * We can upgrade to VHT - attempt to do so 817 * 818 * Note: we don't clear the HT flags, these are the hints 819 * for HT40U/HT40D when selecting VHT40 or larger channels. 820 */ 821 c = NULL; 822 if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT160)) 823 c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT160); 824 825 if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT80P80)) 826 c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT80P80); 827 828 if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT80)) 829 c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT80); 830 831 if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT40)) 832 c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT40U); 833 if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT40)) 834 c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT40D); 835 /* 836 * If we get here, VHT20 is always possible because we checked 837 * for IEEE80211_FVHT_VHT above. 838 */ 839 if (c == NULL) 840 c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT20); 841 842 if (c != NULL) 843 chan = c; 844 845 #if 0 846 printf("%s: selected %d/0x%08x\n", __func__, c->ic_ieee, c->ic_flags); 847 #endif 848 return (chan); 849 } 850 851 /* 852 * Calculate the VHT operation IE for a given node. 853 * 854 * This includes calculating the suitable channel width/parameters 855 * and basic MCS set. 856 * 857 * TODO: ensure I read 9.7.11 Rate Selection for VHT STAs. 858 * TODO: ensure I read 10.39.7 - BSS Basic VHT-MCS and NSS set operation. 859 */ 860 void 861 ieee80211_vht_get_vhtinfo_ie(struct ieee80211_node *ni, 862 struct ieee80211_ie_vht_operation *vhtop, int opmode) 863 { 864 printf("%s: called; TODO!\n", __func__); 865 } 866