xref: /freebsd/sys/netinet/sctp_os_bsd.h (revision b0b1dbdd)
1 /*-
2  * Copyright (c) 2006-2007, by Cisco Systems, Inc. All rights reserved.
3  * Copyright (c) 2008-2012, by Randall Stewart. All rights reserved.
4  * Copyright (c) 2008-2012, by Michael Tuexen. All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions are met:
8  *
9  * a) Redistributions of source code must retain the above copyright notice,
10  *   this list of conditions and the following disclaimer.
11  *
12  * b) Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in
14  *   the documentation and/or other materials provided with the distribution.
15  *
16  * c) Neither the name of Cisco Systems, Inc. nor the names of its
17  *    contributors may be used to endorse or promote products derived
18  *    from this software without specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
22  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
24  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30  * THE POSSIBILITY OF SUCH DAMAGE.
31  */
32 
33 #include <sys/cdefs.h>
34 __FBSDID("$FreeBSD$");
35 
36 #ifndef _NETINET_SCTP_OS_BSD_H_
37 #define _NETINET_SCTP_OS_BSD_H_
38 /*
39  * includes
40  */
41 #include "opt_compat.h"
42 #include "opt_inet6.h"
43 #include "opt_inet.h"
44 #include "opt_sctp.h"
45 
46 #include <sys/param.h>
47 #include <sys/ktr.h>
48 #include <sys/systm.h>
49 #include <sys/malloc.h>
50 #include <sys/kernel.h>
51 #include <sys/sysctl.h>
52 #include <sys/mbuf.h>
53 #include <sys/protosw.h>
54 #include <sys/socket.h>
55 #include <sys/socketvar.h>
56 #include <sys/jail.h>
57 #include <sys/sysctl.h>
58 #include <sys/resourcevar.h>
59 #include <sys/uio.h>
60 #include <sys/lock.h>
61 #include <sys/rwlock.h>
62 #include <sys/kthread.h>
63 #include <sys/priv.h>
64 #include <sys/random.h>
65 #include <sys/limits.h>
66 #include <sys/queue.h>
67 #include <machine/cpu.h>
68 
69 #include <net/if.h>
70 #include <net/if_types.h>
71 #include <net/if_var.h>
72 #include <net/route.h>
73 #include <net/vnet.h>
74 
75 #include <netinet/in.h>
76 #include <netinet/in_systm.h>
77 #include <netinet/ip.h>
78 #include <netinet/in_pcb.h>
79 #include <netinet/in_var.h>
80 #include <netinet/ip_var.h>
81 #include <netinet/ip_icmp.h>
82 #include <netinet/icmp_var.h>
83 
84 #ifdef INET6
85 #include <sys/domain.h>
86 #include <netinet/ip6.h>
87 #include <netinet6/ip6_var.h>
88 #include <netinet6/in6_pcb.h>
89 #include <netinet6/ip6protosw.h>
90 #include <netinet6/nd6.h>
91 #include <netinet6/scope6_var.h>
92 #endif				/* INET6 */
93 
94 #include <netinet/ip_options.h>
95 
96 #include <crypto/sha1.h>
97 #include <crypto/sha2/sha256.h>
98 
99 #ifndef in6pcb
100 #define in6pcb		inpcb
101 #endif
102 /* Declare all the malloc names for all the various mallocs */
103 MALLOC_DECLARE(SCTP_M_MAP);
