xref: /freebsd/sys/powerpc/conf/GENERIC64 (revision 61e21613)
1#
2# GENERIC64 -- Generic kernel configuration file for FreeBSD/powerpc64
3#
4# For more information on this file, please read the handbook section on
5# Kernel Configuration Files:
6#
7#    https://docs.freebsd.org/en/books/handbook/kernelconfig/#kernelconfig-config
8#
9# The handbook is also available locally in /usr/share/doc/handbook
10# if you've installed the doc distribution, otherwise always see the
11# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the
12# latest information.
13#
14# An exhaustive list of options and more detailed explanations of the
15# device lines is also present in the ../../conf/NOTES and NOTES files.
16# If you are in doubt as to the purpose or necessity of a line, check first
17# in NOTES.
18#
19
20cpu		AIM
21ident		GENERIC
22
23machine 	powerpc	powerpc64
24
25makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols
26makeoptions	WITH_CTF=1
27
28# Platform support
29options 	POWERMAC		# NewWorld Apple PowerMacs
30options 	PS3			# Sony Playstation 3
31options 	MAMBO			# IBM Mambo Full System Simulator
32options 	QEMU			# QEMU processor emulator
33options 	PSERIES			# PAPR-compliant systems (e.g. IBM p)
34options 	POWERNV			# Non-virtualized OpenPOWER systems
35
36options 	FDT			# Flattened Device Tree
37options 	SCHED_ULE		# ULE scheduler
38options 	NUMA			# Non-Uniform Memory Architecture support
39options 	PREEMPTION		# Enable kernel thread preemption
40options 	VIMAGE			# Subsystem virtualization, e.g. VNET
41options 	INET			# InterNETworking
42options 	INET6			# IPv6 communications protocols
43options 	IPSEC_SUPPORT		# Allow kldload of ipsec and tcpmd5
44options 	ROUTE_MPATH		# Multipath routing support
45options 	TCP_OFFLOAD		# TCP offload
46options 	TCP_BLACKBOX		# Enhanced TCP event logging
47options 	TCP_HHOOK		# hhook(9) framework for TCP
48options 	TCP_RFC7413		# TCP Fast Open
49options 	SCTP_SUPPORT		# Allow kldload of SCTP
50options		KERN_TLS		# TLS transmit & receive offload
51options 	FFS			# Berkeley Fast Filesystem
52options 	SOFTUPDATES		# Enable FFS soft updates support
53options 	UFS_ACL			# Support for access control lists
54options 	UFS_DIRHASH		# Improve performance on big directories
55options 	UFS_GJOURNAL		# Enable gjournal-based UFS journaling
56options 	QUOTA			# Enable disk quotas for UFS
57options 	MD_ROOT			# MD is a potential root device
58options 	MD_ROOT_MEM		# Enable use of initrd as MD root
59options 	NFSCL			# Network Filesystem Client
60options 	NFSD			# Network Filesystem Server
61options 	NFSLOCKD		# Network Lock Manager
62options 	NFS_ROOT		# NFS usable as root device
63options 	MSDOSFS			# MSDOS Filesystem
64options 	CD9660			# ISO 9660 Filesystem
65options 	PROCFS			# Process filesystem (requires PSEUDOFS)
66options 	PSEUDOFS		# Pseudo-filesystem framework
67options 	TMPFS			# Efficient memory filesystem
68options 	GEOM_PART_APM		# Apple Partition Maps.
69options 	GEOM_PART_GPT		# GUID Partition Tables.
70options 	GEOM_LABEL		# Provides labelization
71options 	COMPAT_FREEBSD32	# Compatible with FreeBSD/powerpc binaries
72options 	COMPAT_FREEBSD6		# Compatible with FreeBSD6
73options 	COMPAT_FREEBSD7		# Compatible with FreeBSD7
74options 	COMPAT_FREEBSD9		# Compatible with FreeBSD9
75options 	COMPAT_FREEBSD10	# Compatible with FreeBSD10
76options 	COMPAT_FREEBSD11	# Compatible with FreeBSD11
77options 	COMPAT_FREEBSD12	# Compatible with FreeBSD12
78options 	COMPAT_FREEBSD13	# Compatible with FreeBSD13
79options 	COMPAT_FREEBSD14	# Compatible with FreeBSD14
80options 	SCSI_DELAY=5000		# Delay (in ms) before probing SCSI
81options 	KTRACE			# ktrace(1) syscall trace support
82options 	STACK			# stack(9) support
83options 	SYSVSHM			# SYSV-style shared memory
84options 	SYSVMSG			# SYSV-style message queues
85options 	SYSVSEM			# SYSV-style semaphores
86options 	_KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions
87options 	PRINTF_BUFR_SIZE=128	# Prevent printf output being interspersed.
