1 /*- 2 * SPDX-License-Identifier: BSD-3-Clause 3 * 4 * Copyright (c) 1982, 1986, 1990, 1993 5 * The Regents of the University of California. 6 * Copyright (c) 2010-2011 Juniper Networks, Inc. 7 * All rights reserved. 8 * 9 * Portions of this software were developed by Robert N. M. Watson under 10 * contract to Juniper Networks, Inc. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright 18 * notice, this list of conditions and the following disclaimer in the 19 * documentation and/or other materials provided with the distribution. 20 * 3. Neither the name of the University nor the names of its contributors 21 * may be used to endorse or promote products derived from this software 22 * without specific prior written permission. 23 * 24 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 25 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 27 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 30 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 31 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 32 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 33 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 34 * SUCH DAMAGE. 35 * 36 * @(#)in_pcb.h 8.1 (Berkeley) 6/10/93 37 * $FreeBSD$ 38 */ 39 40 #ifndef _NETINET_IN_PCB_H_ 41 #define _NETINET_IN_PCB_H_ 42 43 #include <sys/queue.h> 44 #include <sys/epoch.h> 45 #include <sys/_lock.h> 46 #include <sys/_mutex.h> 47 #include <sys/_rwlock.h> 48 #include <net/route.h> 49 50 #ifdef _KERNEL 51 #include <sys/lock.h> 52 #include <sys/proc.h> 53 #include <sys/rwlock.h> 54 #include <sys/smr.h> 55 #include <sys/sysctl.h> 56 #include <net/vnet.h> 57 #include <vm/uma.h> 58 #endif 59 #include <sys/ck.h> 60 61 /* 62 * struct inpcb is the common protocol control block structure used in most 63 * IP transport protocols. 64 * 65 * Pointers to local and foreign host table entries, local and foreign socket 66 * numbers, and pointers up (to a socket structure) and down (to a 67 * protocol-specific control block) are stored here. 68 */ 69 CK_LIST_HEAD(inpcbhead, inpcb); 70 CK_LIST_HEAD(inpcbporthead, inpcbport); 71 CK_LIST_HEAD(inpcblbgrouphead, inpcblbgroup); 72 typedef uint64_t inp_gen_t; 73 74 /* 75 * PCB with AF_INET6 null bind'ed laddr can receive AF_INET input packet. 76 * So, AF_INET6 null laddr is also used as AF_INET null laddr, by utilizing 77 * the following structure. This requires padding always be zeroed out, 78 * which is done right after inpcb allocation and stays through its lifetime. 79 */ 80 struct in_addr_4in6 { 81 u_int32_t ia46_pad32[3]; 82 struct in_addr ia46_addr4; 83 }; 84 85 union in_dependaddr { 86 struct in_addr_4in6 id46_addr; 87 struct in6_addr id6_addr; 88 }; 89 90 /* 91 * NOTE: ipv6 addrs should be 64-bit aligned, per RFC 2553. in_conninfo has 92 * some extra padding to accomplish this. 93 * NOTE 2: tcp_syncache.c uses first 5 32-bit words, which identify fport, 94 * lport, faddr to generate hash, so these fields shouldn't be moved. 95 */ 96 struct in_endpoints { 97 u_int16_t ie_fport; /* foreign port */ 98 u_int16_t ie_lport; /* local port */ 99 /* protocol dependent part, local and foreign addr */ 100 union in_dependaddr ie_dependfaddr; /* foreign host table entry */ 101 union in_dependaddr ie_dependladdr; /* local host table entry */ 102 #define ie_faddr ie_dependfaddr.id46_addr.ia46_addr4 103 #define ie_laddr ie_dependladdr.id46_addr.ia46_addr4 104 #define ie6_faddr ie_dependfaddr.id6_addr 105 #define ie6_laddr ie_dependladdr.id6_addr 106 u_int32_t ie6_zoneid; /* scope zone id */ 107 }; 108 109 /* 110 * XXX The defines for inc_* are hacks and should be changed to direct 111 * references. 112 */ 113 struct in_conninfo { 114 u_int8_t inc_flags; 115 u_int8_t inc_len; 116 u_int16_t inc_fibnum; /* XXX was pad, 16 bits is plenty */ 117 /* protocol dependent part */ 118 struct in_endpoints inc_ie; 119 }; 120 121 /* 122 * Flags for inc_flags. 