xref: /freebsd/sys/powerpc/powermac/pswitch.c (revision b0b1dbdd)
1 /*-
2  * Copyright (C) 2002 Benno Rice.
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY Benno Rice ``AS IS'' AND ANY EXPRESS OR
15  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
16  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
17  * IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
18  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
19  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
20  * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
21  * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
22  * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
23  * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
24  *
25  * $FreeBSD$
26  */
27 
28 #include "opt_ddb.h"
29 
30 #include <sys/param.h>
31 #include <sys/systm.h>
32 #include <sys/kdb.h>
33 #include <sys/kernel.h>
34 #include <sys/module.h>
35 #include <sys/malloc.h>
36 #include <sys/bus.h>
37 #include <machine/bus.h>
38 #include <sys/rman.h>
39 
40 #include <machine/resource.h>
41 
42 #include <dev/ofw/openfirm.h>
43 
44 #include <powerpc/powermac/maciovar.h>
45 
46 struct pswitch_softc {
47 	int	sc_irqrid;
48 	struct	resource *sc_irq;
49 	void	*sc_ih;
50 };
51 
52 static int	pswitch_probe(device_t);
53 static int	pswitch_attach(device_t);
54 
55 static int	pswitch_intr(void *);
56 
57 static device_method_t pswitch_methods[] = {
58 	/* Device interface */
59 	DEVMETHOD(device_probe,		pswitch_probe),
60 	DEVMETHOD(device_attach,	pswitch_attach),
61 
62 	{ 0, 0 }
63 };
64 
65 static driver_t pswitch_driver = {
66 	"pswitch",
67 	pswitch_methods,
68 	sizeof(struct pswitch_softc)
69 };
70 
71 static devclass_t pswitch_devclass;
72 
73 DRIVER_MODULE(pswitch, macio, pswitch_driver, pswitch_devclass, 0, 0);
74 
75 static int
76 pswitch_probe(device_t dev)
77 {
78 	char	*type = macio_get_devtype(dev);
79 
80 	if (strcmp(type, "gpio") != 0)
81 		return (ENXIO);
82 
83 	device_set_desc(dev, "GPIO Programmer's Switch");
84 	return (0);
85 }
86 
87 static int
88 pswitch_attach(device_t dev)
89 {
90 	struct		pswitch_softc *sc;
91 	phandle_t	node, child;
92 	char		type[32];
93 	u_int		irq[2];
94 
95 	sc = device_get_softc(dev);
96 	node = macio_get_node(dev);
97 
98 	for (child = OF_child(node); child != 0; child = OF_peer(child)) {
99 		if (OF_getprop(child, "device_type", type, 32) == -1)
100 			continue;
101 
102 		if (strcmp(type, "programmer-switch") == 0)
103 			break;
104 	}
105 
106 	if (child == 0) {
107 		device_printf(dev, "could not find correct node\n");
108 		return (ENXIO);
109 	}
110 
111 	if (OF_getprop(child, "interrupts", irq, sizeof(irq)) == -1) {
112 		device_printf(dev, "could not get interrupt\n");
113 		return (ENXIO);
114 	}
115 
116 	sc->sc_irqrid = 0;
117 	sc->sc_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &sc->sc_irqrid,
118 	    irq[0], irq[0], 1, RF_ACTIVE);
119 	if (sc->sc_irq == NULL) {
120 		device_printf(dev, "could not allocate interrupt\n");
121 		return (ENXIO);
122 	}
123 
124 	if (bus_setup_intr(dev, sc->sc_irq, INTR_TYPE_MISC,
125 	    pswitch_intr, NULL, dev, &sc->sc_ih) != 0) {
126 		device_printf(dev, "could not setup interrupt\n");
127 		bus_release_resource(dev, SYS_RES_IRQ, sc->sc_irqrid,
128 		    sc->sc_irq);
129 		return (ENXIO);
130 	}
131 
132 	return (0);
133 }
134 
135 static int
136 pswitch_intr(void *arg)
137 {
138 	device_t	dev;
139 
140 	dev = (device_t)arg;
141 
142 	kdb_enter(KDB_WHY_POWERPC, device_get_nameunit(dev));
143 	return (FILTER_HANDLED);
144 }
145