88options 	HWPMC_HOOKS		# Necessary kernel hooks for hwpmc(4)
89options 	AUDIT			# Security event auditing
90options 	CAPABILITY_MODE		# Capsicum capability mode
91options 	CAPABILITIES		# Capsicum capabilities
92options 	MAC			# TrustedBSD MAC Framework
93options 	KDTRACE_HOOKS		# Kernel DTrace hooks
94options 	DDB_CTF			# Kernel ELF linker loads CTF data
95options 	INCLUDE_CONFIG_FILE     # Include this file in kernel
96options 	RACCT			# Resource accounting framework
97options 	RACCT_DEFAULT_TO_DISABLED # Set kern.racct.enable=0 by default
98options 	RCTL			# Resource limits
99
100# Debugging support.  Always need this:
101options 	KDB			# Enable kernel debugger support.
102options 	KDB_TRACE		# Print a stack trace for a panic.
103# For full debugger support use (turn off in stable branch):
104options 	DDB			# Support DDB
105#options 	DEADLKRES		# Enable the deadlock resolver
106options 	INVARIANTS		# Enable calls of extra sanity checking
107options 	INVARIANT_SUPPORT	# Extra sanity checks of internal structures, required by INVARIANTS
108options 	WITNESS			# Enable checks to detect deadlocks and cycles
109options 	WITNESS_SKIPSPIN	# Don't run witness on spinlocks for speed
110options 	MALLOC_DEBUG_MAXZONES=8	# Separate malloc(9) zones
111options 	VERBOSE_SYSINIT=0	# Support debug.verbose_sysinit, off by default
112
113# Kernel dump features.
114options 	EKCD			# Support for encrypted kernel dumps
115options 	GZIO			# gzip-compressed kernel and user dumps
116options 	ZSTDIO			# zstd-compressed kernel and user dumps
117options 	DEBUGNET		# debugnet networking
118options 	NETDUMP			# netdump(4) client support
119
120# Make an SMP-capable kernel by default
121options 	SMP			# Symmetric MultiProcessor Kernel
122
123# CPU frequency control
124device		cpufreq
125
126# Standard busses
127device		pci
128options 	PCI_HP			# PCI-Express native HotPlug
129device		agp
130
131options		COMPAT_LINUXKPI
132
133# ATA controllers
134device		ahci		# AHCI-compatible SATA controllers
135device		ata		# Legacy ATA/SATA controllers
136device		mvs		# Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA
137device		siis		# SiliconImage SiI3124/SiI3132/SiI3531 SATA
138
139# NVM Express (NVMe) support
140device		nvme		# base NVMe driver
141options 	NVME_USE_NVD=0	# prefer the cam(4) based nda(4) driver
142device		nvd		# expose NVMe namespaces as disks, depends on nvme
143
144# SCSI Controllers
145device		aacraid		# Adaptec by PMC RAID
146device		ahc		# AHA2940 and onboard AIC7xxx devices
147options 	AHC_ALLOW_MEMIO	# Attempt to use memory mapped I/O
148device		isp		# Qlogic family
149device		ispfw		# Firmware module for Qlogic host adapters
150device		mrsas		# LSI/Avago MegaRAID SAS/SATA, 6Gb/s and 12Gb/s
151device		mpt		# LSI-Logic MPT-Fusion
152device		mps		# LSI-Logic MPT-Fusion 2
153device		mpr		# LSI SAS3008 MPT-Fusion SAS-3
154device		sym		# NCR/Symbios/LSI Logic 53C8XX/53C1010/53C1510D
155
156# ATA/SCSI peripherals
157device		scbus		# SCSI bus (required for ATA/SCSI)
158device		ch		# SCSI media changers
159device		da		# Direct Access (disks)
160device		sa		# Sequential Access (tape etc)
161device		cd		# CD
162device		pass		# Passthrough device (direct ATA/SCSI access)
163device		ses		# Enclosure Service (SES and SAF-TE)
164
165# vt is the default console driver, resembling an SCO console
166device		vt		# Core console driver
167device		kbdmux
168
169# Serial (COM) ports
170device		scc
171device		uart
172device		uart_z8530
173
174device		iflib
175
176# Ethernet hardware
177device		em		# Intel PRO/1000 Gigabit Ethernet Family
178device		ix		# Intel PRO/10GbE PCIE PF Ethernet Family
179device		ixl		# Intel 700 Series Physical Function
180device		ixv		# Intel PRO/10GbE PCIE VF Ethernet Family
181device		glc		# Sony Playstation 3 Ethernet
182device		llan		# IBM pSeries Virtual Ethernet
183device		cxgbe		# Chelsio 10/25G NIC
184
185# PCI Ethernet NICs that use the common MII bus controller code.