123 */ 124 #define INC_ISIPV6 0x01 125 #define INC_IPV6MINMTU 0x02 126 127 #define inc_fport inc_ie.ie_fport 128 #define inc_lport inc_ie.ie_lport 129 #define inc_faddr inc_ie.ie_faddr 130 #define inc_laddr inc_ie.ie_laddr 131 #define inc6_faddr inc_ie.ie6_faddr 132 #define inc6_laddr inc_ie.ie6_laddr 133 #define inc6_zoneid inc_ie.ie6_zoneid 134 135 #if defined(_KERNEL) || defined(_WANT_INPCB) 136 /* 137 * struct inpcb captures the network layer state for TCP, UDP, and raw IPv4 and 138 * IPv6 sockets. In the case of TCP and UDP, further per-connection state is 139 * hung off of inp_ppcb most of the time. Almost all fields of struct inpcb 140 * are static after creation or protected by a per-inpcb rwlock, inp_lock. 141 * 142 * A inpcb database is indexed by addresses/ports hash as well as list of 143 * all pcbs that belong to a certain proto. Database lookups or list traversals 144 * are be performed inside SMR section. Once desired PCB is found its own 145 * lock is to be obtained and SMR section exited. 146 * 147 * Key: 148 * (b) - Protected by the hpts lock. 149 * (c) - Constant after initialization 150 * (e) - Protected by the SMR section 151 * (i) - Protected by the inpcb lock 152 * (p) - Protected by the pcbinfo lock for the inpcb 153 * (h) - Protected by the pcbhash lock for the inpcb 154 * (s) - Protected by another subsystem's locks 155 * (x) - Undefined locking 156 * 157 * Notes on the tcp_hpts: 158 * 159 * First Hpts lock order is 160 * 1) INP_WLOCK() 161 * 2) HPTS_LOCK() i.e. hpts->pmtx 162 * 163 * To insert a TCB on the hpts you *must* be holding the INP_WLOCK(). 164 * You may check the inp->inp_in_hpts flag without the hpts lock. 165 * The hpts is the only one that will clear this flag holding 166 * only the hpts lock. This means that in your tcp_output() 167 * routine when you test for the inp_in_hpts flag to be 1 168 * it may be transitioning to 0 (by the hpts). 169 * That's ok since that will just mean an extra call to tcp_output 170 * that most likely will find the call you executed 171 * (when the mis-match occurred) will have put the TCB back 172 * on the hpts and it will return. If your 173 * call did not add the inp back to the hpts then you will either 174 * over-send or the cwnd will block you from sending more. 175 * 176 * Note you should also be holding the INP_WLOCK() when you 177 * call the remove from the hpts as well. Though usually 178 * you are either doing this from a timer, where you need and have 179 * the INP_WLOCK() or from destroying your TCB where again 180 * you should already have the INP_WLOCK(). 181 * 182 * The inp_hpts_cpu, inp_hpts_cpu_set, inp_input_cpu and 183 * inp_input_cpu_set fields are controlled completely by 184 * the hpts. Do not ever set these. The inp_hpts_cpu_set 185 * and inp_input_cpu_set fields indicate if the hpts has 186 * setup the respective cpu field. It is advised if this 187 * field is 0, to enqueue the packet with the appropriate 188 * hpts_immediate() call. If the _set field is 1, then 189 * you may compare the inp_*_cpu field to the curcpu and 190 * may want to again insert onto the hpts if these fields 191 * are not equal (i.e. you are not on the expected CPU). 192 * 193 * A note on inp_hpts_calls and inp_input_calls, these 194 * flags are set when the hpts calls either the output 195 * or do_segment routines respectively. If the routine 196 * being called wants to use this, then it needs to 197 * clear the flag before returning. The hpts will not 198 * clear the flag. The flags can be used to tell if 199 * the hpts is the function calling the respective 200 * routine. 201 * 202 * A few other notes: 203 * 204 * When a read lock is held, stability of the field is guaranteed; to write 205 * to a field, a write lock must generally be held. 206 * 207 * netinet/netinet6-layer code should not assume that the inp_socket pointer 208 * is safe to dereference without inp_lock being held, there may be 209 * close(2)-related races. 210 * 211 * The inp_vflag field is overloaded, and would otherwise ideally be (c). 