104 MALLOC_DECLARE(SCTP_M_STRMI);
105 MALLOC_DECLARE(SCTP_M_STRMO);
106 MALLOC_DECLARE(SCTP_M_ASC_ADDR);
107 MALLOC_DECLARE(SCTP_M_ASC_IT);
108 MALLOC_DECLARE(SCTP_M_AUTH_CL);
109 MALLOC_DECLARE(SCTP_M_AUTH_KY);
110 MALLOC_DECLARE(SCTP_M_AUTH_HL);
111 MALLOC_DECLARE(SCTP_M_AUTH_IF);
112 MALLOC_DECLARE(SCTP_M_STRESET);
113 MALLOC_DECLARE(SCTP_M_CMSG);
114 MALLOC_DECLARE(SCTP_M_COPYAL);
115 MALLOC_DECLARE(SCTP_M_VRF);
116 MALLOC_DECLARE(SCTP_M_IFA);
117 MALLOC_DECLARE(SCTP_M_IFN);
118 MALLOC_DECLARE(SCTP_M_TIMW);
119 MALLOC_DECLARE(SCTP_M_MVRF);
120 MALLOC_DECLARE(SCTP_M_ITER);
121 MALLOC_DECLARE(SCTP_M_SOCKOPT);
122 MALLOC_DECLARE(SCTP_M_MCORE);
123 
124 #if defined(SCTP_LOCAL_TRACE_BUF)
125 
126 #define SCTP_GET_CYCLECOUNT get_cyclecount()
127 #define SCTP_CTR6 sctp_log_trace
128 
129 #else
130 #define SCTP_CTR6 CTR6
131 #endif
132 
133 /*
134  * Macros to expand out globals defined by various modules
135  * to either a real global or a virtualized instance of one,
136  * depending on whether VIMAGE is defined.
137  */
138 /* then define the macro(s) that hook into the vimage macros */
139 #define MODULE_GLOBAL(__SYMBOL) V_##__SYMBOL
140 
141 #define V_system_base_info VNET(system_base_info)
142 #define SCTP_BASE_INFO(__m) V_system_base_info.sctppcbinfo.__m
143 #define SCTP_BASE_STATS V_system_base_info.sctpstat
144 #define SCTP_BASE_STAT(__m) V_system_base_info.sctpstat.__m
145 #define SCTP_BASE_SYSCTL(__m) V_system_base_info.sctpsysctl.__m
146 #define SCTP_BASE_VAR(__m) V_system_base_info.__m
147 
148 #define SCTP_PRINTF(params...)	printf(params)
149 #if defined(SCTP_DEBUG)
150 #define SCTPDBG(level, params...)					\
151 {									\
152 	do {								\
153 		if (SCTP_BASE_SYSCTL(sctp_debug_on) & level ) {		\
154 			SCTP_PRINTF(params);				\
155 		}							\
156 	} while (0);							\
157 }
158 #define SCTPDBG_ADDR(level, addr)					\
159 {									\
160 	do {								\
161 		if (SCTP_BASE_SYSCTL(sctp_debug_on) & level ) {		\
162 			sctp_print_address(addr);			\
163 		}							\
164 	} while (0);							\
165 }
166 #else
167 #define SCTPDBG(level, params...)
168 #define SCTPDBG_ADDR(level, addr)
169 #endif
170 
171 #ifdef SCTP_LTRACE_CHUNKS
172 #define SCTP_LTRACE_CHK(a, b, c, d) if(SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LTRACE_CHUNK_ENABLE) SCTP_CTR6(KTR_SUBSYS, "SCTP:%d[%d]:%x-%x-%x-%x", SCTP_LOG_CHUNK_PROC, 0, a, b, c, d)
173 #else
174 #define SCTP_LTRACE_CHK(a, b, c, d)
175 #endif
176 
177 #ifdef SCTP_LTRACE_ERRORS
178 #define SCTP_LTRACE_ERR_RET_PKT(m, inp, stcb, net, file, err) \
179 	if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LTRACE_ERROR_ENABLE) \
180 		SCTP_PRINTF("mbuf:%p inp:%p stcb:%p net:%p file:%x line:%d error:%d\n", \
181 		            m, inp, stcb, net, file, __LINE__, err);
182 #define SCTP_LTRACE_ERR_RET(inp, stcb, net, file, err) \