186device		miibus		# MII bus support
187device		bge		# Broadcom BCM570xx Gigabit Ethernet
188device		gem		# Sun GEM/Sun ERI/Apple GMAC
189device		dc		# DEC/Intel 21143 and various workalikes
190device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
191device		re		# RealTek 8139C+/8169/8169S/8110S
192device		rl		# RealTek 8129/8139
193
194# Nvidia/Mellanox Connect-X 4 and later, Ethernet only
195# mlx5ib requires ibcore infra and is not included by default
196device		mlx5		# Base driver
197device		mlxfw		# Firmware update
198device		mlx5en		# Ethernet driver
199
200# Pseudo devices.
201device		crypto		# core crypto support
202device		loop		# Network loopback
203device		ether		# Ethernet support
204device		vlan		# 802.1Q VLAN support
205device		tuntap		# Packet tunnel.
206device		md		# Memory "disks"
207device		ofwd		# Open Firmware disks
208device		gif		# IPv6 and IPv4 tunneling
209device		firmware	# firmware assist module
210device		xz		# lzma decompression
211
212# The `bpf' device enables the Berkeley Packet Filter.
213# Be aware of the administrative consequences of enabling this!
214# Note that 'bpf' is required for DHCP.
215device		bpf		# Berkeley packet filter
216
217# USB support
218options 	USB_DEBUG	# enable debug msgs
219device		uhci		# UHCI PCI->USB interface
220device		ohci		# OHCI PCI->USB interface
221device		ehci		# EHCI PCI->USB interface
222device		xhci		# XHCI PCI->USB interface
223device		usb		# USB Bus (required)
224device		uhid		# "Human Interface Devices"
225device		ukbd		# Keyboard
226options 	KBD_INSTALL_CDEV # install a CDEV entry in /dev
227device		umass		# Disks/Mass storage - Requires scbus and da0
228device		ums		# Mouse
229# USB Ethernet
230device		aue		# ADMtek USB Ethernet
231device		axe		# ASIX Electronics USB Ethernet
232device		cdce		# Generic USB over Ethernet
233device		cue		# CATC USB Ethernet
234device		kue		# Kawasaki LSI USB Ethernet
235
236# Wireless NIC cards
237device		wlan		# 802.11 support
238options 	IEEE80211_SUPPORT_MESH	# enable 802.11s draft support
239options 	IEEE80211_DEBUG	# enable debug msgs
240device		wlan_wep	# 802.11 WEP support
241device		wlan_ccmp	# 802.11 CCMP support
242device		wlan_tkip	# 802.11 TKIP support
243device		wlan_amrr	# AMRR transmit rate control algorithm
244device		ath		# Atheros CardBus/PCI NICs
245device		ath_hal		# Atheros CardBus/PCI chip support
246options 	AH_AR5416_INTERRUPT_MITIGATION	# AR5416 interrupt mitigation
247options 	ATH_ENABLE_11N	# Enable 802.11n support for AR5416 and later
248device		ath_rate_sample	# SampleRate tx rate control for ath
249
250# FireWire support
251device		firewire	# FireWire bus code
252device		sbp		# SCSI over FireWire (Requires scbus and da)
253device		fwe		# Ethernet over FireWire (non-standard!)
254
255# Misc
256device		iicbus		# I2C bus code
257device		iic
258device		kiic		# Keywest I2C
259device		ad7417		# PowerMac7,2 temperature sensor
260device		ds1631		# PowerMac11,2 temperature sensor
261device		ds1775		# PowerMac7,2 temperature sensor
262device		fcu		# Apple Fan Control Unit
263device		max6690		# PowerMac7,2 temperature sensor
264device		powermac_nvram	# Open Firmware configuration NVRAM
265device		smu		# Apple System Management Unit
266device		atibl		# ATI-based backlight driver for PowerBooks/iBooks
267device		nvbl		# nVidia-based backlight driver for PowerBooks/iBooks
268device		opalflash	# PowerNV embedded flash memory
269
270# ADB support
271device		adb
272device		pmu
273
274# Sound support
275device		sound		# Generic sound driver (required)
276device		snd_ai2s	# Apple I2S audio
277device		snd_hda		# Intel High Definition Audio
278device		snd_uaudio	# USB Audio
279
280# Netmap provides direct access to TX/RX rings on supported NICs
281device		netmap		# netmap(4) support
282
283# evdev interface
284options 	EVDEV_SUPPORT		# evdev support in legacy drivers
285device		evdev			# input event device support
286device		uinput			# install /dev/uinput cdev
287
288# VirtIO support
289device          virtio                  # Generic VirtIO bus (required)
290device          virtio_pci              # VirtIO PCI device
291device          vtnet                   # VirtIO Ethernet device
292device          virtio_blk              # VirtIO Block device
293device          virtio_scsi             # VirtIO SCSI device
294device          virtio_balloon          # VirtIO Memory Balloon device
295
296# HID support
297options 	HID_DEBUG		# enable debug msgs
298device		hid			# Generic HID support
299