212 */ 213 struct icmp6_filter; 214 struct inpcbpolicy; 215 struct m_snd_tag; 216 struct inpcb { 217 /* Cache line #1 (amd64) */ 218 CK_LIST_ENTRY(inpcb) inp_hash; /* (w:h/r:e) hash list */ 219 struct rwlock inp_lock; 220 /* Cache line #2 (amd64) */ 221 #define inp_start_zero inp_hpts 222 #define inp_zero_size (sizeof(struct inpcb) - \ 223 offsetof(struct inpcb, inp_start_zero)) 224 TAILQ_ENTRY(inpcb) inp_hpts; /* pacing out queue next lock(b) */ 225 uint32_t inp_hpts_gencnt; /* XXXGL */ 226 uint32_t inp_hpts_request; /* Current hpts request, zero if 227 * fits in the pacing window (i&b). */ 228 /* 229 * Note the next fields are protected by a 230 * different lock (hpts-lock). This means that 231 * they must correspond in size to the smallest 232 * protectable bit field (uint8_t on x86, and 233 * other platfomrs potentially uint32_t?). Also 234 * since CPU switches can occur at different times the two 235 * fields can *not* be collapsed into a signal bit field. 236 */ 237 #if defined(__amd64__) || defined(__i386__) 238 uint8_t inp_in_hpts; /* on output hpts (lock b) */ 239 #else 240 uint32_t inp_in_hpts; /* on output hpts (lock b) */ 241 #endif 242 volatile uint16_t inp_hpts_cpu; /* Lock (i) */ 243 volatile uint16_t inp_irq_cpu; /* Set by LRO in behalf of or the driver */ 244 u_int inp_refcount; /* (i) refcount */ 245 int inp_flags; /* (i) generic IP/datagram flags */ 246 int inp_flags2; /* (i) generic IP/datagram flags #2*/ 247 uint8_t inp_hpts_cpu_set :1, /* on output hpts (i) */ 248 inp_hpts_calls :1, /* (i) from output hpts */ 249 inp_irq_cpu_set :1, /* (i) from LRO/Driver */ 250 inp_spare_bits2 : 3; 251 uint8_t inp_numa_domain; /* numa domain */ 252 void *inp_ppcb; /* (i) pointer to per-protocol pcb */ 253 struct socket *inp_socket; /* (i) back pointer to socket */ 254 int32_t inp_hptsslot; /* Hpts wheel slot this tcb is Lock(i&b) */ 255 uint32_t inp_hpts_drop_reas; /* reason we are dropping the PCB (lock i&b) */ 256 struct inpcbinfo *inp_pcbinfo; /* (c) PCB list info */ 257 struct ucred *inp_cred; /* (c) cache of socket cred */ 258 u_int32_t inp_flow; /* (i) IPv6 flow information */ 259 u_char inp_vflag; /* (i) IP version flag (v4/v6) */ 260 u_char inp_ip_ttl; /* (i) time to live proto */ 261 u_char inp_ip_p; /* (c) protocol proto */ 262 u_char inp_ip_minttl; /* (i) minimum TTL or drop */ 263 uint32_t inp_flowid; /* (x) flow id / queue id */ 264 struct m_snd_tag *inp_snd_tag; /* (i) send tag for outgoing mbufs */ 265 uint32_t inp_flowtype; /* (x) M_HASHTYPE value */ 266 267 /* Local and foreign ports, local and foreign addr. */ 268 struct in_conninfo inp_inc; /* (i) list for PCB's local port */ 269 270 /* MAC and IPSEC policy information. */ 271 struct label *inp_label; /* (i) MAC label */ 272 struct inpcbpolicy *inp_sp; /* (s) for IPSEC */ 273 274 /* Protocol-dependent part; options. */ 275 struct { 276 u_char inp_ip_tos; /* (i) type of service proto */ 277 struct mbuf *inp_options; /* (i) IP options */ 278 struct ip_moptions *inp_moptions; /* (i) mcast options */ 279 }; 280 struct { 281 /* (i) IP options */ 282 struct mbuf *in6p_options; 283 /* (i) IP6 options for outgoing packets */ 284 struct ip6_pktopts *in6p_outputopts; 285 /* (i) IP multicast options */ 286 struct ip6_moptions *in6p_moptions; 287 /* (i) ICMPv6 code type filter */ 288 struct icmp6_filter *in6p_icmp6filt; 289 /* (i) IPV6_CHECKSUM setsockopt */ 290 int in6p_cksum; 291 short in6p_hops; 292 }; 293 CK_LIST_ENTRY(inpcb) inp_portlist; /* (r:e/w:h) port list */ 294 struct inpcbport *inp_phd; /* (r:e/w:h) head of this list */ 295 inp_gen_t inp_gencnt; /* (c) generation count */ 296 void *spare_ptr; /* Spare pointer. */ 297 rt_gen_t inp_rt_cookie; /* generation for route entry */ 298 union { /* cached L3 information */ 299 struct route inp_route; 300 struct route_in6 inp_route6; 301 }; 302 CK_LIST_ENTRY(inpcb) inp_list; /* (r:e/w:p) all PCBs for proto */ 303 }; 304 #endif /* _KERNEL */ 305 306 #define inp_fport inp_inc.inc_fport 307 #define inp_lport inp_inc.inc_lport 308 #define inp_faddr inp_inc.inc_faddr 309 #define inp_laddr inp_inc.inc_laddr 310 311 #define in6p_faddr inp_inc.inc6_faddr 312 #define in6p_laddr inp_inc.inc6_laddr 313 #define in6p_zoneid inp_inc.inc6_zoneid 314 315 #define inp_vnet inp_pcbinfo->ipi_vnet 316 317 /* 318 * The range of the generation count, as used in this implementation, is 9e19. 