183 	if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LTRACE_ERROR_ENABLE) \
184 		SCTP_PRINTF("inp:%p stcb:%p net:%p file:%x line:%d error:%d\n", \
185 		            inp, stcb, net, file, __LINE__, err);
186 #else
187 #define SCTP_LTRACE_ERR_RET_PKT(m, inp, stcb, net, file, err)
188 #define SCTP_LTRACE_ERR_RET(inp, stcb, net, file, err)
189 #endif
190 
191 
192 /*
193  * Local address and interface list handling
194  */
195 #define SCTP_MAX_VRF_ID		0
196 #define SCTP_SIZE_OF_VRF_HASH	3
197 #define SCTP_IFNAMSIZ		IFNAMSIZ
198 #define SCTP_DEFAULT_VRFID	0
199 #define SCTP_VRF_ADDR_HASH_SIZE	16
200 #define SCTP_VRF_IFN_HASH_SIZE	3
201 #define	SCTP_INIT_VRF_TABLEID(vrf)
202 
203 #define SCTP_IFN_IS_IFT_LOOP(ifn) ((ifn)->ifn_type == IFT_LOOP)
204 #define SCTP_ROUTE_IS_REAL_LOOP(ro) ((ro)->ro_rt && (ro)->ro_rt->rt_ifa && (ro)->ro_rt->rt_ifa->ifa_ifp && (ro)->ro_rt->rt_ifa->ifa_ifp->if_type == IFT_LOOP)
205 
206 /*
207  * Access to IFN's to help with src-addr-selection
208  */
209 /* This could return VOID if the index works but for BSD we provide both. */
210 #define SCTP_GET_IFN_VOID_FROM_ROUTE(ro) (void *)ro->ro_rt->rt_ifp
211 #define SCTP_GET_IF_INDEX_FROM_ROUTE(ro) (ro)->ro_rt->rt_ifp->if_index
212 #define SCTP_ROUTE_HAS_VALID_IFN(ro) ((ro)->ro_rt && (ro)->ro_rt->rt_ifp)
213 
214 /*
215  * general memory allocation
216  */
217 #define SCTP_MALLOC(var, type, size, name) \
218 	do { \
219 		var = (type)malloc(size, name, M_NOWAIT); \
220 	} while (0)
221 
222 #define SCTP_FREE(var, type)	free(var, type)
223 
224 #define SCTP_MALLOC_SONAME(var, type, size) \
225 	do { \
226 		var = (type)malloc(size, M_SONAME, M_WAITOK | M_ZERO); \
227 	} while (0)
228 
229 #define SCTP_FREE_SONAME(var)	free(var, M_SONAME)
230 
231 #define SCTP_PROCESS_STRUCT struct proc *
232 
233 /*
234  * zone allocation functions
235  */
236 #include <vm/uma.h>
237 
238 /* SCTP_ZONE_INIT: initialize the zone */
239 typedef struct uma_zone *sctp_zone_t;
240 #define SCTP_ZONE_INIT(zone, name, size, number) { \
241 	zone = uma_zcreate(name, size, NULL, NULL, NULL, NULL, UMA_ALIGN_PTR,\
242 		0); \
243 	uma_zone_set_max(zone, number); \
244 }
245 
246 #define SCTP_ZONE_DESTROY(zone) uma_zdestroy(zone)
247 
248 /* SCTP_ZONE_GET: allocate element from the zone */
249 #define SCTP_ZONE_GET(zone, type) \
250 	(type *)uma_zalloc(zone, M_NOWAIT);
251 
252 /* SCTP_ZONE_FREE: free element from the zone */
253 #define SCTP_ZONE_FREE(zone, element) \
254 	uma_zfree(zone, element);
255 
256 #define SCTP_HASH_INIT(size, hashmark) hashinit_flags(size, M_PCB, hashmark, HASH_NOWAIT)
257 #define SCTP_HASH_FREE(table, hashmark) hashdestroy(table, M_PCB, hashmark)
258 
259 #define SCTP_M_COPYM	m_copym
260 
261 /*
262  * timers
263  */
264 #include <sys/callout.h>
265 typedef struct callout sctp_os_timer_t;
