1 /*- 2 * SPDX-License-Identifier: BSD-3-Clause 3 * 4 * Copyright 2008 by Nathan Whitehorn. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 22 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 23 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 24 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 25 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30 #include <sys/cdefs.h> 31 __FBSDID("* $FreeBSD$"); 32 33 /* 34 * Common routines for the DMA engine on both the Apple Kauai and MacIO 35 * ATA controllers. 36 */ 37 38 #include <sys/param.h> 39 #include <sys/systm.h> 40 #include <sys/kernel.h> 41 #include <sys/module.h> 42 #include <sys/bus.h> 43 #include <sys/malloc.h> 44 #include <sys/sema.h> 45 #include <sys/taskqueue.h> 46 #include <vm/uma.h> 47 #include <machine/stdarg.h> 48 #include <machine/resource.h> 49 #include <machine/bus.h> 50 #include <sys/rman.h> 51 #include <sys/ata.h> 52 #include <dev/ata/ata-all.h> 53 #include <dev/ata/ata-pci.h> 54 #include <ata_if.h> 55 56 #include "ata_dbdma.h" 57 58 struct ata_dbdma_dmaload_args { 59 struct ata_dbdma_channel *sc; 60 61 int write; 62 int nsegs; 63 }; 64 65 static void 66 ata_dbdma_setprd(void *xarg, bus_dma_segment_t *segs, int nsegs, int error) 67 { 68 struct ata_dbdma_dmaload_args *arg = xarg; 69 struct ata_dbdma_channel *sc = arg->sc; 70 int branch_type, command; 71 int prev_stop; 72 int i; 73 74 mtx_lock(&sc->dbdma_mtx); 75 76 prev_stop = sc->next_dma_slot-1; 77 if (prev_stop < 0) 78 prev_stop = 0xff; 79 80 for (i = 0; i < nsegs; i++) { 81 /* Loop back to the beginning if this is our last slot */ 82 if (sc->next_dma_slot == 0xff) 83 branch_type = DBDMA_ALWAYS; 84 else 85 branch_type = DBDMA_NEVER; 86 87 if (arg->write) { 88 command = (i + 1 < nsegs) ? DBDMA_OUTPUT_MORE : 89 DBDMA_OUTPUT_LAST; 90 } else { 91 command = (i + 1 < nsegs) ? DBDMA_INPUT_MORE : 92 DBDMA_INPUT_LAST; 93 } 94 95 dbdma_insert_command(sc->dbdma, sc->next_dma_slot++, 96 command, 0, segs[i].ds_addr, segs[i].ds_len, 97 DBDMA_NEVER, branch_type, DBDMA_NEVER, 0); 98 99 if (branch_type == DBDMA_ALWAYS) 100 sc->next_dma_slot = 0; 101 } 102 103 /* We have a corner case where the STOP command is the last slot, 104 * but you can't branch in STOP commands. So add a NOP branch here 105 * and the STOP in slot 0. */ 106 107 if (sc->next_dma_slot == 0xff) { 108 dbdma_insert_branch(sc->dbdma, sc->next_dma_slot, 0); 109 sc->next_dma_slot = 0; 110 } 111 112 #if 0 113 dbdma_insert_command(sc->dbdma, sc->next_dma_slot++, 114 DBDMA_NOP, 0, 0, 0, DBDMA_ALWAYS, DBDMA_NEVER, DBDMA_NEVER, 0); 115 #endif 116 dbdma_insert_stop(sc->dbdma, sc->next_dma_slot++); 117 dbdma_insert_nop(sc->dbdma, prev_stop); 118 119 dbdma_sync_commands(sc->dbdma, BUS_DMASYNC_PREWRITE); 120 121 mtx_unlock(&sc->dbdma_mtx); 122 123 arg->nsegs = nsegs; 124 } 125 126 static int 127 ata_dbdma_status(device_t dev) 128 { 129 struct ata_dbdma_channel *sc = device_get_softc(dev); 130 struct ata_channel *ch = device_get_softc(dev); 131 132 if (sc->sc_ch.dma.flags & ATA_DMA_ACTIVE) { 133 return (!(dbdma_get_chan_status(sc->dbdma) & 134 DBDMA_STATUS_ACTIVE)); 135 } 136 137 if (ATA_IDX_INB(ch, ATA_ALTSTAT) & ATA_S_BUSY) { 138 DELAY(100); 139 if (ATA_IDX_INB(ch, ATA_ALTSTAT) & ATA_S_BUSY) 140 return 0; 141 } 142 return 1; 143 } 144 145 static int 146 ata_dbdma_start(struct ata_request *request) 147 { 148 struct ata_dbdma_channel *sc = device_get_softc(request->parent); 149 150 sc->sc_ch.dma.flags |= ATA_DMA_ACTIVE; 151 dbdma_wake(sc->dbdma); 152 return 0; 153 } 154 155 static void 156 ata_dbdma_reset(device_t dev) 157 { 158 struct ata_dbdma_channel *sc = device_get_softc(dev); 159 160 mtx_lock(&sc->dbdma_mtx); 161 162 dbdma_stop(sc->dbdma); 163 dbdma_insert_stop(sc->dbdma, 0); 164 sc->next_dma_slot=1; 165 dbdma_set_current_cmd(sc->dbdma, 0); 166 167 sc->sc_ch.dma.flags &= ~ATA_DMA_ACTIVE; 168 169 mtx_unlock(&sc->dbdma_mtx); 170 } 171 172 static int 173 ata_dbdma_stop(struct ata_request *request) 174 { 175 struct ata_dbdma_channel *sc = device_get_softc(request->parent); 176 177 uint16_t status; 178 179 status = dbdma_get_chan_status(sc->dbdma); 180 181 dbdma_pause(sc->dbdma); 182 sc->sc_ch.dma.flags &= ~ATA_DMA_ACTIVE; 183 184 if (status & DBDMA_STATUS_DEAD) { 185 device_printf(request->parent,"DBDMA dead, resetting " 186 "channel...\n"); 187 ata_dbdma_reset(request->parent); 188 return ATA_S_ERROR; 189 } 190 191 if (!(status & DBDMA_STATUS_RUN)) { 192 device_printf(request->parent,"DBDMA confused, stop called " 193 "when channel is not running!\n"); 194 return ATA_S_ERROR; 195 } 196 197 if (status & DBDMA_STATUS_ACTIVE) { 198 device_printf(request->parent,"DBDMA channel stopped " 199 "prematurely\n"); 200 return ATA_S_ERROR; 201 } 202 return 0; 203 } 204 205 static int 206 ata_dbdma_load(struct ata_request *request, void *addr, int *entries) 207 { 208 struct ata_channel *ch = device_get_softc(request->parent); 209 struct ata_dbdma_dmaload_args args; 210 211 int error; 212 213 args.sc = device_get_softc(request->parent); 214 args.write = !(request->flags & ATA_R_READ); 215 216 if (!request->bytecount) { 217 device_printf(request->dev, 218 "FAILURE - zero length DMA transfer attempted\n"); 219 return EIO; 220 } 221 if (((uintptr_t)(request->data) & (ch->dma.alignment - 1)) || 222 (request->bytecount & (ch->dma.alignment - 1))) { 223 device_printf(request->dev, 224 "FAILURE - non aligned DMA transfer attempted\n"); 225 return EIO; 226 } 227 if (request->bytecount > ch->dma.max_iosize) { 228 device_printf(request->dev, 229 "FAILURE - oversized DMA transfer attempt %d > %d\n", 230 request->bytecount, ch->dma.max_iosize); 231 return EIO; 232 } 233 234 request->dma = &ch->dma.slot[0]; 235 236 if ((error = bus_dmamap_load(request->dma->data_tag, 237 request->dma->data_map, request->data, request->bytecount, 238 &ata_dbdma_setprd, &args, BUS_DMA_NOWAIT))) { 239 device_printf(request->dev, "FAILURE - load data\n"); 240 goto error; 241 } 242 243 if (entries) 244 *entries = args.nsegs; 245 246 bus_dmamap_sync(request->dma->sg_tag, request->dma->sg_map, 247 BUS_DMASYNC_PREWRITE); 248 bus_dmamap_sync(request->dma->data_tag, request->dma->data_map, 249 (request->flags & ATA_R_READ) ? 250 BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE); 251 252 return 0; 253 254 error: 255 ch->dma.unload(request); 256 return EIO; 257 } 258 259 void 260 ata_dbdma_dmainit(device_t dev) 261 { 262 struct ata_dbdma_channel *sc = device_get_softc(dev); 263 int error; 264 265 error = dbdma_allocate_channel(sc->dbdma_regs, sc->dbdma_offset, 266 bus_get_dma_tag(dev), 256, &sc->dbdma); 267 268 dbdma_set_wait_selector(sc->dbdma,1 << 7, 1 << 7); 269 270 dbdma_insert_stop(sc->dbdma,0); 271 sc->next_dma_slot=1; 272 273 sc->sc_ch.dma.start = ata_dbdma_start; 274 sc->sc_ch.dma.stop = ata_dbdma_stop; 275 sc->sc_ch.dma.load = ata_dbdma_load; 276 sc->sc_ch.dma.reset = ata_dbdma_reset; 277 278 /* 279 * DBDMA's field for transfer size is 16 bits. This will overflow 280 * if we try to do a 64K transfer, so stop short of 64K. 281 */ 282 sc->sc_ch.dma.segsize = 126 * DEV_BSIZE; 283 ata_dmainit(dev); 284 285 sc->sc_ch.hw.status = ata_dbdma_status; 286 287 mtx_init(&sc->dbdma_mtx, "ATA DBDMA", NULL, MTX_DEF); 288 } 289