319 * We would have to create 300 billion connections per second for this number 320 * to roll over in a year. This seems sufficiently unlikely that we simply 321 * don't concern ourselves with that possibility. 322 */ 323 324 /* 325 * Interface exported to userland by various protocols which use inpcbs. Hack 326 * alert -- only define if struct xsocket is in scope. 327 * Fields prefixed with "xi_" are unique to this structure, and the rest 328 * match fields in the struct inpcb, to ease coding and porting. 329 * 330 * Legend: 331 * (s) - used by userland utilities in src 332 * (p) - used by utilities in ports 333 * (3) - is known to be used by third party software not in ports 334 * (n) - no known usage 335 */ 336 #ifdef _SYS_SOCKETVAR_H_ 337 struct xinpcb { 338 ksize_t xi_len; /* length of this structure */ 339 struct xsocket xi_socket; /* (s,p) */ 340 struct in_conninfo inp_inc; /* (s,p) */ 341 uint64_t inp_gencnt; /* (s,p) */ 342 kvaddr_t inp_ppcb; /* (s) netstat(1) */ 343 int64_t inp_spare64[4]; 344 uint32_t inp_flow; /* (s) */ 345 uint32_t inp_flowid; /* (s) */ 346 uint32_t inp_flowtype; /* (s) */ 347 int32_t inp_flags; /* (s,p) */ 348 int32_t inp_flags2; /* (s) */ 349 uint32_t inp_unused; 350 int32_t in6p_cksum; /* (n) */ 351 int32_t inp_spare32[4]; 352 uint16_t in6p_hops; /* (n) */ 353 uint8_t inp_ip_tos; /* (n) */ 354 int8_t pad8; 355 uint8_t inp_vflag; /* (s,p) */ 356 uint8_t inp_ip_ttl; /* (n) */ 357 uint8_t inp_ip_p; /* (n) */ 358 uint8_t inp_ip_minttl; /* (n) */ 359 int8_t inp_spare8[4]; 360 } __aligned(8); 361 362 struct xinpgen { 363 ksize_t xig_len; /* length of this structure */ 364 u_int xig_count; /* number of PCBs at this time */ 365 uint32_t _xig_spare32; 366 inp_gen_t xig_gen; /* generation count at this time */ 367 so_gen_t xig_sogen; /* socket generation count this time */ 368 uint64_t _xig_spare64[4]; 369 } __aligned(8); 370 371 struct sockopt_parameters { 372 struct in_conninfo sop_inc; 373 uint64_t sop_id; 374 int sop_level; 375 int sop_optname; 376 char sop_optval[]; 377 }; 378 379 #ifdef _KERNEL 380 int sysctl_setsockopt(SYSCTL_HANDLER_ARGS, struct inpcbinfo *pcbinfo, 381 int (*ctloutput_set)(struct inpcb *, struct sockopt *)); 382 void in_pcbtoxinpcb(const struct inpcb *, struct xinpcb *); 383 #endif 384 #endif /* _SYS_SOCKETVAR_H_ */ 385 386 #ifdef _KERNEL 387 /* 388 * Per-VNET pcb database for each high-level protocol (UDP, TCP, ...) in both 389 * IPv4 and IPv6. 390 * 391 * The pcbs are protected with SMR section and thus all lists in inpcbinfo 392 * are CK-lists. Locking is required to insert a pcb into database. Two 393 * locks are provided: one for the hash and one for the global list of pcbs, 394 * as well as overall count and generation count. 395 * 396 * Locking key: 397 * 398 * (c) Constant or nearly constant after initialisation 399 * (e) Protected by SMR section 400 * (g) Locked by ipi_lock 401 * (h) Locked by ipi_hash_lock 402 */ 403 struct inpcbinfo { 404 /* 405 * Global lock protecting inpcb list modification 406 */ 407 struct mtx ipi_lock; 408 struct inpcbhead ipi_listhead; /* (r:e/w:g) */ 409 u_int ipi_count; /* (g) */ 410 411 /* 412 * Generation count -- incremented each time a connection is allocated 413 * or freed. 414 */ 415 u_quad_t ipi_gencnt; /* (g) */ 416 417 /* 418 * Fields associated with port lookup and allocation. 419 */ 420 u_short ipi_lastport; /* (h) */ 421 u_short ipi_lastlow; /* (h) */ 422 u_short ipi_lasthi; /* (h) */ 423 424 /* 425 * UMA zone from which inpcbs are allocated for this protocol. 426 */ 427 uma_zone_t ipi_zone; /* (c) */ 428 uma_zone_t ipi_portzone; /* (c) */ 429 smr_t ipi_smr; /* (c) */ 430 431 /* 432 * Global hash of inpcbs, hashed by local and foreign addresses and 433 * port numbers. 434 */ 435 struct mtx ipi_hash_lock; 436 struct inpcbhead *ipi_hashbase; /* (r:e/w:h) */ 437 u_long ipi_hashmask; /* (c) */ 438 439 /* 440 * Global hash of inpcbs, hashed by only local port number. 