266 
267 
268 #define SCTP_OS_TIMER_INIT(tmr)	callout_init(tmr, 1)
269 #define SCTP_OS_TIMER_START	callout_reset
270 #define SCTP_OS_TIMER_STOP	callout_stop
271 #define SCTP_OS_TIMER_STOP_DRAIN callout_drain
272 #define SCTP_OS_TIMER_PENDING	callout_pending
273 #define SCTP_OS_TIMER_ACTIVE	callout_active
274 #define SCTP_OS_TIMER_DEACTIVATE callout_deactivate
275 
276 #define sctp_get_tick_count() (ticks)
277 
278 #define SCTP_UNUSED __attribute__((unused))
279 
280 /*
281  * Functions
282  */
283 /* Mbuf manipulation and access macros  */
284 #define SCTP_BUF_LEN(m) (m->m_len)
285 #define SCTP_BUF_NEXT(m) (m->m_next)
286 #define SCTP_BUF_NEXT_PKT(m) (m->m_nextpkt)
287 #define SCTP_BUF_RESV_UF(m, size) m->m_data += size
288 #define SCTP_BUF_AT(m, size) m->m_data + size
289 #define SCTP_BUF_IS_EXTENDED(m) (m->m_flags & M_EXT)
290 #define SCTP_BUF_SIZE M_SIZE
291 #define SCTP_BUF_TYPE(m) (m->m_type)
292 #define SCTP_BUF_RECVIF(m) (m->m_pkthdr.rcvif)
293 #define SCTP_BUF_PREPEND	M_PREPEND
294 
295 #define SCTP_ALIGN_TO_END(m, len) M_ALIGN(m, len)
296 
297 /* We make it so if you have up to 4 threads
298  * writing based on the default size of
299  * the packet log 65 k, that would be
300  * 4 16k packets before we would hit
301  * a problem.
302  */
303 #define SCTP_PKTLOG_WRITERS_NEED_LOCK 3
304 
305 /*************************/
306 /*      MTU              */
307 /*************************/
308 #define SCTP_GATHER_MTU_FROM_IFN_INFO(ifn, ifn_index, af) ((struct ifnet *)ifn)->if_mtu
309 #define SCTP_GATHER_MTU_FROM_ROUTE(sctp_ifa, sa, rt) ((uint32_t)((rt != NULL) ? rt->rt_mtu : 0))
310 #define SCTP_GATHER_MTU_FROM_INTFC(sctp_ifn) ((sctp_ifn->ifn_p != NULL) ? ((struct ifnet *)(sctp_ifn->ifn_p))->if_mtu : 0)
311 #define SCTP_SET_MTU_OF_ROUTE(sa, rt, mtu) do { \
312                                               if (rt != NULL) \
313                                                  rt->rt_mtu = mtu; \
314                                            } while(0)
315 
316 /* (de-)register interface event notifications */
317 #define SCTP_REGISTER_INTERFACE(ifhandle, af)
318 #define SCTP_DEREGISTER_INTERFACE(ifhandle, af)
319 
320 
321 /*************************/
322 /* These are for logging */
323 /*************************/
324 /* return the base ext data pointer */
325 #define SCTP_BUF_EXTEND_BASE(m) (m->m_ext.ext_buf)
326  /* return the refcnt of the data pointer */
327 #define SCTP_BUF_EXTEND_REFCNT(m) (*m->m_ext.ext_cnt)
328 /* return any buffer related flags, this is
329  * used beyond logging for apple only.
330  */
331 #define SCTP_BUF_GET_FLAGS(m) (m->m_flags)
332 
333 /* For BSD this just accesses the M_PKTHDR length
334  * so it operates on an mbuf with hdr flag. Other
335  * O/S's may have separate packet header and mbuf
336  * chain pointers.. thus the macro.