441 */ 442 struct inpcbporthead *ipi_porthashbase; /* (h) */ 443 u_long ipi_porthashmask; /* (h) */ 444 445 /* 446 * Load balance groups used for the SO_REUSEPORT_LB option, 447 * hashed by local port. 448 */ 449 struct inpcblbgrouphead *ipi_lbgrouphashbase; /* (r:e/w:h) */ 450 u_long ipi_lbgrouphashmask; /* (h) */ 451 452 /* 453 * Pointer to network stack instance 454 */ 455 struct vnet *ipi_vnet; /* (c) */ 456 }; 457 458 /* 459 * Global allocation storage for each high-level protocol (UDP, TCP, ...). 460 * Each corresponding per-VNET inpcbinfo points into this one. 461 */ 462 struct inpcbstorage { 463 uma_zone_t ips_zone; 464 uma_zone_t ips_portzone; 465 uma_init ips_pcbinit; 466 size_t ips_size; 467 const char * ips_zone_name; 468 const char * ips_portzone_name; 469 const char * ips_infolock_name; 470 const char * ips_hashlock_name; 471 }; 472 473 #define INPCBSTORAGE_DEFINE(prot, ppcb, lname, zname, iname, hname) \ 474 static int \ 475 prot##_inpcb_init(void *mem, int size __unused, int flags __unused) \ 476 { \ 477 struct inpcb *inp = mem; \ 478 \ 479 rw_init_flags(&inp->inp_lock, lname, RW_RECURSE | RW_DUPOK); \ 480 return (0); \ 481 } \ 482 static struct inpcbstorage prot = { \ 483 .ips_size = sizeof(struct ppcb), \ 484 .ips_pcbinit = prot##_inpcb_init, \ 485 .ips_zone_name = zname, \ 486 .ips_portzone_name = zname " ports", \ 487 .ips_infolock_name = iname, \ 488 .ips_hashlock_name = hname, \ 489 }; \ 490 SYSINIT(prot##_inpcbstorage_init, SI_SUB_PROTO_DOMAIN, \ 491 SI_ORDER_SECOND, in_pcbstorage_init, &prot); \ 492 SYSUNINIT(prot##_inpcbstorage_uninit, SI_SUB_PROTO_DOMAIN, \ 493 SI_ORDER_SECOND, in_pcbstorage_destroy, &prot) 494 495 /* 496 * Load balance groups used for the SO_REUSEPORT_LB socket option. Each group 497 * (or unique address:port combination) can be re-used at most 498 * INPCBLBGROUP_SIZMAX (256) times. The inpcbs are stored in il_inp which 499 * is dynamically resized as processes bind/unbind to that specific group. 500 */ 501 struct inpcblbgroup { 502 CK_LIST_ENTRY(inpcblbgroup) il_list; 503 struct epoch_context il_epoch_ctx; 504 struct ucred *il_cred; 505 uint16_t il_lport; /* (c) */ 506 u_char il_vflag; /* (c) */ 507 uint8_t il_numa_domain; 508 uint32_t il_pad2; 509 union in_dependaddr il_dependladdr; /* (c) */ 510 #define il_laddr il_dependladdr.id46_addr.ia46_addr4 511 #define il6_laddr il_dependladdr.id6_addr 512 uint32_t il_inpsiz; /* max count in il_inp[] (h) */ 513 uint32_t il_inpcnt; /* cur count in il_inp[] (h) */ 514 struct inpcb *il_inp[]; /* (h) */ 515 }; 516 517 #define INP_LOCK_DESTROY(inp) rw_destroy(&(inp)->inp_lock) 518 #define INP_RLOCK(inp) rw_rlock(&(inp)->inp_lock) 519 #define INP_WLOCK(inp) rw_wlock(&(inp)->inp_lock) 520 #define INP_TRY_RLOCK(inp) rw_try_rlock(&(inp)->inp_lock) 521 #define INP_TRY_WLOCK(inp) rw_try_wlock(&(inp)->inp_lock) 522 #define INP_RUNLOCK(inp) rw_runlock(&(inp)->inp_lock) 523 #define INP_WUNLOCK(inp) rw_wunlock(&(inp)->inp_lock) 524 #define INP_UNLOCK(inp) rw_unlock(&(inp)->inp_lock) 525 #define INP_TRY_UPGRADE(inp) rw_try_upgrade(&(inp)->inp_lock) 526 #define INP_DOWNGRADE(inp) rw_downgrade(&(inp)->inp_lock) 527 #define INP_WLOCKED(inp) rw_wowned(&(inp)->inp_lock) 528 #define INP_LOCK_ASSERT(inp) rw_assert(&(inp)->inp_lock, RA_LOCKED) 529 #define INP_RLOCK_ASSERT(inp) rw_assert(&(inp)->inp_lock, RA_RLOCKED) 530 #define INP_WLOCK_ASSERT(inp) rw_assert(&(inp)->inp_lock, RA_WLOCKED) 531 #define INP_UNLOCK_ASSERT(inp) rw_assert(&(inp)->inp_lock, RA_UNLOCKED) 532 533 /* 534 * These locking functions are for inpcb consumers outside of sys/netinet, 535 * more specifically, they were added for the benefit of TOE drivers. The 536 * macros are reserved for use by the stack. 537 */ 538 void inp_wlock(struct inpcb *); 539 void inp_wunlock(struct inpcb *); 540 void inp_rlock(struct inpcb *); 541 void inp_runlock(struct inpcb *); 542 543 #ifdef INVARIANT_SUPPORT 544 void inp_lock_assert(struct inpcb *); 545 void inp_unlock_assert(struct inpcb *); 546 #else 547 #define inp_lock_assert(inp) do {} while (0) 548 #define inp_unlock_assert(inp) do {} while (0) 549 #endif 550 551 void inp_apply_all(struct inpcbinfo *, void (*func)(struct inpcb *, void *), 552 void *arg); 553 int inp_ip_tos_get(const struct inpcb *inp); 554 void inp_ip_tos_set(struct inpcb *inp, int val); 555 struct socket * 556 inp_inpcbtosocket(struct inpcb *inp); 557 struct tcpcb * 558 inp_inpcbtotcpcb(struct inpcb *inp); 559 void inp_4tuple_get(struct inpcb *inp, uint32_t *laddr, uint16_t *lp, 560 uint32_t *faddr, uint16_t *fp); 561 int inp_so_options(const struct inpcb *inp); 562 563 #endif /* _KERNEL */ 564 565 #define INP_INFO_WLOCK(ipi) mtx_lock(&(ipi)->ipi_lock) 566 #define INP_INFO_WLOCKED(ipi) mtx_owned(&(ipi)->ipi_lock) 567 #define INP_INFO_WUNLOCK(ipi) mtx_unlock(&(ipi)->ipi_lock) 568 #define INP_INFO_LOCK_ASSERT(ipi) MPASS(SMR_ENTERED((ipi)->ipi_smr) || \ 569 mtx_owned(&(ipi)->ipi_lock)) 570 #define INP_INFO_WLOCK_ASSERT(ipi) mtx_assert(&(ipi)->ipi_lock, MA_OWNED) 571 #define INP_INFO_WUNLOCK_ASSERT(ipi) \ 572 mtx_assert(&(ipi)->ipi_lock, MA_NOTOWNED) 573 574 #define INP_HASH_WLOCK(ipi) mtx_lock(&(ipi)->ipi_hash_lock) 575 #define INP_HASH_WUNLOCK(ipi) mtx_unlock(&(ipi)->ipi_hash_lock) 576 #define INP_HASH_LOCK_ASSERT(ipi) MPASS(SMR_ENTERED((ipi)->ipi_smr) || \ 577 mtx_owned(&(ipi)->ipi_hash_lock)) 578 #define INP_HASH_WLOCK_ASSERT(ipi) mtx_assert(&(ipi)->ipi_hash_lock, \ 579 MA_OWNED) 580 581 /* 582 * Wildcard matching hash is not just a microoptimisation! The hash for 583 * wildcard IPv4 and wildcard IPv6 must be the same, otherwise AF_INET6 584 * wildcard bound pcb won't be able to receive AF_INET connections, while: 585 * jenkins_hash(&zeroes, 1, s) != jenkins_hash(&zeroes, 4, s) 586 * See also comment above struct in_addr_4in6. 587 */ 588 #define IN_ADDR_JHASH32(addr) \ 589 ((addr)->s_addr == INADDR_ANY ? V_in_pcbhashseed : \ 590 jenkins_hash32((&(addr)->s_addr), 1, V_in_pcbhashseed)) 591 #define IN6_ADDR_JHASH32(addr) \ 592 (memcmp((addr), &in6addr_any, sizeof(in6addr_any)) == 0 ? \ 593 V_in_pcbhashseed : \ 594 jenkins_hash32((addr)->__u6_addr.__u6_addr32, \ 595 nitems((addr)->__u6_addr.__u6_addr32), V_in_pcbhashseed)) 596 597 #define INP_PCBHASH(faddr, lport, fport, mask) \ 598 ((IN_ADDR_JHASH32(faddr) ^ ntohs((lport) ^ (fport))) & (mask)) 599 #define INP6_PCBHASH(faddr, lport, fport, mask) \ 600 ((IN6_ADDR_JHASH32(faddr) ^ ntohs((lport) ^ (fport))) & (mask)) 601 602 #define INP_PCBHASH_WILD(lport, mask) \ 603 ((V_in_pcbhashseed ^ ntohs(lport)) & (mask)) 604 605 #define INP_PCBLBGROUP_PKTHASH(faddr, lport, fport) \ 606 (IN_ADDR_JHASH32(faddr) ^ ntohs((lport) ^ (fport))) 607 #define INP6_PCBLBGROUP_PKTHASH(faddr, lport, fport) \ 608 (IN6_ADDR_JHASH32(faddr) ^ ntohs((lport) ^ (fport))) 609 610 #define INP_PCBPORTHASH(lport, mask) (ntohs((lport)) & (mask)) 611 612 /* 613 * Flags for inp_vflags -- historically version flags only 614 */ 615 #define INP_IPV4 0x1 616 #define INP_IPV6 0x2 617 #define INP_IPV6PROTO 0x4 /* opened under IPv6 protocol */ 618 619 /* 620 * Flags for inp_flags. 621 */ 622 #define INP_RECVOPTS 0x00000001 /* receive incoming IP options */ 623 #define INP_RECVRETOPTS 0x00000002 /* receive IP options for reply */ 624 #define INP_RECVDSTADDR 0x00000004 /* receive IP dst address */ 625 #define INP_HDRINCL 0x00000008 /* user supplies entire IP header */ 626 #define INP_HIGHPORT 0x00000010 /* user wants "high" port binding */ 627 #define INP_LOWPORT 0x00000020 /* user wants "low" port binding */ 628 #define INP_ANONPORT 0x00000040 /* read by netstat(1) */ 629 #define INP_RECVIF 0x00000080 /* receive incoming interface */ 630 #define INP_MTUDISC 0x00000100 /* user can do MTU discovery */ 631 /* INP_FREED 0x00000200 private to in_pcb.c */ 632 #define INP_RECVTTL 0x00000400 /* receive incoming IP TTL */ 633 #define INP_DONTFRAG 0x00000800 /* don't fragment packet */ 634 #define INP_BINDANY 0x00001000 /* allow bind to any address */ 635 #define INP_INHASHLIST 0x00002000 /* in_pcbinshash() has been called */ 636 #define INP_RECVTOS 0x00004000 /* receive incoming IP TOS */ 637 #define IN6P_IPV6_V6ONLY 0x00008000 /* restrict AF_INET6 socket for v6 */ 638 #define IN6P_PKTINFO 0x00010000 /* receive IP6 dst and I/F */ 639 #define IN6P_HOPLIMIT 0x00020000 /* receive hoplimit */ 640 #define IN6P_HOPOPTS 0x00040000 /* receive hop-by-hop options */ 641 #define IN6P_DSTOPTS 0x00080000 /* receive dst options after rthdr */ 642 #define IN6P_RTHDR 0x00100000 /* receive routing header */ 643 #define IN6P_RTHDRDSTOPTS 0x00200000 /* receive dstoptions before rthdr */ 644 #define IN6P_TCLASS 0x00400000 /* receive traffic class value */ 645 #define IN6P_AUTOFLOWLABEL 0x00800000 /* attach flowlabel automatically */ 646 /* was INP_TIMEWAIT 0x01000000 */ 647 #define INP_ONESBCAST 0x02000000 /* send all-ones broadcast */ 648 #define INP_DROPPED 0x04000000 /* protocol drop flag */ 649 #define INP_SOCKREF 0x08000000 /* strong socket reference */ 650 #define INP_RESERVED_0 0x10000000 /* reserved field */ 651 #define INP_RESERVED_1 0x20000000 /* reserved field */ 652 #define IN6P_RFC2292 0x40000000 /* used RFC2292 API on the socket */ 653 #define IN6P_MTU 0x80000000 /* receive path MTU */ 654 655 #define INP_CONTROLOPTS (INP_RECVOPTS|INP_RECVRETOPTS|INP_RECVDSTADDR|\ 656 INP_RECVIF|INP_RECVTTL|INP_RECVTOS|\ 657 IN6P_PKTINFO|IN6P_HOPLIMIT|IN6P_HOPOPTS|\ 658 IN6P_DSTOPTS|IN6P_RTHDR|IN6P_RTHDRDSTOPTS|\ 659 IN6P_TCLASS|IN6P_AUTOFLOWLABEL|IN6P_RFC2292|\ 660 IN6P_MTU) 661 662 /* 663 * Flags for inp_flags2. 664 */ 665 #define INP_MBUF_L_ACKS 0x00000001 /* We need large mbufs for ack compression */ 666 #define INP_MBUF_ACKCMP 0x00000002 /* TCP mbuf ack compression ok */ 667 /* 0x00000004 */ 668 #define INP_REUSEPORT 0x00000008 /* SO_REUSEPORT option is set */ 669 /* 0x00000010 */ 670 #define INP_REUSEADDR 0x00000020 /* SO_REUSEADDR option is set */ 671 /* 0x00000040 */ 672 /* 0x00000080 */ 673 #define INP_RECVFLOWID 0x00000100 /* populate recv datagram with flow info */ 674 #define INP_RECVRSSBUCKETID 0x00000200 /* populate recv datagram with bucket id */ 675 #define INP_RATE_LIMIT_CHANGED 0x00000400 /* rate limit needs attention */ 676 #define INP_ORIGDSTADDR 0x00000800 /* receive IP dst address/port */ 677 #define INP_CANNOT_DO_ECN 0x00001000 /* The stack does not do ECN */ 678 #define INP_REUSEPORT_LB 0x00002000 /* SO_REUSEPORT_LB option is set */ 679 #define INP_SUPPORTS_MBUFQ 0x00004000 /* Supports the mbuf queue method of LRO */ 680 #define INP_MBUF_QUEUE_READY 0x00008000 /* The transport is pacing, inputs can be queued */ 681 #define INP_DONT_SACK_QUEUE 0x00010000 /* If a sack arrives do not wake me */ 682 #define INP_2PCP_SET 0x00020000 /* If the Eth PCP should be set explicitly */ 683 #define INP_2PCP_BIT0 0x00040000 /* Eth PCP Bit 0 */ 684 #define INP_2PCP_BIT1 0x00080000 /* Eth PCP Bit 1 */ 685 #define INP_2PCP_BIT2 0x00100000 /* Eth PCP Bit 2 */ 686 #define INP_2PCP_BASE INP_2PCP_BIT0 687 #define INP_2PCP_MASK (INP_2PCP_BIT0 | INP_2PCP_BIT1 | INP_2PCP_BIT2) 688 #define INP_2PCP_SHIFT 18 /* shift PCP field in/out of inp_flags2 */ 689 690 /* 691 * Flags passed to in_pcblookup*(), inp_smr_lock() and inp_next(). 692 */ 693 typedef enum { 694 INPLOOKUP_WILDCARD = 0x00000001, /* Allow wildcard sockets. */ 695 INPLOOKUP_RLOCKPCB = 0x00000002, /* Return inpcb read-locked. */ 696 INPLOOKUP_WLOCKPCB = 0x00000004, /* Return inpcb write-locked. */ 697 } inp_lookup_t; 698 699 #define INPLOOKUP_MASK (INPLOOKUP_WILDCARD | INPLOOKUP_RLOCKPCB | \ 700 INPLOOKUP_WLOCKPCB) 701 #define INPLOOKUP_LOCKMASK (INPLOOKUP_RLOCKPCB | INPLOOKUP_WLOCKPCB) 702 703 #define sotoinpcb(so) ((struct inpcb *)(so)->so_pcb) 704 705 #define INP_SOCKAF(so) so->so_proto->pr_domain->dom_family 706 707 #define INP_CHECK_SOCKAF(so, af) (INP_SOCKAF(so) == af) 708 709 #ifdef _KERNEL 710 VNET_DECLARE(int, ipport_reservedhigh); 711 VNET_DECLARE(int, ipport_reservedlow); 712 VNET_DECLARE(int, ipport_lowfirstauto); 713 VNET_DECLARE(int, ipport_lowlastauto); 714 VNET_DECLARE(int, ipport_firstauto); 715 VNET_DECLARE(int, ipport_lastauto); 