337  */
338 #define SCTP_HEADER_TO_CHAIN(m) (m)
339 #define SCTP_DETACH_HEADER_FROM_CHAIN(m)
340 #define SCTP_HEADER_LEN(m) ((m)->m_pkthdr.len)
341 #define SCTP_GET_HEADER_FOR_OUTPUT(o_pak) 0
342 #define SCTP_RELEASE_HEADER(m)
343 #define SCTP_RELEASE_PKT(m)	sctp_m_freem(m)
344 #define SCTP_ENABLE_UDP_CSUM(m) do { \
345 					m->m_pkthdr.csum_flags = CSUM_UDP; \
346 					m->m_pkthdr.csum_data = offsetof(struct udphdr, uh_sum); \
347 				} while (0)
348 
349 #define SCTP_GET_PKT_VRFID(m, vrf_id)  ((vrf_id = SCTP_DEFAULT_VRFID) != SCTP_DEFAULT_VRFID)
350 
351 
352 
353 /* Attach the chain of data into the sendable packet. */
354 #define SCTP_ATTACH_CHAIN(pak, m, packet_length) do { \
355                                                  pak = m; \
356                                                  pak->m_pkthdr.len = packet_length; \
357                          } while(0)
358 
359 /* Other m_pkthdr type things */
360 #define SCTP_IS_IT_BROADCAST(dst, m) ((m->m_flags & M_PKTHDR) ? in_broadcast(dst, m->m_pkthdr.rcvif) : 0)
361 #define SCTP_IS_IT_LOOPBACK(m) ((m->m_flags & M_PKTHDR) && ((m->m_pkthdr.rcvif == NULL) || (m->m_pkthdr.rcvif->if_type == IFT_LOOP)))
362 
363 
364 /* This converts any input packet header
365  * into the chain of data holders, for BSD
366  * its a NOP.
367  */
368 
369 /* get the v6 hop limit */
370 #define SCTP_GET_HLIM(inp, ro)	in6_selecthlim((struct in6pcb *)&inp->ip_inp.inp, (ro ? (ro->ro_rt ? (ro->ro_rt->rt_ifp) : (NULL)) : (NULL)));
371 
372 /* is the endpoint v6only? */
373 #define SCTP_IPV6_V6ONLY(inp)	(((struct inpcb *)inp)->inp_flags & IN6P_IPV6_V6ONLY)
374 /* is the socket non-blocking? */
375 #define SCTP_SO_IS_NBIO(so)	((so)->so_state & SS_NBIO)
376 #define SCTP_SET_SO_NBIO(so)	((so)->so_state |= SS_NBIO)
377 #define SCTP_CLEAR_SO_NBIO(so)	((so)->so_state &= ~SS_NBIO)
378 /* get the socket type */
379 #define SCTP_SO_TYPE(so)	((so)->so_type)
380 /* Use a macro for renaming sb_cc to sb_acc.
381  * Initially sb_ccc was used, but this broke select() when used
382  * with SCTP sockets.
383  */
384 #define sb_cc sb_acc
385 /* reserve sb space for a socket */
386 #define SCTP_SORESERVE(so, send, recv)	soreserve(so, send, recv)
387 /* wakeup a socket */
388 #define SCTP_SOWAKEUP(so)	wakeup(&(so)->so_timeo)
389 /* clear the socket buffer state */
390 #define SCTP_SB_CLEAR(sb)	\
391 	(sb).sb_cc = 0;		\
392 	(sb).sb_mb = NULL;	\
393 	(sb).sb_mbcnt = 0;
394 
395 #define SCTP_SB_LIMIT_RCV(so) so->so_rcv.sb_hiwat
396 #define SCTP_SB_LIMIT_SND(so) so->so_snd.sb_hiwat
397 
398 /*
399  * routes, output, etc.