716 VNET_DECLARE(int, ipport_hifirstauto); 717 VNET_DECLARE(int, ipport_hilastauto); 718 VNET_DECLARE(int, ipport_randomized); 719 720 #define V_ipport_reservedhigh VNET(ipport_reservedhigh) 721 #define V_ipport_reservedlow VNET(ipport_reservedlow) 722 #define V_ipport_lowfirstauto VNET(ipport_lowfirstauto) 723 #define V_ipport_lowlastauto VNET(ipport_lowlastauto) 724 #define V_ipport_firstauto VNET(ipport_firstauto) 725 #define V_ipport_lastauto VNET(ipport_lastauto) 726 #define V_ipport_hifirstauto VNET(ipport_hifirstauto) 727 #define V_ipport_hilastauto VNET(ipport_hilastauto) 728 #define V_ipport_randomized VNET(ipport_randomized) 729 730 void in_pcbinfo_init(struct inpcbinfo *, struct inpcbstorage *, 731 u_int, u_int); 732 void in_pcbinfo_destroy(struct inpcbinfo *); 733 void in_pcbstorage_init(void *); 734 void in_pcbstorage_destroy(void *); 735 736 void in_pcbpurgeif0(struct inpcbinfo *, struct ifnet *); 737 int in_pcballoc(struct socket *, struct inpcbinfo *); 738 int in_pcbbind(struct inpcb *, struct sockaddr_in *, struct ucred *); 739 int in_pcbbind_setup(struct inpcb *, struct sockaddr_in *, in_addr_t *, 740 u_short *, struct ucred *); 741 int in_pcbconnect(struct inpcb *, struct sockaddr_in *, struct ucred *, 742 bool); 743 int in_pcbconnect_setup(struct inpcb *, struct sockaddr_in *, in_addr_t *, 744 u_short *, in_addr_t *, u_short *, struct ucred *); 745 void in_pcbdetach(struct inpcb *); 746 void in_pcbdisconnect(struct inpcb *); 747 void in_pcbdrop(struct inpcb *); 748 void in_pcbfree(struct inpcb *); 749 int in_pcbinshash(struct inpcb *); 750 int in_pcbladdr(struct inpcb *, struct in_addr *, struct in_addr *, 751 struct ucred *); 752 int in_pcblbgroup_numa(struct inpcb *, int arg); 753 struct inpcb * 754 in_pcblookup(struct inpcbinfo *, struct in_addr, u_int, 755 struct in_addr, u_int, int, struct ifnet *); 756 struct inpcb * 757 in_pcblookup_mbuf(struct inpcbinfo *, struct in_addr, u_int, 758 struct in_addr, u_int, int, struct ifnet *, struct mbuf *); 759 void in_pcbnotifyall(struct inpcbinfo *pcbinfo, struct in_addr, 760 int, struct inpcb *(*)(struct inpcb *, int)); 761 void in_pcbref(struct inpcb *); 762 void in_pcbrehash(struct inpcb *); 763 bool in_pcbrele_rlocked(struct inpcb *); 764 bool in_pcbrele_wlocked(struct inpcb *); 765 766 typedef bool inp_match_t(const struct inpcb *, void *); 767 struct inpcb_iterator { 768 const struct inpcbinfo *ipi; 769 struct inpcb *inp; 770 inp_match_t *match; 771 void *ctx; 772 int hash; 773 #define INP_ALL_LIST -1 774 const inp_lookup_t lock; 775 }; 776 777 /* Note: sparse initializers guarantee .inp = NULL. */ 778 #define INP_ITERATOR(_ipi, _lock, _match, _ctx) \ 779 { \ 780 .ipi = (_ipi), \ 781 .lock = (_lock), \ 782 .hash = INP_ALL_LIST, \ 783 .match = (_match), \ 784 .ctx = (_ctx), \ 785 } 786 #define INP_ALL_ITERATOR(_ipi, _lock) \ 787 { \ 788 .ipi = (_ipi), \ 789 .lock = (_lock), \ 790 .hash = INP_ALL_LIST, \ 791 } 792 793 struct inpcb *inp_next(struct inpcb_iterator *); 794 void in_losing(struct inpcb *); 795 void in_pcbsetsolabel(struct socket *so); 796 int in_getpeeraddr(struct socket *so, struct sockaddr **nam); 797 int in_getsockaddr(struct socket *so, struct sockaddr **nam); 798 struct sockaddr * 799 in_sockaddr(in_port_t port, struct in_addr *addr); 800 void in_pcbsosetlabel(struct socket *so); 801 #ifdef RATELIMIT 802 int 803 in_pcboutput_txrtlmt_locked(struct inpcb *, struct ifnet *, 804 struct mbuf *, uint32_t); 805 int in_pcbattach_txrtlmt(struct inpcb *, struct ifnet *, uint32_t, uint32_t, 806 uint32_t, struct m_snd_tag **); 807 void in_pcbdetach_txrtlmt(struct inpcb *); 808 void in_pcbdetach_tag(struct m_snd_tag *); 809 int in_pcbmodify_txrtlmt(struct inpcb *, uint32_t); 810 int in_pcbquery_txrtlmt(struct inpcb *, uint32_t *); 811 int in_pcbquery_txrlevel(struct inpcb *, uint32_t *); 812 void in_pcboutput_txrtlmt(struct inpcb *, struct ifnet *, struct mbuf *); 813 void in_pcboutput_eagain(struct inpcb *); 814 #endif 815 #endif /* _KERNEL */ 816 817 #endif /* !_NETINET_IN_PCB_H_ */ 818