400  */
401 typedef struct route sctp_route_t;
402 typedef struct rtentry sctp_rtentry_t;
403 
404 #define SCTP_RTALLOC(ro, vrf_id, fibnum) \
405 	rtalloc_ign_fib((struct route *)ro, 0UL, fibnum)
406 
407 /* Future zero copy wakeup/send  function */
408 #define SCTP_ZERO_COPY_EVENT(inp, so)
409 /* This is re-pulse ourselves for sendbuf */
410 #define SCTP_ZERO_COPY_SENDQ_EVENT(inp, so)
411 
412 /*
413  * SCTP protocol specific mbuf flags.
414  */
415 #define	M_NOTIFICATION		M_PROTO1	/* SCTP notification */
416 
417 /*
418  * IP output routines
419  */
420 #define SCTP_IP_OUTPUT(result, o_pak, ro, stcb, vrf_id) \
421 { \
422 	int o_flgs = IP_RAWOUTPUT; \
423 	struct sctp_tcb *local_stcb = stcb; \
424 	if (local_stcb && \
425 	    local_stcb->sctp_ep && \
426 	    local_stcb->sctp_ep->sctp_socket) \
427 		o_flgs |= local_stcb->sctp_ep->sctp_socket->so_options & SO_DONTROUTE; \
428 	m_clrprotoflags(o_pak); \
429 	result = ip_output(o_pak, NULL, ro, o_flgs, 0, NULL); \
430 }
431 
432 #define SCTP_IP6_OUTPUT(result, o_pak, ro, ifp, stcb, vrf_id) \
433 { \
434 	struct sctp_tcb *local_stcb = stcb; \
435 	m_clrprotoflags(o_pak); \
436 	if (local_stcb && local_stcb->sctp_ep) \
437 		result = ip6_output(o_pak, \
438 				    ((struct in6pcb *)(local_stcb->sctp_ep))->in6p_outputopts, \
439 				    (ro), 0, 0, ifp, NULL); \
440 	else \
441 		result = ip6_output(o_pak, NULL, (ro), 0, 0, ifp, NULL); \
442 }
443 
444 struct mbuf *
445 sctp_get_mbuf_for_msg(unsigned int space_needed,
446     int want_header, int how, int allonebuf, int type);
447 
448 
449 /*
450  * SCTP AUTH
451  */
452 #define SCTP_READ_RANDOM(buf, len)	read_random(buf, len)
453 
454 /* map standard crypto API names */
455 #define SCTP_SHA1_CTX		SHA1_CTX
456 #define SCTP_SHA1_INIT		SHA1Init
457 #define SCTP_SHA1_UPDATE	SHA1Update
458 #define SCTP_SHA1_FINAL(x,y)	SHA1Final((caddr_t)x, y)
459 
460 #define SCTP_SHA256_CTX		SHA256_CTX
461 #define SCTP_SHA256_INIT	SHA256_Init
462 #define SCTP_SHA256_UPDATE	SHA256_Update
463 #define SCTP_SHA256_FINAL(x,y)	SHA256_Final((caddr_t)x, y)
464 
465 #endif
466 
467 #define SCTP_DECREMENT_AND_CHECK_REFCOUNT(addr) (atomic_fetchadd_int(addr, -1) == 1)
468 #if defined(INVARIANTS)
469 #define SCTP_SAVE_ATOMIC_DECREMENT(addr, val) \
470 { \
471 	int32_t oldval; \
472 	oldval = atomic_fetchadd_int(addr, -val); \
473 	if (oldval < val) { \
474 		panic("Counter goes negative"); \
475 	} \
476 }
477 #else
478 #define SCTP_SAVE_ATOMIC_DECREMENT(addr, val) \
479 { \
480 	int32_t oldval; \
481 	oldval = atomic_fetchadd_int(addr, -val); \
482 	if (oldval < val) { \
483 		*addr = 0; \
484 	} \
485 }
486 #endif
487